Add a tile method, fb_get_tilemax(), that returns the maximum length of
the tile map (or font map). This is needed by s3fb which can only handle
256 characters.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If tileblitting is enabled (text mode), the hardware can only accept 8x16
bitmaps. Advertise this to the upper layer. And to ensure that an appropriate
font is always available, select an 8x16 font in Kconfig.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Advertise that vga16fb can only handle widths that are 8-pixel-multiple only
(software limitation). To ensure that a legal font is available, SELECT an
8x16 font in Kconfig.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fbcon_set_font() will now check if the new font dimensions can be drawn by the
driver (by checking pixmap.blit_x and blit_y). Similarly, add 2 new
parameters to get_default_font(), font_w and font_h, to further aid in the
font selection process.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A few drivers are not capable of blitting rectangles of any dimension.
vga16fb can only blit 8-pixel wide rectangles, while s3fb (in tileblitting
mode) can only blit 8x16 rectangles. For example, loading a 12x22 font in
vga16fb will result in a corrupt display.
Advertise this limitation/capability in info->pixmap.blit_x and blit_y. These
fields are 32-bit arrays (font max is 32x32 only), ie, if bit 7 is set, then
width/height of 7+1 is supported.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Consolidate common drawing functions into a single header file.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since vfb's framebuffer is vmalloc'ed, use the fb_sys_read() and
fb_sys_write().
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since hecubafb's framebuffer is vmalloc'ed, use fb_sys_read().
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since arcfb's framebuffer is vmalloc'ed, use the fb_sys_read().
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The functions fb_read() and fb_write in fbmem.c assume that the framebuffer
is in IO memory. However, we have 3 drivers (hecubafb, arcfb, and vfb)
where the framebuffer is allocated from system RAM (via vmalloc). Using
__raw_read/__raw_write (fb_readl/fb_writel) for these drivers is
illegal, especially in other platforms.
Create file read and write methods for these types of drivers. These are
named fb_sys_read() and fb_sys_write().
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is unnecessary to pass struct file to fb_read() and fb_write() in struct
fb_ops. For consistency with the other methods, pass struct fb_info instead.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since vfb's framebuffer is vmalloc'ed, use the sys_* drawing functions
instead of cfb_*.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since hecubafb's framebuffer is vmalloc'ed, use the sys_* drawing functions
instead of cfb_*.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since arcfb's framebuffer is vmalloc'ed, use the sys_* drawing functions
instead of cfb_*.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The generic drawing functions (cfbimgblt, cfbcopyarea, cfbfillrect) assume
that the framebuffer is in IO memory. However, we have 3 drivers (hecubafb,
arcfb, and vfb) where the framebuffer is allocated from system RAM (via
vmalloc). Using _raw_read/write and family for these drivers (as used in
the cfb* functions) is illegal, especially in other platforms.
Create 3 new drawing functions, based almost entirely from the original
except that the framebuffer memory is assumed to be in system RAM.
These are named as sysimgblt, syscopyarea, and sysfillrect.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add description to Documentation/kernel-parameters.txt on new options
default_blue, default_grn, default_red, and default_utf8.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a long-standing bug. The mask used to detect a 100Mhz or 133Mhz chipset
is incorrect. (The only side effect of this bug is that it will choose an
incorrect watermark).
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The framebuffer memory is allocated from system RAM (vmalloc'ed). Add __force
annotations.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add sparse annotations and use fb_read/fb_write and family to access the
framebuffer.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The framebuffer memory is allocated from system RAM (vmalloc'ed). Add __force
annotations.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add sparse annotations and use fb_read/fb_write family to access the
framebuffer.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kill the following in fb_defio.c:
drivers/video/fb_defio.c:40:43: warning: incorrect type in argument 1 (different address spaces)
drivers/video/fb_defio.c:40:43: expected void *addr
drivers/video/fb_defio.c:40:43: got char [noderef] *screen_base<asn:2>
The framebuffer memory of these types of devices are allocated from system
RAM.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the current framebuffer console is rotated (rotate != 0), doing an
"fbset -a" will corrupt the current console. Fix by updating the current
console only after all non-visible consoles have been updated.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of directly linking vgastate.o by individual drivers, create a Kconfig
option VGASTATE which can be 'SELECT'ed by individual drivers instead.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow the saving and restoration of VGA text mode. The state is saved on the
first open and restored on the last close. Because of the VGA registers are
linearly mapped to the MMIO space, MMIO access is used which is not limited to
X86 platforms nor to the primary display device.
