Commit graph

1593 commits

Author SHA1 Message Date
Mike Frysinger
e50e2f25c5 Blackfin: initial regset support
We don't support core dumps (yet?), but this should make things easier.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:51 -05:00
Mike Frysinger
f2ce48024a Blackfin: simplify PTRACE_{PEEK,POKE}USR in preperation for regset support
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:51 -05:00
Mike Frysinger
5f09c77d2a Blackfin: simplify SYSCFG code a bit and ignore attempts to change it
We don't want to let user space modify the SYSCFG register arbitrarily as
the settings are system wide (SNEN/CNEN) and can cause misbehavior.  The
only other bit here (SSSTEP) has proper controls via PTRACE_SINGLESTEP.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:51 -05:00
Christoph Hellwig
f5b99627a3 Blackfin: use generic ptrace_resume code
Use the generic ptrace_resume code for PTRACE_SYSCALL, PTRACE_CONT,
PTRACE_KILL and PTRACE_SINGLESTEP.  This implies defining
arch_has_single_step in <asm/ptrace.h> and implementing the
user_enable_single_step and user_disable_single_step functions, which
also causes the breakpoint information to be cleared on fork, which
could be considered a bug fix.

Also the TIF_SYSCALL_TRACE thread flag is now cleared on PTRACE_KILL
which it previously wasn't which is consistent with all architectures
using the modern ptrace code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:51 -05:00
Barry Song
ad6720c0b5 Blackfin: bf537-stamp: add example AD715{0,2}/AD774{5,6,7} IIO resources
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:51 -05:00
Graf Yang
718340f629 Blackfin: rewrite resync_core_{i,d}cache() SMP logic to avoid per_cpu data
This functions are implicitly called by core functions like cpu_relax(),
and since those functions may be called early on before common code has
initialized the per-cpu data area, we need to tweak the stats gathering.
Now the statistics are maintained in common bss which makes these funcs
safe to use as soon as the C runtime env is setup.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:50 -05:00
Graf Yang
6c2b7072a7 Blackfin: add support for cpufreq on SMP systems
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:50 -05:00
Barry Song
3b82790c12 Blackfin: rename AD1938 to AD193X in board files
The ASoC codec driver was generalized and renamed, so update the board
resources accordingly.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:50 -05:00
Yi Li
7136d9c5e8 Blackfin: add CALLER_ADDR ftrace macros
Since GCC doesn't support __builtin_frame_address(n) where n!=0, add our
own function to walk the stack frame pointers.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:50 -05:00
Mike Frysinger
652afdc340 Blackfin: move KGDB selection to the way other arches do it
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:50 -05:00
Graf Yang
64b33a00dc Blackfin: split watchdog definitions into a dedicated header file
This allows things to be shared between the different watchdog sources.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:50 -05:00
Barry Song
4ab069e535 Blackfin: add dma_disable_irq_nosync() API for irq handlers
Some IRQ handlers need to disable a DMA channel without waiting.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:50 -05:00
Mike Frysinger
3750411fb7 Blackfin: fix whitespace damage in thread_info.h
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:50 -05:00
Mike Frysinger
b73faf7449 Blackfin: support new ftrace frame pointer semantics
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:50 -05:00
Mike Frysinger
aebfef0324 Blackfin: implement ftrace mcount test
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:50 -05:00
Barry Song
6388d14eb2 Blackfin: implement ndelay()
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:50 -05:00
Graf Yang
60ffdb3654 Blackfin: implement nmi_watchdog for SMP on BF561
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:49 -05:00
Barry Song
726e96561e Blackfin: respect the L1 kconfig optimization in the MPU code
Restore support for CONFIG_EXCPT_IRQ_SYSC_L1 in the MPU CPLB manager.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:49 -05:00
Barry Song
336746ed8e Blackfin: bf537-stamp/bf527-ezkit: move ASoC SPORT resources to boards file
Rather than declaring pin resources in the drivers, do it in the board.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:49 -05:00
Barry Song
439b486746 Blackfin: bf548-ezkit: add ASoC CPU DAI resources
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:49 -05:00
Michael Hennerich
f3dec78333 Blackfin: increase NR_IRQS beyond NR on-chip IRQs
This makes room for off-chip IRQ controllers.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:49 -05:00
Barry Song
5e8d3210b5 Blackfin: fill out the signal si_addr when sending a SIGBUS/SIGSEGV
Some userspace applications use this member in diagnosing crashes.  It
also makes some LTP tests pass (i.e. the Blackfin arch behaves more like
everyone else).

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:49 -05:00
Mike Frysinger
0531c467da Blackfin: bf537-stamp: move ADF7021 MAC storage into platform resources
Just generate a random MAC on the demo board since the ADF702x lacks
dedicated storage for such things.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:49 -05:00
Yi Li
441504df6b Blackfin: add support for irqflags tracing
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:49 -05:00
Harald Krapfenbauer
5aff1642ae Blackfin: tcm-bf518: new board port
Signed-off-by: Harald Krapfenbauer <harald.krapfenbauer@bluetechnix.at>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:49 -05:00
Barry Song
38e7673f24 Blackfin: bf537-stamp: declare parallel flash as ROM with XIP kernel
When the kernel is executing out of parallel flash (XIP), we can't have
the flash go into an erase/programming cycle, otherwise the instruction
fetching steps fail and everything crashes.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:49 -05:00
Cliff Cai
29bb3bc0c7 Blackfin: bf527-ezkit/bf537-stamp: add example SSM2602 I2C resources
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:49 -05:00
Graf Yang
c6669c223a Blackfin: fix up mm locking in address dumping
The locking code in the address dumper needs to grab the mm's mmap_sem
so that other CPUs do not get an inconsistent view.  On UP systems this
really wasn't a problem, but it is easy to trigger a race on SMP systems
when another CPU removes a mapping.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:49 -05:00
Barry Song
7e1082b7db Blackfin: bf533-{ezkit,stamp}: add sound platform devices
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Mike Frysinger
8d0177dbcb Blackfin: kgdb: mark all local funcs/structs static
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Roel Kluin
48a74f9d1b Blackfin: fix decoding of opcodes 41-47 in decode_instruction()
This condition allowed only decoding of opcode 0x0040

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Barry Song
d86bfb1600 Blackfin: initial XIP support
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Barry Song
aad16f3228 Blackfin: fix initial stack pointer setup
During very early init, the stack pointer is given a slightly incorrect
value (&init_thread_union).  The value is later adjusted to the right one
during early init (&init_thread_union + THREAD_SIZE), but it is used a few
times in between.  While the few functions used don't actually put things
onto the stack (due to optimization), it's best if we simply use the right
value from the start.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Barry Song
8916a1499d Blackfin: fix the section name of init_thread_union
Use the common attribute rather than setting the section name directly.
The common linker script defines expect the newer naming.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Barry Song
6feda3a653 Blackfin: replace harcoded define with proper THREAD_SIZE macro
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Jie Zhang
0afc272cc6 Blackfin: fix relocation errors with large initramfs images
Since we are now discarding .exit.text at runtime instead of link time, we
need to place all .text sections ahead of the .data sections.  Otherwise,
a really large attached initramfs may cause link errors as it pushes the
PC relative relocations behind the limits of the Blackfin ISA (~16meg).
The instructions in the .exit.text are unable to call back into the .text
sections leading to a link failure.

Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Yi Li
cb191718fc Blackfin: try to simplify interrupt ifdef ugliness
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Yi Li
54536c5c6a Blackfin: simplify SMP handling in SRAM code
There is no need to use {get,put}_cpu() when we already have a spinlock to
protect against multiple processors running simultaneously.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Graf Yang
0b39db28b9 Blackfin: SMP: add PM/CPU hotplug support
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Yi Li
0d152c27e3 Blackfin: SMP: make core timers per-cpu clock events for HRT
SMP systems require per-cpu local clock event devices in order to enable
HRT support.  One a BF561, we can use local core timer for this purpose.
Originally, there was one global core-timer clock event device set up for
core A.

To accomplish this feat, we need to split the gptimer0/core timer logic
so that each is a standalone clock event.  There is no requirement that
we only have one clock event source anyways.  Once we have this, we just
define per-cpu clock event devices for each local core timer.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Graf Yang
682f5dc4ed Blackfin: drop cpu_callin_map on SMP systems
Common API already provides functions for managing online CPUs.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:47 -05:00
Sonic Zhang
0325f25a91 Blackfin: SMP: add support for IRQ affinity
Now that the Blackfin IRQ controller supports this, drivers get the normal
functionality of controlling which CPU to bind IRQs to.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:47 -05:00
Mike Frysinger
69e1d8a61d Blackfin: unify MMR helpers
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:47 -05:00
Mike Frysinger
f05ede3a94 Blackfin: isram: add unlikely to sanity checks
Don't want the compiler assuming the rare sanity checks are the norm and
optimize for those paths.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:47 -05:00
Sonic Zhang
0ea19c64e3 Blackfin: update defconfigs
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:47 -05:00
Michael Hennerich
0f7b468b6e Blackfin: add optimized version of Hamming Weight functions
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:47 -05:00
Valentin Yakovenkov
252077cf7d Blackfin: bf561-acvilon: save the smsc911x mac address
Signed-off-by: Valentin Yakovenkov <yakovenkov@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:47 -05:00
Sonic Zhang
7a9cc48907 Blackfin: bf537-stamp: unify duplicated ADP5588 headers
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:47 -05:00
Mike Frysinger
01218654cd Blackfin: bf537-stamp: change CONFIG_USB_SL811_BFIN_IRQ to IRQ_PF4
The Kconfig option was never mainlined, so replace the define with the
actual pin that it is hooked up to by default.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:47 -05:00
Mike Frysinger
3b781de6dd Blackfin: drop unused SL811 platform resources from bf527/pnav boards
These platforms don't hook up to this USB controller, so no point in
declaring resources for it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:47 -05:00
Michael Hennerich
1dafdc513a Blackfin: BF51x: fix L1 Instruction SRAM size
The BF51x's Instruction SRAM is 32kB, not 48kB.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:47 -05:00
Michael Hennerich
244d34230b Blackfin: update AD7879 resources to match the new gpiolib driver support
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:46 -05:00
Michael Hennerich
edd0799250 Blackfin: gpio: use shorter name
The gpio label size is 16 char, but the current code uses a longer name
resulting in chopped display.  So use a shorter name.

