In csum_dirty_buffer, we first get eb from page->private.
Then we check if the page is the first page of eb. Later
we check it again. Remove the repeated check here.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
So far the return code of barrier_all_devices() is ignored, which
means that errors are ignored. The result can be a corrupt
filesystem which is not consistent.
This commit adds code to evaluate the return code of
barrier_all_devices(). The normal btrfs_error() mechanism is used to
switch the filesystem into read-only mode when errors are detected.
In order to decide whether barrier_all_devices() should return
error or success, the number of disks that are allowed to fail the
barrier submission is calculated. This calculation accounts for the
worst RAID level of metadata, system and data. If single, dup or
RAID0 is in use, a single disk error is already considered to be
fatal. Otherwise a single disk error is tolerated.
The calculation of the number of disks that are tolerated to fail
the barrier operation is performed when the filesystem gets mounted,
when a balance operation is started and finished, and when devices
are added or removed.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Everytime we write out dirty pages we search for an offset in the tree,
convert the bits in the state, and then when we wait we search for the
offset again and clear the bits. So for every dirty range in the io tree we
are doing 4 rb searches, which is suboptimal. With this patch we are only
doing 2 searches for every cycle (modulo weird things happening). Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
There are a coule scenarios where farming metadata csumming off to an async
thread doesn't help. The first is if our processor supports crc32c, in
which case the csumming will be fast and so the overhead of the async model
is not worth the cost. The other case is for our tree log. We will be
making that stuff dirty and writing it out and waiting for it immediately.
Even with software crc32c this gives me a ~15% increase in speed with O_SYNC
workloads. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
With the following debug patch:
static int btrfs_freeze(struct super_block *sb)
{
+ struct btrfs_fs_info *fs_info = btrfs_sb(sb);
+ struct btrfs_transaction *trans;
+
+ spin_lock(&fs_info->trans_lock);
+ trans = fs_info->running_transaction;
+ if (trans) {
+ printk("Transid %llu, use_count %d, num_writer %d\n",
+ trans->transid, atomic_read(&trans->use_count),
+ atomic_read(&trans->num_writers));
+ }
+ spin_unlock(&fs_info->trans_lock);
return 0;
}
I found there was a orphan transaction after the freeze operation was done.
It is because the transaction may not be committed when the transaction handle
end even though it is the last handle of the current transaction. This design
avoid committing the transaction frequently, but also introduce the above
problem.
So I add btrfs_attach_transaction() which can catch the current transaction
and commit it. If there is no transaction, it will return ENOENT, and do not
anything.
This function also can be used to instead of btrfs_join_transaction_freeze()
because it don't increase the writer counter and don't start a new transaction,
so it also can fix the deadlock between sync and freeze.
Besides that, it is used to instead of btrfs_join_transaction() in
transaction_kthread(), because if there is no transaction, the transaction
kthread needn't anything.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
The btree inode has it's own write cache pages so we can remove this write
cache pages hook as it's not used. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Unnecessary lookup_extent_mapping() is removed because an error is
returned to the caller.
This patch was made based on the advice from Stefan Behrens, thanks.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
As ref cache has been removed from btrfs, there is no user on
its lock and its check.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
We forget to protect ->log_batch when syncing a file, this patch fix
this problem by atomic operation. And ->log_batch is used to check
if there are parallel sync operations or not, so it is unnecessary to
reset it to 0 after the sync operation of the current log tree complete.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Sometimes we need choose the method of the reservation according to the type
of the block reservation, such as the reservation for the delayed inode update.
Now we identify the type just by comparing the address of the reservation
variants, it is very ugly if it is a temporary one because we need compare it
with all the common reservation variants. So we add a new "type" field to keep
the type the reservation variants.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Pull btrfs fixes from Chris Mason:
"I've split out the big send/receive update from my last pull request
and now have just the fixes in my for-linus branch. The send/recv
branch will wander over to linux-next shortly though.
The largest patches in this pull are Josef's patches to fix DIO
locking problems and his patch to fix a crash during balance. They
are both well tested.
The rest are smaller fixes that we've had queued. The last rc came
out while I was hacking new and exciting ways to recover from a
misplaced rm -rf on my dev box, so these missed rc3."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (25 commits)
Btrfs: fix that repair code is spuriously executed for transid failures
Btrfs: fix ordered extent leak when failing to start a transaction
Btrfs: fix a dio write regression
Btrfs: fix deadlock with freeze and sync V2
Btrfs: revert checksum error statistic which can cause a BUG()
Btrfs: remove superblock writing after fatal error
Btrfs: allow delayed refs to be merged
Btrfs: fix enospc problems when deleting a subvol
Btrfs: fix wrong mtime and ctime when creating snapshots
Btrfs: fix race in run_clustered_refs
Btrfs: don't run __tree_mod_log_free_eb on leaves
Btrfs: increase the size of the free space cache
Btrfs: barrier before waitqueue_active
Btrfs: fix deadlock in wait_for_more_refs
btrfs: fix second lock in btrfs_delete_delayed_items()
Btrfs: don't allocate a seperate csums array for direct reads
Btrfs: do not strdup non existent strings
Btrfs: do not use missing devices when showing devname
Btrfs: fix that error value is changed by mistake
Btrfs: lock extents as we map them in DIO
...
If verify_parent_transid() fails for all mirrors, the current code
calls repair_io_failure() anyway which means:
- that the disk block is rewritten without repairing anything and
- that a kernel log message is printed which misleadingly claims
that a read error was corrected.
This is an example:
parent transid verify failed on 615015833600 wanted 110423 found 110424
parent transid verify failed on 615015833600 wanted 110423 found 110424
btrfs read error corrected: ino 1 off 615015833600 (dev /dev/...)
It is wrong to ignore the results from verify_parent_transid() and to
call repair_eb_io_failure() when the verification of the transids failed.
This commit fixes the issue.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
With commit acce952b0, btrfs was changed to flag the filesystem with
BTRFS_SUPER_FLAG_ERROR and switch to read-only mode after a fatal
error happened like a write I/O errors of all mirrors.
In such situations, on unmount, the superblock is written in
btrfs_error_commit_super(). This is done with the intention to be able
to evaluate the error flag on the next mount. A warning is printed
in this case during the next mount and the log tree is ignored.
The issue is that it is possible that the superblock points to a root
that was not written (due to write I/O errors).
The result is that the filesystem cannot be mounted. btrfsck also does
not start and all the other btrfs-progs tools fail to start as well.
However, mount -o recovery is working well and does the right things
to recover the filesystem (i.e., don't use the log root, clear the
free space cache and use the next mountable root that is stored in the
root backup array).
This patch removes the writing of the superblock when
BTRFS_SUPER_FLAG_ERROR is set, and removes the handling of the error
flag in the mount function.
These lines can be used to reproduce the issue (using /dev/sdm):
SCRATCH_DEV=/dev/sdm
SCRATCH_MNT=/mnt
echo 0 25165824 linear $SCRATCH_DEV 0 | dmsetup create foo
ls -alLF /dev/mapper/foo
mkfs.btrfs /dev/mapper/foo
mount /dev/mapper/foo $SCRATCH_MNT
echo bar > $SCRATCH_MNT/foo
sync
echo 0 25165824 error | dmsetup reload foo
dmsetup resume foo
ls -alF $SCRATCH_MNT
touch $SCRATCH_MNT/1
ls -alF $SCRATCH_MNT
sleep 35
echo 0 25165824 linear $SCRATCH_DEV 0 | dmsetup reload foo
dmsetup resume foo
sleep 1
umount $SCRATCH_MNT
btrfsck /dev/mapper/foo
dmsetup remove foo
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
We need a barrir before calling waitqueue_active otherwise we will miss
wakeups. So in places that do atomic_dec(); then atomic_read() use
atomic_dec_return() which imply a memory barrier (see memory-barriers.txt)
and then add an explicit memory barrier everywhere else that need them.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Commit a168650c introduced a waiting mechanism to prevent busy waiting in
btrfs_run_delayed_refs. This can deadlock with btrfs_run_ordered_operations,
where a tree_mod_seq is held while waiting for the io to complete, while
the end_io calls btrfs_run_delayed_refs.
This whole mechanism is unnecessary. If not enough runnable refs are
available to satisfy count, just return as count is more like a guideline
than a strict requirement.
In case we have to run all refs, commit transaction makes sure that no
other threads are working in the transaction anymore, so we just assert
here that no refs are blocked.
Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Pull second vfs pile from Al Viro:
"The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the
deadlock reproduced by xfstests 068), symlink and hardlink restriction
patches, plus assorted cleanups and fixes.
Note that another fsfreeze deadlock (emergency thaw one) is *not*
dealt with - the series by Fernando conflicts a lot with Jan's, breaks
userland ABI (FIFREEZE semantics gets changed) and trades the deadlock
for massive vfsmount leak; this is going to be handled next cycle.
There probably will be another pull request, but that stuff won't be
in it."
Fix up trivial conflicts due to unrelated changes next to each other in
drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c}
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits)
delousing target_core_file a bit
Documentation: Correct s_umount state for freeze_fs/unfreeze_fs
fs: Remove old freezing mechanism
ext2: Implement freezing
btrfs: Convert to new freezing mechanism
nilfs2: Convert to new freezing mechanism
ntfs: Convert to new freezing mechanism
fuse: Convert to new freezing mechanism
gfs2: Convert to new freezing mechanism
ocfs2: Convert to new freezing mechanism
xfs: Convert to new freezing code
ext4: Convert to new freezing mechanism
fs: Protect write paths by sb_start_write - sb_end_write
fs: Skip atime update on frozen filesystem
fs: Add freezing handling to mnt_want_write() / mnt_drop_write()
fs: Improve filesystem freezing handling
switch the protection of percpu_counter list to spinlock
nfsd: Push mnt_want_write() outside of i_mutex
btrfs: Push mnt_want_write() outside of i_mutex
fat: Push mnt_want_write() outside of i_mutex
...
