Commit graph

106454 commits

Author SHA1 Message Date
Sergei Shtylyov
84b47e3b16 sata_dwc_460ex: fix misuse of ata_get_cmd_descript()
The driver erroneously uses ata_get_cmd_descript() not only for printing out
the ATA commands but also the protocol and DMA direction enums. Add functions
for properly printing those out...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02 02:36:46 -05:00
Sergei Shtylyov
d285e8bfe9 sata_dwc_460ex: fix return value of dma_dwc_xfer_setup()
The caller expects this function to return the DMA channel number on success,
while it returns 0...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02 02:36:46 -05:00
Sergei Shtylyov
c211962dc1 sata_dwc_460ex: fix compilation errors/warnings
Fix the following compilation errors/warnings:

drivers/ata/sata_dwc_460ex.c:43:1: warning: "DRV_NAME" redefined
In file included from drivers/ata/sata_dwc_460ex.c:38:
drivers/ata/libata.h:31:1: warning: this is the location of the previous
definition
drivers/ata/sata_dwc_460ex.c:44:1: warning: "DRV_VERSION" redefined
drivers/ata/libata.h:32:1: warning: this is the location of the previous
definition
drivers/ata/sata_dwc_460ex.c: In function `sata_dwc_exec_command_by_tag':
drivers/ata/sata_dwc_460ex.c:1356: warning: passing argument 1 of
`ata_get_cmd_descript' makes integer from pointer without a cast
drivers/ata/sata_dwc_460ex.c: In function `sata_dwc_qc_issue':
drivers/ata/sata_dwc_460ex.c:1476: warning: `err' is used uninitialized in this
function
drivers/ata/sata_dwc_460ex.c:1465: note: `err' was declared here
drivers/ata/sata_dwc_460ex.c: In function `sata_dwc_qc_issue':
drivers/ata/sata_dwc_460ex.c:1493: warning: passing argument 1 of
`ata_get_cmd_descript' makes integer from pointer without a cast
drivers/ata/sata_dwc_460ex.c: In function `sata_dwc_qc_prep':
drivers/ata/sata_dwc_460ex.c:1537: error: `tag' undeclared (first use in this
function)
drivers/ata/sata_dwc_460ex.c:1537: error: (Each undeclared identifier is
reported only once
drivers/ata/sata_dwc_460ex.c:1537: error: for each function it appears in.)

NB: error only happens if DEBUG_NCQ macro is defined...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02 02:36:45 -05:00
Sergei Shtylyov
b83a4c3979 sata_dwc_460ex: use ATA_PIO4
Somehow the driver was committed with a bare number for the PIO mask, instead
of ATA_PIO4...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02 02:36:45 -05:00
Jeff Garzik
4fca377f74 [libata] trivial: trim trailing whitespace for drivers/ata/*.[ch] 2011-03-02 02:36:45 -05:00
James Bottomley
00dd4998a6 libsas: convert to libata new error handler
The conversion is quite complex given that the libata new error
handler has to be hooked into the current libsas timeout and error
handling.  The way this is done is to process all the failed commands
via libsas first, but if they have no underlying sas task (and they're
on a sata device) assume they are destined for the libata error
handler and send them accordingly.

Finally, activate the port recovery of the libata error handler for
each port known to the host.  This is somewhat suboptimal, since that
port may not need recovering, but given the current architecture of
the libata error handler, it's the only way; and the spurious
activation is harmless.

Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02 02:36:45 -05:00
James Bottomley
0e0b494ca8 libata: separate error handler into usable components
Right at the moment, the libata error handler is incredibly
monolithic.  This makes it impossible to use from composite drivers
like libsas and ipr which have to handle error themselves in the first
instance.

The essence of the change is to split the monolithic error handler
into two components: one which handles a queue of ata commands for
processing and the other which handles the back end of readying a
port.  This allows the upper error handler fine grained control in
calling libsas functions (and making sure they only get called for ATA
commands whose lower errors have been fixed up).

Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02 02:36:45 -05:00
James Bottomley
c34aeebc06 libata: fix eh locking
The SCSI host eh_cmd_q should be protected by the host lock (not the
port lock).  This probably doesn't matter that much at the moment,
since we try to serialise the add and eh pieces, but it might matter
in future for more convenient error handling.  Plus this switches
libata to the standard eh pattern where you lock, remove from the cmd
queue to a local list and unlock and then operate on the local list.

Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02 02:36:45 -05:00
James Bottomley
a29b5dad46 libata: fix locking for sas paths
For historical reasons, libsas uses the scsi host lock as the ata port
lock, and libata always uses the ata host.  For the old eh, this was
largely irrelevant since the two locks were never mixed inside the
code.  However, the new eh has a case where it nests acquisition of
the host lock inside the port lock (this does look rather deadlock
prone).  Obviously this would be an instant deadlock if the port lock
were the host lock, so switch the libsas paths to use the ata host
lock as well.

Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02 02:36:45 -05:00
James Bottomley
238c9cf9ea libata: plumb sas port scan into standard libata paths
The function ata_sas_port_init() has always really done its own thing.
However, as a precursor to moving to the libata new eh, it has to be
properly using the standard libata scan paths.  This means separating
the current libata scan paths into pieces which can be shared with
libsas and pieces which cant (really just the async call and the host
scan).

Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02 02:36:45 -05:00
Tejun Heo
eb0e85e36b libata: fix hotplug for drivers which don't implement LPM
ata_eh_analyze_serror() suppresses hotplug notifications if LPM is
being used because LPM generates spurious hotplug events.  It compared
whether link->lpm_policy was different from ATA_LPM_MAX_POWER to
determine whether LPM is enabled; however, this is incorrect as for
drivers which don't implement LPM, lpm_policy is always
ATA_LPM_UNKNOWN.  This disabled hotplug detection for all drivers
which don't implement LPM.

Fix it by comparing whether lpm_policy is greater than
ATA_LPM_MAX_POWER.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02 02:34:20 -05:00
Linus Torvalds
3e1f2356ce Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (adt7411) add MODULE_DEVICE_TABLE
  hwmon: (ad7414) add MODULE_DEVICE_TABLE
2011-02-28 18:09:02 -08:00
Rafael J. Wysocki
af06216a8e ACPI: Fix build for CONFIG_NET unset
Several ACPI drivers fail to build if CONFIG_NET is unset, because
they refer to things depending on CONFIG_THERMAL that in turn depends
on CONFIG_NET.  However, CONFIG_THERMAL doesn't really need to depend
on CONFIG_NET, because the only part of it requiring CONFIG_NET is
the netlink interface in thermal_sys.c.

Put the netlink interface in thermal_sys.c under #ifdef CONFIG_NET
and remove the dependency of CONFIG_THERMAL on CONFIG_NET from
drivers/thermal/Kconfig.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Len Brown <lenb@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Luming Yu <luming.yu@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-28 18:00:31 -08:00
Linus Torvalds
dbc39ec4b6 Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: fix unsigned vs signed comparison issue in modeset ctl ioctl.
  drm/nv50-nvc0: make sure vma is definitely unmapped when destroying bo
2011-02-28 17:58:09 -08:00
Dave Airlie
467a29ea5a Merge remote branch 'nouveau/drm-nouveau-fixes' of /ssd/git/drm-nouveau-next into drm-fixes
* 'nouveau/drm-nouveau-fixes' of /ssd/git/drm-nouveau-next:
  drm/nv50-nvc0: make sure vma is definitely unmapped when destroying bo
2011-02-28 15:35:16 +10:00
Dave Airlie
1922756124 drm: fix unsigned vs signed comparison issue in modeset ctl ioctl.
This fixes CVE-2011-1013.

Reported-by: Matthiew Herrb (OpenBSD X.org team)
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-28 15:24:35 +10:00
Ben Skeggs
7db2662325 drm/nv50-nvc0: make sure vma is definitely unmapped when destroying bo
Somehow fixes a misrendering + hang at GDM startup on my NVA8...

