rtctest.c checks to see if PIE is functioning by testing if 20 interrupts occur
at rates from 2HZ to 64HZ. While this check is good, it does not check to
see if the correct amount of time has actually passed. This misses
situations where the RTC may be operating at a higher or lower frequency
than expected.
This patch introduces a simple check to verify if the time passed is
less than 10% of what was programmed into the RTC.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: corbet@lwn.net
Cc: rtc-linux@googlegroups.com
Cc: linux-doc@vger.kernel.org
Cc: a.zummo@towertech.it
Cc: prarit@redhat.com
Cc: john.stultz@linaro.org
Cc: shuahkh@osg.samsung.com
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This patch splits rtc.txt into two separate files, one for the
documentation itself, and the other for the rtctest.c file. The rtctest
file is moved into the kernel tools/testing/selftests/timers directory.
This will make automated testing easier. Note that the only difference in
the rtc.txt file is that the location of the rtctest.c file has changed.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: corbet@lwn.net
Cc: rtc-linux@googlegroups.com
Cc: linux-doc@vger.kernel.org
Cc: a.zummo@towertech.it
Cc: prarit@redhat.com
Cc: john.stultz@linaro.org
Cc: shuahkh@osg.samsung.com
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
gen_kselftest_tar.sh tool generates kselftest tar archive. This tool
supports uncompressed tar, gz, bz, and xz compression formats and the
default compression format is gzip. This tool runs kselftest install
tool as its back-end.
Usage:
cd tools/testing/selftests
./gen_kselftest_tar [ tar | targz | tarbz2 | tarxz ]
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
kselftest_install.sh tool installs selftests in default location
which is tools/testing/selftests/kselftest or an user specified
location. This tool invokes back-end selftests install target with
the install location.
Usage:
cd tools/testing/selftests
./kselftest_install.sh [ install_dir ]
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This avoids repeating the logic in every Makefile. We mimic the
top-level Makefile and use $(CROSS_COMPILE)gcc.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The bulk of the selftests are actually below the powerpc sub directory.
This adds support for installing them, when on a powerpc machine, or if
ARCH and CROSS_COMPILE are set appropriately.
This is a little more complicated because of the sub directory structure
under powerpc, but much of the common logic in lib.mk is still used. The
net effect of the patch is still a reduction in code.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Change the timers Makefile to make use of shared run and install logic
in lib.mk. Destructive tests are installed but not run by default.
Add a new variable, TEST_PROGS_EXTENDED, which is a list of extra
programs to install, but which are not run by the default run_tests
logic.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
In order to keep the kselftest Makefiles simpler, set the threadtest
default values to the ones used in standard run_tests
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Several tests that rely on implicit build rules fail to build,
when invoked from the main Makefile kselftest target. These
failures are due to --no-builtin-rules and --no-builtin-variables
options set in the inherited MAKEFLAGS.
--no-builtin-rules eliminates the use of built-in implicit rules
and --no-builtin-variables is for not defining built-in variables.
These two options override the use of implicit rules resulting in
build failures. In addition, inherited LDFLAGS result in build
failures and there is no need to define LDFLAGS. Clear LDFLAGS
and MAKEFLAG when make is invoked from the main Makefile kselftest
target. Fixing this at selftests Makefile avoids changing the main
Makefile and keeps this change self contained at selftests level.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
This patch changes the name of the make variable TARGETS, to prevent it
from colliding with a value set by the user on the command line (as they
are recommended to do by tools/testing/selftests/README.txt).
Without this patch, "make -C tools/testing/selftests TARGETS=powerpc"
will fail.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The goal is to verify vphn_unpack_associativity() parses VPHN numbers
correctly. We feed it with a variety of input values and compare with
expected results.
PAPR+ does not say much about VPHN parsing: I came up with a list of
tests that check many simple cases and some corner ones. I wouldn't
dare to say the list is exhaustive though.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
[mpe: Rework harness logic, rename to test-vphn, add -m64]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
The recent change to remove the vrX defines exposed the fact that we are
building the copyloops tests without altivec enabled. It depends on the
toolchain as to whether altivec is on by default or not, so it only
breaks on some toolchains. But we should always enable it.
Fixes: c2ce6f9f3d ("powerpc: Change vrX register defines to vX to match gcc and glibc")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As our various loops (copy, string, crypto etc) get more complicated,
we want to share implementations between userspace (eg glibc) and
the kernel. We also want to write userspace test harnesses to put
in tools/testing/selftest.
One gratuitous difference between userspace and the kernel is the
VMX register definitions - the kernel uses vrX whereas both gcc and
glibc use vX.
Change the kernel to match userspace.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds make install support to selftests. The basic usage is:
$ cd tools/testing/selftests
$ make install
That installs into tools/testing/selftests/install, which can then be
copied where ever necessary.
The install destination is also configurable using eg:
$ INSTALL_PATH=/mnt/selftests make install
The implementation uses two targets in the child makefiles. The first
"install" is expected to install all files into $(INSTALL_PATH).
The second, "emit_tests", is expected to emit the test instructions (ie.
bash script) on stdout. Separating this from install means the child
makefiles need no knowledge of the location of the test script.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This adds a Make include file which most selftests can then include to
get the run_tests logic.
On its own this has the advantage of some reduction in repetition, and
also means the pass/fail message is defined in fewer places.
However the key advantage is it will allow us to implement install very
simply in a subsequent patch.
The default implementation just executes each program in $(TEST_PROGS).
We use a variable to hold the default implementation of $(RUN_TESTS)
because that gives us a clean way to override it if necessary, ie. using
override. The mount, memory-hotplug and mqueue tests use that to provide
a different implementation.
Tests are not run via /bin/bash, so if they are scripts they must be
executable, we add a+x to several.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Adds the set-2038 test which sets the time to near-edge cases
like the start and end of the 32 bit epoch and checks that
time behaves properly. There is also a dangerous mode, which
lets the clock roll over past 2038 on 32bit systems, which
on some older kernels will cause system hangs.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This patch adds the set-tai test which ensures the tai offset
can be set properly from adjtimex.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This change adds the leapcrash test which tests to see if a
leapsecond deadlock which was observed from 2.6.26 to 3.3
is present on this system.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This change adds the leap-a-day test which sets STA_INS and
STA_DEL each day to trigger leapseconds each day. It also
has a mode to jump the time to right before the end of the
day each iteration.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Adds the clocksource-switch tests which continually switches the
current clocksource between all the available ones, watching for
any timekeeping inconsistencies.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This change adds the skew_consistency test, which twists the
ADJ_FREQUENCY knob back and forth and watches for timekeeping
inconsistencies.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This patch adds the change_skew test which validates the
adjtimex freq can be set to various values and then using
the inconsistency-check, raw_skew, and nanosleep tests
ensures time behaves properly.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This adds the alarmtimer-suspend test from the timetests suite,
which tests that the alarmtimers wake the system up from suspend
shortly after the time they were set to fire.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This adds a adjtimex validation test which checks the behavior
for a set of valida and invalid inputs. So far this only tests
ADJ_FREQUENCY, but hopefully will grow.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Add test to validate mqueue timeout latency from the timetest suite
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Add the threaded time inconsistency test from the timetest suite.
This checks for time inconsistencies between cpus, usually associated
with clock skew as sometimes found w/ TSCs.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Add my set-timer-lat test from the timetest suite. This
test checks the latency from set_timer and reports if
any are unreasonable (>40ms).
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This adds my clock skew estimation test from the timetest suite.
It measures the drift between CLOCK_MONOTONIC and CLOCK_MONOTONIC_RAW
and compares it with the current frequency value from adjtimex.
It sometimes can trigger false failures when ntpd isn't in a
steady state, but its a useful too when doing adjtimex testing.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Adds my nanosleep latency test from the timetest suite.
This checks to make sure we don't see "unreasonable"
latencies (> 40ms) when calling nanosleep.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This adds my inconsistency-test from my timetests suite,
which checks for (single threaded) time inconsistencies
across the various clockids.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Add my basic nanosleep test from my timetest suite.
This test validates that nanosleep doesn't return early
against a number of clockids.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The posix_timers.c test has a loop that tries to keep it in
kernel space, repeatedly calling brk(). However, it doesn't
check the return value, which causes warnings.
This patch adds a err value which captures the return value
and modifies the test so it will quit if a failure occurs.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Try to streamline the makefile so its easier to add timer/timekeeping
tests.
Also adds support for the CROSS_COMPILE variable.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This commit sets CONFIG_RCU_TORTURE_TEST_SLOW_INIT=y, but leaves the
default time zero. This can be overridden by passing the
"--bootargs rcutree.gp_init_delay=1" argument to kvm.sh.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
On systems which don't implement sys_execveat(), this test produces a
lot of output.
Add a check at the beginning to see if the syscall is present, and if
not just note one error and return.
When we run on a system that doesn't implement the syscall we will get
ENOSYS back from the kernel, so change the logic that handles
__NR_execveat not being defined to also use ENOSYS rather than -ENOSYS.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: David Drysdale <drysdale@google.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
o Added timings to various parts of the test (build, install,
boot, tests) and report them so that the users can keep
track of changes.
o Josh Poimboeuf fixed the console output to work better with
virtual machine targets.
o Various clean ups and fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU2VT1AAoJEEjnJuOKh9ldfgMH/A4N2zEzRDx/FGgvFVBF/NOl
AlwddMyyUsjolL9w+UGUTtXtyyWZFJWvuELaLYwfMF/qI1S+eAZeRQVStQ9UZhj0
ehjKj5ct8EKVCXgR6GUWvCgzLEbK5AQRPRKAkK9KGDmSdzRP22MU7sFj1ZyXGQCh
qqHMSnShXiXzEipqg6Oee8gC1IQIjskulcbB4IqGNMYNN/WJXiVGZUVsMLatb09i
HXz+8P2lh6u1MWb3EX0YvvrZohKgyYf/17V3Hm0JBxLEAFNOkD6q9BqBCRi9LvcU
5vWA+vcvT6+wjXICL0UmiSZbU/JBD0D6vDkGIAqdluaAvf31gsuNTUrLx6RbW10=
=/rWI
-----END PGP SIGNATURE-----
Merge tag 'ktest-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
"The following ktest updates were done:
o Added timings to various parts of the test (build, install, boot,
tests) and report them so that the users can keep track of changes.
o Josh Poimboeuf fixed the console output to work better with virtual
machine targets.
o Various clean ups and fixes"
* tag 'ktest-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Place quotes around item variable
ktest: Cleanup terminal on dodie() failure
ktest: Print build,install,boot,test times at success and failure
ktest: Enable user input to the console
ktest: Give console process a dedicated tty
ktest: Rename start_monitor_and_boot to start_monitor_and_install
ktest: Show times for build, install, boot and test
ktest: Restore tty settings after closing console
ktest: Add timings for commands
Including:
- Update of all defconfigs
- Addition of a bunch of config options to modernise our defconfigs
- Some PS3 updates from Geoff
- Optimised memcmp for 64 bit from Anton
- Fix for kprobes that allows 'perf probe' to work from Naveen
- Several cxl updates from Ian & Ryan
- Expanded support for the '24x7' PMU from Cody & Sukadev
- Freescale updates from Scott:
"Highlights include 8xx optimizations, some more work on datapath device
tree content, e300 machine check support, t1040 corenet error reporting,
and various cleanups and fixes."
