unfortunately, nlink_t may be smaller than 32 bits and ->i_nlink
on ocfs2 can grow up to 0xffffffff; storing it in nlink_t variable
will lose upper bits on such architectures. Needs to be made u32,
until we get kernel-side nlink_t uniformly 32bit...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
vfs_create() ignores everything outside of 16bit subset of its
mode argument; switching it to umode_t is obviously equivalent
and it's the only caller of the method
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
vfs_mkdir() gets int, but immediately drops everything that might not
fit into umode_t and that's the only caller of ->mkdir()...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Replace remaining direct i_nlink updates with a new set_nlink()
updater function.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Replace direct i_nlink updates with the respective updater function
(inc_nlink, drop_nlink, clear_nlink, inode_dec_link_count).
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Replace the ->check_acl method with a ->get_acl method that simply reads an
ACL from disk after having a cache miss. This means we can replace the ACL
checking boilerplate code with a single implementation in namei.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
its value depends only on inode and does not change; we might as
well store it in ->i_op->check_acl and be done with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
mlog_exit is used to record the exit status of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.
This patch just try to remove it or change it. So:
1. if all the error paths already use mlog_errno, it is just removed.
Otherwise, it will be replaced by mlog_errno.
2. if it is used to print some return value, it is replaced with
mlog(0,...).
mlog_exit_ptr is changed to mlog(0.
All those mlog(0,...) will be replaced with trace events later.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
ENTRY is used to record the entry of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.
So for mlog_entry_void, we just remove it.
for mlog_entry(...), we replace it with mlog(0,...), and they
will be replace by trace event later.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
SELinux would like to implement a new labeling behavior of newly created
inodes. We currently label new inodes based on the parent and the creating
process. This new behavior would also take into account the name of the
new object when deciding the new label. This is not the (supposed) full path,
just the last component of the path.
This is very useful because creating /etc/shadow is different than creating
/etc/passwd but the kernel hooks are unable to differentiate these
operations. We currently require that userspace realize it is doing some
difficult operation like that and than userspace jumps through SELinux hoops
to get things set up correctly. This patch does not implement new
behavior, that is obviously contained in a seperate SELinux patch, but it
does pass the needed name down to the correct LSM hook. If no such name
exists it is fine to pass NULL.
Signed-off-by: Eric Paris <eparis@redhat.com>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (22 commits)
MAINTAINERS: Update Joel Becker's email address
ocfs2: Remove unused truncate function from alloc.c
ocfs2/cluster: dereferencing before checking in nst_seq_show()
ocfs2: fix build for OCFS2_FS_STATS not enabled
ocfs2/cluster: Show o2net timing statistics
ocfs2/cluster: Track process message timing stats for each socket
ocfs2/cluster: Track send message timing stats for each socket
ocfs2/cluster: Use ktime instead of timeval in struct o2net_sock_container
ocfs2/cluster: Replace timeval with ktime in struct o2net_send_tracking
ocfs2: Add DEBUG_FS dependency
ocfs2/dlm: Hard code the values for enums
ocfs2/dlm: Minor cleanup
ocfs2/dlm: Cleanup dlmdebug.c
ocfs2: Release buffer_head in case of error in ocfs2_double_lock.
ocfs2/cluster: Pin the local node when o2hb thread starts
ocfs2/cluster: Show pin state for each o2hb region
ocfs2/cluster: Pin/unpin o2hb regions
ocfs2/cluster: Remove dropped region from o2hb quorum region bitmap
ocfs2/cluster: Pin the remote node item in configfs
ocfs2/dlm: make existing convertion precedent over new lock
...
Reduce some branches and memory accesses in dcache lookup by adding dentry
flags to indicate common d_ops are set, rather than having to check them.
This saves a pointer memory access (dentry->d_op) in common path lookup
situations, and saves another pointer load and branch in cases where we
have d_op but not the particular operation.
