Commit graph

126185 commits

Author SHA1 Message Date
Sam Ravnborg
473321fc37 MAINTAINERS: update sparc maintainer
Reflect the current situation where David Miller
is the sparc maintainer.

I have tried to contact Bill on following adresses:

    wli@holomorphy.com
    wlirwin@us.ibm.com

with no success and Bill has not been active on the
sparclinux mailing list for a long time.

As sparc and sparc64 are unified I unified the two entries
in the MAINTAINERS file too.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 15:47:49 -08:00
Sam Ravnborg
83c86984bf sparc: unify ipcbuf.h
The ony difference is the size of the mode.
sparc has extra padding to compensate for this.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 15:44:52 -08:00
Heiko Carstens
9e01892c42 module: convert to stop_machine_create/destroy.
The module code relies on a non-failing stop_machine call. So we create
the kstop threads in advance and with that make sure the call won't fail.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-01-05 08:40:15 +10:30
Heiko Carstens
9ea09af3bd stop_machine: introduce stop_machine_create/destroy.
Introduce stop_machine_create/destroy. With this interface subsystems
that need a non-failing stop_machine environment can create the
stop_machine machine threads before actually calling stop_machine.
When the threads aren't needed anymore they can be killed with
stop_machine_destroy again.

When stop_machine gets called and the threads aren't present they
will be created and destroyed automatically. This restores the old
behaviour of stop_machine.

This patch also converts cpu hotplug to the new interface since it
is special: cpu_down calls __stop_machine instead of stop_machine.
However the kstop threads will only be created when stop_machine
gets called.

Changing the code so that the threads would be created automatically
on __stop_machine is currently not possible: when __stop_machine gets
called we hold cpu_add_remove_lock, which is the same lock that
create_rt_workqueue would take. So the workqueue needs to be created
before the cpu hotplug code locks cpu_add_remove_lock.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-01-05 08:40:14 +10:30
Helge Deller
c298be7449 parisc: fix module loading failure of large kernel modules
On 32bit (and sometimes 64bit) and with big kernel modules like xfs or
ipv6 the relocation types R_PARISC_PCREL17F and R_PARISC_PCREL22F may
fail to reach their PLT stub if we only create one big stub array for
all sections at the beginning of the core or init section.

With this patch we now instead add individual PLT stub entries
directly in front of the code sections where the stubs are actually
called. This reduces the distance between the PCREL location and the
stub entry so that the relocations can be fulfilled.

While calculating the final layout of the kernel module in memory, the
kernel module loader calls arch_mod_section_prepend() to request the
to be reserved amount of memory in front of each individual section.

Tested with 32- and 64bit kernels.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-01-05 08:40:14 +10:30
Helge Deller
088af9a6e0 module: fix module loading failure of large kernel modules for parisc
When creating the final layout of a kernel module in memory, allow the
module loader to reserve some additional memory in front of a given section.
This is currently only needed for the parisc port which needs to put the
stub entries there to fulfill the 17/22bit PCREL relocations with large
kernel modules like xfs.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (renamed fn)
2009-01-05 08:40:13 +10:30
Jianjun Kong
d1e99d7ae4 module: fix warning of unused function when !CONFIG_PROC_FS
Fix this warning:
kernel/module.c:824: warning: ‘print_unload_info’ defined but not used
print_unload_info() just was used when CONFIG_PROC_FS was defined.
This patch mark print_unload_info() inline to solve the problem.

Signed-off-by: Jianjun Kong <jianjun@zeuux.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
CC: Ingo Molnar <mingo@elte.hu>
CC: Américo Wang <xiyou.wangcong@gmail.com>
2009-01-05 08:40:11 +10:30
Tim Abbott
ca4787b779 kernel/module.c: compare symbol values when marking symbols as exported in /proc/kallsyms.
When there are two symbols in a module with the same name, one of which is
exported, both will be marked as exported in /proc/kallsyms.  There aren't
any instances of this in the current kernel, but it is easy to construct a
simple module with two compilation units that exhibits the problem.

