It's already duplicated in btrfs and about to be used in overlayfs too.
Move the sticky bit check to an inline helper and call the out-of-line
helper only in the unlikly case of the sticky bit being set.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
We need to be able to check inode permissions (but not filesystem implied
permissions) for stackable filesystems. Expose this interface for overlayfs.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Add a new inode operation i_op->dentry_open(). This is for stacked filesystems
that want to return a struct file from a different filesystem.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Unknown operation numbers are caught in nfsd4_decode_compound() which
sets op->opnum to OP_ILLEGAL and op->status to nfserr_op_illegal. The
error causes the main loop in nfsd4_proc_compound() to skip most
processing. But nfsd4_proc_compound also peeks ahead at the next
operation in one case and doesn't take similar precautions there.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
While the hash function used by the revoke hashtable is good somewhere else,
it's not really good here.
The default hash shift (8) means that one third of the hashing function
gets lost (and is undefined anyways (8 - 12 = negative shift)):
"(block << (hash_shift - 12))) & (table->hash_size - 1)"
Instead, just use the kernel's generic hash function that gets used everywhere
else.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Due to a switched left and right side of an assignment,
dquot_writeback_dquots() never returned error. This could result in
errors during quota writeback to not be reported to userspace properly.
Fix it.
CC: stable@vger.kernel.org
Coverity-id: 1226884
Signed-off-by: Jan Kara <jack@suse.cz>
The check whether quota format is set even though there are no
quota files with journalled quota is pointless and it actually
makes it impossible to turn off journalled quotas (as there's
no way to unset journalled quota format). Just remove the check.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
When quiet_error applies rate limiting to buffer_io_error calls, what the
they apply to is unclear because the name is so generic, particularly
if the messages are interleaved with others:
[ 1936.063572] quiet_error: 664293 callbacks suppressed
[ 1936.065297] Buffer I/O error on dev sdr, logical block 257429952, lost async page write
[ 1936.067814] Buffer I/O error on dev sdr, logical block 257429953, lost async page write
Also, the function uses printk_ratelimit(), although printk.h includes a
comment advising "Please don't use... Instead use printk_ratelimited()."
Change buffer_io_error to check the BH_Quiet bit itself, drop the
printk_ratelimit call, and print using printk_ratelimited.
This makes the messages look like:
[ 387.208839] buffer_io_error: 676394 callbacks suppressed
[ 387.210693] Buffer I/O error on dev sdr, logical block 211291776, lost async page write
[ 387.213432] Buffer I/O error on dev sdr, logical block 211291777, lost async page write
Signed-off-by: Robert Elliott <elliott@hp.com>
Reviewed-by: Webb Scales <webbnh@hp.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
buffer.c uses two printk calls to print these messages:
[67353.422338] Buffer I/O error on device sdr, logical block 212868488
[67353.422338] lost page write due to I/O error on sdr
In a busy system, they may be interleaved with other prints,
losing the context for the second message. Merge them into
one line with one printk call so the prints are atomic.
Also, differentiate between async page writes, sync page writes, and
async page reads.
Also, shorten "device" to "dev" to match the block layer prints:
[67353.467906] blk_update_request: critical target error, dev sdr, sector
1707107328
Also, use %llu rather than %Lu.
Resulting prints look like:
[ 1356.437006] blk_update_request: critical target error, dev sdr, sector 1719693992
[ 1361.383522] quiet_error: 659876 callbacks suppressed
[ 1361.385816] Buffer I/O error on dev sdr, logical block 256902912, lost async page write
[ 1361.385819] Buffer I/O error on dev sdr, logical block 256903644, lost async page write
Signed-off-by: Robert Elliott <elliott@hp.com>
Reviewed-by: Webb Scales <webbnh@hp.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
We added this new estimator function but forgot to hook it up. The
effect is that NFSv4.1 (and greater) won't do zero-copy reads.
The estimate was also wrong by 8 bytes.
Fixes: ccae70a9ee "nfsd4: estimate sequence response size"
Cc: stable@vger.kernel.org
Reported-by: Chuck Lever <chucklever@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
optimizations.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=vWic
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"A large number of cleanups and bug fixes, with some (minor) journal
optimizations"
[ This got sent to me before -rc1, but was stuck in my spam folder. - Linus ]
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (67 commits)
ext4: check s_chksum_driver when looking for bg csum presence
ext4: move error report out of atomic context in ext4_init_block_bitmap()
ext4: Replace open coded mdata csum feature to helper function
ext4: delete useless comments about ext4_move_extents
ext4: fix reservation overflow in ext4_da_write_begin
ext4: add ext4_iget_normal() which is to be used for dir tree lookups
ext4: don't orphan or truncate the boot loader inode
ext4: grab missed write_count for EXT4_IOC_SWAP_BOOT
ext4: optimize block allocation on grow indepth
ext4: get rid of code duplication
ext4: fix over-defensive complaint after journal abort
ext4: fix return value of ext4_do_update_inode
ext4: fix mmap data corruption when blocksize < pagesize
vfs: fix data corruption when blocksize < pagesize for mmaped data
ext4: fold ext4_nojournal_sops into ext4_sops
ext4: support freezing ext2 (nojournal) file systems
ext4: fold ext4_sync_fs_nojournal() into ext4_sync_fs()
ext4: don't check quota format when there are no quota files
jbd2: simplify calling convention around __jbd2_journal_clean_checkpoint_list
jbd2: avoid pointless scanning of checkpoint lists
...
Pull cifs/smb3 updates from Steve French:
"Improved SMB3 support (symlink and device emulation, and remapping by
default the 7 reserved posix characters) and a workaround for cifs
mounts to Mac (working around a commonly encountered Mac server bug)"
* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
[CIFS] Remove obsolete comment
Check minimum response length on query_network_interface
Workaround Mac server problem
Remap reserved posix characters by default (part 3/3)
Allow conversion of characters in Mac remap range (part 2)
Allow conversion of characters in Mac remap range. Part 1
mfsymlinks support for SMB2.1/SMB3. Part 2 query symlink
Add mfsymlinks support for SMB2.1/SMB3. Part 1 create symlink
Allow mknod and mkfifo on SMB2/SMB3 mounts
add defines for two new file attributes
This includes a single commit fixing a missing endian conversion.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=eEi+
-----END PGP SIGNATURE-----
Merge tag 'dlm-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm fix from David Teigland:
"This includes a single commit fixing a missing endian conversion"
* tag 'dlm-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: fix missing endian conversion of rcom_status flags
Pull btrfs data corruption fix from Chris Mason:
"I'm testing a pull with more fixes, but wanted to get this one out so
Greg can pick it up.
The corruption isn't easy to hit, you have to do a readonly snapshot
and have orphans in the snapshot. But my review and testing missed
the bug. Filipe has added a better xfstest to cover it"
* 'for-linus-update' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Revert "Btrfs: race free update of commit root for ro snapshots"
Pull NTFS update from Anton Altaparmakov:
"Here is a small NTFS update notably implementing FIBMAP ioctl for NTFS
by adding the bmap address space operation. People seem to still want
FIBMAP"
* git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs:
NTFS: Bump version to 2.1.31.
NTFS: Add bmap address space operation needed for FIBMAP ioctl.
NTFS: Remove changelog from Documentation/filesystems/ntfs.txt.
NTFS: Split ntfs_aops into ntfs_normal_aops and ntfs_compressed_aops in preparation for them diverging.
Highlights include:
Stable fixes:
- Fix an uninitialised pointer Oops in the writeback error path
- Fix a bogus warning (and early exit from the loop) in nfs_generic_pgio
Features:
- Add NFSv4.2 SEEK feature and client support for lseek(SEEK_HOLE/SEEK_DATA)
Other fixes:
- pnfs: replace broken pnfs_put_lseg_async
- Remove dead prototype for nfs4_insert_deviceid_node
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ekPm
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.18-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable fixes:
- fix an uninitialised pointer Oops in the writeback error path
- fix a bogus warning (and early exit from the loop) in nfs_generic_pgio()
Features:
- Add NFSv4.2 SEEK feature and client support for lseek(SEEK_HOLE/SEEK_DATA)
Other fixes:
- pnfs: replace broken pnfs_put_lseg_async
- Remove dead prototype for nfs4_insert_deviceid_node"
* tag 'nfs-for-3.18-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix a bogus warning in nfs_generic_pgio
NFS: Fix an uninitialised pointer Oops in the writeback error path
NFSv4.1/pnfs: replace broken pnfs_put_lseg_async
NFSv4: Remove dead prototype for nfs4_insert_deviceid_node()
NFS: Implement SEEK
Pull core block layer changes from Jens Axboe:
"This is the core block IO pull request for 3.18. Apart from the new
and improved flush machinery for blk-mq, this is all mostly bug fixes
and cleanups.
- blk-mq timeout updates and fixes from Christoph.
- Removal of REQ_END, also from Christoph. We pass it through the
->queue_rq() hook for blk-mq instead, freeing up one of the request
bits. The space was overly tight on 32-bit, so Martin also killed
REQ_KERNEL since it's no longer used.
- blk integrity updates and fixes from Martin and Gu Zheng.
- Update to the flush machinery for blk-mq from Ming Lei. Now we
have a per hardware context flush request, which both cleans up the
code should scale better for flush intensive workloads on blk-mq.
- Improve the error printing, from Rob Elliott.
- Backing device improvements and cleanups from Tejun.
- Fixup of a misplaced rq_complete() tracepoint from Hannes.
- Make blk_get_request() return error pointers, fixing up issues
where we NULL deref when a device goes bad or missing. From Joe
Lawrence.
- Prep work for drastically reducing the memory consumption of dm
devices from Junichi Nomura. This allows creating clone bio sets
without preallocating a lot of memory.
- Fix a blk-mq hang on certain combinations of queue depths and
hardware queues from me.
- Limit memory consumption for blk-mq devices for crash dump
scenarios and drivers that use crazy high depths (certain SCSI
shared tag setups). We now just use a single queue and limited
depth for that"
* 'for-3.18/core' of git://git.kernel.dk/linux-block: (58 commits)
block: Remove REQ_KERNEL
blk-mq: allocate cpumask on the home node
bio-integrity: remove the needless fail handle of bip_slab creating
block: include func name in __get_request prints
block: make blk_update_request print prefix match ratelimited prefix
blk-merge: don't compute bi_phys_segments from bi_vcnt for cloned bio
block: fix alignment_offset math that assumes io_min is a power-of-2
blk-mq: Make bt_clear_tag() easier to read
blk-mq: fix potential hang if rolling wakeup depth is too high
block: add bioset_create_nobvec()
block: use bio_clone_fast() in blk_rq_prep_clone()
block: misplaced rq_complete tracepoint
sd: Honor block layer integrity handling flags
block: Replace strnicmp with strncasecmp
block: Add T10 Protection Information functions
block: Don't merge requests if integrity flags differ
block: Integrity checksum flag
block: Relocate bio integrity flags
block: Add a disk flag to block integrity profile
block: Add prefix to block integrity profile flags
...
This reverts commit 9c3b306e1c.
Switching only one commit root during a transaction is wrong because it
leads the fs into an inconsistent state. All commit roots should be
switched at once, at transaction commit time, otherwise backref walking
can often miss important references that were only accessible through
the old commit root. Plus, the root item for the snapshot's root wasn't
getting updated and preventing the next transaction commit to do it.
This made several users get into random corruption issues after creation
of readonly snapshots.
