Commit graph

26120 commits

Author SHA1 Message Date
Joe Perches
726b65ad44 tulip: Convert uses of KERN_DEBUG
Convert logging messages to more current styles.

Added -DDEBUG to Makefile to maintain current message logging.
This could be converted to a specific CONFIG_TULIP_DEBUG option.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09 12:51:15 -07:00
Joe Perches
163ef0b592 tulip: Convert printks to netdev_<level>
Use the current more descriptive logging styles.

Add pr_fmt and remove PFX where appropriate.
Use netif_<level>, netdev_<level>
Indent a few blocks in xircom_cb where appropriate.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09 12:51:15 -07:00
Joe Perches
54668b84bd tulip: xircom_cb: Convert #ifdef DEBUG blocks and enter/leave uses
Change the blocks that are guarded by #if DEBUG to
be #if defined DEBUG && DEBUG > 1 so that pr_debug
can be used later.

Remove enter/leave macros and uses.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09 12:51:14 -07:00
David S. Miller
4a9e25d8de Merge branch 'davem-next.r8169' of git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6 2011-05-09 12:48:05 -07:00
Alexey Dobriyan
4940fc889e net: add mac_pton() for parsing MAC address
mac_pton() parses MAC address in form XX:XX:XX:XX:XX:XX and only in that form.

mac_pton() doesn't dirty result until it's sure string representation is valid.

mac_pton() doesn't care about characters _after_ last octet,
it's up to caller to deal with it.

mac_pton() diverges from 0/-E return value convention.
Target usage:

	if (!mac_pton(str, whatever->mac))
		return -EINVAL;
	/* ->mac being u8 [ETH_ALEN] is filled at this point. */
	/* optionally check str[3 * ETH_ALEN - 1] for termination */

Use mac_pton() in pktgen and netconsole for start.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09 12:10:49 -07:00
Alexey Dobriyan
99f823f98f netconsole: switch to kstrto*() functions
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09 12:10:48 -07:00
Michał Mirosław
0693e88e6c net: bonding: factor out rlock(bond->lock) in xmit path
Pull read_lock(&bond->lock) and BOND_IS_OK() to bond_start_xmit() from
mode-dependent xmit functions.

netif_running() is always true in hard_start_xmit.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09 12:05:59 -07:00
Francois Romieu
5d320a205d r8169: avoid late chip identifier initialisation.
Unknown 8168 chips did not have any PLL power method set as they
did not inherit a default family soon enough. Fix it.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
2011-05-09 21:03:12 +02:00
Francois Romieu
85bffe6ca2 r8169: merge firmware information into the chipset description data.
- RTL_GIGA_MAC_NONE is a fake index so put it at the end of the
  enumeration and shift everybody.
- RTL_GIGA_MAC_VER_17 / RTL_GIGA_MAC_VER_16 ordering fixed. Though
  not wrong it was confusing enough to wonder if things were right.

Renaming rtl_chip_info was not strictly necessary. It allows to
check the patch for the correct use of the indexes though.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
2011-05-09 21:03:10 +02:00
Francois Romieu
31bd204f97 r8169: provide some firmware information via ethtool.
There is no real firmware version yet but the manpage of ethtool
is rather terse about the driver information.

Former output:
$ ethtool -i eth1
driver: r8169
version: 2.3LK-NAPI
firmware-version:
bus-info: 0000:01:00.0
$ ethtool -i eth0
driver: r8169
version: 2.3LK-NAPI
firmware-version:
bus-info: 0000:03:00.0

Current output:
$ ethtool -i eth1
driver: r8169
version: 2.3LK-NAPI
firmware-version: N/A
bus-info: 0000:01:00.0

$ ethtool -i eth0
driver: r8169
version: 2.3LK-NAPI
firmware-version: rtl_nic/rtl8168d-1.fw
bus-info: 0000:03:00.0

