Commit graph

1550 commits

Author SHA1 Message Date
Linus Torvalds
a0e881b7c1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull second vfs pile from Al Viro:
 "The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the
  deadlock reproduced by xfstests 068), symlink and hardlink restriction
  patches, plus assorted cleanups and fixes.

  Note that another fsfreeze deadlock (emergency thaw one) is *not*
  dealt with - the series by Fernando conflicts a lot with Jan's, breaks
  userland ABI (FIFREEZE semantics gets changed) and trades the deadlock
  for massive vfsmount leak; this is going to be handled next cycle.
  There probably will be another pull request, but that stuff won't be
  in it."

Fix up trivial conflicts due to unrelated changes next to each other in
drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c}

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits)
  delousing target_core_file a bit
  Documentation: Correct s_umount state for freeze_fs/unfreeze_fs
  fs: Remove old freezing mechanism
  ext2: Implement freezing
  btrfs: Convert to new freezing mechanism
  nilfs2: Convert to new freezing mechanism
  ntfs: Convert to new freezing mechanism
  fuse: Convert to new freezing mechanism
  gfs2: Convert to new freezing mechanism
  ocfs2: Convert to new freezing mechanism
  xfs: Convert to new freezing code
  ext4: Convert to new freezing mechanism
  fs: Protect write paths by sb_start_write - sb_end_write
  fs: Skip atime update on frozen filesystem
  fs: Add freezing handling to mnt_want_write() / mnt_drop_write()
  fs: Improve filesystem freezing handling
  switch the protection of percpu_counter list to spinlock
  nfsd: Push mnt_want_write() outside of i_mutex
  btrfs: Push mnt_want_write() outside of i_mutex
  fat: Push mnt_want_write() outside of i_mutex
  ...
2012-08-01 10:26:23 -07:00
Minchan Kim
ee6f509c32 mm: factor out memory isolate functions
mm/page_alloc.c has some memory isolation functions but they are used only
when we enable CONFIG_{CMA|MEMORY_HOTPLUG|MEMORY_FAILURE}.  So let's make
it configurable by new CONFIG_MEMORY_ISOLATION so that it can reduce
binary size and we can check it simple by CONFIG_MEMORY_ISOLATION, not if
defined CONFIG_{CMA|MEMORY_HOTPLUG|MEMORY_FAILURE}.

Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:45 -07:00
Linus Torvalds
6f51f51582 Merge branch 'for-linus-for-3.6-rc1' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping
Pull DMA-mapping updates from Marek Szyprowski:
 "Those patches are continuation of my earlier work.

  They contains extensions to DMA-mapping framework to remove limitation
  of the current ARM implementation (like limited total size of DMA
  coherent/write combine buffers), improve performance of buffer sharing
  between devices (attributes to skip cpu cache operations or creation
  of additional kernel mapping for some specific use cases) as well as
  some unification of the common code for dma_mmap_attrs() and
  dma_mmap_coherent() functions.  All extensions have been implemented
  and tested for ARM architecture."

* 'for-linus-for-3.6-rc1' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: dma-mapping: add support for DMA_ATTR_SKIP_CPU_SYNC attribute
  common: DMA-mapping: add DMA_ATTR_SKIP_CPU_SYNC attribute
  ARM: dma-mapping: add support for dma_get_sgtable()
  common: dma-mapping: introduce dma_get_sgtable() function
  ARM: dma-mapping: add support for DMA_ATTR_NO_KERNEL_MAPPING attribute
  common: DMA-mapping: add DMA_ATTR_NO_KERNEL_MAPPING attribute
  common: dma-mapping: add support for generic dma_mmap_* calls
  ARM: dma-mapping: fix error path for memory allocation failure
  ARM: dma-mapping: add more sanity checks in arm_dma_mmap()
  ARM: dma-mapping: remove custom consistent dma region
  mm: vmalloc: use const void * for caller argument
  scatterlist: add sg_alloc_table_from_pages function
2012-07-30 10:11:31 -07:00
Marek Szyprowski
d2b7428eb0 common: dma-mapping: introduce dma_get_sgtable() function
This patch adds dma_get_sgtable() function which is required to let
drivers to share the buffers allocated by DMA-mapping subsystem. Right
now the driver gets a dma address of the allocated buffer and the kernel
virtual mapping for it. If it wants to share it with other device (= map
into its dma address space) it usually hacks around kernel virtual
addresses to get pointers to pages or assumes that both devices share
the DMA address space. Both solutions are just hacks for the special
cases, which should be avoided in the final version of buffer sharing.

To solve this issue in a generic way, a new call to DMA mapping has been
introduced - dma_get_sgtable(). It allocates a scatter-list which
describes the allocated buffer and lets the driver(s) to use it with
other device(s) by calling dma_map_sg() on it.

This patch provides a generic implementation based on virt_to_page()
call. Architectures which require more sophisticated translation might
provide their own get_sgtable() methods.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-30 12:25:46 +02:00
Marek Szyprowski
64ccc9c033 common: dma-mapping: add support for generic dma_mmap_* calls
Commit 9adc5374 ('common: dma-mapping: introduce mmap method') added a
generic method for implementing mmap user call to dma_map_ops structure.

This patch converts ARM and PowerPC architectures (the only providers of
dma_mmap_coherent/dma_mmap_writecombine calls) to use this generic
dma_map_ops based call and adds a generic cross architecture
definition for dma_mmap_attrs, dma_mmap_coherent, dma_mmap_writecombine
functions.

The generic mmap virt_to_page-based fallback implementation is provided for
architectures which don't provide their own implementation for mmap method.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-30 12:25:46 +02:00
Al Viro
921a1650de new helper: done_path_create()
releases what needs to be released after {kern,user}_path_create()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-29 21:24:13 +04:00
Linus Torvalds
fa93669a19 Driver core merge for 3.6-rc1
Here's the big driver core pull request for 3.6-rc1.
 
 Unlike 3.5, this kernel should be a lot tamer, with the printk changes now
 settled down.  All we have here is some extcon driver updates, w1 driver
 updates, a few printk cleanups that weren't needed for 3.5, but are good to
 have now, and some other minor fixes/changes in the driver core.
 