A regression test for xfstests will follow soon.
Cc: stable@vger.kernel.org # 3.17
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Mac server returns that they support CIFS Unix Extensions but
doesn't actually support QUERY_FILE_UNIX_BASIC so mount fails.
Workaround this problem by disabling use of Unix CIFS protocol
extensions if server returns an EOPNOTSUPP error on
QUERY_FILE_UNIX_BASIC during mount.
Signed-off-by: Steve French <smfrench@gmail.com>
This is a bigger patch, but its size is mostly due to
a single change for how we check for remapping illegal characters
in file names - a lot of repeated, small changes to
the way callers request converting file names.
The final patch in the series does the following:
1) changes default behavior for cifs to be more intuitive.
Currently we do not map by default to seven reserved characters,
ie those valid in POSIX but not in NTFS/CIFS/SMB3/Windows,
unless a mount option (mapchars) is specified. Change this
to by default always map and map using the SFM maping
(like the Mac uses) unless the server negotiates the CIFS Unix
Extensions (like Samba does when mounting with the cifs protocol)
when the remapping of the characters is unnecessary. This should
help SMB3 mounts in particular since Samba will likely be
able to implement this mapping with its new "vfs_fruit" module
as it will be doing for the Mac.
2) if the user specifies the existing "mapchars" mount option then
use the "SFU" (Microsoft Services for Unix, SUA) style mapping of
the seven characters instead.
3) if the user specifies "nomapposix" then disable SFM/MAC style mapping
(so no character remapping would be used unless the user specifies
"mapchars" on mount as well, as above).
4) change all the places in the code that check for the superblock
flag on the mount which is set by mapchars and passed in on all
path based operation and change it to use a small function call
instead to set the mapping type properly (and check for the
mapping type in the cifs unicode functions)
Signed-off-by: Steve French <smfrench@gmail.com>
The previous patch allowed remapping reserved characters from directory
listenings, this patch adds conversion the other direction, allowing
opening of files with any of the seven reserved characters.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
This allows directory listings to Mac to display filenames
correctly which have been created with illegal (to Windows)
characters in their filename. It does not allow
converting the other direction yet ie opening files with
these characters (followon patch).
There are seven reserved characters that need to be remapped when
mounting to Windows, Mac (or any server without Unix Extensions) which
are valid in POSIX but not in the other OS.
: \ < > ? * |
We used the normal UCS-2 remap range for this in order to convert this
to/from UTF8 as did Windows Services for Unix (basically add 0xF000 to
any of the 7 reserved characters), at least when the "mapchars" mount
option was specified.
Mac used a very slightly different "Services for Mac" remap range
0xF021 through 0xF027. The attached patch allows cifs.ko (the kernel
client) to read directories on macs containing files with these
characters and display their names properly. In theory this even
might be useful on mounts to Samba when the vfs_catia or new
"vfs_fruit" module is loaded.
Currently the 7 reserved characters look very strange in directory
listings from cifs.ko to Mac server. This patch allows these file
name characters to be read (requires specifying mapchars on mount).
Two additional changes are needed:
1) Make it more automatic: a way of detecting enough info so that
we know to try to always remap these characters or not. Various
have suggested that the SFM approach be made the default when
the server does not support POSIX Unix extensions (cifs mounts
to Samba for example) so need to make SFM remapping the default
unless mapchars (SFU style mapping) specified on mount or no
mapping explicitly requested or no mapping needed (cifs mounts to Samba).
2) Adding a patch to map the characters the other direction
(ie UTF-8 to UCS-2 on open). This patch does it for translating
readdir entries (ie UCS-2 to UTF-8)
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Adds support on SMB2.1 and SMB3 mounts for emulation of symlinks
via the "Minshall/French" symlink format already used for cifs
mounts when mfsymlinks mount option is used (and also used by Apple).
http://wiki.samba.org/index.php/UNIX_Extensions#Minshall.2BFrench_symlinks
This second patch adds support to query them (recognize them as symlinks
and read them). Third version of patch makes minor corrections
to error handling.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Adds support on SMB2.1 and SMB3 mounts for emulation of symlinks
via the "Minshall/French" symlink format already used for cifs
mounts when mfsymlinks mount option is used (and also used by Apple).
http://wiki.samba.org/index.php/UNIX_Extensions#Minshall.2BFrench_symlinks
This first patch adds support to create them. The next patch will
add support for recognizing them and reading them. Although CIFS/SMB3
have other types of symlinks, in the many use cases they aren't
practical (e.g. either require cifs only mounts with unix extensions
to Samba, or require the user to be Administrator to Windows for SMB3).
This also helps enable running additional xfstests over SMB3 (since some
xfstests directly or indirectly require symlink support).
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stefan Metzmacher <metze@samba.org>
The "sfu" mount option did not work on SMB2/SMB3 mounts.
With these changes when the "sfu" mount option is passed in
on an smb2/smb2.1/smb3 mount the client can emulate (and
recognize) fifo and device (character and device files).
In addition the "sfu" mount option should not conflict
with "mfsymlinks" (symlink emulation) as we will never
create "sfu" style symlinks, but using "sfu" mount option
will allow us to recognize existing symlinks, created with
Microsoft "Services for Unix" (SFU and SUA).
To enable the "sfu" mount option for SMB2/SMB3 the calling
syntax of the generic cifs/smb2/smb3 sync_read and sync_write
protocol dependent function needed to be changed (we
don't have a file struct in all cases), but this actually
ended up simplifying the code a little.
Signed-off-by: Steve French <smfrench@gmail.com>
Pull percpu consistent-ops changes from Tejun Heo:
"Way back, before the current percpu allocator was implemented, static
and dynamic percpu memory areas were allocated and handled separately
and had their own accessors. The distinction has been gone for many
years now; however, the now duplicate two sets of accessors remained
with the pointer based ones - this_cpu_*() - evolving various other
operations over time. During the process, we also accumulated other
inconsistent operations.
This pull request contains Christoph's patches to clean up the
duplicate accessor situation. __get_cpu_var() uses are replaced with
with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr().
Unfortunately, the former sometimes is tricky thanks to C being a bit
messy with the distinction between lvalues and pointers, which led to
a rather ugly solution for cpumask_var_t involving the introduction of
this_cpu_cpumask_var_ptr().
This converts most of the uses but not all. Christoph will follow up
with the remaining conversions in this merge window and hopefully
remove the obsolete accessors"
* 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits)
irqchip: Properly fetch the per cpu offset
percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix
ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write.
percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t
Revert "powerpc: Replace __get_cpu_var uses"
percpu: Remove __this_cpu_ptr
clocksource: Replace __this_cpu_ptr with raw_cpu_ptr
sparc: Replace __get_cpu_var uses
avr32: Replace __get_cpu_var with __this_cpu_write
blackfin: Replace __get_cpu_var uses
tile: Use this_cpu_ptr() for hardware counters
tile: Replace __get_cpu_var uses
powerpc: Replace __get_cpu_var uses
alpha: Replace __get_cpu_var
ia64: Replace __get_cpu_var uses
s390: cio driver &__get_cpu_var replacements
s390: Replace __get_cpu_var uses
mips: Replace __get_cpu_var uses
MIPS: Replace __get_cpu_var uses in FPU emulator.
arm: Replace __this_cpu_ptr with raw_cpu_ptr
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zJyI
-----END PGP SIGNATURE-----
Merge tag 'llvmlinux-for-v3.18' of git://git.linuxfoundation.org/llvmlinux/kernel
Pull LLVM updates from Behan Webster:
"These patches remove the use of VLAIS using a new SHASH_DESC_ON_STACK
macro.
Some of the previously accepted VLAIS removal patches haven't used
this macro. I will push new patches to consistently use this macro in
all those older cases for 3.19"
[ More LLVM patches coming in through subsystem trees, and LLVM itself
needs some fixes that are already in many distributions but not in
released versions of LLVM. Some day this will all "just work" - Linus ]
* tag 'llvmlinux-for-v3.18' of git://git.linuxfoundation.org/llvmlinux/kernel:
crypto: LLVMLinux: Remove VLAIS usage from crypto/testmgr.c
security, crypto: LLVMLinux: Remove VLAIS from ima_crypto.c
crypto: LLVMLinux: Remove VLAIS usage from libcrc32c.c
crypto: LLVMLinux: Remove VLAIS usage from crypto/hmac.c
crypto, dm: LLVMLinux: Remove VLAIS usage from dm-crypt
crypto: LLVMLinux: Remove VLAIS from crypto/.../qat_algs.c
crypto: LLVMLinux: Remove VLAIS from crypto/omap_sham.c
crypto: LLVMLinux: Remove VLAIS from crypto/n2_core.c
crypto: LLVMLinux: Remove VLAIS from crypto/mv_cesa.c
crypto: LLVMLinux: Remove VLAIS from crypto/ccp/ccp-crypto-sha.c
btrfs: LLVMLinux: Remove VLAIS
crypto: LLVMLinux: Add macro to remove use of VLAIS in crypto code
Pull Ceph updates from Sage Weil:
"There is the long-awaited discard support for RBD (Guangliang Zhao,
Josh Durgin), a pile of RBD bug fixes that didn't belong in late -rc's
(Ilya Dryomov, Li RongQing), a pile of fs/ceph bug fixes and
performance and debugging improvements (Yan, Zheng, John Spray), and a
smattering of cleanups (Chao Yu, Fabian Frederick, Joe Perches)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (40 commits)
ceph: fix divide-by-zero in __validate_layout()
rbd: rbd workqueues need a resque worker
libceph: ceph-msgr workqueue needs a resque worker
ceph: fix bool assignments
libceph: separate multiple ops with commas in debugfs output
libceph: sync osd op definitions in rados.h
libceph: remove redundant declaration
ceph: additional debugfs output
ceph: export ceph_session_state_name function
ceph: include the initial ACL in create/mkdir/mknod MDS requests
ceph: use pagelist to present MDS request data
libceph: reference counting pagelist
ceph: fix llistxattr on symlink
ceph: send client metadata to MDS
ceph: remove redundant code for max file size verification
ceph: remove redundant io_iter_advance()
ceph: move ceph_find_inode() outside the s_mutex
ceph: request xattrs if xattr_version is zero
rbd: set the remaining discard properties to enable support
rbd: use helpers to handle discard for layered images correctly
...
Pull pivot_root() fix from Andy Lutomirski.
Prevent a leak of unreachable mounts.
* 'CVE-2014-7970' of git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux:
mnt: Prevent pivot_root from creating a loop in the mount tree
Andy Lutomirski recently demonstrated that when chroot is used to set
the root path below the path for the new ``root'' passed to pivot_root
the pivot_root system call succeeds and leaks mounts.
In examining the code I see that starting with a new root that is
below the current root in the mount tree will result in a loop in the
mount tree after the mounts are detached and then reattached to one
another. Resulting in all kinds of ugliness including a leak of that
mounts involved in the leak of the mount loop.
Prevent this problem by ensuring that the new mount is reachable from
the current root of the mount tree.
[Added stable cc. Fixes CVE-2014-7970. --Andy]
Cc: stable@vger.kernel.org
Reported-by: Andy Lutomirski <luto@amacapital.net>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/87bnpmihks.fsf@x220.int.ebiederm.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
The flags are already converted to le when being sent,
but are not being converted back to cpu when received.