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=xDU3
-----END PGP SIGNATURE-----
Merge tag 'powerpc-3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux
Pull powerpc updates from Michael Ellerman:
- Update of all defconfigs
- Addition of a bunch of config options to modernise our defconfigs
- Some PS3 updates from Geoff
- Optimised memcmp for 64 bit from Anton
- Fix for kprobes that allows 'perf probe' to work from Naveen
- Several cxl updates from Ian & Ryan
- Expanded support for the '24x7' PMU from Cody & Sukadev
- Freescale updates from Scott:
"Highlights include 8xx optimizations, some more work on datapath
device tree content, e300 machine check support, t1040 corenet
error reporting, and various cleanups and fixes"
* tag 'powerpc-3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (102 commits)
cxl: Add missing return statement after handling AFU errror
cxl: Fail AFU initialisation if an invalid configuration record is found
cxl: Export optional AFU configuration record in sysfs
powerpc/mm: Warn on flushing tlb page in kernel context
powerpc/powernv: Add OPAL soft-poweroff routine
powerpc/perf/hv-24x7: Document sysfs event description entries
powerpc/perf/hv-gpci: add the remaining gpci requests
powerpc/perf/{hv-gpci, hv-common}: generate requests with counters annotated
powerpc/perf/hv-24x7: parse catalog and populate sysfs with events
perf: define EVENT_DEFINE_RANGE_FORMAT_LITE helper
perf: add PMU_EVENT_ATTR_STRING() helper
perf: provide sysfs_show for struct perf_pmu_events_attr
powerpc/kernel: Avoid initializing device-tree pointer twice
powerpc: Remove old compile time disabled syscall tracing code
powerpc/kernel: Make syscall_exit a local label
cxl: Fix device_node reference counting
powerpc/mm: bail out early when flushing TLB page
powerpc: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)
perf/powerpc: reset event hw state when adding it to the PMU
powerpc/qe: Use strlcpy()
...
Seems that some of the new console logic causes doprint to possibly
get evaluated. When printing a commit message that contains parenthesis,
it fails with a shell parsing error.
This gets fixed when we add quotes around the $item variable, and prevent
it from being evaluated by any shell commands.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If dodie() is called with the console open, restore the terminal's
original settings before dying.
Link: http://lkml.kernel.org/r/20150130025453.GB20952@treble.redhat.com
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Since both success and failure may shortcut and exit ktest, it is better
to print the status times there too. Once times are printed, the values
for the times are reset, so they will not print more than once.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function start_monitor_and_boot is a misnomer. It use to, but
now it starts the monitor and installs. It does not boot. Rename it
before I get confused by it again.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Seeing the times for how long a build, install, reboot and the
test takes is helpful for analyzing the test process. Seeing
how different changes affect the timings.
Show the build, install, boot and test times when at the end of
the test, or between each interval for tests that do those
mulitple times (like bisect and patchcheck).
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When ktest runs the console program as a child process, the parent and
child share the same tty for stdin and stderr. This is problematic when
using a libvirt target. The "virsh console" program makes a lot of
changes to the tty settings, making ktest's output hard to read
(carriage returns don't work). After ktest exits, the terminal is
unusable (CRs broken, stdin isn't echoed).
I think the best way to fix this issue would be to create a
pseudoterminal (pty pair) so the child process would have a dedicated
tty, and then use pipes to connect the two ttys. I'm not sure if that's
overkill, but it's far beyond my current Perl abilities.
This patch is a much easier way to (partially) fix this issue. It saves
the tty settings before opening the console and restores them after
closing it. There are still a few places where ktest prints mangled
output while the console is open, but the output is much more legible
overall, and the terminal works just fine after ktest exits.
Link: http://lkml.kernel.org/r/1bb89abc0025cf1d6da657c7ba58bbeb4381a515.1422382008.git.jpoimboe@redhat.com
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
I find that I usually like to see how long a make or other command takes,
and adding a start and end time and reporting how long each command runs
(in seconds) is helpful.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch includes all of the powerpc test binaries into the .gitignore
file listing in their respective directories. This will make sure that
git ignores all of these test binaries when displaying status.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull RCU updates from Paul E. McKenney:
- Documentation updates.
- Miscellaneous fixes.
- Preemptible-RCU fixes, including fixing an old bug in the
interaction of RCU priority boosting and CPU hotplug.
- SRCU updates.
- RCU CPU stall-warning updates.
- RCU torture-test updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A system misconfiguration that prevents qemu from running at all (for
example, a missing dynamically linked library) will keep the console.log
file from the previous run. This can fool the developer into thinking
that this failed run actually completed correctly. This commit therefore
overwrites the console.log file just before launching qemu.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
More recent qemu implementations really want "-enable-kvm", and the
"-soundhw pcspk" makes the script a bit less dependent on odd audio
libraries being installed. This commit therefore adds both to the
default qemu command line.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The mpstat command recently added the %gnice column, which messes up
the cpu2use.sh script's idle-CPU calculations. This commit therefore
uses $NF instead of $12 to select the last (%idle) column.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Normal rcutorture checking overestimates grace periods somewhat due to
the fact that there is a delay from a grace-period request until the
start of the corresponding grace period and another delay from the end
of that grace period to notification of the requestor. This means that
rcutorture's detection of RCU bugs is less sensitive than it might be.
It turns out that rcutorture also checks the underlying grace-period
"completed" counter (displayed in Reader Batch output), which in theory
allows rcutorture to do exact checks. In practice, memory misordering
(by both compiler and CPU) can result in false positives. However,
experience on x86 shows that these false positives are quite rare,
occurring less than one time per 1,000 hours of testing. This commit
therefore does the exact checking, giving a warning if any Reader Batch
blows happen, and flagging an error if they happen more often than
once every three hours in long tests.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
add -lrt to fix undefined reference to `clock_gettime'
error seen when the test is compiled using gcc 4.6.4.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
We can't use a char type to check for a negative return value since char
isn't guaranteed to be signed. Indeed, the char type tends to be unsigned on
ARM.
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
When the shell fails to invoke a script because its path name
is too long (ENAMETOOLONG), most shells return 127 to indicate
command not found. However, some systems report 126 (which POSIX
suggests should indicate a non-executable file) for this case,
so allow that too.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David Drysdale <drysdale@google.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The current rcutorture scripting checks for actual stalls (via the "Call
Trace:" check), but fails to spot the case where a stall ends just as it
is being detected. This commit therefore adds a check for this case.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
On 32-bit:
execveat.c: In function 'check_execveat_pathmax':
execveat.c:183: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'size_t'
execveat.c:187: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'size_t'
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This list is supposed to be sorted, to reduce patch collisions.
Cc: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull user namespace related fixes from Eric Biederman:
"As these are bug fixes almost all of thes changes are marked for
backporting to stable.
The first change (implicitly adding MNT_NODEV on remount) addresses a
regression that was created when security issues with unprivileged
remount were closed. I go on to update the remount test to make it
easy to detect if this issue reoccurs.
Then there are a handful of mount and umount related fixes.
Then half of the changes deal with the a recently discovered design
bug in the permission checks of gid_map. Unix since the beginning has
allowed setting group permissions on files to less than the user and
other permissions (aka ---rwx---rwx). As the unix permission checks
stop as soon as a group matches, and setgroups allows setting groups
that can not later be dropped, results in a situtation where it is
possible to legitimately use a group to assign fewer privileges to a
process. Which means dropping a group can increase a processes
privileges.
The fix I have adopted is that gid_map is now no longer writable
without privilege unless the new file /proc/self/setgroups has been
set to permanently disable setgroups.
The bulk of user namespace using applications even the applications
using applications using user namespaces without privilege remain
unaffected by this change. Unfortunately this ix breaks a couple user
space applications, that were relying on the problematic behavior (one
of which was tools/selftests/mount/unprivileged-remount-test.c).
To hopefully prevent needing a regression fix on top of my security
fix I rounded folks who work with the container implementations mostly
like to be affected and encouraged them to test the changes.
> So far nothing broke on my libvirt-lxc test bed. :-)
> Tested with openSUSE 13.2 and libvirt 1.2.9.
> Tested-by: Richard Weinberger <richard@nod.at>
> Tested on Fedora20 with libvirt 1.2.11, works fine.
> Tested-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
> Ok, thanks - yes, unprivileged lxc is working fine with your kernels.
> Just to be sure I was testing the right thing I also tested using
> my unprivileged nsexec testcases, and they failed on setgroup/setgid
> as now expected, and succeeded there without your patches.
> Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com>
> I tested this with Sandstorm. It breaks as is and it works if I add
> the setgroups thing.
> Tested-by: Andy Lutomirski <luto@amacapital.net> # breaks things as designed :("
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
userns: Unbreak the unprivileged remount tests
userns; Correct the comment in map_write
userns: Allow setting gid_maps without privilege when setgroups is disabled
userns: Add a knob to disable setgroups on a per user namespace basis
userns: Rename id_map_mutex to userns_state_mutex
userns: Only allow the creator of the userns unprivileged mappings
userns: Check euid no fsuid when establishing an unprivileged uid mapping
userns: Don't allow unprivileged creation of gid mappings
userns: Don't allow setgroups until a gid mapping has been setablished
userns: Document what the invariant required for safe unprivileged mappings.
groups: Consolidate the setgroups permission checks
mnt: Clear mnt_expire during pivot_root
mnt: Carefully set CL_UNPRIVILEGED in clone_mnt
mnt: Move the clear of MNT_LOCKED from copy_tree to it's callers.
umount: Do not allow unmounting rootfs.
umount: Disallow unprivileged mount force
mnt: Update unprivileged remount test
mnt: Implicitly add MNT_NODEV on remount when it was implicitly added by mount
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=DL3K
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan:
"kselftest updates for 3.19-rc1:
- kcmp test include file cleanup
- kcmp change to build on all architectures
- A light weight kselftest framework that provides a set of
interfaces for tests to use to report results. In addition,
several tests are updated to use the framework.