 All of these have been in the linux-next releases for a while now.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAlARgIUACgkQMUfUDdst+ynDHgCfRNwIB9L+zZvjcKE5e1BhDbUl
 wVUAn398DFgbJ1+PjGkd1EMR2uVTh7Ou
 =MIFu
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core changes from Greg Kroah-Hartman:
 "Here's the big driver core pull request for 3.6-rc1.

  Unlike 3.5, this kernel should be a lot tamer, with the printk changes
  now settled down.  All we have here is some extcon driver updates, w1
  driver updates, a few printk cleanups that weren't needed for 3.5, but
  are good to have now, and some other minor fixes/changes in the driver
  core.

  All of these have been in the linux-next releases for a while now.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'driver-core-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (38 commits)
  printk: Export struct log size and member offsets through vmcoreinfo
  Drivers: hv: Change the hex constant to a decimal constant
  driver core: don't trigger uevent after failure
  extcon: MAX77693: Add extcon-max77693 driver to support Maxim MAX77693 MUIC device
  sysfs: fail dentry revalidation after namespace change fix
  sysfs: fail dentry revalidation after namespace change
  extcon: spelling of detach in function doc
  extcon: arizona: Stop microphone detection if we give up on it
  extcon: arizona: Update cable reporting calls and split headset
  PM / Runtime: Do not increment device usage counts before probing
  kmsg - do not flush partial lines when the console is busy
  kmsg - export "continuation record" flag to /dev/kmsg
  kmsg - avoid warning for CONFIG_PRINTK=n compilations
  kmsg - properly print over-long continuation lines
  driver-core: Use kobj_to_dev instead of re-implementing it
  driver-core: Move kobj_to_dev from genhd.h to device.h
  driver core: Move deferred devices to the end of dpm_list before probing
  driver core: move uevent call to driver_register
  driver core: fix shutdown races with probe/remove(v3)
  Extcon: Arizona: Add driver for Wolfson Arizona class devices
  ...
2012-07-26 11:25:33 -07:00
Linus Torvalds
bdc0077af5 SCSI misc on 20120724
The most important feature of this patch set is the new async infrastructure
 that makes sure async_synchronize_full() synchronizes all domains and allows
 us to remove all the hacks (like having scsi_complete_async_scans() in the
 device base code) and means that the async infrastructure will "just work" in
 future. The rest is assorted driver updates (aacraid, bnx2fc, virto-scsi,
 megaraid, bfa, lpfc, qla2xxx, qla4xxx) plus a lot of infrastructure work in
 sas and FC.
 
 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJQDjDCAAoJEDeqqVYsXL0M/sMH/jVgBfF1mjR+DQuTscKyD21w
 0BQLn5OmvDZDqo44iqQzNRObw7CxkBkUtHoozsknLijw+KggER653ZOAtUdIHfI/
 /uo7iJQ3J3D/Ezm99HYSpZiF2juZwsBRtFBoKkGqOpMlzFUx5o4hUbH5OcINxnHR
 VmvJU5K1kg8D77Q6zK+Atl14/Rfibc2IoufFmbYdplUAM/tV0BpBSSHJAJvqua76
 NGMl4KJcPZnXe/4LXcxZia5A2efdFFEzaQ2mM9rUVEAgHDAxc0Zg9IoDhGd08FX4
 G55NK+6+bKb9s7bgyva0T/iy817TRCzjteeYNFrb8nBRe7aQbAivaBHQFXIyvdQ=
 =y2sh
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull first round of SCSI updates from James Bottomley:
 "The most important feature of this patch set is the new async
  infrastructure that makes sure async_synchronize_full() synchronizes
  all domains and allows us to remove all the hacks (like having
  scsi_complete_async_scans() in the device base code) and means that
  the async infrastructure will "just work" in future.

  The rest is assorted driver updates (aacraid, bnx2fc, virto-scsi,
  megaraid, bfa, lpfc, qla2xxx, qla4xxx) plus a lot of infrastructure
  work in sas and FC.

  Signed-off-by: James Bottomley <JBottomley@Parallels.com>"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (97 commits)
  [SCSI] Revert "[SCSI] fix async probe regression"
  [SCSI] cleanup usages of scsi_complete_async_scans
  [SCSI] queue async scan work to an async_schedule domain
  [SCSI] async: make async_synchronize_full() flush all work regardless of domain
  [SCSI] async: introduce 'async_domain' type
  [SCSI] bfa: Fix to set correct return error codes and misc cleanup.
  [SCSI] aacraid: Series 7 Async. (performance) mode support
  [SCSI] aha152x: Allow use on 64bit systems
  [SCSI] virtio-scsi: Add vdrv->scan for post VIRTIO_CONFIG_S_DRIVER_OK LUN scanning
  [SCSI] bfa: squelch lockdep complaint with a spin_lock_init
  [SCSI] qla2xxx: remove unnecessary reads of PCI_CAP_ID_EXP
  [SCSI] qla4xxx: remove unnecessary read of PCI_CAP_ID_EXP
  [SCSI] ufs: fix incorrect return value about SUCCESS and FAILED
  [SCSI] ufs: reverse the ufshcd_is_device_present logic
  [SCSI] ufs: use module_pci_driver
  [SCSI] usb-storage: update usb devices for write cache quirk in quirk list.
  [SCSI] usb-storage: add support for write cache quirk
  [SCSI] set to WCE if usb cache quirk is present.
  [SCSI] virtio-scsi: hotplug support for virtio-scsi
  [SCSI] virtio-scsi: split scatterlist per target
  ...
2012-07-24 18:11:22 -07:00
Linus Torvalds
a66d2c8f7e Merge branch 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull the big VFS changes from Al Viro:
 "This one is *big* and changes quite a few things around VFS.  What's in there:

   - the first of two really major architecture changes - death to open
     intents.

     The former is finally there; it was very long in making, but with
     Miklos getting through really hard and messy final push in
     fs/namei.c, we finally have it.  Unlike his variant, this one
     doesn't introduce struct opendata; what we have instead is
     ->atomic_open() taking preallocated struct file * and passing
     everything via its fields.