Signed-off-by: Neale Ferguson <neale@sinenomine.net>
Signed-off-by: David Teigland <teigland@redhat.com>
Fix some coccinelle warnings:
fs/ceph/caps.c:2400:6-10: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2401:6-15: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2402:6-17: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2403:6-22: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2404:6-22: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2405:6-19: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2440:4-20: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2469:3-16: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2490:2-18: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2519:3-7: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2549:3-12: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2575:2-6: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2589:3-7: WARNING: Assignment of bool to 0/1
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Current code set new file/directory's initial ACL in a non-atomic
manner.
Client first sends request to MDS to create new file/directory, then set
the initial ACL after the new file/directory is successfully created.
The fix is include the initial ACL in create/mkdir/mknod MDS requests.
So MDS can handle creating file/directory and setting the initial ACL in
one request.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Current code uses page array to present MDS request data. Pages in the
array are allocated/freed by caller of ceph_mdsc_do_request(). If request
is interrupted, the pages can be freed while they are still being used by
the request message.
The fix is use pagelist to present MDS request data. Pagelist is
reference counted.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
this allow pagelist to present data that may be sent multiple times.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Implement version 2 of CEPH_MSG_CLIENT_SESSION syntax,
which includes additional client metadata to allow
the MDS to report on clients by user-sensible names
like hostname.
Signed-off-by: John Spray <john.spray@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Both ceph_update_writeable_page and ceph_setattr will verify file size
with max size ceph supported.
There are two caller for ceph_update_writeable_page, ceph_write_begin and
ceph_page_mkwrite. For ceph_write_begin, we have already verified the size in
generic_write_checks of ceph_write_iter; for ceph_page_mkwrite, we have no
chance to change file size when mmap. Likewise we have already verified the size
in inode_change_ok when we call ceph_setattr.
So let's remove the redundant code for max file size verification.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
ceph_find_inode() may wait on freeing inode, using it inside the s_mutex
may cause deadlock. (the freeing inode is waiting for OSD read reply, but
dispatch thread is blocked by the s_mutex)
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Following sequence of events can happen.
- Client releases an inode, queues cap release message.
- A 'lookup' reply brings the same inode back, but the reply
doesn't contain xattrs because MDS didn't receive the cap release
message and thought client already has up-to-data xattrs.
The fix is force sending a getattr request to MDS if xattrs_version
is 0. The getattr mask is set to CEPH_STAT_CAP_XATTR, so MDS knows client
does not have xattr.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
we may corrupt waiting list if a request in the waiting list is kicked.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
So the recovering MDS does not need to fetch these ununsed inodes during
cache rejoin. This may reduce MDS recovery time.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
REQ_KERNEL is no longer used. Remove it and drop the redundant uio
argument to nfs_file_direct_{read,write}.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Replaced the use of a Variable Length Array In Struct (VLAIS) with a C99
compliant equivalent. This patch instead allocates the appropriate amount of
memory using a char array using the SHASH_DESC_ON_STACK macro.
The new code can be compiled with both gcc and clang.
Signed-off-by: Vinícius Tinti <viniciustinti@gmail.com>
Reviewed-by: Jan-Simon Möller <dl9pf@gmx.de>
Reviewed-by: Mark Charlebois <charlebm@gmail.com>
Signed-off-by: Behan Webster <behanw@converseincode.com>
Acked-by: Chris Mason <clm@fb.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=RtLr
-----END PGP SIGNATURE-----
Merge tag 'fscache-fixes-20141013' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull fs-cache fixes from David Howells:
"Two fixes for bugs in CacheFiles and a cleanup in FS-Cache"
* tag 'fscache-fixes-20141013' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
fs/fscache/object-list.c: use __seq_open_private()
CacheFiles: Fix incorrect test for in-memory object collision
CacheFiles: Handle object being killed before being set up
UBIFS is unable to mount a file-system (Hujianyang)
* Few fixes for the ubiblock sybsystem, error path fixes
* The ubiblock subsystem has had the volume size change handling improved
* Few fixes and nicifications in the fastmap subsystem
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2XCN
-----END PGP SIGNATURE-----
Merge tag 'upstream-3.18-rc1-v2' of git://git.infradead.org/linux-ubifs
Pull UBI/UBIFS fixes from Artem Bityutskiy:
- fix for a theoretical race condition which could lead to a situation
when UBIFS is unable to mount a file-system (Hujianyang)
- a few fixes for the ubiblock sybsystem, error path fixes
- the ubiblock subsystem has had the volume size change handling
improved
- a few fixes and nicifications in the fastmap subsystem
* tag 'upstream-3.18-rc1-v2' of git://git.infradead.org/linux-ubifs:
UBI: Fastmap: Calc fastmap size correctly
UBIFS: Fix trivial typo in power_cut_emulated()
UBI: Fix trivial typo in __schedule_ubi_work
UBI: wl: Rename cancel flag to shutdown
UBI: ubi_eba_read_leb: Remove in vain variable assignment
UBIFS: Align the dump messages of SB_NODE
UBI: Fix livelock in produce_free_peb()
UBI: return on error in rename_volumes()
UBI: Improve comment on work_sem
UBIFS: Remove bogus assert
UBI: Dispatch update notification if the volume is updated
UBI: block: Add support for the UBI_VOLUME_UPDATED notification
UBI: block: Fix block device size setting
UBI: block: fix dereference on uninitialized dev
UBI: add missing kmem_cache_free() in process_pool_aeb error path
UBIFS: fix free log space calculation
UBIFS: fix a race condition
Convert the ext4_has_group_desc_csum predicate to look for a checksum
driver instead of the metadata_csum flag and change the bg checksum
calculation function to look for GDT_CSUM before taking the crc16
path.
Without this patch, if we mount with ^uninit_bg,^metadata_csum and
later metadata_csum gets turned on by accident, the block group
checksum functions will incorrectly assume that checksumming is
enabled (metadata_csum) but that crc16 should be used
(!s_chksum_driver). This is totally wrong, so fix the predicate
and the checksum formula selection.
(Granted, if the metadata_csum feature bit gets enabled on a live FS
then something underhanded is going on, but we could at least avoid
writing garbage into the on-disk fields.)
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: stable@vger.kernel.org
Pull do_umount fix from Andy Lutomirski:
"This fix really ought to be safe. Inside a mountns owned by a
non-root user namespace, the namespace root almost always has
MNT_LOCKED set (if it doesn't, then there's a bug, because rootfs
could be exposed). In that case, calling umount on "/" will return
-EINVAL with or without this patch.
Outside a userns, this patch will have no effect. may_mount, required
by umount, already checks
ns_capable(current->nsproxy->mnt_ns->user_ns, CAP_SYS_ADMIN)
so an additional capable(CAP_SYS_ADMIN) check will have no effect.
That leaves anything that calls umount on "/" in a non-root userns
while chrooted. This is the case that is currently broken (it
remounts ro, which shouldn't be allowed) and that my patch changes to
-EPERM. If anything relies on *that*, I'd be surprised"
* 'CVE-2014-7975' of git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux:
fs: Add a missing permission check to do_umount
For VMAs that don't want write notifications, PTEs created for read faults
have their write bit set. If the read fault happens after VM_SOFTDIRTY is
cleared, then the PTE's softdirty bit will remain clear after subsequent
writes.
Here's a simple code snippet to demonstrate the bug:
char* m = mmap(NULL, getpagesize(), PROT_READ | PROT_WRITE,
MAP_ANONYMOUS | MAP_SHARED, -1, 0);
system("echo 4 > /proc/$PPID/clear_refs"); /* clear VM_SOFTDIRTY */
assert(*m == '\0'); /* new PTE allows write access */
assert(!soft_dirty(x));
*m = 'x'; /* should dirty the page */
assert(soft_dirty(x)); /* fails */
With this patch, write notifications are enabled when VM_SOFTDIRTY is
cleared. Furthermore, to avoid unnecessary faults, write notifications
are disabled when VM_SOFTDIRTY is set.
As a side effect of enabling and disabling write notifications with
care, this patch fixes a bug in mprotect where vm_page_prot bits set by
drivers were zapped on mprotect. An analogous bug was fixed in mmap by
commit c9d0bf2414 ("mm: uncached vma support with writenotify").
Signed-off-by: Peter Feiner <pfeiner@google.com>
Reported-by: Peter Feiner <pfeiner@google.com>
Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Jamie Liu <jamieliu@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's very common for the buffer heads in the lru to have different block
numbers. By comparing the blocknr before the bdev and size we can
reduce the cost of searching in the very common case where all the
entries have the same bdev and size.
In quick hot cache cycle counting tests on a single fs workstation this
cut the cost of a miss by about 20%.
A diff of the disassembly shows the reordering of the bdev and blocknr
comparisons. This is in such a tiny loop that skipping one comparison
is a meaningful portion of the total work being done:
1628: 83 c1 01 add $0x1,%ecx
162b: 83 f9 08 cmp $0x8,%ecx
162e: 74 60 je 1690 <__find_get_block+0xa0>
1630: 89 c8 mov %ecx,%eax
1632: 65 4c 8b 04 c5 00 00 mov %gs:0x0(,%rax,8),%r8
1639: 00 00
163b: 4d 85 c0 test %r8,%r8
163e: 4c 89 c3 mov %r8,%rbx
1641: 74 e5 je 1628 <__find_get_block+0x38>
- 1643: 4d 3b 68 30 cmp 0x30(%r8),%r13
+ 1643: 4d 3b 68 18 cmp 0x18(%r8),%r13
1647: 75 df jne 1628 <__find_get_block+0x38>
- 1649: 4d 3b 60 18 cmp 0x18(%r8),%r12
+ 1649: 4d 3b 60 30 cmp 0x30(%r8),%r12
164d: 75 d9 jne 1628 <__find_get_block+0x38>
164f: 49 39 50 20 cmp %rdx,0x20(%r8)
1653: 75 d3 jne 1628 <__find_get_block+0x38>
Signed-off-by: Zach Brown <zab@zabbo.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kernel used to contain two functions for length-delimited,
case-insensitive string comparison, strnicmp with correct semantics and
a slightly buggy strncasecmp. The latter is the POSIX name, so strnicmp
was renamed to strncasecmp, and strnicmp made into a wrapper for the new
strncasecmp to avoid breaking existing users.
To allow the compat wrapper strnicmp to be removed at some point in the
future, and to avoid the extra indirection cost, do
s/strnicmp/strncasecmp/g.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kernel used to contain two functions for length-delimited,
case-insensitive string comparison, strnicmp with correct semantics and
a slightly buggy strncasecmp. The latter is the POSIX name, so strnicmp
was renamed to strncasecmp, and strnicmp made into a wrapper for the new
strncasecmp to avoid breaking existing users.
To allow the compat wrapper strnicmp to be removed at some point in the
future, and to avoid the extra indirection cost, do
s/strnicmp/strncasecmp/g.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kernel used to contain two functions for length-delimited,
case-insensitive string comparison, strnicmp with correct semantics and
a slightly buggy strncasecmp. The latter is the POSIX name, so strnicmp
was renamed to strncasecmp, and strnicmp made into a wrapper for the new
strncasecmp to avoid breaking existing users.
To allow the compat wrapper strnicmp to be removed at some point in the
future, and to avoid the extra indirection cost, do
s/strnicmp/strncasecmp/g.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Steve French <sfrench@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch defines maximum block number to 2^31. It also converts
bitmap_size and array_size to unsigned int in omfs_get_imap
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Bob Copeland <me@bobcopeland.com>
Acked-by: Bob Copeland <me@bobcopeland.com>
Tested-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sys_tz is already declared in include/linux/time.h
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Four functions declared variables twice resulting in shadow warnings.
