Fix following warning:
WARNING: arch/x86/kernel/built-in.o(__ksymtab+0x2b0): Section mismatch: reference to .cpuinit.text:arch_register_cpu in '__ksymtab_arch_register_cpu'
Annotating exported symbols are wrong.
Previously the warning were hidden by avoiding the export
in the non HOTPLUG_CPU case but the improved checks in
modpost caught it anyway.
Fix it by removing the __cpuinit annotation and rearrange the
code a bit to save one ifdef/endif pair.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Fix following warnings:
WARNING: arch/x86/kernel/built-in.o(.text+0x139e1): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk'
WARNING: arch/x86/kernel/built-in.o(.text+0x139f5): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk'
WARNING: arch/x86/kernel/built-in.o(.text+0x13a0c): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk'
WARNING: arch/x86/kernel/built-in.o(.text+0x13a12): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk'
WARNING: arch/x86/kernel/built-in.o(.text+0x13a1a): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk'
WARNING: arch/x86/kernel/built-in.o(.text+0x13a36): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk'
WARNING: arch/x86/kernel/built-in.o(.text+0x13a42): Section mismatch: reference to .init.data:
Warning was caused by access to the __initdata annotated variable
from the non-annotated static function check_dev_quirk().
check_dev_quirk() were only used from a function annotated
__init so add __init annotation to check_dev_quirk() to fix it.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Fix following warning:
WARNING: arch/x86/kernel/built-in.o(.text+0x10ea0): Section mismatch: reference to .cpuinit.data:num_processors in 'acpi_unmap_lsapic'
The exported function acpi_unmap_lsapic() references
the variable num_processors that is annotated __cpuinitdata.
Remove the annotation of num_processors as we never know
when an exported function are called.
And drop the needless initialsation to 0.
Warning was seen on 64 bit but similar pattern were seen
in 32 bit - so fix it up there too.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Fix the following warning:
WARNING: arch/x86/kernel/built-in.o(.text+0x3): Section mismatch: reference to .cpuinit.data:force_mwait in 'mwait_usable'
[Seen on 64 bit only but similar pattern exist on 32 bit so fix it there too]
mwait_usable() were only used by a function annotated __cpuinit
so annotate mwait_usable() with __cpuinit to fix the warning.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Fix following warning:
WARNING: arch/x86/kernel/cpu/mcheck/built-in.o(.text+0x1584): Section mismatch: reference to .cpuinit.text:threshold_create_device in 'threshold_cpu_callback'
threshold_cpu_callback() is only used by threshold_cpu_notifier.
threshold_cpu_notifier is only used for cpu hot plug as it is registered
using register_hotcpu_notifier().
Mark them both __cpuinit to fix the warning.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Fix following warning:
WARNING: arch/x86/kernel/cpu/mcheck/built-in.o(.text+0x752): Section mismatch: reference to .cpuinit.text:mce_create_device in 'mce_cpu_callback'
mce_cpu_callback() is only used by mce_cpu_notofier.
The notifier is only used for hotplugable cpu's as it is
registered using register_hotcpu_notifier(),
Annotate them both __cpuinit to fix the warning.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The RDC R-321x SoC needs a reboot fixup which
uses its internal hardware watchdog set to
reset the CPU on next tick.
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The existing Geode GPIO API only allows for updating one GPIO at once. There
are instances where users want to update multiple GPIOs at once. With the
current API, they are given two choices; either ignore the GPIO API:
outl(0xc000, gpio_base + GPIO_OUTPUT_VAL);
outl(0xc000, gpio_base + GPIO_OUTPUT_ENABLE);
Alternatively, call each GPIO update separately:
geode_gpio_set(14, GPIO_OUTPUT_VAL);
geode_gpio_set(15, GPIO_OUTPUT_VAL);
geode_gpio_set(14, GPIO_OUTPUT_ENABLE);
geode_gpio_set(15, GPIO_OUTPUT_ENABLE);
Neither are desirable. This patch changes the GPIO API to allow for setting
of multiple GPIOs at once; rather than being passed an integer, we pass
a bitmask and provide a translation function. The above code would now
look like this:
geode_gpio_set(geode_gpio(14)|geode_gpio(15), GPIO_OUTPUT_VAL);
geode_gpio_set(geode_gpio(14)|geode_gpio(15), GPIO_OUTPUT_ENABLE);
Since there are no upstream users of the GPIO API yet (afaik), best to
change this now. This also adds a bit of sanity checking; it is no
longer possible to use a GPIO above 28.
Note the semantics of geode_gpio_isset() have changed:
geode_gpio_isset(geode_gpio(3)|geode_gpio(4), ...)
will only return true iff both GPIOs are set.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix cpu MHz reporting for AMD family 0x11 when powernow-k8 is
disabled.
Just adhere to the CONSTANT_TSC feature bit for AMD CPUs when deciding
whether cpu_khz needs calibration. The additional check for CPU family
is not needed and prevents calibration for future CPUs.
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
improve the MTTR trimming messages and also trigger a WARN_ON()
so that kerneloops.org can pick it up and categorize it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The new "mfgptfix" boot command line option may be usd to fix MFGPT
timers on AMD Geode platforms when the BIOS has incorrectly applied
a workaround. TinyBIOS version 0.98 is known to be affected, 0.99
fixes the problem by letting the user disable the workaround.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
No one uses struct cpu_model_info on x86_64 now.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use KSYM_NAME_LEN instead of numeric value
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
when MTRRs are not covering the whole e820 table, we need to trim the
RAM and need to update e820.
reuse some code on 64-bit as well.
here need to add early_get_cap and use it in early_cpu_detect, and move
mtrr_bp_init early.
The code successfully trimmed the memory map on Justin's system:
from:
[ 0.000000] BIOS-e820: 0000000100000000 - 000000022c000000 (usable)
to:
[ 0.000000] modified: 0000000100000000 - 0000000228000000 (usable)
[ 0.000000] modified: 0000000228000000 - 000000022c000000 (reserved)
According to Justin it makes quite a difference:
| When I boot the box without any trimming it acts like a 286 or 386,
| takes about 10 minutes to boot (using raptor disks).
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Tested-by: Justin Piszcz <jpiszcz@lucidpixels.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
the previous patch in the old RTC driver. It also removes the direct
rtc_interrupt() call from arch/x86/kernel/hpetc.c so that there's finally no
(code) dependency to CONFIG_RTC in arch/x86/kernel/hpet.c.
Because of this, it's possible to compile the drivers/char/rtc.ko driver as
module and still use the HPET emulation functionality. This is also expressed
in Kconfig.
Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Andi Kleen <ak@suse.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Robert Picco <Robert.Picco@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
enabled, then interrupts don't work for the rtc-cmos driver which results in
RTC_AIE*, RTC_PIE* and RTC_ALM being unusable. This affects hwclock from
util-linux-ng at least on i386 since that uses RTC_PIE_ON. (For x86-64, a
polling method is used for unknown reasons.)
This patch series now
1. export the functions from arch/x86/kernel/hpet.c that the old char/rtc
driver uses to work around that problem,
2. makes it possible to compile the old rtc driver as module, while still
having CONFIG_HPET_EMULATE_RTC enabled and
3. makes use of the exported functions in (1) in the new rtc-cmos driver.
This patch:
This patch makes the RTC emulation functions in arch/x86/kernel/hpet.c usable
for kernel modules. It
- exports the functions (EXPORT_SYMBOL_GPL()),
- adds an interface to register the interrupt callback function
instead of using only a fixed callback function and
- replaces the rtc_get_rtc_time() function which depends on
CONFIG_RTC with a call to get_rtc_time() which is defined in
include/asm-generic/rtc.h.
The only dependency to CONFIG_RTC is the call to rtc_interrupt() which is
removed by the next patch. After this, there's no (code) dependency of
this functions to CONFIG_RTC=y any more.
Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Andi Kleen <ak@suse.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Robert Picco <Robert.Picco@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
I am preparing to convert the boot time page table to the kernels
native format. To achieve that I need to enable PAE. Enabling PSE
and the no execute bit would not hurt. So this patch modifies
the boot cpu path to execute all of the kernels enable code
if and only if we have the proper bits set in mmu_cr4_features.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Mika Penttilä <mika.penttila@kolumbus.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Currently in head_32.S there are two ways we test to see if we
are the boot cpu. By looking at %ebx and by looking at the
static variable ready. When changing things around I have
found that it gets tricky to preserve %ebx. So this
patch just switches head.S over to the more reliable
test of always using ready.
Hopefully later we can kill these tests entirely.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Mika Penttilä <mika.penttila@kolumbus.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Small fomatting fixes to 64-bit as well, trailing whitespace
and extra semicolon, also move the ifdefs for CONFIG_KALLSYMS
into the function itself.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We are driving a motherboard port so use a 2uS explicit delay at this
point.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
export __supported_pte_mask variable as GPL symbol.
lguest is a user of it.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Exporrt check_tsc_unstable function as GPL symbol. lguest is
a user of it.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
An older binutils bug caused us to not fix up alternatives.
This problem involved mutex.c but we dont do lockdep section tricks
there anymore, so this workaround is moot. Keep the printk nevertheless,
just in case ... We can remove that later on.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
add warning to check_tsc_warp() - if get_cycles() does not progress.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
100 million max # of loops is a bit too much - reduce it to 10 million.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Change static bios_cpu_apicid array to a per_cpu data variable.
This includes using a static array used during initialization
similar to the way x86_cpu_to_apicid[] is handled.
There is one early use of bios_cpu_apicid in apic_is_clustered_box().
The other reference in cpu_present_to_apicid() is called after
smp_set_apicids() has setup the percpu version of bios_cpu_apicid.
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Change the following static arrays sized by NR_CPUS to
per_cpu data variables:
char cpu_to_node_map[NR_CPUS];
fixup:
- Split cpu_to_node function into "early" and "late" versions
so that x86_cpu_to_node_map_early_ptr is not EXPORT'ed and
the cpu_to_node inline function is more streamlined.
- This also involves setting up the percpu maps as early as possible.
- Fix X86_32 NUMA build errors that previous version of this
patch caused.
V2->V3:
- add early_cpu_to_node function to keep cpu_to_node efficient
- move and rename smp_set_apicids() to setup_percpu_maps()
- call setup_percpu_maps() as early as possible
V1->V2:
- Removed extraneous casts
- Fix !NUMA builds with '#ifdef CONFIG_NUMA"
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add a generic option to clear any cpuid bit. I added it because it was
very easy to add with the new generic cpuid disable bitmap and perhaps
it will be useful in the future.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To disable CLFLUSH usage, especially in change_page_attr().
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Modern 32bit userland doesn't even boot when the TSC is disabled
because ld.so tends to contain RDTSCs. So make notsc only effective for the
kernel, similar to 64bit.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This convers nofxsr, mem=nopentium and nosep to use the new
generic cpuid disable bitmap instead of using own variables.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
There are already various options to disable specific cpuid bits
on the command line. They all use their own variable. Add a generic
mask to make this easier in the future.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This finally makes paravirt-ops able to compile and boot under x86_64.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
paravirt_pagetable_setup_{start,done}() are not used (yet) under x86_64,
and native_pagetable_setup_{start,done}() don't exist on x86_64. So they
don't need to be set.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds the __parainstructions section to vmlinux.lds.S.
It's needed for the patching system.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds the constant PARAVIRT needs in asm_offsets_64.c
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch fills in the read and write cr8 fields with their
native version.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
x86_64 lacks a native_init_IRQ() function, so we turn the arch's
init_IRQ() function into a native construct
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We use a __stringify construction at paravirt_patch_64.c.
It's better practice to include the stringify header directly
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
currently when gart iommu is enabled by BIOS or previous we got
"
Checking aperture...
CPU 0: aperture @4000000 size 64MB
CPU 1: aperture @4000000 size 64MB
"
we should use use Node instead.
we will get
"
Checking aperture...
Node 0: aperture @4000000 size 64MB
Node 1: aperture @4000000 size 64MB
"
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Move the select_idle_routine() call to after the detect_ht() call at
identify_cpu() on 64-bit.
This change is for printing the polling idle and HT enabled warning
message properly.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The warning message at idle_setup() is never shown because
smp_num_sibling hasn't been updated at this point yet.
Move this polling idle and HT enabled warning to select_idle_routine().
I also implement this warning on 64-bit kernel.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
do not add the pcspkr platform device if pcspkr support is disabled.
Signed-off-by: Michael Opdenacker <michael@free-electrons.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Andi's patch
"
x86: move X86_FEATURE_CONSTANT_TSC into early cpu feature detection
Need this in the next patch in time_init and that happens early.
