early_init_mmu_secondary() is called at CPU hotplug time, so it
must be marked as __cpuinit, not __init.
Caused by 757c74d2 ("powerpc/mm: Introduce early_init_mmu() on 64-bit").
Tested-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
ColdFire CPU family members support DMA (all those with the FEC ethernet
core use it, the rest have dedicated DMA engines). The code support is
just missing a handful of routines for it to be usable by drivers.
Add the missing dma_ functions.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
The irq field of the kernel stats struct is not used by the assembly
support code, so remove it from the offsets.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
This processor only have one FEC and its MDIO pins are
located at a different offset than the code used for
the current CONFIG_M527x.
Tesed on M5271EVB eval platform.
Without this patch the FEC driver will report no PHY attached
if the bootloader does not pre-initialize the PAR_FECI2C GPIO register.
Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
In non-SMP mode, the variable section attribute specified by DECLARE_PER_CPU()
does not agree with that specified by DEFINE_PER_CPU(). This means that
architectures that have a small data section references relative to a base
register may throw up linkage errors due to too great a displacement between
where the base register points and the per-CPU variable.
On FRV, the .h declaration says that the variable is in the .sdata section, but
the .c definition says it's actually in the .data section. The linker throws
up the following errors:
kernel/built-in.o: In function `release_task':
kernel/exit.c:78: relocation truncated to fit: R_FRV_GPREL12 against symbol `per_cpu__process_counts' defined in .data section in kernel/built-in.o
kernel/exit.c:78: relocation truncated to fit: R_FRV_GPREL12 against symbol `per_cpu__process_counts' defined in .data section in kernel/built-in.o
To fix this, DECLARE_PER_CPU() should simply apply the same section attribute
as does DEFINE_PER_CPU(). However, this is made slightly more complex by
virtue of the fact that there are several variants on DEFINE, so these need to
be matched by variants on DECLARE.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
$ cat x86-more-than-8-cpus-requires-bigsmp.patch
Enforce NR_CPUS <= 8 limitation if X86_BIGSMP not set
Configuring more than 8 logical CPUs on 32-bit x86 requires
X86_BIGSMP to be set in order to boot successfully, if more than 8
logical CPUs are actually found at boot time. The X86_BIGSMP help
text describes that it is required to be set if more than 8 CPUs
are configured, but this was previously not enforced.
This configuration error has affected multiple distributions:
https://bugzilla.redhat.com/show_bug.cgi?id=480844https://issues.rpath.com/browse/RPL-3022
Signed-off-by: Michael K Johnson <johnsonm@rpath.com>
LKML-Reference: <20090422014448.GB32541@logo.rdu.rpath.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Since the vast majority of 85xx platforms are UP we introduce a new SMP
config for the few platforms that have more than one core. Beyond
CONFIG_SMP=y and its dependencies this should be identical to
mpc85xx_defconfig.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Got this warning from Kconfig:
boolean symbol INPUT tested for 'm'? test forced to 'n'
because INPUT is tristate, not bool.
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Insert PCI root bus resources for the FRV-based MB93090 development kit
motherboard. This is required because the CPU's window onto the PCI bus
address space is considerably smaller than the CPU's full address space
and non-PCI devices lie outside of the PCI window that we might want to
access.
Without this patch, the PCI root bus uses the platform-level bus
resources, and these are then confined to the PCI window, thus making
platform_device_add() reject devices outside of this window.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pass clocksource pointer to the read() callback for clocksources. This
allows us to share the callback between multiple instances.
[hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods]
[akpm@linux-foundation.org: cleanup]
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The ULI 1575 PCI quirk function for the Freescale MPC8610 HPCD was disabling
the SATA INTx interrupt, even when SATA support was enabled. This was safe,
because the SATA driver re-enabled it. But with commit a5bfc471 ("ahci: drop
intx manipulation on msi enable"), the driver no longer does this, and so SATA
support on the 8610 HPCD is broken.
The original quirk function disabled INTx because it caused some other
interrupt problem during early development on this board, but no one remembers
any more what that problem was, and it doesn't seem to occur any more.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
The driver should pass a device that specifies internal DMA ops, but
currently NULL pointer is passed, therefore following bug appears
during boot up:
------------[ cut here ]------------
Kernel BUG at c0018a7c [verbose debug info unavailable]
Oops: Exception in kernel mode, sig: 5 [#1]
[...]
NIP [c0018a7c] fsl_rio_doorbell_init+0x34/0x60
LR [c0018a70] fsl_rio_doorbell_init+0x28/0x60
Call Trace:
[ef82bda0] [c0018a70] fsl_rio_doorbell_init+0x28/0x60 (unreliable)
[ef82bdc0] [c0019160] fsl_rio_setup+0x6b8/0x84c
[ef82be20] [c02d28ac] fsl_of_rio_rpn_probe+0x30/0x50
[ef82be40] [c0234f20] of_platform_device_probe+0x5c/0x84
[...]