- A new runtime system size test that prints the amount of RAM that
the currently running system is using"
* tag 'linux-kselftest-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftest: size: Add size test for Linux kernel
selftests/kcmp: Always try to build the test
selftests/kcmp: Don't include kernel headers
kcmp: Move kcmp.h into uapi
selftests/timers: change test to use ksft framework
selftests/kcmp: change test to use ksft framework
selftests/ipc: change test to use ksft framework
selftests/breakpoints: change test to use ksft framework
selftests: add kselftest framework for uniform test reporting
selftests/user: move test out of Makefile into a shell script
selftests/net: move test out of Makefile into a shell script
Merge second patchbomb from Andrew Morton:
- the rest of MM
- misc fs fixes
- add execveat() syscall
- new ratelimit feature for fault-injection
- decompressor updates
- ipc/ updates
- fallocate feature creep
- fsnotify cleanups
- a few other misc things
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (99 commits)
cgroups: Documentation: fix trivial typos and wrong paragraph numberings
parisc: percpu: update comments referring to __get_cpu_var
percpu: update local_ops.txt to reflect this_cpu operations
percpu: remove __get_cpu_var and __raw_get_cpu_var macros
fsnotify: remove destroy_list from fsnotify_mark
fsnotify: unify inode and mount marks handling
fallocate: create FAN_MODIFY and IN_MODIFY events
mm/cma: make kmemleak ignore CMA regions
slub: fix cpuset check in get_any_partial
slab: fix cpuset check in fallback_alloc
shmdt: use i_size_read() instead of ->i_size
ipc/shm.c: fix overly aggressive shmdt() when calls span multiple segments
ipc/msg: increase MSGMNI, remove scaling
ipc/sem.c: increase SEMMSL, SEMMNI, SEMOPM
ipc/sem.c: change memory barrier in sem_lock() to smp_rmb()
lib/decompress.c: consistency of compress formats for kernel image
decompress_bunzip2: off by one in get_next_block()
usr/Kconfig: make initrd compression algorithm selection not expert
fault-inject: add ratelimit option
ratelimit: add initialization macro
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Pq+D
-----END PGP SIGNATURE-----
Merge tag 'docs-for-linus' of git://git.lwn.net/linux-2.6
Pull documentation update from Jonathan Corbet:
"Here's my set of accumulated documentation changes for 3.19.
It includes a couple of additions to the coding style document, some
fixes for minor build problems within the documentation tree, the
relocation of the kselftest docs, and various tweaks and additions.
A couple of changes reach outside of Documentation/; they only make
trivial comment changes and I did my best to get the required acks.
Complete with a shiny signed tag this time around"
* tag 'docs-for-linus' of git://git.lwn.net/linux-2.6:
kobject: grammar fix
Input: xpad - update docs to reflect current state
Documentation: Build mic/mpssd only for x86_64
cgroups: Documentation: fix wrong cgroupfs paths
Documentation/email-clients.txt: add info about Claws Mail
CodingStyle: add some more error handling guidelines
kselftest: Move the docs to the Documentation dir
Documentation: fix formatting to make 's' happy
Documentation: power: Fix typo in Documentation/power
Documentation: vm: Add 1GB large page support information
ipv4: add kernel parameter tcpmhash_entries
Documentation: Fix a typo in mailbox.txt
treewide: Fix typo in Documentation/DocBook/device-drivers
CodingStyle: Add a chapter on conditional compilation
A security fix in caused the way the unprivileged remount tests were
using user namespaces to break. Tweak the way user namespaces are
being used so the test works again.
Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
o Fix handling the make kernelrelease change
o Fix make_min_config that was broken by new bisect_config changes
o Allow tests to undefine default options (not just being able to override
them)
o Print name of test (if defined) to start of test output
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUheY3AAoJEEjnJuOKh9ld+CgH/16NxltuIVFMTDB+I7AP/ixV
YP2m4dGn0wrzg8GhZNJX7x9irh8Shg5da4mjqH163qylNfQl7QuALzs5c7B3ZDv3
dQa2GMR34/bUbcqejrZm7fcwRH8yw1E88hAs71CNM+PMW1AAe8CBth2ogCXC/V8N
uln7Fr0aS3Y/sPxWzkCp4Y8ZAsoRMei3igfnJUPu0a1p7pyKaN0ne060S5znWYwl
8fW4DACR1EppMmfwdslORN9miPol4nuBQICmqNM6shtJaef6yb9aErSiTTT4m4PK
RIpWZasmosKBIeIkTXWxLhr3liEFTMm3BsflD+YUnIM7cLFziHGDp6ThH3TwwSo=
=Y3vY
-----END PGP SIGNATURE-----
Merge tag 'ktest-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest changes from Steven Rostedt:
"The following ktest updates were done:
- Fix handling the make kernelrelease change
- Fix make_min_config that was broken by new bisect_config changes
- Allow tests to undefine default options (not just being able to
override them)
- Print name of test (if defined) to start of test output"
* tag 'ktest-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Add back "tail -1" to kernelrelease make
ktest: Add name to running title
ktest: Allow tests to undefine default options
ktest: Fix make_min_config to handle new assign_configs call
ktest: Use make -s kernelrelease
o Added kprobes on ftrace testcase
o Sort test cases
o Add file to hold helper functions
o Use logfile name supported by busybox's mktemp
o Clear trace buffer after running kprobe test
o Fix show descriptions when run on dash shell
o Add --verbose option for showing echo output
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUhbSvAAoJEEjnJuOKh9ldB84H+gNuE2PPvsxmgSxFP0bdo+Uw
k/8C2QBU6xLXZFZvqXnH7P0gLP2OIjpOBOTKt+yjkB/Elm+XnMVV1Xy+k7VLBiMD
g+DRoIcpJL2dOy/D8t/P4SjVNXt4Btwxf/tCTabbubLc+aBmvkEG4DL2Vk/Xl5+Y
XH1dBgYvI9irAxgnYpBnPlN7WIWg1+WCshdOtqkNGRuyJ1G9gn0VlxGmNF7B+0ye
cjFj19loPMGzmYBDgGCa9ypQHEP1F97t+WUEDrwCZsXLtaA7Z4bumXTrxKQWsmdT
bDZQTEFcQ9EYQGvqbaz+nHb94P8cyFrSNvSiAAqhuc2ZqigYWUYDEvFjYxSSGAE=
=eiD2
-----END PGP SIGNATURE-----
Merge tag 'ftracetest-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace self-test updates from Steven Rostedt:
"Updates for the ftrace self tests:
- Added kprobes on ftrace testcase
- Sort test cases
- Add file to hold helper functions
- Use logfile name supported by busybox's mktemp
- Clear trace buffer after running kprobe test
- Fix show descriptions when run on dash shell
- Add --verbose option for showing echo output"
* tag 'ftracetest-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftracetest: Add --verbose option for showing echo output
ftracetest: Fix to show descriptions on dash
ftracetest: Add basic event tracing test cases
ftracetest: Clear trace buffer after running kprobe testcases
ftracetest: Use logfile name supported by busybox's mktemp
ftracetest: Add a couple of ftrace test cases
ftracetest: Add functions file that holds helper functions
ftracetest: Sort testcases
ftracetest: Add kprobes on ftrace testcase
Add --verbose/-v option for showing echo output in testcases.
This is good for checking the progress of testcases which
take a longer time to run.
To implement this feature, all the testcase failures are
captured in ftracetest and send signal to set SIG_RESULT=FAIL.
Link: http://lkml.kernel.org/r/20141204194123.7376.22964.stgit@localhost.localdomain
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ftracetest doesn't show testcase's descriptions when
it is executed on dash. This fixes that to show the
descriptions on dash correctly by passing it via a variable
instead of directly passing the grep command output.
Link: http://lkml.kernel.org/r/20141204194116.7376.78940.stgit@localhost.localdomain
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This test shows the amount of memory used by the system.
Note that this is dependent on the user-space that is loaded
when this program runs. Optimally, this program would be
run as the init program itself.
The program is optimized for size itself, to avoid conflating
its own execution with that of the system software.
The code is compiled statically, with no stdlibs. On my x86_64 system,
this results in a statically linked binary of less than 5K.
Signed-off-by: Tim Bird <tim.bird@sonymobile.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Don't prevent the test building on non-x86. Just try and build it and
let the chips fall where they may.
Add support for CROSS_COMPILE while we're at it. Also we don't need a
custom rule for building kcmp_test.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The kcmp test mucks with the include path to bring in the kernel
headers, and x86 headers too for reasons that are not clear.
Now that kcmp.h is exported none of that should be necessary.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
- MNT_NODEV should be irrelevant except when reading back mount flags,
no longer specify MNT_NODEV on remount.
- Test MNT_NODEV on devpts where it is meaningful even for unprivileged mounts.
- Add a test to verify that remount of a prexisting mount with the same flags
is allowed and does not change those flags.
- Cleanup up the definitions of MS_REC, MS_RELATIME, MS_STRICTATIME that are used
when the code is built in an environment without them.
- Correct the test error messages when tests fail. There were not 5 tests
that tested MS_RELATIME.
Cc: stable@vger.kernel.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Also, adjust the formatting a bit, and expand the section about using
TARGETS= on the make command line.
Signed-off-by: Tim Bird <tim.bird@sonymobile.com>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Commit 52d21580b3 "ktest: Use make -s kernelrelease" fixed commit
7ff525712a "kbuild: fake the "Entering directory ..." message more simply"
as that commit added output after the make kernelrelease. But there's still
some build scripts that are used by ktest that has output before the make
is executed, and requires that only the last line is printed.
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Instead of just showing the test type of test in the start of the
test, like this:
RUNNING TEST 1 of 26 with option build defconfig
Add the name (if it is defined) as well, like this:
RUNNING TEST 1 of 26 (arm64 aarch64-linux) with option build defconfig
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Tests can set options that override the default ones. But if a test
tries to undefine a default option, it is simply ignored and the
default option stays as is.
For example, if you want to have a test that defines no MIN_CONFIG
then the test should be able to do that with:
TEST_START
MIN_CONFIG =
Which should make MIN_CONFIG not defined for that test. But the way
the code currently works, undefined options in tests are dropped.
This is because the NULL options are evaluated during the reading of
the config file and since one can disable default options in the default
section with this method, it is evaluated there (the option turns to a
undef). But undef options in the test section mean to use the default
option.
To fix this, keep the empty string in the option during the reading
of the config file, and then evaluate it when running the test. This
will allow tests to null out default options.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit 6071c22e17 "ktest: Rewrite the config-bisect to actually work"
fixed the config-bisect to work nicely but in doing so it broke
make_min_config by changing the way assign_configs works.
The assign_configs function now adds the config to the hash even if
it is disabled, but changes the hash value to be that of the
line "# CONFIG_FOO is not set". Unfortunately, the make_min_config
test only checks to see if the config is removed. It now needs to
check if the config is in the hash and not set to be disabled.
Cc: stable@vger.kernel.org # 3.17+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The previous tail -1 broke with commit 7ff525712a ("kbuild: fake the
"Entering directory ..." message more simply")
Link: http://lkml.kernel.org/r/20141022194408.GA20989@pobox.suse.cz
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Change ipc test to use kselftest framework to report
test results. With this change this test exits with
EXIT_FAIL instead of -errno. Changed print errno in
test fail messages to not loose that information.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Add kselftest framework for tests to use. This is a light
weight framework provides a set of interfaces to report test
results. Tests can use these interfaces to report pass, and
fail cases as well as when failure is due to configuration
problems such as missing modules, or when a test that is should
fail, fails as expected, and a test that should fail, passes.
The framework uses POSIX standard return codes for reporting
results to address the needs of users that want to run the kernel
selftests from their user-space test suites and want to know why a
test failed. In addition, the framework includes interfaces to use
to report test statistics on number of tests passed and failed.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Currently user copy test is run from the Makefile. Move it out
of the Makefile to be run from a shell script to allow the test
to be run as stand-alone test, in addition to allowing the test
run from a make target.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Pull networking fixes from David Miller:
1) sunhme driver lacks DMA mapping error checks, based upon a report by
Meelis Roos.
2) Fix memory leak in mvpp2 driver, from Sudip Mukherjee.