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Fixed-by Ciprian Docan <docan@eden.rutgers.edu>
Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
Cc: Fejes József <fejes@joco.name>
Cc: Borislav Petkov <borislav.petkov@amd.com>
2011-05-09 21:03:08 +02:00
Francois Romieu
56de414c0c r8169: remove non-NAPI context invocation of rtl8169_rx_interrupt.
Invocation of rtl8169_rx_interrupt from rtl8169_reset_task was originally
intended to retrieve as much packets as possible from the rx ring when a
reset was needed. Nowadays rtl8169_reset_task is only scheduled, with
some delay
a. from the tx timeout watchdog
b. when resuming
c. from rtl8169_rx_interrupt itself

It's dubious that the loss of outdated packets will matter much for a)
and b). c) does not need to call itself again.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
2011-05-09 21:03:06 +02:00
Francois Romieu
4876cc1e49 r8169: link speed selection timer rework.
The implementation was a bit krusty.

The 10s rtl8169_phy_timer timer has been (was ?) required with older
8169 for adequate phy operation when full gigabit is advertised in
autonegotiated mode. The timer does nothing if the link is up.
Otherwise it keeps resetting the phy until things improve.

- the device private data field phy_1000_ctrl_reg was used to
  schedule the timer. Avoid it and save a few bytes.

- rtl8169_set_settings
  pending timer is disabled before changing the link settings as
  rtl8169_phy_timer is not always needed (see the removed test in
  rtl8169_phy_timer).

- rtl8169_set_speed
  the requested link parameters may not match the chipset : bail out
  early on failure.

- rtl8169_open
  Calling rtl8169_request_timer is redundant with
  -> rtl8169_open
     -> rtl8169_init_phy
        -> rtl8169_set_speed
           -> mod_timer
  The latter always enables the phy timer whereas the former did not
  for RTL_GIGA_MAC_VER_01. It should not make things worse but only
  time will tell if reality agrees.

- rtl8169_request_timer : unused yet. Removed.

- rtl8169_delete_timer : useless. Bloat. Removed.

Side effect : the timer may kick in if the TBI is enabled. I do not
know if the TBI has ever been used in real life.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
2011-05-09 21:03:03 +02:00
Francois Romieu
826e6cbdad r8169: rtl8169_set_speed_xmii cleanup.
Shorten chipset version test.

No functional change.

Careful readers will notice that the 'supports_gmii' flag is deduced
from the device PCI id. Though less specific than the chipset related
RTL_GIGA_MAC_VER_XY, it is good enough to detect a GMII deprieved 810x.
Some features push for a device specific configuration (improved jumbo
frame support for instance). 'supports_gmii' will follow this path
if / when the device PCI id test stops working.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
2011-05-09 21:03:01 +02:00
Francois Romieu
6f43adc88f r8169: remove some code duplication.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
2011-05-09 21:02:58 +02:00
Francois Romieu
cecb5fd7c2 r8169: style cleanups.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
2011-05-09 21:02:55 +02:00
Eric Dumazet
226bd34114 net: use batched device unregister in veth and macvlan
veth devices dont use the batched device unregisters yet.

Since veth are a pair of devices, it makes sense to use a batch of two
unregisters, this roughly divides dismantle time by two.

Fix this by changing dellink() callers to always provide a non NULL
head. (Idea from Michał Mirosław)

This patch also handles macvlan case : We now dismantle all macvlans on
top of a lower dev at once.

Reported-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Michał Mirosław <mirqus@gmail.com>
Cc: Jesse Gross <jesse@nicira.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ben Greear <greearb@candelatech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09 11:41:40 -07:00
Mahesh Bandewar
eed2a12f1e net: Allow ethtool to set interface in loopback mode.
This patch enables ethtool to set the loopback mode on a given interface.
By configuring the interface in loopback mode in conjunction with a policy
route / rule, a userland application can stress the egress / ingress path
exposing the flows of the change in progress and potentially help developer(s)
understand the impact of those changes without even sending a packet out
on the network.

