Currently when two or more buffers are queued by the camera driver
and so the double buffering is enabled in the idmac, we lose one
frame comming from CSI since the reporting of arrival of the first
frame is deferred by the DMAIC_7_EOF interrupt handler and reporting
of the arrival of the last frame is not done at all. So when requesting
N frames from the image sensor we actually receive N - 1 frames in
user space.
The reason for this behaviour is that the DMAIC_7_EOF interrupt
handler misleadingly assumes that the CUR_BUF flag is pointing to the
buffer used by the IDMAC. Actually it is not the case since the
CUR_BUF flag will be flipped by the FSU when the FSU is sending the
<TASK>_NEW_FRM_RDY signal when new frame data is delivered by the CSI.
When sending this singal, FSU updates the DMA_CUR_BUF and the
DMA_BUFx_RDY flags: the DMA_CUR_BUF is flipped, the DMA_BUFx_RDY
is cleared, indicating that the frame data is beeing written by
the IDMAC to the pointed buffer. DMA_BUFx_RDY is supposed to be
set to the ready state again by the MCU, when it has handled the
received data. DMAIC_7_CUR_BUF flag won't be flipped here by the
IPU, so waiting for this event in the EOF interrupt handler is wrong.
Actually there is no spurious interrupt as described in the comments,
this is the valid DMAIC_7_EOF interrupt indicating reception of the
frame from CSI.
The patch removes code that waits for flipping of the DMAIC_7_CUR_BUF
flag in the DMAIC_7_EOF interrupt handler. As the comment in the
current code denotes, this waiting doesn't help anyway. As a result
of this removal the reporting of the first arrived frame is not
deferred to the time of arrival of the next frame and the drivers
software flag 'ichan->active_buffer' is in sync with DMAIC_7_CUR_BUF
flag, so the reception of all requested frames works.
This has been verified on the hardware which is triggering the
image sensor by the programmable state machine, allowing to
obtain exact number of frames. On this hardware we do not tolerate
losing frames.
This patch also removes resetting the DMA_BUFx_RDY flags of
all channels in ipu_disable_channel() since transfers on other
DMA channels might be triggered by other running tasks and the
buffers should always be ready for data sending or reception.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Commit c0e69a5bbc ("klist.c: bit 0 in pointer can't be used as flag")
intended to make sure that all klist objects were at least pointer size
aligned, but used the constant "4" which only works on 32-bit.
Use "sizeof(void *)" which is correct in all cases.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: stable <stable@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'intel/drm-intel-fixes' of /ssd/git/drm-next:
drm/i915: Fix resume regression from 5d1d0cc
drm/i915/tv: Use polling rather than interrupt-based hotplug
drm/i915: Trigger modesetting if force-audio changes
drm/i915/sdvo: If we have an EDID confirm it matches the mode of the connection
drm/i915: Disable RC6 on Ironlake
drm/i915/lvds: Restore dithering on native modes for gen2/3
drm/i915: Invalidate TLB caches on SNB BLT/BSD rings
Makes debugging CS rejections much easier.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is an important security fix because we allowed arbitrary values
to be passed to AARESOLVE_OFFSET. This also puts the right buffer address
in the register.
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Not only is linear aligned supposedly more performant,
linear general is only supported by the CB in single
slice mode. The texture hardware doesn't support
linear general, but I think the hw automatically
upgrades it to linear aligned.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Not only is linear aligned supposedly more performant,
linear general is only supported by the CB in single
slice mode. The texture hardware doesn't support
linear general, but I think the hw automatically
upgrades it to linear aligned.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
My evergreen has been in a remote PC for week and reset has never once
saved me from certain doom, I finally relocated to the box with a
serial cable and noticed an oops when the GPU resets, and the TTM
delayed delete thread tries to remove something from the GTT.
This stops the delayed delete thread from executing across the GPU
reset handler, and woot I can GPU reset now.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Based on 6xx/7xx endian fixes from Cédric Cano.
v2: fix typo in shader
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
agd5f: minor cleanups
Signed-off-by: Cédric Cano <ccano@interfaceconcept.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
agd5f: minor cleanups
Signed-off-by: Cédric Cano <ccano@interfaceconcept.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The colorbuffer, zbuffer, and texture states are checked only once when
they get changed. This improves performance in the apps which emit
lots of draw packets and few state changes.
