This is one of the exceptions to the 80 chars per line rule since breaking the
string in half it badly affects the grep-ability.
Fixes the following checkpatch warning:
WARNING: quoted string split across lines
#203: FILE: staging/iio/gyro/adxrs450_core.c:203:
+ dev_warn(&st->us->dev, "The initial power on response "
+ "is not correct! Restart without reset?\n");
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reflow two lines to meet the 80 characters per line limit.
Fixes the following checkpatch warnings:
WARNING: line over 80 characters
#29: FILE: staging/iio/gyro/adxrs450_core.c:29:
+ * @reg_address: the address of the lower of the two registers,which should be an even address,
WARNING: line over 80 characters
#81: FILE: staging/iio/gyro/adxrs450_core.c:81:
+ * @reg_address: the address of the lower of the two registers,which should be an even address,
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Don't spam the bootlog with the devices part id and serial number.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Instead of silently discarding the upper bits reject out of range values for the
calibscale property.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The calibbias (DNC) register contains a 10-bit twos complement value. Perform a
proper sign extension when reading the register, otherwise negative will
incorrectly be displayed as large positive values.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This partially reverts commit cb4496876f. There is
no apparent reason why we should split a transaction which consists out of
multiple transfers into multiple transactions each having one transfer. While
this works it introduces a bunch of unnecessary context switch and additional
setup costs.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This driver is simple, uses the latest interfaces and contains few if
any controversial elements. All of its interfaces have been in place
for a long time now. Hence let's move it out of staging.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Peter Meerwald <pmeerw@pmeerw.net>
A rather over complicated exit path given there is only one exit
route and nothing much is done after it.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Peter Meerwald <pmeerw@pmeerw.net>
Fix formatting of some comments and drop a few generic information
free ones.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Peter Meerwald <pmeerw@pmeerw.net>
The driver is rather simple and in a good shape. It follows the IIO ABI and the
standard codechecker tools do not report any issues, so move it out of staging.
While moving it also remove one outdated 'fixme' comment.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Report scale and offset for the velocity, voltage and temperature channels.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
All sections in which the transfer buffer is accessed are already protected by
the IIO device's mlock. So we do not need the extra mutex protecting the buffer.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The sample buffer contains big endian 16bit words. So use the be16 datatype for
the buffer and use the proper helper functions for endianness conversion instead
of openconding it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
During sampling the driver currently does a spi_read followed by a spi_write.
This is not a problem per se, since CS needs to be deasserted between the two
transfers. So even if another device claims the bus between the two transfers we
should still get a result. But the code is actually spread out over multiple
functions. E.g. the spi_read happens in one function the spi_write in another,
this makes the code harder to follow. This patch re-factors the code to just use
a single spi transaction to do both the read and the write transfer.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The adis16100 is very similar to the adis16080. The driver description already
states that the driver supports the adis16100 as-well. But so far the there is
no device id table for the adis16100 and the drivers does not bind to a device
named adis16100.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch adds support for i.MX23 into the LRADC driver. The LRADC
block on MX23 is not much different from the one on MX28, thus this
is only a few changes fixing the parts that are specific to MX23.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
found with coccicheck
sizeof when applied to a pointer typed expression gives the size of
the pointer
The semantic patch that makes this output is available
in scripts/coccinelle/misc/noderef.cocci.
More information about semantic patching is available at
http://coccinelle.lip6.fr/
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Remove an unneeded initialization and trivial reorder to ensure
the device is ready when the device is registered.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Whilst this is IIO's oldest buffer implementation it is messy, poorly
implemented and whilst it works, no one is entirely sure it always will.
New IIO drivers have not been using this for some time and now all remaining
old users have been converted to use the kfifo based alternative.
Clearly a fifo isn't the same as a ring buffer but in many use cases it
really doesn't matter. We also loose the watershed based poll implementation.
However having poll effectively report data only when the buffer was half
full was at best an 'unusual' use of the interface.
At somepoint in the future we may bring watersheds back on a different
buffer implementation, but then we will think a lot more about how to do
the interface first.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
sw ring is going away so switch over to kfifo based buffer implementation.
The only real change is that poll will return on some data there rather than
buffer 50% full.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The sw_ring buffer is being removed in favour of the kfifo version.
This is one of only a couple of driver still supporting its use.