---[ end trace 561bb236c800851f ]---
This patch fixes the issue.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
reiserfs: fix j_last_flush_trans_id type
fs: Mark get_filesystem_list() as __init function.
kill vfs_stat_fd / vfs_lstat_fd
Separate out common fstatat code into vfs_fstatat
ecryptfs: use memdup_user()
ncpfs: use memdup_user()
xfs: use memdup_user()
sysfs: use memdup_user()
btrfs: use memdup_user()
xattr: use memdup_user()
autofs4: use memchr() in invalid_string()
Documentation/filesystems: remove out of date reference to BKL being held
Fix i_mutex vs. readdir handling in nfsd
fs/compat_ioctl: fix build when !BLOCK
Fix autofs_expire()
No need for crossing to mountpoint in audit_tag_tree()
Safer nfsd_cross_mnt()
Touch all affected namespaces on propagation of mount
Fix AUTOFS_DEV_IOCTL_REQUESTER_CMD
In theory (though not shown in practice) alloc_cpumask_var() doesn't zero
memory, so CPUs might print an "NMI backtrace for cpu %d" once on boot.
(Bug introduced in fcef8576d8).
[ Impact: avoid theoretical syslog noise in rare configs ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <alpine.DEB.2.00.0904202113520.10097@gandalf.stny.rr.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fcef8576d8 converted backtrace_mask to a
cpumask_var_t, and assumed check_nmi_watchdog was called before
nmi_watchdog_tick was ever called. Steven's oops shows I was wrong.
This is something of a bandaid: I'm not sure we *should* be calling
nmi_watchdog_tick before check_nmi_watchdog. Note that gcc eliminates
this test for the CONFIG_CPUMASK_OFFSTACK=n case.
[ Impact: fix boot crash in rare configs ]
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <alpine.DEB.2.00.0904202113520.10097@gandalf.stny.rr.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This is a version incorporating Christoph's suggestion.
Separate out common *fstatat functionality into a single function
instead of duplicating it all over the code.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
mmap2 uses a fixed page shift of 12, regardless of the PAGE_SIZE setting.
Fix up the mmap2 code to add some sanity checks on the mapping, and to
update pgoff accordingly.
Error handling bits based on 4280e3126f
("frv: fix mmap2 error handling").
Signed-off-by: Toshinobu Sugioka <sugioka@itonet.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
In 64bit signal delivery path, clear_used_math() was happening before saving
the current active FPU state on to the user stack for signal handling. Between
clear_used_math() and the state store on to the user stack, potentially we
can get a page fault for the user address and can block. Infact, while testing
we were hitting the might_fault() in __clear_user() which can do a schedule().
At a later point in time, we will schedule back into this process and
resume the save state (using "xsave/fxsave" instruction) which can lead
to DNA fault. And as used_math was cleared before, we will reinit the FP state
in the DNA fault and continue. This reinit will result in loosing the
FPU state of the process.
Move clear_used_math() to a point after the FPU state has been stored
onto the user stack.
This issue is present from a long time (even before the xsave changes
and the x86 merge). But it can easily be exposed in 2.6.28.x and 2.6.29.x
series because of the __clear_user() in this path, which has an explicit
__cond_resched() leading to a context switch with CONFIG_PREEMPT_VOLUNTARY.
[ Impact: fix FPU state corruption ]
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: <stable@kernel.org> [2.6.28.x, 2.6.29.x]
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] fix allmodconfig compilation breakage.
[IA64] smp_flush_tlb_mm() should only send IPI's to cpus in cpu_vm_mask
[IA64] export smp_send_reschedule
This patch fixes the following compilation error caused by recursive
inclusion of kernel.h which defines BUILD_BUG_ON().
In this case, the case it catches will be caught by the case
CONFIG_PARAVIRT=n, so removing it would not hurt compile time check
very much. So fix the breakage by removing it.
CC arch/ia64/kernel/asm-offsets.s
In file included from include/linux/bitops.h:17,
from include/linux/kernel.h:15,
from include/linux/sched.h:52,
from arch/ia64/kernel/asm-offsets.c:9:
arch/ia64/include/asm/bitops.h: In function 'set_bit':
arch/ia64/include/asm/bitops.h:47: error: implicit declaration of function 'BUILD_BUG_ON'
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Fix endcase where the memory at physical address 0 does not really
exist AND one of the sockets on blade 0 has no active cpus.
The memory that _appears_ to be at physical address 0 is actually
memory that located at a different address but has been remapped by
the chipset so that it appears to be at physical address 0.
When determining the UV pnode, the algorithm for determining the pnode
incorrectly used the relocated physical address instead of the actual
(global) address.
[ Impact: boot failure on partitioned systems ]
Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20090420132530.GA23156@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Stop the FRV arch from attempting to #include <linux/blk.h> as it doesn't
exist.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
From: David Brownell <dbrownell@users.sourceforge.net>
Fix GPIO-related build error on mach-imx platform:
CC drivers/spi/spi_gpio.o
In file included from /home/db/kernel/scratch/arch/arm/include/asm/gpio.h:5,
from include/linux/gpio.h:7,
from drivers/spi/spi_gpio.c:23:
arch/arm/mach-imx/include/mach/gpio.h: In function 'imx_gpio_get_value':
arch/arm/mach-imx/include/mach/gpio.h:27: error: implicit declaration of function '__REG2'
arch/arm/mach-imx/include/mach/gpio.h:27: error: 'IMX_IO_BASE' undeclared (first use in this function)
arch/arm/mach-imx/include/mach/gpio.h:27: error: (Each undeclared identifier is reported only once
arch/arm/mach-imx/include/mach/gpio.h:27: error: for each function it appears in.)
arch/arm/mach-imx/include/mach/gpio.h: In function 'imx_gpio_set_value_inline':
arch/arm/mach-imx/include/mach/gpio.h:36: error: 'IMX_IO_BASE' undeclared (first use in this function)
arch/arm/mach-imx/include/mach/gpio.h:36: error: lvalue required as left operand of assignment
arch/arm/mach-imx/include/mach/gpio.h:38: error: lvalue required as left operand of assignment
...
