Commit graph

268 commits

Author SHA1 Message Date
Rafael J. Wysocki
d9f67dbc0f Merge branch 'pm-tools'
* pm-tools:
  x86: remove unused definition of MSR_NHM_PLATFORM_INFO
  tools/power turbostat: use new name for MSR_PLATFORM_INFO
2015-11-16 22:57:02 +01:00
Len Brown
ec0adc539b tools/power turbostat: use new name for MSR_PLATFORM_INFO
MSR_PLATFORM_INFO is the new name for MSR_NHM_PLATFORM_INFO

no functional change

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-13 23:27:13 +01:00
Rafael J. Wysocki
f57ab32a84 Merge branch 'pm-tools'
* pm-tools:
  Creating a common structure initialization pattern for struct option
  cpupower: Enable disabled Cstates if they are below max latency
  cpupower: Remove debug message when using cpupower idle-set -D switch
  cpupower: cpupower monitor reports uninitialized values for offline cpus
  tools/power turbostat: bugfix: print MAX_NON_TURBO_RATIO
  tools/power turbostat: simplify Bzy_MHz calculation
2015-11-12 00:22:56 +01:00
Rafael J. Wysocki
89ba7d8c22 Merge branch 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux into pm-tools
Pull turbostat changes for v4.4 from Len Brown.

* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: bugfix: print MAX_NON_TURBO_RATIO
  tools/power turbostat: simplify Bzy_MHz calculation
2015-11-11 00:01:21 +01:00
Sriram Raghunathan
57ab3b0872 Creating a common structure initialization pattern for struct option
This patch tries to creates a common structure initialization
within the cpupower tool.

Previously the ``struct option`` was initialized
using `designated initializer` technique which was
not needed. There were conflicting initialization methods seen with

bench/main.c & others.

Signed-off-by: Sriram Raghunathan <sriram@marirs.net.in>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-02 02:28:59 +01:00
Thomas Renninger
19c9fb896f cpupower: Enable disabled Cstates if they are below max latency
cpupower idle-set -D <latency>
currently only disables all C-states that have a higher latency than the
specified <latency>. But if deep sleep states were already disabled and
have a lower latency, they should get enabled again.

For example:
This call:
cpupower idle-set -D 30
disables all C-states with a higher or equal latency than 30.
If one then calls:
cpupower idle-set -D 100
C-states with a latency between 30-99 will get enabled again with this patch
now. It is ensured that only C-states with a latency of 100 and higher are
disabled.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-02 02:28:59 +01:00
Thomas Renninger
645209472d cpupower: Remove debug message when using cpupower idle-set -D switch
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-02 02:28:59 +01:00
Jacob Tanenbaum
20102ac5be cpupower: cpupower monitor reports uninitialized values for offline cpus
[root@hp-dl980g7-02 linux]# cpupower monitor
...
5472|   0|   1|******|******|******|******|| 0.00|  0.00|  0.00|  0.00|  0.00 *is offline
10567|   0| 159|******|******|******|******||  0.00|  0.00|  0.00|  0.00|  0.00 *is offline
1661206560|859272560| 150|******|******|******|******|| 0.00|  0.00|  0.00|  0.00|  0.00 *is offline
1661206560|943093104| 140|******|******|******|******|| 0.00|  0.00|  0.00|  0.00|  0.00 *is offline

because of this cpupower also holds the incorrect value for the number
of physical packages in the machine

Changed cpupower to initialize the values of an offline cpu's socket and
core to -1, warn the user that one or more cpus is/are
offline and not print statistics for offline cpus.

This fix hides offlined cores where topology cannot be accessed.
With a recent kernel patch suggested from Prarit Bhargava it may be possible
that soft offlined cores' topology can still be parsed.
This patch would then show which cores in which package/socket are offline,
when sane toplogoy information is available.

Signed-off-by: Jacob Tanenbaum <jtanenba@redhat.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-02 02:28:59 +01:00
Len Brown
759d2a932b tools/power turbostat: bugfix: print MAX_NON_TURBO_RATIO
MSR_TURBO_ACTIVATION_RATIO: 0x00000016 (MAX_NON_TURBO_RATIO=6 lock=0)
should print all 7 bits of MAX_NON_TURBO_RATIO (in decimal):
MSR_TURBO_ACTIVATION_RATIO: 0x00000016 (MAX_NON_TURBO_RATIO=22 lock=0)

Signed-off-by: Len Brown <len.brown@intel.com>
2015-10-22 02:42:12 -04:00
Bob Moore
842e71332e ACPICA: iASL: General cleanup of the file suffix #defines
ACPICA commit bed456ed2976bdaafdef406b982fdf6c539befc0

Removed some extraneous defines, reordered others.

Link: https://github.com/acpica/acpica/commit/bed456ed
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-22 02:01:12 +02:00
Len Brown
21ed5574d1 tools/power turbostat: simplify Bzy_MHz calculation
Bzy_MHz = TSC_delta*tsc_tweak/APERF_delta/MPERF_delta/measurement_interval

becomes

    Bzy_MHz = base_mhz/APERF_delta/MPERF_delta

on systems which support MSR_NHM_PLATFORM_INFO.

base_mhz is calculated directly from the base_ratio
reported in MSR_NHM_PLATFORM_INFO * bclk,
and bclk is discovered via MSR or cpuid.

This reduces the dependency of Bzy_MHz calculation on the TSC.
Previously, there were 4 TSC readings required in each caculation,
the raw TSC delta combined with the measurement_interval.
This also removes the "tsc_tweak" correction factor used when
TSC runs on a different base clock from the CPU's bclk.

After this change, tsc_tweak is used only for %Busy.

The end-result should be a Bzy_MHz result slightly less prone to jitter.

Signed-off-by: Len Brown <len.brown@intel.com>
2015-10-19 22:50:01 -04:00
Len Brown
af71b980c0 tools/power turbosat: update version number
Signed-off-by: Len Brown <len.brown@intel.com>
2015-09-26 09:49:55 -04:00
Len Brown
a2b7b74945 tools/power turbostat: SKL: Adjust for TSC difference from base frequency
On a Skylake with 1500MHz base frequency,
the TSC runs at 1512MHz.

This is because the TSC is no longer in the n*100 MHz BCLK domain,
but is now in the m*24MHz crystal clock domain. (24 MHz * 63 = 1512 MHz)

This adds error to several calculations in turbostat,
unless the TSC sample sizes are adjusted for this difference.

Note that calculations in the time domain are immune
from this issue, as the timing sub-system has already
calibrated the TSC against a known wall clock.

AVG_MHz = APERF_delta/measurement_interval

	need no adjustment.  APERF_delta is in the BCLK domain,
	and measurement_interval is in the time domain.

TSC_MHz  =  TSC_delta/measurement_interval

	needs no adjustment -- as we really do want to report
	the actual measured TSC delta here, and measurement_interval
	is in the accurate time domain.

%Busy = MPERF_delta/TSC_delta

	needs adjustment to use TSC_BCLK_DOMAIN_delta.
	TSC_BCLK_DOMAIN_delta = TSC_delta * base_hz / tsc_hz

Bzy_MHz = TSC_delta/APERF_delta/MPERF_delta/measurement_interval

	need adjustment as above.

No other metrics in turbostat need to be adjusted.