Reported-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:46 -05:00
Michael Hennerich
15435a2a55 Blackfin: pull in asm/bfin_can.h for interrupt masks
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:46 -05:00
Sonic Zhang
a3a6a59019 Blackfin: dma-mapping: fix thinko in constant optimization
Make sure the non-constant version of the dma_sync functions actually
complete instead of recursively calling itself forever.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:46 -05:00
Mike Frysinger
0c270807db Blackfin: drop duplicate HOTPLUG Kconfig option
The option already exists for everyone in init/Kconfig.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:46 -05:00
Mike Frysinger
0e64268ced Blackfin: merge common CAN defines into one headers
Rather than copy and paste the MMR defines and register layout,
consolidate everything in one place.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:46 -05:00
Mike Frysinger
360adee8a5 Blackfin: wire up the various memory related syscalls
These all just go to the stub syscall at the moment, so this is largely
future proofing.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:46 -05:00
Graf Yang
ead9b1156d Blackfin: SMP: enable HAVE_LEGACY_PER_CPU_AREA
The current Blackfin SMP code relies on the legacy cpu area code, so
select it until we port things to the newer code.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:46 -05:00
Sonic Zhang
5792ab2a0a Blackfin: MPU: handle caches for reserved memory
We weren't handling the user-specified cache behavior for the reserved
memory regions (via mem=/max_mem=).  The no-MPU code already takes care
of this, so add support to the MPU code as well.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:46 -05:00
Michael Hennerich
d94a1aa44e Blackfin: extend bfin-lq035q1-fb resources to include PPI mode
This lets us support the new BF527-EZKIT V2.1 via platform resources
tweaks only.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:46 -05:00
Michael Hennerich
6924dfb058 Blackfin: bf527-ezkit: add support for V2.1 boards
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:46 -05:00
Barry Song
e18e7dd334 Blackfin: fix MPU page permission masks overflow when dealing with async memory
Attempting to use the MPU while doing XIP out of parallel flash hooked up
to the async memory bus would often result in random crashes as the MPU
slowly corrupted memory.

The fallout here is that the async banks gain MPU protection from user
space too.  So any accesses have to go through the mmap() interface rather
than just using hardcoded pointers.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:46 -05:00
Yi Li
c9784ebb23 Blackfin: flush caches on SMP when one core calls another via IPI
Sometimes a SMP system will randomly panic at boot.  This is due to caches
being out of sync when one core tries to signal the other.  So when one
core calls another via IPI, flush the data caches.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:45 -05:00
Mike Frysinger
3630ac34b0 Blackfin: bfin_sport: unify & standardize SPORT masks
Rather than have every SPORT driver copy & paste things, declare the C
structure and MMR bitmasks in one place for everyone to use.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:45 -05:00
Sonic Zhang
c13ce9fd26 Blackfin: add UART/SPORT early platform resources
This lets people easily select the UART/SPORT consoles for early printk
while leveraging the pins declared in the boards file.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:45 -05:00
Sonic Zhang
b635f1912d Blackfin: allow boards to register early devices
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:45 -05:00
Sonic Zhang
df5de26130 Blackfin: move SPORT UART resources to boards files
Rather than keeping the pins in the actual driver and worrying about a
mess of Kconfig options, declare all the desired pin resources in the
boards file.  This lets people easily select the specific pins/ports for
the normal emulated UART as well as GPIOs for CTS/RTS.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:45 -05:00
Barry Song
08a54bffaf Blackfin: bf537-stamp: ad1938: switch to GPIO CS
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:45 -05:00
Sonic Zhang
6bd1fbea2e Blackfin: move on-chip UART resources to boards files
Rather than keeping the pins in the actual driver and worrying about a
mess of Kconfig options, declare all the desired pin resources in the
boards file.  This lets people easily select the specific pins/ports for
the normal UART as well as GPIOs for CTS/RTS.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:45 -05:00
Jiri Kosina
318ae2edc3 Merge branch 'for-next' into for-linus
Conflicts:
	Documentation/filesystems/proc.txt
	arch/arm/mach-u300/include/mach/debug-macro.S
	drivers/net/qlge/qlge_ethtool.c
	drivers/net/qlge/qlge_main.c
	drivers/net/typhoon.c
2010-03-08 16:55:37 +01:00
Stefan Weil
947af29435 Fix spelling of 'platform' in comments and doc
Replace platfrom -> platform.

This is a frequent spelling bug.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-05 12:22:34 +01:00
Tejun Heo
ab386128f2 Merge branch 'master' into percpu 2010-02-02 14:38:15 +09:00
Sonic Zhang
7fe1a91281 blackfin,kgdb: Do not put PC in gdb_regs into retx.
In blackfin, kgdb is running in delayed exception IRQ5 other than in
exception IRQ3 directly.  Register reti other than retx in pt_regs is
the kgdb return address. So, don't put PC in gdb_regs into retx.

CC: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-01-07 11:58:37 -06:00
Jason Wessel
0fde663708 blackfin,kgdb,probe_kernel: Cleanup probe_kernel_read/write
Blackfin needs it own arch specific probe_kernel_read() and
probe_kernel_write().

This was moved out of the kgdb code and into the
arch/blackfin/maccess.c, because it is a generic kernel api.

The arch specific kgdb.c for blackfin was cleaned of all functions
which exist in the kgdb core that do the same thing after resolving
the probe_kernel_read() and probe_kernel_write().  This also
eliminated the need for most of the #include's.

CC: Sonic Zhang <sonic.adi@gmail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-07 11:58:36 -06:00
Mike Frysinger
04e4f2b18c FDPIC: Respect PT_GNU_STACK exec protection markings when creating NOMMU stack
The current code will load the stack size and protection markings, but
then only use the markings in the MMU code path.  The NOMMU code path
always passes PROT_EXEC to the mmap() call.  While this doesn't matter
to most people whilst the code is running, it will cause a pointless
icache flush when starting every FDPIC application.  Typically this
icache flush will be of a region on the order of 128KB in size, or may
be the entire icache, depending on the facilities available on the CPU.

In the case where the arch default behaviour seems to be desired
(EXSTACK_DEFAULT), we probe VM_STACK_FLAGS for VM_EXEC to determine
whether we should be setting PROT_EXEC or not.

For arches that support an MPU (Memory Protection Unit - an MMU without
the virtual mapping capability), setting PROT_EXEC or not will make an
important difference.

It should be noted that this change also affects the executability of
the brk region, since ELF-FDPIC has that share with the stack.  However,
this is probably irrelevant as NOMMU programs aren't likely to use the
brk region, preferring instead allocation via mmap().

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-06 18:16:02 -08:00
Tejun Heo
32032df6c2 Merge branch 'master' into percpu
Conflicts:
	arch/powerpc/platforms/pseries/hvCall.S
	include/linux/percpu.h
2010-01-05 09:17:33 +09:00
Linus Torvalds
5a865c0606 Merge branch 'for-33' of git://repo.or.cz/linux-kbuild
* 'for-33' of git://repo.or.cz/linux-kbuild: (29 commits)
  net: fix for utsrelease.h moving to generated
  gen_init_cpio: fixed fwrite warning
  kbuild: fix make clean after mismerge
  kbuild: generate modules.builtin
  genksyms: properly consider  EXPORT_UNUSED_SYMBOL{,_GPL}()
  score: add asm/asm-offsets.h wrapper
  unifdef: update to upstream revision 1.190
  kbuild: specify absolute paths for cscope
  kbuild: create include/generated in silentoldconfig
  scripts/package: deb-pkg: use fakeroot if available
  scripts/package: add KBUILD_PKG_ROOTCMD variable
  scripts/package: tar-pkg: use tar --owner=root
  Kbuild: clean up marker
  net: add net_tstamp.h to headers_install
  kbuild: move utsrelease.h to include/generated
  kbuild: move autoconf.h to include/generated
  drop explicit include of autoconf.h
  kbuild: move compile.h to include/generated
  kbuild: drop include/asm
  kbuild: do not check for include/asm-$ARCH
  ...