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Kernel 2.6.30-rc1 added sys_preadv and sys_pwritev to most archs
but not ARM, resulting in
<stdin>:1421:2: warning: #warning syscall preadv not implemented
<stdin>:1425:2: warning: #warning syscall pwritev not implemented
This patch adds sys_preadv and sys_pwritev to ARM.
These syscalls simply take five long-sized parameters, so they
should have no calling-convention/ABI issues in the kernel.
Tested on armv5tel eabi using a preadv/pwritev test program posted
on linuxppc-dev earlier this month.
It would be nice to get this into the kernel before 2.6.30 final,
so that glibc's kernel version feature test for these syscalls
doesn't have to special-case ARM.
Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Take already available policy->cpuinfo.max_freq and get rid of acpi-cpufreq
specific max_freq variable.
This implies that P0 is always the highest frequency which should always
be true as ACPI spec says:
As a result, the zeroth entry describes the highest performance state
Signed-off-by: Thomas Renninger <trenn@suse.de>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
As a result of an off-by-1 error pcm990 leaves one unused GPIO number between
built-in GPIOs and the pca9536 extender. Fix it.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Firstly, this patch makes the palm27x asoc driver a little more sane. Also,
since all affected devices use GPIO95 as AC97_nRESET, this patch sets that
properly. Affected are PalmT5, TX and LifeDrive.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Fixes guest crash 'lguest: bad read address 0x4800000 len 256'
The new per-cpu allocator ends up handing a non-linear address to
write_gdt_entry. We do __pa() on it, and hand it to the host, which
kills us.
I've long wanted to make the hypercall "LOAD_GDT_ENTRY" to match the IDT
code, but had no pressing reason until now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: lguest@ozlabs.org
I hit the check_flags error of lockdep:
WARNING: at kernel/lockdep.c:2893 check_flags+0x1a7/0x1d0()
[...]
hardirqs last enabled at (12567): [<ffffffff8026206a>] local_bh_enable+0xaa/0x110
hardirqs last disabled at (12569): [<ffffffff80610c76>] int3+0x16/0x40
softirqs last enabled at (12566): [<ffffffff80514d2b>] lock_sock_nested+0xfb/0x110
softirqs last disabled at (12568): [<ffffffff8058454e>] tcp_prequeue_process+0x2e/0xa0
The check_flags warning of lockdep tells me that lockdep thought interrupts
were disabled, but they were really enabled.
The numbers in the above parenthesis show the order of events:
12566: softirqs last enabled: lock_sock_nested
12567: hardirqs last enabled: local_bh_enable
12568: softirqs last disabled: tcp_prequeue_process
12566: hardirqs last disabled: int3
int3 is a breakpoint!
Examining this further, I have CONFIG_NET_TCPPROBE enabled which adds
break points into the kernel.
The paranoid_exit of the return of int3 does not account for enabling
interrupts on return to kernel. This code is a bit tricky since it
is also used by the nmi handler (when lockdep is off), and we must be
careful about the swapgs. We can not call kernel code after the swapgs
has been performed.
[ Impact: fix lockdep check_flags warning + self-turn-off ]
Acked-by: Peter Zijlsta <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* master.kernel.org:/home/rmk/linux-2.6-arm: (48 commits)
[ARM] S3C24XX: ADC: Check pending queue before freeing adc client
[ARM] S3C: Fix ADC driver sparse warning
[ARM] Osiris: Fix double initialisation in machine block
[ARM] Anubis: Fix sparse warnings for items that should be static
[ARM] JIVE: Fix sparse warnings about items which should be static
[ARM] S3C: Fix sparse warning from missing 's3c_device_hwmon'
[ARM] S3C24XX: Fix sparse error in gpiolib.c
[ARM] 5455/1: Fix IRQ noise from VIC code
[ARM] 5454/1: ep93xx_eth: fix sparse warnings
[ARM] remove .gitignore from include/asm-arm
Update MAINTAINERS
mxc defconfig updates
mx31ads: Mark as having full regulatoion constraints with 1133-EV1 board
mx31ads: Depend on all the WM8350 core dependencies for WM1133-EV1 board
Fix ifdef in plat-mxc/irc.c
MX1ADS: remove I2C ifdefs
qong: remove AIPS[12] mappings from machine-specific iotable
mx31ads: imoux pins should be passed in as unsigned int
MXC: remove orphan imx_init_uart() definition
mx31: pin definition for csi
...
calculate_numa_remap_pages() is called only by __init initmem_init()
further calculate_numa_remap_pages is calling:
__init find_e820_area() and __init reserve_early()
So calculate_numa_remap_pages() should be __init calculate_numa_remap_pages().
WARNING: arch/x86/built-in.o(.text+0x82ea3): Section mismatch in reference from the function calculate_numa_remap_pages() to the function .init.text:find_e820_area()
The function calculate_numa_remap_pages() references
the function __init find_e820_area().
This is often because calculate_numa_remap_pages lacks a __init
annotation or the annotation of find_e820_area is wrong.
WARNING: arch/x86/built-in.o(.text+0x82f5f): Section mismatch in reference from the function calculate_numa_remap_pages() to the function .init.text:reserve_early()
The function calculate_numa_remap_pages() references
the function __init reserve_early().