$ objdump -j .text -t testmod.ko | grep foo
00000000 l     F .text	00000032 foo
00000080 g     F .text	00000001 foo
$ sudo insmod testmod.ko
$ grep "T foo" /proc/kallsyms
c28e8000 T foo	[testmod]
c28e8080 T foo	[testmod]

Fix this by comparing the symbol values once we've found the exported
symbol table entry matching the symbol name.  Tested using Ksplice:

$ ksplice-create --patch=this_commit.patch --id=bar .
$ sudo ksplice-apply ksplice-bar.tar.gz
Done!
$ grep "T foo" /proc/kallsyms
c28e8080 T foo	[testmod]

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-01-05 08:40:11 +10:30
Johannes Berg
a327ca2c26 remove CONFIG_KMOD
Now that nothing depends on it any more, remove CONFIG_KMOD.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-01-05 08:40:10 +10:30
Alessandro Zummo
099e657625 rtc: add alarm/update irq interfaces
Add standard interfaces for alarm/update irqs enabling.  Drivers are no
more required to implement equivalent ioctl code as rtc-dev will provide
it.

UIE emulation should now be handled correctly and will work even for those
RTC drivers who cannot be configured to do both UIE and AIE.

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-04 13:33:20 -08:00
Nick Piggin
54566b2c15 fs: symlink write_begin allocation context fix
With the write_begin/write_end aops, page_symlink was broken because it
could no longer pass a GFP_NOFS type mask into the point where the
allocations happened.  They are done in write_begin, which would always
assume that the filesystem can be entered from reclaim.  This bug could
cause filesystem deadlocks.

The funny thing with having a gfp_t mask there is that it doesn't really
allow the caller to arbitrarily tinker with the context in which it can be
called.  It couldn't ever be GFP_ATOMIC, for example, because it needs to
take the page lock.  The only thing any callers care about is __GFP_FS
anyway, so turn that into a single flag.

Add a new flag for write_begin, AOP_FLAG_NOFS.  Filesystems can now act on
this flag in their write_begin function.  Change __grab_cache_page to
accept a nofs argument as well, to honour that flag (while we're there,
change the name to grab_cache_page_write_begin which is more instructive
and does away with random leading underscores).

This is really a more flexible way to go in the end anyway -- if a
filesystem happens to want any extra allocations aside from the pagecache
ones in ints write_begin function, it may now use GFP_KERNEL (rather than
GFP_NOFS) for common case allocations (eg.  ocfs2_alloc_write_ctxt, for a
random example).

[kosaki.motohiro@jp.fujitsu.com: fix ubifs]
[kosaki.motohiro@jp.fujitsu.com: fix fuse]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <stable@kernel.org>		[2.6.28.x]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Cleaned up the calling convention: just pass in the AOP flags
  untouched to the grab_cache_page_write_begin() function.  That
  just simplifies everybody, and may even allow future expansion of the
  logic.   - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-04 13:33:20 -08:00
Bruno Prémont
e687d691cb viafb: fix crashes due to 4k stack overflow
The function viafb_cursor() uses 2 stack-variables of CURSOR_SIZE bits;
CURSOR_SIZE is defined as (8 * 1024).  Using up twice 1k on stack is too
much for 4k-stack (though it works with 8k-stacks).  Make those two
variables kzalloc'ed to preserve stack space.

Also merge the whole lot of local struct's in viafb_ioctl into a union so
the stack usage gets minimized here as well.  (struct's are only accessed
in their indicidual IOCTL case) This second part is only compile-tested as
I know of no userspace app using the IOCTLs.

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Cc: <JosephChan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-04 13:33:20 -08:00
Pekka Enberg
c644f0e4b5 fs: introduce bgl_lock_ptr()
As suggested by Andreas Dilger, introduce a bgl_lock_ptr() helper in
<linux/blockgroup_lock.h> and add separate sb_bgl_lock() helpers to
filesystem specific header files to break the hidden dependency to
struct ext[234]_sb_info.

