Kernel panic is observed during SSR. This is because
ADSP does not get sufficient time to bring up LPASS after SSR.
An increase in ADSP Ready timeout resolves the issue.
CRs-Fixed: 2101404
Change-Id: Ia7d1ecde7a713b4d71b2a4ebb1f85a38b8fa28b5
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Add a new mixer ctl to set WSA boost value for
speaker protection v3. Boost value for different
stages are packed together.
Change-Id: Ie80d7bea4d3af00b74935f8b680e72ee967717f6
Signed-off-by: Xiaojun Sang <xsang@codeaurora.org>
Add new mixer ctls to control max boost state level
for speaker protection V3.
Change-Id: If967de46955f6dc8692986503daea68ce105f642
Signed-off-by: Xiaojun Sang <xsang@codeaurora.org>
Update quinary mi2s dai id to 4 and secondary mi2s playback
sd1 dai id to 5. Also update index of mi2s_config_controls
for primary, secondary, tertiary and quaternary mi2s.
CRs-Fixed: 2133890
Change-Id: I00997b79a148cf50b2a3f9acf6e44fe603e5c944
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Update quinary mi2s cpu dai id to 4 for sdm670. This is
required for sending correct afe port id for quin mi2s
and keep all MI2S interfaces in sequence.
CRs-Fixed: 2133890
Change-Id: I0ab35f2d97858f355da577076a5a1e3f438a1bab
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Switch to DLKM for all audio kernel modules.
Change-Id: I6a96023a21f655f873531af9ace81f2b01eb0f58
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Compander disable sequence does not get called
after headphone playback on FM. This results
in mute at one channel. Compander clock
should be disabled at the end to resolve the mute.
CRs-Fixed: 2102126
Change-Id: Ia47fb1c393db255b52a965173a769896768f245e
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Check if GPIO is valid before free to avoid crash.
Change-Id: Ie052e5ff1776ad57ae9c1d0f00873ba29e11f78f
Signed-off-by: Meng Wang <mwang@codeaurora.org>
Deregister sound card with audio notifier when removing driver to
avoid crash.
Change-Id: I4f22fefce519e8dab25901337fdf2e62044090ed
Signed-off-by: Meng Wang <mwang@codeaurora.org>
Remove any child devices associated with this
codec driver so that rmmod and insmod again will
run without issues.
Clear MBHC setting during tasha_remove.
Change-Id: Icad9b2ad21601525c68c5d151cd664aa6060e911
Signed-off-by: Meng Wang <mwang@codeaurora.org>
When CONFIG_SND_SOC_EXT_CODEC/CONFIG_SND_SOC_INT_CODEC is set to m not y,
"ifdef CONFIG_SND_SOC_EXT_CODEC/CONFIG_SND_SOC_INT_CODEC"
would be false which would cause init functions as dummy functions.
Change to "if IS_ENABLED" and When CONFIG_SND_SOC_EXT_CODEC/
CONFIG_SND_SOC_INT_CODEC is set to y/m, both would set the
condition to true.
Change Makefile to compile machine driver for internal/external
codec as one module.
Change-Id: Ib72f95a24e8a4e657a1e9efc655f92a397b44d32
Signed-off-by: Meng Wang <mwang@codeaurora.org>
Enable all five TDM interfaces to configure clock frequency during
the runtime.
Change-Id: I066ea2034509dee2350205ee887dd3eeb6f5389b
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Update cpu_dai_name of quin_tdm from tdm group id to
port id for sdm670 internal and external codec machine
driver to fix soundcard registration issue.
Change-Id: I2f7ed4ea983c1d457c4d2940c33f5bb7440ddee6
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Add support for HDMI and DP for S24_3LE bit format.
This allows playback of 24bit audio on the external
device.
Change-Id: Ia6e1148b2e5d13cc0ff6f2372d61c83c3e704255
Signed-off-by: Ben Romberger <bromberg@codeaurora.org>
Pop noise occurs during switch from handset to speaker mode
during voice call. This is because sufficient delay
is not provided for tx to unmute. A delayed workqueue
that will do unmute at the end solves the issue.
CRs-Fixed: 2101423
Change-Id: I1ae7068b23158bb8428d5b96e9f65fb05a67ff7e
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Add support to configure MI2S gpios from machine
driver.
Change-Id: I561fdc775c63fd7b31d41a3053956d1643bea566
Signed-off-by: Rohit Kumar <rohitkr@codeaurora.org>
Add sclk and mclk support for quinary MI2S interfaces for
sdm660. Also, update MCLK IDs for secondary and quaternary
MI2S.
Change-Id: If6271224caffbf1623939d409e3e031d5a0c8423
Signed-off-by: Rohit Kumar <rohitkr@codeaurora.org>
Separate compilation of analog and digital codec and add
support to compile them as dynamic module.
Change-Id: I81f01bf60aef71f67e025fa4ff1ba805a960e61d
Signed-off-by: Rohit Kumar <rohitkr@codeaurora.org>
Change name from "TERTIARY_MI2S" to "TERT_MI2S" for RX and TX
in order to maintain consistency with other Mi2S back-ends.
CRs-Fixed: 2075701
Change-Id: I52116df27a780e42de4a6b3d74249f77d311d8d4
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
when moisture is in jack, removing of the plug result in
electrical removal interrupt. So, update electrical interrupt
handler to handle mechanical removal based on moisture status.
CRs-Fixed: 2058106
Change-Id: I9cfbfbaf04783f0edcadb14d7828759020745289
Signed-off-by: Meng Wang <mwang@codeaurora.org>
Add support for Quinary MI2S, AuxPCM and TDM interfaces
in sdm660 machine driver.
Change-Id: I2dad713a3286499e9b76206b28a82b56638949a4
Signed-off-by: Rohit Kumar <rohitkr@codeaurora.org>
Add support for dais and routing for Quinary MI2S, AUXPCM and TDM
interfaces.
Change-Id: I50c3099a658998bab805c4c6a5aa447e85f3e7c6
Signed-off-by: Rohit Kumar <rohitkr@codeaurora.org>