This driver will hopefully also be removed in favour of supporting the
part in the unified ST accelerometer driver.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This adis16400 driver is in pretty good shape now, so move it out of staging.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Do a set of minor miscellaneous code style cleanups for the adis16400 before
moving it out of staging. Delete outdated comments, removed excess whitespace,
add missing whitespace, replace u{8,16} with uint{8,16}_t.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
While the samplerate supported by the devices which are supported by this driver
is not continuous it supports a wide range, much more than currently listed in
the samplerate_available attribute. Also it accepts all values written to the
samplerate attribute and will round-up them to the nearest supported sample
rate. So remove the samplerate_available attribute.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
To be compliant to the IIO specification we should not include the "SPS" suffix
in the "samplerate" attribute contents.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Similar to like we already did for the generic adis library preallocate and
pre-construct the SPI transfer message for the adis16400. For devices which do
not support burst mode sampling does not differ from other adis devices and so
we use the generic functions of the adis library in this case. In burst mode we
can only sample all channels at once, so use the IIO cores demux facility
instead of doing this manually.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Most of the channels declared in the adis16400 driver look quite similar. This
patch adds a bunch of helper macros to initialize the channel spec for this
driver. This allows us to drastically reduce the number of lines of code needed
for the channel spec declaration.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Use the triggered buffer helper functions to setup and tear down the buffer for
the adis16400 instead of doing this manually. This also means that we switch
away from the deprecated sw_ring buffer and use the kfifo buffer now instead.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Use the new adis library for the adis16400 driver. This allows us to completely
scrap the adis16400 trigger code and more than half of the core driver code. For
now we can not make use of the generic adis buffer implementation since the
adis16400 driver has special requirements due to its burst mode support. But
we will eventually get to this.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The chip_info struct for contains a defaul_scan_mask field. But it is never
actually used in the code, so remove it from the chip_info struct.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The 3db divisors table is partially wrong and incomplete. Also the code rounds
up to the next higher frequency if the requested frequency would matches one of
the available frequencies. These two issues are fixed by this patch. The patch
also changes the driver to round down the filter frequency if it is larger than
the largest supported frequency instead of rejecting it as an invalid value.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
ilog2 is not defined for 0, so we need to handle the case where the requested
frequency is larger than the base sampling rate. In this case we'll round down
and set the sampling rate to the base sampling rate.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The tsl2x7x driver has a copy'n'pasted version of the iio_str_to_fixedpoint()
function from the IIO core. Replace this custom copy and use
iio_str_to_fixedpoint instead.
The patch also introduces a slight functional change in that it makes sure that
in case of a parsing error the error is reported back to userspace instead of
silently ignoring it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jon Brenner <jon.brenner@ams.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch implements support for sampling of a touchscreen into
the MXS LRADC driver. The LRADC block allows configuring some of
it's channels into special mode where they either output the drive
voltage or sample it, allowing it to operate a 4-wire or 5-wire
resistive touchscreen.
In case the touchscreen mode is enabled, the LRADC slot #7 is
reserved for touchscreen only, therefore it is not possible to
sample 8 LRADC channels at time, but only 7 channels.
The touchscreen controller is configured such that the PENDOWN event
disables touchscreen interrupts and triggers execution of worker
thread, which then polls the touchscreen controller for X, Y and
Pressure values. This reduces the overhead of interrupt-driven
operation. Upon the PENUP event, the worker thread re-enables the
PENDOWN detection interrupt and exits.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Commit a301d425e ("staging:iio:gyro remove adis16251 driver as now supported by
adis16260 driver") removed the adis16251, but left its Makefile entry intact.
This patch removes the unused Makefile entry.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The adis16080 reports sample values in twos complement. So we need to perform a
sign extension on the result, otherwise negative values will be reported
incorrectly as large positive values.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Fix the following warning when building with W=1 option:
drivers/staging/iio/adc/mxs-lradc.c: In function 'mxs_lradc_trigger_handler':
drivers/staging/iio/adc/mxs-lradc.c:244:2: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This is to get the comedi fixes, and resolve the issue in comdi_test.c
and comedi_fops.c that were caused by changes in both branches.
It also allows the fwserial driver changes to be applied, as they
required the fixes that are in staging-linus.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This structure definition seems to be some kind of remnant from
previous development that accidentally made it mainline. Remove
it as it's unused.
Remove unused "enable" field from struct mxs_lradc as well. This
seems to be remnant of early development too.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Commit 9d5e9fdf ("staging:iio:adis16260: Use adis library") switched over the
adis16260 driver to use the common adis library but neglected to update the
Kconfig entry to reflect the change.
This leads to the following compile error if no other driver selects the adis
library:
drivers/built-in.o: In function `adis16260_write_frequency':
adis16260_core.c:(.text+0x5a83bf): undefined reference to `adis_write_reg_8'
drivers/built-in.o: In function `adis16260_read_frequency':
adis16260_core.c:(.text+0x5a8433): undefined reference to `adis_read_reg_16'
drivers/built-in.o: In function `adis16260_write_raw':
adis16260_core.c:(.text+0x5a8538): undefined reference to `adis_write_reg_16'
adis16260_core.c:(.text+0x5a856b): undefined reference to `adis_write_reg_16'
drivers/built-in.o: In function `adis16260_read_raw':
adis16260_core.c:(.text+0x5a85d3): undefined reference to `adis_single_conversion'
adis16260_core.c:(.text+0x5a873e): undefined reference to `adis_read_reg_16'
adis16260_core.c:(.text+0x5a87fb): undefined reference to `adis_read_reg_16'
drivers/built-in.o: In function `adis16260_probe':
adis16260_core.c:(.devinit.text+0x5c6b8): undefined reference to `adis_init'
adis16260_core.c:(.devinit.text+0x5c799): undefined reference to `adis_initial_startup'
drivers/built-in.o: In function `adis16260_remove':
adis16260_core.c:(.devexit.text+0x9943): undefined reference to `adis_write_reg_16'
This patch updates the adis16260 Kconfig entry to select the adis library.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The driver does not expose any custom API to userspace and none of the standard
static code checker tools report any issues, so move it out of staging.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Instead of checking whether the id of the current device matches the id of any
device supported by the driver, check whether it matches the id of the device
which the driver was instantiated for. This makes sure that the driver is not
accidentally instantiated for the wrong device.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The only user of the register definitions is the driver itself, so move them
from the header file to the driver source file. The header file now only
contains the platform data struct.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