Patched with:
git grep -E '[.>]([[:space:]])*d_op([[:space:]])*=' | xargs sed -e 's/\([^\t ]*\)->d_op = \(.*\);/d_set_d_op(\1, \2);/' -e 's/\([^\t ]*\)\.d_op = \(.*\);/d_set_d_op(\&\1, \2);/' -i
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
In ocfs2_double_lock, when ocfs2_inode_lock for inode1 fails, we
just unlock inode2 and return without releasing buffer we get from
inode_lock(inode2). The good thing is that it is freed by the only
caller ocfs2_rename when it exits.
But I don't think this is a right way for error handling. We should
free the buffer_head we get in ocfs2_double_lock before exit so that
the caller doesn't need to take care of it.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Track negative dentries by recording the generation number of the parent
directory in d_fsdata. The generation number for the parent directory is
recorded in the inode_info, which increments every time the lock on the
directory is dropped.
If the generation number of the parent directory and the negative dentry
matches, there is no need to perform the revalidate, else a revalidate
is forced. This improves performance in situations where nodes look for
the same non-existent file multiple times.
Thanks Mark for explaining the DLM sequence.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
ocfs2_create_inode_in_orphan() is used by reflink to create the newly
reflinked inode simultaneously in the orphan dir. This allows us to easily
handle partially-reflinked files during recovery cleanup.
We have a problem though - the orphan dir stringifies inode # to determine
a unique name under which the orphan entry dirent can be created. Since
ocfs2_create_inode_in_orphan() needs the space allocated in the orphan dir
before it can allocate the inode, we currently call into the orphan code:
/*
* We give the orphan dir the root blkno to fake an orphan name,
* and allocate enough space for our insertion.
*/
status = ocfs2_prepare_orphan_dir(osb, &orphan_dir,
osb->root_blkno,
orphan_name, &orphan_insert);
Using osb->root_blkno might work fine on unindexed directories, but the
orphan dir can have an index. When it has that index, the above code fails
to allocate the proper index entry. Later, when we try to remove the file
from the orphan dir (using the actual inode #), the reflink operation will
fail.
To fix this, I created a function ocfs2_alloc_orphaned_file() which uses the
newly split out orphan and inode alloc code to figure out what the inode
block number will be (once allocated) and then prepare the orphan dir from
that data.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
We do this because ocfs2_create_inode_in_orphan() wants to order locking of
the orphan dir with respect to locking of the inode allocator *before*
making any changes to the directory.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Do this by splitting the bulk of the function away from the inode allocation
code at the very tom of ocfs2_mknod_locked(). Existing callers don't need to
change and won't see any difference. The new function created,
__ocfs2_mknod_locked() will be used shortly.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (47 commits)
ocfs2: Silence a gcc warning.
ocfs2: Don't retry xattr set in case value extension fails.
ocfs2:dlm: avoid dlm->ast_lock lockres->spinlock dependency break
ocfs2: Reset xattr value size after xa_cleanup_value_truncate().
fs/ocfs2/dlm: Use kstrdup
fs/ocfs2/dlm: Drop memory allocation cast
Ocfs2: Optimize punching-hole code.
Ocfs2: Make ocfs2_find_cpos_for_left_leaf() public.
Ocfs2: Fix hole punching to correctly do CoW during cluster zeroing.
Ocfs2: Optimize ocfs2 truncate to use ocfs2_remove_btree_range() instead.
ocfs2: Block signals for mkdir/link/symlink/O_CREAT.
ocfs2: Wrap signal blocking in void functions.
ocfs2/dlm: Increase o2dlm lockres hash size
ocfs2: Make ocfs2_extend_trans() really extend.
ocfs2/trivial: Code cleanup for allocation reservation.
ocfs2: make ocfs2_adjust_resv_from_alloc simple.
ocfs2: Make nointr a default mount option
ocfs2/dlm: Make o2dlm domain join/leave messages KERN_NOTICE
o2net: log socket state changes
ocfs2: print node # when tcp fails
...
Once file or link creation gets going, it can't be interrupted by a
signal. They're not idempotent.