Before:

     CPU Avg_MHz   %Busy Bzy_MHz TSC_MHz
       -     550   24.84    2216    1512
       0    2191   98.73    2219    1514
       2       0    0.01    2130    1512
       1       9    0.43    2016    1512
       3       2    0.08    2016    1512

After:

     CPU Avg_MHz   %Busy Bzy_MHz TSC_MHz
       -     550   25.05    2198    1512
       0    2190   99.62    2199    1512
       2       0    0.01    2152    1512
       1       9    0.46    2000    1512
       3       2    0.10    2000    1512

Note that in this example, the "Before" Bzy_MHz
was reported as exceeding the 2200 max turbo rate.
Also, even a pinned spin loop would not be reported
as over 99% busy.

Signed-off-by: Len Brown <len.brown@intel.com>
2015-09-26 00:50:54 -04:00
Hubert Chrzaniuk
b2b34dfe4d tools/power turbostat: KNL workaround for %Busy and Avg_MHz
KNL increments APERF and MPERF every 1024 clocks.
This is compliant with the architecture specification,
which requires that only the ratio of APERF/MPERF need be valid.

However, turbostat takes advantage of the fact that these
two MSRs increment every un-halted clock
at the actual and base frequency:

AVG_MHz = APERF_delta/measurement_interval

%Busy = MPERF_delta/TSC_delta

This quirk is needed for these calculations to also work on KNL,
which would otherwise show a value 1024x smaller than expected.

Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2015-09-26 00:50:54 -04:00
Len Brown
756357b8e4 tools/power turbostat: IVB Xeon: fix --debug regression
Staring in Linux-4.3-rc1,
commit 6fb3143b56 ("tools/power turbostat: dump CONFIG_TDP")
touches MSR 0x648, which is not supported on IVB-Xeon.
This results in "turbostat --debug" exiting on those systems:

turbostat: /dev/cpu/2/msr offset 0x648 read failed: Input/output error

Remove IVB-Xeon from the list of machines supporting with that MSR.

Signed-off-by: Len Brown <len.brown@intel.com>
2015-09-26 00:50:48 -04:00
Linus Torvalds
ae98207309 Power management and ACPI material for v4.3-rc1
- ACPICA update to upstream revision 20150818 including method
    tracing extensions to allow more in-depth AML debugging in the
    kernel and a number of assorted fixes and cleanups (Bob Moore,
    Lv Zheng, Markus Elfring).
 
  - ACPI sysfs code updates and a documentation update related to
    AML method tracing (Lv Zheng).
 
  - ACPI EC driver fix related to serialized evaluations of _Qxx
    methods and ACPI tools updates allowing the EC userspace tool
    to be built from the kernel source (Lv Zheng).
 
  - ACPI processor driver updates preparing it for future
    introduction of CPPC support and ACPI PCC mailbox driver
    updates (Ashwin Chaugule).
 
  - ACPI interrupts enumeration fix for a regression related
    to the handling of IRQ attribute conflicts between MADT
    and the ACPI namespace (Jiang Liu).
 
  - Fixes related to ACPI device PM (Mika Westerberg, Srinidhi Kasagar).
 
  - ACPI device registration code reorganization to separate the
    sysfs-related code and bus type operations from the rest (Rafael
    J Wysocki).
 
  - Assorted cleanups in the ACPI core (Jarkko Nikula, Mathias Krause,
    Andy Shevchenko, Rafael J Wysocki, Nicolas Iooss).
 
  - ACPI cpufreq driver and ia64 cpufreq driver fixes and cleanups
    (Pan Xinhui, Rafael J Wysocki).
 
  - cpufreq core cleanups on top of the previous changes allowing it
    to preseve its sysfs directories over system suspend/resume (Viresh
    Kumar, Rafael J Wysocki, Sebastian Andrzej Siewior).
 
  - cpufreq fixes and cleanups related to governors (Viresh Kumar).
 
  - cpufreq updates (core and the cpufreq-dt driver) related to the
    turbo/boost mode support (Viresh Kumar, Bartlomiej Zolnierkiewicz).
 
  - New DT bindings for Operating Performance Points (OPP), support
    for them in the OPP framework and in the cpufreq-dt driver plus
    related OPP framework fixes and cleanups (Viresh Kumar).
 
  - cpufreq powernv driver updates (Shilpasri G Bhat).
 
  - New cpufreq driver for Mediatek MT8173 (Pi-Cheng Chen).
 
  - Assorted cpufreq driver (speedstep-lib, sfi, integrator) cleanups
    and fixes (Abhilash Jindal, Andrzej Hajda, Cristian Ardelean).
 
  - intel_pstate driver updates including Skylake-S support, support
    for enabling HW P-states per CPU and an additional vendor bypass
    list entry (Kristen Carlson Accardi, Chen Yu, Ethan Zhao).
 
  - cpuidle core fixes related to the handling of coupled idle states
    (Xunlei Pang).
 
  - intel_idle driver updates including Skylake Client support and
    support for freeze-mode-specific idle states (Len Brown).
 
  - Driver core updates related to power management (Andy Shevchenko,
    Rafael J Wysocki).
 
  - Generic power domains framework fixes and cleanups (Jon Hunter,
    Geert Uytterhoeven, Rajendra Nayak, Ulf Hansson).
 
  - Device PM QoS framework update to allow the latency tolerance
    setting to be exposed to user space via sysfs (Mika Westerberg).
 
  - devfreq support for PPMUv2 in Exynos5433 and a fix for an incorrect
    exynos-ppmu DT binding (Chanwoo Choi, Javier Martinez Canillas).
 
  - System sleep support updates (Alan Stern, Len Brown, SungEun Kim).
 
  - rockchip-io AVS support updates (Heiko Stuebner).
 
  - PM core clocks support fixup (Colin Ian King).
 
  - Power capping RAPL driver update including support for Skylake H/S
    and Broadwell-H (Radivoje Jovanovic, Seiichi Ikarashi).
 
  - Generic device properties framework fixes related to the handling
    of static (driver-provided) property sets (Andy Shevchenko).
 
  - turbostat and cpupower updates (Len Brown, Shilpasri G Bhat,
    Shreyas B Prabhu).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJV5hhGAAoJEILEb/54YlRxs+EQAK51iFk48+IbpHYaZZ50Yo4m
 ZZc2zBcbwRcBlU9vKERrhG+jieSl8J/JJNxT8vBjKqyvNw038mCjewQh02ol0HuC
 R7nlDiVJkmZ50sLO4xwE/1UBZr/XqbddwCUnYzvFMkMTA0ePzFtf8BrJ1FXpT8S/
 fkwSXQty6hvJDwxkfrbMSaA730wMju9lahx8D6MlmUAedWYZOJDMQKB4WKa/St5X
 9uckBPHUBB2KiKlXxdbFPwKLNxHvLROq5SpDLc6cM/7XZB+QfNFy85CUjCUtYo1O
 1W8k0qnztvZ6UEv27qz5dejGyAGOarMWGGNsmL9evoeGeHRpQL+dom7HcTnbAfUZ
 walyhYSm/zKkdy7Vl3xWUUQkMG48+PviMI6K0YhHXb3Rm5wlR/yBNZTwNIty9SX/
 fKCHEa8QynWwLxgm53c3xRkiitJxMsHNK03moLD9zQMjshTyTNvpNbZoahyKQzk6
 H+9M1DBRHhkkREDWSwGutukxfEMtWe2vcZcyERrFiY7l5k1j58DwDBMPqjPhRv6q
 P/1NlCzr0XYf83Y86J18LbDuPGDhTjjIEn6CqbtI2mmWqTg3+rF7zvS2ux+FzMnA
 gisv8l6GT9JiWhxKFqqL/rrVpwtyHebWLYE/RpNUW6fEzLziRNj1qyYO9dqI/GGi
 I3rfxlXoc/5xJWCgNB8f
 =fTgI
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael Wysocki:
 "From the number of commits perspective, the biggest items are ACPICA
  and cpufreq changes with the latter taking the lead (over 50 commits).