Following set of commands illustrates one such example -
    a) ip -4 addr add 192.168.1.1/24 dev eth1
    b) ip -4 rule add from all iif eth1 lookup 250
    c) ip -4 route add local 0/0 dev lo proto kernel scope host table 250
    d) arp -Ds 192.168.1.100 eth1
    e) arp -Ds 192.168.1.200 eth1
    f) sysctl -w net.ipv4.ip_nonlocal_bind=1
    g) sysctl -w net.ipv4.conf.all.accept_local=1
    # Assuming that the machine has 8 cores
    h) taskset 000f netserver -L 192.168.1.200
    i) taskset 00f0 netperf -t TCP_CRR -L 192.168.1.100 -H 192.168.1.200 -l 30

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08 15:59:12 -07:00
David S. Miller
534eacb5d4 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-next-2.6 2011-05-07 22:57:22 -07:00
David S. Miller
0f020dec54 hamachi: Put back RX_CHECKSUM
I deleted it by mistake in the TX_CHECKSUM removal
commit.

Reported-by: Michał Mirosław <mirqus@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 22:31:35 -07:00
Emil Tantilov
58f6bcf96e ixgbe: add ethtool counters for OS2BMC
OS2BMC registers are available for X540.
This patch adds ethtool counters based on those registers.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-07 03:15:45 -07:00
Emil Tantilov
67a74ee2a2 ixgbe: add rxhash support
feed RSS hash into skb->rxhash

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-07 03:14:22 -07:00
Jeff Kirsher
936db3559f igb: convert to ethtool set_phys_id
Based on patch from Stephen Hemminger.
Convert igb driver to use new set_phys_id ethtool interface.

CC: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-07 03:11:57 -07:00
Jeff Kirsher
6435909199 e1000: convert to set_phys_id
Based on the original patch from Stephen Hemminger.
Convert to new LED control infrastucture and remove no longer
necessary bits.

CC: Stephen Hemminger <shemminger@vyatta.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-07 03:10:13 -07:00
Jeff Kirsher
a70b86ae20 e100: implemenet set_phys_id
Based on the original patch from Stephen Hemminger.
Implement set_phys_id to control LED.

CC: Stephen Hemminger <shemminger@vyatta.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-07 03:08:38 -07:00
David S. Miller
ad638bd16d hamachi: Delete TX checksumming code commented out since 1999
TX checksumming support has been ifdef commented out of this driver
for more than 10 years, and it makes references to aspects of the IPv4
stack from back then as well.

If someone has one of these rare cards and wants to properly resurrect
TX checksumming support, they can still get at this code in the
version control history.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-06 11:58:55 -07:00
David S. Miller
7143b7d412 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/tg3.c
2011-05-05 14:59:02 -07:00
David S. Miller
90864fbc76 Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 2011-05-05 14:09:28 -07:00
Kurt Van Dijck
87e9af6cc6 can: fix SJA1000 dlc for RTR packets
RTR frames do have a valid data length code on CAN.
The driver for SJA1000 did not handle that situation properly.

Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05 11:02:22 -07:00
Jiri Pirko
1c5cae815d net: call dev_alloc_name from register_netdevice
Force dev_alloc_name() to be called from register_netdevice() by
dev_get_valid_name(). That allows to remove multiple explicit
dev_alloc_name() calls.

The possibility to call dev_alloc_name in advance remains.

This also fixes veth creation regresion caused by
84c49d8c3e

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05 10:57:45 -07:00
Dmitry Kravkov
e892067497 bnx2x: function descriptions format fixed
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05 10:44:36 -07:00
Dmitry Kravkov
5de924086a bnx2x: update year to 2011 and version to 1.62.12-0
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05 10:44:35 -07:00
Dmitry Kravkov
b3b83c3f3c bnx2x: improve memory handling, low memory recovery flows
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05 10:44:34 -07:00
Dmitry Kravkov
426b924150 bnx2x: Do storage mac address validation for SF mode.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05 10:44:34 -07:00
Dmitry Kravkov
f9a3ebbe65 bnx2x: allow WoL on every function in MF modes
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05 10:44:33 -07:00
Vladislav Zolotarov
2ae17f6660 bnx2x: link report improvements
To avoid link notification duplication

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05 10:44:33 -07:00
Giuseppe CAVALLARO
34da9e50e9 stmmac: removed not used definitions
Reported-by: Karim Hamiti <karim.hamiti@st.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05 10:43:03 -07:00
Ming Lei
75bd0cbdc2 usbnet: runtime pm: fix out of memory
This patch makes use of the EVENT_DEV_OPEN flag introduced recently to
fix one out of memory issue, which can be reproduced on omap3/4 based
pandaboard/beagle XM easily with steps below:

	- enable runtime pm
	echo auto > /sys/devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-1/1-1.1/power/control

	- ifconfig eth0 up

	- then out of memroy happened, see [1] for kernel message.