This includes a minor fix on i386 where early_intel_workarounds()
[which is now called early_init_intel] really executes early as
the comments say.
"
calling early_init_amd in early_identify_cpu and identify_cpu two times.
this patch remove the one in identify_cpu
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
On some machines, buggy BIOSes don't properly setup WB MTRRs to cover all
available RAM, meaning the last few megs (or even gigs) of memory will be
marked uncached. Since Linux tends to allocate from high memory addresses
first, this causes the machine to be unusably slow as soon as the kernel
starts really using memory (i.e. right around init time).
This patch works around the problem by scanning the MTRRs at boot and
figuring out whether the current end_pfn value (setup by early e820 code)
goes beyond the highest WB MTRR range, and if so, trimming it to match. A
fairly obnoxious KERN_WARNING is printed too, letting the user know that
not all of their memory is available due to a likely BIOS bug.
Something similar could be done on i386 if needed, but the boot ordering
would be slightly different, since the MTRR code on i386 depends on the
boot_cpu_data structure being setup.
This patch fixes a bug in the last patch that caused the code to run on
non-Intel machines (AMD machines apparently don't need it and it's untested
on other non-Intel machines, so best keep it off).
Further enhancements and fixes from:
Yinghai Lu <Yinghai.Lu@Sun.COM>
Andi Kleen <ak@suse.de>
Signed-off-by: Jesse Barnes <jesse.barnes@intel.com>
Tested-by: Justin Piszcz <jpiszcz@lucidpixels.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
They now look like:
hal-resmgr[13791]: segfault at 3c rip 2b9c8caec182 rsp 7fff1e825d30 error 4 in libacl.so.1.1.0[2b9c8caea000+6000]
This makes it easier to pinpoint bugs to specific libraries.
And printing the offset into a mapping also always allows to find the
correct fault point in a library even with randomized mappings. Previously
there was no way to actually find the correct code address inside
the randomized mapping.
Relies on earlier patch to shorten the printk formats.
They are often now longer than 80 characters, but I think that's worth it.
[includes fix from Eric Dumazet to check d_path error value]
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When the kernel panics early for some unrelated reason
there would be eventually an early exception inside panic because
clear_local_APIC tried to disable the not yet mapped APIC.
Check for that explicitely.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
On VMs implemented using JITs that cache translated code changing the lock
prefixes is a quite costly operation that forces the JIT to throw away and
retranslate a lot of code.
Previously a SMP kernel would rewrite the locks once for each CPU which
is quite unnecessary. This patch changes the code to never switch at boot in
the normal case (SMP kernel booting with >1 CPU) or only once for SMP kernel
on UP.
This makes a significant difference in boot up performance on AMD SimNow!
Also I expect it to be a little faster on native systems too because a smp
switch does a lot of text_poke()s which each synchronize the pipeline.
v1->v2: Rename max_cpus
v1->v2: Fix off by one in UP check (Thomas Gleixner)
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
On x86-64 there are several memory allocations before bootmem. To avoid
them stomping on each other they used to be all hard coded in bad_area().
Replace this with an array that is filled as needed.
This cleans up the code considerably and allows to expand its use.
Cc: peterz@infradead.org
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Previously there was a AMD specific quirk to handle the case of
AMD Fam10h MWAIT not supporting any C states. But it turns out
that CPUID already has ways to detectly detect that without
using special quirks.
The new code simply checks if MWAIT supports at least C1 and doesn't
use it if it doesn't. No more vendor specific code.
Note this is does not simply clear MWAIT because MWAIT can be still
useful even without C states.
Credit goes to Ben Serebrin for pointing out the (nearly) obvious.
Cc: "Andreas Herrmann" <andreas.herrmann3@amd.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Previously it was only run for Intel CPUs, but AMD Fam10h implements MWAIT too.
This matches 64bit behaviour.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Based on patch from Jan Beulich <jbeulich@novell.com>.
Don't rely on kmalloc(PAGE_SIZE) returning PAGE_SIZE aligned memory
(Xen requires GDT *and* LDT to be page-aligned). Using the page
allocator interface also removes the (albeit small) slab allocator
overhead. The same change being done for 64-bits for consistency.
Further, the Xen hypercall interface expects the LDT address to be
virtual, not machine.
[ Adjusted to unified ldt.c - Jeremy ]
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Remove the dead .text.lock. Move _etext and __{start,stop}___ex_table
into their sections.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Rather than remove and/or mangle inb_p/outb_p we want to remove the use
of them from inappropriate places. For the PIC/PIT this may eventually
depend on 32/64bitism or similar so start by adding inb/outb_pit and
inb/outb_pic so that we can make them use any scheme we settle on without
disturbing the existing, correct (for ISA), port 0x80 usage. (eg we can
make inb_pit use udelay without messing up inb_p).
Floppy already does this for the fdc. That really only leaves the CMOS as
a core logic item to tackle, and bits of parallel port handling in the
chipset layers.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Highlight peculiar cases in singles-step kprobe handling.
In reenter_kprobe(), a breakpoint in KPROBE_HIT_SS case can only occur
when single-stepping a breakpoint on which a probe was installed. Since
such probes are single-stepped inline, identifying these cases is
unambiguous. All other cases leading up to KPROBE_HIT_SS are possible
bugs. Identify and WARN_ON such cases.
Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
an otherwise idle system takes about 3 ticks per network
interface in unregister_netdev() due to multiple calls to synchronize_rcu(),
which adds up to quite a few seconds for tearing down thousands of
interfaces. By flushing pending rcu callbacks in the idle loop, the system
makes progress hundreds of times faster. If this is indeed a sane thing to,
it probably needs to be done for other architectures than x86. And yes, the
network stack shouldn't call synchronize_rcu() quite so much, but fixing that
is a little more involved.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
is_prefetch was the last user of get_segment_eip and only on
X86_32. This function returned the faulting instruction's
address and set the upper segment limit.
Instead, use the convert_ip_to_linear helper and rely on
probe_kernel_address to do the segment checks which was
already done everywhere the segment limit was being checked
on X86_32.
Remove get_segment_eip as well.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Rename convert_rip_to_linear to convert_ip_to_linear for shared
X86_32|64 use.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Where x86_32 passed zero in the high 32 bits, use wrmsrl which
will zero extend for us. This allows ifdefs for 32/64 bit to
be eliminated.
Eliminate ifdef in step.c. Similar cleanup was done when unifying
kprobes_32|64.c and wrmsr() was chosen there over wrmsrl(). This
patch changes these to wrmsrl.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Change static bios_cpu_apicid array to a per_cpu data variable.
This includes using a static array used during initialization
similar to the way x86_cpu_to_apicid[] is handled.
There is one early use of bios_cpu_apicid in apic_is_clustered_box().
The other reference in cpu_present_to_apicid() is called after
smp_set_apicids() has setup the percpu version of bios_cpu_apicid.
[ mingo@elte.hu: build fix ]
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Change the following static arrays sized by NR_CPUS to
per_cpu data variables:
acpi_cpufreq_data *drv_data[NR_CPUS]
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Change the following static arrays sized by NR_CPUS to
per_cpu data variables:
char cpu_to_node_map[NR_CPUS];
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Clean up references to x86_cpu_to_apicid. Removes extraneous
comments and standardizes on "x86_*_early_ptr" for the early
kernel init references.
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Change the following static arrays sized by NR_CPUS to
per_cpu data variables:
i386_cpu cpu_devices[NR_CPUS];
(And change the struct name to x86_cpu.)
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Change the following static arrays sized by NR_CPUS to
per_cpu data variables:
task_struct *idle_thread_array[NR_CPUS];
This is only done if CONFIG_HOTPLUG_CPU is defined
as otherwise, the array is removed after initialization
anyways.
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Change the following static arrays sized by NR_CPUS to
per_cpu data variables:
powernow_k8_data *powernow_data[NR_CPUS];
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Change the size of APICIDs from u8 to u16. This partially
supports the new x2apic mode that will be present on future
processor chips. (Chips actually support 32-bit APICIDs, but that
change is more intrusive. Supporting 16-bit is sufficient for now).
Signed-off-by: Jack Steiner <steiner@sgi.com>
I've included just the partial change from u8 to u16 apicids. The
remaining x2apic changes will be in a separate patch.
In addition, the fake_node_to_pxm_map[] and fake_apicid_to_node[]
tables have been moved from local data to the __initdata section
reducing stack pressure when MAX_NUMNODES and MAX_LOCAL_APIC are
increased in size.
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Refactor ioport unification to pull out common code.
Cc: mboton@gmail.com
Cc: Kevin Winchester <kjwinchester@gmail.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
ioport unification was broken for 32-bit; it was missing
the acutal pushf/popf EFLAGS manipulation (set_iopl_mask()).
Also, use of volatile looks like leftover cruft.
Cc: mboton@gmail.com
Cc: Kevin Winchester <kjwinchester@gmail.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
ioport_{32|64}.c unification.
This patch unifies the code from the ioport_32.c and ioport_64.c files.
Tested and working fine with i386 and x86_64 kernels.
Signed-off-by: Miguel Botón <mboton@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
For K8 system: 4G RAM with memory hole remapping enabled, or more than
4G RAM installed.
when try to use kexec second kernel, and the first doesn't include
gart_shutdown. the second kernel could have different aper position than
the first kernel. and second kernel could use that hole as RAM that is
still used by GART set by the first kernel. esp. when try to kexec
2.6.24 with sparse mem enable from previous kernel (from RHEL 5 or SLES
10). the new kernel will use aper by GART (set by first kernel) for
vmemmap. and after new kernel setting one new GART. the position will be
real RAM. the _mapcount set is lost.
Bad page state in process 'swapper'
page:ffffe2000e600020 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Pid: 0, comm: swapper Not tainted 2.6.24-rc7-smp-gcdf71a10-dirty #13
Call Trace:
[<ffffffff8026401f>] bad_page+0x63/0x8d
[<ffffffff80264169>] __free_pages_ok+0x7c/0x2a5
[<ffffffff80ba75d1>] free_all_bootmem_core+0xd0/0x198
[<ffffffff80ba3a42>] numa_free_all_bootmem+0x3b/0x76
[<ffffffff80ba3461>] mem_init+0x3b/0x152
[<ffffffff80b959d3>] start_kernel+0x236/0x2c2
[<ffffffff80b9511a>] _sinittext+0x11a/0x121
and
[ffffe2000e600000-ffffe2000e7fffff] PMD ->ffff81001c200000 on node 0
phys addr is : 0x1c200000
RHEL 5.1 kernel -53 said:
PCI-DMA: aperture base @ 1c000000 size 65536 KB
new kernel said:
Mapping aperture over 65536 KB of RAM @ 3c000000
So could try to disable that GART if possible.
According to Ingo
> hm, i'm wondering, instead of modifying the GART, why dont we simply
> _detect_ whatever GART settings we have inherited, and propagate that
> into our e820 maps? I.e. if there's inconsistency, then punch that out
> from the memory maps and just dont use that memory.
>
> that way it would not matter whether the GART settings came from a [old
> or crashing] Linux kernel that has not called gart_iommu_shutdown(), or
> whether it's a BIOS that has set up an aperture hole inconsistent with
> the memory map it passed. (or the memory map we _think_ i tried to pass
> us)
>
> it would also be more robust to only read and do a memory map quirk
> based on that, than actively trying to change the GART so early in the
> bootup. Later on we have to re-enable the GART _anyway_ and have to
> punch a hole for it.
>
> and as a bonus, we would have shored up our defenses against crappy
> BIOSes as well.
add e820 modification for gart inconsistent setting.
gart_fix_e820=off could be used to disable e820 fix.
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
These are useful in figuring out early-mapping problems.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
printk_address()'s second parameter is the reliability indication,
not the ebp. If we're printing regs->ip we're reliable by definition,
so pass a 1 here.
Signed-off-by: Arjan van de Ven
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The 32 bit x86 tree has a very useful feature that prints the Code: line
for the code even before the trapping instrution (and the start of the
trapping instruction is then denoted with a <>). Unfortunately, the 64 bit
x86 tree does not yet have this feature, making diagnosing backtraces harder
than needed.
This patch adds this feature in the same was as the 32 bit tree has
(including the same kernel boot parameter), and including a bugfix
to make the code use probe_kernel_address() rarther than a buggy (deadlocking)
__get_user.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
x86 32 bit already has this feature: This patch uses the stack frames with
frame pointer into an exact stack trace, by following the frame pointer.