     Instead of returning struct file *, it returns -E...  on error, 0
     on success and 1 in "deal with it yourself" case (e.g.  symlink
     found on server, etc.).

     See comments before fs/namei.c:atomic_open().  That made a lot of
     goodies finally possible and quite a few are in that pile:
     ->lookup(), ->d_revalidate() and ->create() do not get struct
     nameidata * anymore; ->lookup() and ->d_revalidate() get lookup
     flags instead, ->create() gets "do we want it exclusive" flag.

     With the introduction of new helper (kern_path_locked()) we are rid
     of all struct nameidata instances outside of fs/namei.c; it's still
     visible in namei.h, but not for long.  Come the next cycle,
     declaration will move either to fs/internal.h or to fs/namei.c
     itself.  [me, miklos, hch]

   - The second major change: behaviour of final fput().  Now we have
     __fput() done without any locks held by caller *and* not from deep
     in call stack.

     That obviously lifts a lot of constraints on the locking in there.
     Moreover, it's legal now to call fput() from atomic contexts (which
     has immediately simplified life for aio.c).  We also don't need
     anti-recursion logics in __scm_destroy() anymore.

     There is a price, though - the damn thing has become partially
     asynchronous.  For fput() from normal process we are guaranteed
     that pending __fput() will be done before the caller returns to
     userland, exits or gets stopped for ptrace.

     For kernel threads and atomic contexts it's done via
     schedule_work(), so theoretically we might need a way to make sure
     it's finished; so far only one such place had been found, but there
     might be more.

     There's flush_delayed_fput() (do all pending __fput()) and there's
     __fput_sync() (fput() analog doing __fput() immediately).  I hope
     we won't need them often; see warnings in fs/file_table.c for
     details.  [me, based on task_work series from Oleg merged last
     cycle]

   - sync series from Jan

   - large part of "death to sync_supers()" work from Artem; the only
     bits missing here are exofs and ext4 ones.  As far as I understand,
     those are going via the exofs and ext4 trees resp.; once they are
     in, we can put ->write_super() to the rest, along with the thread
     calling it.

   - preparatory bits from unionmount series (from dhowells).

   - assorted cleanups and fixes all over the place, as usual.

  This is not the last pile for this cycle; there's at least jlayton's
  ESTALE work and fsfreeze series (the latter - in dire need of fixes,
  so I'm not sure it'll make the cut this cycle).  I'll probably throw
  symlink/hardlink restrictions stuff from Kees into the next pile, too.
  Plus there's a lot of misc patches I hadn't thrown into that one -
  it's large enough as it is..."

* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (127 commits)
  ext4: switch EXT4_IOC_RESIZE_FS to mnt_want_write_file()
  btrfs: switch btrfs_ioctl_balance() to mnt_want_write_file()
  switch dentry_open() to struct path, make it grab references itself
  spufs: shift dget/mntget towards dentry_open()
  zoran: don't bother with struct file * in zoran_map
  ecryptfs: don't reinvent the wheels, please - use struct completion
  don't expose I_NEW inodes via dentry->d_inode
  tidy up namei.c a bit
  unobfuscate follow_up() a bit
  ext3: pass custom EOF to generic_file_llseek_size()
  ext4: use core vfs llseek code for dir seeks
  vfs: allow custom EOF in generic_file_llseek code
  vfs: Avoid unnecessary WB_SYNC_NONE writeback during sys_sync and reorder sync passes
  vfs: Remove unnecessary flushing of block devices
  vfs: Make sys_sync writeout also block device inodes
  vfs: Create function for iterating over block devices
  vfs: Reorder operations during sys_sync
  quota: Move quota syncing to ->sync_fs method
  quota: Split dquot_quota_sync() to writeback and cache flushing part
  vfs: Move noop_backing_dev_info check from sync into writeback
  ...
2012-07-23 12:27:27 -07:00
Linus Torvalds
7100e505b7 Power management updates for 3.6
* ACPI conversion to PM handling based on struct dev_pm_ops.
 * Conversion of a number of platform drivers to PM handling based on struct
   dev_pm_ops and removal of empty legacy PM callbacks from a couple of PCI
   drivers.
 * Suspend-to-both for in-kernel hibernation from Bojan Smojver.
 * cpuidle fixes and cleanups from ShuoX Liu, Daniel Lezcano and Preeti U Murthy.
 * cpufreq bug fixes from Jonghwa Lee and Stephen Boyd.
 * Suspend and hibernate fixes from Srivatsa S. Bhat and Colin Cross.
 * Generic PM domains framework updates.
 * RTC CMOS wakeup signaling update from Paul Fox.
 * sparse warnings fixes from Sachin Kamat.
 * Build warnings fixes for the generic PM domains framework and PM sysfs code.
 * sysfs switch for printing device suspend times from Sameer Nanda.
 * Documentation fix from Oskar Schirmer.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIcBAABAgAGBQJQDF5eAAoJEKhOf7ml8uNsEaAP/2wg4faoOGob5A0/7tLqG3Cw
 xnTmGsfL7wG07Q8ykCL1BSlBb1VeJz8L6LTmUpaABI4M//oIBlcYQKyCE0Tat1AO
 9bJXFzK7qcHMhkTz6d6LDqtVzR3NGM3ypjZqj8aEXBov07LMR1AXvgNwXXhv25zM
 0unwrh1XNinBN3n+oaktpWk1YHUjsa5IMU+2tQJrocuHXcgK30vGXZVrZ4g9w1c2
 eS+ED1oKUqOYtFzIUX+aCtaDDheGaPlugk/GOtIB7Sae0s0vMlxH/T5ncB4SxRC+
 v3s4OykqQc5Dc8+0bNlBH7ykSVNB0PoQiyKDY67CxtH+q1xQSc9/f3XJqnGMaVDE
 17eZUZsL4qSyzRuCbPCGAgwBHmx3qNCMu1i1BcmnSxU+ikPUeCR7mYOP0mRThwPH
 OSfs+c/vZ+Ow6CwVE4UFrbm9Jve7ADnCrlZzT2m6XjhHGyjKP7SJlzP9TPsZ0LRk
 oxgQDYHmxbo50t9tBCz5L4ZTMKkDp28e78x84/CteP85srcW3GqDxrPyp2uzJu5O
 tvIEBvVlc4ucq8sG83RkugQwrG/2cQwG2HO9ERAwq01HHA1BYsuU3A961Jqf5CZo
 nFRSnByvVj/imPf47OWpDPAbVEs7jxufJuLEbPwGj1MkttTGDBIRu3zldXt2S6kP
 Q4qYU6fDaQQHFc90pqxQ
 =vC4/
 -----END PGP SIGNATURE-----

