! has higher precedence than !=. H_RDY is 8 and since neither 0 nor
1 are equal to 8 the original condition was always true.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix mei build when CONFIG_PM is not enabled (i.e., fix typo):
drivers/staging/mei/main.c:1159: error: 'MEI_PM_OPS' undeclared here (not in a function)
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add mei to Kconfig and Makefile in drivers/staging
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com>
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
code that open connection and invoke
heartbeats to the AMT Watchdog client/feature, if exists
Connect to WD Client, if exists Send Start WD Command.
Every 2 secs send heartbeats.
On System shutdown/suspends, send Stop WD command.
This is intermediate stage before moving this code to standalone watchdog
driver.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com>
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
define IOCTL_MEI_CONNECT_CLIENT and its associated structure
When the user wants to connect to a ME feature/client after
it open a file descriptor to the driver, he need to use Connect
IOCTL.
This IOCTL received a struct that contains a union of 2 other structs.
1st struct - Input Parameters:
UUID - a predefine unique that identify the ME feature, this
id per feature is constant all over the chipsets
and versions.
2nd struct Output Parameters:
MaxMessageLen - maximum message length that allowed
to be send to the feature
ProtocolVersion ME feature current protocol version.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com>
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
define the MEI protocol msg structs and
HW registers, also define the MEI internal status and struct
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com>
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Init driver list and queue, MEI Hardware reset flow,
init of driver specific host client.
MEI Init/reset flow:
- Ack all waiting interrupts
- Hardware reset flow (Set Reset Bit, Generate Interrupt, Clear Reset Bit
Generate Interrupt)
- Wait for ME Ready Bit (done in interrupt thread)
- Set ME Ready Bit (done in interrupt thread)
- Send Start request (done in interrupt thread)
- wait for answer
- Send Enumerate Clients request (done in interrupt thread)
- wait for answer
- Send Get Client property for each client request (done in interrupt thread)
- Wait for answers
- Init Done.
MEI Driver connect internally to 2 ME clients/features:
AMTHI and AMT watchdog.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com>
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Implementation of the communication between host and ME.
connect/disconnect to/from a client, send MEI message,
read MEI message, flow control handling.
Each MEI message has mei_msg_hdr followed by a payload.
Driver is oblivious the payload.
ME Address/ID - This is the logical address of the ME
feature/client of that message.
Host Address/ID - This is the logical address of the Host
client of that message
Length - This is the Length of message payload in bytes
Reserved - reserved for future use.
Message Complete - This bit is used to indicative that
this is the last message of multi message
MEI transfer of a client message that is larger
then the MEI circular buffer.
Payload - Message payload (data) up to 512bytes
The HW data registers are consist two circular buffers,
one for data from ME and other data from Host application.
Each buffer has two pointers, read_ptr (H_CBRP)
and write_ptr (H_CBWP).
The buffers size is defined by depth value that exists
in the status registers (H_CBD and ME_CBD_HRA).
Every read from ME circular buffer cause read_ptr++
Every write to the Host circular buffer write_ptr++
Flow control MEI message that ME and MEI Driver use to notify
each other that a ME feature/client or Host client buffer is ready
to receive data.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com>
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ISR and interrupt thread for handling incoming data.
e.g. read bus message, read client message, handle reset requests.
quick handler:
As MEI may share interrupt with GFX and/or USB
the HW register need to be checked and acknowledged.
thread handler:
Check if HW has data for read.
Write data to HW if possible.
May init reset flow on error
there can be two types of messages:
1) bus messages:
Management messages between MEI Driver and ME e.g.
Connect request/response,
Disconnect request/response
Enum clients request/response
Flow control request/response
those message are indicated by
ME Address/ID == 0 && Host Address/ID == 0
2) feature/client messages:
message that are sends between ME Feature/Client and
an application, the struct of the message is defined
by the ME Feature Protocol (e.g. APF Protocol, AMTHI Protocol)
those message are indicated by
ME Address/ID != 0 && Host Address/ID != 0
MEI Initialization state machine is also managed by this patch.
After MEI Reset is preform:
Send Start request
wait for answer
Send Enumerate Clients request
wait for answer
Send Get Client property for each client request
wait for answers
Init Done.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com>
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
contains module entries and PCI driver and char device
definitions (using file_operations, pci_driver struts).
The HW interface is exposed on PCI interface.
PCI:
The MEI HW resources are memory map 32 bit registers
(Host and ME Status Registers and Data Registers)
and interrupt (shared, with Intel GFX on some chipsets
and USB2 controller on others).
The device is part of the chipsets and cannot be hotplugged.
The MEI device present is determined by BIOS configuration.
Probe:
The driver starts the init MEI flow, that is explained
in the patch "MEI driver init flow" [06/10],
then schedules a timer that handles
timeouts and watchdog heartbeats.
Remove:
The driver closes all connections and stops the watchdog.
The driver expose char device that supports:
open, release, write, read, ioctl, poll.
Open:
Upon open the driver allocates HOST data structure
on behalf of application which will resides in the file's
private data and assign a host ID number which
will identify messages between driver client instance
and MEI client.
The driver also checks readiness of the device. The number
of simultaneously opened instances is limited to 253.
(255 - (amthi + watchdog))
Release:
In release the driver sends a Disconnect Command to
ME feature and clean all the data structs.
IOCTL:
MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT)
The IOCTL links the current file descriptor to ME feature.
This is done by sending MEI Bus command: 'hbm_client_connect_request'
to the ME and waiting for an answer :'hbm_client_connect_response'.
Upon answer reception the driver updates its and HOST data
structures in file structure to indicate that the file
descriptor is associated to ME feature.
Each ME feature is represented by UUID which is given as
an input parameter to the IOCTL, upon success connect command the
IOCTL will return the ME feature properties.
ME can reject CONNECT commands due to several reasons,
most common are:
Invalid UUID ME or feature does not exists in ME.
No More Connection allowed to this is feature,
usually only one connection is allowed.
Write:
Upon write, the driver splits the user data into several MEI
messages up to 512 bytes each and sends it to the HW.
If the user wants to write data to AMTHI ME feature then the
drivers routes the messages through AMTHI queues.
Read:
In read the driver checks is a connection exists to
current file descriptor and then wait until a data is available.
Message might be received (by interrupt from ME) in multiple chunks.
Only complete message is released to the application.
Poll:
Nothing special here. Waiting for see if we have
data available for reading.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com>
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