3) DMA memory allocation sizes are wrong in systemport ethernet driver,
fix from Florian Fainelli.
4) Fix use after free in mac80211 defragmentation code, from Johannes
Berg.
5) Some networking uapi headers missing from Kbuild file, from Stephen
Hemminger.
6) TUN driver gets csum_start offset wrong when VLAN accel is enabled,
and macvtap has a similar bug, from Herbert Xu.
7) Adjust several tunneling drivers to set dev->iflink after registry,
because registry sets that to -1 overwriting whatever we did. From
Steffen Klassert.
8) Geneve forgets to set inner tunneling type, causing GSO segmentation
to fail on some NICs. From Jesse Gross.
9) Fix several locking bugs in stmmac driver, from Fabrice Gasnier and
Giuseppe CAVALLARO.
10) Fix spurious timeouts with NewReno on low traffic connections, from
Marcelo Leitner.
11) Fix descriptor updates in enic driver, from Govindarajulu
Varadarajan.
12) PPP calls bpf_prog_create() with locks held, which isn't kosher.
Fix from Takashi Iwai.
13) Fix NULL deref in SCTP with malformed INIT packets, from Daniel
Borkmann.
14) psock_fanout selftest accesses past the end of the mmap ring, fix
from Shuah Khan.
15) Fix PTP timestamping for VLAN packets, from Richard Cochran.
16) netlink_unbind() calls in netlink pass wrong initial argument, from
Hiroaki SHIMODA.
17) vxlan socket reuse accidently reuses a socket when the address
family is different, so we have to explicitly check this, from
Marcelo Lietner.
18) Fix missing include in nft_reject_bridge.c breaking the build on ppc
and other architectures, from Guenter Roeck.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits)
vxlan: Do not reuse sockets for a different address family
smsc911x: power-up phydev before doing a software reset.
lib: rhashtable - Remove weird non-ASCII characters from comments
net/smsc911x: Fix delays in the PHY enable/disable routines
net/smsc911x: Fix rare soft reset timeout issue due to PHY power-down mode
netlink: Properly unbind in error conditions.
net: ptp: fix time stamp matching logic for VLAN packets.
cxgb4 : dcb open-lldp interop fixes
selftests/net: psock_fanout seg faults in sock_fanout_read_ring()
net: bcmgenet: apply MII configuration in bcmgenet_open()
net: bcmgenet: connect and disconnect from the PHY state machine
net: qualcomm: Fix dependency
ixgbe: phy: fix uninitialized status in ixgbe_setup_phy_link_tnx
net: phy: Correctly handle MII ioctl which changes autonegotiation.
ipv6: fix IPV6_PKTINFO with v4 mapped
net: sctp: fix memory leak in auth key management
net: sctp: fix NULL pointer dereference in af->from_addr_param on malformed packet
net: ppp: Don't call bpf_prog_create() in ppp_lock
net/mlx4_en: Advertize encapsulation offloads features only when VXLAN tunnel is set
cxgb4 : Fix bug in DCB app deletion
...
The while loop in sock_fanout_read_ring() checks mmap region
bounds after access, causing it to segfault. Fix it to check
count before accessing header->tp_status. This problem can be
reproduced consistently when the test in run as follows:
make -C tools/testing/selftests TARGETS=net run_tests
or
make run_tests from tools/testing/selftests
or
make run_test from tools/testing/selftests/net
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When I run the ftracetest in a busybox docker container, I saw
following error. Make the logfile template to comply with busybox's
mktemp. It also keep the logfiles under the logs directory.
# /linux/tools/testing/selftests/ftrace/ftracetest
=== Ftrace unit tests ===
mktemp: unrecognized option `--tmpdir=/linux/tools/testing/selftests/ftrace/logs/20141106-003624/'
BusyBox v1.22.1 (2014-05-22 23:22:11 UTC) multi-call binary.
Usage: mktemp [-dt] [-p DIR] [TEMPLATE]
Create a temporary file with name based on TEMPLATE and print its name.
TEMPLATE must end with XXXXXX (e.g. [/dir/]nameXXXXXX).
Without TEMPLATE, -t tmp.XXXXXX is assumed.
-d Make directory, not file
-q Fail silently on errors
-t Prepend base directory name to TEMPLATE
-p DIR Use DIR as a base directory (implies -t)
-u Do not create anything; print a name
Base directory is: -p DIR, else $TMPDIR, else /tmp
[1] Basic trace file check/linux/tools/testing/selftests/ftrace/ftracetest: line 244: can't create : nonexistent directory
/linux/tools/testing/selftests/ftrace/ftracetest: line 244: can't create : nonexistent directory
[FAIL]
Link: http://lkml.kernel.org/r/1415239470-28705-1-git-send-email-namhyung@kernel.org
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Added three test cases to get the feel of adding tests to ftracetest.
The three cases are:
function profiling test, to make sure function profiling still works
with function tracing (was a regression)
function graph filter test to make sure that function graph filtering works.
function graph filter with stack tracing test to make sure that the function
graph filter does filter and also continues to filter when another function tracer
is running (like the stack tracer)
Link: http://lkml.kernel.org/r/20141103212737.696365174@goodmis.org
Link: http://lkml.kernel.org/r/20141104153028.602754370@goodmis.org
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Created the file tools/testing/ftrace/test.d/functions that will
hold helper functions.
Current helper functions include:
Add clear_trace() helper to reset the trace file
Used as a descriptive name to show that "echo > trace" is clearing
the trace file.
Add disable/enable_tracing() helper calls
Add calls that disable and enable tracing respectively by echoing
0 or 1 into tracing_on.
Add helper reset_tracer() function
Add a helper function reset_tracer() that will clear the current_tracer
(echo nop > current_tracer).
Link: http://lkml.kernel.org/r/20141103212737.696365174@goodmis.org
Link: http://lkml.kernel.org/r/20141104153028.465517119@goodmis.org
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently bpf test run from the Makefile. Move it out of the
Makefile to be run from a shell script to allow the test to
be run as stand-alone test, in addition to allowing the test
run from a make target.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: David S. Miller <davem@davemloft.net>
mounted in two locations caused the ftracetests to fail. This is because
the ftracetests script does a grep of the /proc/mounts file to find
where the debugfs file system is mounted. If it is mounted twice, then
the grep returns two lines instead of just one. This causes the ftracetests
to get confused and fail.
Use "head -1" to only return the first mount point for debugfs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUV812AAoJEEjnJuOKh9ldquIIAK1DeSn6QQrA2qytqZmaW/dh
M1QiG+Ot5Qh7+qli7Sun5E58jbMvclPCiHrtr44KEGDSzABrjjv8TnqCwI9XKfiO
hn9IGFy2gCU7jNMdE+1MRPwykVwLjYBZLaLyxY/WvwJTtlPORezq7KTdvUPgobCN
hQfxPyowofbGTsV9+75olSo9ercOKGv4NSopY2fj6fag185emUDLT4GGWGsWh/1j
heUhe4vYuuB43YAVgk+XeJEOQ8u4uME9lTocuykISazXupZo4+RfZzQPziD5Q/Mt
LuOg4zUpG7fX2AkECXvTR055CcCVVHKUTBZppIpeKqfAXBU6GeoaP1AM2CDx72I=
=jKWc
-----END PGP SIGNATURE-----
Merge tag 'ftracetest-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftracetest fix from Steven Rostedt:
"Running the ftracetests on a machine that had the debugfs file system
mounted in two locations caused the ftracetests to fail. This is
because the ftracetests script does a grep of the /proc/mounts file to
find where the debugfs file system is mounted. If it is mounted
twice, then the grep returns two lines instead of just one. This
causes the ftracetests to get confused and fail.
Use "head -1" to only return the first mount point for debugfs"
* tag 'ftracetest-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftracetest: Take the first debugfs mount found
Now that we have removed configs based on kernel version, we can also remove the
kversion parameter in kvm.sh.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Remove rcutorture configuration files which are no longer necessary.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Add config and boot parameters to enable the self tests in rcutorture testing.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcutorture scripts create a qemu-cmd script containing the actual
qemu command. However, this command references the build directory,
which will be overwritten by later builds. This commit therefore runs
the kernel out of the results directory so that less hand-editing is
required to re-run a previous test.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Add a kprobes on ftrace testcase. The testcase verifies that
- enabling and disabling function tracing works on a function which
already contains a dynamic kprobe
- adding and removing a dynamic kprobe works on a function which is
already enabled for function tracing
Link: http://lkml.kernel.org/p/1413802323-5297-2-git-send-email-heiko.carstens@de.ibm.com
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Running ftracetests on a box that mounted debugfs in two locations
made the ftracetests fail. This is because the tests uses a grep
of debugfs from the /proc/mounts file to find the debugfs mount
point, and then appends "/tracing" to that string to get the tracing
directory.
If the debugfs directory is mounted twice, then that grep will return
two answers and appending "/tracing" to a string with two lines will
not work.
Use "head -1" to only take the first mount point found.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
PREEMPT_RCU and TREE_PREEMPT_RCU serve the same function after
TINY_PREEMPT_RCU has been removed. This patch removes TREE_PREEMPT_RCU
and uses PREEMPT_RCU config option in its place.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Rename CONFIG_RCU_BOOST_PRIO to CONFIG_RCU_KTHREAD_PRIO and use this
value for both the per-CPU kthreads (rcuc/N) and the rcu boosting
threads (rcub/n).
Also, create the module_parameter rcutree.kthread_prio to be used on
the kernel command line at boot to set a new value (rcutree.kthread_prio=N).
