The virtual MPIDR registers (containing topology information) for the
guest are currently mapped linearily to the vcpu_id. Improve this
mapping for arm64 by using three levels to not artificially limit the
number of vCPUs.
To help this, change and rename the kvm_vcpu_get_mpidr() function to
mask off the non-affinity bits in the MPIDR register.
Also add an accessor to later allow easier access to a vCPU with a
given MPIDR. Use this new accessor in the PSCI emulation.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
When a vcpu calls SYSTEM_OFF or SYSTEM_RESET with PSCI v0.2, the vcpus
should really be turned off for the VM adhering to the suggestions in
the PSCI spec, and it's the sane thing to do.
Also, clarify the behavior and expectations for exits to user space with
the KVM_EXIT_SYSTEM_EVENT case.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
This patch adds emulation of PSCI v0.2 CPU_SUSPEND function call for
KVM ARM/ARM64. This is a CPU-level function call which can suspend
current CPU or current CPU cluster. We don't have VCPU clusters in
KVM so we only suspend the current VCPU.
The CPU_SUSPEND emulation is not tested much because currently there
is no CPUIDLE driver in Linux kernel that uses PSCI CPU_SUSPEND. The
PSCI CPU_SUSPEND implementation in ARM64 kernel was tested using a
Simple CPUIDLE driver which is not published due to unstable DT-bindings
for PSCI.
(For more info, http://lwn.net/Articles/574950/)
For simplicity, we implement CPU_SUSPEND emulation similar to WFI
(Wait-for-interrupt) emulation and we also treat power-down request
to be same as stand-by request. This is consistent with section
5.4.1 and section 5.4.2 of PSCI v0.2 specification.
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
As-per PSCI v0.2, the source CPU provides physical address of
"entry point" and "context id" for starting a target CPU. Also,
if target CPU is already running then we should return ALREADY_ON.
Current emulation of CPU_ON function does not consider physical
address of "context id" and returns INVALID_PARAMETERS if target
CPU is already running.
This patch updates kvm_psci_vcpu_on() such that it works for both
PSCI v0.1 and PSCI v0.2.
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
This patch adds emulation of PSCI v0.2 MIGRATE, MIGRATE_INFO_TYPE, and
MIGRATE_INFO_UP_CPU function calls for KVM ARM/ARM64.
KVM ARM/ARM64 being a hypervisor (and not a Trusted OS), we cannot provide
this functions hence we emulate these functions in following way:
1. MIGRATE - Returns "Not Supported"
2. MIGRATE_INFO_TYPE - Return 2 i.e. Trusted OS is not present
3. MIGRATE_INFO_UP_CPU - Returns "Not Supported"
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
This patch adds emulation of PSCI v0.2 AFFINITY_INFO function call
for KVM ARM/ARM64. This is a VCPU-level function call which will be
used to determine current state of given affinity level.
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
The PSCI v0.2 SYSTEM_OFF and SYSTEM_RESET functions are system-level
functions hence cannot be fully emulated by in-kernel PSCI emulation code.
To tackle this, we forward PSCI v0.2 SYSTEM_OFF and SYSTEM_RESET function
calls from vcpu to user space (i.e. QEMU or KVMTOOL) via kvm_run structure
using KVM_EXIT_SYSTEM_EVENT exit reasons.
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Currently, the kvm_psci_call() returns 'true' or 'false' based on whether
the PSCI function call was handled successfully or not. This does not help
us emulate system-level PSCI functions where the actual emulation work will
be done by user space (QEMU or KVMTOOL). Examples of such system-level PSCI
functions are: PSCI v0.2 SYSTEM_OFF and SYSTEM_RESET.
This patch updates kvm_psci_call() to return three types of values:
1) > 0 (success)
2) = 0 (success but exit to user space)
3) < 0 (errors)
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Currently, the in-kernel PSCI emulation provides PSCI v0.1 interface to
VCPUs. This patch extends current in-kernel PSCI emulation to provide
PSCI v0.2 interface to VCPUs.
By default, ARM/ARM64 KVM will always provide PSCI v0.1 interface for
keeping the ABI backward-compatible.
To select PSCI v0.2 interface for VCPUs, the user space (i.e. QEMU or
KVMTOOL) will have to set KVM_ARM_VCPU_PSCI_0_2 feature when doing VCPU
init using KVM_ARM_VCPU_INIT ioctl.
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
The current KVM implementation of PSCI returns INVALID_PARAMETERS if the
waitqueue for the corresponding CPU is not active. This does not seem
correct, since KVM should not care what the specific thread is doing,
for example, user space may not have called KVM_RUN on this VCPU yet or
the thread may be busy looping to user space because it received a
signal; this is really up to the user space implementation. Instead we
should check specifically that the CPU is marked as being turned off,
regardless of the VCPU thread state, and if it is, we shall
simply clear the pause flag on the CPU and wake up the thread if it
happens to be blocked for us.
Further, the implementation seems to be racy when executing multiple
VCPU threads. There really isn't a reasonable user space programming
scheme to ensure all secondary CPUs have reached kvm_vcpu_first_run_init
before turning on the boot CPU.
Therefore, set the pause flag on the vcpu at VCPU init time (which can
reasonably be expected to be completed for all CPUs by user space before
running any VCPUs) and clear both this flag and the feature (in case the
feature can somehow get set again in the future) and ping the waitqueue
on turning on a VCPU using PSCI.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
- A couple a basic fixes for running BE guests on a LE host
- A performance improvement for overcommitted VMs (same as the equivalent
patch for ARM)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=s0ny
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm64/for-3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into kvm-next
A handful of fixes for KVM/arm64:
- A couple a basic fixes for running BE guests on a LE host
- A performance improvement for overcommitted VMs (same as the equivalent
patch for ARM)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Conflicts:
arch/arm/include/asm/kvm_emulate.h
arch/arm64/include/asm/kvm_emulate.h
When booting a vcpu using PSCI, make sure we start it with the
endianness of the caller. Otherwise, secondaries can be pretty
unhappy to execute a BE kernel in LE mode...
This conforms to PSCI spec Rev B, 5.13.3.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The KVM PSCI code blindly assumes that vcpu_id and MPIDR are
the same thing. This is true when vcpus are organized as a flat
topology, but is wrong when trying to emulate any other topology
(such as A15 clusters).
Change the KVM PSCI CPU_ON code to look at the MPIDR instead
of the vcpu_id to pick a target CPU.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Currently, kvmtool unconditionally declares that HVC should be used
to call PSCI, so the function numbers in the DT tell the guest
nothing about the function ID namespace or calling convention for
SMC.
We already assume that the guest will examine and honour the DT,
since there is no way it could possibly guess the KVM-specific PSCI
function IDs otherwise. So let's not encourage guests to violate
what's specified in the DT by using SMC to make the call.
[ Modified to apply to top of kvm/arm tree - Christoffer ]
Signed-off-by: Dave P Martin <Dave.Martin@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
Implement the PSCI specification (ARM DEN 0022A) to control
virtual CPUs being "powered" on or off.
PSCI/KVM is detected using the KVM_CAP_ARM_PSCI capability.
A virtual CPU can now be initialized in a "powered off" state,
using the KVM_ARM_VCPU_POWER_OFF feature flag.
The guest can use either SMC or HVC to execute a PSCI function.
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