Merge tag 'pm-for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:

 - ACPI conversion to PM handling based on struct dev_pm_ops.
 - Conversion of a number of platform drivers to PM handling based on
   struct dev_pm_ops and removal of empty legacy PM callbacks from a
   couple of PCI drivers.
 - Suspend-to-both for in-kernel hibernation from Bojan Smojver.
 - cpuidle fixes and cleanups from ShuoX Liu, Daniel Lezcano and Preeti
   Murthy.
 - cpufreq bug fixes from Jonghwa Lee and Stephen Boyd.
 - Suspend and hibernate fixes from Srivatsa Bhat and Colin Cross.
 - Generic PM domains framework updates.
 - RTC CMOS wakeup signaling update from Paul Fox.
 - sparse warnings fixes from Sachin Kamat.
 - Build warnings fixes for the generic PM domains framework and PM
   sysfs code.
 - sysfs switch for printing device suspend times from Sameer Nanda.
 - Documentation fix from Oskar Schirmer.

* tag 'pm-for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (70 commits)
  cpufreq: Fix sysfs deadlock with concurrent hotplug/frequency switch
  EXYNOS: bugfix on retrieving old_index from freqs.old
  PM / Sleep: call early resume handlers when suspend_noirq fails
  PM / QoS: Use NULL pointer instead of plain integer in qos.c
  PM / QoS: Use NULL pointer instead of plain integer in pm_qos.h
  PM / Sleep: Require CAP_BLOCK_SUSPEND to use wake_lock/wake_unlock
  PM / Sleep: Add missing static storage class specifiers in main.c
  cpuilde / ACPI: remove time from acpi_processor_cx structure
  cpuidle / ACPI: remove usage from acpi_processor_cx structure
  cpuidle / ACPI : remove latency_ticks from acpi_processor_cx structure
  rtc-cmos: report wakeups from interrupt handler
  PM / Sleep: Fix build warning in sysfs.c for CONFIG_PM_SLEEP unset
  PM / Domains: Fix build warning for CONFIG_PM_RUNTIME unset
  olpc-xo15-sci: Use struct dev_pm_ops for power management
  PM / Domains: Replace plain integer with NULL pointer in domain.c file
  PM / Domains: Add missing static storage class specifier in domain.c file
  PM / crypto / ux500: Use struct dev_pm_ops for power management
  PM / IPMI: Remove empty legacy PCI PM callbacks
  tpm_nsc: Use struct dev_pm_ops for power management
  tpm_tis: Use struct dev_pm_ops for power management
  ...
2012-07-22 13:36:52 -07:00
Linus Torvalds
7cd58b0a3b regmap: Updates for 3.6
A few fixes plus a few features, the most generally useful thing being
 the register paging support which can be used by quite a few devices:
 
 - Support for wake IRQs in regmap-irq
 - Support for register paging
 - Support for explicitly specified endianness, mostly for MMIO.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQDEZ4AAoJEBus8iNuMP3diagQAIsrFy8zV+7JikPJN5H70gsj
 lvlTzmT0ldMYhheuciBCTgyQCSZd2MH6FpfI8El0sYk9TsZyBASiOMNBvRPhEubP
 DetnEBY85mtU9Wryi+AuGrFnt00us4+wf37Ubf5AXF5q+ZcNQzJaR59iVcdghrf6
 Dj0kdErHuwziBF3gmm4MGX72qP15QlG9GtO2MwiuLtsnJ34lNlTnglClxUaKX8vi
 eFY+wfnsfam8CSbfs9XewUsvdA1c2o+7/pm3pVOuns6FA7CyfeaWQixmo7VcKLHn
 g70Qezc+HNjpxHcZaP94Oaq1dC/32rwHXZweSfePj6c3y4Mr2czCTF4jPUtV6cfA
 LQdRcCi73iKwI1XrdUEqJOojEHErmeL+YZ9SzTSroNHv54V7KvMHz99gYs31f+gH
 R44ZxbTWKhpjeFmDUqv/rZ891pKUli4AHNJi9jOTgHmEdBK+b0dDUmPZhkz2x19N
 8KOpr5T3yDbancULdpfkp3vOTtJE3eACFFytH9ZtM7SeCoYWtwDSR3ALpmQ41JFk
 p+ITOrsBYC3kiwjMrBEVd6HFvYl60Q8RDwHoZpqk2PNpy9yuyYqFXjmdPsjxf/gw
 WGTcYEceocsylJ20GnZ3Btkk3uANRPmPoQZdhOO/IB9cnCw7m9EDZqNBpY/LLiIB
 /jWn4E28pSxTnVYkd7b9
 =uSSe
 -----END PGP SIGNATURE-----

Merge tag 'regmap-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull regmap updates from Mark Brown:
 "A few fixes plus a few features, the most generally useful thing being
  the register paging support which can be used by quite a few devices:

   - Support for wake IRQs in regmap-irq
   - Support for register paging
   - Support for explicitly specified endianness, mostly for MMIO."