This drops performance in glxgears by a 1% or so, but glxgears is not
a benchmark we care about.
The time spent in the kernel when running Torcs dropped from 33% to 23%
and the frame rate is higher, which is a good thing.
r600 might need something like this as well.
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In the continuing effort to avoid kernel addresses leaking to unprivileged
users, this patch switches to %pK for /proc/dri/*/vma.
Signed-off-by: Kees Cook <kees.cook@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
PPC Mac cards do not provide connector tables in
their vbios. Their connector/encoder configurations
must be hardcoded in the driver.
verified by nyef on #radeon
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
drivers/gpu/drm/radeon/mkregtable.c:parser_auth() almost always remembers
to fclose(file) before returning, but it misses two spots.
This is not really important since the process will exit shortly after and
thus close the file for us, but being explicit prevents static analysis
tools from complaining about leaked memory and missing fclose() calls and
it also seems to be the prefered style of the existing code to explicitly
close the file.
So, here's a patch to add the two missing fclose() calls.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
- set scaler table clears the interleave bit, need to
reset it in encoder quirks, this was already done for
pre-dce4.
- remove the interleave settings from set_base() functions
this is now handled in the encoder quirks functions, and
isn't technically part of the display base setup.
- rename evergreen_do_set_base() to dce4_do_set_base() since
it's used on both evergreen and NI asics.
Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=28182
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
The old code dereferenced a value, the new code just needs to pass
the ptr.
fixes an oops looking at files in debugfs.
cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6:
devicetree-discuss is moderated for non-subscribers
MAINTAINERS: Add entry for GPIO subsystem
dt: add documentation of ARM dt boot interface
dt: Remove obsolete description of powerpc boot interface
dt: Move device tree documentation out of powerpc directory
spi/spi_sh_msiof: fix wrong address calculation, which leads to an Oops
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: hda - add quirk for Ordissimo EVE using a realtek ALC662
ALSA: hrtimer: remove superfluous tasklet invocation
ALSA: hrtimer: handle delayed timer interrupts
ALSA: HDA: Add subwoofer quirk for Acer Aspire 8942G
ALSA: hda - Don't handle empty patch files
ALSA: hda - Fix missing CA initialization for HDMI/DP
ALSA: usbaudio - Enable the E-MU 0204 USB
ALSA: hda - switch lfe with side in mixer for 4930g
ASoC: Improve WM8994 digital power sequencing
ASoC: Create an AIF1ADCDAT signal widget to match AIF2
asoc: davinci: da830/omap-l137: correct cpu_dai_name
ASoC: fill in snd_soc_pcm_runtime.card before calling snd_soc_dai_link.init()
This reverts commit 47970b1b2a.
It turns out it breaks several distributions. Looks like the stricter
selinux checks fail due to selinux policies not being set to allow the
access - breaking X, but also lspci.
So while the change was clearly the RightThing(tm) to do in theory, in
practice we have backwards compatibility issues making it not work.
Reported-by: Dave Young <hidave.darkstar@gmail.com>
Acked-by: David Airlie <airlied@linux.ie>
Acked-by: Alex Riesen <raa.lkml@gmail.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
jbd2: call __jbd2_log_start_commit with j_state_lock write locked
ext4: serialize unaligned asynchronous DIO
ext4: make grpinfo slab cache names static
ext4: Fix data corruption with multi-block writepages support
ext4: fix up ext4 error handling
ext4: unregister features interface on module unload
ext4: fix panic on module unload when stopping lazyinit thread
On an SMP ARM system running ext4, I've received a report that the
first J_ASSERT in jbd2_journal_commit_transaction has been triggering:
J_ASSERT(journal->j_running_transaction != NULL);
While investigating possible causes for this problem, I noticed that
__jbd2_log_start_commit() is getting called with j_state_lock only
read-locked, in spite of the fact that it's possible for it might
j_commit_request. Fix this by grabbing the necessary information so
we can test to see if we need to start a new transaction before
dropping the read lock, and then calling jbd2_log_start_commit() which
will grab the write lock.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4 has a data corruption case when doing non-block-aligned
asynchronous direct IO into a sparse file, as demonstrated
by xfstest 240.