This is often because calculate_numa_remap_pages lacks a __init
annotation or the annotation of reserve_early is wrong.
[ Impact: save memory, address Section mismatch warning ]
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1239991281.3153.4.camel@ht.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It is common to use "make install" in restricted environments which
differ from the one which was actually used to build the kernel. In
such environments it is highly undesirable to trigger a rebuild of any
part of the system. Worse, the rebuild may be spurious, triggered by
differences in the environment.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <20090415234642.GA28531@uranus.ravnborg.org>
Fix an endcase in the UV initialization code for the "UV large system mode"
of apicids. If node zero contains no cpus, cpus on another node will be the
boot cpu. The percpu data that contains the extra apicid bits was not
being initialized early enough.
[ Impact: fix potential boot crash on cpu-less UV nodes ]
Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20090417142447.GA23759@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add support for nodes that have cpus but no memory.
The current code was failing to add these nodes
to the nodes_present_map.
v2: Fixes case caught by David Rientjes - missed support
for the x2apic SRAT table.
[ Impact: fix potential boot crash on memory-less UV nodes. ]
Reported-by: David Rientjes <rientjes@google.com>
Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20090417142242.GA23743@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This renames include/asm-h8300/timer.h into arch/h8300/include/asm: it
was left over just because that file had been created in the -mm tree
before the whole h8300 header subdirectory had been moved, and then got
merged in the old location afterwards.
(See commits e0b0f9e4ea: "h8300: update
timer handler - new files" and 758db3f211:
"[h8300] move include/asm-h8300 to arch/h8300/include/asm" for details).
This also removes a left-over .gitignore file in include/asm-arm that
became stale when the ARM header files were moved (which happened in
multiple commits, just see "git log -- include/asm-arm" for details).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://www.linux-m32r.org/git/takata/linux-2.6_dev:
m32r: move include/asm-m32r/* to arch/m32r/include/asm/
m32r: move include/asm-m32r headers to arch/m32r/include/asm
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: fix microcode driver newly spewing warnings
x86, PAT: Remove page granularity tracking for vm_insert_pfn maps
x86: disable X86_PTRACE_BTS for now
x86, documentation: kernel-parameters replace X86-32,X86-64 with X86
x86: pci-swiotlb.c swiotlb_dma_ops should be static
x86, PAT: Remove duplicate memtype reserve in devmem mmap
x86, PAT: Consolidate code in pat_x_mtrr_type() and reserve_memtype()
x86, PAT: Changing memtype to WC ensuring no WB alias
x86, PAT: Handle faults cleanly in set_memory_ APIs
x86, PAT: Change order of cpa and free in set_memory_wb
x86, CPA: Change idmap attribute before ioremap attribute setup
Check pending queue and remove the adc client being released.
Signed-off-by: Ramax Lo <ramaxlo@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The symbol 's3c_adc_try' in arch/arm/plat-s3c24xx/adc.c
does not need to be exported and thus should be static.
This fixes the following sparse warning:
adc.c:103:6: warning: symbol 's3c_adc_try' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The .init_machine entry in mach-osiris.c had the same entry
twice, so remove one definition to fix the following warning
from sparse:
mach-osiris.c:416:3: warning: Initializer entry defined twice
mach-osiris.c:418:3: also defined here
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Make 'anubis_ide_platdata' statis as it is not used outside
the file it is in, fixing the following sparse warning:
mach-anubis.c:246:27: warning: symbol 'anubis_ide_platdata' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Make 'jive_vgg2432a4_display' and 'jive_lcd_config' static as
they are not exported, and are generating the following sparse
warnings:
mach-jive.c:280:26: warning: symbol 'jive_vgg2432a4_display' was not declared. Should it be static?
mach-jive.c:313:28: warning: symbol 'jive_lcd_config' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Fix the following sparse warning due to s3c_device_hwmon being
missing from <plat/devs.h>
devs.c:380:24: warning: symbol 's3c_device_hwmon' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Fix the following sparse error generated by including
<plat/gpio-core.h> instead of <mach/gpio-core.h>
gpiolib.c:78:22: warning: symbol 's3c24xx_gpios' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
It causes crash on system with lots of cards with MSI-X
when irq_balancer enabled...
The patches fixing it were both complex and fragile, according
to Eric they were also doing quite dangerous things to the
hardware.
Instead we now have patches that solve this problem via static
NUMA node mappings - not dynamic allocation and balancing.
The patches are much simpler than this method but are still too
large outside of the merge window, so we mark the dynamic balancer
as broken for now, and queue up the new approach for v2.6.31.
[ Impact: deactivate broken kernel feature ]
Reported-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <49E68C41.4020801@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'x86/uv' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: UV BAU distribution and payload MMRs
x86: UV: BAU partition-relative distribution map
x86, uv: add Kconfig dependency on NUMA for UV systems
x86: prevent /sys/firmware/sgi_uv from being created on non-uv systems
x86, UV: Fix for nodes with memory and no cpus
x86, UV: system table in bios accessed after unmap
x86: UV BAU messaging timeouts
x86: UV BAU and nodes with no memory
Jeff Garzik reported this WARN_ON() noise:
> Kernel: 2.6.30-rc1-00306-g8371f87
> Hardware: ICH10 x86-64
>
> This is a regression from 2.6.29. Microcode spews the following WARNING
> multiple times during boot:
>
> ------------[ cut here ]------------
> WARNING: at fs/sysfs/group.c:138 sysfs_remove_group+0xeb/0xf0()
> Hardware name: sysfs group ffffffffa0209700 not found for
> kobject 'cpu0'
Keep sysfs files around for cpus even when we failed to locate
microcode for them at the moment of module loading. The appropriate
microcode firmware can become available later on.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This change resolves the problem of too many single page entries
in pat_memtype_list and "freeing invalid memtype" errors with i915,
reported here:
http://marc.info/?l=linux-kernel&m=123845244713183&w=2
Remove page level granularity track and untrack of vm_insert_pfn.
memtype tracking at page granularity does not scale and cleaner
approach would be for the driver to request a type for a bigger
IO address range or PCI io memory range for that device, either at
mmap time or driver init time and just use that type during
vm_insert_pfn.