* tag 'regmap-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Fix incorrect arguments to kzalloc() call
  regmap: Add hook for printk logging for debugging during early init
  regmap: Fix work_buf switching for page update during virtual range access.
  regmap: Add support for register indirect addressing.
  regmap: Move lock out from internal function _regmap_update_bits().
  regmap: mmio: Staticize regmap_mmio_gen_context()
  regmap: Remove warning on stubbed dev_get_regmap()
  regmap: Implement support for wake IRQs
  regmap: Don't try to map non-existant IRQs
  regmap: Constify regmap_irq_chip
  regmap: mmio: request native endian formatting
  regmap: allow busses to request formatting with specific endianness
2012-07-22 13:03:14 -07:00
Mark Brown
38e23194e1 Merge branches 'regmap-core', 'regmap-irq' and 'regmap-page' into regmap-next
Conflicts (trivial context stuff):
	drivers/base/regmap/regmap.c
	include/linux/regmap.h
2012-07-22 19:26:07 +01:00
Dan Williams
492d542273 [SCSI] cleanup usages of scsi_complete_async_scans
Now that scsi registers its async scan work with the async subsystem,
wait_for_device_probe() is sufficient for ensuring all scanning is
complete.

[jejb: fix merge problems with eea03c20ae Make wait_for_device_probe() also do scsi_complete_async_scans()]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20 09:25:22 +01:00
Rafael J. Wysocki
382e159619 Merge branch 'pm-sleep'
* pm-sleep:
  PM / Sleep: call early resume handlers when suspend_noirq fails
2012-07-19 10:39:21 +02:00
Colin Cross
064b021fbe PM / Sleep: call early resume handlers when suspend_noirq fails
Commit cf579dfb82 (PM / Sleep: Introduce
"late suspend" and "early resume" of devices) introduced a bug where
suspend_late handlers would be called, but if dpm_suspend_noirq returned
an error the early_resume handlers would never be called.  All devices
would end up on the dpm_late_early_list, and would never be resumed
again.

Fix it by calling dpm_resume_early when dpm_suspend_noirq returns
an error.

Signed-off-by: Colin Cross <ccross@android.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-19 10:38:06 +02:00
Linus Torvalds
eea03c20ae Make wait_for_device_probe() also do scsi_complete_async_scans()
Commit a7a20d1039 ("sd: limit the scope of the async probe domain")
make the SCSI device probing run device discovery in it's own async
domain.

However, as a result, the partition detection was no longer synchronized
by async_synchronize_full() (which, despite the name, only synchronizes
the global async space, not all of them).  Which in turn meant that
"wait_for_device_probe()" would not wait for the SCSI partitions to be
parsed.

And "wait_for_device_probe()" was what the boot time init code relied on
for mounting the root filesystem.

Now, most people never noticed this, because not only is it
timing-dependent, but modern distributions all use initrd.  So the root
filesystem isn't actually on a disk at all.  And then before they
actually mount the final disk filesystem, they will have loaded the
scsi-wait-scan module, which not only does the expected
wait_for_device_probe(), but also does scsi_complete_async_scans().

[ Side note: scsi_complete_async_scans() had also been partially broken,
  but that was fixed in commit 43a8d39d01 ("fix async probe
  regression"), so that same commit a7a20d1039 had actually broken
  setups even if you used scsi-wait-scan explicitly ]

Solve this problem by just moving the scsi_complete_async_scans() call
into wait_for_device_probe().  Everybody who wants to wait for device
probing to finish really wants the SCSI probing to complete, so there's
no reason not to do this.

So now "wait_for_device_probe()" really does what the name implies, and
properly waits for device probing to finish.  This also removes the now
unnecessary extra calls to scsi_complete_async_scans().

Reported-and-tested-by: Artem S. Tashkinov <t.artem@mailcity.com>
Cc: Dan Williams <dan.j.williams@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: James Bottomley <jbottomley@parallels.com>
Cc: Borislav Petkov <bp@amd64.org>
Cc: linux-scsi <linux-scsi@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-18 18:15:46 -07:00
Rafael J. Wysocki
bd798b7a88 Merge branch 'pm-qos'
* pm-qos:
  PM / QoS: Use NULL pointer instead of plain integer in qos.c
  PM / QoS: Use NULL pointer instead of plain integer in pm_qos.h
2012-07-19 00:03:50 +02:00
Rafael J. Wysocki
d52fdf1337 Merge branch 'pm-sleep'
* pm-sleep:
  PM / Sleep: Require CAP_BLOCK_SUSPEND to use wake_lock/wake_unlock
  PM / Sleep: Add missing static storage class specifiers in main.c
  PM / Sleep: Fix build warning in sysfs.c for CONFIG_PM_SLEEP unset
  PM / Hibernate: Print hibernation/thaw progress indicator one line at a time.
  PM / Sleep: Separate printing suspend times from initcall_debug
  PM / Sleep: add knob for printing device resume times
  ftrace: Disable function tracing during suspend/resume and hibernation, again
  PM / Hibernate: Enable suspend to both for in-kernel hibernation.
2012-07-19 00:03:29 +02:00
Rafael J. Wysocki
7791bd230c Merge branch 'pm-domains'
* pm-domains:
  PM / Domains: Fix build warning for CONFIG_PM_RUNTIME unset
  PM / Domains: Replace plain integer with NULL pointer in domain.c file
  PM / Domains: Add missing static storage class specifier in domain.c file
  PM / Domains: Allow device callbacks to be added at any time
  PM / Domains: Add device domain data reference counter
  PM / Domains: Add preliminary support for cpuidle, v2
  PM / Domains: Do not stop devices after restoring their states
  PM / Domains: Use subsystem runtime suspend/resume callbacks by default
2012-07-19 00:03:17 +02:00
Sachin Kamat
ad0446eb11 PM / QoS: Use NULL pointer instead of plain integer in qos.c
Fix the following sparse warning:
drivers/base/power/qos.c:465:29: warning: Using plain integer as NULL pointer

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-19 00:02:36 +02:00
Sachin Kamat
7664e96935 PM / Sleep: Add missing static storage class specifiers in main.c
Fix the following sparse warnings:
drivers/base/power/main.c:48:1: warning: symbol 'dpm_prepared_list' was not declared. Should it be static?
drivers/base/power/main.c:49:1: warning: symbol 'dpm_suspended_list' was not declared. Should it be static?
drivers/base/power/main.c:50:1: warning: symbol 'dpm_late_early_list' was not declared. Should it be static?
drivers/base/power/main.c:51:1: warning: symbol 'dpm_noirq_list' was not declared. Should it be static?