Signed-off-by: Clark Williams <clark.williams@gmail.com>
[ paulmck: Ported to rcu/dev, applied Paul Bolle and Peter Zijlstra feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The CONFIG_RCU_CPU_STALL_VERBOSE Kconfig parameter causes preemptible
RCU's CPU stall warnings to dump out any preempted tasks that are blocking
the current RCU grace period. This information is useful, and the default
has been CONFIG_RCU_CPU_STALL_VERBOSE=y for some years. It is therefore
time for this commit to remove this Kconfig parameter, so that future
kernel builds will always act as if CONFIG_RCU_CPU_STALL_VERBOSE=y.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Pull RCU updates from Ingo Molnar:
"The main changes in this cycle were:
- changes related to No-CBs CPUs and NO_HZ_FULL
- RCU-tasks implementation
- torture-test updates
- miscellaneous fixes
- locktorture updates
- RCU documentation updates"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits)
workqueue: Use cond_resched_rcu_qs macro
workqueue: Add quiescent state between work items
locktorture: Cleanup header usage
locktorture: Cannot hold read and write lock
locktorture: Fix __acquire annotation for spinlock irq
locktorture: Support rwlocks
rcu: Eliminate deadlock between CPU hotplug and expedited grace periods
locktorture: Document boot/module parameters
rcutorture: Rename rcutorture_runnable parameter
locktorture: Add test scenario for rwsem_lock
locktorture: Add test scenario for mutex_lock
locktorture: Make torture scripting account for new _runnable name
locktorture: Introduce torture context
locktorture: Support rwsems
locktorture: Add infrastructure for torturing read locks
torture: Address race in module cleanup
locktorture: Make statistics generic
locktorture: Teach about lock debugging
locktorture: Support mutexes
locktorture: Add documentation
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJUMr9WAAoJEAsCRMQNDUMcEDoP/24bG92X33inVd3QafO7bYl/
PHHdB6xwM+ino5Ot0Ws85aqHM/KVmmXM7rke8/WFbVA5nmpvjvybAm5VzmgVa/CE
V8SAPrdn5CjnukhZhgOLiTJCJ7hzRn5+DDw+fuiZNhQBy3Abnywz3s4gcJ1+g3la
/DUZ3VL+5+bxJ7PYyRKFlAsLXLZdPc8uvw6U5FFPj0lh9T2T0yJZrTEgCBjsKoYS
rL7s0akd3NHtq/Xa3efJYrcXx4QsyA1nK9eflcp0QE8Kd9mhEu5f9ftFlmFnROj6
3BksB9aWRj370KL1acQbQWnK7fTfSMdQRpQErStC8sQnMBPJ4sa798o8V+9qYkVo
4gj+BScMUs/3JydKNelynJVc6AMn847xzaO+PszBQtTmPpHtP7YGl0fEqMigLGqb
SkTBfwICr/tSGza4nTDdBKLvi01UM3fQYfICmk3zWzNoWBw5mJVKJkzbetBZF8vq
mjb9T1VgDp9EQov4vmJVB9c6hUMXqaOEYs5yzIRsAb7jJihaRI9bZm0el8CfoJ8Q
9APQv0bob/lwNXXJhmeubRwDnNVHE85M3FTspRPBtD7nI7u32Y47KIegM7MMz6Yi
U2x8iCusyHEoBsPGZBzGXZxFqTpI/Bpa20zaYMOL79D91PmSagTqS+8JCd+9KFgN
fOUvXVByrYlG2y3tM2IN
=J1XN
-----END PGP SIGNATURE-----
Merge tag 'kselftest-3.18-updates-1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- fix for missing arguments to printf
- fix to build failures on 32-bit systems.
- enhancement to run memfd_test run on all architectures as most
architectures support __NR_memfd_create
* tag 'kselftest-3.18-updates-1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/memfd: Run test on all architectures
memfd_test: Add missing argument to printf()
memfd_test: Make it work on 32-bit systems
tools/testing/selftest directory called "ftrace" that holds tests
aimed at testing ftrace and subsystems that use ftrace (like kprobes).
So far only a few tests were written (by Masami Hiramatsu), but more will
be added in the near future (3.19).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUNXv0AAoJEKQekfcNnQGuCtkH/1bQgWWVZk0zphISmR01stPj
ods1P937icSXxFyrz2sVf7qht5GCisWkvSC34AWcBP88fY0KFPYAiR+4WlbCr3Y5
TEjEt/qRaBEDRtUzW5mjQMwTZ/G4KBMXOh87yrffQs8eSuIXcK55chkddtnMFZ13
H2bx27rMqFamOLbj3vyAfxUayonZsaXl7YQfRq1lu3jvZCi3zBJdjohHtXvrjKDo
dJ+ZIJtazuFV/LmsCfEtjibQNCQiVIbsxRJ/oCqUAYzKyY4gFwWbqsyH9g0Wv7HX
LAJpNgChLAau+mUQoVpc4tPU/NBCGPgVoV5ojdKJXU6WYkIkCUaIi6qBEHpG8LE=
=HFgG
-----END PGP SIGNATURE-----
Merge tag 'ftracetest-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace test code from Steven Rostedt:
"This patch series starts a new selftests section in the
tools/testing/selftest directory called "ftrace" that holds tests
aimed at testing ftrace and subsystems that use ftrace (like kprobes).
So far only a few tests were written (by Masami Hiramatsu), but more
will be added in the near future (3.19)"
* tag 'ftracetest-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/kprobes: Add selftest scripts testing kprobe-tracer as startup test
ftracetest: Add POSIX.3 standard and XFAIL result codes
ftracetest: Add kprobe basic testcases
ftracetest: Add ftrace basic testcases
ftracetest: Initial commit for ftracetest
A way to allow users to skip a manual bisect.
Allowing cherry picked patches to be tested.
The cherry pick worked for a test I needed, but stressing it may
not have all the desired effects. It doesn't cause any regressions
so I kept it in.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUNFfHAAoJEKQekfcNnQGubhQIAIIq4PMmdEwsaK31yVCjG4TX
BFrMb1JSoGaXzgAwEItqUEj4JYQ0Px8eIqsK7llff2OC7MHnOjHvb7KjxyF+z/6G
KFhraE0GSoJsX9YPno7ZYihoNTmcm7KdVgt2l+G159p83neaUEYY6/2Hj86+IbXA
y6CoIroOhiY96i7PUrMtYfPLUsUc6J5tjTNmRzs4w1SB7y0KO5uUBfJyAE8msNnM
18Z+a8B12u8KMwC6mVmJr81TgWbVIRw5lwrXXHLaL4FbIC1tkuAduW2uuN0yf0hv
11d3hY205Eskr7ms9cr903pr7P2YQcRTwMgBt7c1hwHAG6D+2s7/PATn6Jj/Hz8=
=a3Bk
-----END PGP SIGNATURE-----
Merge tag 'ktest-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest update from Steven Rostedt:
"A fix and a clean up to ktest, as well as two small features.
- A way to allow users to skip a manual bisect.
- Allowing cherry picked patches to be tested.
The cherry pick worked for a test I needed, but stressing it may not
have all the desired effects. It doesn't cause any regressions so I
kept it in"
* tag 'ktest-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Don't bother with bisect good or bad on replay
ktest: Fix check for new kernel success on rebooting to good kernel
ktest: add ability to skip during BISECT_MANUAL
ktest: Add PATCHCHECK_CHERRY
Pull powerpc updates from Michael Ellerman:
"Here's a first pull request for powerpc updates for 3.18.
The bulk of the additions are for the "cxl" driver, for IBM's Coherent
Accelerator Processor Interface (CAPI). Most of it's in drivers/misc,
which Greg & Arnd maintain, Greg said he was happy for us to take it
through our tree.
There's the usual minor cleanups and fixes, including a bit of noise
in drivers from some of those. A bunch of updates to our EEH code,
which has been getting more testing. Several nice speedups from
Anton, including 20% in clear_page().
And a bunch of updates for freescale from Scott"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (130 commits)
cxl: Fix afu_read() not doing finish_wait() on signal or non-blocking
cxl: Add documentation for userspace APIs
cxl: Add driver to Kbuild and Makefiles
cxl: Add userspace header file
cxl: Driver code for powernv PCIe based cards for userspace access
cxl: Add base builtin support
powerpc/mm: Add hooks for cxl
powerpc/opal: Add PHB to cxl mode call
powerpc/mm: Add new hash_page_mm()
powerpc/powerpc: Add new PCIe functions for allocating cxl interrupts
cxl: Add new header for call backs and structs
powerpc/powernv: Split out set MSI IRQ chip code
powerpc/mm: Export mmu_kernel_ssize and mmu_linear_psize
powerpc/msi: Improve IRQ bitmap allocator
powerpc/cell: Make spu_flush_all_slbs() generic
powerpc/cell: Move data segment faulting code out of cell platform
powerpc/cell: Move spu_handle_mm_fault() out of cell platform
powerpc/pseries: Use new defines when calling H_SET_MODE
powerpc: Update contact info in Documentation files
powerpc/perf/hv-24x7: Simplify catalog_read()
...
Add two selftest scripts which tests kprobe-tracer as the startup
selftest does.
These test cases are testing that the kprobe_event can accept a
kprobe event with $stack related arguments and a kretprobe event
with $retval argument.
Link: http://lkml.kernel.org/p/20141008040307.13415.45145.stgit@kbuild-f20.novalocal
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If git bisect reply is being used in the bisect tests, don't bother
doing the git bisect good or git bisect bad calls. The git bisect
reply will override them anyway, and that's called immediately
after the other two. Going the git bisect (good|bad) is just a
waste of time.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The reboot function when rebooting back to a good kernel has a check
to make sure that a new kernel was indeed booted. But that check
uses a timeout value, which when calling the monitor will still
return success if the timeout is hit (no bug was found). It should
return an error to let the reboot code know that a new kernel was
not reached. Only the reboot code checks the return value of the
monitor.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add XFAIL and POSIX 1003.3 standard codes (UNRESOLVED/
UNTESTED/UNSUPPORTED) as result codes. These are used for the
results that test case is expected to fail or unsupported
feature (by config).
To return these result code, this introduces exit_unresolved,
exit_untested, exit_unsupported and exit_xfail functions,
which use real-time signals to notify the result code to
ftracetest.
This also set "errexit" option for the testcases, so that
the tests don't need to exit explicitly.
Note that if the test returns UNRESOLVED/UNSUPPORTED/FAIL,
its test log including executed commands is shown on console
and main logfile as below.
------
# ./ftracetest samples/
=== Ftrace unit tests ===
[1] failure-case example [FAIL]
execute: /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/fail.tc
+ . /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/fail.tc
++ cat non-exist-file
cat: non-exist-file: No such file or directory
[2] pass-case example [PASS]
[3] unresolved-case example [UNRESOLVED]
execute: /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/unresolved.tc
+ . /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/unresolved.tc
++ trap exit_unresolved INT
++ kill -INT 29324
+++ exit_unresolved
+++ kill -s 38 29265
+++ exit 0
[4] unsupported-case example [UNSUPPORTED]
execute: /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/unsupported.tc
+ . /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/unsupported.tc
++ exit_unsupported
++ kill -s 40 29265
++ exit 0
[5] untested-case example [UNTESTED]
[6] xfail-case example [XFAIL]
# of passed: 1
# of failed: 1
# of unresolved: 1
# of untested: 1
# of unsupported: 1
# of xfailed: 1
# of undefined(test bug): 0
------
Link: http://lkml.kernel.org/p/20140929120211.30203.99510.stgit@kbuild-f20.novalocal
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a "rw_lock" torture test to stress kernel rwlocks and their irq
variant. Reader critical regions are 5x longer than writers. As such
a similar ratio of lock acquisitions is seen in the statistics. In the
case of massive contention, both hold the lock for 1/10 of a second.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
It is a rarely exercised case, so we want to have a test to ensure it
works as required.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add basic testcases for kprobe dynamic events.
This also shows that the ftracetest accepts sub-directory
for new testcases.
Link: http://lkml.kernel.org/p/20140922234254.23415.46964.stgit@kbuild-f20.novalocal
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add ftrace basic testcases. This just checks ftrace debugfs
interface works as it is designed.
Link: http://lkml.kernel.org/p/20140922234252.23415.62897.stgit@kbuild-f20.novalocal
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftracetest is a collection of testcase shell-scripts for ftrace.
To avoid regressions of ftrace, these testcases check correct
ftrace behaviors. If someone would like to add any features on
ftrace, the patch series should have at least one testcase for
checking the new behavior.
Link: http://lkml.kernel.org/p/20140922234250.23415.68758.stgit@kbuild-f20.novalocal
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When doing a manual bisect, a build can fail or a test can be inconclusive.
In these cases it would be helpful to be able to skip the test entirely.