This only affects kernels built with the CONFIG_FRAME_POINTER config option
enabled, and greatly reduces the amount of noise in oopses.
This code uses the traditional method of doing backtraces, but if it
finds a valid frame pointer chain, will use that to show which parts
of the backtrace are reliable and which parts are not
Due to the fragility and importance of the backtrace code, this needs to
be well reviewed and well tested before merging into mainlne.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch turns the x86 64 bit HANDLE_STACK macro in the backtrace code
into a function, just like 32 bit has. This is needed pre work in order to
get exact backtraces for CONFIG_FRAME_POINTER to work.
The function and it's arguments are not the same as 32 bit; due to the
exception/interrupt stack way of x86-64 there are a few differences.
This patch should not have any behavior changes, only code movement.
Due to the fragility and importance of the backtrace code, this needs to be
well reviewed and well tested before merging into mainlne.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Right now, we take the stack pointer early during the backtrace path, but
only calculate bp several functions deep later, making it hard to reconcile
the stack and bp backtraces (as well as showing several internal backtrace
functions on the stack with bp based backtracing).
This patch moves the bp taking to the same place we take the stack pointer;
sadly this ripples through several layers of the back tracing stack,
but it's not all that bad in the end I hope.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The 32 bit Frame Pointer backtracer code checks if the EBP is valid
to do a backtrace; however currently on a failure it just gives up
and prints nothing. That's not very nice; we can do better and still
print a decent backtrace.
This patch changes the backtracer to use the regular backtracing algorithm
at the same time as the EBP backtracer; the EBP backtracer is basically
used to figure out which part of the backtrace are reliable vs those
which are likely to be noise.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
For enhancing the 32 bit EBP based backtracer, I need the capability
for the backtracer to tell it's customer that an entry is either
reliable or unreliable, and the backtrace printing code then needs to
print the unreliable ones slightly different.
This patch adds the basic capability, the next patch will add a user
of this capability.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The current x86 32 bit FRAME_POINTER chasing code has a nasty bug in
that the EBP tracer doesn't actually update the value of EBP it is
tracing, so that the code doesn't actually switch to the irq stack
properly.
The result is a truncated backtrace:
WARNING: at timeroops.c:8 kerneloops_regression_test() (Not tainted)
Pid: 0, comm: swapper Not tainted 2.6.24-0.77.rc4.git4.fc9 #1
[<c040649a>] show_trace_log_lvl+0x1a/0x2f
[<c0406d41>] show_trace+0x12/0x14
[<c0407061>] dump_stack+0x6c/0x72
[<e0258049>] kerneloops_regression_test+0x44/0x46 [timeroops]
[<c04371ac>] run_timer_softirq+0x127/0x18f
[<c0434685>] __do_softirq+0x78/0xff
[<c0407759>] do_softirq+0x74/0xf7
=======================
This patch fixes the code to update EBP properly, and to check the EIP
before printing (as the non-framepointer backtracer does) so that
the same test backtrace now looks like this:
WARNING: at timeroops.c:8 kerneloops_regression_test()
Pid: 0, comm: swapper Not tainted 2.6.24-rc7 #4
[<c0405d17>] show_trace_log_lvl+0x1a/0x2f
[<c0406681>] show_trace+0x12/0x14
[<c0406ef2>] dump_stack+0x6a/0x70
[<e01f6040>] kerneloops_regression_test+0x3b/0x3d [timeroops]
[<c0426f07>] run_timer_softirq+0x11b/0x17c
[<c04243ac>] __do_softirq+0x42/0x94
[<c040704c>] do_softirq+0x50/0xb6
[<c04242a9>] irq_exit+0x37/0x67
[<c040714c>] do_IRQ+0x9a/0xaf
[<c04057da>] common_interrupt+0x2e/0x34
[<c05807fe>] cpuidle_idle_call+0x52/0x78
[<c04034f3>] cpu_idle+0x46/0x60
[<c05fbbd3>] rest_init+0x43/0x45
[<c070aa3d>] start_kernel+0x279/0x27f
=======================
This shows that the backtrace goes all the way down to user context now.
This bug was found during the port to 64 bit of the frame pointer backtracer.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
It's not too pretty, but I found this made the "PANIC: early exception"
messages become much more reliably useful: 1. print the vector number,
2. print the %cs value, 3. handle error-code-pushing vs non-pushing vectors.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The check for an unitialized clock event device triggers, when the local
apic timer is registered as a dummy clock event device for broadcasting.
Preset the multiplicator to avoid a false positive.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Check the APIC timer calibration result for sanity. When the frequency
is out of range, issue a warning and disable the local APIC timer.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
get_segment_eip has similarities to convert_rip_to_linear(),
and is used in a similar context. Move get_segment_eip to
step.c to allow easier consolidation.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Move out tick_nohz_stop_sched_tick() call from the loop in cpu_idle
same as 32-bit version.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use the fixup_exception() helper instead of the open-coded
search_extable() users.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Small step towards unifying traps_32|64.c. No functional
changes. Pull out a small helper from an if() statement
in die().
Marked as __kprobes as eventually we will want to call this
from do_page_fault similar to how X86_64 does it.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The machine check handler registers ioctl handler that is called
with the BKL held. Changing to register unlocked_ioctl instead.
Also mce ioctl handler does not seem to need any lock protection.
To: Andi Kleen <andi@firstfloor.org>
Cc: linux-kernel@vger.kernel.org
Cc: kernel-janitors@vger.kernel.org
Change the Machine check handler to use unlocked_ioctl instead of
ioctl handler. Also the mce ioctl handler does not need any lock
protection.
Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Fix various compilation problems as a result of changing pte_t.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Zachary Amsden <zach@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Return the size of bts_struct in the PTRACE_BTS_STATUS command.
Change types to u32.
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Unify arch/x86/kernel/acpi/sleep*.c
Pretty trivial unification; when two functions differed, it was
usually in error handling, and better of the two was picked up.
Signed-off-by: Pavel Machek <pavel@suse.cz>
Looks-okay-to: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The boot protocol has until now required that the initrd be located in
lowmem, which makes the lowmem/highmem boundary visible to the boot
loader. This was exported to the bootloader via a compile-time
field. Unfortunately, the vmalloc= command-line option breaks this
part of the protocol; instead of adding yet another hack that affects
the bootloader, have the kernel relocate the initrd down below the
lowmem boundary inside the kernel itself.
Note that this does not rely on HIGHMEM being enabled in the kernel.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch export the boot parameters via debugfs for debugging.
The files added are as follow:
boot_params/data : binary file for struct boot_params
boot_params/version : boot protocol version
This patch is based on 2.6.24-rc5-mm1 and has been tested on i386 and
x86_64 platform.
This patch is based on the Peter Anvin's proposal.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
reboot_{32|64}.c unification patch.
This patch unifies the code from the reboot_32.c and reboot_64.c files.
It has been tested in computers with X86_32 and X86_64 kernels and it
looks like all reboot modes work fine (EFI restart system hasn't been
tested yet).
Probably I made some mistakes (like I usually do) so I hope
we can identify and fix them soon.
Signed-off-by: Miguel Boton <mboton@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
While examining vmlinux namelist on i386 (nm -v vmlinux) I noticed :
c01021d0 t es7000_rename_gsi
c010221a T es7000_start_cpu
<Big Hole>
c0103000 T thread_saved_pc
and
c0113218 T acpi_restore_state_mem
c0113219 T acpi_save_state_mem
<Big Hole>
c0114000 t wakeup_code
This is because arch/x86/kernel/acpi/wakeup_32.S forces a .text alignment
of 4096 bytes. (I have no idea if it is really needed, since
arch/x86/kernel/acpi/wakeup_64.S uses a 16 bytes alignment *only*)
So arch/x86/kernel/built-in.o also has this alignment
arch/x86/kernel/built-in.o: file format elf32-i386
Sections:
Idx Name Size VMA LMA File off Algn
0 .text 00018c94 00000000 00000000 00001000 2**12
CONTENTS, ALLOC, LOAD, RELOC, READONLY, CODE
But as arch/x86/kernel/acpi/wakeup_32.o is not the first object linked
into arch/x86/kernel/built-in.o, linker had to build several holes to meet
alignement requirements, because of .o nestings in the kbuild process.
This can be solved by using a special section, .text.page_aligned, so that
no holes are needed.
# size vmlinux.before vmlinux.after
text data bss dec hex filename
4619942 422838 458752 5501532 53f25c vmlinux.before
4610534 422838 458752 5492124 53cd9c vmlinux.after
This saves 9408 bytes
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
I don't know of any case where they have been useful and they look ugly.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
# HG changeset patch
# User Jeremy Fitzhardinge <jeremy@xensource.com>
# Date 1199391030 28800
# Node ID 5d35c92fdf0e2c52edbb6fc4ccd06c7f65f25009
# Parent 22f6a5902285b58bfc1fbbd9e183498c9017bd78
x86/efi: fix improper use of lvalue
pgd_val is no longer valid as an lvalue, so don't try to assign to it.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Commits
- c52f61fcbdb2aa84f0e4d831ef07f375e6b99b2c
(x86: allow TSC clock source on AMD Fam10h and some cleanup)
- e30436f05d456efaff77611e4494f607b14c2782
(x86: move X86_FEATURE_CONSTANT_TSC into early cpu feature detection)
are supposed to fix the detection of contant TSC for AMD CPUs.
Unfortunately on x86_64 it does still not work with current x86/mm.
For a Phenom I still get:
...
TSC calibrated against PM_TIMER
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 2288.366 MHz processor.
...
We have to set c->x86_power in early_identify_cpu to properly detect
the CONSTANT_TSC bit in early_init_amd.
Attached patch fixes this issue. Following the relevant boot
messages when the fix is used:
...
TSC calibrated against PM_TIMER
time.c: Detected 2288.279 MHz processor.
...
Initializing CPU#1
...
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
...
Initializing CPU#2
...
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
...
Booting processor 3/4 APIC 0x3
...
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
...
Patch is against x86/mm (v2.6.24-rc8-672-ga9f7faa).
Please apply.
Set c->x86_power in early_identify_cpu. This ensures that
X86_FEATURE_CONSTANT_TSC can properly be set in early_init_amd.
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Trust the ACPI code to disable TSC instead when C3 is used.
AMD Fam10h does not disable TSC in any C states so the
check was incorrect there anyways after the change
to handle this like Intel on AMD too.
This allows to use the TSC when C3 is disabled in software
(acpi.max_c_state=2), but the BIOS supports it anyways.
Match i386 behaviour.
Cc: lenb@kernel.org
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
After a lot of discussions with AMD it turns out that TSC
on Fam10h CPUs is synchronized when the CONSTANT_TSC cpuid bit is set.
Or rather that if there are ever systems where that is not
true it would be their BIOS' task to disable the bit.
So finally use TSC gettimeofday on Fam10h by default.
Or rather it is always used now on CPUs where the AMD
specific CONSTANT_TSC bit is set.
This gives a nice speed bost for gettimeofday() on these systems
which tends to be by far the most common v/syscall.
On a Fam10h system here TSC gtod uses about 20% of the CPU time of
acpi_pm based gtod(). This was measured on 32bit, on 64bit
it is even better because TSC gtod() can use a vsyscall
and stay in ring 3, which acpi_pm doesn't.
The Intel check simply checks for CONSTANT_TSC too without hardcoding
Intel vendor. This is equivalent on 64bit because all 64bit capable Intel
CPUs will have CONSTANT_TSC set.
On Intel there is no CPU supplied CONSTANT_TSC bit currently,
but we synthesize one based on hardcoded knowledge which steppings
have p-state invariant TSC.
So the new logic is now: On CPUs which have the AMD specific
CONSTANT_TSC bit set or on Intel CPUs which are new enough
to be known to have p-state invariant TSC always use
TSC based gettimeofday()
Cc: lenb@kernel.org
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Need this in the next patch in time_init and that happens early.
This includes a minor fix on i386 where early_intel_workarounds()
[which is now called early_init_intel] really executes early as
the comments say.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
rdtsc is now speculation-safe, so no need for the sync variants of
the APIs.
[ mingo@elte.hu: removed the nsec_barrier() complication. ]
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
map vsyscalls early enough. This is important if a __vsyscall_fn
function is used by other kernel code too.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LFENCE is available on XMM2 or higher Intel CPUs - not XMM or higher...
this caused boot failures on XMM1 & !XMM1 capable CPUs.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
According to Intel RDTSC can be always synchronized with LFENCE
on all current CPUs. Implement the necessary CPUID bit for that.