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-18 23:57:47 +02:00
Dimitris Papastamos
463351194d regmap: Fix incorrect arguments to kzalloc() call
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-18 22:13:53 +01:00
Sebastian Ott
a14af32564 driver core: don't trigger uevent after failure
Do not send the uevent if driver_add_groups failed.

Reported-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-17 10:40:23 -07:00
Rafael J. Wysocki
eed5d21507 PM / Runtime: Do not increment device usage counts before probing
The pm_runtime_get_noresume() calls before really_probe() and
before executing __device_attach() for each driver on the
device's bus cause problems to happen if probing fails and if the
driver has enabled runtime PM for the device in its .probe()
callback.  Namely, in that case, if the device has been resumed
by the driver after enabling its runtime PM and if it turns out that
.probe() should return an error, the driver is supposed to suspend
the device and disable its runtime PM before exiting .probe().
However, because the device's runtime PM usage counter was
incremented by the core before calling .probe(), the driver's attempt
to suspend the device will not succeed and the device will remain in
the full-power state after the failing .probe() has returned.

To fix this issue, remove the pm_runtime_get_noresume() calls from
driver_probe_device() and from device_attach() and replace the
corresponding pm_runtime_put_sync() calls with pm_runtime_idle()
to preserve the existing behavior (which is to check if the device
is idle and to suspend it eventually in that case after probing).

Reported-and-tested-by: Kevin Hilman <khilman@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16 19:25:49 -07:00
Lars-Peter Clausen
b0d1f807f3 driver-core: Use kobj_to_dev instead of re-implementing it
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16 18:05:45 -07:00
Mark Brown
8153584e3f driver core: Move deferred devices to the end of dpm_list before probing
When deferred probe was originally added the idea was that devices which
defer their probes would move themselves to the end of dpm_list in order
to try to keep the assumptions that we're making about the list being in
roughly the order things should be suspended correct. However this hasn't
been what's been happening and doing it requires a lot of duplicated code
to do the moves.

Instead take a simple, brute force solution and have the deferred probe
code push devices to the end of dpm_list before it retries the probe. This
does mean we lock the dpm_list a bit more often but it's very simple and
the code shouldn't be a fast path. We do the move with the deferred mutex
dropped since doing things with fewer locks held simultaneously seems like
a good idea.

This approach was most recently suggested by Grant Likely.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Grant Likely <grant.likely@secretlab.ca>,
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16 18:05:45 -07:00
Sebastian Ott
5a7689fd5b driver core: move uevent call to driver_register
Device driver attribute groups are created after userspace is notified
via an add event. Fix this by moving the kobject_uevent call to
driver_register after the attribute groups are added.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16 18:04:25 -07:00
Ming Lei
d1c6c030fc driver core: fix shutdown races with probe/remove(v3)
Firstly, .shutdown callback may touch a uninitialized hardware
if dev->driver is set and .probe is not completed.

Secondly, device_shutdown() may dereference a null pointer to cause
oops when dev->driver is cleared after it has been checked in
device_shutdown().

So just hold device lock and its parent lock(if it has) to
fix the races.

Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16 18:04:25 -07:00
Al Viro
79714f72d3 get rid of kern_path_parent()
all callers want the same thing, actually - a kinda-sorta analog of
kern_path_create().  I.e. they want parent vfsmount/dentry (with
->i_mutex held, to make sure the child dentry is still their child)
+ the child dentry.

Signed-off-by Al Viro <viro@zeniv.linux.org.uk>
2012-07-14 16:35:02 +04:00
Rafael J. Wysocki
d181b49eb3 PM / Sleep: Fix build warning in sysfs.c for CONFIG_PM_SLEEP unset
The power/async device sysfs attribute is only used if both
CONFIG_PM_ADVANCED_DEBUG and CONFIG_PM_SLEEP are set, but the code
implementing it doesn't depend on CONFIG_PM_SLEEP.  As a result, a
build warning appears if CONFIG_PM_ADVANCED_DEBUG is set and
CONFIG_PM_SLEEP is not set.

Fix it by adding a #ifdef CONFIG_PM_SLEEP around the code in
question.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-12 22:40:02 +02:00
Rafael J. Wysocki
8e9afafdad PM / Domains: Fix build warning for CONFIG_PM_RUNTIME unset
The functions genpd_save_dev() and genpd_restore_dev() are not used
for CONFIG_PM_RUNTIME unset, so move them under an appropriate
#ifdef.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-12 22:39:49 +02:00
Sachin Kamat
db79e53dd5 PM / Domains: Replace plain integer with NULL pointer in domain.c file
Fixes the following sparse warning:
drivers/base/power/domain.c:1679:55: warning: Using plain integer as NULL pointer

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-11 12:25:49 +02:00
Sachin Kamat
8951ef0219 PM / Domains: Add missing static storage class specifier in domain.c file
Fixes the folloiwng sparse warning:
drivers/base/power/domain.c:149:5:
warning: symbol '__pm_genpd_poweron' was not declared. Should it be static?

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-10 21:47:07 +02:00
Preeti U Murthy
8651f97bd9 PM / cpuidle: System resume hang fix with cpuidle
On certain bios, resume hangs if cpus are allowed to enter idle states
during suspend [1].

This was fixed in apci idle driver [2].But intel_idle driver does not
have this fix. Thus instead of replicating the fix in both the idle
drivers, or in more platform specific idle drivers if needed, the
more general cpuidle infrastructure could handle this.

A suspend callback in cpuidle_driver could handle this fix. But
a cpuidle_driver provides only basic functionalities like platform idle
state detection capability and mechanisms to support entry and exit
into CPU idle states. All other cpuidle functions are found in the
cpuidle generic infrastructure for good reason that all cpuidle
drivers, irrepective of their platforms will support these functions.

One option therefore would be to register a suspend callback in cpuidle
which handles this fix. This could be called through a PM_SUSPEND_PREPARE
notifier. But this is too generic a notfier for a driver to handle.