This blocks signals in ocfs2_mknod(), ocfs2_link(), and ocfs2_symlink()
once we start actually changing things. ocfs2_mknod() covers mknod(),
creat(), mkdir(), and open(O_CREAT).
Signed-off-by: Joel Becker <joel.becker@oracle.com>
jbd[2]_journal_dirty_metadata() only returns 0. It's been returning 0
since before the kernel moved to git. There is no point in checking
this error.
ocfs2_journal_dirty() has been faithfully returning the status since the
beginning. All over ocfs2, we have blocks of code checking this can't
fail status. In the past few years, we've tried to avoid adding these
checks, because they are pointless. But anyone who looks at our code
assumes they are needed.
Finally, ocfs2_journal_dirty() is made a void function. All error
checking is removed from other files. We'll BUG_ON() the status of
jbd2_journal_dirty_metadata() just in case they change it someday. They
won't.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
If we get a failure during creation of an inode we'll allow the orphan code
to remove the inode, which is correct. However, we need to ensure that we
don't get any errors after the call to ocfs2_add_entry(), otherwise we could
leave a dangling directory reference. The solution is simple - in both
cases, all I had to do was move ocfs2_dentry_attach_lock() above the
ocfs2_add_entry() call.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Mark the inode with flag OCFS2_INODE_SKIP_ORPHAN_DIR in ocfs2_mknod, so we
can kill the inode in case of error.
[ Fixed up comment style -Mark ]
Signed-off-by: Li Dongyang <lidongyang@novell.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Mark the inode with flag OCFS2_INODE_SKIP_ORPHAN_DIR when we get an error
after allocating one, so that we can kill the inode.
Signed-off-by: Li Dongyang <lidongyang@novell.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Currently in the error path of ocfs2_symlink and ocfs2_mknod, we just call
iput with the inode we failed with, but the inode wipe code will complain
because we don't add the inode to orphan dir. One solution would be to lock
the orphan dir during the entire transaction, but that's too heavy for a
rare error path. Instead, we add a flag, OCFS2_INODE_SKIP_ORPHAN_DIR which
tells the inode wipe code that it won't find this inode in the orphan dir.
[ Merge fixes and comment style cleanups -Mark ]
Signed-off-by: Li Dongyang <lidongyang@novell.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Currently, some callers were missing to journal the dirty inode after
adding it to orphan dir.
Now we're going to journal such modifications within the ocfs2_orphan_add()
itself, It's safe to do so, though some existing caller may duplicate this,
and it makes the logic look more straightforward anyway.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Get the suballoc_loc from ocfs2_claim_new_inode() or
ocfs2_claim_metadata(). Store it on the appropriate field of the block
we just allocated.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
They all take an ocfs2_alloc_context, which has the allocation inode.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Get rid of the initialize dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.
Rename the now static low-level dquot_initialize helper to __dquot_initialize
and vfs_dq_init to dquot_initialize to have a consistent namespace.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently various places in the VFS call vfs_dq_init directly. This means
we tie the quota code into the VFS. Get rid of that and make the
filesystem responsible for the initialization. For most metadata operations
this is a straight forward move into the methods, but for truncate and
open it's a bit more complicated.
For truncate we currently only call vfs_dq_init for the sys_truncate case
because open already takes care of it for ftruncate and open(O_TRUNC) - the
new code causes an additional vfs_dq_init for those which is harmless.
For open the initialization is moved from do_filp_open into the open method,
which means it happens slightly earlier now, and only for regular files.
The latter is fine because we don't need to initialize it for operations
on special files, and we already do it as part of the namespace operations
for directories.
Add a dquot_file_open helper that filesystems that support generic quotas
can use to fill in ->open.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Get rid of the alloc_inode and free_inode dquot operations - they are
always called from the filesystem and if a filesystem really needs
their own (which none currently does) it can just call into it's
own routine directly.