My first guess would have been stale TLB entries laying around that a new
bo then accidentally inherits.  That doesn't make a great deal of sense
however, as when we mapped the pages for the new bo the TLBs would've
gotten flushed anyway.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-02-28 15:00:16 +10:00
axel lin
a7254d68b6 hwmon: (adt7411) add MODULE_DEVICE_TABLE
The device table is required to load modules based on modaliases.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-26 08:59:32 -08:00
axel lin
6407deb594 hwmon: (ad7414) add MODULE_DEVICE_TABLE
The device table is required to load modules based on modaliases.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-26 08:59:32 -08:00
Alexandre Bounine
fe41947e1a rapidio: fix sysfs config attribute to access 16MB of maint space
Fixes sysfs config attribute to allow access to entire 16MB maintenance
space of RapidIO devices.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-25 15:07:37 -08:00
Alexander Gordeev
99b0d365e5 pps: initialize ts_real properly
Initialize ts_real.flags to fix compiler warning about possible
uninitialized use of this field.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-25 15:07:37 -08:00
Lei Xu
a2d6d2fa90 drivers/rtc/rtc-ds3232.c: fix time range difference between linux and RTC chip
In linux rtc_time struct, tm_mon range is 0~11, tm_wday range is 0~6,
while in RTC HW REG, month range is 1~12, day of the week range is 1~7,
this patch adjusts difference of them.

The efect of this bug was that most of month will be operated on as the
next month by the hardware (When in Jan it maybe even worse).  For
example, if in May, software wrote 4 to the hardware, which handled it as
April.  Then the logic would be different between software and hardware,
which would cause weird things to happen.

Signed-off-by: Lei Xu <B33228@freescale.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Jack Lan <jack.lan@freescale.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-25 15:07:37 -08:00
Matti J. Aaltonen
ac3c830419 drivers/nfc/pn544.c: add missing regulator
The regulator framework is used for power management.  The regulators are
only named in the driver code, the actual control stuff is in the board
file for each architecture or use case.

The PN544 chip has three regulators that can be controlled or not -
depending on the architecture where the chip is being used.  So some of
the regulators may not be controllable.  In our current case the third
regulator, which was missing from the code, went unnoticed because we
didn't need to control it.  To be as general as possible - in this respect
- the driver needs to list all regulators.  Then the board file can be
used to actually set the usage.

Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-25 15:07:36 -08:00
Matti J. Aaltonen
d73fa4b914 drivers/nfc/Kconfig: use full form of the NFC acronym
Spell out the NFC acronym when it's shown for the first time.

Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-25 15:07:36 -08:00
Linus Torvalds
6366213ee3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
  regulator, mc13xxx: Remove pointless test for unsigned less than zero
  regulator: Fix warning with CONFIG_BUG disabled
2011-02-25 14:04:44 -08:00
Jelle Martijn Kok
d40358509e RTC: fix typo in drivers/rtc/rtc-at91sam9.c
The member of the rtc_class_ops struct is called alarm_irq_enable and
not alarm_irq_enabled