Fixed non-conflicting clean merge of modpost.c as per comments from
Stephen Rothwell (modpost.c had grown an include of linux/autoconf.h
that needed to be changed to generated/autoconf.h)
2009-12-17 07:23:42 -08:00
Linus Torvalds
525995d77c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (88 commits)
  Blackfin: Convert BUG() to use unreachable()
  Blackfin: define __NR_recvmmsg
  Blackfin: drop duplicate sched_clock
  Blackfin: NOMPU: skip DMA ICPLB hole when it is redundant
  Blackfin: MPU: add missing __init markings
  Blackfin: add support for TIF_NOTIFY_RESUME
  Blackfin: kgdb_test: clean up code a bit
  Blackfin: convert kgdbtest to proc_fops
  Blackfin: convert cyc2ns() to clocksource_cyc2ns()
  Blackfin: ip0x: pull in asm/portmux.h for P_xxx defines
  Blackfin: drop unused ax88180 resources
  Blackfin: bf537-stamp: add ADF702x network driver resources
  Blackfin: bf537-stamp: add CAN resources
  Blackfin: bf537-stamp: add AD5258 i2c address
  Blackfin: bf537-stamp: add adau1761 i2c address
  Blackfin: bf537-stamp: add adau1371 i2c address
  Blackfin: bf537-stamp: add ADP8870 resources
  Blackfin: bf537-stamp: kill AD714x board-specific Kconfigs
  Blackfin: bf537-stamp: update ADP5520 resources
  Blackfin: bf537-stamp: add ADXL346 orientation sensing support
  ...
2009-12-16 10:52:35 -08:00
Linus Torvalds
74f3ae7434 Merge branch 'module' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
* 'module' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  modpost: fix segfault with short symbol names
  module: handle ppc64 relocating kcrctabs when CONFIG_RELOCATABLE=y
  Kbuild: clear marker out of modpost
  module: make MODULE_SYMBOL_PREFIX into a CONFIG option
  ARM: unexport symbols used to implement floating point emulation
  ARM: use unified discard definition in linker script
  x86: don't export inline function
  sparc64: don't export static inline pci_ functions
2009-12-16 10:47:24 -08:00
Christoph Hellwig
698ba7b5a3 elf: kill USE_ELF_CORE_DUMP
Currently all architectures but microblaze unconditionally define
USE_ELF_CORE_DUMP.  The microblaze omission seems like an error to me, so
let's kill this ifdef and make sure we are the same everywhere.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: <linux-arch@vger.kernel.org>
Cc: Michal Simek <michal.simek@petalogix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 07:20:12 -08:00
Michael Hennerich
9cfe4a93e5 fbdev: bfin-lq035q1-fb: new Blackfin Landscape LCD EZ-Extender driver
Framebuffer driver for the Landscape LCD EZ-Extender (ADZS-BFLLCD-EZEXT)
http://docs.blackfin.uclinux.org/doku.php?id=hw:cards:landscape_lcd_ez-extender

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 07:20:01 -08:00
David Daney
64a2b16802 Blackfin: Convert BUG() to use unreachable()
Use the new unreachable() macro instead of for(;;);

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 08:38:35 -05:00
Mike Frysinger
5540a44e3e Blackfin: define __NR_recvmmsg
Commit a2e2725541 added recvmmsg to a bunch of arches (including the
Blackfin entry.S), but didn't actually add the new __NR_ define for it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 04:07:32 -05:00
Alan Jenkins
9e1b9b8072 module: make MODULE_SYMBOL_PREFIX into a CONFIG option
The next commit will require the use of MODULE_SYMBOL_PREFIX in
.tmp_exports-asm.S.  Currently it is mixed in with C structure
definitions in "asm/module.h".  Move the definition of this arch option
into Kconfig, so it can be easily accessed by any code.

This also lets modpost.c use the same definition.  Previously modpost
relied on a hardcoded list of architectures in mk_elfconfig.c.

A build test for blackfin, one of the two MODULE_SYMBOL_PREFIX archs,
showed the generated code was unchanged.  vmlinux was identical save
for build ids, and an apparently randomized suffix on a single "__key"
symbol in the kallsyms data).

Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Acked-by: Mike Frysinger <vapier@gentoo.org> (blackfin)
CC: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-12-15 16:28:26 +10:30
Mike Frysinger
8a833110f1 Blackfin: drop duplicate sched_clock
The Blackfin sched_clock() func is pretty much a duplicate of the common
version, so just punt it.

Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:56 -05:00
Mike Frysinger
a797a0e242 Blackfin: NOMPU: skip DMA ICPLB hole when it is redundant
Normally there is no user-reserved memory after the DMA region which means
there is no user-reserved ICPLB coverage.  So the DMA hole can be covered
by the large hole that is always added to cover up to the async bank.  We
only need an explicit DMA whole when we also add an explicit mapping for
the user-reserved memory.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:54 -05:00
Mike Frysinger
0a68b5341d Blackfin: MPU: add missing __init markings
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:53 -05:00
Barry Song
d1be2e485b Blackfin: add support for TIF_NOTIFY_RESUME
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:52 -05:00
Mike Frysinger
88f7c2fb0f Blackfin: kgdb_test: clean up code a bit
- document simple global symbols
- convert printk to pr_*
- clean up spurious whitespace
- use min_t()

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:50 -05:00
Alexey Dobriyan
397b761cc4 Blackfin: convert kgdbtest to proc_fops
The read_proc and write_proc interfaces are going to be removed in the
common kernel code.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:49 -05:00
Mike Frysinger
c768a943fd Blackfin: convert cyc2ns() to clocksource_cyc2ns()
The former no longer exists.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:47 -05:00
Mike Frysinger
99e452e5d3 Blackfin: ip0x: pull in asm/portmux.h for P_xxx defines
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:44 -05:00
Mike Frysinger
caf0ea8582 Blackfin: drop unused ax88180 resources
The ax88180 driver was never merged, so drop the corresponding resources.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:43 -05:00
Michael Hennerich
efaf7cd955 Blackfin: bf537-stamp: add ADF702x network driver resources
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:40 -05:00
Barry Song
706a01b1c6 Blackfin: bf537-stamp: add CAN resources
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:38 -05:00
Michael Hennerich
1f13f2fdca Blackfin: bf537-stamp: add AD5258 i2c address
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:35 -05:00
Cliff Cai
04267638e0 Blackfin: bf537-stamp: add adau1761 i2c address
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:32 -05:00
Cliff Cai
d53127ffd6 Blackfin: bf537-stamp: add adau1371 i2c address
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:31 -05:00
Michael Hennerich
78756c6230 Blackfin: bf537-stamp: add ADP8870 resources
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:29 -05:00
Mike Frysinger
5b7c57751e Blackfin: bf537-stamp: kill AD714x board-specific Kconfigs
Include the AD714x SPI/I2C resources based on what is possible.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:25 -05:00
Michael Hennerich
1d23dc89f2 Blackfin: bf537-stamp: update ADP5520 resources
Matches feedback for driver changes.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:23 -05:00
Michael Hennerich
5db4036b46 Blackfin: bf537-stamp: add ADXL346 orientation sensing support
The ADXL34x driver was updated to include orientation sensing, so have the
bf537-stamp use it by default.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:20 -05:00
Michael Hennerich
57af8edf3f Blackfin: bf537-stamp/bf548-ezkit: update ADXL34x resources
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:18 -05:00
Mike Frysinger
31ad0e27ed Blackfin: BF51x: unify def/cdef headers
Whole lot of duplicated code here just went bye bye.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:16 -05:00
Mike Frysinger
b1740549d4 Blackfin: BF52x: unify def/cdef headers
Whole lot of duplicated code here just went bye bye.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:13 -05:00
Mike Frysinger
7eb87fd3f1 Blackfin: BF537: push down error masks to avoid namespace pollution
The error masks are only needed in the BF537 demux error code, so instead
of needing all the short peripheral defines in global space, push these
masks into the one file where they are actually needed.  This fixes a
bunch of define collisions with common code (can/serial/etc...).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Barry Song <barry.song@analog.com>
2009-12-15 00:16:11 -05:00
Yi Li
578d36f5e1 Blackfin: SMP: don't start up core b until its state has been completely onlined
When testing PREEMPT_RT kernel on BF561-EZKit, the kernel blocks while
booting.  When the kernel initializes the ethernet driver, it sleeps and
never wakes up.

The issue happens when the kernel waits for a timer for Core B to timeout
(the timers are per-cpu based: static DEFINE_PER_CPU(struct tvec_base *,
tvec_bases) = &boot_tvec_bases).

However, the ksoftirqd thread for Core B (note, the ksoftirqd thread is
also per-cpu based) cannot work properly, and the timers for Core B never
times out.

When ksoftirqd() for the first time runs on core B, it is possible core A
is still initializing core B (see smp_init() -> cpu_up() -> __cpu_up()).
So the "cpu_is_offline()" check may return true and ksoftirqd moves to
"wait_to_die".

So delay the core b start up until the per-cpu timers have been set up
fully.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:09 -05:00
Barry Song
ad774b7cb0 Blackfin: convert to asm-generic pci headers
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:07 -05:00
Mike Frysinger
2d40292b5a Blackfin: io.h: fix random busted whitespace
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:04 -05:00
Barry Song
dd3b0e3e6a Blackfin: dma-mapping.h: flesh out missing DMA mapping functions
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:01 -05:00
Barry Song
a00b4fe5ce Blackfin: workaround anomaly 05000310
While fetching instructions at the boundary of L1 instruction SRAM, a false
External Memory Addressing Error might be triggered.  We should ignore this
and continue on our way to avoid random crashes.