Also, while at it, convert the macros to static inlines to try make up
for all the times I broke Andrew Morton's tree.

Acked-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-04 13:33:20 -08:00
Randy Dunlap
0a30c5cefa spi.h uses/needs device.h
Include header files as used/needed:

  In file included from drivers/leds/leds-dac124s085.c:16:
  include/linux/spi/spi.h:66: error: field 'dev' has incomplete type
  include/linux/spi/spi.h: In function 'to_spi_device':
  include/linux/spi/spi.h💯 warning: type defaults to 'int' in declaration of '__mptr'
  ...

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-04 13:33:20 -08:00
Adam Lackorzynski
2e4e27c7d0 vmalloc.c: fix flushing in vmap_page_range()
The flush_cache_vmap in vmap_page_range() is called with the end of the
range twice.  The following patch fixes this for me.

Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-04 13:33:20 -08:00
Li Zefan
7b574b7b01 cgroups: fix a race between cgroup_clone and umount
The race is calling cgroup_clone() while umounting the ns cgroup subsys,
and thus cgroup_clone() might access invalid cgroup_fs, or kill_sb() is
called after cgroup_clone() created a new dir in it.

The BUG I triggered is BUG_ON(root->number_of_cgroups != 1);

  ------------[ cut here ]------------
  kernel BUG at kernel/cgroup.c:1093!
  invalid opcode: 0000 [#1] SMP
  ...
  Process umount (pid: 5177, ti=e411e000 task=e40c4670 task.ti=e411e000)
  ...
  Call Trace:
   [<c0493df7>] ? deactivate_super+0x3f/0x51
   [<c04a3600>] ? mntput_no_expire+0xb3/0xdd
   [<c04a3ab2>] ? sys_umount+0x265/0x2ac
   [<c04a3b06>] ? sys_oldumount+0xd/0xf
   [<c0403911>] ? sysenter_do_call+0x12/0x31
  ...
  EIP: [<c0456e76>] cgroup_kill_sb+0x23/0xe0 SS:ESP 0068:e411ef2c
  ---[ end trace c766c1be3bf944ac ]---

Cc: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: "Serge E. Hallyn" <serue@us.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-04 13:33:19 -08:00
Al Viro
5af75d8d58 audit: validate comparison operations, store them in sane form
Don't store the field->op in the messy (and very inconvenient for e.g.
audit_comparator()) form; translate to dense set of values and do full
validation of userland-submitted value while we are at it.

->audit_init_rule() and ->audit_match_rule() get new values now; in-tree
instances updated.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-04 15:14:42 -05:00
Al Viro
36c4f1b18c clean up audit_rule_{add,del} a bit
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-04 15:14:42 -05:00
Al Viro
e048e02c89 make sure that filterkey of task,always rules is reported
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-04 15:14:42 -05:00
Al Viro
e45aa212ea audit rules ordering, part 2
Fix the actual rule listing; add per-type lists _not_ used for matching,
with all exit,... sitting on one such list.  Simplifies "do something
for all rules" logics, while we are at it...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-04 15:14:42 -05:00
Al Viro
0590b9335a fixing audit rule ordering mess, part 1
Problem: ordering between the rules on exit chain is currently lost;
all watch and inode rules are listed after everything else _and_
exit,never on one kind doesn't stop exit,always on another from
being matched.

Solution: assign priorities to rules, keep track of the current
highest-priority matching rule and its result (always/never).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-04 15:14:41 -05:00
Al Viro
1a9d0797b8 audit_update_lsm_rules() misses the audit_inode_hash[] ones
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-04 15:14:41 -05:00
Al Viro
57f71a0af4 sanitize audit_log_capset()
* no allocations
* return void
* don't duplicate checked for dummy context

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-04 15:14:41 -05:00
Al Viro
157cf649a7 sanitize audit_fd_pair()
* no allocations
* return void