An echo 0 > /sys/class/vtconsole/vtcon1/bind will convert the display from
graphics to text mode.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use already defined VGAwCR/VGArCR functions to access the i2c bus.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow the saving and restoration of VGA text mode. The state is saved on the
first open and restored on the last close. Because of the non-linear mapping
of the VGA registers to the MMIO space, this will be done only on X86
platforms where the device is the primary display.
An echo 0 > /sys/class/vtconsole/vtcon1/bind will convert the display from
graphics to text mode.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Following the programming advice laid down in the gcc manual, make
sure the case "..." operator has spaces on either side.
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is mainly correction of types, typos and missing characters in the
skeletonfb.c file found while trying to prepare a new fb driver.
[adaplas]
Additions on power management and fixes as per akpm
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use Read/WriteCrtc() to access CRTC registers in nv_i2c.c. These are safer
because it uses the correct CRTC base (0x3bx or 0x3dx).
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Ensure that CRTC registers are accessible by unlocking them on set_par(),
otherwise i2c reading will fail.
- The function nvidia_vga_protect(), does not protect the VGA registers, but
turns off the screen. Rename it to nvidia_screen_off().
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixed reversed DDC port so assignments are congruent with nvidiafb's and X's
nv driver.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Various cleanups to rivafb/nvidiafb's I2C code:
* Drop useless par->bus.
* Refactor I2C bus deletion code.
* Drop useless variable initialization.
* Remove unneeded include of <linux/i2c-id.h>.
* Simplify +1/-1.
* Add __devinit tags where possible.
[adaplas]
The varible initialization are not useless. However, rivafb must
check if i2c bus are created properly before reading the EDID
block.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I2C bus creation may fail, let rivafb handle that case properly.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Let the hardware monitoring drivers probe the second rivafb/nvidiafb I2C bus
for devices.
Signed-off-by: Jean Delvare <khali@linux-fr>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It was always intended for the logo to be drawn only if both fbcon and the
driver that is mapped to it are both compiled statically. Currently, if fbcon
is loaded prior to the driver, the logo is not shown. Reverse the order, and
the code may attempt to draw the logo which is __initdata. By accident, this
bug is rarely seen because this method of loading the modules is not common
and secondly, a code in fb_prepare_logo() that checks the height of the logo
(now a random value) rarely succeeds.
Fix by drawing the logo only if both fbcon and the driver are statically
compiled.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/video/s3fb.c:1078: warning: ignoring return value of 'pci_enable_device', declared with attribute warn_unused_result
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Create a variable, default_utf8, that defines the system-wide default UTF-8
setting. This variable can be altered via sysfs. If the variable is properly
set, this should mimimize breakage of UTF-8 encoded consoles when doing a
reset or echo -e '\033c' and of newly opened/allocated consoles.
This is based from patches by Jan Engelhardt and Paul LeoNerd Evans.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Cc: Paul LeoNerd Evans <leonerd@leonerd.org.uk>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the cursor and echo are disabled on the current console, pressing a
key will cause a black rectangle to be painted in the cursor's position.
Fix this by not touching the framebuffer in fbcon_cursor() when the
cursor is off.
Signed-off-by: Michal Januszewski <spock@gentoo.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/usb/misc/sisusbvga/sisusb_con.c:1436: warning: initialization from incompatible pointer type
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add color support to the "underline" and "italic" attributes as in
OpenBSD/NetBSD-style (vt220) and xterm.
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Acked-by: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow for the palette to be exposed and changed via sysfs. A call to
/usr/bin/reset will slurp the new definitions in for the current console.
Already posted at http://lkml.org/lkml/2006/1/15/149
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After I added some debugging printks I've found that code became a bit
confused because it believed that primary monitor is 1920x540, but later it
found in CRTC0's registers that panel size is 1920x1200 (Windows also agree
that 1920x1200 is primary monitor, and 1920x1080i secondary one).
When I applied attached patch then my monitor became as happy as it was
before I connected HDMI cable to secondary output.
Signed-off-by: Petr Vandrovec <vandrove@vc.cvut.cz>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Added support for radeon xpress 200m(rs480). Note that the card doesn't
like dynclk turned on.
Signed-off-by: Johan Henriksson <jhn98032@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