Link: http://lkml.kernel.org/r/1409164021-2136-1-git-send-email-chris.j.arges@canonical.com
Reviewed-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Signed-off-by: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a way to run a patchcheck test on the commits that are in one branch
but not in another. This uses git cherry to find a list of commits to
test each one with.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Remove the dependence on x86 to run the memfd test. Verfied on 32-bit powerpc.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This commit changes rcutorture_runnable to torture_runnable, which is
consistent with the names of the other parameters and is a bit shorter
as well.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Although the test cases have been added, they must be specified explicitly
via the kvm.sh --configs argument in order to run them. This commit
therefore adds the RCU-tasks tests to the CFLIST so that they will be
run automatically by default.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds the TASKS01 and TASKS02 Kconfig fragments, along with
the corresponding TASKS01.boot and TASKS02.boot boot-parameter files
specifying that rcutorture test RCU-tasks instead of the default flavor.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
When starting a new torture run while an old one is still running, both
qemu processes can be outputting to the same console.out file. This can
cause quite a bit of confusion, so this commit checks for this situation,
which is normally indicated by nul bytes in the console output. Yes,
if your new run uses up an exact number of blocks of the file, this
check will be ineffective, but the odds are not bad.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
This commit specifies offstack cpumasks in TREE07 in order to catch
references to unallocated cpumask_var_t variables.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Setting CONFIG_MAXSMP=y causes cpumasks to be moved offstack, which
introduces the possibility of NULL cpumask_var_t pointers. This commit
therefore enables CONFIG_MAXSMP=y in TREE01 to increase test coverage.
However, because CONFIG_MAXSMP=y implies 8192 CPUs, we need to use
the maxcpus= boot parameter to limit the number of CPUs to something
reasonable, which in turn requires updating the scripts to handle this.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
The current set of tests covers only cases where either all possible CPUs
are nohz_full= CPUs or none of them are. Because there have been some
recent bug escapes in cases where only some of the CPUs are nohz_full=
CPUs, this commit add a configuration where only half of the CPUs are
nohz_full= CPUs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
This commit tries to get people into the correct directory before
creating the initrd directory.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
This commit sets the executable bit on test scripts config2frag.sh
and kvm.sh. Since #!/bin/bash is set in all the scripts, this commit
also drops it from all usage lines because the scripts can now all be
invoked directly.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Some of the scripts encode a default /bin/sh shell. On systems which use
dash as default shell, these scripts fail as they are bash scripts. I
encountered this while testing the sprintf() changes on a Debian system
where dash is the default shell.
This commit changes all such uses to use bash explicitly.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This test currently fails on 32-bit systems since we use u64 type to pass the
flags to fcntl.
This commit changes this to use 'unsigned int' type for flags to fcntl making it
work on 32-bit systems.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Fix the typo of ARCH when running 'make kselftests'. Change the 'X86'
to 'x86'. Test by compilation.
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shuah Khan <shuah.kh@samsung.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull namespace updates from Eric Biederman:
"This is a bunch of small changes built against 3.16-rc6. The most
significant change for users is the first patch which makes setns
drmatically faster by removing unneded rcu handling.
The next chunk of changes are so that "mount -o remount,.." will not
allow the user namespace root to drop flags on a mount set by the
system wide root. Aks this forces read-only mounts to stay read-only,
no-dev mounts to stay no-dev, no-suid mounts to stay no-suid, no-exec
mounts to stay no exec and it prevents unprivileged users from messing
with a mounts atime settings. I have included my test case as the
last patch in this series so people performing backports can verify
this change works correctly.
The next change fixes a bug in NFS that was discovered while auditing
nsproxy users for the first optimization. Today you can oops the
kernel by reading /proc/fs/nfsfs/{servers,volumes} if you are clever
with pid namespaces. I rebased and fixed the build of the
!CONFIG_NFS_FS case yesterday when a build bot caught my typo. Given
that no one to my knowledge bases anything on my tree fixing the typo
in place seems more responsible that requiring a typo-fix to be
backported as well.
The last change is a small semantic cleanup introducing
/proc/thread-self and pointing /proc/mounts and /proc/net at it. This
prevents several kinds of problemantic corner cases. It is a
user-visible change so it has a minute chance of causing regressions
so the change to /proc/mounts and /proc/net are individual one line
commits that can be trivially reverted. Unfortunately I lost and
could not find the email of the original reporter so he is not
credited. From at least one perspective this change to /proc/net is a
refgression fix to allow pthread /proc/net uses that were broken by
the introduction of the network namespace"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
proc: Point /proc/mounts at /proc/thread-self/mounts instead of /proc/self/mounts
proc: Point /proc/net at /proc/thread-self/net instead of /proc/self/net
proc: Implement /proc/thread-self to point at the directory of the current thread
proc: Have net show up under /proc/<tgid>/task/<tid>
NFS: Fix /proc/fs/nfsfs/servers and /proc/fs/nfsfs/volumes
mnt: Add tests for unprivileged remount cases that have found to be faulty
mnt: Change the default remount atime from relatime to the existing value
mnt: Correct permission checks in do_remount
mnt: Move the test for MNT_LOCK_READONLY from change_mount_flags into do_remount
mnt: Only change user settable mount flags in remount
namespaces: Use task_lock and not rcu to protect nsproxy
Setting SEAL_WRITE is not possible if there're pending GUP users. This
commit adds selftests for memfd+sealing that use FUSE to create pending
page-references. FUSE is very helpful here in that it allows us to delay
direct-IO operations for an arbitrary amount of time. This way, we can
force the kernel to pin pages and then run our normal selftests.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Ryan Lortie <desrt@desrt.ca>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some basic tests to verify sealing on memfds works as expected and
guarantees the advertised semantics.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Ryan Lortie <desrt@desrt.ca>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On IBM powerpc where multiple page size value are supported, current
ppc64 and ppc64el distro don't define the PAGE_SIZE variable in
/usr/include as this is a dynamic value retrieved by the getpagesize()
or sysconf() defined in unistd.h. The PAGE_SIZE variable sounds defined
when only one value is supported by the kernel.
As such, when the PAGE_SIZE definition doesn't exist system should
retrieve the dynamic value.
Signed-off-by: Thierry Fauck <thierry@linux.vnet.ibm.com>
Cc: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull powerpc updates from Ben Herrenschmidt:
"This is the powerpc new goodies for 3.17. The short story:
The biggest bit is Michael removing all of pre-POWER4 processor
support from the 64-bit kernel. POWER3 and rs64. This gets rid of a
ton of old cruft that has been bitrotting in a long while. It was
broken for quite a few versions already and nobody noticed. Nobody
uses those machines anymore. While at it, he cleaned up a bunch of
old dusty cabinets, getting rid of a skeletton or two.
Then, we have some base VFIO support for KVM, which allows assigning
of PCI devices to KVM guests, support for large 64-bit BARs on
"powernv" platforms, support for HMI (Hardware Management Interrupts)
on those same platforms, some sparse-vmemmap improvements (for memory
hotplug),
There is the usual batch of Freescale embedded updates (summary in the
merge commit) and fixes here or there, I think that's it for the
highlights"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (102 commits)
powerpc/eeh: Export eeh_iommu_group_to_pe()
powerpc/eeh: Add missing #ifdef CONFIG_IOMMU_API
powerpc: Reduce scariness of interrupt frames in stack traces
powerpc: start loop at section start of start in vmemmap_populated()
powerpc: implement vmemmap_free()
powerpc: implement vmemmap_remove_mapping() for BOOK3S
powerpc: implement vmemmap_list_free()
powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTE
powerpc/book3s: Fix endianess issue for HMI handling on napping cpus.
powerpc/book3s: handle HMIs for cpus in nap mode.
powerpc/powernv: Invoke opal call to handle hmi.
powerpc/book3s: Add basic infrastructure to handle HMI in Linux.
powerpc/iommu: Fix comments with it_page_shift
powerpc/powernv: Handle compound PE in config accessors
powerpc/powernv: Handle compound PE for EEH
powerpc/powernv: Handle compound PE
powerpc/powernv: Split ioda_eeh_get_state()
powerpc/powernv: Allow to freeze PE
powerpc/powernv: Enable M64 aperatus for PHB3
powerpc/eeh: Aux PE data for error log
...
Here's the big driver-core pull request for 3.17-rc1.
Largest thing in here is the dma-buf rework and fence code, that touched
many different subsystems so it was agreed it should go through this
tree to handle merge issues. There's also some firmware loading
updates, as well as tests added, and a few other tiny changes, the
changelog has the details.
All have been in linux-next for a long time.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlPf1XcACgkQMUfUDdst+ylREACdHLXBa02yLrRzbrONJ+nARuFv
JuQAoMN49PD8K9iMQpXqKBvZBsu+iCIY
=w8OJ
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here's the big driver-core pull request for 3.17-rc1.
Largest thing in here is the dma-buf rework and fence code, that
touched many different subsystems so it was agreed it should go
through this tree to handle merge issues. There's also some firmware
loading updates, as well as tests added, and a few other tiny changes,
the changelog has the details.
All have been in linux-next for a long time"
* tag 'driver-core-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits)
ARM: imx: Remove references to platform_bus in mxc code
firmware loader: Fix _request_firmware_load() return val for fw load abort
platform: Remove most references to platform_bus device
test: add firmware_class loader test
doc: fix minor typos in firmware_class README
staging: android: Cleanup style issues
Documentation: devres: Sort managed interfaces
Documentation: devres: Add devm_kmalloc() et al
fs: debugfs: remove trailing whitespace
kernfs: kernel-doc warning fix
debugfs: Fix corrupted loop in debugfs_remove_recursive
stable_kernel_rules: Add pointer to netdev-FAQ for network patches
driver core: platform: add device binding path 'driver_override'
driver core/platform: remove unused implicit padding in platform_object
firmware loader: inform direct failure when udev loader is disabled
firmware: replace ALIGN(PAGE_SIZE) by PAGE_ALIGN
firmware: read firmware size using i_size_read()
firmware loader: allow disabling of udev as firmware loader
reservation: add suppport for read-only access using rcu
reservation: update api and add some helpers
...
Conflicts:
drivers/base/platform.c
Here's the big driver misc / char pull request for 3.17-rc1.
Lots of things in here, the thunderbolt support for Apple laptops, some
other new drivers, testing fixes, and other good things. All have been
in linux-next for a long time.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlPf1LcACgkQMUfUDdst+ymaVwCgqMrKFmpduBufOSFROhxlfB5Q
ajsAoNDmIn3pgla+kj23Y5ib20aMi++s
=IdIr
-----END PGP SIGNATURE-----
Merge tag 'char-misc-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver patches from Greg KH:
"Here's the big driver misc / char pull request for 3.17-rc1.