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-04 15:14:41 -05:00
Al Viro
564f6993ff sanitize audit_mq_open()
* don't bother with allocations
* don't do double copy_from_user()
* don't duplicate parts of check for audit_dummy_context()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-04 15:14:41 -05:00
Al Viro
c32c8af43b sanitize AUDIT_MQ_SENDRECV
* logging the original value of *msg_prio in mq_timedreceive(2)
  is insane - the argument is write-only (i.e. syscall always
  ignores the original value and only overwrites it).
* merge __audit_mq_timed{send,receive}
* don't do copy_from_user() twice
* don't mess with allocations in auditsc part
* ... and don't bother checking !audit_enabled and !context in there -
  we'd already checked for audit_dummy_context().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-04 15:14:40 -05:00
Al Viro
20114f71b2 sanitize audit_mq_notify()
* don't copy_from_user() twice
* don't bother with allocations
* don't duplicate parts of audit_dummy_context()
* make it return void

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-04 15:14:40 -05:00
Al Viro
7392906ea9 sanitize audit_mq_getsetattr()
* get rid of allocations
* make it return void
* don't duplicate parts of audit_dummy_context()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-04 15:14:40 -05:00
Al Viro
e816f370cb sanitize audit_ipc_set_perm()
* get rid of allocations
* make it return void
* simplify callers

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-04 15:14:40 -05:00
Al Viro
a33e675100 sanitize audit_ipc_obj()
* get rid of allocations
* make it return void
* simplify callers

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-04 15:14:39 -05:00
Al Viro
f3298dc4f2 sanitize audit_socketcall
* don't bother with allocations
* now that it can't fail, make it return void

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-04 15:14:39 -05:00
Al Viro
4f6b434fee don't reallocate buffer in every audit_sockaddr()
No need to do that more than once per process lifetime; allocating/freeing
on each sendto/accept/etc. is bloody pointless.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-04 15:14:39 -05:00
Mark Brown
3f874b6643 mfd: Fix section mismatch in da903x
The subdevice removal functions are marked __devexit but are referenced
from the error handling path when probing so are needed even when
__devexit functions are removed.

Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 15:31:49 +01:00
Jesper Juhl
52942b6b16 swiotlb: Don't include linux/swiotlb.h twice in lib/swiotlb.c
There's no point in including the linux/swiotlb.h header twice in
lib/swiotlb.c - this patch gets rid of the unneeded include.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-04 12:25:16 +01:00
David Brownell
88e75cc347 mfd: move drivers/i2c/chips/menelaus.c to drivers/mfd
ove the menelaus driver from drivers/i2c/chips to drivers/mfd
since it's more of a multi-function device than anything else,
and since Jean is trying to vanish drivers/i2c/chips ASAP.

One way to think of these chips are as the PMIC family most
used with OMAP2 generation chips.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:44 +01:00
David Brownell
87c13493e6 mfd: move drivers/i2c/chips/tps65010.c to drivers/mfd
Move the tps65010 driver from drivers/i2c/chips to drivers/mfd
since it's more of a multi-function device than anything else,
and since Jean is trying to vanish drivers/i2c/chips ASAP.

One way to think of these chips are as the PMIC family most
used with OMAP1 generation chips.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:43 +01:00
David Brownell
0931a4c6db mfd: dm355evm msp430 driver
Basic MFD framework for the MSP430 microcontroller firmware used
on the dm355evm board:

 - Provides an interface for other drivers: register read/write
   utilities, and register declarations.

 - Directly exports:
     * Many signals through the GPIO framework
         + LEDs
         + SW6 through gpio sysfs
	 + NTSC/nPAL jumper through gpio sysfs
	 + ... more could be added later, e.g. MMC signals
     * Child devices:
	+ LEDs, via leds-gpio child (and default triggers)
	+ RTC, via rtc-dm355evm child device
	+ Buttons and IR control, via dm355evm_keys

 - Supports power-off system call.  Use the reset button to power
   the board back up; the power supply LED will be on, but the
   MSP430 waits to re-activate the regulators.