Follows my analysis:
	- 'ifconfig eth0 up' brings eth0 out of suspend, and usbnet_resume
	is called to schedule dev->bh, then rx urbs are submited to prepare for
	recieving data;

	- some usbnet devices will produce garbage rx packets flood if
	info->reset is not called in usbnet_open.

	- so there is no enough chances for usbnet_bh to handle and release
	recieved skb buffers since many rx interrupts consumes cpu, so out of memory
	for atomic allocation in rx_submit happened.

This patch fixes the issue by simply not allowing schedule of usbnet_bh until device
is opened.

[1], dmesg
[  234.712005] smsc95xx 1-1.1:1.0: rpm_resume flags 0x4
[  234.712066] usb 1-1.1: rpm_resume flags 0x0
[  234.712066] usb 1-1: rpm_resume flags 0x0
[  234.712097] usb usb1: rpm_resume flags 0x0
[  234.712127] usb usb1: usb auto-resume
[  234.712158] ehci-omap ehci-omap.0: resume root hub
[  234.754028] hub 1-0:1.0: hub_resume
[  234.754821] hub 1-0:1.0: port 1: status 0507 change 0000
[  234.756011] hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
[  234.756042] hub 1-0:1.0: rpm_resume flags 0x4
[  234.756072] usb usb1: rpm_resume flags 0x0
[  234.756164] usb usb1: rpm_resume returns 1
[  234.756195] hub 1-0:1.0: rpm_resume returns 0
[  234.756195] hub 1-0:1.0: rpm_suspend flags 0x4
[  234.756225] hub 1-0:1.0: rpm_suspend returns 0
[  234.756256] usb usb1: rpm_resume returns 0
[  234.757141] usb 1-1: usb auto-resume
[  234.793151] ehci-omap ehci-omap.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[  234.816558] usb 1-1: finish resume
[  234.817871] hub 1-1:1.0: hub_resume
[  234.818420] hub 1-1:1.0: port 1: status 0507 change 0000
[  234.820495] ehci-omap ehci-omap.0: reused qh eec50220 schedule
[  234.820495] usb 1-1: link qh256-0001/eec50220 start 1 [1/0 us]
[  234.820587] usb 1-1: rpm_resume returns 0
[  234.820800] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0000
[  234.820800] hub 1-1:1.0: rpm_resume flags 0x4
[  234.820831] hub 1-1:1.0: rpm_resume returns 0
[  234.820861] hub 1-1:1.0: rpm_suspend flags 0x4
[  234.820861] hub 1-1:1.0: rpm_suspend returns 0
[  234.821777] usb 1-1.1: usb auto-resume
[  234.868591] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0002
[  234.868591] hub 1-1:1.0: rpm_resume flags 0x4
[  234.868621] hub 1-1:1.0: rpm_resume returns 0
[  234.868652] hub 1-1:1.0: rpm_suspend flags 0x4
[  234.868652] hub 1-1:1.0: rpm_suspend returns 0
[  234.879486] usb 1-1.1: finish resume
[  234.880279] usb 1-1.1: rpm_resume returns 0
[  234.880310] smsc95xx 1-1.1:1.0: rpm_resume returns 0
[  238.880187] ksoftirqd/0: page allocation failure. order:0, mode:0x20
[  238.880218] Backtrace:
[  238.880249] [<c01b9800>] (dump_backtrace+0x0/0xf8) from [<c065e1dc>] (dump_stack+0x18/0x1c)
[  238.880249]  r6:00000000 r5:00000000 r4:00000020 r3:00000002
[  238.880310] [<c065e1c4>] (dump_stack+0x0/0x1c) from [<c026ece4>] (__alloc_pages_nodemask+0x620/0x724)
[  238.880340] [<c026e6c4>] (__alloc_pages_nodemask+0x0/0x724) from [<c02986d4>] (kmem_getpages.clone.34+0x34/0xc8)