Because hardware errors are not exact in the Blackfin architecture, we need
to catch a few more common cases when the code flow changes and the signal
is finally delivered.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:59 -05:00
Mike Frysinger
340a1be1ee Blackfin: drop ptrace() write support for fixed code/bootrom
These regions are either read-only and won't work anyways (bootrom), or
we don't want people screwing with them because they're shared between
all processes (fixed code).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:57 -05:00
Barry Song
e187837b6f Blackfin: MPU: support XIP in async flash memory
The NOMPU code already supported executing in the async banks, so this
brings the MPU code in line.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:54 -05:00
Barry Song
d45e8db1b2 Blackfin: drop 4KB reserve at end of memory
The point of this small chunk was to avoid anomaly 05000310.  This never
really seemed to do what it was intended though -- no valid CPLBs exist
over the reserved memory, and there is often memory before it anyways (due
to the uClinux MTD and/or reserved DMA region).  Plus, it doesn't address
the L1 instruction case.

So drop this chunk as it wastes memory and is affront to humanity.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:50 -05:00
Barry Song
c45c06596e Blackfin: support smaller uncached DMA chunks for memory constrained systems
When working with 8 meg systems, forcing a 1 meg DMA chunk heavily cuts
into the available resources.  So support smaller chunks to better cover
needs for these systems.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:48 -05:00
Mike Frysinger
5df326aca4 Blackfin: push BF5Xx configs down into mach-specific Kconfigs
While we're moving the BF54x code, have the BF54xM variants select the
normal BF54x values so that the rest of the Kconfig tree doesn't need to
check the BF54xM variant everytime it wants to check the BF54x.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:45 -05:00
Mike Frysinger
2f5a086402 Blackfin: finish_atomic_sections: optimize the RTS step
No point in returning to userspace just to have it immediately perform the
RTS step.  We have to update the PC anyways, so do the RTS too.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:42 -05:00
Sonic Zhang
0d5e35940b Blackfin: kgdb: punt dead code
None of these vars/funcs were being used.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:40 -05:00
Mike Frysinger
e34132f40b Blackfin: reject NULL callback in set_dma_callback()
It makes no sense to call this function with a NULL callback.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:37 -05:00
Mike Frysinger
43acb9cdef Blackfin: punt dead/unused flash mem_init settings
I don't think these defines were ever used.  At any rate, we have common
bit defines for all parts as well as a Kconfig option to declare the EBIU
async timings, and no one has really complained about this so far.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:33 -05:00
Mike Frysinger
8c0b4351cc Blackfin: gptimers: use unsigned timer/group ids
Since we always use these ids as unsigned values, and we have some assert
code to make sure they don't exceed a limit, avoid signed issues.

Reported-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:30 -05:00
Robin Getz
dbc5e6989e Blackfin: don't walk VMAs when oopsing
If we're double faulting, then we have to assume the VMAs are not safe as
broken pointers here will prevent full trace output for the double fault.
Shouldn't be a big problem though as rarely is a double fault caused by
code in userspace.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:28 -05:00
Mike Frysinger
e92d32fcb9 Blackfin: force BFD target when linking modules
This allows us to use any Blackfin toolchain to create kernel modules
(such as the FDPIC bfin-linux-uclibc toolchain).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:25 -05:00
Mike Frysinger
ee3773367b Blackfin: comment the FDPIC PTRACE defines
This matches similar documentation for the FRV FDPIC code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:23 -05:00
Philippe Gerum
2c29661e0b Blackfin/ipipe: update version stamp
Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Li Yi <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:21 -05:00
Philippe Gerum
4815b883ed Blackfin/ipipe: introduce support for CONFIG_MPU
Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Li Yi <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:18 -05:00
Philippe Gerum
7d4a005c43 Blackfin/ipipe: fix forward ref to barrier()
Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Li Yi <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:15 -05:00
Philippe Gerum
d2685fb7b4 Blackfin/ipipe: prepare status bitops for SMP support
Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Li Yi <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:12 -05:00
Valentin Yakovenkov
ab843c7940 Blackfin: add support for the Acvilon BF561 board
Signed-off-by: Valentin Yakovenkov <yakovenkov@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:10 -05:00
Mike Frysinger
b2e8dbd204 Blackfin: add an uncompressed vmImage target
This is useful for quick tests where networks are faster than compression,
and/or the compression code is broken.

Reported-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:08 -05:00
Mike Frysinger
13a1320cf5 Blackfin: don't give CPU its own line in traps output
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:05 -05:00
Robin Getz
7a1a8cc190 Blackfin: announce current cpu rev when booting
User reports rarely include full information, so include this important
tidbit up front.  It's also good to know at a glance in general.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:01 -05:00
Mike Frysinger
00d2460454 Blackfin: unify DMA masks
Every Blackfin variant has the same DMA bit masks, so avoid duplicating
them over and over in each mach header.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:59 -05:00
Michael Hennerich
c6feb76828 Blackfin: fix typo in isp1760 platform name
The driver changed from "isp1760-hcd" to "isp1760", so update resources
to match.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:55 -05:00
Mike Frysinger
a8e8e49168 Blackfin: unify duplicated power masks
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:53 -05:00
Mike Frysinger
761ec44add Blackfin: pull in asm/dpmc.h for power defines
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:50 -05:00
Mike Frysinger
2abdf79115 Blackfin: H8606/ip0x: drop redundant SPI ctl_reg settings
No need to set MSTR in .ctl_reg as the Blackfin SPI bus driver does this
already for all parts.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:49 -05:00
Mike Frysinger
cfed440997 Blackfin: BF54x: punt useless "masks" for count/address MMRs
There's no point in having mask defines when the entire MMR value is a
count or address.  i.e. applying a mask of -1 is pointless.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:45 -05:00
Mike Frysinger
e153a97c21 Blackfin: punt unused MXVR masks
There are no MXVR device drivers, and if someday there is, we can put
these in a dedicated header rather than polluting the global namespace.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:43 -05:00
Mike Frysinger
cd32cc7362 Blackfin: punt OTP MMRs
People should not be accessing OTP MMRs directly.  They should instead go
through the Blackfin ROM helper functions.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:40 -05:00
Mike Frysinger
b1fa2e8f62 Blackfin: BF51x: dump non-existent SPI/NFC MMRs
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:39 -05:00
Mike Frysinger
341a1fc0d1 Blackfin: scrub unused watchdog mmr masks
The watchdog code doesn't need these, and the other parts had these
punted, so keep the global namespace clean.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:36 -05:00
Mike Frysinger
1915b6c0ae Blackfin: scrub unused RTC masks
The RTC driver code doesn't need these, and the other parts had these
punted, so keep the global namespace clean.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:33 -05:00
Mike Frysinger
60883e28b3 Blackfin: unify BF547/8/9 headers
No point in duplicating entire lists when we can simply tail into other
parts for most of the MMRs.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:31 -05:00
Mike Frysinger
4ed250a563 Blackfin: fix some BF547 header copy & paste typos
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:28 -05:00
Mike Frysinger
5da8a3dc48 Blackfin: rename BF542 host dma defines
All the other BF54x parts had these defines renamed to avoid collision,
but it looks the BF542 was missed somehow.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:25 -05:00
Mike Frysinger
17a1b5e374 Blackfin: coreb: switched to unlocked_ioctl
We don't need the BKL and now people will stop looking at this.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:21 -05:00
Mike Frysinger
d2e015d65f Blackfin: convert DMA mutex to an atomic and drop redundant code
The DMA channel status field was encoding redundant info wrt the DMA MMR
config register, and it was doing an incomplete job of checking all DMA
channels (some drivers write directly to the config register).  So drop
the tristate field in favor of a binary atomic field.  This simplifies
the code in general, removes the implicit need for sleeping, and forces
the suspend code to handle all channels properly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:18 -05:00
Michael Hennerich
adfc046740 Blackfin: update bfin_rotary defines
The driver was moved during the merge process, so update the defines to
match the new location.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:16 -05:00
Mike Frysinger
bbc51e97d3 Blackfin: push down asm/ includes and out of bfin-global.h
Avoid including unnecessary headers all the time as well as circular
includes with core requirements.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:14 -05:00
Mike Frysinger
872d024b40 Blackfin: pull in firmware Kconfig
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:12 -05:00
Mike Frysinger
b6357116c4 Blackfin: BF51x/BF52x: fill out bfin_clear_PPI_STATUS()
All the arches define a helper macro to make things easy for driver code.