We convert btrfs_file_aio_write() to use new freeze check. We also add proper
freeze protection to btrfs_page_mkwrite(). We also add freeze protection to
the transaction mechanism to avoid starting transactions on frozen filesystem.
At minimum this is necessary to stop iput() of unlinked file to change frozen
filesystem during truncation.
Checks in cleaner_kthread() and transaction_kthread() can be safely removed
since btrfs_freeze() will lock the mutexes and thus block the threads (and they
shouldn't have anything to do anyway).
CC: linux-btrfs@vger.kernel.org
CC: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use the generic printk_get_level() to search a message for a kern_level.
Add __printf to verify format and arguments. Fix a few messages that
had mismatches in format and arguments. Add #ifdef CONFIG_PRINTK blocks
to shrink the object size a bit when not using printk.
[akpm@linux-foundation.org: whitespace tweak]
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the kernel portion of btrfs send/receive
Conflicts:
fs/btrfs/Makefile
fs/btrfs/backref.h
fs/btrfs/ctree.c
fs/btrfs/ioctl.c
fs/btrfs/ioctl.h
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
This patch introduces uuids for subvolumes. Each
subvolume has it's own uuid. In case it was snapshotted,
it also contains parent_uuid. In case it was received,
it also contains received_uuid.
It also introduces subvolume ctime/otime/stime/rtime. The
first two are comparable to the times found in inodes. otime
is the origin/creation time and ctime is the change time.
stime/rtime are only valid on received subvolumes.
stime is the time of the subvolume when it was
sent. rtime is the time of the subvolume when it was
received.
Additionally to the times, we have a transid for each
time. They are updated at the same place as the times.
btrfs receive uses stransid and rtransid to find out
if a received subvolume changed in the meantime.
If an older kernel mounts a filesystem with the
extented fields, all fields become invalid. The next
mount with a new kernel will detect this and reset the
fields.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Reviewed-by: David Sterba <dave@jikos.cz>
Reviewed-by: Arne Jansen <sensille@gmx.net>
Reviewed-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Reviewed-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
From btree_read_extent_buffer_pages(), currently repair_io_failure()
can be called with mirror_num being zero when submit_one_bio() returned
an error before. This used to cause a BUG_ON(!mirror_num) in
repair_io_failure() and indeed this is not a case that needs the I/O
repair code to rewrite disk blocks.
This commit prevents calling repair_io_failure() in this case and thus
avoids the BUG_ON() and malfunction.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
There used to be a BUG_ON(ret) there before EH patch (79787eaa) went in.
Bail out with EINVAL.
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Init the quota tree along with the others on open_ctree
and close_ctree. Add the quota tree to the list of well
known trees in btrfs_read_fs_root_no_name.
Signed-off-by: Arne Jansen <sensille@gmx.net>
We've got two mechanisms both required for reliable backref resolving (tree
mod log and holding back delayed refs). You cannot make use of one without
the other. So instead of requiring the user of this mechanism to setup both
correctly, we join them into a single interface.
Additionally, we stop inserting non-blockers into fs_info->tree_mod_seq_list
as we did before, which was of no value.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Pull btrfs updates from Chris Mason:
"I held off on my rc5 pull because I hit an oops during log recovery
after a crash. I wanted to make sure it wasn't a regression because
we have some logging fixes in here.
It turns out that a commit during the merge window just made it much
more likely to trigger directory logging instead of full commits,
which exposed an old bug.
The new backref walking code got some additional fixes. This should
be the final set of them.
Josef fixed up a corner where our O_DIRECT writes and buffered reads
could expose old file contents (not stale, just not the most recent).
He and Liu Bo fixed crashes during tree log recover as well.
Ilya fixed errors while we resume disk balancing operations on
readonly mounts."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: run delayed directory updates during log replay
Btrfs: hold a ref on the inode during writepages
Btrfs: fix tree log remove space corner case
Btrfs: fix wrong check during log recovery
Btrfs: use _IOR for BTRFS_IOC_SUBVOL_GETFLAGS
Btrfs: resume balance on rw (re)mounts properly
Btrfs: restore restriper state on all mounts
Btrfs: fix dio write vs buffered read race
Btrfs: don't count I/O statistic read errors for missing devices
Btrfs: resolve tree mod log locking issue in btrfs_next_leaf
Btrfs: fix tree mod log rewind of ADD operations
Btrfs: leave critical region in btrfs_find_all_roots as soon as possible
Btrfs: always put insert_ptr modifications into the tree mod log
Btrfs: fix tree mod log for root replacements at leaf level
Btrfs: support root level changes in __resolve_indirect_ref
Btrfs: avoid waiting for delayed refs when we must not
This introduces btrfs_resume_balance_async(), which, given that
restriper state was recovered earlier by btrfs_recover_balance(),
resumes balance in btrfs-balance kthread.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Fix a bug that triggered asserts in btrfs_balance() in both normal and
resume modes -- restriper state was not properly restored on read-only
mounts. This factors out resuming code from btrfs_restore_balance(),
which is now also called earlier in the mount sequence to avoid the
problem of some early writes getting the old profile.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Pull btrfs fixes from Chris Mason:
"This is a small pull with btrfs fixes. The biggest of the bunch is
another fix for the new backref walking code.
We're still hammering out one btrfs dio vs buffered reads problem, but
that one will have to wait for the next rc."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: delay iput with async extents
Btrfs: add a missing spin_lock
Btrfs: don't assume to be on the correct extent in add_all_parents
Btrfs: introduce btrfs_next_old_item
When fixing up the locking in the delayed ref destruction work I accidently
broke the locking myself ;(. Add back a spin_lock that should be there and
we are now all set. Thanks,
Btrfs: add a missing spin_lock
When fixing up the locking in the delayed ref destruction work I accidently
broke the locking myself ;(. Add back a spin_lock that should be there and
we are now all set. Thanks,
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Pull btrfs update from Chris Mason:
"The dates look like I had to rebase this morning because there was a
compiler warning for a printk arg that I had missed earlier.
These are all fixes, including one to prevent using stale pointers for
device names, and lots of fixes around transaction abort cleanups
(Josef, Liu Bo).
Jan Schmidt also sent in a number of fixes for the new reference
number tracking code.
Liu Bo beat me to updating the MAINTAINERS file. Since he thought to
also fix the git url, I kept his commit."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (24 commits)
Btrfs: update MAINTAINERS info for BTRFS FILE SYSTEM
Btrfs: destroy the items of the delayed inodes in error handling routine
Btrfs: make sure that we've made everything in pinned tree clean
Btrfs: avoid memory leak of extent state in error handling routine
Btrfs: do not resize a seeding device
Btrfs: fix missing inherited flag in rename
Btrfs: fix incompat flags setting
Btrfs: fix defrag regression
Btrfs: call filemap_fdatawrite twice for compression
Btrfs: keep inode pinned when compressing writes
Btrfs: implement ->show_devname
Btrfs: use rcu to protect device->name
Btrfs: unlock everything properly in the error case for nocow
Btrfs: fix btrfs_destroy_marked_extents
Btrfs: abort the transaction if the commit fails
Btrfs: wake up transaction waiters when aborting a transaction
Btrfs: fix locking in btrfs_destroy_delayed_refs
Btrfs: pass locked_page into extent_clear_unlock_delalloc if theres an error
Btrfs: fix race in tree mod log addition
Btrfs: add btrfs_next_old_leaf
...
the items of the delayed inodes were forgotten to be freed, this patch
fixes it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Since we have two trees for recording pinned extents, we need to go through
both of them to make sure that we've done everything clean.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We've forgotten to clear extent states in pinned tree, which will results in
space counter mismatch and memory leak:
WARNING: at fs/btrfs/extent-tree.c:7537 btrfs_free_block_groups+0x1f3/0x2e0 [btrfs]()
...
space_info 2 has 8380416 free, is not full
space_info total=12582912, used=4096, pinned=4096, reserved=0, may_use=0, readonly=4194304
btrfs state leak: start 29364224 end 29376511 state 1 in tree ffff880075f20090 refs 1
...
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Al pointed out that we can just toss out the old name on a device and add a
new one arbitrarily, so anybody who uses device->name in printk could
possibly use free'd memory. Instead of adding locking around all of this he
suggested doing it with RCU, so I've introduced a struct rcu_string that
does just that and have gone through and protected all accesses to
device->name that aren't under the uuid_mutex with rcu_read_lock(). This
protects us and I will use it for dealing with removing the device that we
used to mount the file system in a later patch. Thanks,
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <josef@redhat.com>
So we're forcing the eb's to have their ref count set to 1 so invalidatepage
works but this breaks lots of things, for example root nodes, and is just
plain wrong, we don't need to just evict all of this stuff. Also drop the
invalidatepage altogether and add a page_cache_release(). With this patch
we no longer hang when trying to access the root nodes after an aborted
transaction and we no longer leak memory. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
I was getting lots of hung tasks and a NULL pointer dereference because we
are not cleaning up the transaction properly when it aborts. First we need
to reset the running_transaction to NULL so we don't get a bad dereference
for any start_transaction callers after this. Also we cannot rely on
waitqueue_active() since it's just a list_empty(), so just call wake_up()
directly since that will do the barrier for us and such. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
The transaction abort stuff was throwing warnings from the list debugging
code because we do a list_del_init outside of the delayed_refs spin lock.
The delayed refs locking makes baby Jesus cry so it's not hard to get wrong,
but we need to take the ref head mutex to make sure it's not being processed
currently, and so if it is we need to drop the spin lock and then take and
drop the mutex and do the search again. If we can take the mutex then we
can safely remove the head from the list and carry on. Now when the
transaction aborts I don't get the list debugging warnings. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Pull btrfs updates from Chris Mason:
"This includes a fairly large change from Josef around data writeback
completion. Before, the writeback wasn't completed until the metadata
insertions for the extent were done, and this made for fairly large
latency spikes on the last page of each ordered extent.
We already had a separate mechanism for tracking pending metadata
insertions, so Josef just needed to tweak things a little to end
writeback earlier on the page. Overall it makes us much friendly to
memory reclaim and lowers latencies quite a lot for synchronous IO.