CC: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jelle Martijn Kok <jmkok@youcom.nl>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-25 14:00:56 -08:00
Linus Torvalds
c1bc3beb06 Merge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  usb: musb: core: set has_tt flag
  USB: xhci: mark local functions as static
  USB: xhci: fix couple sparse annotations
  USB: xhci: rework xhci_print_ir_set() to get ir set from xhci itself
  USB: Reset USB 3.0 devices on (re)discovery
  xhci: Fix an error in count_sg_trbs_needed()
  xhci: Fix errors in the running total calculations in the TRB math
  xhci: Clarify some expressions in the TRB math
  xhci: Avoid BUG() in interrupt context
2011-02-25 11:14:44 -08:00
Linus Torvalds
638691a7a4 Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md:
  md: Fix - again - partition detection when array becomes active
  Fix over-zealous flush_disk when changing device size.
  md: avoid spinlock problem in blk_throtl_exit
  md: correctly handle probe of an 'mdp' device.
  md: don't set_capacity before array is active.
  md: Fix raid1->raid0 takeover
2011-02-25 11:13:26 -08:00
Jesper Juhl
4b2f67d756 regulator, mc13xxx: Remove pointless test for unsigned less than zero
The variable 'val' is a 'unsigned int', so it can never be less than zero.
This fact makes the "val < 0" part of the test done in BUG_ON() in
mc13xxx_regulator_get_voltage() rather pointles since it can never have
any effect.
This patch removes the pointless test.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-25 08:51:07 +00:00
Mark Brown
9ee291a453 regulator: Fix warning with CONFIG_BUG disabled
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-25 08:51:05 +00:00
Linus Torvalds
4662db4461 Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/i915: Fix unintended recursion in ironlake_disable_rc6
  drm/i915: fix corruptions on i8xx due to relaxed fencing
  drm/i915: skip FDI & PCH enabling for DP_A
  agp/intel: Experiment with a 855GM GWB bit
  drm/i915: don't enable FDI & transcoder interrupts after all
  drm/i915: Ignore a hung GPU when flushing the framebuffer prior to a switch
2011-02-24 17:08:48 -08:00
Dave Airlie
3c0556e967 Merge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel into drm-fixes
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
  drm/i915: Fix unintended recursion in ironlake_disable_rc6
2011-02-25 08:40:26 +10:00
Felipe Balbi
ec95d35a6b usb: musb: core: set has_tt flag
MUSB is a non-standard host implementation which
can handle all speeds with the same core. We need
to set has_tt flag after commit
d199c96d41 (USB: prevent
buggy hubs from crashing the USB stack) in order for
MUSB HCD to continue working.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Cc: stable <stable@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Michael Jones <michael.jones@matrix-vision.de>
Tested-by: Alexander Holler <holler@ahsoftware.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-24 11:16:24 -08:00
Chris Wilson
995073072c drm/i915: Fix unintended recursion in ironlake_disable_rc6
After disabling, we're meant to teardown the bo used for the contexts,
not recurse into ourselves again and preventing module unload.

Reported-and-tested-by: Ben Widawsky <bwidawsk@gmail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-24 17:16:43 +00:00
NeilBrown
f0b4f7e2f2 md: Fix - again - partition detection when array becomes active
Revert
    b821eaa572
and
    f3b99be19d

When I wrote the first of these I had a wrong idea about the
lifetime of 'struct block_device'.  It can disappear at any time that
the block device is not open if it falls out of the inode cache.

So relying on the 'size' recorded with it to detect when the
device size has changed and so we need to revalidate, is wrong.

Rather, we really do need the 'changed' attribute stored directly in
the mddev and set/tested as appropriate.

Without this patch, a sequence of:
   mknod / open / close / unlink

(which can cause a block_device to be created and then destroyed)
will result in a rescan of the partition table and consequence removal
and addition of partitions.
Several of these in a row can get udev racing to create and unlink and
other code can get confused.

With the patch, the rescan is only performed when needed and so there
are no races.

This is suitable for any stable kernel from 2.6.35.

Reported-by: "Wojcik, Krzysztof" <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@kernel.org
2011-02-24 17:26:41 +11:00
NeilBrown
93b270f76e Fix over-zealous flush_disk when changing device size.
There are two cases when we call flush_disk.
In one, the device has disappeared (check_disk_change) so any
data will hold becomes irrelevant.
In the oter, the device has changed size (check_disk_size_change)
so data we hold may be irrelevant.

In both cases it makes sense to discard any 'clean' buffers,
so they will be read back from the device if needed.

In the former case it makes sense to discard 'dirty' buffers
as there will never be anywhere safe to write the data.  In the
second case it *does*not* make sense to discard dirty buffers
as that will lead to file system corruption when you simply enlarge
the containing devices.

flush_disk calls __invalidate_devices.
__invalidate_device calls both invalidate_inodes and invalidate_bdev.

invalidate_inodes *does* discard I_DIRTY inodes and this does lead
to fs corruption.

invalidate_bev *does*not* discard dirty pages, but I don't really care
about that at present.