This patch just removes the track/untrack of vm_insert_pfn. That
means we will be in same state as 2.6.28, with respect to these APIs.
Newer APIs for the drivers to request a memtype for a bigger region
is coming soon.
[ Impact: fix Xorg startup warnings and hangs ]
Reported-by: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com>
Tested-by: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
LKML-Reference: <20090408223716.GC3493@linux-os.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The VIC code will attempt to perform som
default set_irq_chip() and set_irq_chip_data()
on all IRQs supported by the VIC, while the new
IRQ handling code strictly checks for the global
NR_IRQS to be respected also for these IRQs.
This patch will respect the interrupt mask passed
to the VIC driver and will prevent it from
attempting to call these functions on any unused
interrupts.
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Having flush_tlb_mm->smp_flush_tlb_mm() send an IPI to every cpu
on the system is occasionally triggering spin_lock contention in
generic_smp_call_function_interrupt().
Follow x86 arch's lead and only sends IPIs to the cpus in mm->cpu_vm_mask.
Experiments with this change have shown significant improvement in this
contention issue.
Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
KVM will use smp_send_reschedule to force a cpu out of guest mode.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
This patch correctly sets BAU memory mapped registers to point
to the sending activation descriptor table and target payload table.
The "Broadcast Assist Unit" is used for TLB shootdown in UV.
The memory mapped registers that point to sending and receiving
memory structures contain node numbers.
In one case the __pa() function did not provide the node id of
memory on blade zero in configurations where that id is nonzero.
In another case, it was assumed that memory was allocated on
the local node. That assumption is not true in a configuration
in which the node has no memory.
Tested on the UV hardware simulator.
[ Impact: fix possible runtime crash due to incorrect TLB logic ]
Signed-off-by: Cliff Wickman <cpw@sgi.com>
LKML-Reference: <E1LuR5Z-0007An-B8@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
sparc: remove some pointless conditionals before kfree()
sbus: changed ioctls to unlocked
sparc: asm/atomic.h on 32bit should include asm/system.h for xchg
sparc64: Fix smp_callin() locking.
This patch removes several i.MX board specific defconfig files in favour
for a mx1_defconfig, mx27_defconfig and mx3_defconfig. All config files
have all currently available boards, i.MX specific drivers and the network
device drivers for the boards enabled.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Move ifdef under function brackets. This fixes compile crach when IRQ priorities
are disabled.
Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
AIPS[12] are no mapped from generic MX3 code so we don't need to
map them from machine-specific map_io function anymore.
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Set the correct clkdev-name for the i2c clock.
It also get's rid of the ARCH_NR_GPIOS define on the rationale
that isn't an ARCH-wide setting anyway. If a device has two
pca953x devices, the reserved number will be wrong.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Add an export of the two GPIO configuration calls
s3c_gpio_cfgpin and s3c_gpio_setpull to allow modules
to use them (such as ASoC drivers)
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Update the filesystem options in the s3c2410_defconfig,
such as building ext4, enable the automounter as modules
and update the network filesysyem choices.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
It seems that declarations of kmalloc/kfree are missed, explicitly
include it.
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Oleg Nesterov found a couple of races in the ptrace-bts code
and fixes are queued up for it but they did not get ready in time
for the merge window. We'll merge them in v2.6.31 - until then
mark the feature as CONFIG_BROKEN. There's no user-space yet
making use of this so it's not a big issue.
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Stop gcc from generating uninitialised variable warnings after BUG(). The
problem is that MN10300's implementation of BUG() invokes system call 15 which
doesn't return - but there's no way to tell the compiler that and also emit the
bug table element with the correct file and line data.
So instead, we make the do...while wrapper in _debug_bug_trap() an endless loop
from which there's no escape.
Also, while we're at it, (1) get rid of _debug_bug_trap() and just implement
directly as BUG(), and (2) make the implementation of BUG() contingent on
CONFIG_BUG=y.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wire up missing system calls preadv() and pwritev().
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Discard duplicate PFN_xxx() macros from arch code as they're now in the
general headers.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
[S390] boot cputime accounting
[S390] add read_persistent_clock
[S390] cpu hotplug and accounting values
[S390] fix idle time accounting
[S390] smp: fix cpu_possible_map initialization
[S390] dasd: fix idaw boundary checking for track based ccw
[S390] dasd: Use the new async framework for autoonlining.
[S390] qdio: remove dead timeout handler
[S390] appldata: Use new mod_virt_timer_periodic() function.
