Commit graph

1365 commits

Author SHA1 Message Date
Greg Kroah-Hartman
c10997f657 Kobject: convert drivers/* from kobject_unregister() to kobject_put()
There is no need for kobject_unregister() anymore, thanks to Kay's
kobject cleanup changes, so replace all instances of it with
kobject_put().


Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:40 -08:00
Greg Kroah-Hartman
23b9c1ab5b Infiniband: make ipath driver use default driver groups.
Make the ipath driver use the new driver functions so that it does not
touch the sysfs portion of the driver structure.

We also remove the redundant symlink from the device back to the driver,
as it is already in the sysfs tree.  Any userspace tools should be using
the standard symlink, not some driver specific one.

Cc: Roland Dreier <rdreier@cisco.com>
Cc: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: Arthur Jones <arthur.jones@qlogic.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:34 -08:00
Greg Kroah-Hartman
35be068198 Kobject: change drivers/infiniband to use kobject_init_and_add
Stop using kobject_register, as this way we can control the sending of
the uevent properly, after everything is properly initialized.

Cc: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <mshefty@ichips.intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:26 -08:00
Ralph Campbell
0a69631b28 IB/ipath: Fix receiving UD messages with immediate data
This fixes a small bug in ipath_ud_rcv()'s handling of UD messages
with immediate data.  We need to test whether immediate data is
present and update the header size accordingly *before* testing the
packet size from the header against the actual received length.
Otherwise the wrong header size will be used and all messages with
immediate data will be dropped.

This bug keeps MVAPICH-UD and HP MPI from working at all on ipath devices.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-16 14:42:35 -08:00
Dave Dillow
ad696989b4 IB/srp: Release transport before removing host
The documented call sequence for removing a host is to call the
transport xxx_remove_host() prior to scsi_remove_host(). The SRP
transport used to crash when that order was followed, but as it is now
fixed, use the documented order.

Signed-off-by: David Dillow <dillowda@ornl.gov>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-08 12:08:10 -08:00
Dotan Barak
e1bb7843e4 IB/mlx4: Fix value of pkey_index in QP1 completions
Fix the value of pkey_index in completions to get a valid value for
GSI QPs.  Without this fix, incoming GSI packets on port 2 get an
invalid P_Key index in the completion, which prevents the MAD layer
from sending back a response, which can make the second port of
ConnectX HCAs completely useless.

Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-08 12:05:53 -08:00
David Dillow
b0e47c8b79 IB/srp: Fix list corruption/oops on module reload
Add a missing call to srp_remove_host() in srp_remove_one() so that we 
don't leak SRP transport class list entries.

Tested-by: David Dillow <dillowda@ornl.gov>
Acked-by: FUJITA Tomonori <tomof@acm.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-03 10:25:27 -08:00
Joachim Fenkes
3d758a4a48 IB/ehca: Fix lock flag variable location, bump version number
Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-12-13 09:37:23 -08:00
Joachim Fenkes
4faf775795 IB/ehca: Serialize HCA-related hCalls if necessary
Several pSeries firmware versions share a rare locking issue in the
HCA-related hCalls. Check for a feature flag that indicates the issue
being fixed and serialize all HCA hCalls if not.

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-12-12 14:09:43 -08:00
Joachim Fenkes
1457edc72d IB/ehca: Return correct number of SGEs for SRQ
Firmware would round up the number of SGEs to four, because the WQE
structure holds four SGEs. For SRQ, only three are supported, so return
a fixed value instead.

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-12-12 14:09:43 -08:00
Joachim Fenkes
b1812582ba IB/ehca: Fix static rate if path faster than link
The formula would yield -1 if the path is faster than the link, which
is wrong in a bad way (max throttling).  Clamp to 0, which is the
correct value.

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-30 16:19:41 -08:00
Jack Morgenstein
1401b53acc IPoIB: Fix oops if xmit is called when priv->broadcast is NULL
If a port goes down, ipoib_ib_dev_down() is invoked -- which flushes
the mcasts (clearing priv->broadcast) and clearing the path record
cache.  If ipoib_start_xmit() is then invoked (before the broadcast
group is rejoined), a kernel oops results from attempting to access
priv->broadcast, which is still unset.

Returning NULL from path_rec_create() if priv->broadcast is NULL is a
harmless way of bypassing the problem -- the offending packet is
simply discarded "without prejudice."

