Commit graph

17 commits

Author SHA1 Message Date
Steve Wise
1ca19770c5 RDMA/cxgb3: Add set_tcb_rpl_handler
As of commit 6cdbd77e ("cxgb3 - missing CPL hanler and register
setting."), the cxgb3 ethernet NIC driver no longer handles SET_TCB
replies, so we need to do it in the iWARP driver.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Acked-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-12 10:37:11 -07:00
Steve Wise
ed6ee5178e RDMA/cxgb3: Fix resource leak in cxio_hal_init_ctrl_qp()
This was spotted by the Coverity checker (CID 1554).

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-26 15:54:40 -07:00
Steve Wise
d601347188 RDMA/cxgb3: Handle build_phys_page_list() failure in iwch_reregister_phys_mem()
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-22 14:40:16 -07:00
Steve Wise
e64518f373 RDMA/cxgb3: Fix MR permission problems
Fix memory region permission problems:

- remove useless and redundant iwch_mem_perms enum.

- create ib_to_tpt_access_rights() for mapping ib access rights
  to T3 TPT permissions.

- create ib_to_mwbind_access_rights() for mapping ib access rights
  to T3 MWBIND WR permissions.

- fix up the mem reg code to utilize the new functions.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06 12:51:02 -08:00
Steve Wise
1f6a849b7c RDMA/cxgb3: Don't reuse skbs that are non-linear or cloned
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06 12:50:57 -08:00
Steve Wise
8cfccf02bb RDMA/cxgb3: Squelch logging AE errors
Only print one AE error for a given connection in the kernel log.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06 12:50:53 -08:00
Steve Wise
adf376b370 RDMA/cxgb3: Stop EP timer when MPA exchange is aborted by peer
Stop the endpoint timer when the MPA exchange is aborted by the peer.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06 12:50:49 -08:00
Steve Wise
2df50da00e RDMA/cxgb3: Move QP to error on destroy if the state is IDLE
Change iwch_destroy_qp() to always move the QP to ERROR and let
iwch_modify_qp() decide what to do.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06 12:50:45 -08:00
Steve Wise
42e3175354 RDMA/cxgb3: Fixes for "normal close" failures
Fixes for "normal close" failures:

- Start normal close timer when moving to CLOSING state.
- Handle ABORTING state in close_con_rpl().
- Stop timer correctly on abort during a normal close.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06 12:50:37 -08:00
David Miller
c3bb1092c8 RDMA/cxgb3: Fix build on sparc64
cxgb3 uses dma_alloc_coherent() et al. thus needs linux/dma-mapping.h
include in order to build reliably.

Noticed on sparc64.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06 12:45:57 -08:00
Steve Wise
aeb100e246 RDMA/cxgb3: Don't use mm after it's freed in iwch_mmap()
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06 11:48:17 -08:00
Steve Wise
7d526e6b2c RDMA/cxgb3: Start ep timer on a MPA reject
If the consumer rejects the connection we end up under-referencing the
endpoint structure.  The fix is to call iwch_ep_disconnect() instead
of the low level disconnect functions so that the endpoint close timer
is started correctly.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06 11:47:05 -08:00
Steve Wise
2f236735fd RDMA/cxgb3: Stop the EP Timer on BAD CLOSE
Stop the ep timer in ec_status() if the status indicates a
bad close.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-23 13:12:48 -08:00
Adrian Bunk
2b540355cd RDMA/cxgb3: cleanups
- don't mark static functions in C files as inline - gcc should know
  best whether inlining makes sense
- never compile the unused cxio_dbg.c
- make the following needlessly global functions static:
  - cxio_hal.c: cxio_hal_clear_qp_ctx()
  - iwch_provider.c: iwch_get_qp()
- remove the following unused global functions:
  - cxio_hal.c: cxio_allocate_stag()
  - cxio_resource.: cxio_hal_get_rhdl()
  - cxio_resource.: cxio_hal_put_rhdl()

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-23 13:10:43 -08:00
Steve Wise
c52daa2976 RDMA/cxgb3: Remove Open Grid Computing copyrights in iw_cxgb3 driver
Remove the Open Grid Computing copyright.  It shouldn't be there.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 13:57:35 -08:00
Steve Wise
a1a750523b RDMA/cxgb3: Fail posts synchronously when in TERMINATE state
For T3B devices, mark user QP in error once we transition
to TERMINATE.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 13:57:35 -08:00
Steve Wise
b038ced7b3 RDMA/cxgb3: Add driver for Chelsio T3 RNIC
Add an RDMA/iWARP driver for the Chelsio T3 1GbE and 10GbE adapters.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-12 16:16:18 -08:00