Also, ideally the job of cpuidle is not to handle side effects of suspend.
It should expose the interfaces which "handle cpuidle 'during' suspend"
or any other operation, which the subsystems call during that respective
operation.

The fix demands that during suspend, no cpus should be allowed to enter
deep C-states. The interface cpuidle_uninstall_idle_handler() in cpuidle
ensures that. Not just that it also kicks all the cpus which are already
in idle out of their idle states which was being done during cpu hotplug
through a CPU_DYING_FROZEN callbacks.

Now the question arises about when during suspend should
cpuidle_uninstall_idle_handler() be called. Since we are dealing with
drivers it seems best to call this function during dpm_suspend().
Delaying the call till dpm_suspend_noirq() does no harm, as long as it is
before cpu_hotplug_begin() to avoid race conditions with cpu hotpulg
operations. In dpm_suspend_noirq(), it would be wise to place this call
before suspend_device_irqs() to avoid ugly interactions with the same.

Ananlogously, during resume.

References:
[1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/674075.
[2] http://marc.info/?l=linux-pm&m=133958534231884&w=2

Reported-and-tested-by: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-10 21:34:49 +02:00
Mark Brown
1044c180de regmap: Add hook for printk logging for debugging during early init
Sometimes for failures during very early init the trace infrastructure
isn't available early enough to be used.  For this sort of problem
defining LOG_DEVICE will add printks for basic register I/O on a specific
device, allowing trace to be extracted when the trace system doesn't come
up early enough to work with.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-06 14:16:16 +01:00
Rafael J. Wysocki
62d4490294 PM / Domains: Allow device callbacks to be added at any time
Make it possible to modify device callbacks used by the generic PM
domains core code at any time, not only after the device has been
added to a domain.  This will allow device drivers to provide their
own device PM domain callbacks even if they are registered before
adding the devices to PM domains.

For this purpose, use the observation that the struct
generic_pm_domain_data object containing the relevant callback
pointers may be allocated by pm_genpd_add_callbacks() and the
callbacks may be set before __pm_genpd_add_device() is run for
the given device.  This object will then be used by
__pm_genpd_add_device(), but it has to be protected from
premature removal by reference counting.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-05 22:12:54 +02:00
Rafael J. Wysocki
1d5fcfec22 PM / Domains: Add device domain data reference counter
Add a mechanism for counting references to the
struct generic_pm_domain_data object pointed to by
dev->power.subsys_data->domain_data if the device in question
belongs to a generic PM domain.

This change is necessary for a subsequent patch making it possible to
allocate that object from within pm_genpd_add_callbacks(), so that
drivers can attach their PM domain device callbacks to devices before
those devices are added to PM domains.

This patch has been tested on the SH7372 Mackerel board.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-05 22:12:32 +02:00
Greg Kroah-Hartman
6fbfd0592e Merge v3.5-rc5 into driver-core-next
This picks up the big printk fixes, and resolves a merge issue with:
	drivers/extcon/extcon_gpio.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-05 08:25:34 -07:00
Rafael J. Wysocki
cbc9ef0287 PM / Domains: Add preliminary support for cpuidle, v2
On some systems there are CPU cores located in the same power
domains as I/O devices.  Then, power can only be removed from the
domain if all I/O devices in it are not in use and the CPU core
is idle.  Add preliminary support for that to the generic PM domains
framework.

First, the platform is expected to provide a cpuidle driver with one
extra state designated for use with the generic PM domains code.
This state should be initially disabled and its exit_latency value
should be set to whatever time is needed to bring up the CPU core
itself after restoring power to it, not including the domain's
power on latency.  Its .enter() callback should point to a procedure
that will remove power from the domain containing the CPU core at
the end of the CPU power transition.

The remaining characteristics of the extra cpuidle state, referred to
as the "domain" cpuidle state below, (e.g. power usage, target
residency) should be populated in accordance with the properties of
the hardware.

Next, the platform should execute genpd_attach_cpuidle() on the PM
domain containing the CPU core.  That will cause the generic PM
domains framework to treat that domain in a special way such that:

 * When all devices in the domain have been suspended and it is about
   to be turned off, the states of the devices will be saved, but
   power will not be removed from the domain.  Instead, the "domain"
   cpuidle state will be enabled so that power can be removed from
   the domain when the CPU core is idle and the state has been chosen
   as the target by the cpuidle governor.

 * When the first I/O device in the domain is resumed and
   __pm_genpd_poweron(() is called for the first time after
   power has been removed from the domain, the "domain" cpuidle
   state will be disabled to avoid subsequent surprise power removals
   via cpuidle.

The effective exit_latency value of the "domain" cpuidle state
depends on the time needed to bring up the CPU core itself after
restoring power to it as well as on the power on latency of the
domain containing the CPU core.  Thus the "domain" cpuidle state's
exit_latency has to be recomputed every time the domain's power on
latency is updated, which may happen every time power is restored
to the domain, if the measured power on latency is greater than
the latency stored in the corresponding generic_pm_domain structure.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: Kevin Hilman <khilman@ti.com>
2012-07-03 19:07:42 +02:00
Rafael J. Wysocki
80de3d7f41 PM / Domains: Do not stop devices after restoring their states
While resuming a device belonging to a PM domain,
pm_genpd_runtime_resume() calls __pm_genpd_restore_device() to
restore its state, if necessary.  The latter starts the device,
using genpd_start_dev(), restores its state, using
genpd_restore_dev(), and then stops it, using genpd_stop_dev().
However, this last operation is not necessary, because the
device is supposed to be operational after pm_genpd_runtime_resume()
has returned and because of it pm_genpd_runtime_resume() has to
call genpd_start_dev() once again for the "restored" device, which
is inefficient.

To make things more efficient, remove the call to genpd_stop_dev()
from __pm_genpd_restore_device() and the direct call to
genpd_start_dev() from pm_genpd_runtime_resume().  [Of course,
genpd_start_dev() still has to be called by it for devices with the
power.irq_safe flag set, because __pm_genpd_restore_device() is not
executed for them.]