  On the cpufreq front, there are many cleanups and minor fixes in the
  core and governors, driver updates etc.  We also have a new cpufreq
  driver for Mediatek MT8173 chips.

  ACPICA mostly updates its debug infrastructure and adds a number of
  fixes and cleanups for a good measure.

  The Operating Performance Points (OPP) framework is updated with new
  DT bindings and support for them among other things.

  We have a few updates of the generic power domains framework and a
  reorganization of the ACPI device enumeration code and bus type
  operations.

  And a lot of fixes and cleanups all over.

  Included is one branch from the MFD tree as it contains some
  PM-related driver core and ACPI PM changes a few other commits are
  based on.

  Specifics:

   - ACPICA update to upstream revision 20150818 including method
     tracing extensions to allow more in-depth AML debugging in the
     kernel and a number of assorted fixes and cleanups (Bob Moore, Lv
     Zheng, Markus Elfring).

   - ACPI sysfs code updates and a documentation update related to AML
     method tracing (Lv Zheng).

   - ACPI EC driver fix related to serialized evaluations of _Qxx
     methods and ACPI tools updates allowing the EC userspace tool to be
     built from the kernel source (Lv Zheng).

   - ACPI processor driver updates preparing it for future introduction
     of CPPC support and ACPI PCC mailbox driver updates (Ashwin
     Chaugule).

   - ACPI interrupts enumeration fix for a regression related to the
     handling of IRQ attribute conflicts between MADT and the ACPI
     namespace (Jiang Liu).

   - Fixes related to ACPI device PM (Mika Westerberg, Srinidhi
     Kasagar).

   - ACPI device registration code reorganization to separate the
     sysfs-related code and bus type operations from the rest (Rafael J
     Wysocki).

   - Assorted cleanups in the ACPI core (Jarkko Nikula, Mathias Krause,
     Andy Shevchenko, Rafael J Wysocki, Nicolas Iooss).

   - ACPI cpufreq driver and ia64 cpufreq driver fixes and cleanups (Pan
     Xinhui, Rafael J Wysocki).

   - cpufreq core cleanups on top of the previous changes allowing it to
     preseve its sysfs directories over system suspend/resume (Viresh
     Kumar, Rafael J Wysocki, Sebastian Andrzej Siewior).

   - cpufreq fixes and cleanups related to governors (Viresh Kumar).

   - cpufreq updates (core and the cpufreq-dt driver) related to the
     turbo/boost mode support (Viresh Kumar, Bartlomiej Zolnierkiewicz).

   - New DT bindings for Operating Performance Points (OPP), support for
     them in the OPP framework and in the cpufreq-dt driver plus related
     OPP framework fixes and cleanups (Viresh Kumar).

   - cpufreq powernv driver updates (Shilpasri G Bhat).

   - New cpufreq driver for Mediatek MT8173 (Pi-Cheng Chen).

   - Assorted cpufreq driver (speedstep-lib, sfi, integrator) cleanups
     and fixes (Abhilash Jindal, Andrzej Hajda, Cristian Ardelean).

   - intel_pstate driver updates including Skylake-S support, support
     for enabling HW P-states per CPU and an additional vendor bypass
     list entry (Kristen Carlson Accardi, Chen Yu, Ethan Zhao).

   - cpuidle core fixes related to the handling of coupled idle states
     (Xunlei Pang).

   - intel_idle driver updates including Skylake Client support and
     support for freeze-mode-specific idle states (Len Brown).

   - Driver core updates related to power management (Andy Shevchenko,
     Rafael J Wysocki).

   - Generic power domains framework fixes and cleanups (Jon Hunter,
     Geert Uytterhoeven, Rajendra Nayak, Ulf Hansson).

   - Device PM QoS framework update to allow the latency tolerance
     setting to be exposed to user space via sysfs (Mika Westerberg).

   - devfreq support for PPMUv2 in Exynos5433 and a fix for an incorrect
     exynos-ppmu DT binding (Chanwoo Choi, Javier Martinez Canillas).

   - System sleep support updates (Alan Stern, Len Brown, SungEun Kim).

   - rockchip-io AVS support updates (Heiko Stuebner).

   - PM core clocks support fixup (Colin Ian King).

   - Power capping RAPL driver update including support for Skylake H/S
     and Broadwell-H (Radivoje Jovanovic, Seiichi Ikarashi).

   - Generic device properties framework fixes related to the handling
     of static (driver-provided) property sets (Andy Shevchenko).

   - turbostat and cpupower updates (Len Brown, Shilpasri G Bhat,
     Shreyas B Prabhu)"

* tag 'pm+acpi-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (180 commits)
  cpufreq: speedstep-lib: Use monotonic clock
  cpufreq: powernv: Increase the verbosity of OCC console messages
  cpufreq: sfi: use kmemdup rather than duplicating its implementation
  cpufreq: drop !cpufreq_driver check from cpufreq_parse_governor()
  cpufreq: rename cpufreq_real_policy as cpufreq_user_policy
  cpufreq: remove redundant 'policy' field from user_policy
  cpufreq: remove redundant 'governor' field from user_policy
  cpufreq: update user_policy.* on success
  cpufreq: use memcpy() to copy policy
  cpufreq: remove redundant CPUFREQ_INCOMPATIBLE notifier event
  cpufreq: mediatek: Add MT8173 cpufreq driver
  dt-bindings: mediatek: Add MT8173 CPU DVFS clock bindings
  PM / Domains: Fix typo in description of genpd_dev_pm_detach()
  PM / Domains: Remove unusable governor dummies
  PM / Domains: Make pm_genpd_init() available to modules
  PM / domains: Align column headers and data in pm_genpd_summary output
  powercap / RAPL: disable the 2nd power limit properly
  tools: cpupower: Fix error when running cpupower monitor
  PM / OPP: Drop unlikely before IS_ERR(_OR_NULL)
  PM / OPP: Fix static checker warning (broken 64bit big endian systems)
  ...
2015-09-01 19:45:46 -07:00
Rafael J. Wysocki
e625ccec1f Merge branches 'pm-tools' and 'powercap'
* pm-tools:
  tools: cpupower: Fix error when running cpupower monitor
  tools/power turbostat: fix typo on DRAM column in Joules-mode
  cpupower: Do not change the frequency of offline cpu
  tools/power turbostat: fix parameter passing for forked command
  tools/power turbostat: dump CONFIG_TDP
  tools/power turbostat: cpu0 is no longer hard-coded, so  update output
  tools/power turbostat: update turbostat(8)

* powercap:
  powercap / RAPL: disable the 2nd power limit properly
  powercap / RAPL: Add support for Broadwell-H
  powercap / RAPL: Add support for Skylake H/S
2015-09-01 15:54:30 +02:00
Shreyas B. Prabhu
404c2db635 tools: cpupower: Fix error when running cpupower monitor
get_cpu_topology() tries to get topology info from all cpus by reading
files in the topology sysfs dir. If a cpu is offlined, since it doesn't
have topology dir, this function fails and returns -1. This causes
functions relying on get_cpu_topology() to fail. For example-

$ cpupower monitor
Cannot read number of available processors

Fix this by skipping fetching topology info for offline cpus.

Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Reported-by: Pavaman Subramaniyam <pavsubra@linux.vnet.ibm.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-29 01:38:16 +02:00
Rafael J. Wysocki
82bb70c599 Merge branch 'turbostat' of https://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux into pm-tools
Pull turbostat changes for v4.3 from Len Brown.

* 'turbostat' of https://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: fix typo on DRAM column in Joules-mode
  tools/power turbostat: fix parameter passing for forked command
  tools/power turbostat: dump CONFIG_TDP
  tools/power turbostat: cpu0 is no longer hard-coded, so  update output
  tools/power turbostat: update turbostat(8)
2015-08-24 23:10:02 +02:00
Lv Zheng
4305cd0243 tools/power/acpi: Enable build for EC userspace tool
This patch allows EC userspace tool to be built as an ACPI tool.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-31 23:39:31 +02:00
Lv Zheng
391fc234b5 tools/power/acpi: Add descend support in ACPI tools Makefile
This patch splits tools/power/acpi/Makefile to support descend compling for
ACPI tools. In this patch tools/ec related stuff is removed as it is
originally not enabled.

Also a missing .o (utnonansi.o) is added to the acpidump/Makefile.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-31 23:39:31 +02:00
Len Brown
bd6906ed3d tools/power turbostat: fix typo on DRAM column in Joules-mode
< RAM_W
> RAM_J

Reported-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2015-07-24 10:35:23 -04:00
Shilpasri G Bhat
2e5e8fd1ff cpupower: Do not change the frequency of offline cpu
Check if the cpu is online before changing the frequency/governor of
the cpu.

Reported-by: Pavaman Subramaniyam <pavsubra@linux.vnet.ibm.com>
Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Acked-by: Thomas Renninger <trenn@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-23 20:40:51 +02:00
Len Brown
a01e72fbc4 tools/power turbostat: fix parameter passing for forked command
turbostat supports forked command when sampling cpu state. However,
the forked command is not allowed to be executed with options, otherwise
turbostat might regard these options as invalid turbostat options.

For example:

./turbostat stress -c 4 -t 10
./turbostat: unrecognized option '-t'

Reported-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2015-07-15 21:49:41 -04:00
Andy Lutomirski
4ea1636b04 x86/asm/tsc: Rename native_read_tsc() to rdtsc()
Now that there is no paravirt TSC, the "native" is
inappropriate. The function does RDTSC, so give it the obvious
name: rdtsc().

Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm ML <kvm@vger.kernel.org>
Link: http://lkml.kernel.org/r/fd43e16281991f096c1e4d21574d9e1402c62d39.1434501121.git.luto@kernel.org
[ Ported it to v4.2-rc1. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06 15:23:28 +02:00
Andy Lutomirski
87be28aaf1 x86/asm/tsc: Replace rdtscll() with native_read_tsc()
Now that the ->read_tsc() paravirt hook is gone, rdtscll() is
just a wrapper around native_read_tsc(). Unwrap it.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm ML <kvm@vger.kernel.org>
Link: http://lkml.kernel.org/r/d2449ae62c1b1fb90195bcfb19ef4a35883a04dc.1434501121.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06 15:23:26 +02:00
Linus Torvalds
9bdc771f2c Additional ACPICA material for v4.2-rc1
- Fix system resume problems related to 32-bit and 64-bit versions
    of the Firmware ACPI Control Structure (FACS) in the firmare (Lv
    Zheng).
 
  - Fix double initialization of the FACS (Lv Zheng).
 
  - Add _CLS object processing code to ACPICA (Suravee Suthikulpanit).
 
  - Add support for the (currently missing) new GIC version field in
    the Multiple APIC Description Table (MADT) (Hanjun Guo).
 
  - Add support for overriding objects in the ACPI namespace to
    ACPICA and OSDT support (Lv Zheng, Bob Moore, Zhang Rui).
 
  - Updates related to the TCPA and TPM2 ACPI tables (Bob Moore).
 
  - Restore the commit modifying _REV to always return "2" (as
    required by ACPI 6) and add a blacklisting mechanism for
    systems that may be affected by that change (Rafael J Wysocki).
 
  - Assorted fixes and cleanups (Bob Moore, Lv Zheng, Sascha Wildner).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJVlcwtAAoJEILEb/54YlRx/IwQAKMZaZZni2HhJ/ASBVAtF4zp
 RNaS+XiTzLg2HIIR0QjRE9LT2CH3Zw2l99XzU91SqS2UfvTr+YJjnSNq3PllAgrT
 SsFv5fVJZr7VfJw7gbARhOXp926INfDRqKp5WvpQ3XCFclCQRNbqzn0PD1ouooVQ
 x4IhhFlxyCIOHwbINS//CsJ8H+PT7aUc2kSgEKGbVWFfKE9jfTCx1Nekh2GoEqf+
 wutzaMmCoQsf0kVNldgEnF2vxIxwgcXkhYxBBdnGBl2afJz+THsPaJP6Bx6JNA+S
 iaFh+iyo70jeJ4ouBxJc0E46g+pDOJdP71VQhexFu3c7OU+wmhyv30/f4SwxXLOD
 +H8OhOMXFLff9PS+BVU4iR7t5SikZzbXc/AjuM6es1UT+k8zOlo+fRL1I8dXDF6V
 t4GiT6hz/MX30cP3aumXtQ2dl9TksWPtfoerSjo1EowY6wPZ+WpJ2bmp5uecIDGV
 TNdC4pKjDVgbFP889mZF4pG198uR4UV1gRCf4gvwEyiNMFd3xRbFhs4r7AkiSQLn
 fy+V7MlgFiFaB6Ej/AU01fjarOPPSiv8uFWAZL4e9R/88UgfVVq0aFonw/r5l4jj
 3rJBOH7YxNxGBhRjTL+d7cwruED6G/K2S0QbD2kZBOSHrouz1fuLFdvgKj8ahqyJ
 VfQZs9A3PSv/v1wssUr/
 =MlWS
 -----END PGP SIGNATURE-----

Merge tag 'acpica-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPICA updates from Rafael Wysocki:
 "Additional ACPICA material for v4.2-rc1

  This will update the ACPICA code in the kernel to upstream revision
  20150619 (a bug-fix release mostly including stable-candidate fixes)
  and restore an earlier ACPICA commit that had to be reverted due to a
  regression introduced by it (the regression is addressed by
  blacklisting the only known system affected by it to date).

  The only new feature added by this update is the support for
  overriding objects in the ACPI namespace and a new ACPI table that can
  be used for that called the Override System Definition Table (OSDT).
  That should allow us to "patch" the ACPI namespace built from
  incomplete or incorrect ACPI System Definition tables (DSDT, SSDT)
  during system startup without the need to provide replacements for all
  of those tables in the future.