[  238.880371] [<c02986a0>] (kmem_getpages.clone.34+0x0/0xc8) from [<c02988f8>] (cache_grow.clone.42+0x84/0x154)
[  238.880371]  r6:ef871aa4 r5:ef871a80 r4:ef81fd40 r3:00000020
[  238.880401] [<c0298874>] (cache_grow.clone.42+0x0/0x154) from [<c0298b64>] (cache_alloc_refill+0x19c/0x1f0)
[  238.880432] [<c02989c8>] (cache_alloc_refill+0x0/0x1f0) from [<c0299804>] (kmem_cache_alloc+0x90/0x190)
[  238.880462] [<c0299774>] (kmem_cache_alloc+0x0/0x190) from [<c052e260>] (__alloc_skb+0x34/0xe8)
[  238.880493] [<c052e22c>] (__alloc_skb+0x0/0xe8) from [<bf0509f4>] (rx_submit+0x2c/0x1d4 [usbnet])
[  238.880523] [<bf0509c8>] (rx_submit+0x0/0x1d4 [usbnet]) from [<bf050d38>] (rx_complete+0x19c/0x1b0 [usbnet])
[  238.880737] [<bf050b9c>] (rx_complete+0x0/0x1b0 [usbnet]) from [<bf006fd0>] (usb_hcd_giveback_urb+0xa8/0xf4 [usbcore])
[  238.880737]  r8:eeeced34 r7:eeecec00 r6:eeecec00 r5:00000000 r4:eec2dd20
[  238.880767] r3:bf050b9c
[  238.880859] [<bf006f28>] (usb_hcd_giveback_urb+0x0/0xf4 [usbcore]) from [<bf03c8f8>] (ehci_urb_done+0xb0/0xbc [ehci_hcd])
[  238.880859]  r6:00000000 r5:eec2dd20 r4:eeeced44 r3:eec2dd34
[  238.880920] [<bf03c848>] (ehci_urb_done+0x0/0xbc [ehci_hcd]) from [<bf040204>] (qh_completions+0x308/0x3bc [ehci_hcd])
[  238.880920]  r7:00000000 r6:eeda21a0 r5:ffdfe3c0 r4:eeda21ac
[  238.880981] [<bf03fefc>] (qh_completions+0x0/0x3bc [ehci_hcd]) from [<bf040ef8>] (scan_async+0xb0/0x16c [ehci_hcd])
[  238.881011] [<bf040e48>] (scan_async+0x0/0x16c [ehci_hcd]) from [<bf040fec>] (ehci_work+0x38/0x90 [ehci_hcd])
[  238.881042] [<bf040fb4>] (ehci_work+0x0/0x90 [ehci_hcd]) from [<bf042940>] (ehci_irq+0x300/0x34c [ehci_hcd])
[  238.881072]  r4:eeeced34 r3:00000001
[  238.881134] [<bf042640>] (ehci_irq+0x0/0x34c [ehci_hcd]) from [<bf006828>] (usb_hcd_irq+0x40/0xac [usbcore])
[  238.881195] [<bf0067e8>] (usb_hcd_irq+0x0/0xac [usbcore]) from [<c0239764>] (handle_irq_event_percpu+0xb8/0x240)
[  238.881225]  r6:eec504e0 r5:0000006d r4:eec504e0 r3:bf0067e8
[  238.881256] [<c02396ac>] (handle_irq_event_percpu+0x0/0x240) from [<c0239930>] (handle_irq_event+0x44/0x64)
[  238.881256] [<c02398ec>] (handle_irq_event+0x0/0x64) from [<c023bbd0>] (handle_level_irq+0xe0/0x114)
[  238.881286]  r6:0000006d r5:c080c14c r4:c080c100 r3:00020000
[  238.881317] [<c023baf0>] (handle_level_irq+0x0/0x114) from [<c01ab090>] (asm_do_IRQ+0x90/0xd0)
[  238.881317]  r5:00000000 r4:0000006d
[  238.881347] [<c01ab000>] (asm_do_IRQ+0x0/0xd0) from [<c06624d0>] (__irq_svc+0x50/0x134)
[  238.881378] Exception stack(0xef837e20 to 0xef837e68)
[  238.881378] 7e20: 00000001 00185610 016cc000 c00490c0 eb380000 ef800540 00000020 00004ae0
[  238.881408] 7e40: 00000020 bf0509f4 60000013 ef837e9c ef837e40 ef837e68 c0226f0c c0298ca0
[  238.881408] 7e60: 20000013 ffffffff
[  238.881408]  r5:fa240100 r4:ffffffff
[  238.881439] [<c0298bb8>] (__kmalloc_track_caller+0x0/0x1d0) from [<c052e284>] (__alloc_skb+0x58/0xe8)
[  238.881469] [<c052e22c>] (__alloc_skb+0x0/0xe8) from [<bf0509f4>] (rx_submit+0x2c/0x1d4 [usbnet])