Also get rid of the vfs_dq_alloc/vfs_dq_free wrappers and always
call the lowlevel dquot_alloc_inode / dqout_free_inode routines
directly, which now lose the number argument which is always 1.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Get rid of the alloc_space, free_space, reserve_space, claim_space and
release_rsv dquot operations - they are always called from the filesystem
and if a filesystem really needs their own (which none currently does)
it can just call into it's own routine directly.
Move shared logic into the common __dquot_alloc_space,
dquot_claim_space_nodirty and __dquot_free_space low-level methods,
and rationalize the wrappers around it to move as much as possible
code into the common block for CONFIG_QUOTA vs not. Also rename
all these helpers to be named dquot_* instead of vfs_dq_*.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2/trivial: Use le16_to_cpu for a disk value in xattr.c
ocfs2/trivial: Use proper mask for 2 places in hearbeat.c
Ocfs2: Let ocfs2 support fiemap for symlink and fast symlink.
Ocfs2: Should ocfs2 support fiemap for S_IFDIR inode?
ocfs2: Use FIEMAP_EXTENT_SHARED
fiemap: Add new extent flag FIEMAP_EXTENT_SHARED
ocfs2: replace u8 by __u8 in ocfs2_fs.h
ocfs2: explicit declare uninitialized var in user_cluster_connect()
ocfs2-devel: remove redundant OCFS2_MOUNT_POSIX_ACL check in ocfs2_get_acl_nolock()
ocfs2: return -EAGAIN instead of EAGAIN in dlm
ocfs2/cluster: Make fence method configurable - v2
ocfs2: Set MS_POSIXACL on remount
ocfs2: Make acl use the default
ocfs2: Always include ACL support
We create a file in orphan dir for reflink so that if there
is any error, we don't create any wrong dentry in the dir.
But actually the file in orphan dir should be i_nlink = 0
so that it can be replayed and freed successfully.
This patch first set i_nlink to 0 when creating the file in
orphan dir and then set it to 1(reflink now only works for
regular file) when we move it to the dest dir.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We used to add reflinked file's inode to inode hash when
we add it to the dest dir. But actually there is a race.
Consider the following sequence.
1. reflink happens and create the inode in orphan dir.
2. reflink thread is scheduled out because of some io.
3. recovery begins to work and calls ocfs2_recover_orphans.
It calls ocfs2_iget and get a new inode and i_count = 1.
It calls iput then and delete inode. the buffer's
uptodate state is cleared.
This patch move insert_inode_hash to the create function so
that it can be found by step 3 and prevented from deleting
because i_count > 1.
This resolves the bug
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1183.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Let userspace have a chance to get the extent info of a
directory just like extN did.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
reflink is a very complicated process, so it can't be integrated
into one transaction. So if the system panic in the operation, we
may leave a unfinished inode in the destication directory.
So we will try to create an inode in orphan_dir first, reflink it
to the src file and then move it to the destication file in the end.
In that way we won't be afraid of any corruption during the reflink.
This patch adds 2 functions for orphan_dir operation:
1. Create a new inode in orphand dir.
2. Move an inode to a target dir.
Note:
fsck.ocfs2 should work for us to remove the unfinished file in the
orphan_dir.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
In order to make the original function more suitable for reflink,
we modify the following inode operations. Both are tiny.
1. ocfs2_mknod_locked only use dentry for mlog, so move it to
the caller so that reflink can use it without dentry.
2. ocfs2_prepare_orphan_dir only want inode to get its ip_blkno.
So use ip_blkno instead.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
The next step in divorcing metadata I/O management from struct inode is
to pass struct ocfs2_caching_info to the journal functions. Thus the
journal locks a metadata cache with the cache io_lock function. It also
can compare ci_last_trans and ci_created_trans directly.
This is a large patch because of all the places we change
ocfs2_journal_access..(handle, inode, ...) to
ocfs2_journal_access..(handle, INODE_CACHE(inode), ...).
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We are really passing the inode into the ocfs2_read/write_blocks()
functions to get at the metadata cache. This commit passes the cache
directly into the metadata block functions, divorcing them from the
inode.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