  Specifics:

   - Fix system resume problems related to 32-bit and 64-bit versions of
     the Firmware ACPI Control Structure (FACS) in the firmare (Lv
     Zheng)

   - Fix double initialization of the FACS (Lv Zheng)

   - Add _CLS object processing code to ACPICA (Suravee Suthikulpanit)

   - Add support for the (currently missing) new GIC version field in
     the Multiple APIC Description Table (MADT) (Hanjun Guo)

   - Add support for overriding objects in the ACPI namespace to ACPICA
     and OSDT support (Lv Zheng, Bob Moore, Zhang Rui)

   - Updates related to the TCPA and TPM2 ACPI tables (Bob Moore)

   - Restore the commit modifying _REV to always return "2" (as required
     by ACPI 6) and add a blacklisting mechanism for systems that may be
     affected by that change (Rafael J Wysocki)

   - Assorted fixes and cleanups (Bob Moore, Lv Zheng, Sascha Wildner)"

* tag 'acpica-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (28 commits)
  Revert 'Revert "ACPICA: Permanently set _REV to the value '2'."'
  ACPI / init: Make it possible to override _REV
  ACPICA: Update version to 20150619
  ACPICA: Comment update, no functional change
  ACPICA: Update TPM2 ACPI table
  ACPICA: Update definitions for the TCPA and TPM2 ACPI tables
  ACPICA: Split C library prototypes to new header
  ACPICA: De-macroize calls to standard C library functions
  ACPI / acpidump: Update acpidump manual
  ACPICA: acpidump: Convert the default behavior to dump from /sys/firmware/acpi/tables
  ACPICA: acpidump: Allow customized tables to be dumped without accessing /dev/mem
  ACPICA: Cleanup output for the ASL Debug object
  ACPICA: Update for acpi_install_table memory types
  ACPICA: Namespace: Change namespace override to avoid node deletion
  ACPICA: Namespace: Add support of OSDT table
  ACPICA: Namespace: Add support to allow overriding objects
  ACPICA: ACPI 6.0: Add values for MADT GIC version field
  ACPICA: Utilities: Add _CLS processing
  ACPICA: Add dragon_fly support to unix file mapping file
  ACPICA: EFI: Add EFI interface definitions to eliminate dependency of GNU EFI
  ...
2015-07-02 17:11:28 -07:00
Bob Moore
4fa4616e27 ACPICA: De-macroize calls to standard C library functions
ACPICA commit 3b1026e0bdd3c32eb6d5d313f3ba0b1fee7597b4
ACPICA commit 00f0dc83f5cfca53b27a3213ae0d7719b88c2d6b
ACPICA commit 47d22a738d0e19fd241ffe4e3e9d4e198e4afc69

Across all of ACPICA. Replace C library macros such as ACPI_STRLEN with the
standard names such as strlen. The original purpose for these macros is
long since obsolete.
Also cast various invocations as necessary. Bob Moore, Jung-uk Kim, Lv Zheng.

Link: https://github.com/acpica/acpica/commit/3b1026e0
Link: https://github.com/acpica/acpica/commit/00f0dc83
Link: https://github.com/acpica/acpica/commit/47d22a73
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Jung-uk Kim <jkim@FreeBSD.org>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-01 23:17:55 +02:00
Lv Zheng
63c43812ee ACPI / acpidump: Update acpidump manual
This patch updates acpidump manual according to the recent changes.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-01 23:17:55 +02:00
Lv Zheng
4fb80c3769 ACPICA: acpidump: Convert the default behavior to dump from /sys/firmware/acpi/tables
ACPICA commit 04c3bd7e9d6aeb2b3edebe99c90dc271ae4e6353

In order to work without any additional option to dump tables when /dev/mem
doesn't exist, this patch switches the default behavior of acpidump to dump
from /sys/firmware/acpi/tables. Reported by Al Stone, Fixed by Lv Zheng.

Link: https://github.com/acpica/acpica/commit/04c3bd7e
Reported-by: Al Stone <ahs3@redhat.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-01 23:17:55 +02:00
Lv Zheng
428394dfdf ACPICA: acpidump: Allow customized tables to be dumped without accessing /dev/mem
ACPICA commit ab29013cfa2424140446aff196a70b211ab343a9

The /dev/mem can be configured out, in which case, acpidump should still
work with "-c" option as tables can be found in /sys/firmware/acpi/tables.
This patch allows acpidump to work without /dev/mem.
This patch has been tested with "acpidump -c" and "acpidump -c -n FADT".
And it worked as expected. Lv Zheng.

Link: https://github.com/acpica/acpica/commit/ab29013c
Reported-by: Al Stone <ahs3@redhat.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-01 23:17:55 +02:00
Sascha Wildner
cbc823405a ACPICA: Add dragon_fly support to unix file mapping file
ACPICA commit 795b215d6fd062386f0a1c23dff9ffa244683c4f

ACPICA BZ 1130

This patch doesn't affect Linux kernel.

Link: https://bugs.acpica.org/show_bug.cgi?id=1130
Link: https://github.com/acpica/acpica/commit/795b215d
Signed-off-by: Sascha Wildner <swildner@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-01 23:17:53 +02:00
Linus Torvalds
43c9fad942 Power management and ACPI material for v4.2-rc1
- ACPICA update to upstream revision 20150515 including basic
    support for ACPI 6 features: new ACPI tables introduced by
    ACPI 6 (STAO, XENV, WPBT, NFIT, IORT), changes related to the
    other tables (DTRM, FADT, LPIT, MADT), new predefined names
    (_BTH, _CR3, _DSD, _LPI, _MTL, _PRR, _RDI, _RST, _TFP, _TSN),
    fixes and cleanups (Bob Moore, Lv Zheng).
 
  - ACPI device power management core code update to follow ACPI 6
    which reflects the ACPI device power management implementation
    in Windows (Rafael J Wysocki).
 
  - Rework of the backlight interface selection logic to reduce the
    number of kernel command line options and improve the handling
    of DMI quirks that may be involved in that and to make the
    code generally more straightforward (Hans de Goede).
 
  - Fixes for the ACPI Embedded Controller (EC) driver related to
    the handling of EC transactions (Lv Zheng).
 
  - Fix for a regression related to the ACPI resources management
    and resulting from a recent change of ACPI initialization code
    ordering (Rafael J Wysocki).
 
  - Fix for a system initialization regression related to ACPI
    introduced during the 3.14 cycle and caused by running the
    code that switches the platform over to the ACPI mode too
    early in the initialization sequence (Rafael J Wysocki).
 
  - Support for the ACPI _CCA device configuration object related
    to DMA cache coherence (Suravee Suthikulpanit).
 
  - ACPI/APEI fixes and cleanups (Jiri Kosina, Borislav Petkov).
 
  - ACPI battery driver cleanups (Luis Henriques, Mathias Krause).
 
  - ACPI processor driver cleanups (Hanjun Guo).
 
  - Cleanups and documentation update related to the ACPI device
    properties interface based on _DSD (Rafael J Wysocki).
 
  - ACPI device power management fixes (Rafael J Wysocki).
 
  - Assorted cleanups related to ACPI (Dominik Brodowski. Fabian
    Frederick, Lorenzo Pieralisi, Mathias Krause, Rafael J Wysocki).
 
  - Fix for a long-standing issue causing General Protection Faults
    to be generated occasionally on return to user space after resume
    from ACPI-based suspend-to-RAM on 32-bit x86 (Ingo Molnar).
 
  - Fix to make the suspend core code return -EBUSY consistently in
    all cases when system suspend is aborted due to wakeup detection
    (Ruchi Kandoi).
 
  - Support for automated device wakeup IRQ handling allowing drivers
    to make their PM support more starightforward (Tony Lindgren).
 
  - New tracepoints for suspend-to-idle tracing and rework of the
    prepare/complete callbacks tracing in the PM core (Todd E Brandt,
    Rafael J Wysocki).
 
  - Wakeup sources framework enhancements (Jin Qian).
 
  - New macro for noirq system PM callbacks (Grygorii Strashko).
 
  - Assorted cleanups related to system suspend (Rafael J Wysocki).
 
  - cpuidle core cleanups to make the code more efficient (Rafael J
    Wysocki).
 
  - powernv/pseries cpuidle driver update (Shilpasri G Bhat).
 