It is unclear yet if that is true for all future CPUs too,
but if there's another way the kernel can be always updated.
Cc: asit.k.mallick@intel.com
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
According to AMD RDTSC can be synchronized through MFENCE.
Implement the necessary CPUID bit for that.
Cc: andreas.herrmann3@amd.com
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
More white space and coding style clean up.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
White space and coding style clean up.
Make apic_32/64.c similar.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When developing the Kprobes arch code for ARM, I ran across some code
found in x86 and s390 Kprobes arch code which I didn't consider as
good as it could be.
Once I figured out what the code was doing, I changed the code
for ARM Kprobes to work the way I felt was more appropriate.
I've tested the code this way in ARM for about a year and would
like to push the same change to the other affected architectures.
The code in question is in kprobe_exceptions_notify() which
does:
====
/* kprobe_running() needs smp_processor_id() */
preempt_disable();
if (kprobe_running() &&
kprobe_fault_handler(args->regs, args->trapnr))
ret = NOTIFY_STOP;
preempt_enable();
====
For the moment, ignore the code having the preempt_disable()/
preempt_enable() pair in it.
The problem is that kprobe_running() needs to call smp_processor_id()
which will assert if preemption is enabled. That sanity check by
smp_processor_id() makes perfect sense since calling it with preemption
enabled would return an unreliable result.
But the function kprobe_exceptions_notify() can be called from a
context where preemption could be enabled. If that happens, the
assertion in smp_processor_id() happens and we're dead. So what
the original author did (speculation on my part!) is put in the
preempt_disable()/preempt_enable() pair to simply defeat the check.
Once I figured out what was going on, I considered this an
inappropriate approach. If kprobe_exceptions_notify() is called
from a preemptible context, we can't be in a kprobe processing
context at that time anyways since kprobes requires preemption to
already be disabled, so just check for preemption enabled, and if
so, blow out before ever calling kprobe_running(). I wrote the ARM
kprobe code like this:
====
/* To be potentially processing a kprobe fault and to
* trust the result from kprobe_running(), we have
* be non-preemptible. */
if (!preemptible() && kprobe_running() &&
kprobe_fault_handler(args->regs, args->trapnr))
ret = NOTIFY_STOP;
====
The above code has been working fine for ARM Kprobes for a year.
So I changed the x86 code (2.6.24-rc6) to be the same way and ran
the Systemtap tests on that kernel. As on ARM, Systemtap on x86
comes up with the same test results either way, so it's a neutral
external functional change (as expected).
This issue has been discussed previously on linux-arm-kernel and the
Systemtap mailing lists. Pointers to the by base for the two
discussions:
http://lists.arm.linux.org.uk/lurker/message/20071219.223225.1f5c2a5e.en.htmlhttp://sourceware.org/ml/systemtap/2007-q1/msg00251.html
Signed-off-by: Quentin Barnes <qbarnes@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ananth N Mavinakayahanalli <ananth@in.ibm.com>
Acked-by: Ananth N Mavinakayahanalli <ananth@in.ibm.com>
This patch eliminates most of code-style errors
discovered by checkpatch.pl on arch/x86/kernel/apm_32.c
no code changed:
text data bss dec hex filename
12142 1837 84 14063 36ef apm_32.o.before
12142 1837 84 14063 36ef apm_32.o.after
md5:
2676b881ad55e387da4a995e8b9ee372 apm_32.o.before.asm
2676b881ad55e387da4a995e8b9ee372 apm_32.o.after.asm
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Combine the 32 and 64 bit specific Makefiles in one file.
While doing so link order was (almost) preserved on 32 bit
but on 64 bit link order changed a lot.
Patch was checked with defconfig + allyesconfig builds.
The same .o files were linked in these configurations.
To keep readability of the Makefiles a few Kconfig
symbols was added/modified and it was checked that
they were not used anywhere else.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Make the control flow of kprobe_handler more obvious.
Collapse the separate if blocks/gotos with if/else blocks
this unifies the duplication of the check for a breakpoint
instruction race with another cpu.
Create two jump targets:
preempt_out: re-enables preemption before returning ret
out: only returns ret
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The functions time_before, time_before_eq, time_after, and time_after_eq
are more robust for comparing jiffies against other values.
A simplified version of the semantic patch making this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@ change_compare_np @
expression E;
@@
(
- jiffies <= E
+ time_before_eq(jiffies,E)
|
- jiffies >= E
+ time_after_eq(jiffies,E)
|
- jiffies < E
+ time_before(jiffies,E)
|
- jiffies > E
+ time_after(jiffies,E)
)
@ include depends on change_compare_np @
@@
#include <linux/jiffies.h>
@ no_include depends on !include && change_compare_np @
@@
#include <linux/...>
+ #include <linux/jiffies.h>
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The functions time_before, time_before_eq, time_after, and time_after_eq
are more robust for comparing jiffies against other values.
A simplified version of the semantic patch making this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@ change_compare_np @
expression E;
@@
(
- jiffies <= E
+ time_before_eq(jiffies,E)
|
- jiffies >= E
+ time_after_eq(jiffies,E)
|
- jiffies < E
+ time_before(jiffies,E)
|
- jiffies > E
+ time_after(jiffies,E)
)
@ include depends on change_compare_np @
@@
#include <linux/jiffies.h>
@ no_include depends on !include && change_compare_np @
@@
#include <linux/...>
+ #include <linux/jiffies.h>
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Move #ifdef around function definiton into the function and
unconditionally return on X86_32. Saves an ifdef from the
one callsite.
[ mingo@elte.hu: minor cleanup. ]
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Fold some small ifdefs into a helper function.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
#88: FILE: arch/x86/kernel/cpu/mcheck/k7.c:34:
+ rdmsr(MSR_IA32_MC0_STATUS+i*4,low, high);
^
ERROR: need space after that ',' (ctx:VxV)
#142: FILE: arch/x86/kernel/cpu/mcheck/p4.c:170:
+ rdmsr(MSR_IA32_MC0_STATUS+i*4,low, high);
^
ERROR: need space after that ',' (ctx:VxV)
#180: FILE: arch/x86/kernel/cpu/mcheck/p6.c:34:
+ rdmsr(MSR_IA32_MC0_STATUS+i*4,low, high);
^
total: 3 errors, 0 warnings, 114 lines checked
Your patch has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
Please run checkpatch prior to sending patches
Cc: Min Zhang <mzhang@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
#40: FILE: arch/x86/kernel/cpu/mcheck/k7.c:46:
+ snprintf (misc, 20, "[%08x%08x]", ahigh, alow);
WARNING: line over 80 characters
#45: FILE: arch/x86/kernel/cpu/mcheck/k7.c:50:
+ snprintf (addr, 24, " at %08x%08x", ahigh, alow);
WARNING: no space between function name and open parenthesis '('
#45: FILE: arch/x86/kernel/cpu/mcheck/k7.c:50:
+ snprintf (addr, 24, " at %08x%08x", ahigh, alow);
WARNING: no space between function name and open parenthesis '('
#48: FILE: arch/x86/kernel/cpu/mcheck/k7.c:52:
+ printk (KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n",
WARNING: no space between function name and open parenthesis '('
#65: FILE: arch/x86/kernel/cpu/mcheck/p4.c:161:
+ printk (KERN_DEBUG "CPU %d: EIP: %08x EFLAGS: %08x\n"
WARNING: no space between function name and open parenthesis '('
#88: FILE: arch/x86/kernel/cpu/mcheck/p4.c:182:
+ snprintf (misc, 20, "[%08x%08x]", ahigh, alow);
WARNING: line over 80 characters
#93: FILE: arch/x86/kernel/cpu/mcheck/p4.c:186:
+ snprintf (addr, 24, " at %08x%08x", ahigh, alow);
WARNING: no space between function name and open parenthesis '('
#93: FILE: arch/x86/kernel/cpu/mcheck/p4.c:186:
+ snprintf (addr, 24, " at %08x%08x", ahigh, alow);
WARNING: no space between function name and open parenthesis '('
#96: FILE: arch/x86/kernel/cpu/mcheck/p4.c:188:
+ printk (KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n",
WARNING: no space between function name and open parenthesis '('
#120: FILE: arch/x86/kernel/cpu/mcheck/p6.c:46:
+ snprintf (misc, 20, "[%08x%08x]", ahigh, alow);
WARNING: line over 80 characters
#125: FILE: arch/x86/kernel/cpu/mcheck/p6.c:50:
+ snprintf (addr, 24, " at %08x%08x", ahigh, alow);
WARNING: no space between function name and open parenthesis '('
#125: FILE: arch/x86/kernel/cpu/mcheck/p6.c:50:
+ snprintf (addr, 24, " at %08x%08x", ahigh, alow);
WARNING: no space between function name and open parenthesis '('
#128: FILE: arch/x86/kernel/cpu/mcheck/p6.c:52:
+ printk (KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n",
total: 0 errors, 13 warnings, 100 lines checked
Your patch has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
Please run checkpatch prior to sending patches
Cc: Min Zhang <mzhang@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
SMP, the machine check exception dispatches all logical processors within a
physical package to the machine-check exception handler, so the printk
within each handler outputs concurrently and makes the output unreadable.
Refer to Intel system programming guide Part 1 Section 7.8.5
http://developer.intel.com/design/processor/manuals/253668.pdf
Signed-off-by: Min Zhang <mzhang@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
support according to fixes of x86_64 support.
- Delete efi_rt_lock because it is used during system early boot,
before SMP is initialized.
- Change local_flush_tlb() to __flush_tlb_all() to flush global page
mapping.
- Clean up includes.
- Revise Kconfig description.
- Enable noefi kernel parameter on i386.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
x86_read_per_cpu() and its writeish sister are not present in x86_64. So in
this patch, we replace them with __get_cpu_var(), which is present in both
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Like i386, x86_64 also need to include its own patching function.
(Well, if you're not in a hurry, and don't care about speed, you don't
really _need_ ;-))
So here they are. Not much different in essence from i386
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The core patching code for paravirt is sufficiently different
among i386 and x86_64, and we move them to specific files.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The assembly code in entry_64.S issues a bunch of privileged instructions,
like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so,
and we then replace them with macros that will do the right thing.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds paravirt hook for swapgs operation, which is a privileged
operation in x86_64.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds a field in pv_cpu_ops for a paravirtualized hook
for rdtscp, needed for x86_64.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch changes paravirt_32.c to paravirt.c. The goal
is to have paravirt support in x86_64, so we do it in a common file
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pass the buffer size for (most) ptrace commands that pass user-allocated buffers and check that size before accessing the buffer. Unfortunately, PTRACE_BTS_GET already uses all 4 parameters.
Commands that access user buffers return the number of bytes or records read or written.
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Support BTS recording of 32bit and 64bit tasks from 32bit or 64bit tasks.
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Check the rlimit of the tracing task for total and locked memory when allocating the BTS buffer.
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Move some deeply indented code related to re-entrance processing
from kprobe_handler() to reenter_kprobe().
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[ mhiramat@redhat.com: updated it to latest x86.git ]
Factor common X86_32, X86_64 kprobe reenter logic from deeply
indented section to helper function.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Fix a preemption bug in kprobe_handler(). It has to call preempt_enable()
before returning.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Aviod TLB flush IPIs during C3 states by voluntary leave_mm()
before entering C3.
The performance impact of TLB flush on C3 should not be significant with
respect to C3 wakeup latency. Also, CPUs tend to flush TLB in hardware while in
C3 anyways.
On a 8 logical CPU system, running make -j2, the number of tlbflush IPIs goes
down from 40 per second to ~ 0. Total number of interrupts during the run
of this workload was ~1200 per second, which makes it ~3% savings in wakeups.
There was no measurable performance or power impact however.
[ akpm@linux-foundation.org: symbol export fixes. ]
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This removes duplicated code by calling the generic ptrace_request and
compat_ptrace_request functions for the things they already handle.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This makes ELF core dumps of 32-bit processes include a new
note type NT_386_TLS (0x200) giving the contents of the TLS
slots in struct user_desc format. This lets post mortem
examination figure out what the segment registers mean like
the debugger does with get_thread_area on a live process.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This removes a bunch of dead code that is no longer needed now
that the user_regset interfaces are being used for all these jobs.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This cleans up the PTRACE_*REGS* request code so each one is just a
simple call to copy_regset_to_user or copy_regset_from_user. The
ptrace layouts already match the user_regset formats (core dump formats).