Jan Schmidt has finished some background work required to track btree
blocks as they go through changes in ownership. It's the missing
piece he needed for both btrfs send/receive and subvolume quotas.
Neither of those are ready yet, but the new tracking code is included
here. Most of the time, the new code is off. It is only used by
scrub and other backref walkers.
Stefan Behrens has added io failure tracking. This includes counters
for which drives are causing the most trouble so the admin (or an
automated tool) can choose to kick them out. We're tracking IO
errors, crc errors, and generation checks we do on each metadata
block.
RAID5/6 did miss the cut this time because I'm having trouble with
corruptions. I'll nail it down next week and post as a beta testing
before 3.6"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (58 commits)
Btrfs: fix tree mod log rewinded level and rewinding of moved keys
Btrfs: fix tree mod log del_ptr
Btrfs: add tree_mod_dont_log helper
Btrfs: add missing spin_lock for insertion into tree mod log
Btrfs: add inodes before dropping the extent lock in find_all_leafs
Btrfs: use delayed ref sequence numbers for all fs-tree updates
Btrfs: fix false positive in check-integrity on unmount
Btrfs: fix runtime warning in check-integrity check data mode
Btrfs: set ioprio of scrub readahead to idle
Btrfs: fix return code in drop_objectid_items
Btrfs: check to see if the inode is in the log before fsyncing
Btrfs: return value of btrfs_read_buffer is checked correctly
Btrfs: read device stats on mount, write modified ones during commit
Btrfs: add ioctl to get and reset the device stats
Btrfs: add device counters for detected IO and checksum errors
btrfs: Drop unused function btrfs_abort_devices()
Btrfs: fix the same inode id problem when doing auto defragment
Btrfs: fall back to non-inline if we don't have enough space
Btrfs: fix how we deal with the orphan block rsv
Btrfs: convert the inode bit field to use the actual bit operations
...
The device statistics are written into the device tree with each
transaction commit. Only modified statistics are written.
When a filesystem is mounted, the device statistics for each involved
device are read from the device tree and used to initialize the
counters.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
The goal is to detect when drives start to get an increased error rate,
when drives should be replaced soon. Therefore statistic counters are
added that count IO errors (read, write and flush). Additionally, the
software detected errors like checksum errors and corrupted blocks are
counted.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
1) This function is not used anywhere.
2) Using the blk_abort_queue() to abort the queue seems not correct.
blk_abort_queue() is used for timeout handling (block/blk-timeout.c).
Cc: Chris Mason <chris.mason@oracle.com>
Cc: linux-btrfs@vger.kernel.org
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Asias He <asias@redhat.com>
Ceph was hitting this race where we would remove an inode from the per-root
orphan list before we would release the space we had reserved for the inode.
We actually don't need a list or anything, we just need to make sure the
root doesn't try to free up the orphan reserve until after the inodes have
released their reservations. So use an atomic counter instead of a list on
the root and only decrement the counter after we've released our
reservation. I've tested this as well as several others and we no longer
see the warnings that you would see while running ceph. Thanks,
Btrfs: fix how we deal with the orphan block rsv
Ceph was hitting this race where we would remove an inode from the per-root
orphan list before we would release the space we had reserved for the inode.
We actually don't need a list or anything, we just need to make sure the
root doesn't try to free up the orphan reserve until after the inodes have
released their reservations. So use an atomic counter instead of a list on
the root and only decrement the counter after we've released our
reservation. I've tested this as well as several others and we no longer
see the warnings that you would see while running ceph. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Miao pointed this out while I was working on an orphan problem that messing
with a bitfield where different ranges are protected by different locks
doesn't work out right. Turns out we've been doing this forever where we
have different parts of the bit field protected by either no lock at all or
different locks which could cause all sorts of weird problems including the
issue I was hitting. So instead make a runtime_flags thing that we use the
normal bit operations on that are all atomic so we can keep having our
no/different locking for the different flags and then make force_compress
it's own thing so it can be treated normally. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
We noticed that the ordered extent completion doesn't really rely on having
a page and that it could be done independantly of ending the writeback on a
page. This patch makes us not do the threaded endio stuff for normal
buffered writes and direct writes so we can end page writeback as soon as
possible (in irq context) and only start threads to do the ordered work when
it is actually done. Compression needs to be reworked some to take
advantage of this as well, but atm it has to do a find_get_page in its endio
handler so it must be done in its own thread. This makes direct writes
quite a bit faster. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Three callers of btrfs_free_tree_block or btrfs_alloc_tree_block passed
parameter for_cow = 1. In fact, these two functions should never mark
their tree modification operations as for_cow, because they can change
the number of blocks referenced by a tree.
Hence, we remove the extra for_cow parameter from these functions and
make them pass a zero down.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Pull trivial updates from Jiri Kosina:
"As usual, it's mostly typo fixes, redundant code elimination and some
documentation updates."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits)
edac, mips: don't change code that has been removed in edac/mips tree
xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer
lib: Change mail address of Oskar Schirmer
net: Change mail address of Oskar Schirmer
arm/m68k: Change mail address of Sebastian Hess
i2c: Change mail address of Oskar Schirmer
net: Fix tcp_build_and_update_options comment in struct tcp_sock
atomic64_32.h: fix parameter naming mismatch
Kconfig: replace "--- help ---" with "---help---"
c2port: fix bogus Kconfig "default no"
edac: Fix spelling errors.
qla1280: Remove redundant NULL check before release_firmware() call
remoteproc: remove redundant NULL check before release_firmware()
qla2xxx: Remove redundant NULL check before release_firmware() call.
aic94xx: Get rid of redundant NULL check before release_firmware() call
tehuti: delete redundant NULL check before release_firmware()
qlogic: get rid of a redundant test for NULL before call to release_firmware()
bna: remove redundant NULL test before release_firmware()
tg3: remove redundant NULL test before release_firmware() call
typhoon: get rid of redundant conditional before all to release_firmware()
...
verify_parent_transid needs to lock the extent range to make
sure no IO is underway, and so it can safely clear the
uptodate bits if our checks fail.
But, a few callers are using it with spinlocks held. Most
of the time, the generation numbers are going to match, and
we don't want to switch to a blocking lock just for the error
case. This adds an atomic flag to verify_parent_transid,
and changes it to return EAGAIN if it needs to block to
properly verifiy things.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
A user reported a panic where we were trying to fix a bad mirror but the
mirror number we were giving was 0, which is invalid. This is because we
don't do the transid verification until after the read, so as far as the
read code is concerned the read was a success. So instead store the mirror
we read from so that if there is some failure post read we know which mirror
to try next and which mirror needs to be fixed if we find a good copy of the
block. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Our code is not ready to cope with a sectorsize that's not equal to PAGE_SIZE.
It will lead to hanging-on while writing something.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Merge with latest Linus' tree, as I have incoming patches
that fix code that is newer than current HEAD of for-next.
Conflicts:
drivers/net/ethernet/realtek/r8169.c
Dave Sterba had put in patches to look for mixed data/metadata groups
with metadata bigger than 4KB. But these ended up in the wrong place
and it wasn't testing the feature flag correctly.
This updates the tests to make sure our sizes are matching
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Btrfs puts the filesystem metadata into its own address space, and
somehow the block device address space isn't getting onto disk properly
before a mount. The end result is that a loop of mkfs and mounting the
filesystem will sometimes find stale or incorrect data.
This commit should fix it by sprinkling fdatawrites and invalidate_bdev
calls around. This is a short term measure to make sure it is fixed.
The block devices really should be flushed and cleaned up higher in the
stack.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
With support for bigger metadata blocks, we must avoid mounting a
filesystem with different block size for mixed block groups, this causes
corruption (found by xfstests/083).
Signed-off-by: David Sterba <dsterba@suse.cz>
Since we need to read and write extent buffers in their entirety we can't use
the normal bio_readpage_error stuff since it only works on a per page basis. So
instead make it so that if we see an io error in endio we just mark the eb as
having an IO error and then in btree_read_extent_buffer_pages we will manually
try other mirrors and then overwrite the bad mirror if we find a good copy.
This works with larger than page size blocks. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The metadata write IO completion code is now simple enough that we
don't need the threaded helpers anymore.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This patch simplifies how we track our extent buffers. Previously we could exit
writepages with only having written half of an extent buffer, which meant we had
to track the state of the pages and the state of the extent buffers differently.
Now we only read in entire extent buffers and write out entire extent buffers,
this allows us to simply set bits in our bflags to indicate the state of the eb
and we no longer have to do things like track uptodate with our iotree. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Because btrfs cow's we can end up with extent buffers that are no longer
necessary just sitting around in memory. So instead of evicting these pages, we
could end up evicting things we actually care about. Thus we have
free_extent_buffer_stale for use when we are freeing tree blocks. This will
make it so that the ref for the eb being in the radix tree is dropped as soon as
possible and then is freed when the refcount hits 0 instead of waiting to be
released by releasepage. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
We spend a lot of time looking up extent buffers from pages when we could just
store the pointer to the eb the page is associated with in page->private. This
patch does just that, and it makes things a little simpler and reduces a bit of
CPU overhead involved with doing metadata IO. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
A few years ago the btrfs code to support blocks lager than
the page size was disabled to fix a few corner cases in the
page cache handling. This fixes the code to properly support
large metadata blocks again.
Since current kernels will crash early and often with larger
metadata blocks, this adds an incompat bit so that older kernels
can't mount it.
This also does away with different blocksizes for nodes and leaves.
You get a single block size for all tree blocks.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When a filesystem got aborted due do error, transaction_kthread() will
busyloop. Fix it by going to sleep in that case as well. Maybe we should
just stop transaction_kthread() when filesystem is aborted but that would be
more complex.
Signed-off-by: Jan Kara <jack@suse.cz>
btrfs currently handles most errors with BUG_ON. This patch is a work-in-
progress but aims to handle most errors other than internal logic
errors and ENOMEM more gracefully.