  - cpufreq core fixes related to CPU online/offline that should
    reduce the overhead of these operations quite a bit, unless the
    CPU in question is physically going away (Viresh Kumar, Saravana
    Kannan).
 
  - Serialization of cpufreq governor callbacks to avoid race
    conditions in some cases (Viresh Kumar).
 
  - intel_pstate driver fixes and cleanups (Doug Smythies, Prarit
    Bhargava, Joe Konno).
 
  - cpufreq driver (arm_big_little, cpufreq-dt, qoriq) updates (Sudeep
    Holla, Felipe Balbi, Tang Yuantian).
 
  - Assorted cleanups in cpufreq drivers and core (Shailendra Verma,
    Fabian Frederick, Wang Long).
 
  - New Device Tree bindings for representing Operating Performance
    Points (Viresh Kumar).
 
  - Updates for the common clock operations support code in the PM
    core (Rajendra Nayak, Geert Uytterhoeven).
 
  - PM domains core code update (Geert Uytterhoeven).
 
  - Intel Knights Landing support for the RAPL (Running Average Power
    Limit) power capping driver (Dasaratharaman Chandramouli).
 
  - Fixes related to the floor frequency setting on Atom SoCs in the
    RAPL power capping driver (Ajay Thomas).
 
  - Runtime PM framework documentation update (Ben Dooks).
 
  - cpupower tool fix (Herton R Krzesinski).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJViJdWAAoJEILEb/54YlRx/9gP/3gHoFevNRycvn0VpKqdufCI
 Mxy2LBBLlfyW2uD3+NvqvA2WWSo0Cs/LgXa04eAVxPdU7k48s8w+54U23wSouzjW
 gfwAmuHxzDR8v0h8X3h6BxNzmkIQHtmDcQlA/cZdHejY/UUw01yxRGNUUZDNbxlm
 WXn2nmlBLmGqXTYq0fpBV+3jicUghJqHHsBCqa3VR2yQioHMJG01F4UZMqYTZunN
 OIvDUghxByKz6alzdCqlLl1Y0exV6vwWUAzBsl1qHqmHu/bWFSZn3ujNNVrjqHhw
 Kl7/8dC2pQkv3Zo3gEVvfQ0onotwWZxGHzPQRdvmxvRnBunQVCi/wynx90yABX/r
 PPb/iBNV0mZskbF0zb0GZT3ZZWGA8Z0p3o5JQv2jV4m62qTzx8w50Y5kbn9N1WT+
 5bre7AVbVAlGonWszcS9iE+6TOboRz9OD1CCwPFXHItFutlBkau+1hHfFoLM0o9n
 LhpGuyszT/EUa1BHkLzuCckFqO2DpbF3N2CKmuTekw0CdgdsvRL2pRByuerk3j7R
 WQhlcvBq5YH6j43AuoEZKp8r1iN8oG/iqlrMYQaYWrW9hJaoQOoU8dGJxp/e7gKN
 r/qeYjETI+tIsjCbtH5WQzzxDI3gPISAYAtfqs7G34EEo+Lwp6kyRUAF4kDot2V3
 ZIyuKMmTu4cdwDETr/O+
 =7jTj
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael Wysocki:
 "The rework of backlight interface selection API from Hans de Goede
  stands out from the number of commits and the number of affected
  places perspective.  The cpufreq core fixes from Viresh Kumar are
  quite significant too as far as the number of commits goes and because
  they should reduce CPU online/offline overhead quite a bit in the
  majority of cases.

  From the new featues point of view, the ACPICA update (to upstream
  revision 20150515) adding support for new ACPI 6 material to ACPICA is
  the one that matters the most as some new significant features will be
  based on it going forward.  Also included is an update of the ACPI
  device power management core to follow ACPI 6 (which in turn reflects
  the Windows' device PM implementation), a PM core extension to support
  wakeup interrupts in a more generic way and support for the ACPI _CCA
  device configuration object.

  The rest is mostly fixes and cleanups all over and some documentation
  updates, including new DT bindings for Operating Performance Points.

  There is one fix for a regression introduced in the 4.1 cycle, but it
  adds quite a number of lines of code, it wasn't really ready before
  Thursday and you were on vacation, so I refrained from pushing it on
  the last minute for 4.1.

  Specifics:

   - ACPICA update to upstream revision 20150515 including basic support
     for ACPI 6 features: new ACPI tables introduced by ACPI 6 (STAO,
     XENV, WPBT, NFIT, IORT), changes related to the other tables (DTRM,
     FADT, LPIT, MADT), new predefined names (_BTH, _CR3, _DSD, _LPI,
     _MTL, _PRR, _RDI, _RST, _TFP, _TSN), fixes and cleanups (Bob Moore,
     Lv Zheng).

   - ACPI device power management core code update to follow ACPI 6
     which reflects the ACPI device power management implementation in
     Windows (Rafael J Wysocki).

   - rework of the backlight interface selection logic to reduce the
     number of kernel command line options and improve the handling of
     DMI quirks that may be involved in that and to make the code
     generally more straightforward (Hans de Goede).

   - fixes for the ACPI Embedded Controller (EC) driver related to the
     handling of EC transactions (Lv Zheng).

   - fix for a regression related to the ACPI resources management and
     resulting from a recent change of ACPI initialization code ordering
     (Rafael J Wysocki).

   - fix for a system initialization regression related to ACPI
     introduced during the 3.14 cycle and caused by running the code
     that switches the platform over to the ACPI mode too early in the
     initialization sequence (Rafael J Wysocki).

   - support for the ACPI _CCA device configuration object related to
     DMA cache coherence (Suravee Suthikulpanit).

   - ACPI/APEI fixes and cleanups (Jiri Kosina, Borislav Petkov).

   - ACPI battery driver cleanups (Luis Henriques, Mathias Krause).

   - ACPI processor driver cleanups (Hanjun Guo).

   - cleanups and documentation update related to the ACPI device
     properties interface based on _DSD (Rafael J Wysocki).

   - ACPI device power management fixes (Rafael J Wysocki).

   - assorted cleanups related to ACPI (Dominik Brodowski, Fabian
     Frederick, Lorenzo Pieralisi, Mathias Krause, Rafael J Wysocki).

   - fix for a long-standing issue causing General Protection Faults to
     be generated occasionally on return to user space after resume from
     ACPI-based suspend-to-RAM on 32-bit x86 (Ingo Molnar).

   - fix to make the suspend core code return -EBUSY consistently in all
     cases when system suspend is aborted due to wakeup detection (Ruchi
     Kandoi).

   - support for automated device wakeup IRQ handling allowing drivers
     to make their PM support more starightforward (Tony Lindgren).

   - new tracepoints for suspend-to-idle tracing and rework of the
     prepare/complete callbacks tracing in the PM core (Todd E Brandt,
     Rafael J Wysocki).

   - wakeup sources framework enhancements (Jin Qian).

   - new macro for noirq system PM callbacks (Grygorii Strashko).

   - assorted cleanups related to system suspend (Rafael J Wysocki).

   - cpuidle core cleanups to make the code more efficient (Rafael J
     Wysocki).

   - powernv/pseries cpuidle driver update (Shilpasri G Bhat).

   - cpufreq core fixes related to CPU online/offline that should reduce
     the overhead of these operations quite a bit, unless the CPU in
     question is physically going away (Viresh Kumar, Saravana Kannan).

   - serialization of cpufreq governor callbacks to avoid race
     conditions in some cases (Viresh Kumar).

   - intel_pstate driver fixes and cleanups (Doug Smythies, Prarit
     Bhargava, Joe Konno).