 - On probe() this:
     * Announces firmware revision
     * Turns off the banked LEDs
     * Exports the resources noted above
     * Hooks the power-off support
     * Muxes tvp5146 -or- imager for video input

Unless the new tvp514x driver (tracked for mainline) is configured,
this assumes that some custom imager driver handles video-in.

This completely ignores the registers reporting the output voltages
on the various power supplies.  Someone could add a hwmon interface
if that seems useful.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:43 +01:00
Mark Brown
4331bb3233 mfd: Add missing break from wm3850-core
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:43 +01:00
Mark Brown
ca23f8c1b0 mfd: Add WM8351 support
The WM8351 is a WM8350 variant. As well as register default changes the
WM8351 has fewer voltage and current regulators than the WM8350.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:42 +01:00
Mark Brown
645524a9c6 mfd: Support configurable numbers of DCDCs and ISINKs on WM8350
Some WM8350 variants have fewer DCDCs and ISINKs. Identify these at
probe and refuse to use the absent DCDCs when running on these chips.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:42 +01:00
Mark Brown
53a0d99b1e mfd: Handle missing WM8350 platform data
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:42 +01:00
Mark Brown
9692063062 mfd: Add WM8352 support
The WM8352 is a variant of the WM8350. Aside from the register defaults
there are no software visible differences to the WM8350.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:42 +01:00
Samuel Ortiz
94964f96a6 mfd: Use irq_to_desc in twl4030 code
The global irq_desc array is soon going to be accessible only with
!CONFIG_SPARSE_IRQ. We should start using the generic irq_to_desc()
routines instead.

Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:42 +01:00
Mike Rapoport
342d765e01 power_supply: Add Dialog DA9030 battery charger driver
Driver for battery charger integrated into Dialog Semiconductor DA9030 PMIC

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:41 +01:00
Mike Rapoport
856f6fd119 mfd: Dialog DA9030 battery charger MFD driver
This patch amends DA903x MFD driver with definitions and methods
needed for battery charger driver.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:41 +01:00
Mark Brown
b8380c1a66 mfd: Register WM8400 codec device
Register a child device for the codec in the WM8400.

Also switch the unregistration of the MFD devices to use the MFD core
since the current code is hand rolling the same thing.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:41 +01:00
Mark Brown
44faac3155 mfd: Pass driver_data onto child devices
The MFD cell structure provides a driver_data field but doesn't pass it
on to the child devices when instantiating them - do that.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:41 +01:00
Samuel Ortiz
6354ab5c63 mfd: Fix twl4030-core.c build error
This is a fix for:

twl4030-core.c:(.text+0x16a797): undefined reference to `clk_get_rate'
twl4030-core.c:(.text+0x16a797): undefined reference to `clk_put'

on x86 and x86_64, as the clock API is not defined on those platforms.

Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:40 +01:00
David Brownell
b73eac7871 mfd: twl4030 regulator bug fixes
This contains two bugfixes to the initial twl4030 regulator
support patch related to USB:

 (a) always overwrite the old list of consumers ... else
     the regulator handles all use the same "usb1v5" name;
 (b) don't set up the "usbcp" regulator, which turns out
     to be managed through separate controls, usually ULPI
     directly from the OTG controller.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:40 +01:00
David Brownell
dad759ff8b mfd: twl4030: create some regulator devices
Initial code to create twl4030 voltage regulator devices, using
the new regulator framework.  Note that this now starts to care
what name is used to declare the TWL chip:

 - TWL4030 is the "old" chip; newer ones have a bigger variety
   of VAUX2 voltages.

 - TWL5030 is the core "new" chip; TPS65950 is its catalog version.

 - The TPS65930 and TPS65920 are cost-reduced catalog versions of
   TWL5030 parts ... fewer regulators, no battery charger, etc.

Board-specific regulator configuration should be provided, listing
which regulators are used and their constraints (e.g. 1.8V only).

Code that could ("should"?) leverage the regulator stuff includes
TWL4030 USB transceiver support and MMC glue, LCD support for the
3430SDP and Labrador boards, and S-Video output.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:39 +01:00