This iteration prevents most crashes but can run into lockups with
the page lock on occasion when the timing "works out."
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
lock_extent and unlock_extent are always called with GFP_NOFS, drop the
argument and use GFP_NOFS consistently.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
This pushes failures from the submit_bio_hook callbacks,
btrfs_submit_bio_hook and btree_submit_bio_hook into the callers, including
callers of submit_one_bio where it catches the failures with BUG_ON.
It also pushes up through the ->readpage_io_failed_hook to
end_bio_extent_writepage where the error is already caught with BUG_ON.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
find_and_setup_root BUGs when it encounters an error from
btrfs_find_last_root, which can occur if a path can't be allocated.
This patch pushes it up to its callers where it is already handled.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
The only error condition in clean_tree_block is an accounting bug.
Returning without modifying dirty_metadata_bytes and as if the cleaning
as been performed may cause problems later so it should panic instead.
It should probably be a BUG_ON but we have btrfs_panic now.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Quoth Chris:
"This is later than I wanted because I got backed up running through
btrfs bugs from the Oracle QA teams. But they are all bug fixes that
we've queued and tested since rc1.
Nothing in particular stands out, this just reflects bug fixing and QA
done in parallel by all the btrfs developers. The most user visible
of these is:
Btrfs: clear the extent uptodate bits during parent transid failures
Because that helps deal with out of date drives (say an iscsi disk
that has gone away and come back). The old code wasn't always
properly retrying the other mirror for this type of failure."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (24 commits)
Btrfs: fix compiler warnings on 32 bit systems
Btrfs: increase the global block reserve estimates
Btrfs: clear the extent uptodate bits during parent transid failures
Btrfs: add extra sanity checks on the path names in btrfs_mksubvol
Btrfs: make sure we update latest_bdev
Btrfs: improve error handling for btrfs_insert_dir_item callers
Btrfs: be less strict on finding next node in clear_extent_bit
Btrfs: fix a bug on overcommit stuff
Btrfs: kick out redundant stuff in convert_extent_bit
Btrfs: skip states when they does not contain bits to clear
Btrfs: check return value of lookup_extent_mapping() correctly
Btrfs: fix deadlock on page lock when doing auto-defragment
Btrfs: fix return value check of extent_io_ops
btrfs: honor umask when creating subvol root
btrfs: silence warning in raid array setup
btrfs: fix structs where bitfields and spinlock/atomic share 8B word
btrfs: delalloc for page dirtied out-of-band in fixup worker
Btrfs: fix memory leak in load_free_space_cache()
btrfs: don't check DUP chunks twice
Btrfs: fix trim 0 bytes after a device delete
...
When we are setting up the mount, we close all the
devices that were not actually part of the metadata we found.
But, we don't make sure that one of those devices wasn't
fs_devices->latest_bdev, which means we can do a use after free
on the one we closed.
This updates latest_bdev as it goes.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Gracefully fail when trying to mount a BTRFS file system that has a
sectorsize smaller than PAGE_SIZE.
On PPC it is possible to build a FS while using a 4k PAGE_SIZE kernel
then boot into a 64K PAGE_SIZE kernel. Presently open_ctree fails in an
endless loop and hangs the machine in this situation.
My debugging has show this Sector size < Page size to be a non trivial
situation and a graceful exit from the situation would be nice for the
time being.
Signed-off-by: Keith Mannthey <kmannth@us.ibm.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix reservations in btrfs_page_mkwrite
Btrfs: advance window_start if we're using a bitmap
btrfs: mask out gfp flags in releasepage
Btrfs: fix enospc error caused by wrong checks of the chunk
Btrfs: do not defrag a file partially
Btrfs: fix warning for 32-bit build of fs/btrfs/check-integrity.c
Btrfs: use cluster->window_start when allocating from a cluster bitmap
Btrfs: Check for NULL page in extent_range_uptodate
btrfs: Fix busyloops in transaction waiting code
Btrfs: make sure a bitmap has enough bytes
Btrfs: fix uninit warning in backref.c
btree_releasepage is a callback and can be passed unknown gfp flags and then
they may end up in kmem_cache_alloc called from alloc_extent_state, slab
allocator will BUG_ON when there is HIGHMEM or DMA32 flag set.
This may happen when btrfs is mounted from a loop device, which masks out
__GFP_IO flag. The check in try_release_extent_state
3399 if ((mask & GFP_NOFS) == GFP_NOFS)
3400 mask = GFP_NOFS;
will not work and passes unfiltered flags further resulting in crash at
mm/slab.c:2963
[<000000000024ae4c>] cache_alloc_refill+0x3b4/0x5c8
[<000000000024c810>] kmem_cache_alloc+0x204/0x294
[<00000000001fd3c2>] mempool_alloc+0x52/0x170
[<000003c000ced0b0>] alloc_extent_state+0x40/0xd4 [btrfs]
[<000003c000cee5ae>] __clear_extent_bit+0x38a/0x4cc [btrfs]
[<000003c000cee78c>] try_release_extent_state+0x9c/0xd4 [btrfs]
[<000003c000cc4c66>] btree_releasepage+0x7e/0xd0 [btrfs]
[<0000000000210d84>] shrink_page_list+0x6a0/0x724
[<0000000000211394>] shrink_inactive_list+0x230/0x578
[<0000000000211bb8>] shrink_list+0x6c/0x120
[<0000000000211e4e>] shrink_zone+0x1e2/0x228
[<0000000000211f24>] shrink_zones+0x90/0x254
[<0000000000213410>] do_try_to_free_pages+0xac/0x420
[<0000000000213ae0>] try_to_free_pages+0x13c/0x1b0
[<0000000000204e6c>] __alloc_pages_nodemask+0x5b4/0x9a8
[<00000000001fb04a>] grab_cache_page_write_begin+0x7e/0xe8
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
* 'btrfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
btrfs: take allocation of ->tree_root into open_ctree()
btrfs: let ->s_fs_info point to fs_info, not root...
btrfs: consolidate failure exits in btrfs_mount() a bit
btrfs: make free_fs_info() call ->kill_sb() unconditional
btrfs: merge free_fs_info() calls on fill_super failures
btrfs: kill pointless reassignment of ->s_fs_info in btrfs_fill_super()
btrfs: make open_ctree() return int
btrfs: sanitizing ->fs_info, part 5
btrfs: sanitizing ->fs_info, part 4
btrfs: sanitizing ->fs_info, part 3
btrfs: sanitizing ->fs_info, part 2
btrfs: sanitizing ->fs_info, part 1
btrfs: fix a deadlock in btrfs_scan_one_device()
btrfs: fix mount/umount race
btrfs: get ->kill_sb() of its own
btrfs: preparation to fixing mount/umount race
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (62 commits)
Btrfs: use larger system chunks
Btrfs: add a delalloc mutex to inodes for delalloc reservations
Btrfs: space leak tracepoints
Btrfs: protect orphan block rsv with spin_lock
Btrfs: add allocator tracepoints
Btrfs: don't call btrfs_throttle in file write
Btrfs: release space on error in page_mkwrite
Btrfs: fix btrfsck error 400 when truncating a compressed
Btrfs: do not use btrfs_end_transaction_throttle everywhere
Btrfs: add balance progress reporting
Btrfs: allow for resuming restriper after it was paused
Btrfs: allow for canceling restriper
Btrfs: allow for pausing restriper
Btrfs: add skip_balance mount option
Btrfs: recover balance on mount
Btrfs: save balance parameters to disk
Btrfs: soft profile changing mode (aka soft convert)
Btrfs: implement online profile changing
Btrfs: do not reduce profile in do_chunk_alloc()
Btrfs: virtual address space subset filter
...
Fix up trivial conflict in fs/btrfs/ioctl.c due to the use of the new
mnt_drop_write_file() helper.
Implement an ioctl for canceling restriper. Currently we wait until
relocation of the current block group is finished, in future this can be
done by triggering a commit. Balance item is deleted and no memory
about the interrupted balance is kept.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Implement an ioctl for pausing restriper. This pauses the relocation,
but balance is still considered to be "in progress": balance item is
not deleted, other volume operations cannot be started, etc. If paused
in the middle of profile changing operation we will continue making
allocations with the target profile.
Add a hook to close_ctree() to pause restriper and free its data
structures on unmount. (It's safe to unmount when restriper is in
"paused" state, we will resume with the same parameters on the next
mount)
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
On mount, if balance item is found, resume balance in a separate
kernel thread.
Try to be smart to continue roughly where previous balance (or convert)
was interrupted. For chunk types that were being converted to some
profile we turn on soft convert, in case of a simple balance we turn on
usage filter and relocate only less-than-90%-full chunks of that type.
These are just heuristics but they help quite a bit, and can be improved
in future.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add basic restriper infrastructure: extended balancing ioctl and all
related ioctl data structures, add data structure for tracking
restriper's state to fs_info, etc. The semantics of the old balancing
ioctl are fully preserved.
Explicitly disallow any volume operations when balance is in progress.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This patch adds a lightweight sync migrate operation MIGRATE_SYNC_LIGHT
mode that avoids writing back pages to backing storage. Async compaction
maps to MIGRATE_ASYNC while sync compaction maps to MIGRATE_SYNC_LIGHT.
For other migrate_pages users such as memory hotplug, MIGRATE_SYNC is
used.
This avoids sync compaction stalling for an excessive length of time,
particularly when copying files to a USB stick where there might be a
large number of dirty pages backed by a filesystem that does not support
->writepages.