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This defines task_user_regset_view and the tables
describing the x86 user_regset layouts for 32 and 64.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This adds accessor functions in the user_regset style for
the general registers (struct user_regs_struct).
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This adds accessor functions in the user_regset style for the TLS data.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This cleans up the TLS code to use struct desc_struct and to separate the
encoding and installation magic from the interface wrappers.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This removes all the old code that is no longer used after
the i387 unification and cleanup. The i387_64.h is renamed
to i387.h with no changes, but since it replaces the nonempty
one-line stub i387.h it looks like a big diff and not a rename.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This revamps the i387 code to be shared across 32-bit, 64-bit,
and 32-on-64. It does so by consolidating the code in one place
based on the user_regset accessor interfaces. This switches
32-bit to using the i387_64.h header and 64-bit to using the
i387.c that was previously i387_32.c, but that's what took the
least cleanup in each file. Here i387.h is stubbed to always
include i387_64.h rather than renaming the file, to keep this
diff smaller and easier to read.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This renames arch/x86/kernel/{i387_32.c => i387.c}.
This is a pure renaming, but paves the way for merging
the 32-bit and 64-bit versions of this code.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This moves some code into asm-x86/i387_64.h in preparation for
unifying this code between 32 and 64. The 32-bit versions of
some things are copied in some existing names changed to match
32-bit names and share code. For 64, save_i387 is moved into
an inline from i387_64.c; this matches restore_i387, which is
already an inline, and makes sense since there is exactly one
caller (in signal_64.c). The save_i387 function could use more
cosmetic cleanup, but it is just moved verbatim in this patch.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Eliminate __always_inline, all of these static functions are
only called once. Minor whitespace cleanup. Eliminate one
supefluous return at end of void function. Change the one
#ifndef to #ifdef to match the sense of the rest of the config
tests.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Introduce fixup_exception() on 64-bit and use it in kprobes to
eliminate an #ifdef.
Only 64-bit needs search_extable() due to a stepping bug.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch moves definitions that are present in only one of the files
(between processor_32.h and processor_64.h), to processor.h. They're mostly
structures and function definitions.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
x86_cpuinfo is one more to the family of "not fundamentally different"
structs. It's unified in processor.h, with very specific fields enclosed
around ifdefs.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Paravirt guests need to inform the underlying hypervisor whenever the sp0
tss field changes. i386 already has such a function, and we use it for
x86_64 too. There's an unnecessary (for 64-bit) msr handling part in the original
version, and it is placed around an ifdef. Making no more sense in
processor_32.h, it is moved to the common header
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Although slighly different, the tss_struct is very similar in x86_64 and
i386. The really different part, which matchs the hardware vision of it, is
now called x86_hw_tss, and each of the architectures provides yours.
It's then used as a field in the outter tss_struct.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
There's no need for the *_MASK flags (TF_MASK, IF_MASK, etc), found in
processor.h (both _32 and _64). They have a one-to-one mapping with the
EFLAGS value. This patch removes the definitions, and use the already
existent X86_EFLAGS_ version when applicable.
[ roland@redhat.com: KVM build fixes. ]
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
clean up checkpatch warnings/errors on i387_32.c
The old and new i387_32.s (asm listings) were checked with diff to
be identical so it's safe to apply this patch.
Signed-off-by: Cyrill Gorcunov <gorunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Recently a kdump bug was discovered in which a system would hang inside
calibrate_delay during the booting of the kdump kernel. This was caused
by the fact that the jiffies counter was not being incremented during
timer calibration. The root cause of this problem was found to be a
bios misconfiguration of the hypertransport bus. On system affected by
this hang, the bios had assigned APIC ids which used extended apic bits
(more than the nominal 4 bit ids's), but failed to configure bit 17 of
the hypertransport transaction config register, which indicated that the
mask for the destination field of interrupt packets accross the ht bus
(see section 3.3.9 of
http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26094.PDF).
If a crash occurs on a cpu with an APIC id that extends beyond 4 bits,
it will not recieve interrupts during the kdump kernel boot, and this
hang will be the result. The fix is to add this patch, whcih add an
early pci quirk check, to forcibly enable this bit in the httcfg
register. This enables all cpus on a system to receive interrupts, and
allows kdump kernel bootup to procede normally.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Its previous use in a call to on_each_cpu() was pointless, as at the
time that code gets executed only one CPU is online. Further, the
function can be __cpuinit, and for this to work without
CONFIG_HOTPLUG_CPU setup_nmi() must also get an attribute (this one
can even be __init; on 64-bits check_timer() also was lacking that
attribute).
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
.. allowing to remove their declarations from a global include file
(the symbols don't exist for anything but x86).
Likewise for 64-bits' fix_processor_context(), just that that one was
properly declared in an arch-specific header.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The array is never written, and on 64-bits it's not even being used
past initial boot.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This requires making die() return a value, making its callers honor
this (and be prepared that it may return), and making oops_end() have
two additional parameters.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch unifies kprobes code.
- Unify kprobes_*.h to kprobes.h
- Unify kprobes_*.c to kprobes.c
(Differences are separated by ifdefs)
- Most differences are related to REX prefix and rip relatives.
- Two inline assembly code are different.
- One difference in kprobe_handlre()
- One fixup exception code is different, but it will be unified
if mm/extable_*.c are unified.
- Merge history logs into arch/x86/kernel/kprobes.c.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Jim Keniston <jkenisto@us.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch cleanup kprobes code on x86 for unification.
This patch is based on Arjan's previous work.
- Remove spurious whitespace changes
- Add harmless includes
- Make the 32/64 files more identical
- Generalize structure fields' and local variable name.
- Wrap accessing to stack address by macros.
- Modify bitmap making macro.
- Merge fixup code into is_riprel() and change its name to fix_riprel().
- Set MAX_INSN_SIZE to 16 on both arch.
- Use u32 for bitmaps on both architectures.
- Clarify some comments.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Jim Keniston <jkenisto@us.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds kretprobe-booster to kprobes_64.c.
- Changes are based on x86-32.
- Rewrite register saving/restoring code
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds kprobe-booster to kprobes_64.c.
- Changes are based on x86-32.
- Add REX prefix checking code.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Jim Keniston <jkenisto@us.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Here's the new ptrace BTS API that supports two different overflow handling mechanisms (wrap-around and buffer-full-signal) to support two different use cases (debugging and profiling).
It further combines buffer allocation and configuration.
Opens:
- memory rlimit
- overflow signal
What would be the right signal to use?
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Change the ptrace interface to mimick an array from newst to oldest.
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Replace sched_clock() with jiffies for BTS timestamps.
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Because the EFI memory map are converted to e820 memory map in bootloader, the
EFI memory map handling code is removed to clean up.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch removes the duplicated code between efi_32.c and efi.c.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds support for several EFI runtime services for EFI x86_64
system.
The EFI support for emergency_restart is added.
Signed-off-by: Chandramouli Narayanan <mouli@linux.intel.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds basic runtime services support for EFI x86_64 system. The
main file of the patch is the addition of efi_64.c for x86_64. This file is
modeled after the EFI IA32 avatar. EFI runtime services initialization are
implemented in efi_64.c. Some x86_64 specifics are worth noting here. On
x86_64, parameters passed to EFI firmware services need to follow the EFI
calling convention. For this purpose, a set of functions named efi_call<x>
(<x> is the number of parameters) are implemented. EFI function calls are
wrapped before calling the firmware service. The duplicated code between
efi_32.c and efi_64.c is placed in efi.c to remove them from efi_32.c.
Signed-off-by: Chandramouli Narayanan <mouli@linux.intel.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Converted to a mutex, and changed the name to mce_read_mutex.
Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add the ability to reboot an x86_64 based machine using the RESET_REG in the
FADT ACPI table.
Signed-off-by: Aaron Durbin <adurbin@google.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
fastcall is always defined to be empty, remove it from arch/x86
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch moves _set_gate and its users to desc.h. We can now
use common code for x86_64 and i386.
[ mingo@elte.hu: set_system_gate() fixes for nasty crashes. ]
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch makes get_desc_base() receive a struct desc_struct,
and then uses its internal fields to compute the base address.
This is done at both i386 and x86_64, and then it is moved
to common header
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
this patch changes the signature of write_ldt_entry.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
CC: Zachary Amsden <zach@vmware.com>
CC: Jeremy Fitzhardinge <Jeremy.Fitzhardinge.citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch changes the write_gdt_entry function signature.
Instead of the old "a" and "b" parameters, it now receives
a pointer to a desc_struct, and the size of the entry being
handled. This is because x86_64 can have some 16-byte entries
as well as 8-byte ones.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
CC: Zachary Amsden <zach@vmware.com>
CC: Jeremy Fitzhardinge <Jeremy.Fitzhardinge.citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch introduces fill_ldt(), which populates a ldt descriptor
from a user_desc in once, instead of relying in the LDT_entry_a and
LDT_entry_b macros
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch modifies the write_ldt() function to make use
of the new struct desc_struct instead of entry_1 and entry_2
entries
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
this patch changes write_idt_entry signature. It now takes a gate_desc
instead of the a and b parameters. It will allow it to be later unified
between i386 and x86_64.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
CC: Zachary Amsden <zach@vmware.com>
CC: Jeremy Fitzhardinge <Jeremy.Fitzhardinge.citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To account for the differences in gate descriptor in i386 and x86_64
a gate_desc type is introduced.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch changes the name of x86_64 macro used to access the per-cpu
gdt. It is now equal to the i386 version, which will allow code to be shared.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch unifies struct desc_ptr between i386 and x86_64.
They can be expressed in the exact same way in C code, only
having to change the name of one of them. As Xgt_desc_struct
is ugly and big, this is the one that goes away.
There's also a padding field in i386, but it is not really
needed in the C structure definition.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch aims to make the access of struct desc_struct variables
equal across architectures. In this patch, I unify the i386 and x86_64
versions under an anonymous union, keeping the way they are accessed
untouched (a and b for 32-bit code, individual bit-fields for 64-bit).
This solution is not beautiful, but will allow us to integrate common
code that differed by the way descriptors were used. This is to be viewed
incrementally. There's simply too much code to be fixed at once.
In the future, goal is to set up in a single way of acessing
the desc_struct fields.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch prepares the x86_64 architecture initialization for
paravirt. It requires a memory initialization step, which is done
by implementing 64-bit version for machine_specific_memory_setup,
and putting an ARCH_SETUP hook, for guest-dependent initialization.
This last step is done akin to i386
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch add provisions for time related functions so they
can be later replaced by paravirt versions.
it basically encloses {g,s}et_wallclock inside the
already existent functions update_persistent_clock and
read_persistent_clock, and defines {s,g}et_wallclock
to the core of such functions.
it also allow for a later-on-game time initialization, as done
by i386. Paravirt guests can set a function to do their own
initialization this way.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
under paravirt, read cr2 cannot be issued directly anymore.
So wrap it in a macro, defined to the operation itself in case
paravirt is off, but to something else if we have paravirt
in the game
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
With paravirualization, hypervisors needs to handle the gdt,
that was right to this point only used at very early
inialization code. Hypervisors (lguest being the current case)
are commonly modules, so make it an export
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Export math_state_restore symbol, so it can be used for hypervisors.
They are commonly loaded as modules (lguest being an example).