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-27 15:40:10 -08:00
Erez Zilber
a316b79c33 IB/iser: Add missing counter increment in iser_data_buf_aligned_len()
While adding sg chaining support to iSER, a "for" loop was replaced
with a "for_each_sg" loop. The "for" loop included the incrementation
of 2 variables. Only one of them is incremented in the current
"for_each_sg" loop. This caused iSER to think that all data is
unaligned, and all data was copied to aligned buffers.

This patch increments the missing counter inside the "for_each_sg"
loop whenever necessary.

Signed-off-by: Erez Zilber <erezz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-24 13:50:39 -08:00
Joachim Fenkes
3fe2ed344d IB/ehca: Fix static rate regression
Wrong choice of port number caused modify_qp() to fail -- fixed.

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-24 13:47:59 -08:00
Ralph Campbell
4187b915a0 IB/ipath: Normalize error return codes for posting work requests
The error codes for ib_post_send(), ib_post_recv(), and ib_post_srq_recv()
were inconsistent. Use EINVAL for too many SGEs and ENOMEM for too many
WRs.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-20 11:05:42 -08:00
Ralph Campbell
14de986a0b IB/ipath: Fix offset returned to ibv_modify_srq()
The wrong offset was being returned to libipathverbs so that when
ibv_modify_srq() calls mmap(), it always fails.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-20 11:04:41 -08:00
Ralph Campbell
8a278e6d57 IB/ipath: Fix error path in QP creation
This patch fixes the code which frees the partially allocated QP
resources if there was an error while creating the QP. In particular,
the QPN wasn't deallocated and the QP wasn't removed from the hash
table.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-20 11:04:10 -08:00
Ralph Campbell
fb74dacb0f IB/ipath: Fix offset returned to ibv_resize_cq()
The wrong offset was being returned to libipathverbs so that when
ibv_resize_cq() calls mmap(), it always fails.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-20 11:03:26 -08:00
Steve Wise
9a7666494b RDMA/cxgb3: Set the max_qp_init_rd_atom attribute in query_device
The device attribute max_qp_init_rd_atom is not getting set in cxgb3's
query_device method.  Version 1.0.4 of librdmacm now validates the
user's requested initiator and responder resources against the max
supported by the device.  Since iw_cxgb3 wasn't setting this attribute
(and it defaulted to 0), all rdma_connect()s fail if there are
initiator resources requested by the app.  Fix this by setting the
correct value in iwch_query_device().

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-13 15:27:00 -08:00
Joachim Fenkes
51aaa54eb9 IB/ehca: Fix static rate calculation
The IPD (inter-packet delay) formula was a little off and assumed a
fixed physical link rate; fix the formula and query the actual
physical link rate, now that we can get it.  Also, refactor the
calculation into a common function ehca_calc_ipd() and use that
instead of duplicating code.

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-13 15:27:00 -08:00
Joachim Fenkes
40ebb5615e IB/ehca: Return physical link information in query_port()
Newer firmware versions return physical port information to the
partition, so hand that information to the consumer if it's present.

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-13 15:26:59 -08:00
Ralph Campbell
f4ad1bcc44 IB/ipath: Fix race with ACK retry timeout list management
When an ACK is received, the QP is removed from the timeout list and
then if there are still pending send WQEs, the QP is put back on the
timeout list. It is possible that another post send has put the QP on
the timeout list thus, a check needs to be made before trying to do it
again or the list is corrupted.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-13 15:26:58 -08:00
Ralph Campbell
a6e7550d8f IB/ipath: Fix memory leak in ipath_resize_cq() if copy_to_user() fails
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Patrick Marchand Latifi <patrick.latifi@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-13 15:26:57 -08:00
Linus Torvalds
53173920da Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/fmr_pool: Stop ib_fmr threads from contributing to load average
  IB/ipath: Fix incorrect use of sizeof on msg buffer (function argument)
  IB/ipath: Limit length checksummed in eeprom
  IB/ipath: Fix a race where s_last is updated without lock held
  IB/mlx4: Lock SQ lock in mlx4_ib_post_send()
  IPoIB/cm: Fix receive QP cleanup
2007-10-30 15:26:56 -07:00
Anton Blanchard
3f776e8a25 IB/fmr_pool: Stop ib_fmr threads from contributing to load average
I noticed my machine was at a constant load average of 1. This was
because ib_create_fmr_pool calls kthread_create but does not
immediately wake the thread up.