This patch renames internal variables and adds blank line after
declarations.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
head is set to AFFS_HEAD(bh) but never used.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
key is set in affs_fill_super but never used.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
format_corename() can only pass the leader's pid to the core handler,
but there is no simple way to figure out which thread originated the
coredump.
As Jan explains, this also means that there is no simple way to create
the backtrace of the crashed process:
As programs are mostly compiled with implicit gcc -fomit-frame-pointer
one needs program's .eh_frame section (equivalently PT_GNU_EH_FRAME
segment) or .debug_frame section. .debug_frame usually is present only
in separate debug info files usually not even installed on the system.
While .eh_frame is a part of the executable/library (and it is even
always mapped for C++ exceptions unwinding) it no longer has to be
present anywhere on the disk as the program could be upgraded in the
meantime and the running instance has its executable file already
unlinked from disk.
One possibility is to echo 0x3f >/proc/*/coredump_filter and dump all
the file-backed memory including the executable's .eh_frame section.
But that can create huge core files, for example even due to mmapped
data files.
Other possibility would be to read .eh_frame from /proc/PID/mem at the
core_pattern handler time of the core dump. For the backtrace one needs
to read the register state first which can be done from core_pattern
handler:
ptrace(PTRACE_SEIZE, tid, 0, PTRACE_O_TRACEEXIT)
close(0); // close pipe fd to resume the sleeping dumper
waitpid(); // should report EXIT
PTRACE_GETREGS or other requests
The remaining problem is how to get the 'tid' value of the crashed
thread. It could be read from the first NT_PRSTATUS note of the core
file but that makes the core_pattern handler complicated.
Unfortunately %t is already used so this patch uses %i/%I.
Automatic Bug Reporting Tool (https://github.com/abrt/abrt/wiki/overview)
is experimenting with this. It is using the elfutils
(https://fedorahosted.org/elfutils/) unwinder for generating the
backtraces. Apart from not needing matching executables as mentioned
above, another advantage is that we can get the backtrace without saving
the core (which might be quite large) to disk.
[mmilata@redhat.com: final paragraph of changelog]
Signed-off-by: Jan Kratochvil <jan.kratochvil@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Mark Wielaard <mjw@redhat.com>
Cc: Martin Milata <mmilata@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge conditional unlock/lock in the same condition to avoid sparse
warning:
fs/reiserfs/journal.c:703:36: warning: context imbalance in 'add_to_chunk' - unexpected unlock
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ucg is defined and set in ufs_bitmap_search but never used.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sys_tz is already declared in include/linux/time.h
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Support for fdatasync() has been implemented in NILFS2 for a long time,
but whenever the corresponding inode is dirty the implementation falls
back to a full-flegded sync(). Since every write operation has to
update the modification time of the file, the inode will almost always
be dirty and fdatasync() will fall back to sync() most of the time. But
this fallback is only necessary for a change of the file size and not
for a change of the various timestamps.
This patch adds a new flag NILFS_I_INODE_SYNC to differentiate between
those two situations.
* If it is set the file size was changed and a full sync is necessary.
* If it is not set then only the timestamps were updated and
fdatasync() can go ahead.
There is already a similar flag I_DIRTY_DATASYNC on the VFS layer with
the exact same semantics. Unfortunately it cannot be used directly,
because NILFS2 doesn't implement write_inode() and doesn't clear the VFS
flags when inodes are written out. So the VFS writeback thread can
clear I_DIRTY_DATASYNC at any time without notifying NILFS2. So
I_DIRTY_DATASYNC has to be mapped onto NILFS_I_INODE_SYNC in
nilfs_update_inode().
Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Under normal circumstances nilfs_sync_fs() writes out the super block,
which causes a flush of the underlying block device. But this depends
on the THE_NILFS_SB_DIRTY flag, which is only set if the pointer to the
last segment crosses a segment boundary. So if only a small amount of
data is written before the call to nilfs_sync_fs(), no flush of the
block device occurs.
In the above case an additional call to blkdev_issue_flush() is needed.
To prevent unnecessary overhead, the new flag nilfs->ns_flushed_device
is introduced, which is cleared whenever new logs are written and set
whenever the block device is flushed. For convenience the function
nilfs_flush_device() is added, which contains the above logic.
Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If rcu-walk mode we don't *have* to return -EISDIR for non-mount-traps
as we will simply drop into REF-walk and handling DCACHE_NEED_AUTOMOUNT
dentrys the slow way. But it is better if we do when possible.
In 'oz_mode', use the same condition as ref-walk: if not a mountpoint,
then it must be -EISDIR.
In regular mode there are most tests needed. Most of them can be
performed without taking any spinlocks. If we find a directory that
isn't obviously empty, and isn't mounted on, we need to call
'simple_empty()' which does take a spinlock. If this turned out to hurt
performance, some other approach could be found to signal when a
directory is known to be empty.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Ian Kent <raven@themaw.net>
Tested-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
->fs_lock protects AUTOFS_INF_EXPIRING. We need to be sure that once
the flag is set, no new references beneath the dentry are taken. So
rcu-walk currently needs to take fs_lock before checking the flag. This
hurts performance.
Change the expiry to a two-stage process. First set AUTOFS_INF_NO_RCU
which forces any path walk into ref-walk mode, then drop the lock and
call synchronize_rcu(). Once that returns we can be sure no rcu-walk is
active beneath the dentry and we can check reference counts again.
Now during an RCU-walk we can test AUTOFS_INF_EXPIRING without taking
the lock as along as we test AUTOFS_INF_NO_RCU too. If either are set,
we must abort the RCU-walk If neither are set, we know that refcounts
will be tested again after we finish the RCU-walk so we are safe to
continue.
->fs_lock is still taken in d_manage() to check for a non-trap
directory. That will be resolved in the next patch.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Ian Kent <raven@themaw.net>
Tested-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Have a "test" function change the value it is testing can be confusing,
particularly as a future patch will be calling this function twice.
So move the update for 'last_used' to avoid repeat expiry to the place
where the final determination on what to expire is known.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Ian Kent <raven@themaw.net>
Tested-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Future patch will potentially call this twice, so make it separate.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Ian Kent <raven@themaw.net>
Tested-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This series teaches autofs about RCU-walk so that we don't drop straight
into REF-walk when we hit an autofs directory, and so that we avoid
spinlocks as much as possible when performing an RCU-walk.
This is needed so that the benefits of the recent NFS support for
RCU-walk are fully available when NFS filesystems are automounted.
Patches have been carefully reviewed and tested both with test suites
and in production - thanks a lot to Ian Kent for his support there.
This patch (of 6):
Any attempt to look up a pathname that passes though an autofs4 mount is
currently forced out of RCU-walk into REF-walk.
This can significantly hurt performance of many-thread work loads on
many-core systems, especially if the automounted filesystem supports
RCU-walk but doesn't get to benefit from it.
So if autofs4_d_manage is called with rcu_walk set, only fail with -ECHILD
if it is necessary to wait longer than a spinlock.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Ian Kent <raven@themaw.net>
Tested-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sys_tz is already declared in include/linux/time.h
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gcc-4.9 on ARM gives us a mysterious warning about the binfmt_misc
parse_command function:
fs/binfmt_misc.c: In function 'parse_command.part.3':
fs/binfmt_misc.c:405:7: warning: array subscript is above array bounds [-Warray-bounds]
I've managed to trace this back to the ARM implementation of memset,
which is called from copy_from_user in case of a fault and which does
#define memset(p,v,n) \
({ \
void *__p = (p); size_t __n = n; \
if ((__n) != 0) { \
if (__builtin_constant_p((v)) && (v) == 0) \
__memzero((__p),(__n)); \
else \
memset((__p),(v),(__n)); \
} \
(__p); \
})
Apparently gcc gets confused by the check for "size != 0" and believes
that the size might be zero when it gets to the line that does "if
(s[count-1] == '\n')", so it would access data outside of the array.
gcc is clearly wrong here, since this condition was already checked
earlier in the function and the 'size' value can not change in the
meantime.
Fortunately, we can work around it and get rid of the warning by
rearranging the function to check for zero size after doing the
copy_from_user. It is still safe to pass a zero size into
copy_from_user, so it does not cause any side effects.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current code places a 256 byte limit on the registration format.
This ends up being fairly limited when you try to do matching against a
binary format like ELF:
- the magic & mask formats cannot have any embedded NUL chars
(string_unescape_inplace halts at the first NUL)
- each escape sequence quadruples the size: \x00 is needed for NUL
- trying to match bytes at the start of the file as well as further
on leads to a lot of \x00 sequences in the mask
- magic & mask have to be the same length (when decoded)
- still need bytes for the other fields
- impossible!
Let's look at a concrete (and common) example: using QEMU to run MIPS
ELFs. The name field uses 11 bytes "qemu-mipsel". The interp uses 20
bytes "/usr/bin/qemu-mipsel". The type & flags takes up 4 bytes. We
need 7 bytes for the delimiter (usually ":"). We can skip offset. So
already we're down to 107 bytes to use with the magic/mask instead of
the real limit of 128 (BINPRM_BUF_SIZE). If people use shell code to
register (which they do the majority of the time), they're down to ~26
possible bytes since the escape sequence must be \x##.
The ELF format looks like (both 32 & 64 bit):
e_ident: 16 bytes
e_type: 2 bytes
e_machine: 2 bytes
Those 20 bytes are enough for most architectures because they have so few
formats in the first place, thus they can be uniquely identified. That
also means for shell users, since 20 is smaller than 26, they can sanely
register a handler.
But for some targets (like MIPS), we need to poke further. The ELF fields
continue on:
e_entry: 4 or 8 bytes
e_phoff: 4 or 8 bytes
e_shoff: 4 or 8 bytes
e_flags: 4 bytes
We only care about e_flags here as that includes the bits to identify
whether the ELF is O32/N32/N64. But now we have to consume another 16
bytes (for 32 bit ELFs) or 28 bytes (for 64 bit ELFs) just to match the
flags. If every byte is escaped, we send 288 more bytes to the kernel
((20 {e_ident,e_type,e_machine} + 12 {e_entry,e_phoff,e_shoff} + 4
{e_flags}) * 2 {mask,magic} * 4 {escape}) and we've clearly blown our
budget.
Even if we try to be clever and do the decoding ourselves (rather than
relying on the kernel to process \x##), we still can't hit the mark --
string_unescape_inplace treats mask & magic as C strings so NUL cannot
be embedded. That leaves us with having to pass \x00 for the 12/24
entry/phoff/shoff bytes (as those will be completely random addresses),
and that is a minimum requirement of 48/96 bytes for the mask alone.
Add up the rest and we blow through it (this is for 64 bit ELFs):
magic: 20 {e_ident,e_type,e_machine} + 24 {e_entry,e_phoff,e_shoff} +
4 {e_flags} = 48 # ^^ See note below.
mask: 20 {e_ident,e_type,e_machine} + 96 {e_entry,e_phoff,e_shoff} +
4 {e_flags} = 120
Remember above we had 107 left over, and now we're at 168. This is of
course the *best* case scenario -- you'll also want to have NUL bytes
in the magic & mask too to match literal zeros.
Note: the reason we can use 24 in the magic is that we can work off of the
fact that for bytes the mask would clobber, we can stuff any value into
magic that we want. So when mask is \x00, we don't need the magic to also
be \x00, it can be an unescaped raw byte like '!'. This lets us handle
more formats (barely) under the current 256 limit, but that's a pretty
tall hoop to force people to jump through.