[S390] extend virtual timer interface by mod_virt_timer_periodic
[S390] stp synchronization retry timer
[S390] call nmi_enter/nmi_exit on machine checks
[S390] wire up preadv/pwritev system calls
[S390] s390: move machine flags to lowcore
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
powerpc: pseries/dtl.c should include asm/firmware.h
powerpc: Fix data-corrupting bug in __futex_atomic_op
powerpc/pseries: Set error_state to pci_channel_io_normal in eeh_report_reset()
powerpc: Allow 256kB pages with SHMEM
powerpc: Document new FSL I2C bindings and cleanup
powerpc/mm: Fix compile warning
powerpc/85xx: TQM8548: update defconfig
powerpc/85xx: TQM8548: use proper phy-handles for enet2 and enet3
powerpc/85xx: TQM85xx: correct address of LM75 I2C device nodes
powerpc: Add support for early tlbilx opcode
powerpc: Fix tlbilx opcode
It turns out that 'smp_call_function_many()' doesn't work at all like
'smp_call_function_single()', and my change to Andrew's patch to use it
rather than a loop over all CPU's acpi-cpufreq doesn't work.
My bad.
'smp_call_function_many()' has two "features" (aka "documented bugs"):
(a) it needs to be called with preemption disabled, because it uses
smp_processor_id() without guarding the CPU lookup with 'get_cpu()'
and 'put_cpu()' like the 'single' variant does.
(b) even if the current CPU is part of the CPU mask, it won't do the
call on that CPU.
Still, we're better off trying to use 'smp_call_function_many()' than
looping over CPU's, since it at least in theory allows us to use a
broadcast IPI and do it all in parallel. So let's just work around the
silly semantic bugs in that function.
Reported-and-tested-by: Ali Gholami Rudi <ali@rudi.ir>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add SD/MMC to the s3c2410_defconfig, building in the core
and adding the rest of the drivers as modules.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Update the machine configuration of s3c2410_defconfig to
add support for newer machines, and update the s3c24xx
specific options.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Update the list of modules being built for the network
core of the s3c2410_defconfig. This update adds such
items as TCP congestion, netfilter for IPv4 and IPv6.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Going forward gpio_request() will be a requirement for GPIO API users so
call it for the LCD power GPIOs. With present code the kernel functions
but generaets loud WARN_ON()s when using the unrequested GPIOs.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Remove some pointless conditionals before kfree().
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix trivial build warning due to incompatible pointer type.
ep93xx_timer_interrupt() has the wrong return type causing a
warning during the build.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
When unmapping N pages (e.g. shared memory) the amount of TLB flushes
done can be (N*PAGE_SIZE/ZAP_BLOCK_SIZE)*N although it should be N at
maximum. With PREEMPT kernel ZAP_BLOCK_SIZE is 8 pages, so there is a
noticeable performance penalty when unmapping a large VMA and the system
is spending its time in flush_tlb_range().
The problem is that tlb_end_vma() is always flushing the full VMA
range. The subrange that needs to be flushed can be calculated by
tlb_remove_tlb_entry(). This approach was suggested by Hugh Dickins,
and is also used by other arches.
The speed increase is roughly 3x for 8M mappings and for larger mappings
even more.
Signed-off-by: Aaro Koskinen <Aaro.Koskinen@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
A randconfig build on powerpc failed with:
dtl.c: In function 'dtl_init':
dtl.c:238: error: implicit declaration of function 'firmware_has_feature'
dtl.c:238: error: 'FW_FEATURE_SPLPAR' undeclared (first use in this function)
- We need firmware.h for these definitions.
Signed-off-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Richard Henderson pointed out that the powerpc __futex_atomic_op has a
bug: it will write the wrong value if the stwcx. fails and it has to
retry the lwarx/stwcx. loop, since 'oparg' will have been overwritten
by the result from the first time around the loop. This happens
because it uses the same register for 'oparg' (an input) as it uses
for the result.
This fixes it by using separate registers for 'oparg' and 'ret'.
Cc: stable@kernel.org
Signed-off-by: Paul Mackerras <paulus@samba.org>
While adding native EEH support to Emulex and Qlogic drivers, it was
discovered that dev->error_state was set to pci_io_channel_normal too
late in the recovery process. These drivers rely on error_state to
determine if they can access the device in their slot_reset callback,
thus error_state needs to be set to pci_io_channel_normal in
eeh_report_reset(). Below is a detailed explanation (courtesy of Richard
Lary) as to why this is necessary.
Background:
PCI MMIO or DMA accesses to a frozen slot generate additional EEH
errors. If the number of additional EEH errors exceeds EEH_MAX_FAILS the
adapter will be shutdown. To avoid triggering excessive EEH errors and
an undesirable adapter shutdown, some drivers use the
pci_channel_offline(dev) wrapper function to return a Boolean value
based on the value of pci_dev->error_state to determine if PCI MMIO or
DMA accesses are safe. If the wrapper returns TRUE, drivers must not
make PCI MMIO or DMA access to their hardware.
The pci_dev structure member error_state reflects one of three values,
1) pci_channel_io_normal, 2) pci_channel_io_frozen, 3)
pci_channel_io_perm_failure. Function pci_channel_offline(dev) returns
TRUE if error_state is pci_channel_io_frozen or pci_channel_io_perm_failure.
The EEH driver sets pci_dev->error_state to pci_channel_io_frozen at the
point where the PCI slot is frozen. Currently, the EEH driver restores
dev->error_state to pci_channel_io_normal in eeh_report_resume() before
calling the driver's resume callback. However, when the EEH driver calls
the driver's slot_reset callback() from eeh_report_reset(), it
incorrectly indicates the error state is still pci_channel_io_frozen.