Change to using kthread_run so we enter ib_fmr_cleanup_thread(), set
TASK_INTERRUPTIBLE, then go to sleep.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-30 14:57:43 -07:00
Dave Olson
164ef7a252 IB/ipath: Fix incorrect use of sizeof on msg buffer (function argument)
Inside a function declared as

    void foo(char bar[512])

the value of sizeof bar is the size of a pointer, not 512.  So avoid
constructions like this by passing the size explicitly.

Also reduce the size of the buffer to 128 bytes (512 was overly generous).

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-30 11:05:49 -07:00
Michael Albaugh
627934448e IB/ipath: Limit length checksummed in eeprom
The small eeprom that holds the GUID etc. contains a data-length, but if 
the actual eeprom is new or has been erased, that byte will be 0xFF,
which is greater than the maximum physical length of the eeprom, and
more importantly greater than the length of the buffer we vmalloc'd.
Sanity-check the length to avoid the possbility of reading past end of
buffer.

Signed-off-by: Michael Albaugh <Michael.Albaugh@Qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-30 10:58:53 -07:00
Ralph Campbell
fffbfeaa68 IB/ipath: Fix a race where s_last is updated without lock held
There is a small window where a send work queue entry could be
overwritten by ib_post_send() because s_last is updated before the
entry is read.

This patch closes the window by acquiring the lock and updating
the last send work queue entry index after reading the wr_id.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-30 10:57:24 -07:00
Roland Dreier
96db0e0335 IB/mlx4: Lock SQ lock in mlx4_ib_post_send()
Because of a typo, mlx4_ib_post_send() takes the same lock rq.lock as
mlx4_ib_post_recv().  Correct the code so the intended sq.lock is
taken when posting a send.

Noticed by Yossi Leybovitch and pointed out by Jack Morgenstein from
Mellanox.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-30 10:53:54 -07:00
Roland Dreier
09f60f8f54 IPoIB/cm: Fix receive QP cleanup
Commit 1b524963 ("IPoIB/cm: Use common CQ for CM send completions")
changed how the high-order bits of work request IDs were used, which
had the effect that IPOIB_CM_RX_DRAIN_WRID was no longer handled as a
connected mode receive completion.  This leads to the messages

    ib1: cm send completion event with wrid 1073741823 (> 64)
    ib1: RX drain timing out

when an interface with connected mode QPs is brought down.  Fix this
by making sure that both IPOIB_OP_CM and IPOIB_OP_RECV are set in
IPOIB_CM_RX_DRAIN_WRID.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-26 13:44:25 -07:00
Jens Axboe
642f149031 SG: Change sg_set_page() to take length and offset argument
Most drivers need to set length and offset as well, so may as well fold
those three lines into one.

Add sg_assign_page() for those two locations that only needed to set
the page, where the offset/length is set outside of the function context.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-24 11:20:47 +02:00
Linus Torvalds
0b776eb542 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  mlx4_core: Increase command timeout for INIT_HCA to 10 seconds
  IPoIB/cm: Use common CQ for CM send completions
  IB/uverbs: Fix checking of userspace object ownership
  IB/mlx4: Sanity check userspace send queue sizes
  IPoIB: Rewrite "if (!likely(...))" as "if (unlikely(!(...)))"
  IB/ehca: Enable large page MRs by default
  IB/ehca: Change meaning of hca_cap_mr_pgsize
  IB/ehca: Fix ehca_encode_hwpage_size() and alloc_fmr()
  IB/ehca: Fix masking error in {,re}reg_phys_mr()
  IB/ehca: Supply QP token for SRQ base QPs
  IPoIB: Use round_jiffies() for ah_reap_task
  RDMA/cma: Fix deadlock destroying listen requests
  RDMA/cma: Add locking around QP accesses
  IB/mthca: Avoid alignment traps when writing doorbells
  mlx4_core: Kill mlx4_write64_raw()
2007-10-23 09:56:11 -07:00
Olof Johansson
c8ac5a7309 IB/ehca: Fix sg_page() fallout
More fallout from sg_page changes:

drivers/infiniband/hw/ehca/ehca_mrmw.c: In function 'ehca_set_pagebuf_user1':
drivers/infiniband/hw/ehca/ehca_mrmw.c:1779: error: 'struct scatterlist' has no member named 'page'
drivers/infiniband/hw/ehca/ehca_mrmw.c: In function 'ehca_check_kpages_per_ate':
drivers/infiniband/hw/ehca/ehca_mrmw.c:1835: error: 'struct scatterlist' has no member named 'page'
drivers/infiniband/hw/ehca/ehca_mrmw.c: In function 'ehca_set_pagebuf_user2':
drivers/infiniband/hw/ehca/ehca_mrmw.c:1870: error: 'struct scatterlist' has no member named 'page'

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-23 09:12:52 +02:00
Jens Axboe
45711f1af6 [SG] Update drivers to use sg helpers
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-22 21:19:53 +02:00
Michael S. Tsirkin
1b524963fd IPoIB/cm: Use common CQ for CM send completions
Use the same CQ for CM send completions as for all other IPoIB
completions.  This means all completions are processed via the same
NAPI polling routine.  This should help reduce the number of
interrupts for bi-directional traffic (such as TCP) and fixes "driver
is hogging interrupts" errors reported for IPoIB send side, e.g.
<https://bugs.openfabrics.org/show_bug.cgi?id=508>

To do this, keep a per-interface counter of outstanding send WRs, and
stop the interface when this counter reaches the send queue size to
avoid CQ overruns.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-19 21:39:34 -07:00
Roland Dreier
cbfb50e6e2 IB/uverbs: Fix checking of userspace object ownership
Commit 9ead190b ("IB/uverbs: Don't serialize with ib_uverbs_idr_mutex")
rewrote how userspace objects are looked up in the uverbs module's
idrs, and introduced a severe bug in the process: there is no checking
that an operation is being performed by the right process any more.
Fix this by adding the missing check of uobj->context in __idr_get_uobj().

Apparently everyone is being very careful to only touch their own
objects, because this bug was introduced in June 2006 in 2.6.18, and
has gone undetected until now.

Cc: stable <stable@kernel.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-19 20:01:43 -07:00
Anton Arapov
a25de534f8 [INET]: Justification for local port range robustness.
There is a justifying patch for Stephen's patches. Stephen's patches
disallows using a port range of one single port and brakes the meaning
of the 'remaining' variable, in some places it has different meaning.
My patch gives back the sense of 'remaining' variable. It should mean
how many ports are remaining and nothing else. Also my patch allows
using a single port.

  I sure we must be able to use mentioned port range, this does not
restricted by documentation and does not brake current behavior.

usefull links:
Patches posted by Stephen Hemminger
  http://marc.info/?l=linux-netdev&m=119206106218187&w=2
  http://marc.info/?l=linux-netdev&m=119206109918235&w=2

Andrew Morton's comment
  http://marc.info/?l=linux-kernel&m=119248225007737&w=2

1. Allows using a port range of one single port.
2. Gives back sense of 'remaining' variable.

Signed-off-by: Anton Arapov <aarapov@redhat.com>
Acked-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-18 22:00:17 -07:00
Joe Perches
898eb71cb1 Add missing newlines to some uses of dev_<level> messages
Found these while looking at printk uses.

Add missing newlines to dev_<level> uses
Add missing KERN_<level> prefixes to multiline dev_<level>s
Fixed a wierd->weird spelling typo
Added a newline to a printk

Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Tilman Schmidt <tilman@imap.cc>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: James Smart <James.Smart@Emulex.Com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:28 -07:00
Jack Morgenstein
839041329f IB/mlx4: Sanity check userspace send queue sizes
Add sanity checks to send queue sizes passed in from userspace. The
minimum sq stride value below is taken from the MT25408 PRM (section
11.10, Table 306, log_sq_stride definition).