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Resend using different mail client
Changes to the last version:
- split implementation into two layers: ds/bts and ptrace
- renamed TIF's
- save/restore ds save area msr in __switch_to_xtra()
- make block-stepping only look at BTF bit
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch puts together pieces of system_{32,64}.h that
looks like the same. It's the first step towards integration
of this file.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
#39: FILE: arch/ia64/ia32/binfmt_elf32.c:229:
+elf32_map (struct file *filep, unsigned long addr, struct elf_phdr *eppnt, int prot, int type, unsigned long unused)
WARNING: no space between function name and open parenthesis '('
#39: FILE: arch/ia64/ia32/binfmt_elf32.c:229:
+elf32_map (struct file *filep, unsigned long addr, struct elf_phdr *eppnt, int prot, int type, unsigned long unused)
WARNING: line over 80 characters
#67: FILE: arch/x86/kernel/sys_x86_64.c:80:
+ new_begin = randomize_range(*begin, *begin + 0x02000000, 0);
ERROR: use tabs not spaces
#110: FILE: arch/x86/kernel/sys_x86_64.c:185:
+ ^I mm->cached_hole_size = 0;$
ERROR: use tabs not spaces
#111: FILE: arch/x86/kernel/sys_x86_64.c:186:
+ ^I^Imm->free_area_cache = mm->mmap_base;$
ERROR: use tabs not spaces
#112: FILE: arch/x86/kernel/sys_x86_64.c:187:
+ ^I}$
ERROR: use tabs not spaces
#141: FILE: arch/x86/kernel/sys_x86_64.c:216:
+ ^I^I/* remember the largest hole we saw so far */$
ERROR: use tabs not spaces
#142: FILE: arch/x86/kernel/sys_x86_64.c:217:
+ ^I^Iif (addr + mm->cached_hole_size < vma->vm_start)$
ERROR: use tabs not spaces
#143: FILE: arch/x86/kernel/sys_x86_64.c:218:
+ ^I^I mm->cached_hole_size = vma->vm_start - addr;$
ERROR: use tabs not spaces
#157: FILE: arch/x86/kernel/sys_x86_64.c:232:
+ ^Imm->free_area_cache = TASK_UNMAPPED_BASE;$
ERROR: need a space before the open parenthesis '('
#291: FILE: arch/x86/mm/mmap_64.c:101:
+ } else if(mmap_is_legacy()) {
WARNING: braces {} are not necessary for single statement blocks
#302: FILE: arch/x86/mm/mmap_64.c:112:
+ if (current->flags & PF_RANDOMIZE) {
+ mm->mmap_base += ((long)rnd) << PAGE_SHIFT;
+ }
WARNING: line over 80 characters
#314: FILE: fs/binfmt_elf.c:48:
+static unsigned long elf_map (struct file *, unsigned long, struct elf_phdr *, int, int, unsigned long);
WARNING: no space between function name and open parenthesis '('
#314: FILE: fs/binfmt_elf.c:48:
+static unsigned long elf_map (struct file *, unsigned long, struct elf_phdr *, int, int, unsigned long);
WARNING: line over 80 characters
#429: FILE: fs/binfmt_elf.c:438:
+ eppnt, elf_prot, elf_type, total_size);
ERROR: need space after that ',' (ctx:VxV)
#480: FILE: fs/binfmt_elf.c:939:
+ elf_prot, elf_flags,0);
^
total: 9 errors, 7 warnings, 461 lines checked
Your patch has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
Please run checkpatch prior to sending patches
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
main executable of (specially compiled/linked -pie/-fpie) ET_DYN binaries
onto a random address (in cases in which mmap() is allowed to perform a
randomization).
The code has been extraced from Ingo's exec-shield patch
http://people.redhat.com/mingo/exec-shield/
[akpm@linux-foundation.org: fix used-uninitialsied warning]
[kamezawa.hiroyu@jp.fujitsu.com: fixed ia32 ELF on x86_64 handling]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Targetting paravirt, this patch introduces native_read_tscp, in
place of rdtscp() macro. When in a paravirt guest, this will
involve a function call, and thus, cannot be done in the vdso area.
These users then have to call the native version directly
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch splits get_cycles_sync() into __get_cycles_sync(),
and the rdtscll part. Paravirt guests cannot issue rdtscl directly,
as it involves a function call in vdso area.
So, using the __get_cycles_sync() base, we introduce vget_cycles_sync,
which then calls the native version of rdtscll. Ideally, however, a guest
should define its own clocksource, together with a vread function
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch turns the sched_clock into native_sched_clock.
sched clock becomes a weak symbol, which can then give its
place to a paravirt definition.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Among other things, using -traditional as a gcc option stops us from
using macro token pasting, which is a feature we heavily rely on.
There was still a use of -traditional in arch/x86/kernel/Makefile_64,
which this patch removes.
I don't see any problems building kernels in my x86_64 box without
-traditional.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
White space and coding style clean up.
Make process_32/64.c similar.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
commit c434b7a6ae
(x86: avoid wasting IRQs for PCI devices)
created a concept of "IRQ compression" on i386
to conserve IRQ numbers on systems with many
sparsely populated IO APICs.
The same scheme was also added to x86_64,
but later removed when x86_64 recieved an IRQ over-haul
that made it unnecessary -- including per-CPU
IRQ vectors that greatly increased the IRQ capacity
on the machine.
i386 has not received the analogous over-haul,
and thus a previous attempt to delete IRQ compression
from i386 was rejected on the theory that there may
exist machines that actually need it. The fact is
that the author of IRQ compression patch was unable
to confirm the actual existence of such a system.
As a result, all i386 kernels with IOAPIC support
pay the following:
1. confusion
IRQ compression re-names the traditional IOAPIC
pin numbers (aka ACPI GSI's) into sequential IRQ #s:
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 20 (level, low) -> IRQ 16
This makes /proc/interrupts look different
depending on system configuration and device probe order.
It is also different than the x86_64 kernel running
on the exact same system. As a result, programmers
get confused when comparing systems.
2. complexity
The IRQ code in Linux is already overly complex,
and IRQ compression makes it worse. There have
already been two bug workarounds related to IRQ
compression -- the IRQ0 timer workaround and
the VIA PCI IRQ workaround.
3. size
All i386 kernels with IOAPIC support contain an int[4096] --
a 4 page array to contain the renamed IRQs.
So while the irq compression code on i386 should really
be deleted -- even before merging the x86_64 irq-overhaul,
this patch simply disables it on all high volume systems
to avoid problems #1 and #2 on most all i386 systems.
A large system with pin numbers >=64 will still have compression
to conserve limited IRQ numbers for sparse IOAPICS. However,
the vast majority of the planet, those with only pin numbers < 64
will use an identity GSI -> IRQ mapping.
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
This changes size-specific register names (eip/rip, esp/rsp, etc.) to
generic names in the thread and tss structures.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This removes the old separate 64-bit and ia32 ptrace source files.
They are no longer used.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This switches over the 64-bit build to use the shared ptrace code,
instead of the old ptrace_64.c and arch/x86/ia32/ptrace32.c code.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This moves the sys32_ptrace code into arch/x86/kernel/ptrace.c,
verbatim except for a few hard-coded sizes replaced with sizeof.
Here this code can use the shared local functions in this file.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This reimplements the 64-bit IA32-emulation register access
functions in arch/x86/kernel/ptrace.c, where they can share
some guts with the native access functions directly.
These functions are not used yet, but this paves the way to move
IA32 ptrace support into this file to share its local functions.
[akpm@linuxfoundation.org: Build fix]
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This moves the 64-bit syscall tracing functions into ptrace.c,
so that ptrace_64.c becomes entirely obsolete.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This adds 64-bit support to arch_ptrace in arch/x86/kernel/ptrace.c,
so this function can be used for native ptrace on both 32 and 64.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This merges 64-bit support into the low-level register access
functions in arch/x86/kernel/ptrace.c, paving the way to share
this file between 32-bit and 64-bit builds.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This cleans up the getreg/putreg functions to move the special cases
(segment registers and eflags) out into their own subroutines.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This cleans up the FLAG_MASK macro to use symbolic constants instead of a
magic number.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This renames ptrace_32.c back to ptrace.c, in preparation
for merging the 32/64 versions of these files.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This replaces the debugreg[7] member of thread_struct with individual
members debugreg0, etc. This saves two words for the dummies 4 and 5,
and harmonizes the code between 32 and 64.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This generalizes the getreg and putreg functions so they can be used on the
current task, as well as on a task stopped in TASK_TRACED and switched off.
This lays the groundwork to share this code for all kinds of user-mode
machine state access, not just ptrace.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This generalizes the getreg and putreg functions so they can be used on the
current task, as well as on a task stopped in TASK_TRACED and switched off.
This lays the groundwork to share this code for all kinds of user-mode
machine state access, not just ptrace.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This canonicalizes the indentation in the getreg and putreg functions.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This canonicalizes the indentation in the getreg and putreg functions.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This cleans up arch/x86/kernel/setup64.c to use the X86_EFLAGS_* constants
from <asm/processor-flags.h> instead of the EF_* enum in <asm/ptrace.h>.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Switch struct sigcontext (defined in <asm/sigcontext*.h>) to using
register names withut e- or r-prefixes for both 32- and 64-bit x86.
This is intended as a preliminary step in unifying this code between
architectures.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Switch struct user_regs_struct (defined in <asm/user.h>, which is no
longer exported to userspace) to using register names without e- or
r-prefixes for both 32 and 64 bit x86. This is intended as a
preliminary step in unifying this code between architectures.
Also, be a bit more strict in truncating 32-bit "extended" segment
register values to 16 bits.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We have a lot of code which differs only by the naming of specific
members of structures that contain registers. In order to enable
additional unifications, this patch drops the e- or r- size prefix
from the register names in struct pt_regs, and drops the x- prefixes
for segment registers on the 32-bit side.
This patch also performs the equivalent renames in some additional
places that might be candidates for unification in the future.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The patch to suppress bitops-related warnings added a pile of ugly
casts. Many of these were related to the management of x86 CPU
capabilities. Clean these up by adding specific set/clear_cpu_cap
macros, and use them consistently.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
'for_each_possible_cpu(i)' when there's a _remote possibility_ of
dereferencing a non-allocated per_cpu variable involved.
All files except mm/vmstat.c are x86 arch.
Thanks to pageexec@freemail.hu for pointing this out.
Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: <pageexec@freemail.hu>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This adjusts the x86 kprobes implementation to cope with per-thread
MSR_IA32_DEBUGCTLMSR being set for user mode. I haven't delved deep
enough into the kprobes code to be really sure this covers all the
cases where the user-mode BTF setting needs to be cleared or restored.
It looks about right to me.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This implements user-mode step-until-branch on x86 using the BTF bit
in MSR_IA32_DEBUGCTLMSR. It's just like single-step, only less so.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This adds low-level support for a per-thread value of MSR_IA32_DEBUGCTLMSR.
The per-thread value is switched in when TIF_DEBUGCTLMSR is set.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This cleans up the 32-bit ptrace code to separate the guts of the
debug register access from the implementation of PTRACE_PEEKUSR and
PTRACE_POKEUSR. The new functions ptrace_[gs]et_debugreg match the
new 64-bit entry points for parity, but they don't need to be global.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This cleans up the 64-bit ptrace code to separate the guts of the
debug register access from the implementation of PTRACE_PEEKUSR and
PTRACE_POKEUSR. The new functions ptrace_[gs]et_debugreg are made
global so that the ia32 code can later be changed to call them too.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This cleans up the 64-bit ptrace code to use task_pt_regs instead of its
own redundant code that does the same thing a different way.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This cleans up the 32-bit ptrace code to use task_pt_regs instead of its
own redundant code that does the same thing a different way.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This removes the handling for PTRACE_CONT et al from the 32-bit
ptrace code, so it uses the new generic code via ptrace_request.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This removes the handling for PTRACE_CONT et al from the 64-bit
ptrace code, so it uses the new generic code via ptrace_request.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This changes the single-step support to use a new thread_info flag
TIF_FORCED_TF instead of the PT_DTRACE flag in task_struct.ptrace.
This keeps arch implementation uses out of this non-arch field.
This changes the ptrace access to eflags to mask TF and maintain
the TIF_FORCED_TF flag directly if userland sets TF, instead of
relying on ptrace_signal_deliver. The 64-bit and 32-bit kernels
are harmonized on this same behavior. The ptrace_signal_deliver
approach works now, but this change makes the low-level register
access code reliable when called from different contexts than a
ptrace stop, which will be possible in the future.
The 64-bit do_debug exception handler is also changed not to clear TF
from user-mode registers. This matches the 32-bit kernel's behavior.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This removes the single-step code from ptrace_32.c and uses the step.c code
shared with the 64-bit kernel. The two versions of the code were nearly
identical already, so the shared code has only a couple of simple #ifdef's.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This fixes the 64-bit single-step handling code's instruction
decoder to grok the 0xf0 (lock) prefix, which the 32-bit code
already does correctly.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This cleans up the single-step code to use the asm/segment.h macros
for segment selector magic bits, rather than its own constant.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This moves the single-step support code from ptrace_64.c into a new file
step.c, verbatim. This paves the way for consolidating this code between
64-bit and 32-bit versions.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This defines the new standard arch_has_single_step macro. It makes the
existing set_singlestep and clear_singlestep entry points global, and
renames them to the new standard names user_enable_single_step and
user_disable_single_step, respectively.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This gets rid of the local constant macro TRAP_FLAG.
It's redundant with the public constant macro X86_EFLAGS_TF.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Actually, on 386, cmpxchg and cmpxchg_local fall back on
cmpxchg_386_u8/16/32: it disables interruptions around non atomic
updates to mimic the cmpxchg behavior.