Reported-by: Frank Van Hooft <frank@frankvh.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:09 -05:00
Barry Song
6e3647554e Blackfin: bf537-stamp: need io.h for writeb() funcs
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:08 -05:00
Michael Hennerich
621dd24743 Blackfin: bf538: add support for extended GPIO banks
The GPIOs on ports C/D/E on the BF538/BF539 do not behave the same way as
the other ports on the part and the same way as all other Blackfin parts.
The MMRs are programmed slightly different and they cannot be used to
generate interrupts or wakeup a sleeping system.  Since these guys don't
fit into the existing code, create a simple gpiolib driver for them.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:05 -05:00
Graf Yang
46fe23ac39 Blackfin: add C define of trace_buffer_init()
Have the C API trace funcs match the assembly API trace funcs.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:03 -05:00
Michael Hennerich
d887a1ce28 Blackfin: cpufreq: use a constant latency
PLL_LOCKCNT applies only to the PLL programming sequence which does not
apply to core and system clock dividers.  Writes to PLL_DIV to change the
CSEL/SSEL dividers take effect immediately.

There is still overhead in software in writing the new dividers, so just
use a value of 50us as this should be good enough.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:00 -05:00
Mike Frysinger
21b03cfe4c Blackfin: clean up isp1362 board resources
Drop the CONFIG_USB_ISP1362_BFIN_GPIO_IRQ Kconfig as it never made it into
mainline and it was a bad interface into the board resources.  For boards
that actually used this, replace it with an actual IRQ define.  For boards
that didn't, simply drop the resources.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:13:58 -05:00
Mike Frysinger
5cd82a6d58 Blackfin: calculate on-chip lengths at link time rather than run time
Since the link sizes never change at runtime, push the calculation out to
the linker script to save some useless calculation costs.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:13:55 -05:00
Bernd Schmidt
13048f8866 Blackfin: improve async bank access checking (for cross-banks & XIP)
The access_ok() function did not accept ranges within the async banks
which made it impossible to do XIP in flash.  Fixing that also showed
that the current bfin_mem_access_type() code did not work with accesses
that spanned async banks (like a file system).  So split out and fix the
async bank checks so that all these scenarios work as expected.

Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:13:52 -05:00
Michael Hennerich
cb5ae60f7a Blackfin: convert DMA code to a proper bitmap
Rather than using our own data structures that basically boil down to a
bitmap, use the standard bitmap functions.

Reported-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:13:51 -05:00
Michael Hennerich
ddcd7cb857 Blackfin: clean up bf537-lq035 board resources
Now that the driver has been updated, convert the board resources to the
new i2c framework for managing slaves.

For boards that don't actually hook up to this hardware, simply drop the
resources altogether.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:13:48 -05:00
Barry Song
89e84eeace Blackfin: add some bounds checking to peripheral_request
The requested peripheral is turned into an index into some state arrays,
so make sure the calculated index doesn't exceed the index.  This occurs
when using bogus pin values or the define headers are screwed up.  Now
we'll notice right away that something needs fixing instead of trying to
track down random memory corruption.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:13:46 -05:00
Yi Li
298571249a Blackfin: use common code for cycle->nanosecond conversion
No point in redefining things that common code already does for us.  Also
use CYC2NS_SCALE_FACTOR to better reflect reality and for better precision.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:13:43 -05:00
Yi Li
ceb33be95a Blackfin: unify sched_clock() handling between clock sources
Currently sched_clock() is only defined when using CYCLES as a clock
source.  Declare sched_clock() in common code and mark it with notrace to
prevent invoking sched_clock() recursively (because ftrace uses
sched_clock() to record time).

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:13:41 -05:00
Yi Li
f7036d649c Blackfin: fix gptimer0 clock source compile warning
Some of the clocksource prototypes were updated, but the gptimer0 func was
missed in the process.  Not a big issue as the argument is ignored, but we
should fix the compile warning anyways.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:13:38 -05:00
Mike Frysinger
3a022ba9ac Blackfin: update defconfigs
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:13:37 -05:00
Mike Frysinger
ddf9ddacef Blackfin: convert to generic checksum code
The Blackfin port only implemented an optimized version of the
csum_tcpudp_nofold function, so convert everything else to the new
generic code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:13:32 -05:00
Thomas Gleixner
239007b844 genirq: Convert irq_desc.lock to raw_spinlock
Convert locks which cannot be sleeping locks in preempt-rt to
raw_spinlocks.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
2009-12-14 23:55:33 +01:00
Thomas Gleixner
e5931943d0 locking: Convert raw_rwlock functions to arch_rwlock
Name space cleanup for rwlock functions. No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: linux-arch@vger.kernel.org
2009-12-14 23:55:32 +01:00
Thomas Gleixner
fb3a6bbc91 locking: Convert raw_rwlock to arch_rwlock
Not strictly necessary for -rt as -rt does not have non sleeping
rwlocks, but it's odd to not have a consistent naming convention.

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: linux-arch@vger.kernel.org
2009-12-14 23:55:32 +01:00
Thomas Gleixner
0199c4e68d locking: Convert __raw_spin* functions to arch_spin*
Name space cleanup. No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: linux-arch@vger.kernel.org
2009-12-14 23:55:32 +01:00
Thomas Gleixner
edc35bd72e locking: Rename __RAW_SPIN_LOCK_UNLOCKED to __ARCH_SPIN_LOCK_UNLOCKED
Further name space cleanup. No functional change

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: linux-arch@vger.kernel.org
2009-12-14 23:55:32 +01:00
Thomas Gleixner
445c89514b locking: Convert raw_spinlock to arch_spinlock
The raw_spin* namespace was taken by lockdep for the architecture
specific implementations. raw_spin_* would be the ideal name space for
the spinlocks which are not converted to sleeping locks in preempt-rt.

Linus suggested to convert the raw_ to arch_ locks and cleanup the
name space instead of using an artifical name like core_spin,
atomic_spin or whatever

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: linux-arch@vger.kernel.org
2009-12-14 23:55:32 +01:00
Sam Ravnborg
559df2e021 kbuild: move asm-offsets.h to include/generated
The simplest method was to add an extra asm-offsets.h
file in arch/$ARCH/include/asm that references the generated file.

We can now migrate the architectures one-by-one to reference
the generated file direct - and when done we can delete the
temporary arch/$ARCH/include/asm/asm-offsets.h file.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12 13:08:14 +01:00
Linus Torvalds
3126c136bc Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (21 commits)
  ext3: PTR_ERR return of wrong pointer in setup_new_group_blocks()
  ext3: Fix data / filesystem corruption when write fails to copy data
  ext4: Support for 64-bit quota format
  ext3: Support for vfsv1 quota format
  quota: Implement quota format with 64-bit space and inode limits
  quota: Move definition of QFMT_OCFS2 to linux/quota.h
  ext2: fix comment in ext2_find_entry about return values
  ext3: Unify log messages in ext3
  ext2: clear uptodate flag on super block I/O error
  ext2: Unify log messages in ext2
  ext3: make "norecovery" an alias for "noload"
  ext3: Don't update the superblock in ext3_statfs()
  ext3: journal all modifications in ext3_xattr_set_handle
  ext2: Explicitly assign values to on-disk enum of filetypes
  quota: Fix WARN_ON in lookup_one_len
  const: struct quota_format_ops
  ubifs: remove manual O_SYNC handling
  afs: remove manual O_SYNC handling
  kill wait_on_page_writeback_range
  vfs: Implement proper O_SYNC semantics
  ...
2009-12-11 15:31:13 -08:00
Al Viro
f8b7256096 Unify sys_mmap*
New helper - sys_mmap_pgoff(); switch syscalls to using it.

Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-11 06:44:29 -05:00
Christoph Hellwig
6b2f3d1f76 vfs: Implement proper O_SYNC semantics
While Linux provided an O_SYNC flag basically since day 1, it took until
Linux 2.4.0-test12pre2 to actually get it implemented for filesystems,
since that day we had generic_osync_around with only minor changes and the
great "For now, when the user asks for O_SYNC, we'll actually give
O_DSYNC" comment.  This patch intends to actually give us real O_SYNC
semantics in addition to the O_DSYNC semantics.  After Jan's O_SYNC
patches which are required before this patch it's actually surprisingly
simple, we just need to figure out when to set the datasync flag to
vfs_fsync_range and when not.

This patch renames the existing O_SYNC flag to O_DSYNC while keeping it's
numerical value to keep binary compatibility, and adds a new real O_SYNC
flag.  To guarantee backwards compatiblity it is defined as expanding to
both the O_DSYNC and the new additional binary flag (__O_SYNC) to make
sure we are backwards-compatible when compiled against the new headers.

This also means that all places that don't care about the differences can
just check O_DSYNC and get the right behaviour for O_SYNC, too - only
places that actuall care need to check __O_SYNC in addition.  Drivers and
network filesystems have been updated in a fail safe way to always do the
full sync magic if O_DSYNC is set.  The few places setting O_SYNC for
lower layers are kept that way for now to stay failsafe.

We enforce that O_DSYNC is set when __O_SYNC is set early in the open path
to make sure we always get these sane options.