The root cause is that while ext4 preallocates space in the
hole, mappings of that space still look "new" and
dio_zero_block() will zero out the unwritten portions. When
more than one AIO thread is going, they both find this "new"
block and race to zero out their portion; this is uncoordinated
and causes data corruption.
Dave Chinner fixed this for xfs by simply serializing all
unaligned asynchronous direct IO. I've done the same here.
The difference is that we only wait on conversions, not all IO.
This is a very big hammer, and I'm not very pleased with
stuffing this into ext4_file_write(). But since ext4 is
DIO_LOCKING, we need to serialize it at this high level.
I tried to move this into ext4_ext_direct_IO, but by then
we have the i_mutex already, and we will wait on the
work queue to do conversions - which must also take the
i_mutex. So that won't work.
This was originally exposed by qemu-kvm installing to
a raw disk image with a normal sector-63 alignment. I've
tested a backport of this patch with qemu, and it does
avoid the corruption. It is also quite a lot slower
(14 min for package installs, vs. 8 min for well-aligned)
but I'll take slow correctness over fast corruption any day.
Mingming suggested that we can track outstanding
conversions, and wait on those so that non-sparse
files won't be affected, and I've implemented that here;
unaligned AIO to nonsparse files won't take a perf hit.
[tytso@mit.edu: Keep the mutex as a hashed array instead
of bloating the ext4 inode]
[tytso@mit.edu: Fix up namespace issues so that global
variables are protected with an "ext4_" prefix.]
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In 2.6.37 I was running into oopses with repeated module
loads & unloads. I tracked this down to:
fb1813f4 ext4: use dedicated slab caches for group_info structures
(this was in addition to the features advert unload problem)
The kstrdup & subsequent kfree of the cache name was causing
a double free. In slub, at least, if I read it right it allocates
& frees the name itself, slab seems to do something different...
so in slub I think we were leaking -our- cachep->name, and double
freeing the one allocated by slub.
After getting lost in slab/slub/slob a bit, I just looked at other
sized-caches that get allocated. jbd2, biovec, sgpool all do it
more or less the way jbd2 does. Below patch follows the jbd2
method of dynamically allocating a cache at mount time from
a list of static names.
(This might also possibly fix a race creating the caches with
parallel mounts running).
[Folded in a fix from Dan Carpenter which fixed an off-by-one error in
the original patch]
Cc: stable@kernel.org
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
commit a3c08e5d(x86: Convert irq_chip access to new functions)
accidentally zapped desc = irq_to_desc(irq); in the vector loop.
So we lock some random irq descriptor.
Add it back.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org> # .37
This patch reverts one hunk of 677bd810ee
"ACPI video: remove output switching control", namely the removal of
probing for _DOS/_DOD when searching for video devices.
This is needed on some Fujitsu Laptops (at least S7110, P8010) for the
ACPI backlight interface to work, as an these machines, neither ROM nor
posting methods are available, and after removal of output switching,
none of the caps triggers, which prevents the backlight search from
being entered.
Tested on a Fujitsu Lifebook S7110 and Fujitsu Lifebook P8010.
This probably fixes https://bugzilla.kernel.org/show_bug.cgi?id=27312
for the people who have no entry in /sys/class/backlight.