Waiting until eeh_report_resume() to restore dev->error_state to
pci_channel_io_normal is too late for Emulex and QLogic FC drivers and
any other drivers which are designed to use common code paths in these
two cases: i) those called after the driver's slot_reset callback() and
ii) those called after the PCI slot is frozen but before the driver's
slot_reset callback is called. Case i) all driver paths executed to
reinitialize the hardware after a reset and case ii) all code paths
executed by driver kernel threads that run asynchronous to the main
driver thread, such as interrupt handlers and worker threads to process
driver work queues.
Emulex and QLogic FC drivers are designed with common code paths which
require that pci_channel_offline(dev) reflect the true state of the
hardware. The state transitions that the hardware takes from Normal
Operations to Slot Frozen to Reset to Normal Operations are documented
in the Power Architecture™ Platform Requirements+ (PAPR+) in Table 75.
PE State Control.
PAPR defines the following 3 states:
0 -- Not reset, Not EEH stopped, MMIO load/store allowed, DMA allowed
(Normal Operations)
1 -- Reset, Not EEH stopped, MMIO load/store disabled, DMA disabled
2 -- Not reset, EEH stopped, MMIO load/store disabled, DMA disabled
(Slot Frozen)
An EEH error places the slot in state 2 (Frozen) and the adapter driver
is notified that an EEH error was detected. If the adapter driver
returns PCI_ERS_RESULT_NEED_RESET, the EEH driver calls
eeh_reset_device() to place the slot into state 1 (Reset) and
eeh_reset_device completes by placing the slot into State 0 (Normal
Operations). Upon return from eeh_reset_device(), the EEH driver calls
eeh_report_reset, which then calls the adapter's slot_reset callback. At
the time the adapter's slot_reset callback is called, the true state of
the hardware is Normal Operations and should be accurately reflected by
setting dev->error_state to pci_channel_io_normal.
The current implementation of EEH driver does not do so and requires
this change to correct this deficiency.
Signed-off-by: Mike Mason <mmlnx@us.ibm.com>
Acked-by: Linas Vepstas <linasvepstas@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Now that shmem's divisions by zero and SHMEM_MAX_BYTES are fixed,
let powerpc 256kB pages coexist with CONFIG_SHMEM again.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
MioA701 board's GPIO95 is the AC97 line. The other GPIO113
is not connected to the sound chip, but to the GSM chip as a
wakeup line.
It happens that when the pxa2xx_ac97 driver reconfigures the
gpio as an "out gpio" for AC97 reset (bug workaround), it
hangs the GSM chip.
As AC97 platform data now enables to specify the AC97 reset
line, use it.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Currently there are two possible platform datas for the PXA AC97 driver:
one supported by the generic AC97 driver only which provides callbacks
to allow board-specific configuration at stream startup and teardown,
and another for pxa2xx-ac97-lib which allows configuration of the reset
GPIO for PXA2xx CPUs.
Obviously this won't actually work when using the generic AC97 driver
since the drivers will attempt to parse the platform data in both
formats. Fix this by merging the two structures.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Interrupts must be disabled when taking the IPI lock.
Caught by lockdep.
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>
Revert part of af5c820a31 ("x86: cpumask:
use work_on_cpu in arch/x86/kernel/microcode_core.c")
That change is causing only one Intel CPU's microcode to be updated e.g.
microcode: CPU3 updated from revision 0x9 to 0x17, date = 2005-04-22
where before it announced that also for CPU0 and CPU1 and CPU2.
We cannot use work_on_cpu() in the CONFIG_MICROCODE_OLD_INTERFACE code,
because Intel's request_microcode_user() involves a copy_from_user() from
/sbin/microcode_ctl, which therefore needs to be on that CPU at the time.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
sh: Add in PCI bus for DMA API debugging.
sh: Pre-allocate a reasonable number of DMA debug entries.
sh: sh7786: modify usb setup timeout judgment bug.
MAINTAINERS: Update sh architecture file patterns.
sh: ap325: use edge control for ov772x camera
sh: Plug in support for ARCH=sh64 using sh SRCARCH.
sh: urquell: Fix up address mapping in board comments.
sh: Add support for DMA API debugging.
sh: Provide cpumask_of_pcibus() to fix NUMA build.
sh: urquell: Add board comment
sh: wire up sys_preadv/sys_pwritev() syscalls.
sh: sh7785lcr: fix PCI address map for 32-bit mode
sh: intc: Added resume from hibernation support to the intc
This patch enables each partition's BAU distribution bit map
to be partition-relative.
The distribution bitmap had been constructed assuming 0 as the base
node number. That construct would not have allowed a total system of
greater than 256 nodes.
It also corrects an error that occurred when the first blade's nasid
was not zero. That nasid was stored as the base node.
The base node number gets added by hardware to the node numbers implied
in the distribution bitmap, resulting in invalid target nasids.
Tested on the UV hardware simulator.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
LKML-Reference: <E1Ltl0C-0004Ob-37@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In commit 51dcdfec6a ("parport: Use the
PCI IRQ if offered") parport_pc_probe_port() gained an irqflags arg.
This isn't being supplied on powerpc. This patch make powerpc fallback
to the old behaviour, that is using "0" for irqflags.