[  238.881500] [<bf0509c8>] (rx_submit+0x0/0x1d4 [usbnet]) from [<bf0513d8>] (usbnet_bh+0x1b4/0x250 [usbnet])
[  238.881530] [<bf051224>] (usbnet_bh+0x0/0x250 [usbnet]) from [<c01f912c>] (tasklet_action+0xb0/0x1f8)
[  238.881530]  r6:00000000 r5:ef9757f0 r4:ef9757ec r3:bf051224
[  238.881561] [<c01f907c>] (tasklet_action+0x0/0x1f8) from [<c01f97ac>] (__do_softirq+0x140/0x290)
[  238.881561]  r8:00000006 r7:00000101 r6:00000000 r5:c0806098 r4:00000001
[  238.881591] r3:c01f907c
[  238.881622] [<c01f966c>] (__do_softirq+0x0/0x290) from [<c01f99cc>] (run_ksoftirqd+0xd0/0x1f4)
[  238.881622] [<c01f98fc>] (run_ksoftirqd+0x0/0x1f4) from [<c02113b0>] (kthread+0x90/0x98)
[  238.881652]  r7:00000013 r6:c01f98fc r5:00000000 r4:ef831efc
[  238.881683] [<c0211320>] (kthread+0x0/0x98) from [<c01f62f4>] (do_exit+0x0/0x374)
[  238.881713]  r6:c01f62f4 r5:c0211320 r4:ef831efc
[  238.881713] Mem-info:
[  238.881744] Normal per-cpu:
[  238.881744] CPU    0: hi:  186, btch:  31 usd:  38
[  238.881744] CPU    1: hi:  186, btch:  31 usd: 169
[  238.881774] HighMem per-cpu:
[  238.881774] CPU    0: hi:   90, btch:  15 usd:  66
[  238.881774] CPU    1: hi:   90, btch:  15 usd:  86
[  238.881805] active_anon:544 inactive_anon:71 isolated_anon:0
[  238.881805]  active_file:926 inactive_file:2538 isolated_file:0
[  238.881805]  unevictable:0 dirty:10 writeback:0 unstable:0
[  238.881805]  free:57782 slab_reclaimable:864 slab_unreclaimable:186898
[  238.881805]  mapped:632 shmem:144 pagetables:50 bounce:0
[  238.881835] Normal free:1328kB min:3532kB low:4412kB high:5296kB active_anon:0kB inactive_anon:0kB active_file:880kB inactive_file:848kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:780288kB mlocked:0kB dirty:36kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:3456kB slab_unreclaimable:747592kB kernel_stack:392kB pagetables:200kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
[  238.881866] lowmem_reserve[]: 0 1904 1904
[  238.881896] HighMem free:229800kB min:236kB low:508kB high:784kB active_anon:2176kB inactive_anon:284kB active_file:2824kB inactive_file:9304kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:243712kB mlocked:0kB dirty:4kB writeback:0kB mapped:2528kB shmem:576kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
[  238.881927] lowmem_reserve[]: 0 0 0
[  238.881958] Normal: 0*4kB 4*8kB 6*16kB 0*32kB 1*64kB 1*128kB 0*256kB 2*512kB 0*1024kB 0*2048kB 0*4096kB = 1344kB
[  238.882019] HighMem: 6*4kB 2*8kB 4*16kB 4*32kB 1*64kB 1*128kB 0*256kB 2*512kB 3*1024kB 0*2048kB 55*4096kB = 229800kB
[  238.882080] 3610 total pagecache pages
[  238.882080] 0 pages in swap cache
[  238.882080] Swap cache stats: add 0, delete 0, find 0/0
[  238.882110] Free swap  = 0kB
[  238.882110] Total swap = 0kB
[  238.933776] 262144 pages of RAM
[  238.933776] 58240 free pages
[  238.933776] 10503 reserved pages
[  238.933776] 187773 slab pages
[  238.933807] 2475 pages shared
[  238.933807] 0 pages swap cached