Lots of things in here, the thunderbolt support for Apple laptops,
some other new drivers, testing fixes, and other good things. All
have been in linux-next for a long time"
* tag 'char-misc-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (119 commits)
misc: bh1780: Introduce the use of devm_kzalloc
Lattice ECP3 FPGA: Correct endianness
drivers/misc/ti-st: Load firmware from ti-connectivity directory.
dt-bindings: extcon: Add support for SM5502 MUIC device
extcon: sm5502: Change internal hardware switch according to cable type
extcon: sm5502: Detect cable state after completing platform booting
extcon: sm5502: Add support new SM5502 extcon device driver
extcon: arizona: Get MICVDD against extcon device
extcon: Remove unnecessary OOM messages
misc: vexpress: Fix sparse non static symbol warnings
mei: drop unused hw dependent fw status functions
misc: bh1770glc: Use managed functions
pcmcia: remove DEFINE_PCI_DEVICE_TABLE usage
misc: remove DEFINE_PCI_DEVICE_TABLE usage
ipack: Replace DEFINE_PCI_DEVICE_TABLE macro use
drivers/char/dsp56k.c: drop check for negativity of unsigned parameter
mei: fix return value on disconnect timeout
mei: don't schedule suspend in pm idle
mei: start disconnect request timer consistently
mei: reset client connection state on timeout
...
Pull RCU changes from Ingo Molar:
"The main changes:
- torture-test updates
- callback-offloading changes
- maintainership changes
- update RCU documentation
- miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
rcu: Allow for NULL tick_nohz_full_mask when nohz_full= missing
rcu: Fix a sparse warning in rcu_report_unblock_qs_rnp()
rcu: Fix a sparse warning in rcu_initiate_boost()
rcu: Fix __rcu_reclaim() to use true/false for bool
rcu: Remove CONFIG_PROVE_RCU_DELAY
rcu: Use __this_cpu_read() instead of per_cpu_ptr()
rcu: Don't use NMIs to dump other CPUs' stacks
rcu: Bind grace-period kthreads to non-NO_HZ_FULL CPUs
rcu: Simplify priority boosting by putting rt_mutex in rcu_node
rcu: Check both root and current rcu_node when setting up future grace period
rcu: Allow post-unlock reference for rt_mutex
rcu: Loosen __call_rcu()'s rcu_head alignment constraint
rcu: Eliminate read-modify-write ACCESS_ONCE() calls
rcu: Remove redundant ACCESS_ONCE() from tick_do_timer_cpu
rcu: Make rcu node arrays static const char * const
signal: Explain local_irq_save() call
rcu: Handle obsolete references to TINY_PREEMPT_RCU
rcu: Document deadlock-avoidance information for rcu_read_unlock()
scripts: Teach get_maintainer.pl about the new "R:" tag
rcu: Update rcu torture maintainership filename patterns
...
worked properly as it assumed the bad config was a subset of the good
config, and just found the config that would break the build.
The new way does a diff of the bad config verses the good config and makes
the similar until it finds that one config works and the other does not
and reports the config that makes that difference. The two configs do
not need to be related. It is much more useful now.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJT35bBAAoJEKQekfcNnQGulc4H/RXCeEXlJFQZ93Q5a5beLxYY
AaZTKpUUDTz/747AVRgsfI1s1wauLFTTO+hYtJ47s5qFeKa7ISj9UlBPtJVdFMTq
xMg3y31OPj9R437S9o5PCDcdzUcQTGmHst1+7mwHkZLV3dS4E4xxC46rZXs4w7RE
Ko1Qg43HIn4sPXKGNMIaSBrLLY4xeJCgKXFRUiBlH54w0JrQO3ZrsvldpzhunM4b
Gt+mEzgxkJgAWYxFjkn4iD+b1Xsxv12YZuFrl/BwE9/D4Kr5CCeu8Tdpkc4W1F29
keXomcy6+1deK3nvFaPH9JG0lGYsgqcrPfE0ESkG0DIflNhY7rnzmh/HJMKg6CM=
=QDWs
-----END PGP SIGNATURE-----
Merge tag 'ktest-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull config-bisect changes from Steven Rostedt:
"The big change here is the rewrite of config-bisect. The old way
never worked properly as it assumed the bad config was a subset of the
good config, and just found the config that would break the build.
The new way does a diff of the bad config verses the good config and
makes the similar until it finds that one config works and the other
does not and reports the config that makes that difference. The two
configs do not need to be related. It is much more useful now:
* tag 'ktest-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Update documentation on config_bisect
ktest: Add the config bisect manual back
ktest: Remove unused functions
ktest: Put back in the CONFIG_BISECT_CHECK
ktest: Rewrite the config-bisect to actually work
ktest: Some cleanup for improving readability
ktest: add 2nd parameter of run_command() to set the redirect target file
Kenton Varda <kenton@sandstorm.io> discovered that by remounting a
read-only bind mount read-only in a user namespace the
MNT_LOCK_READONLY bit would be cleared, allowing an unprivileged user
to the remount a read-only mount read-write.
Upon review of the code in remount it was discovered that the code allowed
nosuid, noexec, and nodev to be cleared. It was also discovered that
the code was allowing the per mount atime flags to be changed.
The first naive patch to fix these issues contained the flaw that using
default atime settings when remounting a filesystem could be disallowed.
To avoid this problems in the future add tests to ensure unprivileged
remounts are succeeding and failing at the appropriate times.
Cc: stable@vger.kernel.org
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Although we expect some small discrepancies for very large counts, we
seem to be able to count up to 64 billion instructions without too much
skew, so do so.
Also switch to using decimals for the instruction counts. This just
makes it easier to visually compare the expected vs actual values, as
well as the raw result from instructions.
Before:
instructions: result 68719476753 running/enabled 13101961654
cycles: result 38077343785 running/enabled 13101725752
Looped for 68719476736 instructions, overhead 17
Expected 68719476753
Actual 68719476753
Delta 0, 0.000000%
success: count_instructions
After:
instructions: result 64000000016 running/enabled 12197599964
cycles: result 35412471674 running/enabled 12197534110
Looped for 64000000000 instructions, overhead 16
Expected 64000000016
Actual 64000000016
Delta 0, 0.000000%
success: count_instructions
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Have a task eat some cpu while we are counting instructions to create
some scheduler pressure. The idea being to try and unearth any bugs we
have in counting that only appear when context switching is happening.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
There is at least one bug in core_busy_loop(), we use r0, but it's
not in the clobber list. We were getting away with this it seems but
that was luck.
It's also fishy to be touching the stack, even if we do it below the
stack pointer. It seems we get away with it, but looking at the
generated code that may just be luck.
So move it into assembler, do all the stack handling by hand. We create
a stack frame to save the non-volatiles in, so we can muck around with
them.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
start and end should be unsigned long.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Currently we ignore errors from our sub Makefiles. We inherited that
from the top-level selftests Makefile which aims to build and run as
many tests as possible and damn the torpedoes.
For the powerpc tests we'd instead like any errors to fail the build, so
we can automatically catch build failures.
We can achieve the best of both worlds by using -k, which tells make to
keep building when it hits an error, but still reports the error.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This provides a simple interface to trigger the firmware_class loader
to test built-in, filesystem, and user helper modes. Additionally adds
tests via the new interface to the selftests tree.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This resolves a number of merge issues with changes in this tree and
Linus's tree at the same time.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some systems, hot-plug tests could hang forever waiting for cpu and
memory to be ready to be offlined. A special hot-plug target is created
to run full range of hot-plug tests. In default mode, hot-plug tests run
in safe mode with a limited scope. In limited mode, cpu-hotplug test is
run on a single cpu as opposed to all hotplug capable cpus, and memory
hotplug test is run on 2% of hotplug capable memory instead of 10%. In
addition to the above change, cpu-hotplug is chnged to change processor
affinity to cpu 0 so it doesn't impact itself while the test runs.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kcmp_test.c: In function ‘main’:
kcmp_test.c:85:5: warning: format ‘%li’ expects argument of type ‘long int’, but argument 2 has type ‘int’ [-Wformat=]
ret, strerror(errno));
^
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Makefile compile linking order is incorrect causing the compile
to fail not finding librt symbols.
/tmp/cceTqwFh.o: In function `test_queue_fail':
mq_open_tests.c:(.text+0x6b): undefined reference to `mq_open'
mq_open_tests.c:(.text+0x80): undefined reference to `mq_getattr'
mq_open_tests.c:(.text+0xa2): undefined reference to `mq_close'
mq_open_tests.c:(.text+0xcf): undefined reference to `mq_unlink'
/tmp/cceTqwFh.o: In function `test_queue.constprop.6':
mq_open_tests.c:(.text+0x15a): undefined reference to `mq_open'
mq_open_tests.c:(.text+0x16f): undefined reference to `mq_getattr'
mq_open_tests.c:(.text+0x195): undefined reference to `mq_close'
mq_open_tests.c:(.text+0x1c2): undefined reference to `mq_unlink'
/tmp/cceTqwFh.o: In function `shutdown.part.0':
mq_open_tests.c:(.text.unlikely+0x5b): undefined reference to `mq_close'
mq_open_tests.c:(.text.unlikely+0x7a): undefined reference to `mq_unlink'
collect2: error: ld returned 1 exit status
make: *** [all] Error 1
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix several compile warnings - these are repeats like the ones
below:
gcc -O2 -lrt mq_open_tests.c -o mq_open_tests
mq_open_tests.c: In function ‘main’:
mq_open_tests.c:295:2: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘rlim_t’ [-Wformat=]
printf("\tRLIMIT_MSGQUEUE(soft):\t\t%d\n", saved_limits.rlim_cur);
^
mq_open_tests.c: In function ‘shutdown’:
mq_open_tests.c:83:9: warning: ignoring return value of ‘seteuid’, declared with attribute warn_unused_result [-Wunused-result]
seteuid(0);
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix numerous compile warnings in mq_perf_tests.c. All of these
are wrong format in printfs when printing nvsec.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
on-off-test is a bash script and invoked from /bin/sh
This results in the following error:
./on-off-test.sh: 9: [: !=: unexpected operator
Changed Makefile to use bash instead.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
on-off-test is a bash script and invoked from /bin/sh
This results in the following error:
./on-off-test.sh: 9: [: !=: unexpected operator
Changed Makefile to use bash instead.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The CONFIG_PROVE_RCU_DELAY Kconfig parameter doesn't appear to be very
effective at finding race conditions, so this commit removes it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
[ paulmck: Remove definition and uses as noted by Paul Bolle. ]
The test fails in the middle when it is not run as root while accessing
/proc/sys/kernel/msg_next_id. Changed it to check for root at the
beginning of the test and exit if not root.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
on-off-test uses "$UID != 0" to test for root, but $UID is a construct
specific to bash. Using /bin/sh that isn't bash results in the
following error (due to the "$UID" part expanding to nothing):
./on-off-test.sh: 9: [: !=: unexpected operator
Change Makefile to use bash instead.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
on-off-test uses "$UID != 0" to test for root, but $UID is a construct
specific to bash. Using /bin/sh that isn't bash results in the
following error (due to the "$UID" part expanding to nothing):
./on-off-test.sh: 9: [: !=: unexpected operator
Change Makefile to use bash instead.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently the post-processing complains about the lack of rcutorture
output when --buildonly is set and also emits misleading messages about
kernels being started and finishing. This commit suppresses these
complaints and messages.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The CFcommon file must now be present, which makes using the current
scripts against old kernel versions cumbersome. This commit therefore
makes the CFcommon file be optional, so that old kernel versions can be
used with current torture scripts.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This gives us standardised success/failure output and also handles
killing the test if it runs forever (2 minutes).