Fixes build failure:
In file included from drivers/parport/parport_pc.c:68:
arch/powerpc/include/asm/parport.h: In function 'parport_pc_find_nonpci_ports':
arch/powerpc/include/asm/parport.h:32: error: too few arguments to function 'parport_pc_probe_port'
arch/powerpc/include/asm/parport.h:32: error: too few arguments to function 'parport_pc_probe_port'
arch/powerpc/include/asm/parport.h:32: error: too few arguments to function 'parport_pc_probe_port'
make[3]: *** [drivers/parport/parport_pc.o] Error 1
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After commit a7bb3909b3 ("spi: pxa2xx_spi:
introduce chipselect GPIO to simplify the common cases") the .gpio_cs
field in pxa2xx_spi_chip has to be set explicitly.
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Start the cpu time accounting very early to catch the cpu time spent
for the initial kernel setup. To make the output of /proc/uptime
match the sum of all cpu accounting values of the boot cpu reset
xtime and wall_to_monotonic to sane values based on the TOD clock.
The values set by timekeeping_init are off by up to a second.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add a read_persistent_clock function that does not just return 0.
Since timekeeping_init calls the function before time_init has been
called move reset_tod_clock to early.c to make sure that the TOD
clock is running when read_persistent_clock is invoked.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reset the cpu timer to the maximum value and correctly initialize the
cpu accounting values in the lowcore when the cpu is started.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The steal time is calculated by subtracting the time the virtual cpu
has been running on a physical cpu from the wall clock time. To make
that work all wall time needs to be added to the steal time field first
before the virtual cpu time is subtracted.
The time between the last clock update and the load of the enabled wait
psw needs to be added to the steal_time field as well to make the sum
over all cpu accounting numbers match the wall clock.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The cpu_possible_map by default is initialized with all ones in s390.
If the kernel paramert possible_cpus=<x> is passed the cpu_possible_map
is supposed to have x bits set.
However the current code just sets the x bits without clearing the NR_CPUS
bits that were already set. So we end up with an unchanged map that has
all bits set.
To fix this just clear the map before setting any new bits.
This broke with def6cfb70b
"[S390] cpumask: Use accessors code."
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
mod_virt_timer() was used to modify/add cpu timers for cpus that were
set online. This resulted in a one-shot timer for every cpu that was
newly added or previously set offline, instead of an interval timer,
which broke the appldata vtime interval setup.
To fix this, the new mod_virt_timer_periodic() function is used, which
adds interval timers instead of one-shot timers.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
In case mod_virt_timer is used to add a non pending timer the timer
is always added as a one-shot timer. If mod_virt_timer is used for
periodic timers they may therfore be degraded to one-shot timers.
Add mod_virt_timer_periodic to the interface to allow safe re-programming
of the interval value.
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add a timer that retries the clock synchronization via the server time
protocol if there is a usable clock but the synchronization failed.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
nmi_enter/nmi_exit includes the lockdep calls and various
other calls which were missing so far.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Currently the storage of the machine flags is a globally exported unsigned
long long variable. By moving the storage location into the lowcore struct we
allow assembler code to check machine_flags directly even without needing a
register. Addtionally the lowcore and therefore the machine flags too will be
in cache most of the time.
Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
As discussed in the thread here:
http://marc.info/?l=linux-kernel&m=123964468521142&w=2
Eric W. Biederman observed:
> It looks like some additional bugs have slipped in since last I looked.
>
> set_irq_affinity does this:
> ifdef CONFIG_GENERIC_PENDING_IRQ
> if (desc->status & IRQ_MOVE_PCNTXT || desc->status & IRQ_DISABLED) {
> cpumask_copy(desc->affinity, cpumask);
> desc->chip->set_affinity(irq, cpumask);
> } else {
> desc->status |= IRQ_MOVE_PENDING;
> cpumask_copy(desc->pending_mask, cpumask);
> }
> #else
>
> That IRQ_DISABLED case is a software state and as such it has nothing to
> do with how safe it is to move an irq in process context.
[...]
>
> The only reason we migrate MSIs in interrupt context today is that there
> wasn't infrastructure for support migration both in interrupt context
> and outside of it.
Yes. The idea here was to force the MSI migration to happen in process
context. One of the patches in the series did
disable_irq(dev->irq);
irq_set_affinity(dev->irq, cpumask_of(dev->cpu));
enable_irq(dev->irq);
with the above patch adding irq/manage code check for interrupt disabled
and moving the interrupt in process context.
IIRC, there was no IRQ_MOVE_PCNTXT when we were developing this HPET
code and we ended up having this ugly hack. IRQ_MOVE_PCNTXT was there
when we eventually submitted the patch upstream. But, looks like I did a
blind rebasing instead of using IRQ_MOVE_PCNTXT in hpet MSI code.
Below patch fixes this. i.e., revert commit 932775a4ab
and add PCNTXT to HPET MSI setup. Also removes copying of desc->affinity
in generic code as set_affinity routines are doing it internally.
Reported-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Li Shaohua" <shaohua.li@intel.com>
Cc: Gary Hade <garyhade@us.ibm.com>
Cc: "lcm@us.ibm.com" <lcm@us.ibm.com>
Cc: suresh.b.siddha@intel.com
LKML-Reference: <20090413222058.GB8211@linux-os.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This changes was introduce with
commit: cb9eff0978
net: new user space API for time stamping of incoming and outgoing packets
Signed-off-by: Michal Simek <monstr@monstr.eu>
Adding one new line was recommended solution.
Test with make distclean
Tested-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
