Commit graph

13 commits

Author SHA1 Message Date
Arnd Bergmann
cb64babf9e More PRCM cleanups via Paul Walmsley <paul@pwsan.com>:
Second set of OMAP PRCM cleanups for 3.8.
 
 These patches remove the use of omap_prcm_get_reset_sources() from the
 OMAP watchdog driver, and remove mach-omap2/prcm.c and
 plat-omap/include/plat/prcm.h.
 
 Basic test logs for this branch on top of Tony's cleanup-prcm branch
 at commit 7fc54fd308 are here:
 
     http://www.pwsan.com/omap/testlogs/prcm_cleanup_b_3.8/20121108151646/
 
 However, cleanup-prcm at 7fc54fd3 does not include some fixes
 that are needed for a successful test.  With several reverts,
 fixes, and workarounds applied, the following test logs were
 obtained:
 
     http://www.pwsan.com/omap/testlogs/TEST_prcm_cleanup_b_3.8/20121108151930/
 
 which indicate that the series tests cleanly.
 
 This second pull request updates one of the patches which broke
 with rmk's allnoconfigs, and also updates the tag description to
 indicate that 7fc54fd3 is building cleanly here.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQoY0GAAoJEBvUPslcq6Vza0MQAI0idVoOclIHCC63tpc58YWA
 BpD5OLg4yRu0RUFS1CI/Fq5d+9PfYUspgaWja3TTgUy0EHRDVUUFRaxJdpWdl2NF
 gX7BCuhnQenznTbCE80nEmxvsh7U/dfvs+JYUK2PriypU61f1+TnSu9ZxTRvDJOx
 vbo1cfsioVcLfnBPSDSQVJ1fufbafklpeQkDNeRI8UDsCVeXwnxhNsXB3utoJMf0
 5gaDaCdRBoimkLnAaLi41OnHYC7IbNCnl/VX0i/xffROsINfL7LDkBPfUOnR5vle
 jTCV49UEB/P5ekk2cvKKj8IOQZdimiCppWMLit6DObX7LbltTKuXx6T0PclgxQ14
 hhav5O+f8NYA4yDAY/xxPlTvShMr8rQcYV6pg1G1OgD+dcq7cbbWNJAvbUJ03hH8
 dqZ+ypLYkazb3Mm5XtpFr47gkoaFnCQbgZLXpjJ8+L01aGNrF2L6aE789So1N81+
 X1s0ENjRxzDLNcqwxqhcoph0YQe7GlyiviYb7ev25MTSC3/TjrupTViZbKocZmLt
 Ad9m4SOktbHthAw0jdA48vOmPiSvmYzFiqzMhz/ryeNbyyV6rRxe5w4JUjPzHPxc
 U7NraSGIAzpqM3EKEp7Rb0yOfh6sGzML/FH9bS25+Rv37yKW0huc6ENIRgatZpY2
 blLzsxaKfQgLeqKT82mj
 =tS2z
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v3.8/cleanup-prcm-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

From Tony Lindgren <tony@atomide.com>:

More PRCM cleanups via Paul Walmsley <paul@pwsan.com>:

Second set of OMAP PRCM cleanups for 3.8.

These patches remove the use of omap_prcm_get_reset_sources() from the
OMAP watchdog driver, and remove mach-omap2/prcm.c and
plat-omap/include/plat/prcm.h.

Basic test logs for this branch on top of Tony's cleanup-prcm branch
at commit 7fc54fd308 are here:

    http://www.pwsan.com/omap/testlogs/prcm_cleanup_b_3.8/20121108151646/

However, cleanup-prcm at 7fc54fd3 does not include some fixes
that are needed for a successful test.  With several reverts,
fixes, and workarounds applied, the following test logs were
obtained:

    http://www.pwsan.com/omap/testlogs/TEST_prcm_cleanup_b_3.8/20121108151930/

which indicate that the series tests cleanly.