[aarcange@redhat.com: This patch is heavily based on Andrea's work]
[akpm@linux-foundation.org: fix fs/nfs/write.c build]
[akpm@linux-foundation.org: fix fs/btrfs/disk-io.c build]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andy Isaacson <adi@hexapodia.org>
Cc: Nai Xia <nai.xia@gmail.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Asynchronous compaction is used when allocating transparent hugepages to
avoid blocking for long periods of time. Due to reports of stalling,
there was a debate on disabling synchronous compaction but this severely
impacted allocation success rates. Part of the reason was that many dirty
pages are skipped in asynchronous compaction by the following check;
if (PageDirty(page) && !sync &&
mapping->a_ops->migratepage != migrate_page)
rc = -EBUSY;
This skips over all mapping aops using buffer_migrate_page() even though
it is possible to migrate some of these pages without blocking. This
patch updates the ->migratepage callback with a "sync" parameter. It is
the responsibility of the callback to fail gracefully if migration would
block.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andy Isaacson <adi@hexapodia.org>
Cc: Nai Xia <nai.xia@gmail.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The correct lock order is uuid_mutex -> volume_mutex -> chunk_mutex,
but when we mount a filesystem which has backing seed devices, we have
this lock chain:
open_ctree()
lock(chunk_mutex);
read_chunk_tree();
read_one_dev();
open_seed_devices();
lock(uuid_mutex);
and then we hit a lockdep splat.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
the latter can be obtained from the former (by looking as ->tree_root)
just as cheaply as we currently are doing the other way round.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It returns either ERR_PTR(-ve) or sb->s_fs_info. The latter can
be found by caller just as well, TYVM, no need to return it. Just
return -ve or 0...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
close_ctree() uses a weird mix of accesses to root->fs_info and
its value at the beginning of function stored in local variable.
Since ->fs_info *never* changes, let's just use the local variable
to avoid confusion.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
A new helper: btrfs_alloc_root(fs_info); allocates btrfs_root
and sets ->fs_info. All places allocating the suckers converted
to it. At that point we *never* reassign ->fs_info of btrfs_root;
it's set before anyone sees the address of newly allocated
struct btrfs_root and never assigned anywhere else.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
move assignments to ->fs_info in open_ctree() up, to the place
just after the original allocations. Assignment for tree_root
becomes a no-op - we'd obtained fs_info from tree_root->fs_info
in the first place.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We need fs_info and root to live until the moment when the victim
superblock leaves the list, so we need to postpone free_fs_info()
until after ->put_super(). The call is buried in close_ctree(),
though, so we need to lift it into the callers (including
btrfs_put_super()) first.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a for_cow parameter to add_delayed_*_ref and pass the appropriate value
from every call site. The for_cow parameter will later on be used to
determine if a ref will change anything with respect to qgroups.
Delayed refs coming from relocation are always counted as for_cow, as they
don't change subvol quota.
Also pass in the fs_info for later use.
btrfs_find_all_roots() will use this as an optimization, as changes that are
for_cow will not change anything with respect to which root points to a
certain leaf. Thus, we don't need to add the current sequence number to
those delayed refs.
Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
* master: (848 commits)
SELinux: Fix RCU deref check warning in sel_netport_insert()
binary_sysctl(): fix memory leak
mm/vmalloc.c: remove static declaration of va from __get_vm_area_node
ipmi_watchdog: restore settings when BMC reset
oom: fix integer overflow of points in oom_badness
memcg: keep root group unchanged if creation fails
nilfs2: potential integer overflow in nilfs_ioctl_clean_segments()
nilfs2: unbreak compat ioctl
cpusets: stall when updating mems_allowed for mempolicy or disjoint nodemask
evm: prevent racing during tfm allocation
evm: key must be set once during initialization
mmc: vub300: fix type of firmware_rom_wait_states module parameter
Revert "mmc: enable runtime PM by default"
mmc: sdhci: remove "state" argument from sdhci_suspend_host
x86, dumpstack: Fix code bytes breakage due to missing KERN_CONT
IB/qib: Correct sense on freectxts increment and decrement
RDMA/cma: Verify private data length
cgroups: fix a css_set not found bug in cgroup_attach_proc
oprofile: Fix uninitialized memory access when writing to writing to oprofilefs
Revert "xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel"
...
Conflicts:
kernel/cgroup_freezer.c
This is the last part of the patch series. It modifies the btrfs
code to use the integrity check module if configured to do so
with the define BTRFS_FS_CHECK_INTEGRITY. If this define is not set,
the only effective change is that code is added that handles the
mount option to activate the integrity check. If the mount option is
set and the define BTRFS_FS_CHECK_INTEGRITY is not set, that code
complains in the log and the mount fails with EINVAL.
Add the mount option to activate the usage of the integrity check
code.
Add invocation of btrfs integrity check code init and cleanup
function on mount and umount, respectively.
Add hook to call btrfs integrity check code version of
submit_bh/submit_bio.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: unplug every once and a while
Btrfs: deal with NULL srv_rsv in the delalloc inode reservation code
Btrfs: only set cache_generation if we setup the block group
Btrfs: don't panic if orphan item already exists
Btrfs: fix leaked space in truncate
Btrfs: fix how we do delalloc reservations and how we free reservations on error
Btrfs: deal with enospc from dirtying inodes properly
Btrfs: fix num_workers_starting bug and other bugs in async thread
BTRFS: Establish i_ops before calling d_instantiate
Btrfs: add a cond_resched() into the worker loop
Btrfs: fix ctime update of on-disk inode
btrfs: keep orphans for subvolume deletion
Btrfs: fix inaccurate available space on raid0 profile
Btrfs: fix wrong disk space information of the files
Btrfs: fix wrong i_size when truncating a file to a larger size
Btrfs: fix btrfs_end_bio to deal with write errors to a single mirror
* 'for-linus-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: lower the dirty balance poll interval
Al pointed out we have some random problems with the way we account for
num_workers_starting in the async thread stuff. First of all we need to make
sure to decrement num_workers_starting if we fail to start the worker, so make
__btrfs_start_workers do this. Also fix __btrfs_start_workers so that it
doesn't call btrfs_stop_workers(), there is no point in stopping everybody if we
failed to create a worker. Also check_pending_worker_creates needs to call
__btrfs_start_work in it's work function since it already increments
num_workers_starting.
People only start one worker at a time, so get rid of the num_workers argument
everywhere, and make btrfs_queue_worker a void since it will always succeed.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
* 'pm-freezer' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc: (24 commits)
freezer: fix wait_event_freezable/__thaw_task races
freezer: kill unused set_freezable_with_signal()
dmatest: don't use set_freezable_with_signal()
usb_storage: don't use set_freezable_with_signal()
freezer: remove unused @sig_only from freeze_task()
freezer: use lock_task_sighand() in fake_signal_wake_up()
freezer: restructure __refrigerator()
freezer: fix set_freezable[_with_signal]() race
freezer: remove should_send_signal() and update frozen()
freezer: remove now unused TIF_FREEZE
freezer: make freezing() test freeze conditions in effect instead of TIF_FREEZE
cgroup_freezer: prepare for removal of TIF_FREEZE
freezer: clean up freeze_processes() failure path
freezer: kill PF_FREEZING
freezer: test freezable conditions while holding freezer_lock
freezer: make freezing indicate freeze condition in effect
freezer: use dedicated lock instead of task_lock() + memory barrier
freezer: don't distinguish nosig tasks on thaw
freezer: remove racy clear_freeze_flag() and set PF_NOFREEZE on dead tasks
freezer: rename thaw_process() to __thaw_task() and simplify the implementation
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: remove free-space-cache.c WARN during log replay
Btrfs: sectorsize align offsets in fiemap
Btrfs: clear pages dirty for io and set them extent mapped
Btrfs: wait on caching if we're loading the free space cache
Btrfs: prefix resize related printks with btrfs:
btrfs: fix stat blocks accounting
Btrfs: avoid unnecessary bitmap search for cluster setup
Btrfs: fix to search one more bitmap for cluster setup
btrfs: mirror_num should be int, not u64
btrfs: Fix up 32/64-bit compatibility for new ioctls
Btrfs: fix barrier flushes
Btrfs: fix tree corruption after multi-thread snapshots and inode_cache flush
There is no reason to export two functions for entering the
refrigerator. Calling refrigerator() instead of try_to_freeze()
doesn't save anything noticeable or removes any race condition.
* Rename refrigerator() to __refrigerator() and make it return bool
indicating whether it scheduled out for freezing.
* Update try_to_freeze() to return bool and relay the return value of
__refrigerator() if freezing().
* Convert all refrigerator() users to try_to_freeze().
* Update documentation accordingly.
* While at it, add might_sleep() to try_to_freeze().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Samuel Ortiz <samuel@sortiz.org>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: Christoph Hellwig <hch@infradead.org>
My previous patch introduced some u64 for failed_mirror variables, this one
makes it consistent again.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When btrfs is writing the super blocks, it send barrier flushes to make
sure writeback caching drives get all the metadata on disk in the
right order.
But, we have two bugs in the way these are sent down. When doing
full commits (not via the tree log), we are sending the barrier down
before the last super when it should be going down before the first.
In multi-device setups, we should be waiting for the barriers to
complete on all devices before writing any of the supers.
Both of these bugs can cause corruptions on power failures. We fix it
with some new code to send down empty barriers to all devices before
writing the first super.
Alexandre Oliva found the multi-device bug. Arne Jansen did the async
barrier loop.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Reported-by: Alexandre Oliva <oliva@lsd.ic.unicamp.br>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: rename the option to nospace_cache
Btrfs: handle bio_add_page failure gracefully in scrub
Btrfs: fix deadlock caused by the race between relocation
Btrfs: only map pages if we know we need them when reading the space cache
Btrfs: fix orphan backref nodes
Btrfs: Abstract similar code for btrfs_block_rsv_add{, _noflush}
Btrfs: fix unreleased path in btrfs_orphan_cleanup()
Btrfs: fix no reserved space for writing out inode cache
Btrfs: fix nocow when deleting the item
Btrfs: tweak the delayed inode reservations again
Btrfs: rework error handling in btrfs_mount()
Btrfs: close devices on all error paths in open_ctree()
Btrfs: avoid null dereference and leaks when bailing from open_ctree()
Btrfs: fix subvol_name leak on error in btrfs_mount()
Btrfs: fix memory leak in btrfs_parse_early_options()
Btrfs: fix our reservations for updating an inode when completing io
Btrfs: fix oops on NULL trans handle in btrfs_truncate
btrfs: fix double-free 'tree_root' in 'btrfs_mount()'
Fix a bug introduced by 7e662854 where we would leave devices busy on
certain error paths in open_ctree(). fs_info is guaranteed to be
non-NULL now so it's safe to dereference it on all error paths.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Fix bugs introduced by 6c41761f. Firstly, after failing to allocate any
of the tree roots (first 'goto fail' in open_ctree()) we would
dereference a NULL fs_info pointer in free_fs_info(). Secondly, after
failures from init_srcu_struct(), setup_bdi() and new_inode() we would
leak all earlier allocated roots: fs_info fields haven't been
initialized yet so free_fs_info() is rendered useless.