With all that said, let's bump the limit from 256 bytes to 1920. This way
we support escaping every byte of the mask & magic field (which is 1024
bytes by themselves -- 128 * 4 * 2), and we leave plenty of room for other
fields. Like long paths to the interpreter (when you have source in your
/really/long/homedir/qemu/foo). Since the current code stuffs more than
one structure into the same buffer, we leave a bit of space to easily
round up to 2k. 1920 is just as arbitrary as 256 ;).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reduce boilerplate code by using __seq_open_private() instead of seq_open()
in fscache_objlist_open().
Signed-off-by: Rob Jones <rob.jones@codethink.co.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
When CacheFiles cache objects are in use, they have in-memory representations,
as defined by the cachefiles_object struct. These are kept in a tree rooted in
the cache and indexed by dentry pointer (since there's a unique mapping between
object index key and dentry).
Collisions can occur between a representation already in the tree and a new
representation being set up because it takes time to dispose of an old
representation - particularly if it must be unlinked or renamed.
When such a collision occurs, cachefiles_mark_object_active() is meant to check
to see if the old, already-present representation is in the process of being
discarded (ie. FSCACHE_OBJECT_IS_LIVE is not set on it) - and, if so, wait for
the representation to be removed (ie. CACHEFILES_OBJECT_ACTIVE is then
cleared).
However, the test for whether the old representation is still live is checking
the new object - which always will be live at this point. This leads to an
oops looking like:
CacheFiles: Error: Unexpected object collision
object: OBJ1b354
objstate=LOOK_UP_OBJECT fl=8 wbusy=2 ev=0[0]
ops=0 inp=0 exc=0
parent=ffff88053f5417c0
cookie=ffff880538f202a0 [pr=ffff8805381b7160 nd=ffff880509c6eb78 fl=27]
key=[8] '2490000000000000'
xobject: OBJ1a600
xobjstate=DROP_OBJECT fl=70 wbusy=2 ev=0[0]
xops=0 inp=0 exc=0
xparent=ffff88053f5417c0
xcookie=ffff88050f4cbf70 [pr=ffff8805381b7160 nd= (null) fl=12]
------------[ cut here ]------------
kernel BUG at fs/cachefiles/namei.c:200!
...
Workqueue: fscache_object fscache_object_work_func [fscache]
...
RIP: ... cachefiles_walk_to_object+0x7ea/0x860 [cachefiles]
...
Call Trace:
[<ffffffffa04dadd8>] ? cachefiles_lookup_object+0x58/0x100 [cachefiles]
[<ffffffffa01affe9>] ? fscache_look_up_object+0xb9/0x1d0 [fscache]
[<ffffffffa01afc4d>] ? fscache_parent_ready+0x2d/0x80 [fscache]
[<ffffffffa01b0672>] ? fscache_object_work_func+0x92/0x1f0 [fscache]
[<ffffffff8107e82b>] ? process_one_work+0x16b/0x400
[<ffffffff8107fc16>] ? worker_thread+0x116/0x380
[<ffffffff8107fb00>] ? manage_workers.isra.21+0x290/0x290
[<ffffffff81085edc>] ? kthread+0xbc/0xe0
[<ffffffff81085e20>] ? flush_kthread_worker+0x80/0x80
[<ffffffff81502d0c>] ? ret_from_fork+0x7c/0xb0
[<ffffffff81085e20>] ? flush_kthread_worker+0x80/0x80
Reported-by: Manuel Schölling <manuel.schoelling@gmx.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
It is OK for pageused == pagecount in the loop, as long as we don't add
another entry to the *pages array. Move the test so that it only triggers
in that case.
Reported-by: Steve Dickson <SteveD@redhat.com>
Fixes: bba5c1887a (nfs: disallow duplicate pages in pgio page vectors)
Cc: Weston Andros Adamson <dros@primarydata.com>
Cc: stable@vger.kernel.org # 3.16.x
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- Optimized support for Intel "Cluster-on-Die" (CoD) topologies (Dave
Hansen)
- Various sched/idle refinements for better idle handling (Nicolas
Pitre, Daniel Lezcano, Chuansheng Liu, Vincent Guittot)
- sched/numa updates and optimizations (Rik van Riel)
- sysbench speedup (Vincent Guittot)
- capacity calculation cleanups/refactoring (Vincent Guittot)
- Various cleanups to thread group iteration (Oleg Nesterov)
- Double-rq-lock removal optimization and various refactorings
(Kirill Tkhai)
- various sched/deadline fixes
... and lots of other changes"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
sched/dl: Use dl_bw_of() under rcu_read_lock_sched()
sched/fair: Delete resched_cpu() from idle_balance()
sched, time: Fix build error with 64 bit cputime_t on 32 bit systems
sched: Improve sysbench performance by fixing spurious active migration
sched/x86: Fix up typo in topology detection
x86, sched: Add new topology for multi-NUMA-node CPUs
sched/rt: Use resched_curr() in task_tick_rt()
sched: Use rq->rd in sched_setaffinity() under RCU read lock
sched: cleanup: Rename 'out_unlock' to 'out_free_new_mask'
sched: Use dl_bw_of() under RCU read lock
sched/fair: Remove duplicate code from can_migrate_task()
sched, mips, ia64: Remove __ARCH_WANT_UNLOCKED_CTXSW
sched: print_rq(): Don't use tasklist_lock
sched: normalize_rt_tasks(): Don't use _irqsave for tasklist_lock, use task_rq_lock()
sched: Fix the task-group check in tg_has_rt_tasks()
sched/fair: Leverage the idle state info when choosing the "idlest" cpu
sched: Let the scheduler see CPU idle states
sched/deadline: Fix inter- exclusive cpusets migrations
sched/deadline: Clear dl_entity params when setscheduling to different class
sched/numa: Kill the wrong/dead TASK_DEAD check in task_numa_fault()
...
Pull RCU updates from Ingo Molnar:
"The main changes in this cycle were:
- changes related to No-CBs CPUs and NO_HZ_FULL
- RCU-tasks implementation
- torture-test updates
- miscellaneous fixes
- locktorture updates
- RCU documentation updates"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits)
workqueue: Use cond_resched_rcu_qs macro
workqueue: Add quiescent state between work items
locktorture: Cleanup header usage
locktorture: Cannot hold read and write lock
locktorture: Fix __acquire annotation for spinlock irq
locktorture: Support rwlocks
rcu: Eliminate deadlock between CPU hotplug and expedited grace periods
locktorture: Document boot/module parameters
rcutorture: Rename rcutorture_runnable parameter
locktorture: Add test scenario for rwsem_lock
locktorture: Add test scenario for mutex_lock
locktorture: Make torture scripting account for new _runnable name
locktorture: Introduce torture context
locktorture: Support rwsems
locktorture: Add infrastructure for torturing read locks
torture: Address race in module cleanup
locktorture: Make statistics generic
locktorture: Teach about lock debugging
locktorture: Support mutexes
locktorture: Add documentation
...
This update contains:
o various cleanups
o log recovery debug hooks
o seek hole/data implementation merge
o extent shift rework to fix collapse range bugs
o various sparse warning fixes
o log recovery transaction processing rework to fix use after free bugs
o metadata buffer IO infrastructuer rework to ensure all buffers under IO have
valid reference counts
o various fixes for ondisk flags, writeback and zero range corner cases
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=TdAB
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs update from Dave Chinner:
"This update contains:
- various cleanups
- log recovery debug hooks
- seek hole/data implementation merge
- extent shift rework to fix collapse range bugs
- various sparse warning fixes
- log recovery transaction processing rework to fix use after free
bugs
- metadata buffer IO infrastructuer rework to ensure all buffers
under IO have valid reference counts
- various fixes for ondisk flags, writeback and zero range corner
cases"
* tag 'xfs-for-linus-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (56 commits)
xfs: fix agno increment in xfs_inumbers() loop
xfs: xfs_iflush_done checks the wrong log item callback
xfs: flush the range before zero range conversion
xfs: restore buffer_head unwritten bit on ioend cancel
xfs: check for null dquot in xfs_quota_calc_throttle()
xfs: fix crc field handling in xfs_sb_to/from_disk
xfs: don't send null bp to xfs_trans_brelse()
xfs: check for inode size overflow in xfs_new_eof()
xfs: only set extent size hint when asked
xfs: project id inheritance is a directory only flag
xfs: kill time.h
xfs: compat_xfs_bstat does not have forkoff
xfs: simplify xfs_zero_remaining_bytes
xfs: check xfs_buf_read_uncached returns correctly
xfs: introduce xfs_buf_submit[_wait]
xfs: kill xfs_bioerror_relse
xfs: xfs_bioerror can die.
xfs: kill xfs_bdstrat_cb
xfs: rework xfs_buf_bio_endio error handling
xfs: xfs_buf_ioend and xfs_buf_iodone_work duplicate functionality
...
Pull vfs updates from Al Viro:
"The big thing in this pile is Eric's unmount-on-rmdir series; we
finally have everything we need for that. The final piece of prereqs
is delayed mntput() - now filesystem shutdown always happens on
shallow stack.
Other than that, we have several new primitives for iov_iter (Matt
Wilcox, culled from his XIP-related series) pushing the conversion to
->read_iter()/ ->write_iter() a bit more, a bunch of fs/dcache.c
cleanups and fixes (including the external name refcounting, which
gives consistent behaviour of d_move() wrt procfs symlinks for long
and short names alike) and assorted cleanups and fixes all over the
place.
This is just the first pile; there's a lot of stuff from various
people that ought to go in this window. Starting with
unionmount/overlayfs mess... ;-/"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (60 commits)
fs/file_table.c: Update alloc_file() comment
vfs: Deduplicate code shared by xattr system calls operating on paths
reiserfs: remove pointless forward declaration of struct nameidata
don't need that forward declaration of struct nameidata in dcache.h anymore
take dname_external() into fs/dcache.c
let path_init() failures treated the same way as subsequent link_path_walk()
fix misuses of f_count() in ppp and netlink
ncpfs: use list_for_each_entry() for d_subdirs walk
vfs: move getname() from callers to do_mount()
gfs2_atomic_open(): skip lookups on hashed dentry
[infiniband] remove pointless assignments
gadgetfs: saner API for gadgetfs_create_file()
f_fs: saner API for ffs_sb_create_file()
jfs: don't hash direct inode
[s390] remove pointless assignment of ->f_op in vmlogrdr ->open()
ecryptfs: ->f_op is never NULL
android: ->f_op is never NULL
nouveau: __iomem misannotations
missing annotation in fs/file.c
fs: namespace: suppress 'may be used uninitialized' warnings
...
Besides the fact that this replacement improves code readability
it also protects from errors caused direct EXT4_S(sb)->s_es manipulation
which may result attempt to use uninitialized csum machinery.
#Testcase_BEGIN
IMG=/dev/ram0
MNT=/mnt
mkfs.ext4 $IMG
mount $IMG $MNT
#Enable feature directly on disk, on mounted fs
tune2fs -O metadata_csum $IMG
# Provoke metadata update, likey result in OOPS
touch $MNT/test
umount $MNT
#Testcase_END
# Replacement script
@@
expression E;
@@
- EXT4_HAS_RO_COMPAT_FEATURE(E, EXT4_FEATURE_RO_COMPAT_METADATA_CSUM)
+ ext4_has_metadata_csum(E)
https://bugzilla.kernel.org/show_bug.cgi?id=82201
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
caused a regression in xfs_inumbers, which in turn broke
xfsdump, causing incomplete dumps.