This second pull request updates one of the patches which broke
with rmk's allnoconfigs, and also updates the tag description to
indicate that 7fc54fd3 is building cleanly here.

* tag 'omap-for-v3.8/cleanup-prcm-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (27 commits)
  ARM: OMAP2: Fix compillation error in cm_common
  ARM: OMAP2+: PRCM: remove obsolete prcm.[ch]
  ARM: OMAP2+: hwmod: call to _omap4_disable_module() should use the SoC-specific call
  ARM: OMAP2+: PRCM: consolidate PRCM-related timeout macros
  ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup
  ARM: OMAP2+: PRCM: remove omap2_cm_wait_idlest()
  ARM: OMAP2+: CM/clock: convert _omap2_module_wait_ready() to use SoC-independent CM functions
  ARM: OMAP2xxx: APLL/CM: convert to use omap2_cm_wait_module_ready()
  ARM: OMAP2+: board files: use SoC-specific system restart functions
  ARM: OMAP2+: PRCM: create SoC-specific chip restart functions
  ARM: OMAP2xxx: clock: move virt_prcm_set code into clkt2xxx_virt_prcm_set.c
  ARM: OMAP2xxx: clock: remove global 'dclk' variable
  ARM: OMAP2/3: PRM: add SoC reset functions (using the CORE DPLL method)
  ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code
  ARM: OMAP2+: PRCM: remove omap_prcm_get_reset_sources()
  watchdog: OMAP: use standard GETBOOTSTATUS interface; use platform_data fn ptr
  ARM: OMAP2+: WDT: move init; add read_reset_sources pdata function pointer
  ARM: OMAP1: CGRM: fix omap1_get_reset_sources() return type
  ARM: OMAP2+: PRM: create PRM reset source API for the watchdog timer driver
  ARM: OMAP1: create read_reset_sources() function (for initial use by watchdog)
  ...

Conflicts:
	arch/arm/mach-omap2/cm33xx.c
	arch/arm/mach-omap2/io.c
	arch/arm/mach-omap2/prm_common.c

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-15 17:08:51 +01:00
Paul Walmsley
b13159afb4 ARM: OMAP2+: PRCM: consolidate PRCM-related timeout macros
Consolidate all of the copies of MAX_MODULE_HARDRESET_WAIT and
MAX_MODULE_SOFTRESET_WAIT into one place, arch/arm/mach-omap2/prm.h.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
2012-11-08 15:09:26 -07:00
Tony Lindgren
c34f7c6962 ARM: OMAP: Make plat-omap/i2c.c port checks local
The common code should not have any omap1 or omap2+
specific code, and should not need to call the cpu_is_omap
macros.

The only remaining user for cpu_is_omap macros is
omap_i2c_nr_ports(). Let's make those checks in
the omap specific implementation of omap_i2c_add_bus()
instead in order to remove cpu_is_omap usage from
the common code.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-31 15:37:13 -07:00
Tony Lindgren
e4c060db2c ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2
We want to remove plat/cpu.h. To do this, let's first split
it to private soc.h to mach-omap1 and mach-omap2. We have to
keep plat/cpu.h around until the remaining drivers are fixed,
so let's include the local soc.h in plat/cpu.h and for drivers
still including plat/cpu.h.

Once the drivers are fixed not to include plat/cpu.h, we
can remove the file.

This is needed for the ARM common zImage support.

[tony@atomide.com: updated to not print a warning]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-18 16:23:46 -07:00
Tony Lindgren
2a296c8f89 ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2
Let's make omap_hwmod local to mach-omap2 for
ARM common zImage support.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-18 16:05:55 -07:00
Tony Lindgren
25c7d49ed4 ARM: OMAP: Make omap_device local to mach-omap2
Let's make omap_device local to mach-omap2 for
ARM common zImage support.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-17 12:08:40 -07:00
Tony Lindgren
3a8761c027 ARM: OMAP: Split plat-omap/i2c.c into mach-omap1 and mach-omap2
There's no need to keep the device related things in the
common i2c.c as omap2+ is using hwmod. Split the code to
mach-omap1 and mach-omap2 parts and only leave common
code to plat-omap/i2c.c.