The comment:
/* Poor man's cmpxchg for 386. Unsuitable for SMP */
already present in cmpxchg_386_u32 tells much about how this cmpxchg
implementation should not be used in a SMP context. However, the cmpxchg_local
can perfectly use this fallback, since it only needs to be atomic wrt the local
cpu.
This patch adds a cmpxchg_486_u64 and uses it as a fallback for cmpxchg64
and cmpxchg64_local on 80386 and 80486.
Q:
but why is it called cmpxchg_486 when the other functions are called
A:
Because the standard cmpxchg is missing only on 386, but cmpxchg8b is
missing both on 386 and 486.
Citing Intel's Instruction set reference:
cmpxchg:
This instruction is not supported on Intel processors earlier than the
Intel486 processors.
cmpxchg8b:
This instruction encoding is not supported on Intel processors earlier
than the Pentium processors.
Q:
What's the reason to have cmpxchg64_local on 32 bit architectures?
Without that need all this would just be a few simple defines.
A:
cmpxchg64_local on 32 bits architectures takes unsigned long long
parameters, but cmpxchg_local only takes longs. Since we have cmpxchg8b
to execute a 8 byte cmpxchg atomically on pentium and +, it makes sense
to provide a flavor of cmpxchg and cmpxchg_local using this instruction.
Also, for 32 bits architectures lacking the 64 bits atomic cmpxchg, it
makes sense _not_ to define cmpxchg64 while cmpxchg could still be
available.
Moreover, the fallback for cmpxchg8b on i386 for 386 and 486 is a
However, cmpxchg64_local will be emulated by disabling interrupts on all
architectures where it is not supported atomically.
Therefore, we *could* turn cmpxchg64_local into a cmpxchg_local, but it
would make the 386/486 fallbacks ugly, make its design different from
cmpxchg/cmpxchg64 (which really depends on atomic operations and cannot
be emulated) and require the __cmpxchg_local to be expressed as a macro
rather than an inline function so the parameters would not be fixed to
unsigned long long in every case.
So I think cmpxchg64_local makes sense there, but I am open to
suggestions.
Q:
Are there any callers?
A:
I am actually using it in LTTng in my timestamping code. I use it to
work around CPUs with asynchronous TSCs. I need to update 64 bits
values atomically on this 32 bits architecture.
Changelog:
- Ran though checkpatch.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The timer code always calls the clock_event_device set_net_event and
set_mode methods with interrupts disabled, so no need to use
spin_lock_irqsave / spin_unlock_irqrestore for those.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by:Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use sparsemem as the only memory model for UP, SMP and NUMA. Measurements
indicate that DISCONTIGMEM has a higher overhead than sparsemem. And
FLATMEMs benefits are minimal. So I think its best to simply standardize
on sparsemem.
Results of page allocator tests (test can be had via git from slab git
tree branch tests)
Measurements in cycle counts. 1000 allocations were performed and then the
average cycle count was calculated.
Order FlatMem Discontig SparseMem
0 639 665 641
1 567 647 593
2 679 774 692
3 763 967 781
4 961 1501 962
5 1356 2344 1392
6 2224 3982 2336
7 4869 7225 5074
8 12500 14048 12732
9 27926 28223 28165
10 58578 58714 58682
(Note that FlatMem is an SMP config and the rest NUMA configurations)
Memory use:
SMP Sparsemem
-------------
Kernel size:
text data bss dec hex filename
3849268 397739 1264856 5511863 541ab7 vmlinux
total used free shared buffers cached
Mem: 8242252 41164 8201088 0 352 11512
-/+ buffers/cache: 29300 8212952
Swap: 9775512 0 9775512
SMP Flatmem
-----------
Kernel size:
text data bss dec hex filename
3844612 397739 1264536 5506887 540747 vmlinux
So 4.5k growth in text size vs. FLATMEM.
total used free shared buffers cached
Mem: 8244052 40544 8203508 0 352 11484
-/+ buffers/cache: 28708 8215344
2k growth in overall memory use after boot.
NUMA discontig:
text data bss dec hex filename
3888124 470659 1276504 5635287 55fcd7 vmlinux
total used free shared buffers cached
Mem: 8256256 56908 8199348 0 352 11496
-/+ buffers/cache: 45060 8211196
Swap: 9775512 0 9775512
NUMA sparse:
text data bss dec hex filename
3896428 470659 1276824 5643911 561e87 vmlinux
8k text growth. Given that we fully inline virt_to_page and friends now
that is rather good.
total used free shared buffers cached
Mem: 8264720 57240 8207480 0 352 11516
-/+ buffers/cache: 45372 8219348
Swap: 9775512 0 9775512
The total available memory is increased by 8k.
This patch makes sparsemem the default and removes discontig and
flatmem support from x86.
[ akpm@linux-foundation.org: allnoconfig build fix ]
Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Remove repeated comment from the linker script for the x86-32 target.
Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In init/main.c boot_cpu_init() does that later.
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Cc: Zachary Amsden <zach@vmware.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Sanitize user specified e820 memory ranges, using the same logic that is
applied to the values returned by the BIOS. This ensures consistent
handling regardless of the source of the memory mappings.
Allows overriding portions of the memory map without specifying one in
it's entirety (memmap=exactmap).
E.g. marking a range of bad RAM as reserved with memmap=48M$528M
BIOS supplied range
BIOS-e820: 0000000000100000 - 000000007fe80000 (usable)
becomes
user: 0000000000100000 - 0000000021000000 (usable)
user: 0000000021000000 - 0000000024000000 (reserved)
user: 0000000024000000 - 000000007fe80000 (usable)
Previously this did not work, as the original BIOS range was left
untouched while the user defined range was appended to the end of the
memory map.
[ tglx: arch/x86 adaptation ]
Signed-off-by: Vladimir Berezniker <vmpn@hitechman.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This consolidates the four different places that implemented the same
encoding magic for the GDT-slot 32-bit TLS support. The old tls32.c was
renamed and is now only slightly modified to be the shared implementation.
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Zachary Amsden <zach@vmware.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This renames arch/x86/ia32/tls32.c to arch/x86/kernel/tls.c, which does
nothing now but paves the way to consolidate this code for 32-bit too.
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Zachary Amsden <zach@vmware.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The fs_base and gs_base fields are available in user_regs_struct.
But reading these via ptrace (PTRACE_GETREGS or PTRACE_PEEKUSR) does
not give a reliably useful value. The thread_struct fields are 0
when do_arch_prctl decided to use a GDT slot instead of MSR_FS_BASE,
which it does for a value under 1<<32.
This changes ptrace access to fs_base and gs_base to work like
PTRACE_ARCH_PRCTL does. That is, it reads the base address that
user-mode memory access using the fs/gs instruction prefixes will
use, regardless of how it's being implemented in the kernel. The
MSR vs GDT is an implementation detail that is pretty much hidden
from userland in the actual using, and there is no reason that
ptrace should give the internal implementation picture rather than
the user-mode semantic picture. In the case of setting the value,
this can implicitly change the fsindex/gsindex value (also
separately in user_regs_struct), which is what happens when the
thread calls arch_prctl itself. In a PTRACE_SETREGS, the fs_base
change will come after the fsindex change due to the order of the
struct, and so a change the debugger made to fs_base will have the
effect intended, another part of the user_regs_struct will now
differ when read back from what the debugger wrote.
This makes PTRACE_ARCH_PRCTL obsolete. We could consider declaring
it deprecated and removing it one day, though there is no hurry.
For the foreseeable future, debuggers have to assume an old kernel
that does not report reliable fs_base/gs_base values in user_regs_struct
and stick to PTRACE_ARCH_PRCTL anyway.
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This changes a couple of places to use the get_desc_base function.
They were duplicating the same calculation with different equivalent code.
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This changes the 64-bit kernel's support for the 32-bit sysenter
instruction to use stored fields rather than constants for the
user-mode return address, as the 32-bit kernel does. This adds a
sysenter_return field to struct thread_info, as 32-bit has. There
is no observable effect from this yet. It makes the assembly code
independent of the 32-bit vDSO mapping address, paving the way for
making the vDSO address vary as it does on the 32-bit kernel.
[ akpm@linux-foundation.org: build fix on !CONFIG_IA32_EMULATION ]
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This harmonizes the name for the entry point from the 32-bit sysenter
instruction across 32-bit and 64-bit kernels.
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This moves arch/x86/kernel/sysenter_32.c to arch/x86/vdso/vdso32-setup.c,
keeping all the code relating only to vDSO magic in the vdso/ subdirectory.
This is a pure renaming, but it paves the way to consolidating the code for
dealing with 32-bit vDSOs across CONFIG_X86_32 and CONFIG_IA32_EMULATION.
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This makes the i386 kernel use the new vDSO build in arch/x86/vdso/vdso32/
to replace the old one from arch/x86/kernel/.
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This moves the i386 vDSO sources into arch/x86/vdso/vdso32/, a
new directory. This patch is a pure renaming, but paves the way
for consolidating the vDSO build logic.
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This change harmonizes the asm-offsets macros used in the 32-bit vDSO
across 32-bit and 64-bit builds. It's a purely cosmetic change for now,
but it paves the way for consolidating the 32-bit vDSO builds.
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Randomize the location of the heap (brk) for i386 and x86_64. The range is
randomized in the range starting at current brk location up to 0x02000000
offset for both architectures. This, together with
pie-executable-randomization.patch and
pie-executable-randomization-fix.patch, should make the address space
randomization on i386 and x86_64 complete.
Arjan says:
This is known to break older versions of some emacs variants, whose dumper
code assumed that the last variable declared in the program is equal to the
start of the dynamically allocated memory region.
(The dumper is the code where emacs effectively dumps core at the end of it's
compilation stage; this coredump is then loaded as the main program during
normal use)
iirc this was 5 years or so; we found this way back when I was at RH and we
first did the security stuff there (including this brk randomization). It
wasn't all variants of emacs, and it got fixed as a result (I vaguely remember
that emacs already had code to deal with it for other archs/oses, just
ifdeffed wrongly).
It's a rare and wrong assumption as a general thing, just on x86 it mostly
happened to be true (but to be honest, it'll break too if gcc does
something fancy or if the linker does a non-standard order). Still its
something we should at least document.
Note 2: afaik it only broke the emacs *build*. I'm not 100% sure about that
(it IS 5 years ago) though.
[ akpm@linux-foundation.org: deuglification ]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Earlier patch added IO APIC setup into local APIC setup. This caused
modpost warnings. Fix them by untangling setup_local_APIC() and splitting
it into smaller functions. The IO APIC initialization is only called
for the BP init.
Also removed some outdated debugging code and minor cleanup.
[ tglx: arch/x86 adaptation ]
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We need to store core id bits to cpuinfo_x86 in early_identify_cpu. So we
use it to create acpiid_to_node array in k8topolgy.c
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
4 socket quad core, 8 socket quad core will do apic ID lifting for BSP.
But io-apic regs for ExtINT still use 0 as dest.
so when we enable apic error vector in BSP, we will get one APIC error.
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/4 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
enabled ExtINT on CPU#0
ESR value after enabling vector: 00000000, after 0000000c
APIC error on CPU0: 0c(08)
ENABLING IO-APIC IRQs
Synchronizing Arb IDs.
So move enable_IO_APIC from setup_IO_APIC into setup_local_APIC and call it
before enabling the ACPI error vector.
[ tglx: arch/x86 adaptation ]
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
So this patch simply removes the "thread" from asm-offsets.c since I
can't find an owner for it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Bring the mpspec variants into sync to prepare merging and
paravirt support.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Bring the tlbflush.h variants into sync to prepare merging and
paravirt support.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch consolidates the irqflags include files containing common
paravirt definitions. The native definition for interrupt handling, halt,
and such, are the same for 32 and 64 bit, and they are kept in irqflags.h.
the differences are split in the arch-specific files.
The syscall function, irq_enable_sysexit, has a very specific i386 naming,
and its name is then changed to a more general one.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
clean up and make nmi_32/64.c more similar.
- white space and coding style clean up.
- nmi_cpu_busy is available on CONFIG_SMP.
- move functions __acpi_nmi_enable, acpi_nmi_enable,
__acpi_nmi_disable and acpi_nmi_disable.
- make variables name more similar.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch removes the extern struct resource declarations for
data_resource, code_resource and bss_resource on x86 and declares that
three structures as static as done on other architectures like IA64.
On i386, these structures are moved to setup_32.c (from e820_32.c) because
that's code that is not specific to e820 and also required on EFI systems.
That makes the "extern" reference superfluous.