The loop in xfs_inumbers() needs to fill the user-supplied
buffers, and iterates via xfs_btree_increment, reading new
ags as needed.
But the first time through the loop, if xfs_btree_increment()
succeeds, we continue, which triggers the ++agno at the bottom
of the loop, and we skip to soon to the next ag - without
the proper setup under next_ag to read the next ag.
Fix this by removing the agno increment from the loop conditional,
and only increment agno if we have actually hit the code under
the next_ag: target.
Cc: stable@vger.kernel.org
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This comment is 5 years outdated; init_file() no longer exists.
Signed-off-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The following pairs of system calls dealing with extended attributes only
differ in their behavior on whether the symbolic link is followed (when
the named file is a symbolic link):
- setxattr() and lsetxattr()
- getxattr() and lgetxattr()
- listxattr() and llistxattr()
- removexattr() and lremovexattr()
Despite this, the implementations all had duplicated code, so this commit
redirects each of the above pairs of system calls to a corresponding
function to which different lookup flags (LOOKUP_FOLLOW or 0) are passed.
For me this reduced the stripped size of xattr.o from 8824 to 8248 bytes.
Signed-off-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
As it is, path_lookupat() and path_mounpoint() might end up leaking struct file
reference in some cases.
Spotted-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull security subsystem updates from James Morris.
Mostly ima, selinux, smack and key handling updates.
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (65 commits)
integrity: do zero padding of the key id
KEYS: output last portion of fingerprint in /proc/keys
KEYS: strip 'id:' from ca_keyid
KEYS: use swapped SKID for performing partial matching
KEYS: Restore partial ID matching functionality for asymmetric keys
X.509: If available, use the raw subjKeyId to form the key description
KEYS: handle error code encoded in pointer
selinux: normalize audit log formatting
selinux: cleanup error reporting in selinux_nlmsg_perm()
KEYS: Check hex2bin()'s return when generating an asymmetric key ID
ima: detect violations for mmaped files
ima: fix race condition on ima_rdwr_violation_check and process_measurement
ima: added ima_policy_flag variable
ima: return an error code from ima_add_boot_aggregate()
ima: provide 'ima_appraise=log' kernel option
ima: move keyring initialization to ima_init()
PKCS#7: Handle PKCS#7 messages that contain no X.509 certs
PKCS#7: Better handling of unsupported crypto
KEYS: Overhaul key identification when searching for asymmetric keys
KEYS: Implement binary asymmetric key ID handling
...
In patch 'ext4: refactor ext4_move_extents code base', Dmitry Monakhov has
refactored ext4_move_extents' implementation, but forgot to update the
corresponding comments, this patch will try to delete some useless comments.
Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Xiaoguang Wang <wangxg.fnst@cn.fujitsu.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Delalloc write journal reservations only reserve 1 credit,
to update the inode if necessary. However, it may happen
once in a filesystem's lifetime that a file will cross
the 2G threshold, and require the LARGE_FILE feature to
be set in the superblock as well, if it was not set already.
This overruns the transaction reservation, and can be
demonstrated simply on any ext4 filesystem without the LARGE_FILE
feature already set:
dd if=/dev/zero of=testfile bs=1 seek=2147483646 count=1 \
conv=notrunc of=testfile
sync
dd if=/dev/zero of=testfile bs=1 seek=2147483647 count=1 \
conv=notrunc of=testfile
leads to:
EXT4-fs: ext4_do_update_inode:4296: aborting transaction: error 28 in __ext4_handle_dirty_super
EXT4-fs error (device loop0) in ext4_do_update_inode:4301: error 28
EXT4-fs error (device loop0) in ext4_reserve_inode_write:4757: Readonly filesystem
EXT4-fs error (device loop0) in ext4_dirty_inode:4876: error 28
EXT4-fs error (device loop0) in ext4_da_write_end:2685: error 28
Adjust the number of credits based on whether the flag is
already set, and whether the current write may extend past the
LARGE_FILE limit.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@vger.kernel.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Hhee
-----END PGP SIGNATURE-----
Merge tag 'locks-v3.18-1' of git://git.samba.org/jlayton/linux
Pull file locking related changes from Jeff Layton:
"This release is a little more busy for file locking changes than the
last:
- a set of patches from Kinglong Mee to fix the lockowner handling in
knfsd
- a pile of cleanups to the internal file lease API. This should get
us a bit closer to allowing for setlease methods that can block.
There are some dependencies between mine and Bruce's trees this cycle,
and I based my tree on top of the requisite patches in Bruce's tree"
* tag 'locks-v3.18-1' of git://git.samba.org/jlayton/linux: (26 commits)
locks: fix fcntl_setlease/getlease return when !CONFIG_FILE_LOCKING
locks: flock_make_lock should return a struct file_lock (or PTR_ERR)
locks: set fl_owner for leases to filp instead of current->files
locks: give lm_break a return value
locks: __break_lease cleanup in preparation of allowing direct removal of leases
locks: remove i_have_this_lease check from __break_lease
locks: move freeing of leases outside of i_lock
locks: move i_lock acquisition into generic_*_lease handlers
locks: define a lm_setup handler for leases
locks: plumb a "priv" pointer into the setlease routines
nfsd: don't keep a pointer to the lease in nfs4_file
locks: clean up vfs_setlease kerneldoc comments
locks: generic_delete_lease doesn't need a file_lock at all
nfsd: fix potential lease memory leak in nfs4_setlease
locks: close potential race in lease_get_mtime
security: make security_file_set_fowner, f_setown and __f_setown void return
locks: consolidate "nolease" routines
locks: remove lock_may_read and lock_may_write
lockd: rip out deferred lock handling from testlock codepath
NFSD: Get reference of lockowner when coping file_lock
...
Pull btrfs updates from Chris Mason:
"The largest set of changes here come from Miao Xie. He's cleaning up
and improving read recovery/repair for raid, and has a number of
related fixes.
I've merged another set of fsync fixes from Filipe, and he's also
improved the way we handle metadata write errors to make sure we force
the FS readonly if things go wrong.
Otherwise we have a collection of fixes and cleanups. Dave Sterba
gets a cookie for removing the most lines (thanks Dave)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (139 commits)
btrfs: Fix compile error when CONFIG_SECURITY is not set.
Btrfs: fix compiles when CONFIG_BTRFS_FS_RUN_SANITY_TESTS is off
btrfs: Make btrfs handle security mount options internally to avoid losing security label.
Btrfs: send, don't delay dir move if there's a new parent inode
btrfs: add more superblock checks
Btrfs: fix race in WAIT_SYNC ioctl
Btrfs: be aware of btree inode write errors to avoid fs corruption
Btrfs: remove redundant btrfs_verify_qgroup_counts declaration.
btrfs: fix shadow warning on cmp
Btrfs: fix compilation errors under DEBUG
Btrfs: fix crash of btrfs_release_extent_buffer_page
Btrfs: add missing end_page_writeback on submit_extent_page failure
btrfs: Fix the wrong condition judgment about subset extent map
Btrfs: fix build_backref_tree issue with multiple shared blocks
Btrfs: cleanup error handling in build_backref_tree
btrfs: move checks for DUMMY_ROOT into a helper
btrfs: new define for the inline extent data start
btrfs: kill extent_buffer_page helper
btrfs: drop constant param from btrfs_release_extent_buffer_page
btrfs: hide typecast to definition of BTRFS_SEND_TRANS_STUB
...
Pull UDF and quota updates from Jan Kara:
"A few UDF fixes and also a few patches which are preparing filesystems
for support of project quotas in VFS"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Fix loading of special inodes
ocfs2: Back out change to use OCFS2_MAXQUOTAS in ocfs2_setattr()
udf: remove redundant sys_tz declaration
ocfs2: Don't use MAXQUOTAS value
reiserfs: Don't use MAXQUOTAS value
ext3: Don't use MAXQUOTAS value
udf: Fix race between write(2) and close(2)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mjS7
-----END PGP SIGNATURE-----
Merge tag 'ecryptfs-3.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs
Pull eCryptfs updates from Tyler Hicks:
"Minor code cleanups and a fix for when eCryptfs metadata is stored in
xattrs"
* tag 'ecryptfs-3.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
ecryptfs: remove unneeded buggy code in ecryptfs_do_create()
ecryptfs: avoid to access NULL pointer when write metadata in xattr
ecryptfs: remove unnecessary break after goto
ecryptfs: Remove unnecessary include of syscall.h in keystore.c
fs/ecryptfs/messaging.c: remove null test before kfree
ecryptfs: Drop cast
Use %pd in eCryptFS
which are now ignored (i_goal is basically a hint so it is safe to so this)
and another relating to the saving of the dirent location during rename.
There is one performance improvement, which is an optimisation in rgblk_free
so that multiple block deallocations will now be more efficient,
and one clean up patch to use _RET_IP_ rather than writing it out longhand.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=+QNn
-----END PGP SIGNATURE-----
Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw
Pull gfs2 updates from Steven Whitehouse:
"This time we have a couple of bug fixes, one relating to bad i_goal
values which are now ignored (i_goal is basically a hint so it is safe
to so this) and another relating to the saving of the dirent location
during rename.
There is one performance improvement, which is an optimisation in
rgblk_free so that multiple block deallocations will now be more
efficient, and one clean up patch to use _RET_IP_ rather than writing
it out longhand"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
GFS2: use _RET_IP_ instead of (unsigned long)__builtin_return_address(0)
GFS2: Use gfs2_rbm_incr in rgblk_free
GFS2: Make rename not save dirent location
GFS2: fix bad inode i_goal values during block allocation
Pull percpu updates from Tejun Heo:
"A lot of activities on percpu front. Notable changes are...
- percpu allocator now can take @gfp. If @gfp doesn't contain
GFP_KERNEL, it tries to allocate from what's already available to
the allocator and a work item tries to keep the reserve around
certain level so that these atomic allocations usually succeed.
This will replace the ad-hoc percpu memory pool used by
blk-throttle and also be used by the planned blkcg support for
writeback IOs.
Please note that I noticed a bug in how @gfp is interpreted while
preparing this pull request and applied the fix 6ae833c7fe
("percpu: fix how @gfp is interpreted by the percpu allocator")
just now.
- percpu_ref now uses longs for percpu and global counters instead of
ints. It leads to more sparse packing of the percpu counters on
64bit machines but the overhead should be negligible and this
allows using percpu_ref for refcnting pages and in-memory objects
directly.
- The switching between percpu and single counter modes of a
percpu_ref is made independent of putting the base ref and a
percpu_ref can now optionally be initialized in single or killed
mode. This allows avoiding percpu shutdown latency for cases where
the refcounted objects may be synchronously created and destroyed
in rapid succession with only a fraction of them reaching fully
operational status (SCSI probing does this when combined with
blk-mq support). It's also planned to be used to implement forced
single mode to detect underflow more timely for debugging.