So this patch adds a flag to __invalidate_device (calling it
__invalidate_device2) to indicate whether dirty buffers should be
killed, and this is passed to invalidate_inodes which can choose to
skip dirty inodes.

flusk_disk then passes true from check_disk_change and false from
check_disk_size_change.

dm avoids tripping over this problem by calling i_size_write directly
rathher than using check_disk_size_change.

md does use check_disk_size_change and so is affected.

This regression was introduced by commit 608aeef17a which causes
check_disk_size_change to call flush_disk, so it is suitable for any
kernel since 2.6.27.

Cc: stable@kernel.org
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Andrew Patterson <andrew.patterson@hp.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-02-24 17:25:47 +11:00
Linus Torvalds
78794b2cde Revert "Bluetooth: Enable USB autosuspend by default on btusb"
This reverts commit 556ea928f7.

Jeff Chua reports that it can cause some bluetooth devices (he mentions
an Bluetooth Intermec scanner) to just stop responding after a while
with messages like

  [ 4533.361959] btusb 8-1:1.0: no reset_resume for driver btusb?
  [ 4533.361964] btusb 8-1:1.1: no reset_resume for driver btusb?

from the kernel. See also

  https://bugzilla.kernel.org/show_bug.cgi?id=26182

for other reports.

Reported-by: Jeff Chua <jeff.chua.linux@gmail.com>
Reported-by: Andrew Meakovski <meako@bigmir.net>
Reported-by: Jim Faulkner <jfaulkne@ccs.neu.edu>
Acked-by: Greg KH <gregkh@suse.de>
Acked-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Cc: stable@kernel.org (for 2.6.37)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-23 19:42:03 -08:00
Dave Airlie
fbf92bea68 Merge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel into drm-fixes
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
  drm/i915: fix corruptions on i8xx due to relaxed fencing
  drm/i915: skip FDI & PCH enabling for DP_A
  agp/intel: Experiment with a 855GM GWB bit
  drm/i915: don't enable FDI & transcoder interrupts after all
  drm/i915: Ignore a hung GPU when flushing the framebuffer prior to a switch
2011-02-24 12:19:43 +10:00
Daniel Vetter
c2e0eb1670 drm/i915: fix corruptions on i8xx due to relaxed fencing
It looks like gen2 has a peculiar interleaved 2-row inter-tile
layout. Probably inherited from i81x which had 2kb tiles (which
naturally fit an even-number-of-tile-rows scheme to fit onto 4kb
pages). There is no other mention of this in any docs (also not
in the Intel internal documention according to Chris Wilson).

Problem manifests itself in corruptions in the second half of the
last tile row (if the bo has an odd number of tiles). Which can
only happen with relaxed tiling (introduced in a00b10c360).

So reject set_tiling calls that don't satisfy this constrain to
prevent broken userspace from causing havoc. While at it, also
check the size for newer chipsets.