Note that parisc really screwed up their headers as they already define a
O_DSYNC that has always been a no-op.  We try to repair it by using it for
the new O_DSYNC and redefinining O_SYNC to send both the traditional
O_SYNC numerical value _and_ the O_DSYNC one.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger@sun.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jan Kara <jack@suse.cz>
2009-12-10 15:02:50 +01:00
Linus Torvalds
4ef58d4e2a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits)
  tree-wide: fix misspelling of "definition" in comments
  reiserfs: fix misspelling of "journaled"
  doc: Fix a typo in slub.txt.
  inotify: remove superfluous return code check
  hdlc: spelling fix in find_pvc() comment
  doc: fix regulator docs cut-and-pasteism
  mtd: Fix comment in Kconfig
  doc: Fix IRQ chip docs
  tree-wide: fix assorted typos all over the place
  drivers/ata/libata-sff.c: comment spelling fixes
  fix typos/grammos in Documentation/edac.txt
  sysctl: add missing comments
  fs/debugfs/inode.c: fix comment typos
  sgivwfb: Make use of ARRAY_SIZE.
  sky2: fix sky2_link_down copy/paste comment error
  tree-wide: fix typos "couter" -> "counter"
  tree-wide: fix typos "offest" -> "offset"
  fix kerneldoc for set_irq_msi()
  spidev: fix double "of of" in comment
  comment typo fix: sybsystem -> subsystem
  ...
2009-12-09 19:43:33 -08:00
Linus Torvalds
2588465bad Merge branch 'bkl-arch-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'bkl-arch-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  mn10300: Remove the BKL from sys_execve
  m68knommu: Remove the BKL from sys_execve
  m68k: Remove the BKL from sys_execve
  h83000: Remove BKL from sys_execve
  frv: Remove the BKL from sys_execve
  blackfin: Remove the BKL from sys_execve
  um: Remove BKL from mmapper
  um: Remove BKL from random
  s390: Remove BKL from prng
2009-12-09 08:07:51 -08:00
Linus Torvalds
6035ccd8e9 Merge branch 'for-2.6.33' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.33' of git://git.kernel.dk/linux-2.6-block: (113 commits)
  cfq-iosched: Do not access cfqq after freeing it
  block: include linux/err.h to use ERR_PTR
  cfq-iosched: use call_rcu() instead of doing grace period stall on queue exit
  blkio: Allow CFQ group IO scheduling even when CFQ is a module
  blkio: Implement dynamic io controlling policy registration
  blkio: Export some symbols from blkio as its user CFQ can be a module
  block: Fix io_context leak after failure of clone with CLONE_IO
  block: Fix io_context leak after clone with CLONE_IO
  cfq-iosched: make nonrot check logic consistent
  io controller: quick fix for blk-cgroup and modular CFQ
  cfq-iosched: move IO controller declerations to a header file
  cfq-iosched: fix compile problem with !CONFIG_CGROUP
  blkio: Documentation
  blkio: Wait on sync-noidle queue even if rq_noidle = 1
  blkio: Implement group_isolation tunable
  blkio: Determine async workload length based on total number of queues
  blkio: Wait for cfq queue to get backlogged if group is empty
  blkio: Propagate cgroup weight updation to cfq groups
  blkio: Drop the reference to queue once the task changes cgroup
  blkio: Provide some isolation between groups
  ...
2009-12-08 08:19:16 -08:00
Jiri Kosina
d014d04386 Merge branch 'for-next' into for-linus
Conflicts:

	kernel/irq/chip.c
2009-12-07 18:36:35 +01:00
André Goddard Rosa
af901ca181 tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:55 +01:00
Jens Axboe
220d0b1dbf Merge branch 'master' into for-2.6.33 2009-12-03 13:49:39 +01:00
David S. Miller
ff9c38bba3 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	net/mac80211/ht.c
2009-12-01 22:13:38 -08:00
Ilya Loginov
2d4dc890b5 block: add helpers to run flush_dcache_page() against a bio and a request's pages
Mtdblock driver doesn't call flush_dcache_page for pages in request.  So,
this causes problems on architectures where the icache doesn't fill from
the dcache or with dcache aliases.  The patch fixes this.

The ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE symbol was introduced to avoid
pointless empty cache-thrashing loops on architectures for which
flush_dcache_page() is a no-op.  Every architecture was provided with this
flush pages on architectires where ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE is
equal 1 or do nothing otherwise.

See "fix mtd_blkdevs problem with caches on some architectures" discussion
on LKML for more information.

Signed-off-by: Ilya Loginov <isloginov@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Peter Horton <phorton@bitbox.co.uk>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-26 09:16:19 +01:00
Graf Yang
aa23531ce5 Blackfin: fix SMP build error in start_thread()
Commit d5ce528c8e (Blackfin: convert irq/process to asm-generic)
incorrectly merged the smp and non-smp cases of start_thread() causing the
L1 stack to be setup on the SMP port instead of the UP port.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-11-25 02:38:01 -05:00
Roel Kluin
05bad36ce7 Blackfin: fix memset in smp_send_reschedule() and -stop()
To set zeroes the sizeof the struct should be used rather
than sizeof the pointer, kzalloc does that.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-11-25 02:35:45 -05:00
Jie Zhang
46b60faf8c Blackfin: fix typo in ptrace poking
Commit c014e15a2f (Blackfin: convert ptrace to new memory functions)
introduced a copy & paste typo in the ptrace poke data/text handling.  The
access_process_vm() function call was telling it to read instead of write.

Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-11-25 02:35:43 -05:00
Mike Frysinger
a2ca78cee1 Blackfin: check for anomaly 05000475
Parts that have on-chip L2 SRAM cannot safely utilize writeback caching
mode, so reject any attempts to use it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-11-25 02:35:41 -05:00
Mike Frysinger
f99e8c1d0f Blackfin: work around testset anomaly 05000477
Ironically, the atomic testset instruction cannot be interrupted else it
will produce incorrect results.  So disable interrupts to help it out.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-11-25 02:35:39 -05:00
Mike Frysinger
af5d7fc7e4 Blackfin: update anomaly lists
Add some recently documented anomalies (473, 474, 475, 477).  Also stick
a "do not edit" notice in here so people know these are copies of some
master version.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-11-25 02:35:37 -05:00
André Goddard Rosa
7bae2c4898 Blackfin: fix cache Kconfig typo
The Kconfig option is "BFIN_EXTMEM_WRITETHROUGH", not "..._WRITETROUGH".

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-11-25 02:35:35 -05:00
Michael Hennerich
865bddfbf7 Blackfin: fix suspend/resume failure with some on-chip ROMs
Some Blackfin on-chip ROMs utilize some MDMA channels during the suspend
and resume process, but don't clean up after themselves.  So manually
clear all DMA channels when resuming since no DMA could have been running
at this point in time.  Now Linux should be able to work regardless of any
laziness on the part of the on-chip ROM or boot loader.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-11-25 02:35:33 -05:00
David S. Miller
3505d1a9fd Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/sfc/sfe4001.c
	drivers/net/wireless/libertas/cmd.c
	drivers/staging/Kconfig
	drivers/staging/Makefile
	drivers/staging/rtl8187se/Kconfig
	drivers/staging/rtl8192e/Kconfig
2009-11-18 22:19:03 -08:00
Rusty Russell
dd17c8f729 percpu: remove per_cpu__ prefix.
Now that the return from alloc_percpu is compatible with the address
of per-cpu vars, it makes sense to hand around the address of per-cpu
variables.  To make this sane, we remove the per_cpu__ prefix we used
created to stop people accidentally using these vars directly.

Now we have sparse, we can use that (next patch).

tj: * Updated to convert stuff which were missed by or added after the
      original patch.

    * Kill per_cpu_var() macro.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
2009-10-29 22:34:15 +09:00
John Kacur
25708a5fe7 blackfin: Remove the BKL from sys_execve
This looks like a cut-and-paste job. For example, compare this
function to sys_execve in arch/x86/kernel/process_64.c and it is
almost line by line the same, except the one in x86 nolonger has the
big kernel lock. All of the functions called between the lock are
generic and not specific to blackfin - thus, I believe it is safe to
remove the bkl here.

Signed-off-by: John Kacur <jkacur@redhat.com>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
LKML-Reference: <alpine.LFD.2.00.0910130007240.3658@localhost.localdomain>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-10-14 17:18:14 +02:00
Arnaldo Carvalho de Melo
a2e2725541 net: Introduce recvmmsg socket syscall
Meaning receive multiple messages, reducing the number of syscalls and
net stack entry/exit operations.

Next patches will introduce mechanisms where protocols that want to
optimize this operation will provide an unlocked_recvmsg operation.

This takes into account comments made by:

. Paul Moore: sock_recvmsg is called only for the first datagram,
  sock_recvmsg_nosec is used for the rest.

. Caitlin Bestler: recvmmsg now has a struct timespec timeout, that
  works in the same fashion as the ppoll one.

  If the underlying protocol returns a datagram with MSG_OOB set, this
  will make recvmmsg return right away with as many datagrams (+ the OOB
  one) it has received so far.

. Rémi Denis-Courmont & Steven Whitehouse: If we receive N < vlen
  datagrams and then recvmsg returns an error, recvmmsg will return
  the successfully received datagrams, store the error and return it
  in the next call.