On x86_64, data_resource, code_resource and bss_resource are passed to
e820_reserve_resources() as arguments just as done on i386 and IA64. That
also avoids the "extern" reference and it's possible to make it static.
Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Lucas Woods <woodzy@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This is a janitorish patch to 1) remove private TRUE/FALSE #def's in
favor of using the standard enum from linux/stddef.h and 2) switch the
variables holding those values to type 'bool' (from linux/types.h)
since it both seems more appropriate and allows for potentially better
optimization.
As a truly minor aside, I removed a couple of comments documenting
a 'do_safe' parameter that seems to no longer exist.
Signed-off-by: Paul Jimenez <pj@place.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch contains the following cleanups:
- make the needlessly global iommu_setup() static
- remove the unused EXPORT_SYMBOL(iommu_merge)
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
"debugging" is a horrible name for a global variable - thankfully it can
become static.
Also put it out of __read_mostly so that gcc no longer has to emit it
at all.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch makes the following needlessly global code static:
- panic_on_timeout
- setup_nmi_watchdog()
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch makes the needlessly global struct mcelog static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch makes the following needlessly global functions static:
- e820_print_map()
- early_panic()
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Howdy! Here's a simple janitorish patch for you:
This patch mainly hinges around two includes and their ramifications:
#include <i8259.h> which provides cached_{slave,master}_mask
#include <io_ports.h> which provides PIC_{MASTER,SLAVE}_{IMR,CMD}
Adding these two includes and using those half dozen or so definitions
removed 140+ lines of diffs between i8259_32.c and i8259_64.c, thus
making it easier for the real substantitive differences between them to
show up, and hopefully therefore making it easier to eventually merge
the two. All the warnings that checkpatch.pl throws (missing spaces
after commas and >80 character lines) exist intentionally to match
i8259_32.c.
Signed-off-by: Paul Jimenez <pj@place.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch removes the unused exports for __{read,write}_lock_failed.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The exports are nowhere used. There is even no reason why they were
ever introduced.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove the rtc code from time_64.c and add the extra bits to the
i386 path. The ACPI century check is probably valid for i386 as
well, but this is material for a separate patch.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The mach-default/mach_time.h code inline is moved to arch/x86/kernel/rtc.c
and the header files are adjusted.
Shrink the 3 dozen includes to the ones we really need.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Unify mc146818rtc.h by adding the rtc_cmos_read/write functions to
time_64.c. This is a preparatory patch to finaly share the rtc code,
which is unsurprisingly similar.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove unused variables, rename the "unused" argument to regp. It is used !
Codingstyle fixes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Simplify set_bitmap(). This is not in a hotpath and we really can use the
straight forward loop through those bits. A similar implementation is used
in the 64 bit code as well.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Match i386, where we have this in the irq code. It belongs there.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The commit 399287229c hacked the
ioapic resource mapping into apic.c for no good reason.
Move the code into io_apic_64.c where it belongs.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
start_kernel is already declared in a generic header file.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move the mce related declarations where they belong, fix the
users and remove 32bit dependency in mce.h
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move acpi/pci related declarations to the correct headers
and remove the duplicate.
Build fix from: Andrew Morton
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use u32 so 32 and 64bit have the same interface.
Andrew Morton: xen, lguest build fixes
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
White space and coding style cleanups.
Change unsigned to int. There is no win when we compare mincount against pc->size,
which is an int as well. Casting pc->size to unsigned just might hide real problems.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Create a ldt write accessor like the 32 bit one.
Preparatory patch for merging ldt.c and anyway necessary for
64bit paravirt ops.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
do a proper idle-wakeup event on HLT as well - some CPUs stop the TSC
in HLT too, not just when going through the ACPI methods.
(the ACPI idle code already does this.)
[ update the 64-bit side too, as noticed by Jiri Slaby. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
scale the sched_clock() cyc_2_nsec scaling factor according to
CPU frequency changes.
[ mingo@elte.hu: simplified it and fixed it for SMP. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
cf http://lkml.org/lkml/2007/10/3/41
To summarize: on Linux, SA_ONSTACK decides whether you are already on the
signal stack based on the value of the SP at the time of a signal. If
you are not already inside the range, you are not "on the signal stack"
and so the new signal handler frame starts over at the base of the signal
stack.
sigaltstack (and sigstack before it) was invented in BSD. There, the
SA_ONSTACK behavior has always been different. It uses a kernel state
flag to decide, rather than the SP value. When you first take an
SA_ONSTACK signal and switch to the alternate signal stack, it sets the
SS_ONSTACK flag in the thread's sigaltstack state in the kernel.
Thereafter you are "on the signal stack" and don't switch SP before
pushing a handler frame no matter what the SP value is. Only when you
sigreturn from the original handler context do you clear the SS_ONSTACK
flag so that a new handler frame will start over at the base of the
alternate signal stack.
The undesireable effect of the Linux behavior is that an overflow of the
alternate signal stack can not only go undetected, but lead to a ring
buffer effect of clobbering the original handler frame at the base of the
signal stack for each successive signal that comes just after the
overflow. This is what Shi Weihua's test case demonstrates. Normally
this does not come up because of the signal mask, but the test case uses
SA_NODEFER for its SIGSEGV handler.
The other subtle part of the existing Linux semantics is that a simple
longjmp out of a signal handler serves to take you off the signal stack
in a safe and reliable fashion without having used sigreturn (nor having
just returned from the handler normally, which means the same). After
the longjmp (or even informal stack switching not via any proper libc or
kernel interface), the alternate signal stack stands ready to be used
again.
A paranoid program would allocate a PROT_NONE red zone around its
alternate signal stack. Then a small overflow would trigger a SIGSEGV in
handler setup, and be fatal (core dump) whether or not SIGSEGV is
blocked. As with thread stack red zones, that cannot catch all overflows
(or underflows). e.g., a local array as large as page size allocated in
a function called from a handler, but not actually touched before more
calls push more stack, could cause an overflow that silently pushes into
some unrelated allocated pages.
The BSD behavior does not do anything in particular about overflow. But
it does at least avoid the wraparound or "ring buffer effect", so you'll
just get a straightforward all-out overflow down your address space past
the low end of the alternate signal stack. I don't know what the BSD
behavior is for longjmp out of an SA_ONSTACK handler.
The POSIX wording relating to sigaltstack is pretty minimal. I don't
think it speaks to this issue one way or another. (The program that
overflows its stack is clearly in undefined behavior territory of one
sort or another anyhow.)
Given the longjmp issue and the potential for highly subtle complications
in existing programs relying on this in arcane ways deep in their code, I
am very dubious about changing the behavior to the BSD style persistent
flag. I think Shi Weihua's patches have a similar effect by tracking the
SP used in the last handler setup.
I think it would be sensible for the signal handler setup code to detect
when it would itself be causing a stack overflow. Maybe something like
the following patch (untested). This issue exists in the same way on all
machines, so ideally they would all do a similar check.
When it's the handler function itself or its callees that cause the
overflow, rather than the signal handler frame setup alone crossing the
boundary, this still won't help. But I don't see any way to distinguish
that from the valid longjmp case.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
add the DMI strings provided by Islam Amer <pharon@gmail.com>, for
the Compaq Presario V6000 (Quanta/30B7).
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
various changes to the in_p/out_p delay details:
- add the io_delay=none method
- make each method selectable from the kernel config
- simplify the delay code a bit by getting rid of an indirect function call
- add the /proc/sys/kernel/io_delay_type sysctl
- change 'io_delay=standard|alternate' to io_delay=0x80 and io_delay=0xed
- make the io delay config not depend on CONFIG_DEBUG_KERNEL
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: "David P. Reed" <dpreed@reed.com>
x86: provide a DMI based port 0x80 I/O delay override.
Certain (HP) laptops experience trouble from our port 0x80 I/O delay
writes. This patch provides for a DMI based switch to the "alternate
diagnostic port" 0xed (as used by some BIOSes as well) for these.
David P. Reed confirmed that port 0xed works for him and provides a
proper delay. The symptoms of _not_ working are a hanging machine,
with "hwclock" use being a direct trigger.
Earlier versions of this attempted to simply use udelay(2), with the
2 being a value tested to be a nicely conservative upper-bound with
help from many on the linux-kernel mailinglist but that approach has
two problems.
First, pre-loops_per_jiffy calibration (which is post PIT init while
some implementations of the PIT are actually one of the historically
problematic devices that need the delay) udelay() isn't particularly
well-defined. We could initialise loops_per_jiffy conservatively (and
based on CPU family so as to not unduly delay old machines) which
would sort of work, but...
Second, delaying isn't the only effect that a write to port 0x80 has.
It's also a PCI posting barrier which some devices may be explicitly
or implicitly relying on. Alan Cox did a survey and found evidence
that additionally some drivers may be racy on SMP without the bus
locking outb.
Switching to an inb() makes the timing too unpredictable and as such,
this DMI based switch should be the safest approach for now. Any more
invasive changes should get more rigid testing first. It's moreover
only very few machines with the problem and a DMI based hack seems
to fit that situation.
This also introduces a command-line parameter "io_delay" to override
the DMI based choice again:
io_delay=<standard|alternate>
where "standard" means using the standard port 0x80 and "alternate"
port 0xed.
This retains the udelay method as a config (CONFIG_UDELAY_IO_DELAY) and
command-line ("io_delay=udelay") choice for testing purposes as well.
This does not change the io_delay() in the boot code which is using
the same port 0x80 I/O delay but those do not appear to be a problem
as David P. Reed reported the problem was already gone after using the
udelay version. He moreover reported that booting with "acpi=off" also
fixed things and seeing as how ACPI isn't touched until after this DMI
based I/O port switch I believe it's safe to leave the ones in the boot
code be.
The DMI strings from David's HP Pavilion dv9000z are in there already
and we need to get/verify the DMI info from other machines with the
problem, notably the HP Pavilion dv6000z.
This patch is partly based on earlier patches from Pavel Machek and
David P. Reed.
Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Document the fact that __save_processor_state() has to save all CPU
registers referred to by the kernel in case a different kernel is
used to load and restore a hibernation image containing it.
Sigend-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Looks like IRQ 31 is assigned to timer 3, even without the patch!
I wonder who wrote the number 31. But the manual says that it is
zero by default.
I think we should check whether the timer has been allocated an IRQ before
proceeding to assign one to it. Here is a patch that does this.
Signed-off-by: Balaji Rao <balajirrao@gmail.com>
Tested-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The userspace API for the HPET (see Documentation/hpet.txt) did not work. The
HPET_IE_ON ioctl was failing as there was no IRQ assigned to the timer
device. This patch fixes it by allocating IRQs to timer blocks in the HPET.
arch/x86/kernel/hpet.c | 13 +++++--------
drivers/char/hpet.c | 45 ++++++++++++++++++++++++++++++++++++++-------
include/linux/hpet.h | 2 +-
3 files changed, 44 insertions(+), 16 deletions(-)
Signed-off-by: Balaji Rao <balajirrao@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The following scenario might leave PIT as a disfunctional clock source:
PIT is registered as clocksource
PM_TIMER is registered as clocksource and enables highres/dyntick mode
PIT is switched to oneshot mode
-> now the readout of PIT is bogus, but the user might select PIT
via the sysfs override, which would break the box as the time
readout is unusable.
Unregister the PIT clocksource when the PIT clock event device is switched
into shutdown / oneshot mode.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On x86 the PIT might become an unusable clocksource. Add an unregister
function to provide a possibilty to remove the PIT from the list of
available clock sources.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
PIT clocksource is registered unconditionally even when HPET is enabled
or when PIT is replaced by the local APIC timer. In both cases PIT can
not be used as it is stopped and the readout would be stale.
Prevent registering PIT in those cases.
patch depends on:
x86: offer is_hpet_enabled() on !CONFIG_HPET_TIMER too
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
I was confused by FSEC = 10^15 NSEC statement, plus small whitespace
fixes. When there's copyright, there should be GPL.
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
the logic in this function is just crazy. It's recursive, but we
can circumvent the creation for the kobject and whole creation of the
threshold_block if some conditions are met. That's why we see the
allocate_threshold_blocks so many times in the callstack, yet only a few
kobjects created.
Then we blow up in kobject_uevent_env() on the first debug printk.
Which means that we are just passing in garbage.
Man, this is one time that comments in code would have been very nice to
have, and why forward goto's into major code blocks are just evil...
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch consolidate all definitions of .init.text, .init.data
and .exit.text, .exit.data section definitions in
the generic vmlinux.lds.h.
This is a preparational patch - alone it does not buy
us much good.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