LKML: https://lkml.org/lkml/2011/2/19/5
Reported-by: Indan Zupancic <indan@nul.nu>
Tested-by: Indan Zupancic <indan@nul.nu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-24 00:33:49 +00:00
Linus Torvalds
ef3242859f Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (33 commits)
  Added support for usb ethernet (0x0fe6, 0x9700)
  r8169: fix RTL8168DP power off issue.
  r8169: correct settings of rtl8102e.
  r8169: fix incorrect args to oob notify.
  DM9000B: Fix PHY power for network down/up
  DM9000B: Fix reg_save after spin_lock in dm9000_timeout
  net_sched: long word align struct qdisc_skb_cb data
  sfc: lower stack usage in efx_ethtool_self_test
  bridge: Use IPv6 link-local address for multicast listener queries
  bridge: Fix MLD queries' ethernet source address
  bridge: Allow mcast snooping for transient link local addresses too
  ipv6: Add IPv6 multicast address flag defines
  bridge: Add missing ntohs()s for MLDv2 report parsing
  bridge: Fix IPv6 multicast snooping by correcting offset in MLDv2 report
  bridge: Fix IPv6 multicast snooping by storing correct protocol type
  p54pci: update receive dma buffers before and after processing
  fix cfg80211_wext_siwfreq lock ordering...
  rt2x00: Fix WPA TKIP Michael MIC failures.
  ath5k: Fix fast channel switching
  tcp: undo_retrans counter fixes
  ...
2011-02-23 16:02:00 -08:00
Linus Torvalds
b5f7376eb3 Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  amd64-agp: fix crash at second module load
  drm/radeon: fix regression with AA resolve checking
  drm: drop commented out code and preceding comment
  drm/vblank: Enable precise vblank timestamps for interlaced and doublescan modes.
  drm/vblank: Use memory barriers optimized for atomic_t instead of generics.
  drm/vblank: Use abs64(diff_ns) for s64 diff_ns instead of abs(diff_ns)
  drm/radeon/kms: align height of fb allocation.
  Revert "drm/radeon/kms: switch back to min->max pll post divider iteration"
2011-02-23 15:51:26 -08:00
David S. Miller
518d020a18 Merge branch 'r8169-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6 2011-02-23 15:03:11 -08:00
Linus Torvalds
57949e8006 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: serio/gameport - use 'long' system workqueue
  Input: synaptics - document 0x0c query
  Input: tegra-kbc - add function keymap
2011-02-23 14:44:25 -08:00
Shahar Havivi
67158cebde Added support for usb ethernet (0x0fe6, 0x9700)
The device is very similar to (0x0fe6, 0x8101),
And works well with dm9601 driver.

Signed-off-by: Shahar Havivi <shaharh@redhat.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23 14:32:28 -08:00
Hayes Wang
5d2e19572a r8169: fix RTL8168DP power off issue.
- fix the RTL8111DP turn off the power when DASH is enabled.
- RTL_GIGA_MAC_VER_27 must wait for tx finish before reset.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
2011-02-23 23:31:17 +01:00
Hayes Wang
d24e9aafe5 r8169: correct settings of rtl8102e.
Adjust and remove certain settings of RTL8102E which are for previous chips.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-off-by: Francois Romieu <romieu@fr.zoreil.com>
2011-02-23 23:31:03 +01:00
Hayes Wang
fac5b3caa1 r8169: fix incorrect args to oob notify.
It results in the wrong point address and influences RTL8168DP.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
2011-02-23 23:30:30 +01:00
Henry Nestler
108f518cc4 DM9000B: Fix PHY power for network down/up
DM9000 revision B needs 1 ms delay after PHY power-on.
PHY must be powered on by writing 0 into register DM9000_GPR before
all other settings will change (see Davicom spec and example code).

Remember, that register DM9000_GPR was not changed by reset sequence.

Without this fix the FIFO is out of sync and sends wrong data after
sequence of "ifconfig ethX down ; ifconfig ethX up".

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23 14:29:50 -08:00
Henry Nestler
8dde924217 DM9000B: Fix reg_save after spin_lock in dm9000_timeout
The spin_lock should hold before reading register.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23 14:29:49 -08:00
Dmitry Torokhov
1d64b655dc Input: serio/gameport - use 'long' system workqueue
Commit 8ee294cd9d converted serio
subsystem event handling from using a dedicated thread to using
common workqueue. Unfortunately, this regressed our boot times,
due to the fact that serio jobs take long time to execute. While
the new concurrency managed workqueue code manages long-playing
works just fine and schedules additional workers as needed, such
works wreck havoc among remaining users of flush_scheduled_work().

To solve this problem let's move serio/gameport works from system_wq
to system_long_wq which nobody tries to flush.

Reported-and-tested-by: Hernando Torque <pantherchen@versanet.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-23 08:53:07 -08:00