   - cpufreq driver (arm_big_little, cpufreq-dt, qoriq) updates (Sudeep
     Holla, Felipe Balbi, Tang Yuantian).

   - assorted cleanups in cpufreq drivers and core (Shailendra Verma,
     Fabian Frederick, Wang Long).

   - new Device Tree bindings for representing Operating Performance
     Points (Viresh Kumar).

   - updates for the common clock operations support code in the PM core
     (Rajendra Nayak, Geert Uytterhoeven).

   - PM domains core code update (Geert Uytterhoeven).

   - Intel Knights Landing support for the RAPL (Running Average Power
     Limit) power capping driver (Dasaratharaman Chandramouli).

   - fixes related to the floor frequency setting on Atom SoCs in the
     RAPL power capping driver (Ajay Thomas).

   - runtime PM framework documentation update (Ben Dooks).

   - cpupower tool fix (Herton R Krzesinski)"

* tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (194 commits)
  cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state
  x86: Load __USER_DS into DS/ES after resume
  PM / OPP: Add binding for 'opp-suspend'
  PM / OPP: Allow multiple OPP tables to be passed via DT
  PM / OPP: Add new bindings to address shortcomings of existing bindings
  ACPI: Constify ACPI device IDs in documentation
  ACPI / enumeration: Document the rules regarding the PRP0001 device ID
  ACPI / video: Make acpi_video_unregister_backlight() private
  acpi-video-detect: Remove old API
  toshiba-acpi: Port to new backlight interface selection API
  thinkpad-acpi: Port to new backlight interface selection API
  sony-laptop: Port to new backlight interface selection API
  samsung-laptop: Port to new backlight interface selection API
  msi-wmi: Port to new backlight interface selection API
  msi-laptop: Port to new backlight interface selection API
  intel-oaktrail: Port to new backlight interface selection API
  ideapad-laptop: Port to new backlight interface selection API
  fujitsu-laptop: Port to new backlight interface selection API
  eeepc-laptop: Port to new backlight interface selection API
  dell-wmi: Port to new backlight interface selection API
  ...
2015-06-23 14:18:07 -07:00
Rafael J. Wysocki
a8269d36a8 Merge branches 'pnp' and 'pm-tools'
* pnp:
  PNP / ACPI: use unsigned int in pnpacpi_encode_resources()
  PNP / ACPI: use u8 instead of int in acpi_resource_extended_irq context

* pm-tools:
  cpupower: mperf monitor: fix output in MAX_FREQ_SYSFS mode
2015-06-19 01:18:43 +02:00
Len Brown
6fb3143b56 tools/power turbostat: dump CONFIG_TDP
Config TDP is a feature that allows parts to be configured
for different thermal limits after they have left the factory.

This can have an effect on the operation of the part,
particularly in determiniing...

Max Non-turbo Ratio
Turbo Activation Ratio

Signed-off-by: Len Brown <len.brown@intel.com>
2015-06-17 16:23:45 -04:00
Len Brown
bfae205226 tools/power turbostat: cpu0 is no longer hard-coded, so update output
The --debug option reads a number of per-package MSRs.
Previously we explicitly read them on cpu0, but recently
turbostat changed to read them on the current "base_cpu".

Update the print-out to reflect base_cpu, rather than
the hard-coded cpu0.

Signed-off-by: Len Brown <len.brown@intel.com>
2015-06-17 12:27:21 -04:00
Borislav Petkov
b72e7464e4 x86/uapi: Do not export <asm/msr-index.h> as part of the user API headers
This header containing all MSRs and respective bit definitions
got exported to userspace in conjunction with the big UAPI
shuffle.

But, it doesn't belong in the UAPI headers because userspace can
do its own MSR defines and exporting them from the kernel blocks
us from doing cleanups/renames in that header. Which is
ridiculous - it is not kernel's job to export such a header and
keep MSRs list and their names stable.

Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1433436928-31903-19-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-07 15:36:04 +02:00
Len Brown
75fd7ffa7f tools/power turbostat: update turbostat(8)
Remove reference to the original Nehalem Turbo white paper,
since it has moved, and these mechanisms have now long since
been documented in the Software Developer's Manual.

Reported-by: Jeremie Lagraviere <jeremie@simula.no>
Signed-off-by: Len Brown <len.brown@intel.com>
2015-06-03 07:37:24 -04:00
Herton R. Krzesinski
47b98c74fa cpupower: mperf monitor: fix output in MAX_FREQ_SYSFS mode
There is clearly wrong output when mperf monitor runs in MAX_FREQ_SYSFS mode:
average frequency shows in kHz unit (despite the intended output to be in MHz),
and percentages for C state information are all wrong (including high/negative
values shown).

The problem is that the max_frequency read on initialization isn't used where it
should have been used on mperf_get_count_percent (to estimate the number of
ticks in the given time period), and the value we read from sysfs is in kHz, so
we must divide it to get the MHz value to use in current calculations.

While at it, also I fixed another small issues in the debug output of
max_frequency value in mperf_get_count_freq.

Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-30 02:21:31 +02:00
Len Brown
a68c7c3ff0 tools/power turbostat: update version number to 4.7
Signed-off-by: Len Brown <len.brown@intel.com>
2015-05-27 18:04:01 -04:00
Prarit Bhargava
7ce7d5de6d tools/power turbostat: allow running without cpu0
Linux-3.7 added CONFIG_BOOTPARAM_HOTPLUG_CPU0,
allowing systems to offline cpu0.

But when cpu0 is offline, turbostat will not run:

 # turbostat ls
turbostat: no /dev/cpu/0/msr

This patch replaces the hard-coded use of cpu0 in turbostat
with the current cpu, allowing it to run without a cpu0.

Fewer cross-calls may also be needed due to use of current cpu,
though this hard-coding was used only for the --debug preamble.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2015-05-27 18:04:01 -04:00
Len Brown
e9be7dd628 tools/power turbostat: correctly decode of ENERGY_PERFORMANCE_BIAS
When EPB is 0xF, turbosat was incorrectly describing it as "custom"
instead of calling it "powersave":

< cpu0: MSR_IA32_ENERGY_PERF_BIAS: 0x0000000f (custom)
> cpu0: MSR_IA32_ENERGY_PERF_BIAS: 0x0000000f (powersave)

Signed-off-by: Len Brown <len.brown@intel.com>
2015-05-27 18:04:00 -04:00
Dasaratharaman Chandramouli
fb5d432722 tools/power turbostat: enable turbostat to support Knights Landing (KNL)
Changes mainly to account for minor differences in Knights Landing(KNL):
1. KNL supports C1 and C6 core states.
2. KNL supports PC2, PC3 and PC6 package states.
3. KNL has a different encoding of the TURBO_RATIO_LIMIT MSR

Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2015-05-27 18:03:57 -04:00
Dasaratharaman Chandramouli
e275b3885d tools/power turbostat: correctly display more than 2 threads/core
Without this update, turbostat displays only 2 threads per core.
Some processors, such as Xeon Phi, have more.

Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2015-05-27 17:26:42 -04:00
Linus Torvalds
c8b3fd0ce3 More power management and ACPI updates for v4.1-rc1
- Fix a build warning in the intel_pstate driver showing up in non-SMP
    builds (Borislav Petkov).
 
  - Change one of the intel_pstate's P-state selection parameters for
    Baytrail and Cherrytrail CPUs to significantly improve performance
    at the cost of a small increase in energy consumption (Kristen
    Carlson Accardi).
 
