We can skip the initial trylock in rwsem_down_write_failed() if there
are known active lockers already, thus saving one likely-to-fail
cmpxchg.
Signed-off-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In rwsem_down_write_failed(), if there are active locks after we wake up
(i.e. the lock got stolen from us), skip taking the wait_lock and go
back to sleep immediately.
Signed-off-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using rwsem_atomic_update to try stealing the write lock forced us to
undo the adjustment in the failure path. We can have simpler and faster
code by using cmpxchg instead.
Signed-off-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some small code simplifications can be achieved by doing more agressive
lock stealing:
- When rwsem_down_write_failed() notices that there are no active locks
(and thus no thread to wake us if we decided to sleep), it used to wake
the first queued process. However, stealing the lock is also sufficient
to deal with this case, so we don't need this check anymore.
- In try_get_writer_sem(), we can steal the lock even when the first waiter
is a reader. This is correct because the code path that wakes readers is
protected by the wait_lock. As to the performance effects of this change,
they are expected to be minimal: readers are still granted the lock
(rather than having to acquire it themselves) when they reach the front
of the wait queue, so we have essentially the same behavior as in
rwsem-spinlock.
Signed-off-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When waking writers, we never grant them the lock - instead, they have
to acquire it themselves when they run, and remove themselves from the
wait_list when they succeed.
As a result, we can do a few simplifications in rwsem_down_write_failed():
- We don't need to check for !waiter.task since __rwsem_do_wake() doesn't
remove writers from the wait_list
- There is no point releaseing the wait_lock before entering the wait loop,
as we will need to reacquire it immediately. We can change the loop so
that the lock is always held at the start of each loop iteration.
- We don't need to get a reference on the task structure, since the task
is responsible for removing itself from the wait_list. There is no risk,
like in the rwsem_down_read_failed() case, that a task would wake up and
exit (thus destroying its task structure) while __rwsem_do_wake() is
still running - wait_lock protects against that.
Signed-off-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When trying to acquire a read lock, the RWSEM_ACTIVE_READ_BIAS
adjustment doesn't cause other readers to block, so we never have to
worry about waking them back after canceling this adjustment in
rwsem_down_read_failed().
We also never want to steal the lock in rwsem_down_read_failed(), so we
don't have to grab the wait_lock either.
Signed-off-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the rwsem_down_failed_common function and replace it with two
identical copies of its code in rwsem_down_{read,write}_failed.
This is because we want to make different optimizations in
rwsem_down_{read,write}_failed; we are adding this pure-duplication
step as a separate commit in order to make it easier to check the
following steps.
Signed-off-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This change reduces the size of the spinlocked and TASK_UNINTERRUPTIBLE
sections in rwsem_down_failed_common():
- We only need the sem->wait_lock to insert ourselves on the wait_list;
the waiter node can be prepared outside of the wait_lock.
- The task state only needs to be set to TASK_UNINTERRUPTIBLE immediately
before checking if we actually need to sleep; it doesn't need to protect
the entire function.
Signed-off-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We are not planning to add some new waiter flags, so we can convert the
waiter type into an enumeration.
Background: David Howells suggested I do this back when I tried adding
a new waiter type for unfair readers. However, I believe the cleanup
applies regardless of that use case.
Signed-off-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 5a505085f0 ("mm/rmap: Convert the struct anon_vma::mutex
to an rwsem") changed struct anon_vma::mutex to an rwsem, which
caused aim7 fork_test performance to drop by 50%.
Yuanhan Liu did the following excellent analysis:
https://lkml.org/lkml/2013/1/29/84
and found that the regression is caused by strict, serialized,
FIFO sequential write-ownership of rwsems. Ingo suggested
implementing opportunistic lock-stealing for the front writer
task in the waitqueue.
Yuanhan Liu implemented lock-stealing for spinlock-rwsems,
which indeed recovered much of the regression - confirming
the analysis that the main factor in the regression was the
FIFO writer-fairness of rwsems.
In this patch we allow lock-stealing to happen when the first
waiter is also writer. With that change in place the
aim7 fork_test performance is fully recovered on my
Intel NHM EP, NHM EX, SNB EP 2S and 4S test-machines.
Reported-by: lkp@linux.intel.com
Reported-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Alex Shi <alex.shi@intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Anton Blanchard <anton@samba.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: paul.gortmaker@windriver.com
Link: https://lkml.org/lkml/2013/1/29/84
Link: http://lkml.kernel.org/r/1360069915-31619-1-git-send-email-alex.shi@intel.com
[ Small stylistic fixes, updated changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For files only using THIS_MODULE and/or EXPORT_SYMBOL, map
them onto including export.h -- or if the file isn't even
using those, then just delete the include. Fix up any implicit
include dependencies that were being masked by module.h along
the way.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
There is no reason to allow the lock protecting rwsems (the
ownerless variant) to be preemptible on -rt. Convert it to raw.