Fix this by initializing fs_info pointer and fs_info fields before any
allocations happen.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (114 commits)
Btrfs: check for a null fs root when writing to the backup root log
Btrfs: fix race during transaction joins
Btrfs: fix a potential btrfs_bio leak on scrub fixups
Btrfs: rename btrfs_bio multi -> bbio for consistency
Btrfs: stop leaking btrfs_bios on readahead
Btrfs: stop the readahead threads on failed mount
Btrfs: fix extent_buffer leak in the metadata IO error handling
Btrfs: fix the new inspection ioctls for 32 bit compat
Btrfs: fix delayed insertion reservation
Btrfs: ClearPageError during writepage and clean_tree_block
Btrfs: be smarter about committing the transaction in reserve_metadata_bytes
Btrfs: make a delayed_block_rsv for the delayed item insertion
Btrfs: add a log of past tree roots
btrfs: separate superblock items out of fs_info
Btrfs: use the global reserve when truncating the free space cache inode
Btrfs: release metadata from global reserve if we have to fallback for unlink
Btrfs: make sure to flush queued bios if write_cache_pages waits
Btrfs: fix extent pinning bugs in the tree log
Btrfs: make sure btrfs_remove_free_space doesn't leak EAGAIN
Btrfs: don't wait as long for more batches during SSD log commit
...
During log replay, can commit the transaction before the fs_root
pointers are setup, so we have to make sure they are not null before
trying to use them.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The scrub readahead branch brought in a new error handling hook,
but it was leaking extent_buffer references.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
I've been hitting warnings in use_block_rsv when running the delayed insertion
stuff. It's because we will readjust global block rsv based on what is in use,
which means we could end up discarding reservations that are for the delayed
insertion stuff. So instead create a seperate block rsv for the delayed
insertion stuff. This will also make it easier to debug problems with the
delayed insertion reservations since we will know that only the delayed
insertion code touches this block_rsv. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This takes some of the free space in the btrfs super block
to record information about most of the roots in the last four
commits.
It also adds a -o recovery to use the root history log when
we're not able to read the tree of tree roots, the extent
tree root, the device tree root or the csum root.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
fs_info has now ~9kb, more than fits into one page. This will cause
mount failure when memory is too fragmented. Top space consumers are
super block structures super_copy and super_for_commit, ~2.8kb each.
Allocate them dynamically. fs_info will be ~3.5kb. (measured on x86_64)
Add a wrapper for freeing fs_info and all of it's dynamically allocated
members.
Signed-off-by: David Sterba <dsterba@suse.cz>
write_cache_pages tries to build up a large bio to stuff down the pipe.
But if it needs to wait for a page lock, it needs to make sure and send
down any pending writes so we don't deadlock with anyone who has the
page lock and is waiting for writeback of things inside the bio.
Dave Sterba triggered this as a deadlock between the autodefrag code and
the extent write_cache_pages
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Replace remaining direct i_nlink updates with a new set_nlink()
updater function.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
One of the things that kills us is the fact that our ENOSPC reservations are
horribly over the top in most normal cases. There isn't too much that can be
done about this because when we are completely full we really need them to work
like this so we don't under reserve. However if there is plenty of unallocated
chunks on the disk we can use that to gauge how much we can overcommit. So this
patch adds chunk free space accounting so we always know how much unallocated
space we have. Then if we fail to make a reservation within our allocated
space, check to see if we can overcommit. In the normal flushing case (like
with delalloc metadata reservations) we'll take the free space and divide it by
2 if our metadata profile is setup for DUP or any of those, and then divide it
by 8 to make sure we don't overcommit too much. Then if we're in a non-flushing
case (we really need this reservation now!) we only limit ourselves to half of
the free space. This makes this fio test
[torrent]
filename=torrent-test
rw=randwrite
size=4g
ioengine=sync
directory=/mnt/btrfs-test
go from taking around 45 minutes to 10 seconds on my freshly formatted 3 TiB
file system. This doesn't seem to break my other enospc tests, but could really
use some more testing as this is a super scary change. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
In moving some enospc stuff around I noticed that when we unmount we are often
evicting the free space cache inodes before we do our last commit. This isn't
bad, but it makes us constantly have to re-read the inodes back. So instead
don't evict the cache until after we do our last commit, this will make things a
little less crappy and makes a future enospc change work properly. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
This adds the hooks needed for readahead. In the readpage_end_io_hook,
the extent state is checked for the EXTENT_READAHEAD flag. Only in this
case the readahead hook is called, to keep the impact on non-ra as low
as possible.
Additionally, a hook for a failed IO is added, otherwise readahead would
wait indefinitely for the extent to finish.
Changes for v2:
- eliminate race condition
Signed-off-by: Arne Jansen <sensille@gmx.net>
Add state information for readahead to btrfs_fs_info and btrfs_device
Changes v2:
- don't wait in radix_trees
- add own set of workers for readahead
Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Arne Jansen <sensille@gmx.net>
Add a READAHEAD extent buffer flag.
Add a function to trigger a read with this flag set.
Changes v2:
- use extent buffer flags instead of extent state flags
Changes v5:
- adapt to changed read_extent_buffer_pages interface
- don't return eb from reada_tree_block_flagged if it has CORRUPT flag set
Signed-off-by: Arne Jansen <sensille@gmx.net>
read_extent_buffer_pages currently has two modes, either trigger a read
without waiting for anything, or wait for the I/O to finish. The former
also bails when it's unable to lock the page. This patch now adds an
additional parameter to allow it to block on page lock, but don't wait
for completion.
Changes v5:
- merge the 2 wait parameters into one and define WAIT_NONE, WAIT_COMPLETE and
WAIT_PAGE_LOCK
Change v6:
- fix bug introduced in v5
Signed-off-by: Arne Jansen <sensille@gmx.net>
Currently, extent_read_full_page always assumes we are trying to read mirror
0, which generally is the best we can do. To add flexibility, pass it as a
parameter. This will be needed by scrub fixup code.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: make sure reserve_metadata_bytes doesn't leak out strange errors
Btrfs: use the commit_root for reading free_space_inode crcs
Btrfs: reduce extent_state lock contention for metadata
Btrfs: remove lockdep magic from btrfs_next_leaf
Btrfs: make a lockdep class for each root
Btrfs: switch the btrfs tree locks to reader/writer
Btrfs: fix deadlock when throttling transactions
Btrfs: stop using highmem for extent_buffers
Btrfs: fix BUG_ON() caused by ENOSPC when relocating space
Btrfs: tag pages for writeback in sync
Btrfs: fix enospc problems with delalloc
Btrfs: don't flush delalloc arbitrarily
Btrfs: use find_or_create_page instead of grab_cache_page
Btrfs: use a worker thread to do caching
Btrfs: fix how we merge extent states and deal with cached states
Btrfs: use the normal checksumming infrastructure for free space cache
Btrfs: serialize flushers in reserve_metadata_bytes
Btrfs: do transaction space reservation before joining the transaction
Btrfs: try to only do one btrfs_search_slot in do_setxattr
This patch was originally from Tejun Heo. lockdep complains about the btrfs
locking because we sometimes take btree locks from two different trees at the
same time. The current classes are based only on level in the btree, which
isn't enough information for lockdep to figure out if the lock is safe.
This patch makes a class for each type of tree, and lumps all the FS trees that
actually have files and directories into the same class.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The extent_buffers have a very complex interface where
we use HIGHMEM for metadata and try to cache a kmap mapping
to access the memory.
The next commit adds reader/writer locks, and concurrent use
of this kmap cache would make it even more complex.
This commit drops the ability to use HIGHMEM with extent buffers,
and rips out all of the related code.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
A user reported a deadlock when copying a bunch of files. This is because they
were low on memory and kthreadd got hung up trying to migrate pages for an
allocation when starting the caching kthread. The page was locked by the person
starting the caching kthread. To fix this we just need to use the async thread
stuff so that the threads are already created and we don't have to worry about
deadlocks. Thanks,
Reported-by: Roman Mamedov <rm@romanrm.ru>
Signed-off-by: Josef Bacik <josef@redhat.com>
When allocation fails in btrfs_read_fs_root_no_name, ret is not set
although it is returned, holding a garbage value.
Signed-off-by: David Sterba <dsterba@suse.cz>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Removes code no longer used. The sysfs file itself is kept, because the
btrfs developers expressed interest in putting new entries to sysfs.
Signed-off-by: Maarten Lankhorst <m.b.lankhorst@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The recent commit to get rid of our trans_mutex introduced
some races with block group relocation. The problem is that relocation
needs to do some record keeping about each root, and it was relying
on the transaction mutex to coordinate things in subtle ways.
This fix adds a mutex just for the relocation code and makes sure
it doesn't have a big impact on normal operations. The race is
really fixed in btrfs_record_root_in_trans, which is where we
step back and wait for the relocation code to finish accounting
setup.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
list_splice_init will make delalloc_inodes empty, but without a spinlock
around, this may produce corrupted list head, accessed in many placess,
The race window is very tight and nobody seems to have hit it so far.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Scrub starts the workers each time a scrub starts and stops them after it
finished. This patch adds an initialization for the workers before each
start, otherwise the workers behave strangely.
Signed-off-by: Arne Jansen <sensille@gmx.net>
write_dev_supers was changed to use RCU to protect the list of
devices, but it was then sleeping while it actually wrote the supers.