This is the complete list of public (starting with "_") methods implemented
on the S7110, BIOS rev 1.34:
\_SB_.PCI0.GFX0._ADR
\_SB_.PCI0.GFX0._DOS
\_SB_.PCI0.GFX0._DOD
\_SB_.PCI0.GFX0.CRT._ADR
\_SB_.PCI0.GFX0.CRT._DCS
\_SB_.PCI0.GFX0.CRT._DGS
\_SB_.PCI0.GFX0.CRT._DSS
\_SB_.PCI0.GFX0.LCD._ADR
\_SB_.PCI0.GFX0.LCD._BCL
\_SB_.PCI0.GFX0.LCD._BCM
\_SB_.PCI0.GFX0.LCD._BQC
\_SB_.PCI0.GFX0.LCD._DCS
\_SB_.PCI0.GFX0.LCD._DGS
\_SB_.PCI0.GFX0.LCD._DSS
\_SB_.PCI0.GFX0.LCD._PS0
\_SB_.PCI0.GFX0.LCD._PS3
\_SB_.PCI0.GFX0.TV._ADR
\_SB_.PCI0.GFX0.TV._DCS
\_SB_.PCI0.GFX0.TV._DGS
\_SB_.PCI0.GFX0.TV._DSS
\_SB_.PCI0.GFX0.DVI._ADR
\_SB_.PCI0.GFX0.DVI._DCS
\_SB_.PCI0.GFX0.DVI._DGS
\_SB_.PCI0.GFX0.DVI._DSS
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Commit 9630bdd (ACPI: Use GPE reference counting to support shared
GPEs) introduced a suspend regression where boxes resume immediately
after being suspended due to the lid or sleep button wakeup status
not being cleared properly. This happens if the GPEs corresponding
to those devices are not enabled all the time, which apparently is
expected by some BIOSes.
To fix this problem, enable button and lid GPEs unconditionally
during initialization and keep them enabled all the time, regardless
of whether or not the ACPI button driver is used.
References: https://bugzilla.kernel.org/show_bug.cgi?id=27372
Reported-and-tested-by: Ferenc Wágner <wferi@niif.hu>
Cc: stable@kernel.org
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Some ACPI BIOSes define _PRW for the root object which causes
acpi_setup_gpe_for_wake() to crash when trying to dereference the
bogus device_node pointer. Avoid the crash by checking if
wake_device is not the root object before attempting to set up the
"implicit notify" mechanism for it.
The problem was introduced by commit bba63a296f
(ACPICA: Implicit notify support) that added the wake_device argument
to acpi_setup_gpe_for_wake().
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
cifs: don't always drop malformed replies on the floor (try #3)
cifs: clean up checks in cifs_echo_request
[CIFS] Do not send SMBEcho requests on new sockets until SMBNegotiate
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
pci: use security_capable() when checking capablities during config space read
security: add cred argument to security_capable()
tpm_tis: Use timeouts returned from TPM
* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: SAMSUNG: Ensure struct sys_device is declared in plat/pm.h
ARM: S5PV310: Cleanup System MMU
ARM: S5PV310: Add support System MMU on SMDKV310
This code makes two calls to clk_get, then test both return values and
fails if either failed.
The problem is that in the first inner if, where the first call to
clk_get has failed, it don't know if the second call has failed as well.
So it don't know whether clk_get should be called on the result of the
second call. Of course, it would be possible to test that value again.
A simpler solution is just to test the result of calling clk_get
directly after each call.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
position p1,p2;
expression e;
statement S;
@@
e = clk_get@p1(...)
...
if@p2 (IS_ERR(e)) S
@@
expression e;
statement S;
identifier l;
position r.p1, p2 != r.p2;
@@
*e = clk_get@p1(...)
... when != clk_put(e)
*if@p2 (...)
{
... when != clk_put(e)
* return ...;
}// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Amit Kucheria <amit.kucheria@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 3e7d344970 ("mm: vmscan: reclaim order-0 and use compaction
instead of lumpy reclaim") introduced an indefinite loop in
shrink_zone().
It meant to break out of this loop when no pages had been reclaimed and
not a single page was even scanned. The way it would detect the latter
is by taking a snapshot of sc->nr_scanned at the beginning of the
function and comparing it against the new sc->nr_scanned after the scan
loop. But it would re-iterate without updating that snapshot, looping
forever if sc->nr_scanned changed at least once since shrink_zone() was
invoked.
This is not the sole condition that would exit that loop, but it
requires other processes to change the zone state, as the reclaimer that
is stuck obviously can not anymore.
This is only happening for higher-order allocations, where reclaim is
run back to back with compaction.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Michal Hocko <mhocko@suse.cz>
Tested-by: Kent Overstreet<kent.overstreet@gmail.com>
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