In mainline this change documents the low level nature of
the lock - otherwise there's no functional difference. Lockdep
and Sparse checking will work as usual.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra pointed out, that the only user of asmregparm (x86) is
compiling the kernel already with -mregparm=3. So the annotation of
the rwsem functions is redundant. Remove it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David Miller <davem@davemloft.net>
Cc: Chris Zankel <chris@zankel.net>
LKML-Reference: <alpine.LFD.2.00.1101262130450.31804@localhost6.localdomain6>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
More code can be pushed from rwsem_down_read_failed and
rwsem_down_write_failed into rwsem_down_failed_common.
Following change adding down_read_critical infrastructure support also
enjoys having flags available in a register rather than having to fish it
out in the struct rwsem_waiter...
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Mike Waychison <mikew@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This change addresses the following situation:
- Thread A acquires the rwsem for read
- Thread B tries to acquire the rwsem for write, notices there is already
an active owner for the rwsem.
- Thread C tries to acquire the rwsem for read, notices that thread B already
tried to acquire it.
- Thread C grabs the spinlock and queues itself on the wait queue.
- Thread B grabs the spinlock and queues itself behind C. At this point A is
the only remaining active owner on the rwsem.
In this situation thread B could notice that it was the last active writer
on the rwsem, and decide to wake C to let it proceed in parallel with A
since they both only want the rwsem for read.
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Mike Waychison <mikew@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Previously each waiting thread added a bias of RWSEM_WAITING_BIAS. With
this change, the bias is added only once to indicate that the wait list is
non-empty.
This has a few nice properties which will be used in following changes:
- when the spinlock is held and the waiter list is known to be non-empty,
count < RWSEM_WAITING_BIAS <=> there is an active writer on that sem
- count == RWSEM_WAITING_BIAS <=> there are waiting threads and no
active readers/writers on that sem
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Mike Waychison <mikew@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In __rwsem_do_wake(), we can skip the active count check unless we come
there from up_xxxx(). Also when checking the active count, it is not
actually necessary to increment it; this allows us to get rid of the read
side undo code and simplify the calculation of the final rwsem count
adjustment once we've counted the reader threads to wake.
The basic observation is the following. When there are waiter threads on
a rwsem and the spinlock is held, other threads can only increment the
active count by trying to grab the rwsem in down_xxxx(). However
down_xxxx() will notice there are waiter threads and take the down_failed
path, blocking to acquire the spinlock on the way there. Therefore, a
thread observing an active count of zero with waiters queued and the
spinlock held, is protected against other threads acquiring the rwsem
until it wakes the last waiter or releases the spinlock.
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Mike Waychison <mikew@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is in preparation for later changes in the series.
In __rwsem_do_wake(), the first queued waiter is checked first in order to
determine whether it's a writer or a reader. The code paths diverge at
this point. The code that checks and increments the rwsem active count is
duplicated on both sides - the point is that later changes in the series
will be able to independently modify both sides.
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Mike Waychison <mikew@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If there are no active threasd using a semaphore, it is always correct
to unqueue blocked threads. This seems to be what was intended in the
undo code.
What was done instead, was to look for a sem count of zero - this is an
impossible situation, given that at least one thread is known to be
queued on the semaphore. The code might be correct as written, but it's
hard to reason about and it's not what was intended (otherwise the goto
out would have been unconditional).
Go for checking the active count - the alternative is not worth the
headache.
Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
introduce the "asmregparm" calling convention: for functions
implemented in assembly with a fixed regparm input parameters
calling convention.
mark the semaphore and rwsem slowpath functions with that.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This following commit
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=fdf8cb0909b531f9ae8f9b9d7e4eb35ba3505f07
un-inlined a low-level rwsem function, but did not mark it as __sched.
The result is that it now shows up as thread wchan (which also affects
/proc/profile stats). The following simple patch fixes this by properly
marking rwsem_down_failed_common() as a __sched function.
Also in this patch, which is up for discussion, marks down_read() and
down_write() proper as __sched. For profiling, it is pretty much
useless to know that a semaphore is beig help - it is necessary to know
_which_ one. By going up another frame on the stack, the information
becomes much more useful.
In summary, the below change to lib/rwsem.c should be applied; the
changes to kernel/rwsem.c could be applied if other kernel hackers agree
with my proposal that down_read()/down_write() in the profile is not
enough.
[ akpm@linux-foundation.org: build fix ]
Signed-off-by: Livio Soares <livio@eecg.toronto.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This annotation makes it possible to assign a subclass on lock init. This
annotation is meant to reduce the _nested() annotations by assigning a
default subclass.
One could do without this annotation and rely on lockdep_set_class()
exclusively, but that would require a manual stack of struct lock_class_key
objects.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Un-inlining rwsem_down_failed_common() (two callsites) reduced lib/rwsem.o
on my Athlon, gcc 4.1.2 from 5935 to 5480 Bytes (455 Bytes saved).
I thus guess that reduced icache footprint (and better function caching) is
worth more than any function call overhead.
Signed-off-by: Andreas Mohr <andi@lisas.de>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Use the lock validator framework to prove rwsem locking correctness.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Replace a number of memory barriers with smp_ variants. This means we won't
take the unnecessary hit on UP machines.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