This fixes it to just use the mutex, since we really don't any
concurrency in write_dev_supers anyway.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This will detect small random writes into files and
queue the up for an auto defrag process. It isn't well suited to
database workloads yet, but works for smaller files such as rpm, sqlite
or bdb databases.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
fs_devices->devices is only updated on remove and add device paths, so we can
use rcu to protect it in the reader side
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
On btrfs_congested_fn and __unplug_io_fn paths, we should hold
device_list_mutex to avoid remove/add device path to
update fs_devices->devices
On __btrfs_close_devices and btrfs_prepare_sprout paths, the devices in
fs_devices->devices or fs_devices->devices is updated, so we should hold
the mutex to avoid the reader side to reach them
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
240f62c875 replaced the node_lock with rcu_read_lock, but forgot
to remove the actual lock in the data structure. Remove it here.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We use trans_mutex for lots of things, here's a basic list
1) To serialize trans_handles joining the currently running transaction
2) To make sure that no new trans handles are started while we are committing
3) To protect the dead_roots list and the transaction lists
Really the serializing trans_handles joining is not too hard, and can really get
bogged down in acquiring a reference to the transaction. So replace the
trans_mutex with a trans_lock spinlock and use it to do the following
1) Protect fs_info->running_transaction. All trans handles have to do is check
this, and then take a reference of the transaction and keep on going.
2) Protect the fs_info->trans_list. This doesn't get used too much, basically
it just holds the current transactions, which will usually just be the currently
committing transaction and the currently running transaction at most.
3) Protect the dead roots list. This is only ever processed by splicing the
list so this is relatively simple.
4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using
the trans_mutex before, so this is a pretty straightforward change.
5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over
the entirety of the commit we need to have a way to block new people from
creating a new transaction while we're doing our work. So we set no_trans_join
and in join_transaction we test to see if that is set, and if it is we do a
wait_on_commit.
6) Make the transaction use count atomic so we don't need to take locks to
modify it when we're dropping references.
7) Add a commit_lock to the transaction to make sure multiple people trying to
commit the same transaction don't race and commit at the same time.
8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl
trans.
I have tested this with xfstests, but obviously it is a pretty hairy change so
lots of testing is greatly appreciated. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
I keep forgetting that btrfs_join_transaction() just ignores the num_items
argument, which leads me to sending pointless patches and looking stupid :). So
just kill the num_items argument from btrfs_join_transaction and
btrfs_start_ioctl_transaction, since neither of them use it. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Changelog V5 -> V6:
- Fix oom when the memory load is high, by storing the delayed nodes into the
root's radix tree, and letting btrfs inodes go.
Changelog V4 -> V5:
- Fix the race on adding the delayed node to the inode, which is spotted by
Chris Mason.
- Merge Chris Mason's incremental patch into this patch.
- Fix deadlock between readdir() and memory fault, which is reported by
Itaru Kitayama.
Changelog V3 -> V4:
- Fix nested lock, which is reported by Itaru Kitayama, by updating space cache
inode in time.
Changelog V2 -> V3:
- Fix the race between the delayed worker and the task which does delayed items
balance, which is reported by Tsutomu Itoh.
- Modify the patch address David Sterba's comment.
- Fix the bug of the cpu recursion spinlock, reported by Chris Mason
Changelog V1 -> V2:
- break up the global rb-tree, use a list to manage the delayed nodes,
which is created for every directory and file, and used to manage the
delayed directory name index items and the delayed inode item.
- introduce a worker to deal with the delayed nodes.
Compare with Ext3/4, the performance of file creation and deletion on btrfs
is very poor. the reason is that btrfs must do a lot of b+ tree insertions,
such as inode item, directory name item, directory name index and so on.
If we can do some delayed b+ tree insertion or deletion, we can improve the
performance, so we made this patch which implemented delayed directory name
index insertion/deletion and delayed inode update.
Implementation:
- introduce a delayed root object into the filesystem, that use two lists to
manage the delayed nodes which are created for every file/directory.
One is used to manage all the delayed nodes that have delayed items. And the
other is used to manage the delayed nodes which is waiting to be dealt with
by the work thread.
- Every delayed node has two rb-tree, one is used to manage the directory name
index which is going to be inserted into b+ tree, and the other is used to
manage the directory name index which is going to be deleted from b+ tree.
- introduce a worker to deal with the delayed operation. This worker is used
to deal with the works of the delayed directory name index items insertion
and deletion and the delayed inode update.
When the delayed items is beyond the lower limit, we create works for some
delayed nodes and insert them into the work queue of the worker, and then
go back.
When the delayed items is beyond the upper bound, we create works for all
the delayed nodes that haven't been dealt with, and insert them into the work
queue of the worker, and then wait for that the untreated items is below some
threshold value.
- When we want to insert a directory name index into b+ tree, we just add the
information into the delayed inserting rb-tree.
And then we check the number of the delayed items and do delayed items
balance. (The balance policy is above.)
- When we want to delete a directory name index from the b+ tree, we search it
in the inserting rb-tree at first. If we look it up, just drop it. If not,
add the key of it into the delayed deleting rb-tree.
Similar to the delayed inserting rb-tree, we also check the number of the
delayed items and do delayed items balance.
(The same to inserting manipulation)
- When we want to update the metadata of some inode, we cached the data of the
inode into the delayed node. the worker will flush it into the b+ tree after
dealing with the delayed insertion and deletion.
- We will move the delayed node to the tail of the list after we access the
delayed node, By this way, we can cache more delayed items and merge more
inode updates.
- If we want to commit transaction, we will deal with all the delayed node.
- the delayed node will be freed when we free the btrfs inode.
- Before we log the inode items, we commit all the directory name index items
and the delayed inode update.
I did a quick test by the benchmark tool[1] and found we can improve the
performance of file creation by ~15%, and file deletion by ~20%.
Before applying this patch:
Create files:
Total files: 50000
Total time: 1.096108
Average time: 0.000022
Delete files:
Total files: 50000
Total time: 1.510403
Average time: 0.000030
After applying this patch:
Create files:
Total files: 50000
Total time: 0.932899
Average time: 0.000019
Delete files:
Total files: 50000
Total time: 1.215732
Average time: 0.000024
[1] http://marc.info/?l=linux-btrfs&m=128212635122920&q=p3
Many thanks for Kitayama-san's help!
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: David Sterba <dave@jikos.cz>
Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Tested-by: Itaru Kitayama <kitayama@cl.bb4u.ne.jp>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This adds an initial implementation for scrub. It works quite
straightforward. The usermode issues an ioctl for each device in the
fs. For each device, it enumerates the allocated device chunks. For
each chunk, the contained extents are enumerated and the data checksums
fetched. The extents are read sequentially and the checksums verified.
If an error occurs (checksum or EIO), a good copy is searched for. If
one is found, the bad copy will be rewritten.
All enumerations happen from the commit roots. During a transaction
commit, the scrubs get paused and afterwards continue from the new
roots.
This commit is based on the series originally posted to linux-btrfs
with some improvements that resulted from comments from David Sterba,
Ilya Dryomov and Jan Schmidt.
Signed-off-by: Arne Jansen <sensille@gmx.net>
Remove code which has been #if0-ed out for a very long time and does not
seem to be related to current codebase anymore.
Signed-off-by: David Sterba <dsterba@suse.cz>
Remove static and global declarations and/or definitions. Reduces size
of btrfs.ko by ~3.4kB.
text data bss dec hex filename
402081 7464 200 409745 64091 btrfs.ko.base
398620 7144 200 405964 631cc btrfs.ko.remove-all
Signed-off-by: David Sterba <dsterba@suse.cz>
all callers pass GFP_NOFS, but the GFP mask argument is not used in the
function; GFP_ATOMIC is passed to radix tree initialization and it's the
only correct one, since we're using the preload/insert mechanism of
radix tree.
Let's drop the gfp mask from btrfs function, this will not change
behaviour.
Signed-off-by: David Sterba <dsterba@suse.cz>
The superblock's ->s_fs_info is properly set in btrfs_fill_super, after
a call to open_ctree, which derefereces it before check. Although
tree_root is set via btrfs_set_super, let's be defensive and leave the
check in place.
Signed-off-by: David Sterba <dsterba@suse.cz>
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: cleanup error handling in inode.c
Btrfs: put the right bio if we have an error
Btrfs: free bitmaps properly when evicting the cache
Btrfs: Free free_space item properly in btrfs_trim_block_group()
btrfs: add missing spin_unlock to a rare exit path
Btrfs: check return value of kmalloc()
btrfs: fix wrong allocating flag when reading page
Btrfs: fix missing mutex_unlock in btrfs_del_dir_entries_in_log()
This is similar to block group caching.
We dedicate a special inode in fs tree to save free ino cache.
At the very first time we create/delete a file after mount, the free ino
cache will be loaded from disk into memory. When the fs tree is commited,
the cache will be written back to disk.
To keep compatibility, we check the root generation against the generation
of the special inode when loading the cache, so the loading will fail
if the btrfs filesystem was mounted in an older kernel before.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Currently btrfs stores the highest objectid of the fs tree, and it always
returns (highest+1) inode number when we create a file, so inode numbers
won't be reclaimed when we delete files, so we'll run out of inode numbers
as we keep create/delete files in 32bits machines.
This fixes it, and it works similarly to how we cache free space in block
cgroups.
We start a kernel thread to read the file tree. By scanning inode items,
we know which chunks of inode numbers are free, and we cache them in
an rb-tree.
Because we are searching the commit root, we have to carefully handle the
cross-transaction case.