  - Fix a NULL pointer dereference in the ACPI EC driver due to an unsafe
    list walk in the query handler removal routine (Chris Bainbridge).
 
  - Get rid of a false-positive lockdep warning in the ACPI container
    hot-remove code (Rafael J Wysocki).
 
  - Prevent the ACPI device enumeration code from creating device
    objects of a wrong type in some cases (Rafael J Wysocki).
 
  - Add Skylake processors support to the Intel RAPL power capping
    driver (Brian Bian).
 
  - Drop the stale MAINTAINERS entry for the ACPI dock driver that is
    regarded as part of the ACPI core and maintained along with it now
    (Chao Yu).
 
  - Fix cpupower tool breakage caused by a library API change in libpci
    3.3.0 (Lucas Stach).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJVOoMNAAoJEILEb/54YlRxx+QP/A/gaX9GgB6rv627Khlaw2AK
 PpE1SrJoU9jAEwPqXtRnYc/6nducDzO5XaHOdWaV02YCpKLL5vIyia6wcy7cf4kr
 6vJUnBz0OiHjp4e4sYrvIGt7RrLnlodayKAzNgtjDjF2JE3gzOOldD0klcfisiUP
 Uc7Y3bpFndS8fwpcJO0tGm73aA9kNC5N8sYxgtuv/OAeMmJgi0fIi2V227XIurJU
 48nMJ1v7M3OChmhdfxEtUSR9TM8J0Ck3yJwPYORNFItRCGqHJb3WY6lo1kbNcv1g
 SLwbw+nCaq+E4k2PtDAsg68Ni0uGGnytcBTzhtPeUOdPRulp4CHCnZEyMUBwFVV8
 gZlgL2S3CxcBlZ52hVB9tAhAyRcxmaWrp1v/hNsTh1xX9v9JFUFdpjYvk1RlHKwD
 aT30G1mV8icU9lrYzhNOnh9gMrZVv6wy4sp4Uk1NLa17WXu+p0LMrCX8HJEb3PT3
 rYZ8jbzo422lTksopiLTLhY4ipgX+kysa7NhTtw/J5Hb9xctho0uTsIhP6sSkh2e
 eHO8WthEpF36228n6qiGGTBMcs4xPD8goxXCeBmgsBeVAQDaVR1IcArVTS+HAaJX
 KOhemws+ThpEpjqB8jbpa42OEmY1Um3UUufHwnJIX54vGkSlXBxXE9r3hCwK7Mgu
 hQhnM9hargHcy9Z8vd91
 =0bKD
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-4.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more power management and ACPI updates from Rafael Wysocki:
 "These are fixes mostly (intel_pstate, ACPI core, ACPI EC driver,
  cpupower tool), a new CPU ID for the Intel RAPL driver and one
  intel_pstate driver improvement that didn't make it to my previous
  pull requests due to timing.

  Specifics:

   - Fix a build warning in the intel_pstate driver showing up in
     non-SMP builds (Borislav Petkov)

   - Change one of the intel_pstate's P-state selection parameters for
     Baytrail and Cherrytrail CPUs to significantly improve performance
     at the cost of a small increase in energy consumption (Kristen
     Carlson Accardi)

   - Fix a NULL pointer dereference in the ACPI EC driver due to an
     unsafe list walk in the query handler removal routine (Chris
     Bainbridge)

   - Get rid of a false-positive lockdep warning in the ACPI container
     hot-remove code (Rafael J Wysocki)

   - Prevent the ACPI device enumeration code from creating device
     objects of a wrong type in some cases (Rafael J Wysocki)

   - Add Skylake processors support to the Intel RAPL power capping
     driver (Brian Bian)

   - Drop the stale MAINTAINERS entry for the ACPI dock driver that is
     regarded as part of the ACPI core and maintained along with it now
     (Chao Yu)

   - Fix cpupower tool breakage caused by a library API change in libpci
     3.3.0 (Lucas Stach)"

* tag 'pm+acpi-4.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / scan: Add a scan handler for PRP0001
  ACPI / scan: Annotate physical_node_lock in acpi_scan_is_offline()
  ACPI / EC: fix NULL pointer dereference in acpi_ec_remove_query_handler()
  MAINTAINERS: remove maintainship entry of docking station driver
  powercap / RAPL: Add support for Intel Skylake processors
  cpufreq: intel_pstate: Fix an annoying !CONFIG_SMP warning
  intel_pstate: Change the setpoint for Atom params
  cpupower: fix breakage from libpci API change
2015-04-26 13:56:35 -07:00
Linus Torvalds
09d51602cf Merge branch 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat update from Len Brown:
 "Updates to the turbostat utility.

  Just one kernel dependency in this batch -- added a #define to
  msr-index.h"

* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: correct dumped pkg-cstate-limit value
  tools/power turbostat: calculate TSC frequency from CPUID(0x15) on SKL
  tools/power turbostat: correct DRAM RAPL units on recent Xeon processors
  tools/power turbostat: Initial Skylake support
  tools/power turbostat: Use $(CURDIR) instead of $(PWD) and add support for O= option in Makefile
  tools/power turbostat: modprobe msr, if needed
  tools/power turbostat: dump MSR_TURBO_RATIO_LIMIT2
  tools/power turbostat: use new MSR_TURBO_RATIO_LIMIT names
  x86 msr-index: define MSR_TURBO_RATIO_LIMIT,1,2
  tools/power turbostat: label base frequency
  tools/power turbostat: update PERF_LIMIT_REASONS decoding
  tools/power turbostat: simplify default output
2015-04-19 14:31:41 -07:00
Rafael J. Wysocki
2363ccb505 Merge branches 'pm-cpufreq', 'powercap' and 'pm-tools'
* pm-cpufreq:
  cpufreq: intel_pstate: Fix an annoying !CONFIG_SMP warning
  intel_pstate: Change the setpoint for Atom params

* powercap:
  powercap / RAPL: Add support for Intel Skylake processors

* pm-tools:
  cpupower: fix breakage from libpci API change
2015-04-19 21:19:27 +02:00
Len Brown
e9257f5fa4 tools/power turbostat: correct dumped pkg-cstate-limit value
HSW expanded MSR_PKG_CST_CONFIG_CONTROL.Package-C-State-Limit,
from bits[2:0] used by previous implementations, to [3:0].
The value 1000b is unlimited, and is used by BDW and SKL too.

Signed-off-by: Len Brown <len.brown@intel.com>
2015-04-18 14:20:52 -04:00
Len Brown
8a5bdf41d2 tools/power turbostat: calculate TSC frequency from CPUID(0x15) on SKL
turbostat --debug
...
CPUID(0x15): eax_crystal: 2 ebx_tsc: 100 ecx_crystal_hz: 0
TSC: 1200 MHz (24000000 Hz * 100 / 2 / 1000000)

Signed-off-by: Len Brown <len.brown@intel.com>
2015-04-18 14:20:52 -04:00
Andrey Semin
40ee8e3b9d tools/power turbostat: correct DRAM RAPL units on recent Xeon processors
While not yet documented in the Software Developer's Manual,
the data-sheet for modern Xeon states that DRAM RAPL ENERGY units
are fixed at 15.3 uJ, rather than being discovered via MSR.

Before this patch, DRAM energy on these products is over-stated by turbostat
because the RAPL units are 4x larger.

ref: "Xeon E5-2600 v3/E5-1600 v3 Datasheet Volume 2"
http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/xeon-e5-v3-datasheet-vol-2.pdf

Signed-off-by: Andrey Semin <andrey.semin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2015-04-18 14:20:52 -04:00