Without this check, userspace can submit arbitrarily large/small
values for the number of WQEs and the stride, which can crash the
kernel.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-18 09:27:26 -07:00
Roland Dreier
fd312561ad IPoIB: Rewrite "if (!likely(...))" as "if (unlikely(!(...)))"
It's too hard to figure out what "!likely(...)" really means, and who
knows how compilers interpret the hint.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-17 21:54:44 -07:00
Joachim Fenkes
8da9ee9c1e IB/ehca: Enable large page MRs by default
Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-17 21:47:47 -07:00
Joachim Fenkes
abc39d3672 IB/ehca: Change meaning of hca_cap_mr_pgsize
ehca_shca.hca_cap_mr_pgsize now contains all supported page sizes ORed
together. This makes some checks easier to code and understand, plus
we can return this value verbatim in query_hca(), fixing a problem
with SRP (reported by Anton Blanchard -- thanks!).

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-17 21:47:24 -07:00
Joachim Fenkes
8c08d50d4f IB/ehca: Fix ehca_encode_hwpage_size() and alloc_fmr()
Simplify ehca_encode_hwpage_size(), fixing an infinite loop for pgsize == 0
in the process. Fix the bug in alloc_fmr() that triggered the loop.

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-17 21:46:37 -07:00
Joachim Fenkes
9511724da9 IB/ehca: Fix masking error in {,re}reg_phys_mr()
Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-17 21:45:56 -07:00
Joachim Fenkes
c0c84d566d IB/ehca: Supply QP token for SRQ base QPs
Because hardware reports the SRQ token in RWQEs of SRQ base QPs, supply the
base QP token as SRQ token, so we can properly find the SRQ base QP.

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-17 21:45:17 -07:00
Joachim Fenkes
6b08f3ae8e [POWERPC] ibmebus: Move to of_device and of_platform_driver, match eHCA and eHEA drivers
Replace struct ibmebus_dev and struct ibmebus_driver with struct of_device
and struct of_platform_driver, respectively.  Match the external ibmebus
interface and drivers using it.

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Roland Dreier <rolandd@cisco.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-17 22:30:08 +10:00
Anton Blanchard
69fc507a14 IPoIB: Use round_jiffies() for ah_reap_task
Use round_jiffies() to align the 1 second ah_reap_task with other work
and potentially save power by sleeping cores for longer.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-16 12:28:56 -07:00
Sean Hefty
d02d1f5359 RDMA/cma: Fix deadlock destroying listen requests
Deadlock condition reported by Kanoj Sarcar <kanoj@netxen.com>.
The deadlock occurs when a connection request arrives at the same
time that a wildcard listen is being destroyed.

A wildcard listen maintains per device listen requests for each
RDMA device in the system.  The per device listens are automatically
added and removed when RDMA devices are inserted or removed from
the system.

When a wildcard listen is destroyed, rdma_destroy_id() acquires
the rdma_cm's device mutex ('lock') to protect against hot-plug
events adding or removing per device listens.  It then tries to
destroy the per device listens by calling ib_destroy_cm_id() or
iw_destroy_cm_id().  It does this while holding the device mutex.

However, if the underlying iw/ib CM reports a connection request
while this is occurring, the rdma_cm callback function will try
to acquire the same device mutex.  Since we're in a callback,
the ib_destroy_cm_id() or iw_destroy_cm_id() calls will block until
their callback thread returns, but the callback is blocked waiting for
the device mutex.

Fix this by re-working how per device listens are destroyed.  Use
rdma_destroy_id(), which avoids the deadlock, in place of
cma_destroy_listen().  Additional synchronization is added to handle
device hot-plug events and ensure that the id is not destroyed twice.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-16 12:25:49 -07:00
Sean Hefty
c5483388bb RDMA/cma: Add locking around QP accesses
If a user allocates a QP on an rdma_cm_id, the rdma_cm will automatically
transition the QP through its states (RTR, RTS, error, etc.)  While the
QP state transitions are occurring, the QP itself must remain valid.
Provide locking around the QP pointer to prevent its destruction while
accessing the pointer.

This fixes an issue reported by Olaf Kirch from Oracle that resulted in
a system crash:

"An incoming connection arrives and we decide to tear down the nascent
 connection.  The remote ends decides to do the same.  We start to shut
 down the connection, and call rdma_destroy_qp on our cm_id. ... Now
 apparently a 'connect reject' message comes in from the other host,
 and cma_ib_handler() is called with an event of IB_CM_REJ_RECEIVED.
 It calls cma_modify_qp_err, which for some odd reason tries to modify
 the exact same QP we just destroyed."

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-16 12:25:00 -07:00
Jens Axboe
53d412fce0 infiniband: sg chaining support
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:20:59 +02:00