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05 10:39:43 -07:00
John W. Linville
a70171dce9 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
Conflicts:
	drivers/net/wireless/libertas/if_cs.c
	drivers/net/wireless/rtlwifi/pci.c
	net/bluetooth/l2cap_sock.c
2011-05-05 13:32:35 -04:00
David S. Miller
5a412ad7f4 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-next-2.6 2011-05-04 13:54:50 -07:00
Don Skidmore
6716344c52 ixgbe: Cleanup PCIe bus speed info
PCIe connections should be expressed as GT/s (GigaTransfers per second)
instead of the current Gb/s (Gigabits per second).  In addition, it is
incorrect because (due to PCIe gen 1 & 2 having a 20% overhead) the
actually data rate, when expressed in Gb/s, is only 80% of the rate of
GT/s.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-04 12:18:22 -07:00
Emil Tantilov
68c7005d66 ixgbe: improve EEPROM read/write operations
Introduce buffered read/writes which greatly improves performance on
parts with large EEPROMs.

Previously reading/writing a word requires taking/releasing of synchronization
semaphores which adds 10ms to each operation. The optimization is to
read/write in buffers, but make sure the semaphore is not held for >500ms
according to the datasheet.

Since we can't read the EEPROM page size ixgbe_detect_eeprom_page_size() is
used to discover the EEPROM size when needed and keeps the result in
word_page_size for the rest of the run time.

Use buffered reads for ethtool -e.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-04 12:17:33 -07:00
Emil Tantilov
95a4601184 ixgbe: fix sparse warning
warning: symbol 'before' shadows an earlier one

Convert large macros to functions similar to e1000e.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Acked-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-04 12:16:16 -07:00
Don Skidmore
2698b20842 ixgbe: fix typo error with software defined pins on 82599
Correcting a simple typo with enabling software defined pins.  I don't
believe this was causing any issues but this is how it was meant to be
implemented.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-04 12:15:03 -07:00
Emil Tantilov
6d980c3e50 ixgbe: Use function pointer for ixgbe_acquire/release_swfw_sync()
Change remaining direct calls to function pointers.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-04 12:13:59 -07:00
stephen hemminger
97322b3303 igbvf: remove bogus phys_id
This device lies about supporting phys_id. Remove it and just
let the upper layer report not supported.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Tested-by: <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-04 12:12:22 -07:00
Carolyn Wyborny
f6b1bfd17d igb: Add check for invalid size to igb_get_invariants_82575()
Recent commits have changed how EEPROM size is checked and if the size
word is misconfigured, the driver will fail to load.  This patch adds a
check for invalid size word in the EEPROM and uses default size instead
for 82576 parts.

Reported-by: Stefan Assmann <sassmann@redhat.com>
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-04 12:09:53 -07:00
Jeff Kirsher
ec7e97e9a0 ixgb: convert to set_phys_id
Based on the original patch sent by Stephen Hemminger.

This version incorporates the ethtool changes that Bruce Allan
submitted.

CC: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
2011-05-04 12:07:41 -07:00
Emil Tantilov
dca97ad2ec e100: fix build warning
In function 'e100_hw_init':
warning: 'err' may be used uninitialized in this function

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by:  Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-04 12:01:24 -07:00
David S. Miller
28c90da02e pptp: Use flowi4's daddr/saddr in pptp_xmit().
Instead of rt->rt_{src,dst}

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-03 20:41:42 -07:00
David S. Miller
31e4543db2 ipv4: Make caller provide on-stack flow key to ip_route_output_ports().
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-03 20:25:42 -07:00