The rb-tree is a hybrid extent+bitmap tree, so if we have too many small
chunks of inode numbers, we'll use bitmaps. Initially we allow 16K ram
of extents, and a bitmap will be used if we exceed this threshold. The
extents threshold is adjusted in runtime.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (24 commits)
Btrfs: fix free space cache leak
Btrfs: avoid taking the chunk_mutex in do_chunk_alloc
Btrfs end_bio_extent_readpage should look for locked bits
Btrfs: don't force chunk allocation in find_free_extent
Btrfs: Check validity before setting an acl
Btrfs: Fix incorrect inode nlink in btrfs_link()
Btrfs: Check if btrfs_next_leaf() returns error in btrfs_real_readdir()
Btrfs: Check if btrfs_next_leaf() returns error in btrfs_listxattr()
Btrfs: make uncache_state unconditional
btrfs: using cached extent_state in set/unlock combinations
Btrfs: avoid taking the trans_mutex in btrfs_end_transaction
Btrfs: fix subvolume mount by name problem when default mount subvolume is set
fix user annotation in ioctl.c
Btrfs: check for duplicate iov_base's when doing dio reads
btrfs: properly handle overlapping areas in memmove_extent_buffer
Btrfs: fix memory leaks in btrfs_new_inode()
Btrfs: check for duplicate iov_base's when doing dio reads
Btrfs: reuse the extent_map we found when calling btrfs_get_extent
Btrfs: do not use async submit for small DIO io's
Btrfs: don't split dio bios if we don't have to
...
I've been working on making our O_DIRECT latency not suck and I noticed we were
taking the trans_mutex in btrfs_end_transaction. So to do this we convert
num_writers and use_count to atomic_t's and just decrement them in
btrfs_end_transaction. Instead of deleting the transaction from the trans list
in put_transaction we do that in btrfs_commit_transaction() since that's the
only time it actually needs to be removed from the list. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: don't warn in btrfs_add_orphan
Btrfs: fix free space cache when there are pinned extents and clusters V2
Btrfs: Fix uninitialized root flags for subvolumes
btrfs: clear __GFP_FS flag in the space cache inode
Btrfs: fix memory leak in start_transaction()
Btrfs: fix memory leak in btrfs_ioctl_start_sync()
Btrfs: fix subvol_sem leak in btrfs_rename()
Btrfs: Fix oops for defrag with compression turned on
Btrfs: fix /proc/mounts info.
Btrfs: fix compiler warning in file.c
root_item->flags and root_item->byte_limit are not initialized when
a subvolume is created. This bug is not revealed until we added
readonly snapshot support - now you mount a btrfs filesystem and you
may find the subvolumes in it are readonly.
To work around this problem, we steal a bit from root_item->inode_item->flags,
and use it to indicate if those fields have been properly initialized.
When we read a tree root from disk, we check if the bit is set, and if
not we'll set the flag and initialize the two fields of the root item.
Reported-by: Andreas Philipp <philipp.andreas@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Tested-by: Andreas Philipp <philipp.andreas@gmail.com>
cc: stable@kernel.org
Signed-off-by: Chris Mason <chris.mason@oracle.com>
* 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (45 commits)
Btrfs: fix __btrfs_map_block on 32 bit machines
btrfs: fix possible deadlock by clearing __GFP_FS flag
btrfs: check link counter overflow in link(2)
btrfs: don't mess with i_nlink of unlocked inode in rename()
Btrfs: check return value of btrfs_alloc_path()
Btrfs: fix OOPS of empty filesystem after balance
Btrfs: fix memory leak of empty filesystem after balance
Btrfs: fix return value of setflags ioctl
Btrfs: fix uncheck memory allocations
btrfs: make inode ref log recovery faster
Btrfs: add btrfs_trim_fs() to handle FITRIM
Btrfs: adjust btrfs_discard_extent() return errors and trimmed bytes
Btrfs: make btrfs_map_block() return entire free extent for each device of RAID0/1/10/DUP
Btrfs: make update_reserved_bytes() public
btrfs: return EXDEV when linking from different subvolumes
Btrfs: Per file/directory controls for COW and compression
Btrfs: add datacow flag in inode flag
btrfs: use GFP_NOFS instead of GFP_KERNEL
Btrfs: check return value of read_tree_block()
btrfs: properly access unaligned checksum buffer
...
Fix up trivial conflicts in fs/btrfs/volumes.c due to plug removal in
the block layer.
Using the GFP_HIGHUSER_MOVABLE flag to allocate the metadata's page may cause
deadlock.
Task1
open()
...
btrfs_search_slot()
...
btrfs_cow_block()
...
alloc_page()
wait for reclaiming
shrink_slab()
...
shrink_icache_memory()
...
btrfs_evict_inode()
...
btrfs_search_slot()
If the path is locked by task1, the deadlock happens.
So the btree's page cache is different with the file's page cache, it can not
allocate pages by GFP_HIGHUSER_MOVABLE flag, we must clear __GFP_FS flag in
GFP_HIGHUSER_MOVABLE flag.
Reported-by: Itaru Kitayama <kitayama@cl.bb4u.ne.jp>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs will remove unused block groups after balance.
When a empty filesystem is balanced, the block group with tag "DATA" may be
dropped, and after umount and mount again, it will not find "DATA" space_info
and lead to OOPS.
So we initial the necessary space_infos(DATA, SYSTEM, METADATA) to avoid OOPS.
Reported-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Callers of btrfs_discard_extent() should check if we are mounted with -o discard,
as we want to make fitrim to work even the fs is not mounted with -o discard.
Also we should use REQ_DISCARD to map the free extent to get a full mapping,
last we only return errors if
1. the error is not a EOPNOTSUPP
2. no device supports discard
Signed-off-by: Li Dongyang <lidongyang@novell.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Data compression and data cow are controlled across the entire FS by mount
options right now. ioctls are needed to set this on a per file or per
directory basis. This has been proposed previously, but VFS developers
wanted us to use generic ioctls rather than btrfs-specific ones.
According to Chris's comment, there should be just one true compression
method(probably LZO) stored in the super. However, before this, we would
wait for that one method is stable enough to be adopted into the super.
So I list it as a long term goal, and just store it in ram today.
After applying this patch, we can use the generic "FS_IOC_SETFLAGS" ioctl to
control file and directory's datacow and compression attribute.
NOTE:
- The compression type is selected by such rules:
If we mount btrfs with compress options, ie, zlib/lzo, the type is it.
Otherwise, we'll use the default compress type (zlib today).
v1->v2:
- rebase to the latest btrfs.
v2->v3:
- fix a problem, i.e. when a file is set NOCOW via mount option, then this NOCOW
will be screwed by inheritance from parent directory.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
On Fri, Mar 18, 2011 at 11:56:53AM -0400, Chris Mason wrote:
> Thanks for fielding this one. Does put_unaligned_le32 optimize away on
> platforms with efficient access? It would be great if we didn't need
> the #ifdef.
(quicktest: assembly output is same for put_unaligned_le32 and direct
assignment on my x86_64)
I was originally following examples in
Documentation/unaligned-memory-access.txt. From other code it seems to me that
the define CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is intended for larger
portions of code. Macros/wrappers for {put,get}_unaligned* are chosen via
arch/<arch>/include/asm/unaligned.h accordingly, therefore it's safe to use
put_unaligned_le32 without the ifdef.
dave
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This patch changes some BUG_ON() to the error return.
(but, most callers still use BUG_ON())
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits)
Documentation/iostats.txt: bit-size reference etc.
cfq-iosched: removing unnecessary think time checking
cfq-iosched: Don't clear queue stats when preempt.
blk-throttle: Reset group slice when limits are changed
blk-cgroup: Only give unaccounted_time under debug
cfq-iosched: Don't set active queue in preempt
block: fix non-atomic access to genhd inflight structures
block: attempt to merge with existing requests on plug flush
block: NULL dereference on error path in __blkdev_get()
cfq-iosched: Don't update group weights when on service tree
fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away
block: Require subsystems to explicitly allocate bio_set integrity mempool
jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
fs: make fsync_buffers_list() plug
mm: make generic_writepages() use plugging
blk-cgroup: Add unaccounted time to timeslice_used.
block: fixup plugging stubs for !CONFIG_BLOCK
block: remove obsolete comments for blkdev_issue_zeroout.
blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.
...
Fix up conflicts in fs/{aio.c,super.c}
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (47 commits)
doc: CONFIG_UNEVICTABLE_LRU doesn't exist anymore
Update cpuset info & webiste for cgroups
dcdbas: force SMI to happen when expected
arch/arm/Kconfig: remove one to many l's in the word.
asm-generic/user.h: Fix spelling in comment
drm: fix printk typo 'sracth'
Remove one to many n's in a word
Documentation/filesystems/romfs.txt: fixing link to genromfs
drivers:scsi Change printk typo initate -> initiate
serial, pch uart: Remove duplicate inclusion of linux/pci.h header
fs/eventpoll.c: fix spelling
mm: Fix out-of-date comments which refers non-existent functions
drm: Fix printk typo 'failled'
coh901318.c: Change initate to initiate.
mbox-db5500.c Change initate to initiate.
edac: correct i82975x error-info reported
edac: correct i82975x mci initialisation
edac: correct commented info
fs: update comments to point correct document
target: remove duplicate include of target/target_core_device.h from drivers/target/target_core_hba.c
...
Trivial conflict in fs/eventpoll.c (spelling vs addition)
Currently if we have corrupted items things will blow up in spectacular ways.
So as we read in blocks and they are leaves, check the entire leaf to make sure
all of the items are correct and point to valid parts in the leaf for the item
data the are responsible for. If the item is corrupt we will kick back EIO and
not read any of the copies since they are likely to not be correct either. This
will catch generic corruptions, it will be up to the individual callers of
btrfs_search_slot to make sure their items are right. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
If we cannot truncate an inode for some reason we will never delete the orphan
item associated with that inode, which means that we will loop forever in
btrfs_orphan_cleanup. Instead of doing this just return error so we fail to
mount. It sucks, but hey it's better than hanging. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
There is a race where btrfs_releasepage can drop the
page->private contents just as alloc_extent_buffer is setting
up pages for metadata. Because of how the Btrfs page flags work,
this results in us skipping the crc on the page during IO.
This patch sovles the race by waiting until after the extent buffer
is inserted into the radix tree before it sets page private.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
