generic setattr not longer responsible for quota transfer.
use jfs_setattr for all jfs's inodes.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (33 commits)
quota: stop using QUOTA_OK / NO_QUOTA
dquot: cleanup dquot initialize routine
dquot: move dquot initialization responsibility into the filesystem
dquot: cleanup dquot drop routine
dquot: move dquot drop responsibility into the filesystem
dquot: cleanup dquot transfer routine
dquot: move dquot transfer responsibility into the filesystem
dquot: cleanup inode allocation / freeing routines
dquot: cleanup space allocation / freeing routines
ext3: add writepage sanity checks
ext3: Truncate allocated blocks if direct IO write fails to update i_size
quota: Properly invalidate caches even for filesystems with blocksize < pagesize
quota: generalize quota transfer interface
quota: sb_quota state flags cleanup
jbd: Delay discarding buffers in journal_unmap_buffer
ext3: quota_write cross block boundary behaviour
quota: drop permission checks from xfs_fs_set_xstate/xfs_fs_set_xquota
quota: split out compat_sys_quotactl support from quota.c
quota: split out netlink notification support from quota.c
quota: remove invalid optimization from quota_sync_all
...
Fixed trivial conflicts in fs/namei.c and fs/ufs/inode.c
This gives the filesystem more information about the writeback that
is happening. Trond requested this for the NFS unstable write handling,
and other filesystems might benefit from this too by beeing able to
distinguish between the different callers in more detail.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Currently notify_change calls vfs_dq_transfer directly. This means
we tie the quota code into the VFS. Get rid of that and make the
filesystem responsible for the transfer. Most filesystems already
do this, only ufs and udf need the code added, and for jfs it needs to
be enabled unconditionally instead of only when ACLs are enabled.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
The ioctls were already compatible except for the actual values so this
was fairly easy to do.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Convert jfs_ioctl over to not use the BKL. The only potential race
I could see was with two ioctls in parallel changing the flags
and losing the updates. Use the i_mutex to protect against this.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Stop the JFS filesystem from using iget() and read_inode(). Replace
jfs_read_inode() with jfs_iget(), and call that instead of iget(). jfs_iget()
then uses iget_locked() directly and returns a proper error code instead of an
inode in the event of an error.
jfs_fill_super() returns any error incurred when getting the root inode
instead of EINVAL.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Trivial switch over to the new generic helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Neil Brown <neilb@suse.de>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the exportfs interface was added the expectation was that filesystems
provide an operation to convert from a file handle to an inode/dentry, but it
kept a backwards compat option that still calls into iget.
Calling into iget from non-filesystem code is very bad, because it gives too
little information to filesystem, and simply crashes if the filesystem doesn't
implement the ->read_inode routine.
Fortunately there are only two filesystems left using this fallback: efs and
jfs. This patch moves a copy of export_iget to each of those to implement the
get_dentry method.
While this is a temporary increase of lines of code in the kernel it allows
for a much cleaner interface and important code restructuring in later
patches.
[akpm@linux-foundation.org: add jfs_get_inode_flags() declaration]
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This mirrors Jan Kara's patches for ext3. This patch makes sure that
changes made to inode->i_flags are reflected on disk for jfs. It also
moves a call of jfs_set_inode_flags() to be more consistent with where
jfs_get_inode_flags() is called.
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Many struct inode_operations in the kernel can be "const". Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data. In addition it'll catch accidental writes at compile time to
these shared resources.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Removed trailing spaces & tabs, and spaces preceding tabs.
Also a couple very minor comment cleanups.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
(cherry picked from f74156539964d7b3d5164fdf8848e6a682f75b97 commit)
jfs_quota_read/write are very near duplicates of ext2_quota_read/write.
Cleaned up jfs_get_block as long as I had to change it to be non-static.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Same as with already do with the file operations: keep them in .rodata and
prevents people from doing runtime patching.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is a conversion to make the various file_operations structs in fs/
const. Basically a regexp job, with a few manual fixups
The goal is both to increase correctness (harder to accidentally write to
shared datastructures) and reducing the false sharing of cachelines with
things that get dirty in .data (while .rodata is nicely read only and thus
cache clean)
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ext2 inode attributes with relevance for jfs:
'a' EXT2_APPEND_FL -> append only
'i' EXT2_IMMUTABLE_FL -> immutable file
's' EXT2_SECRM_FL -> zero file
'u' EXT2_UNRM_FL -> allow for unrm
'A' EXT2_NOATIME_FL -> no access time
'D' EXT2_DIRSYNC_FL -> dirsync
'S' EXT2_SYNC_FL -> sync
overview of jfs flags (partially for OS/2)
value (OS/2) Linux ext2 attrs
------------------------------------------------
0x00010000 IFJOURNAL -
0x00020000 ISPARSE used
0x00040000 INLINEEA used
0x00080000 - - JFS_NOATIME_FL
0x00100000 - - JFS_DIRSYNC_FL
0x00200000 - - JFS_SYNC_FL
0x00400000 - - JFS_SECRM_FL
0x00800000 ISWAPFILE - JFS_UNRM_FL
0x01000000 - - JFS_APPEND_FL
0x02000000 IREADONLY - JFS_IMMUTABLE_FL
0x04000000 IHIDDEN - -
0x08000000 ISYSTEM - -
0x10000000 - -
0x20000000 IDIRECTORY used
0x40000000 IARCHIVE -
0x80000000 INEWNAME -
the implementation is straight forward, except
for the fact that the attributes have to be mapped
to match with the ext2 ones to avoid a separate
tool for manipulating them (this could be avoided
when using a separate flag field in the on-disk
representation, but the overhead is minimal)
a special jfs_ioctl is added to allow for the new
JFS_IOC_GETFLAGS and JFS_IOC_SETFLAGS calls.
a helper function jfs_set_inode_flags() to transfer
the flags from the on-disk version to the inode
minor changes to allow flag inheritance on inode
creation, as well as a cleanup of the on-disk
flags (including the new ones)
beforementioned helper to map between ext2 and jfs
versions of the new flags ...
the JFS_SECRM_FL and JFS_UNRM_FL are not done yet
and I'm not 100% sure they are worth the effort,
the rest seems to work out of the box ...
Signed-off-by: Herbert Poetzl <herbert@13thfloor.at>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