This paves the way for a subsequent optimization, sk_prot->unlocked_recvmsg,
where we will be able to acquire the lock only at batch start and end, not at
every underlying recvmsg call.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12 23:40:10 -07:00
Alexey Dobriyan
d43c36dc6b headers: remove sched.h from interrupt.h
After m68k's task_thread_info() doesn't refer to current,
it's possible to remove sched.h from interrupt.h and not break m68k!
Many thanks to Heiko Carstens for allowing this.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-10-11 11:20:58 -07:00
Michael Hennerich
796dada9f5 Blackfin: convert to GENERIC_HARDIRQS_NO__DO_IRQ
Blackfin already sets proper flow handlers on all IRQs, and we don't rely
on __do_IRQ, therefore we can simply select GENERIC_HARDIRQS_NO__DO_IRQ.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-08 00:58:20 -04:00
Mike Frysinger
282246dae8 Blackfin: drop all simple-gpio board resources
The simple-gpio has been replaced by the gpio sysfs interface, so drop the
unused simple-gpio resources from all Blackfin boards.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-08 00:58:18 -04:00
Thomas Chou
59bd00c850 Blackfin: fix framebuffer mmap bug for nommu
The patch added a special get_unmapped_area for framebuffer which
was hooked to the file ops in drivers/video/fbmem.c.

This is needed since v2.6.29-rc1 where nommu vma management was
updated, and mmap of framebuffer caused kernel BUG panic. You may turn
on "Debug the global anon/private NOMMU mapping region tree" config to
such message.

As Documentation/nommu-mmap.txt said,
"To provide shareable character device support, a driver must provide
a file->f_op->get_unmapped_area() operation. The mmap() routines will
call this to get a proposed address for the mapping."

With this change, user space should call mmap for framebuffer using
shared map. Or it can try shared map first, then private map if
failed. This shared map usage is now consistent between mmu and nommu.

The sys_ file may not be a good place for this patch. But there is a
similar one for sparc. I tested a similar patch on nios2nommu, though
I don't have a blackfin board to test.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-08 00:58:15 -04:00
Jaswinder Singh Rajput
4a7bcb4fe9 Blackfin: includecheck fix: mach-bf548, ezkit.c
Fix the following 'make includecheck' warning:

  arch/blackfin/mach-bf548/boards/ezkit.c: linux/input.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-08 00:58:13 -04:00
Mike Frysinger
5a2b0d7315 Blackfin: drop cs_change_per_word setting
Structs get initialized to 0 already, and we want to punt this field, so
scrub it from all of our boards.

Reported-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-08 00:58:11 -04:00
Mike Frysinger
7036c61fe0 Blackfin: bf533-ezkit: convert to physmap/jedec_probe
Now that the common jedec_probe supports the ST PSD4256G6V, no need to
use the custom stm_flash driver.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-08 00:58:07 -04:00
Michael Hennerich
50c4c0861a Blackfin: convert adv7393 resources to new i2c framework
Now that the driver has been updated, convert the board resources to the
new i2c framework for managing slaves.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-08 00:57:54 -04:00
Graf Yang
19a3b6034a Blackfin: fix missed cache config renames
Looks like the big Kconfig cache split/rename missed one spot in the SMP
cache lock headers.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07 04:48:08 -04:00
Mike Frysinger
48dee09325 Blackfin: cplbinfo: drop d_path() hacks
The cplbinfo was using d_path() to figure out which cpu/cplb was being
parsed.  As Al pointed out, this isn't exactly reliable as it assumes the
static VFS path to be unchanged, and it's just poor form.  So use the
proc_create_data() to properly (and internally) pass the exact cpu/cplb
requested to the parser function.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07 04:48:04 -04:00
Mike Frysinger
d586e833f9 Blackfin: asm/irq.h: pull in mach/anomaly.h for anomaly defines
The asm/irq.h header uses anomaly defines, but doesn't make sure to
explicitly include the anomaly header for them.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07 04:48:01 -04:00
Barry Song
6206f709d9 Blackfin: BF51x: add PTP MMR defines 2009-10-07 04:47:57 -04:00
Robin Getz
96f1050d3d Blackfin: mass clean up of copyright/licensing info
Bill Gatliff & David Brownell pointed out we were missing some
copyrights, and licensing terms in some of the files in
./arch/blackfin, so this fixes things, and cleans them up.

It also removes:
 - verbose GPL text(refer to the top level ./COPYING file)
 - file names (you are looking at the file)
 - bug url (it's in the ./MAINTAINERS file)
 - "or later" on GPL-2, when we did not have that right

It also allows some Blackfin-specific assembly files to be under a BSD
like license (for people to use them outside of Linux).

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07 04:36:26 -04:00
john stultz
10f03f1a24 Blackfin: convert to use arch_gettimeoffset()
Convert Blackfin to use GENERIC_TIME via the arch_getoffset()
infrastructure, reducing the amount of arch specific code we need to
maintain.

I've taken my best swing at converting this, but I'm not 100% confident
I got it right.  My cross-compiler is now out of date (gcc4.2) so I
wasn't able to check if it compiled. Any assistance from arch
maintainers or testers to get this merged would be great.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07 04:36:20 -04:00
Alexey Dobriyan
828c09509b const: constify remaining file_operations
[akpm@linux-foundation.org: fix KVM]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01 16:11:11 -07:00
Tim Abbott
4a5e35135d blackfin: Cleanup linker script using new linker script macros.
Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: uclinux-dist-devel@blackfin.uclinux.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 17:16:22 -07:00
Linus Torvalds
c37efa9325 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (30 commits)
  Use macros for .data.page_aligned section.
  Use macros for .bss.page_aligned section.
  Use new __init_task_data macro in arch init_task.c files.
  kbuild: Don't define ALIGN and ENTRY when preprocessing linker scripts.
  arm, cris, mips, sparc, powerpc, um, xtensa: fix build with bash 4.0
  kbuild: add static to prototypes
  kbuild: fail build if recordmcount.pl fails
  kbuild: set -fconserve-stack option for gcc 4.5
  kbuild: echo the record_mcount command
  gconfig: disable "typeahead find" search in treeviews
  kbuild: fix cc1 options check to ensure we do not use -fPIC when compiling
  checkincludes.pl: add option to remove duplicates in place
  markup_oops: use modinfo to avoid confusion with underscored module names
  checkincludes.pl: provide usage helper
  checkincludes.pl: close file as soon as we're done with it
  ctags: usability fix
  kernel hacking: move STRIP_ASM_SYMS from General
  gitignore usr/initramfs_data.cpio.bz2 and usr/initramfs_data.cpio.lzma
  kbuild: Check if linker supports the -X option
  kbuild: introduce ld-option
  ...

Fix trivial conflict in scripts/basic/fixdep.c
2009-09-23 15:37:02 -07:00
Mike Frysinger
e56770fbc4 Blackfin: override text/data checking functions
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Robin Getz <rgetz@blackfin.uclinux.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:32 -07:00
Linus Torvalds
342ff1a1b5 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
  trivial: fix typo in aic7xxx comment
  trivial: fix comment typo in drivers/ata/pata_hpt37x.c
  trivial: typo in kernel-parameters.txt
  trivial: fix typo in tracing documentation
  trivial: add __init/__exit macros in drivers/gpio/bt8xxgpio.c
  trivial: add __init macro/ fix of __exit macro location in ipmi_poweroff.c
  trivial: remove unnecessary semicolons
  trivial: Fix duplicated word "options" in comment
  trivial: kbuild: remove extraneous blank line after declaration of usage()
  trivial: improve help text for mm debug config options
  trivial: doc: hpfall: accept disk device to unload as argument
  trivial: doc: hpfall: reduce risk that hpfall can do harm
  trivial: SubmittingPatches: Fix reference to renumbered step
  trivial: fix typos "man[ae]g?ment" -> "management"
  trivial: media/video/cx88: add __init/__exit macros to cx88 drivers
  trivial: fix typo in CONFIG_DEBUG_FS in gcov doc
  trivial: fix missing printk space in amd_k7_smp_check
  trivial: fix typo s/ketymap/keymap/ in comment
  trivial: fix typo "to to" in multiple files
  trivial: fix typos in comments s/DGBU/DBGU/
  ...
2009-09-22 07:51:45 -07:00
Anand Gadiyar
411c940385 trivial: fix typo "for for" in multiple files
trivial: fix typo "for for" in multiple files

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-21 15:14:54 +02:00
Ingo Molnar
cdd6c482c9 perf: Do the big rename: Performance Counters -> Performance Events
Bye-bye Performance Counters, welcome Performance Events!

In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.

Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.

All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)

The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.

Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.

User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)

This patch has been generated via the following script:

  FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')

  sed -i \
    -e 's/PERF_EVENT_/PERF_RECORD_/g' \
    -e 's/PERF_COUNTER/PERF_EVENT/g' \
    -e 's/perf_counter/perf_event/g' \
    -e 's/nb_counters/nb_events/g' \
    -e 's/swcounter/swevent/g' \
    -e 's/tpcounter_event/tp_event/g' \
    $FILES

  for N in $(find . -name perf_counter.[ch]); do
    M=$(echo $N | sed 's/perf_counter/perf_event/g')
    mv $N $M
  done

  FILES=$(find . -name perf_event.*)

  sed -i \
    -e 's/COUNTER_MASK/REG_MASK/g' \
    -e 's/COUNTER/EVENT/g' \
    -e 's/\<event\>/event_id/g' \
    -e 's/counter/event/g' \
    -e 's/Counter/Event/g' \
    $FILES

... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.

Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.