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Pull more powerpc updates from Ben Herrenschmidt:
"Here are the remaining bits I was mentioning earlier. Mostly bug
fixes and new selftests from Michael (yay !). He also removed the WSP
platform and A2 core support which were dead before release, so less
clutter.
One little "feature" I snuck in is the doorbell IPI support for
non-virtualized P8 which speeds up IPIs significantly between threads
of a core"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (34 commits)
powerpc/book3s: Fix some ABIv2 issues in machine check code
powerpc/book3s: Fix guest MC delivery mechanism to avoid soft lockups in guest.
powerpc/book3s: Increment the mce counter during machine_check_early call.
powerpc/book3s: Add stack overflow check in machine check handler.
powerpc/book3s: Fix machine check handling for unhandled errors
powerpc/eeh: Dump PE location code
powerpc/powernv: Enable POWER8 doorbell IPIs
powerpc/cpuidle: Only clear LPCR decrementer wakeup bit on fast sleep entry
powerpc/powernv: Fix killed EEH event
powerpc: fix typo 'CONFIG_PMAC'
powerpc: fix typo 'CONFIG_PPC_CPU'
powerpc/powernv: Don't escalate non-existing frozen PE
powerpc/eeh: Report frozen parent PE prior to child PE
powerpc/eeh: Clear frozen state for child PE
powerpc/powernv: Reduce panic timeout from 180s to 10s
powerpc/xmon: avoid format string leaking to printk
selftests/powerpc: Add tests of PMU EBBs
selftests/powerpc: Add support for skipping tests
selftests/powerpc: Put the test in a separate process group
selftests/powerpc: Fix instruction loop for ABIv2 (LE)
...
Pull networking updates from David Miller:
1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov.
2) Multiqueue support in xen-netback and xen-netfront, from Andrew J
Benniston.
3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn
Mork.
4) BPF now has a "random" opcode, from Chema Gonzalez.
5) Add more BPF documentation and improve test framework, from Daniel
Borkmann.
6) Support TCP fastopen over ipv6, from Daniel Lee.
7) Add software TSO helper functions and use them to support software
TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia.
8) Support software TSO in fec driver too, from Nimrod Andy.
9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli.
10) Handle broadcasts more gracefully over macvlan when there are large
numbers of interfaces configured, from Herbert Xu.
11) Allow more control over fwmark used for non-socket based responses,
from Lorenzo Colitti.
12) Do TCP congestion window limiting based upon measurements, from Neal
Cardwell.
13) Support busy polling in SCTP, from Neal Horman.
14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru.
15) Bridge promisc mode handling improvements from Vlad Yasevich.
16) Don't use inetpeer entries to implement ID generation any more, it
performs poorly, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits)
rtnetlink: fix userspace API breakage for iproute2 < v3.9.0
tcp: fixing TLP's FIN recovery
net: fec: Add software TSO support
net: fec: Add Scatter/gather support
net: fec: Increase buffer descriptor entry number
net: fec: Factorize feature setting
net: fec: Enable IP header hardware checksum
net: fec: Factorize the .xmit transmit function
bridge: fix compile error when compiling without IPv6 support
bridge: fix smatch warning / potential null pointer dereference
via-rhine: fix full-duplex with autoneg disable
bnx2x: Enlarge the dorq threshold for VFs
bnx2x: Check for UNDI in uncommon branch
bnx2x: Fix 1G-baseT link
bnx2x: Fix link for KR with swapped polarity lane
sctp: Fix sk_ack_backlog wrap-around problem
net/core: Add VF link state control policy
net/fsl: xgmac_mdio is dependent on OF_MDIO
net/fsl: Make xgmac_mdio read error message useful
net_sched: drr: warn when qdisc is not work conserving
...
The Power8 Performance Monitor Unit (PMU) has a new feature called Event
Based Branches (EBB). This commit adds tests of the kernel API for using
EBBs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Allows us to kill the test and any children it has spawned.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Correct the DSCR SPR becoming temporarily corrupted if a task is
context switched during a transaction.
The problem occurs while suspending the task and is caused by saving
the DSCR to thread.dscr after it has already been set to the CPU's
default value:
__switch_to() calls __switch_to_tm()
which calls tm_reclaim_task()
which calls tm_reclaim_thread()
which calls tm_reclaim()
where the DSCR is set to the CPU's default
__switch_to() calls _switch()
where thread.dscr is set to the DSCR
When the task is resumed, it's transaction will be doomed (as usual)
and the DSCR SPR will be corrupted, although the checkpointed value
will be correct. Therefore the DSCR will be immediately corrected by
the transaction aborting, unless it has been suspended. In that case
the incorrect value can be seen by the task until it resumes the
transaction.
The fix is to treat the DSCR similarly to the TAR and save it early
in __switch_to().
A program exposing the problem is added to the kernel self tests as:
tools/testing/selftests/powerpc/tm/tm-resched-dscr.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
CC: <stable@vger.kernel.org> [v3.10+]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Pull powerpc updates from Ben Herrenschmidt:
"Here is the bulk of the powerpc changes for this merge window. It got
a bit delayed in part because I wasn't paying attention, and in part
because I discovered I had a core PCI change without a PCI maintainer
ack in it. Bjorn eventually agreed it was ok to merge it though we'll
probably improve it later and I didn't want to rebase to add his ack.
There is going to be a bit more next week, essentially fixes that I
still want to sort through and test.
The biggest item this time is the support to build the ppc64 LE kernel
with our new v2 ABI. We previously supported v2 userspace but the
kernel itself was a tougher nut to crack. This is now sorted mostly
thanks to Anton and Rusty.
We also have a fairly big series from Cedric that add support for
64-bit LE zImage boot wrapper. This was made harder by the fact that
traditionally our zImage wrapper was always 32-bit, but our new LE
toolchains don't really support 32-bit anymore (it's somewhat there
but not really "supported") so we didn't want to rely on it. This
meant more churn that just endian fixes.
This brings some more LE bits as well, such as the ability to run in
LE mode without a hypervisor (ie. under OPAL firmware) by doing the
right OPAL call to reinitialize the CPU to take HV interrupts in the
right mode and the usual pile of endian fixes.
There's another series from Gavin adding EEH improvements (one day we
*will* have a release with less than 20 EEH patches, I promise!).
Another highlight is the support for the "Split core" functionality on
P8 by Michael. This allows a P8 core to be split into "sub cores" of
4 threads which allows the subcores to run different guests under KVM
(the HW still doesn't support a partition per thread).
And then the usual misc bits and fixes ..."
[ Further delayed by gmail deciding that BenH is a dirty spammer.
Google knows. ]
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (155 commits)
powerpc/powernv: Add missing include to LPC code
selftests/powerpc: Test the THP bug we fixed in the previous commit
powerpc/mm: Check paca psize is up to date for huge mappings
powerpc/powernv: Pass buffer size to OPAL validate flash call
powerpc/pseries: hcall functions are exported to modules, need _GLOBAL_TOC()
powerpc: Exported functions __clear_user and copy_page use r2 so need _GLOBAL_TOC()
powerpc/powernv: Set memory_block_size_bytes to 256MB
powerpc: Allow ppc_md platform hook to override memory_block_size_bytes
powerpc/powernv: Fix endian issues in memory error handling code
powerpc/eeh: Skip eeh sysfs when eeh is disabled
powerpc: 64bit sendfile is capped at 2GB
powerpc/powernv: Provide debugfs access to the LPC bus via OPAL
powerpc/serial: Use saner flags when creating legacy ports
powerpc: Add cpu family documentation
powerpc/xmon: Fix up xmon format strings
powerpc/powernv: Add calls to support little endian host
powerpc: Document sysfs DSCR interface
powerpc: Fix regression of per-CPU DSCR setting
powerpc: Split __SYSFS_SPRSETUP macro
arch: powerpc/fadump: Cleaning up inconsistent NULL checks
...
This adds several behavioral tests to sysctl string and number writing
to detect unexpected cases that behaved differently when the sysctl
kernel.sysctl_writes_strict != 1.
[ original ]
root@localhost:~# make test_num
== Testing sysctl behavior against /proc/sys/kernel/domainname ==
Writing test file ... ok
Checking sysctl is not set to test value ... ok
Writing sysctl from shell ... ok
Resetting sysctl to original value ... ok
Writing entire sysctl in single write ... ok
Writing middle of sysctl after synchronized seek ... FAIL
Writing beyond end of sysctl ... FAIL
Writing sysctl with multiple long writes ... FAIL
Writing entire sysctl in short writes ... FAIL
Writing middle of sysctl after unsynchronized seek ... ok
Checking sysctl maxlen is at least 65 ... ok
Checking sysctl keeps original string on overflow append ... FAIL
Checking sysctl stays NULL terminated on write ... ok
Checking sysctl stays NULL terminated on overwrite ... ok
make: *** [test_num] Error 1
root@localhost:~# make test_string
== Testing sysctl behavior against /proc/sys/vm/swappiness ==
Writing test file ... ok
Checking sysctl is not set to test value ... ok
Writing sysctl from shell ... ok
Resetting sysctl to original value ... ok
Writing entire sysctl in single write ... ok
Writing middle of sysctl after synchronized seek ... FAIL
Writing beyond end of sysctl ... FAIL
Writing sysctl with multiple long writes ... ok
make: *** [test_string] Error 1
[ with CONFIG_PROC_SYSCTL_STRICT_WRITES ]
root@localhost:~# make run_tests
== Testing sysctl behavior against /proc/sys/kernel/domainname ==
Writing test file ... ok
Checking sysctl is not set to test value ... ok
Writing sysctl from shell ... ok
Resetting sysctl to original value ... ok
Writing entire sysctl in single write ... ok
Writing middle of sysctl after synchronized seek ... ok
Writing beyond end of sysctl ... ok
Writing sysctl with multiple long writes ... ok
Writing entire sysctl in short writes ... ok
Writing middle of sysctl after unsynchronized seek ... ok
Checking sysctl maxlen is at least 65 ... ok
Checking sysctl keeps original string on overflow append ... ok
Checking sysctl stays NULL terminated on write ... ok
Checking sysctl stays NULL terminated on overwrite ... ok
== Testing sysctl behavior against /proc/sys/vm/swappiness ==
Writing test file ... ok
Checking sysctl is not set to test value ... ok
Writing sysctl from shell ... ok
Resetting sysctl to original value ... ok
Writing entire sysctl in single write ... ok
Writing middle of sysctl after synchronized seek ... ok
Writing beyond end of sysctl ... ok
Writing sysctl with multiple long writes ... ok
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current scripting only keeps track of the git SHA-1 of the current
HEAD. This can cause confusion in cases where testing ran in a git
tree where changes had not yet been checked in. This commit therefore
also records the output of "git diff HEAD" to provide the information
needed to reconstruct the source tree that was tested.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit ensures that RCU-sched primitives are tested in
TREE_PREEMPT_RCU kernels, a combination that was previously omitted.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The kvm-test-1-run.sh currently counts "sleep 1" commands to detect
hangs. This can fail spectacularly on busy systems, where "sleep 1"
might take far longer than one second to complete. This commit
therefore changes hang detection to use elapsed time measurements.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