Note that as omap1 only has one i2c controller, we can
now remove the old device related macros.

Reviewed-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-17 11:36:50 -07:00
Tony Lindgren
dbc0416104 ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+
As the plat and mach includes need to disappear for single zImage work,
we need to remove plat/hardware.h.

Do this by splitting plat/hardware.h into omap1 and omap2+ specific files.

The old plat/hardware.h already has omap1 only defines, so it gets moved
to mach/hardware.h for omap1. For omap2+, we use the local soc.h
that for now just includes the related SoC headers to keep this patch more
readable.

Note that the local soc.h still includes plat/cpu.h that can be dealt
with in later patches. Let's also include plat/serial.h from common.h for
all the board-*.c files. This allows making the include files local later
on without patching these files again.

Note that only minimal changes are done in this patch for the
drivers/watchdog/omap_wdt.c driver to keep things compiling. Further
patches are needed to eventually remove cpu_is_omap usage in the drivers.

Also only minimal changes are done to sound/soc/omap/* to remove the
unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's
no need to include omap44xx.h.

While at it, also sort some of the includes in the standard way.

Cc: linux-watchdog@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Jarkko Nikula <jarkko.nikula@bitmer.com>
Cc: Liam Girdwood <lrg@ti.com>
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-12 18:06:31 -07:00
Tony Lindgren
4e65331c6b ARM: 7159/1: OMAP: Introduce local common.h files
As suggested by Russell King - ARM Linux <linux@arm.linux.org.uk>,
there's no need to keep local prototypes in non-local headers.

Add mach-omap1/common.h and mach-omap2/common.h and move the
local prototypes there from plat/common.h and mach/omap4-common.h.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-17 17:09:30 +00:00
Avinash.H.M
6d3c55fd4f OMAP: hwmod: fix the i2c-reset timeout during bootup
The sequence of _ocp_softreset doesn't work for i2c. The i2c module has a
special sequence to reset the module. The sequence is
 - Disable the I2C.
 - Write to SOFTRESET bit.
 - Enable the I2C.
 - Poll on the RESETDONE bit.
The sequence is implemented as a function and the i2c_class is updated with
the correct 'reset' pointer.  omap_hwmod_softreset function is implemented
which triggers the softreset by writing into sysconfig register. On following
this sequence, i2c module resets properly and timeouts are not seen.

Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Signed-off-by: Avinash.H.M <avinashhm@ti.com>
[paul@pwsan.com: combined this patch with a patch to remove
 HWMOD_INIT_NO_RESET from the 44xx hwmod flags; change register
 offset conditional code to use the IP block revision; minor code
 cleanup]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-10 05:27:16 -06:00
Tony Lindgren
f99bf16d70 omap: mux: Convert 2420 platform init code to use new mux code
Convert 2420 platform init code to use new mux code

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:40 +03:00
Jarkko Nikula
9833eff3d7 omap: i2c: Fix muxing for command line enabled bus
The commit b63128e812 broke the pin muxing
for I2C busses that are enabled from the kernel command line.

Fix this by defining the board registration function omap_register_i2c_bus
in common platform code as it was before but keep the muxing in architecture
dependent files.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-25 14:45:08 -08:00
Tony Lindgren
b63128e812 omap: Split i2c platform init for mach-omap1 and mach-omap2
Otherwise we cannot limit new mux code to mach-omap2.
The same signal names should eventually work for other
omaps under mach-omap2.

Note that these pins don't need to be OMAP_PIN_INPUT_PULLUP,
just OMAP_PIN_INPUT is enough.

Cc: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:32 -08:00