( NOTE: 'counters' are still the proper terminology when we deal
  with hardware registers - and these sed scripts are a bit
  over-eager in renaming them. I've undone some of that, but
  in case there's something left where 'counter' would be
  better than 'event' we can undo that on an individual basis
  instead of touching an otherwise nicely automated patch. )

Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 14:28:04 +02:00
Sam Ravnborg
caa27b66bd kbuild: use INSTALLKERNEL to select customized installkernel script
Replace the use of CROSS_COMPILE to select a customized
installkernel script with the possibility to set INSTALLKERNEL
to select a custom installkernel script when running make:

    make INSTALLKERNEL=arm-installkernel install

With this patch we are now more consistent across
different architectures - they did not all support use
of CROSS_COMPILE.

The use of CROSS_COMPILE was a hack as this really belongs
to gcc/binutils and the installkernel script does not change
just because we change toolchain.

The use of CROSS_COMPILE caused troubles with an upcoming patch
that saves CROSS_COMPILE when a kernel is built - it would no
longer be installable.
[Thanks to Peter Z. for this hint]

This patch undos what Ian did in commit:

  0f8e2d62fa
  ("use ${CROSS_COMPILE}installkernel in arch/*/boot/install.sh")

The patch has been lightly tested on x86 only - but all changes
looks obvious.

Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Mike Frysinger <vapier@gentoo.org> [blackfin]
Acked-by: Russell King <linux@arm.linux.org.uk> [arm]
Acked-by: Paul Mundt <lethal@linux-sh.org> [sh]
Acked-by: "H. Peter Anvin" <hpa@zytor.com> [x86]
Cc: Ian Campbell <icampbell@arcom.com>
Cc: Tony Luck <tony.luck@intel.com> [ia64]
Cc: Fenghua Yu <fenghua.yu@intel.com> [ia64]
Cc: Hirokazu Takata <takata@linux-m32r.org> [m32r]
Cc: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Kyle McMartin <kyle@mcmartin.ca> [parisc]
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> [powerpc]
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390]
Cc: Thomas Gleixner <tglx@linutronix.de> [x86]
Cc: Ingo Molnar <mingo@redhat.com> [x86]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20 12:18:14 +02:00
Yi Li
5bf9cbef99 Blackfin: update ftrace for latest toolchain
The mcount support that was finally added to the Blackfin gcc port isn't
exactly the same as what ftrace was developed against.  Now that the final
gcc version is in place, update the ftrace code to match.

While updating this, fix the swapped arguments to the tracer (signature is
(ip, parent_ip) while we were passing (parent_ip, ip)).

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:52 -04:00
Mike Frysinger
3b67d91b3e Blackfin: fix elf_fpregset_t definition
The elf_fpregset_t type relied on an empty struct in the asm/user.h, but
the transition to asm-generic/user.h dropped that empty struct.  Rather
than restore this useless struct, define the only user (elf_fpregset_t)
as an empty struct itself.  This fixes building when ELF dump support is
enabled.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:51 -04:00
Mike Frysinger
ea426e6c62 Blackfin: unify cache init functions
The CPLB implementations (mpu/nompu) had exact copies of the cacheinit
code.  Even the i/d cache functions are largely the same.  So unify them
both in the common kernel cache code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:49 -04:00
Graf Yang
e78feaaeeb Blackfin: swap clocksource ratings for gptimer/cycles
The cycles clocksource is a higher resolution than the gptimer one, so
make sure the ratings field reflects this.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:48 -04:00
Mike Frysinger
3289651a97 Blackfin: update ftrace_push_return_trace() breakage
Commit 71e308a239 updated ftrace_push_return_trace() prototype but didn't
update the Blackfin ftrace code, so things broke.  Since we don't support
the new stuff yet, call it with stub values.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:47 -04:00
Harald Krapfenbauer
9c21453e37 Blackfin: update cm board resources
Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:46 -04:00
Harald Krapfenbauer
6058434468 Blackfin: cm-bf537u: split board from cm-bf537e
The cm-bf537u module, while similar to the cm-bf537e, is different enough
to warrant its own resources.  It has a USB controller but no PHY.

Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:45 -04:00
Barry Song
769cfc0d08 Blackfin: bf538-ezkit: add SPI IRQ resources
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:43 -04:00
Sonic Zhang
88c28b2df9 Blackfin: increase default async timings for parallel flashes
The default async timings are a little too fast for the parallel flash
that is attached by default to the async banks.  So slow things down a bit
so accessing the hardware is stable.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:42 -04:00
Bernd Schmidt
4663f6ef25 Blackfin: add ICPLB coverage for async banks
When doing XIP, we need to execute out of the async banks, so we need
ICPLBs to allow this.

Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:42 -04:00
Mingquan Pan
4a3e53c1c4 Blackfin: use KERN_ALERT in all kgdb_test output
Most messages are already using KERN_ALERT, so be consistent to make
things easier to check with test scripts.

Signed-off-by: Mingquan Pan <grace.pan@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:40 -04:00
Yi Li
4e4d496ee3 Blackfin: fix BF54x SPI CS resources
The BF54x has three slave select signals for SPI0/SPI1, not eight.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:39 -04:00
Robin Getz
774b80229f Blackfin: fix typo in isram_write()
The DTEST write bit is 2, not 1.  Improve comments in the related macro
while we're here.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:38 -04:00
Michael Hennerich
ba877d4491 Blackfin: bf537-stamp: add adp5588 gpio resources
For the adp5588 GPIO daughter card.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:37 -04:00
Mike Frysinger
c40cdb2cbd Blackfin: add some isram-driver self tests
Make it easy to figure out if code changes here are correct.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:36 -04:00
Robin Getz
dedfd5d7f2 Blackfin: workaround anomaly 05000283
Make sure our interrupt entry code with exact hardware errors handles
anomaly 05000283 (infinite stall in system MMR kill) so we don't stall
while under load.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:34 -04:00
Michael Hennerich
05d17dfaab Blackfin: fix spelling in a few comments
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:33 -04:00
Yi Li
b6dbde27dd Blackfin: use raw_smp_processor_id() in exception code
When preempt debugging is enabled, smp_processor_id() may utilize the
"current" structure.  This may not be safe to access under all exceptions
due to it being in dynamically allocated memory.  So in exception code,
make sure we use raw_smp_processor_id() instead to get at the real value
directly.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:32 -04:00
Michael Hennerich
00dd66d012 Blackfin: remove useless duplicated assignment in gpio code
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:31 -04:00
Ingo Molnar
8d7ac69ffa Blackfin: Fix link errors with binutils 2.19 and GCC 4.3
Not sure whether this has been reported/fixed before.

Today I built a Blackfin tool-chain from scratch for -tip testing,
and it triggers:

 arch/blackfin/kernel/vmlinux.lds:1238: undefined section `.data_a_l1' referenced in expression

and:

 arch/blackfin/kernel/vmlinux.lds:1238: undefined section `.text_data_l1'
referenced in expression

Now i dont have any way to test this linker script, but it now at
least builds fine after fixing what appears to be typos in those
assert statements.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:30 -04:00
Graf Yang
1794131471 Blackfin: handle the core timer interrupt with handle_percpu_irq on SMP
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:29 -04:00
Mike Frysinger
926494943b Blackfin: optimize fixed code handling for the most common case
The majority of the time we are returning to user space, it is not in the
fixed atomic code region.  So rather than branch to a function where we
check the PC and return, do the check inline and branch only when needed.

Also, tweak some of the fixed code handling based on assumptions we are
aware of but cannot be expressed in C.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:28 -04:00
Barry Song
dac981740f Blackfin: delete '-spi' suffix in ad1836/ad1938 driver name
The ASoC drivers have dropped the redundant "-spi" suffix in the driver
name, so update the board resources accordingly.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:27 -04:00
Mike Frysinger
3aa670419a Blackfin: punt dead cache locking code
No one uses these functions, and some are duplicate of existing C code.  So
just punt the whole thing.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:25 -04:00
Mike Frysinger
0198b3bcae Blackfin: drop board resources for dead devices (pbx/ad9960)
These hardware devices are dead and the drivers never cleaned up/merged,
so punt the useless board resource info.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:24 -04:00
Yi Li
c4baebf268 Blackfin: do not trace the exception handler
Since the exception handler cannot cause exceptions, we cannot trace it
without easily causing double faults and crashing the system.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:23 -04:00
Mike Frysinger
7b06263bd7 Blackfin: fix BF522/BF523 max VCO mixup
The BF522 and BF523 had their real max VCO values swapped.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:22 -04:00
Graf Yang
ad46163ac2 Blackfin: SMP port does not yet support cpu frequency scaling
We have an item to get this fixed, but in the mean time, disable selection
via Kconfig dependencies.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:21 -04:00
Yi Li
eb7bd9c461 Blackfin: cleanup sync handling when enabling/disabling cplbs
The handling of updating the [DI]MEM_CONTROL MMRs does not follow proper
sync procedures as laid out in the Blackfin programming manual.  So rather
than audit/fix every call location, create helper functions that do the
right things in order to safely update these MMRs.  Then convert all call
sites to use these new helper functions.

While we're fixing the code, drop the workaround for anomaly 05000125 as
that anomaly applies to old versions of silicon that we do not support.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:19 -04:00
Barry Song
8312440e05 Blackfin: bf537-stamp: update ad1836 resources
Update the ad1836 resources for the new ASoC driver.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:18 -04:00