This change has been tested on the SH7372 Mackerel board.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-01 13:31:29 +02:00
Rafael J. Wysocki
0b589741b8 PM / Domains: Use subsystem runtime suspend/resume callbacks by default
Currently, the default "save state" and "restore state" routines
for generic PM domains, pm_genpd_default_save_state() and
pm_genpd_default_restore_state(), respectively, only use runtime PM
callbacks provided by device drivers, but in general those callbacks
need not provide the entire necessary functionality.  Namely, in
general it may be necessary to execute subsystem (i.e. device type,
device class or bus type) callbacks that will carry out all of the
necessary operations.

For this reason, modify pm_genpd_default_save_state() and
pm_genpd_default_restore_state() to execute subsystem callbacks,
if they are provided, and fall back to driver callbacks otherwise.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-01 13:31:29 +02:00
Rafael J. Wysocki
b2df1d4f8b PM / Sleep: Separate printing suspend times from initcall_debug
Change the behavior of the newly introduced
/sys/power/pm_print_times attribute so that its initial value
depends on initcall_debug, but setting it to 0 will cause device
suspend/resume times not to be printed, even if initcall_debug has
been set.  This way, the people who use initcall_debug for reasons
other than PM debugging will be able to switch the suspend/resume
times printing off, if need be.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-01 13:31:23 +02:00
Sameer Nanda
4b7760ba0d PM / Sleep: add knob for printing device resume times
Added a new knob called /sys/power/pm_print_times. Setting it to 1
enables printing of time taken by devices to suspend and resume.
Setting it to 0 disables this printing (unless overridden by
initcall_debug kernel command line option).

Signed-off-by: Sameer Nanda <snanda@chromium.org>
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-01 13:31:22 +02:00
Mandeep Singh Baines
1f758b2317 PM / Sleep: Prevent waiting forever on asynchronous suspend after abort
__device_suspend() must always send a completion. Otherwise, parent
devices will wait forever.

Commit 1e2ef05b, "PM: Limit race conditions between runtime PM and
system sleep (v2)", introduced a regression by short-circuiting the
complete_all() for certain error cases.

This patch fixes the bug by always signalling a completion.

Addresses http://crosbug.com/31972

Tested by injecting an abort.

Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-24 23:31:09 +02:00
Linus Torvalds
fe80352460 Driver core and printk fixes for 3.5-rc4
Here are some fixes for 3.5-rc4 that resolve the kmsg problems that
 people have reported showing up after the printk and kmsg changes went
 into 3.5-rc1.  There are also a smattering of other tiny fixes for the
 extcon and hyper-v drivers that people have reported.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk/iNQcACgkQMUfUDdst+yklTQCfZCXFlhA43bZo/8Joqd2pLIIW
 2uoAoMze0SlfJeN6Qu7yY0P+qV/f/pc3
 =UNFY
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core and printk fixes from Greg Kroah-Hartman:
 "Here are some fixes for 3.5-rc4 that resolve the kmsg problems that
  people have reported showing up after the printk and kmsg changes went
  into 3.5-rc1.  There are also a smattering of other tiny fixes for the
  extcon and hyper-v drivers that people have reported.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'driver-core-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  extcon: max8997: Add missing kfree for info->edev in max8997_muic_remove()
  extcon: Set platform drvdata in gpio_extcon_probe() and fix irq leak
  extcon: Fix wrong index in max8997_extcon_cable[]
  kmsg - kmsg_dump() fix CONFIG_PRINTK=n compilation
  printk: return -EINVAL if the message len is bigger than the buf size
  printk: use mutex lock to stop syslog_seq from going wild
  kmsg - kmsg_dump() use iterator to receive log buffer content
  vme: change maintainer e-mail address
  Extcon: Don't try to create duplicate link names
  driver core: fixup reversed deferred probe order
  printk: Fix alignment of buf causing crash on ARM EABI
  Tools: hv: verify origin of netlink connector message
2012-06-20 15:14:28 -07:00
Krystian Garbaciak
632a5b01db regmap: Fix work_buf switching for page update during virtual range access.
After page update, orginal work_buf has to be restored regardless of
the result.

Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-19 10:42:56 +01:00
Krystian Garbaciak
6863ca6227 regmap: Add support for register indirect addressing.
Devices with register paging or indirectly accessed registers can configure
register mapping to map those on virtual address range. During access to
virtually mapped register range, indirect addressing is processed
automatically, in following steps:
  1. selector for page or indirect register is updated (when needed);
  2. register in data window is accessed.

Configuration should provide minimum and maximum register for virtual range,
details of selector field for page selection, minimum and maximum register of
data window for indirect access.

Virtual range registers are managed by cache as well as direct access
registers. In order to make indirect access more efficient, selector register
should be declared as non-volatile, if possible.

struct regmap_config is extended with the following:
struct regmap_range_cfg	*ranges;
unsigned int		n_ranges;

[Also reordered debugfs init to later on since the cleanup code was
conflicting with the new cleanup code for ranges anyway -- broonie]

Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-17 21:34:18 +01:00
Krystian Garbaciak
fc3ebd788e regmap: Move lock out from internal function _regmap_update_bits().
Locks are moved to regmap_update_bits(), which allows to reenter internal
function _regmap_update_bits() from inside of regmap read/write routines.

Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-17 21:30:39 +01:00
Randy Dunlap
6e7b4a59b3 driver core: fix some kernel-doc warnings in dma*.c
Fix kernel-doc warnings in drivers/base/dma*.c:

Warning(drivers/base/dma-buf.c:498): No description found for parameter 'vaddr'
Warning(drivers/base/dma-coherent.c:199): No description found for parameter 'ret'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14 17:15:26 -07:00
Hans de Goede
0998d06310 device-core: Ensure drvdata = NULL when no driver is bound
1) drvdata is for a driver to store a pointer to driver specific data
2) If no driver is bound, there is no driver specific data associated with
   the device
3) Thus logically drvdata should be NULL if no driver is bound.

But many drivers don't clear drvdata on device_release, or set drvdata
early on in probe and leave it set on probe error. Both of which results
in a dangling pointer in drvdata.

This patch enforce for drvdata to be NULL after device_release or on probe
failure.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13 16:40:41 -07:00