There's a separate branch percpu/for-3.18-consistent-ops which cleans
up the duplicate percpu accessors. That branch causes a number of
conflicts with s390 and other trees. I'll send a separate pull
request w/ resolutions once other branches are merged"
* 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (33 commits)
percpu: fix how @gfp is interpreted by the percpu allocator
blk-mq, percpu_ref: start q->mq_usage_counter in atomic mode
percpu_ref: make INIT_ATOMIC and switch_to_atomic() sticky
percpu_ref: add PERCPU_REF_INIT_* flags
percpu_ref: decouple switching to percpu mode and reinit
percpu_ref: decouple switching to atomic mode and killing
percpu_ref: add PCPU_REF_DEAD
percpu_ref: rename things to prepare for decoupling percpu/atomic mode switch
percpu_ref: replace pcpu_ prefix with percpu_
percpu_ref: minor code and comment updates
percpu_ref: relocate percpu_ref_reinit()
Revert "blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during probe"
Revert "percpu: free percpu allocation info for uniprocessor system"
percpu-refcount: make percpu_ref based on longs instead of ints
percpu-refcount: improve WARN messages
percpu: fix locking regression in the failure path of pcpu_alloc()
percpu-refcount: add @gfp to percpu_ref_init()
proportions: add @gfp to init functions
percpu_counter: add @gfp to percpu_counter_init()
percpu_counter: make percpu_counters_lock irq-safe
...
Pull cgroup updates from Tejun Heo:
"Nothing too interesting. Just a handful of cleanup patches"
* 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
Revert "cgroup: remove redundant variable in cgroup_mount()"
cgroup: remove redundant variable in cgroup_mount()
cgroup: fix missing unlock in cgroup_release_agent()
cgroup: remove CGRP_RELEASABLE flag
perf/cgroup: Remove perf_put_cgroup()
cgroup: remove redundant check in cgroup_ino()
cpuset: simplify proc_cpuset_show()
cgroup: simplify proc_cgroup_show()
cgroup: use a per-cgroup work for release agent
cgroup: remove bogus comments
cgroup: remove redundant code in cgroup_rmdir()
cgroup: remove some useless forward declarations
cgroup: fix a typo in comment.
Increase the buffer-head per-CPU LRU size to allow efficient filesystem
operations that access many blocks for each transaction. For example,
creating a file in a large ext4 directory with quota enabled will access
multiple buffer heads and will overflow the LRU at the default 8-block LRU
size:
* parent directory inode table block (ctime, nlinks for subdirs)
* new inode bitmap
* inode table block
* 2 quota blocks
* directory leaf block (not reused, but pollutes one cache entry)
* 2 levels htree blocks (only one is reused, other pollutes cache)
* 2 levels indirect/index blocks (only one is reused)
The buffer-head per-CPU LRU size is raised to 16, as it shows in metadata
performance benchmarks up to 10% gain for create, 4% for lookup and 7% for
destroy.
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Sebastien Buisson <sebastien.buisson@bull.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Always mark pages with PageBalloon even if balloon compaction is disabled
and expose this mark in /proc/kpageflags as KPF_BALLOON.
Also this patch adds three counters into /proc/vmstat: "balloon_inflate",
"balloon_deflate" and "balloon_migrate". They accumulate balloon
activity. Current size of balloon is (balloon_inflate - balloon_deflate)
pages.
All generic balloon code now gathered under option CONFIG_MEMORY_BALLOON.
It should be selected by ballooning driver which wants use this feature.
Currently virtio-balloon is the only user.
Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a /proc/pid/pagemap read spans a [VMA, an unmapped region, then a
VM_SOFTDIRTY VMA], the virtual pages in the unmapped region are reported
as softdirty. Here's a program to demonstrate the bug:
int main() {
const uint64_t PAGEMAP_SOFTDIRTY = 1ul << 55;
uint64_t pme[3];
int fd = open("/proc/self/pagemap", O_RDONLY);;
char *m = mmap(NULL, 3 * getpagesize(), PROT_READ,
MAP_ANONYMOUS | MAP_SHARED, -1, 0);
munmap(m + getpagesize(), getpagesize());
pread(fd, pme, 24, (unsigned long) m / getpagesize() * 8);
assert(pme[0] & PAGEMAP_SOFTDIRTY); /* passes */
assert(!(pme[1] & PAGEMAP_SOFTDIRTY)); /* fails */
assert(pme[2] & PAGEMAP_SOFTDIRTY); /* passes */
return 0;
}
(Note that all pages in new VMAs are softdirty until cleared).
Tested:
Used the program given above. I'm going to include this code in
a selftest in the future.
[n-horiguchi@ah.jp.nec.com: prevent pagemap_pte_range() from overrunning]
Signed-off-by: Peter Feiner <pfeiner@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Jamie Liu <jamieliu@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a deadlock problem caused by direct memory reclaim in o2net_wq. The
situation is as follows:
1) Receive a connect message from another node, node queues a
work_struct o2net_listen_work.
2) o2net_wq processes this work and call the following functions:
o2net_wq
-> o2net_accept_one
-> sock_create_lite
-> sock_alloc()
-> kmem_cache_alloc with GFP_KERNEL
-> ____cache_alloc_node
->__alloc_pages_nodemask
-> do_try_to_free_pages
-> shrink_slab
-> evict
-> ocfs2_evict_inode
-> ocfs2_drop_lock
-> dlmunlock
-> o2net_send_message_vec
then o2net_wq wait for the unlock reply from master.
3) tcp layer received the reply, call o2net_data_ready() and queue
sc_rx_work, waiting o2net_wq to process this work.
4) o2net_wq is a single thread workqueue, it process the work one by
one. Right now it is still doing o2net_listen_work and cannot handle
sc_rx_work. so we deadlock.
Junxiao Bi's patch "mm: clear __GFP_FS when PF_MEMALLOC_NOIO is set"
(http://ozlabs.org/~akpm/mmots/broken-out/mm-clear-__gfp_fs-when-pf_memalloc_noio-is-set.patch)
clears __GFP_FS in memalloc_noio_flags() besides __GFP_IO. We use
memalloc_noio_save() to set process flag PF_MEMALLOC_NOIO so that all
allocations done by this process are done as if GFP_NOIO was specified.
We are not reentering filesystem while doing memory reclaim.
Signed-off-by: joyce.xue <xuejiufei@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9e7814404b "hold task->mempolicy while numa_maps scans." fixed the
race with the exiting task but this is not enough.
The current code assumes that get_vma_policy(task) should either see
task->mempolicy == NULL or it should be equal to ->task_mempolicy saved
by hold_task_mempolicy(), so we can never race with __mpol_put(). But
this can only work if we can't race with do_set_mempolicy(), and thus
we can't race with another do_set_mempolicy() or do_exit() after that.
However, do_set_mempolicy()->down_write(mmap_sem) can not prevent this
race. This task can exec, change it's ->mm, and call do_set_mempolicy()
after that; in this case they take 2 different locks.
Change hold_task_mempolicy() to use get_task_policy(), it never returns
NULL, and change show_numa_map() to use __get_vma_policy() or fall back
to proc_priv->task_mempolicy.
Note: this is the minimal fix, we will cleanup this code later. I think
hold_task_mempolicy() and release_task_mempolicy() should die, we can
move this logic into show_numa_map(). Or we can move get_task_policy()
outside of ->mmap_sem and !CONFIG_NUMA code at least.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sequential read from a block device is expected to be equal or faster than
from the file on a filesystem. But it is not correct due to the lack of
effective readpages() in the address space operations for block device.
This implements readpages() operation for block device by using
mpage_readpages() which can create multipage BIOs instead of BIOs for each
page and reduce system CPU time consumption.
Install 1GB of RAM disk storage:
# modprobe scsi_debug dev_size_mb=1024 delay=0
Sequential read from file on a filesystem:
# mkfs.ext4 /dev/$DEV
# mount /dev/$DEV /mnt
# fio --name=t --size=512m --rw=read --filename=/mnt/file
...
read : io=524288KB, bw=2133.4MB/s, iops=546133, runt= 240msec
Sequential read from a block device:
# fio --name=t --size=512m --rw=read --filename=/dev/$DEV
...
(Without this commit)
read : io=524288KB, bw=1700.2MB/s, iops=435455, runt= 301msec
(With this commit)
read : io=524288KB, bw=2160.4MB/s, iops=553046, runt= 237msec
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add guard_bio_eod() check for mpage code in order to allow us to do IO
even on the odd last sectors of a device, even if the block size is some
multiple of the physical sector size.
Using mpage_readpages() for block device requires this guard check.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patchset implements readpages() operation for block device by using
mpage_readpages() which can create multipage BIOs instead of BIOs for each
page and reduce system CPU time consumption.
This patch (of 3):
guard_bh_eod() is used in submit_bh() to allow us to do IO even on the odd
last sectors of a device, even if the block size is some multiple of the
physical sector size. This makes guard_bh_eod() more generic and renames
it guard_bio_eod() so that we can use it without struct buffer_head
argument.
The reason for this change is that using mpage_readpages() for block
device requires to add this guard check in mpage code.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On some ARCHs modules range is eauql to vmalloc range. E.g on i686
"#define MODULES_VADDR VMALLOC_START"
"#define MODULES_END VMALLOC_END"
This will cause 2 duplicate program segments in /proc/kcore, and no flag
to indicate they are different. This is confusing. And usually people
who need check the elf header or read the content of kcore will check
memory ranges. Two program segments which are the same are unnecessary.
So check if the modules range is equal to vmalloc range. If so, just skip
adding the modules range.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Rename vm_is_stack() to task_of_stack() and change it to return
"struct task_struct *" rather than the global (and thus wrong in
general) pid_t.
- Add the new pid_of_stack() helper which calls task_of_stack() and
uses the right namespace to report the correct pid_t.
Unfortunately we need to define this helper twice, in task_mmu.c
and in task_nommu.c. perhaps it makes sense to add fs/proc/util.c
and move at least pid_of_stack/task_of_stack there to avoid the
code duplication.
- Change show_map_vma() and show_numa_map() to use the new helper.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
m_start() can use get_proc_task() instead, and "struct inode *"
provides more potentially useful info, see the next changes.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I do not know if CONFIG_PREEMPT/SMP is possible without CONFIG_MMU
but the usage of task->mm in m_stop(). The task can exit/exec before
we take mmap_sem, in this case m_stop() can hit NULL or unlock the
wrong rw_semaphore.
Also, this code uses priv->task != NULL to decide whether we need
up_read/mmput. This is correct, but we will probably kill priv->task.
Change m_start/m_stop to rely on IS_ERR_OR_NULL() like task_mmu.c does.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Copy-and-paste the changes from "fs/proc/task_mmu.c: shift mm_access()
from m_start() to proc_maps_open()" into task_nommu.c.
Change maps_open() to initialize priv->mm using proc_mem_open(), m_start()
can rely on atomic_inc_not_zero(mm_users) like task_mmu.c does.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change the main loop in m_start() to update m->version. Mostly for
consistency, but this can help to avoid the same loop if the very
1st ->show() fails due to seq_overflow().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add the "last_addr" optimization back. Like before, every ->show()
method checks !seq_overflow() and sets m->version = vma->vm_start.
However, it also checks that m_next_vma(vma) != NULL, otherwise it
sets m->version = -1 for the lockless "EOF" fast-path in m_start().
m_start() can simply do find_vma() + m_next_vma() if last_addr is
not zero, the code looks clear and simple and this case is clearly
separated from "scan vmas" path.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Extract the tail_vma/vm_next calculation from m_next() into the new
trivial helper, m_next_vma().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that m->version is gone we can cleanup m_start(). In particular,
- Remove the "unsigned long" typecast, m->index can't be negative
or exceed ->map_count. But lets use "unsigned int pos" to make
it clear that "pos < map_count" is safe.
- Remove the unnecessary "vma != NULL" check in the main loop. It
can't be NULL unless we have a vm bug.
- This also means that "pos < map_count" case can simply return the
valid vma and avoid "goto" and subsequent checks.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
m_start() carefully documents, checks, and sets "m->version = -1" if
we are going to return NULL. The only problem is that we will be never
called again if m_start() returns NULL, so this is simply pointless
and misleading.
Otoh, ->show() methods m->version = 0 if vma == tail_vma and this is
just wrong, we want -1 in this case. And in fact we also want -1 if
->vm_next == NULL and ->tail_vma == NULL.
And it is not used consistently, the "scan vmas" loop in m_start()
should update last_addr too.
Finally, imo the whole "last_addr" logic in m_start() looks horrible.
find_vma(last_addr) is called unconditionally even if we are not going
to use the result. But the main problem is that this code participates
in tail_vma-or-NULL mess, and this looks simply unfixable.
Remove this optimization. We will add it back after some cleanups.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1. There is no reason to reset ->tail_vma in m_start(), if we return
IS_ERR_OR_NULL() it won't be used.
2. m_start() also clears priv->task to ensure that m_stop() won't use
the stale pointer if we fail before get_task_struct(). But this is
ugly and confusing, move this initialization in m_stop().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1. Kill the first "vma != NULL" check. Firstly this is not possible,
m_next() won't be called if ->start() or the previous ->next()
returns NULL.
And if it was possible the 2nd "vma != tail_vma" check is buggy,
we should not wrongly return ->tail_vma.
2. Make this function readable. The logic is very simple, we should
return check "vma != tail" once and return "vm_next || tail_vma".
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
m_start() drops ->mmap_sem and does mmput() if it retuns vsyscall
vma. This is because in this case m_stop()->vma_stop() obviously
can't use gate_vma->vm_mm.
Now that we have proc_maps_private->mm we can simplify this logic:
- Change m_start() to return with ->mmap_sem held unless it returns
IS_ERR_OR_NULL().
- Change vma_stop() to use priv->mm and avoid the ugly vma checks,
this makes "vm_area_struct *vma" unnecessary.
- This also allows m_start() to use vm_stop().
- Cleanup m_next() to follow the new locking rule.
Note: m_stop() looks very ugly, and this temporary uglifies it
even more. Fixed by the next change.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A simple test-case from Kirill Shutemov
cat /proc/self/maps >/dev/null
chmod +x /proc/self/net/packet
exec /proc/self/net/packet
makes lockdep unhappy, cat/exec take seq_file->lock + cred_guard_mutex in
the opposite order.
It's a false positive and probably we should not allow "chmod +x" on proc
files. Still I think that we should avoid mm_access() and cred_guard_mutex
in sys_read() paths, security checking should happen at open time. Besides,
this doesn't even look right if the task changes its ->mm between m_stop()
and m_start().
Add the new "mm_struct *mm" member into struct proc_maps_private and change
proc_maps_open() to initialize it using proc_mem_open(). Change m_start() to
use priv->mm if atomic_inc_not_zero(mm_users) succeeds or return NULL (eof)
otherwise.
The only complication is that proc_maps_open() users should additionally do
mmdrop() in fop->release(), add the new proc_map_release() helper for that.
Note: this is the user-visible change, if the task execs after open("maps")
the new ->mm won't be visible via this file. I hope this is fine, and this
matches /proc/pid/mem bahaviour.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Extract the mm_access() code from __mem_open() into the new helper,
proc_mem_open(), the next patch will add another caller.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
do_maps_open() and numa_maps_open() are overcomplicated, they could use
__seq_open_private(). Plus they do the same, just sizeof(*priv)
Change them to use a new simple helper, proc_maps_open(ops, psize). This
simplifies the code and allows us to do the next changes.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
get_gate_vma(priv->task->mm) looks ugly and wrong, task->mm can be NULL or
it can changed by exec right after mm_access().
And in theory this race is not harmless, the task can exec and then later
exit and free the new mm_struct. In this case get_task_mm(oldmm) can't
help, get_gate_vma(task->mm) can read the freed/unmapped memory.
I think that priv->task should simply die and hold_task_mempolicy() logic
can be simplified. tail_vma logic asks for cleanups too.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For commit ocfs2 journal, ocfs2 journal thread will acquire the mutex
osb->journal->j_trans_barrier and wake up jbd2 commit thread, then it
will wait until jbd2 commit thread done. In order journal mode, jbd2
needs flushing dirty data pages first, and this needs get page lock.
So osb->journal->j_trans_barrier should be got before page lock.
But ocfs2_write_zero_page() and ocfs2_write_begin_inline() obey this
locking order, and this will cause deadlock and hung the whole cluster.
One deadlock catched is the following:
PID: 13449 TASK: ffff8802e2f08180 CPU: 31 COMMAND: "oracle"
#0 [ffff8802ee3f79b0] __schedule at ffffffff8150a524
#1 [ffff8802ee3f7a58] schedule at ffffffff8150acbf
#2 [ffff8802ee3f7a68] rwsem_down_failed_common at ffffffff8150cb85
#3 [ffff8802ee3f7ad8] rwsem_down_read_failed at ffffffff8150cc55
#4 [ffff8802ee3f7ae8] call_rwsem_down_read_failed at ffffffff812617a4
#5 [ffff8802ee3f7b50] ocfs2_start_trans at ffffffffa0498919 [ocfs2]
#6 [ffff8802ee3f7ba0] ocfs2_zero_start_ordered_transaction at ffffffffa048b2b8 [ocfs2]
#7 [ffff8802ee3f7bf0] ocfs2_write_zero_page at ffffffffa048e9bd [ocfs2]
#8 [ffff8802ee3f7c80] ocfs2_zero_extend_range at ffffffffa048ec83 [ocfs2]
#9 [ffff8802ee3f7ce0] ocfs2_zero_extend at ffffffffa048edfd [ocfs2]
#10 [ffff8802ee3f7d50] ocfs2_extend_file at ffffffffa049079e [ocfs2]
#11 [ffff8802ee3f7da0] ocfs2_setattr at ffffffffa04910ed [ocfs2]
#12 [ffff8802ee3f7e70] notify_change at ffffffff81187d29
#13 [ffff8802ee3f7ee0] do_truncate at ffffffff8116bbc1
#14 [ffff8802ee3f7f50] sys_ftruncate at ffffffff8116bcbd
#15 [ffff8802ee3f7f80] system_call_fastpath at ffffffff81515142
RIP: 00007f8de750c6f7 RSP: 00007fffe786e478 RFLAGS: 00000206
RAX: 000000000000004d RBX: ffffffff81515142 RCX: 0000000000000000
RDX: 0000000000000200 RSI: 0000000000028400 RDI: 000000000000000d
RBP: 00007fffe786e040 R8: 0000000000000000 R9: 000000000000000d
R10: 0000000000000000 R11: 0000000000000206 R12: 000000000000000d
R13: 00007fffe786e710 R14: 00007f8de70f8340 R15: 0000000000028400
ORIG_RAX: 000000000000004d CS: 0033 SS: 002b
crash64> bt
PID: 7610 TASK: ffff88100fd56140 CPU: 1 COMMAND: "ocfs2cmt"
#0 [ffff88100f4d1c50] __schedule at ffffffff8150a524
#1 [ffff88100f4d1cf8] schedule at ffffffff8150acbf
#2 [ffff88100f4d1d08] jbd2_log_wait_commit at ffffffffa01274fd [jbd2]
#3 [ffff88100f4d1d98] jbd2_journal_flush at ffffffffa01280b4 [jbd2]
#4 [ffff88100f4d1dd8] ocfs2_commit_cache at ffffffffa0499b14 [ocfs2]
#5 [ffff88100f4d1e38] ocfs2_commit_thread at ffffffffa0499d38 [ocfs2]
#6 [ffff88100f4d1ee8] kthread at ffffffff81090db6
#7 [ffff88100f4d1f48] kernel_thread_helper at ffffffff81516284
crash64> bt
PID: 7609 TASK: ffff88100f2d4480 CPU: 0 COMMAND: "jbd2/dm-20-86"
#0 [ffff88100def3920] __schedule at ffffffff8150a524
#1 [ffff88100def39c8] schedule at ffffffff8150acbf
#2 [ffff88100def39d8] io_schedule at ffffffff8150ad6c
#3 [ffff88100def39f8] sleep_on_page at ffffffff8111069e
#4 [ffff88100def3a08] __wait_on_bit_lock at ffffffff8150b30a
#5 [ffff88100def3a58] __lock_page at ffffffff81110687
#6 [ffff88100def3ab8] write_cache_pages at ffffffff8111b752
#7 [ffff88100def3be8] generic_writepages at ffffffff8111b901
#8 [ffff88100def3c48] journal_submit_data_buffers at ffffffffa0120f67 [jbd2]
#9 [ffff88100def3cf8] jbd2_journal_commit_transaction at ffffffffa0121372[jbd2]
#10 [ffff88100def3e68] kjournald2 at ffffffffa0127a86 [jbd2]
#11 [ffff88100def3ee8] kthread at ffffffff81090db6
#12 [ffff88100def3f48] kernel_thread_helper at ffffffff81516284
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Alex Chen <alex.chen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The following case may lead to o2net_wq and o2hb thread deadlock on
o2hb_callback_sem.
Currently there are 2 nodes say N1, N2 in the cluster. And N2 down, at
the same time, N3 tries to join the cluster. So N1 will handle node
down (N2) and join (N3) simultaneously.
o2hb o2net_wq
->o2hb_do_disk_heartbeat
->o2hb_check_slot
->o2hb_run_event_list
->o2hb_fire_callbacks
->down_write(&o2hb_callback_sem)
->o2net_hb_node_down_cb
->flush_workqueue(o2net_wq)
->o2net_process_message
->dlm_query_join_handler
->o2hb_check_node_heartbeating
->o2hb_fill_node_map
->down_read(&o2hb_callback_sem)
No need to take o2hb_callback_sem in dlm_query_join_handler,
o2hb_live_lock is enough to protect live node map.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: xMark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: jiangyiwen <jiangyiwen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Firing quorum before connection established can cause unexpected node to
reboot.
Assume there are 3 nodes in the cluster, Node 1, 2, 3. Node 2 and 3 have
wrong ip address of Node 1 in cluster.conf and global heartbeat is enabled
in the cluster. After the heatbeats are started on these three nodes,
Node 1 will reboot due to quorum fencing. It is similar case if Node 1's
networking is not ready when starting the global heartbeat.
The reboot is not friendly as customer is not fully ready for ocfs2 to
work. Fix it by not allowing firing quorum before the connection is
established. In this case, ocfs2 will wait until the wrong configuration
is fixed or networking is up to continue. Also update the log to guide
the user where to check when connection is not built for a long time.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reduce boilerplate code by using seq_open_private() instead of seq_open()
Signed-off-by: Rob Jones <rob.jones@codethink.co.uk>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reduce boilerplate code by using seq_open_private() instead of seq_open()
Note that the code in and using sc_common_open() has been quite
extensively changed. Not least because there was a latent memory leak in
the code as was: if sc_common_open() failed, the previously allocated
buffer was not freed.
Signed-off-by: Rob Jones <rob.jones@codethink.co.uk>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reduce boilerplate code by using seq_open_private() instead of seq_open()
Signed-off-by: Rob Jones <rob.jones@codethink.co.uk>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>