Commit graph

145701 commits

Author SHA1 Message Date
Jes Sorensen
43890ae8bc KVM: ia64: ia64 vcpu_reset() do not call kmalloc() with irqs disabled
Restore local irq enabled state before calling kvm_arch_vcpu_init(),
which calls kmalloc(GFP_KERNEL).

Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:44 +03:00
Jes Sorensen
4d13c3b04f KVM: ia64: preserve int status through call to kvm_insert_vmm_mapping
Preserve interrupt status around call to kvm_insert_vmm_mappin()
in kvm_vcpu_pre_transition().

Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:44 +03:00
Jes Sorensen
457459c3c7 KVM: ia64: restore irq state before calling kvm_vcpu_init
Make sure to restore the psr after calling kvm_insert_vmm_mapping()
which calls ia64_itr_entry() as it disables local interrupts and
kvm_vcpu_init() may sleep.

Avoids a warning from the lock debugging code.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by : Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:44 +03:00
Jes Sorensen
f9b647adda KVM: ia64: remove empty function vti_vcpu_load()
vti_vcpu_load() doesn't do anything, so lets get rid of it.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by : Xiantao Zhang<xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:44 +03:00
Xiantao Zhang
64f6afbd4c KVM: ia64: Flush all TLBs once guest's memory mapping changes.
Flush all vcpu's TLB entries once changes guest's memory mapping.

Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:43 +03:00
Marcelo Tosatti
59839dfff5 KVM: x86: check for cr3 validity in ioctl_set_sregs
Matt T. Yourst notes that kvm_arch_vcpu_ioctl_set_sregs lacks validity
checking for the new cr3 value:

"Userspace callers of KVM_SET_SREGS can pass a bogus value of cr3 to
the kernel. This will trigger a NULL pointer access in gfn_to_rmap()
when userspace next tries to call KVM_RUN on the affected VCPU and kvm
attempts to activate the new non-existent page table root.

This happens since kvm only validates that cr3 points to a valid guest
physical memory page when code *inside* the guest sets cr3. However, kvm
currently trusts the userspace caller (e.g. QEMU) on the host machine to
always supply a valid page table root, rather than properly validating
it along with the rest of the reloaded guest state."

http://sourceforge.net/tracker/?func=detail&atid=893831&aid=2687641&group_id=180599

Check for a valid cr3 address in kvm_arch_vcpu_ioctl_set_sregs, triple
fault in case of failure.

Cc: stable@kernel.org
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:43 +03:00
Jes Sorensen
c6b60c6921 KVM: ia64: Don't hold slots_lock in guest mode
Reorder locking to avoid holding the slots_lock when entering
the guest.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by : Xiantao Zhang<xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:43 +03:00
Avi Kivity
463656c000 KVM: Replace kvmclock open-coded get_cpu_var() with the real thing
Suggested by Ingo Molnar.

Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:42 +03:00
Gleb Natapov
8317c298ea KVM: SVM: Skip instruction on a task switch only when appropriate
If a task switch was initiated because off a task gate in IDT and IDT
was accessed because of an external even the instruction should not
be skipped.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:42 +03:00
Gleb Natapov
ba8afb6b0a KVM: x86 emulator: Add new mode of instruction emulation: skip
In the new mode instruction is decoded, but not executed. The EIP
is moved to point after the instruction.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:42 +03:00
Gleb Natapov
e637b8238a KVM: x86 emulator: Decode soft interrupt instructions
Do not emulate them yet.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:41 +03:00
Gleb Natapov
84ce66a686 KVM: x86 emulator: Completely decode in/out at decoding stage
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:41 +03:00
Gleb Natapov
341de7e372 KVM: x86 emulator: Add unsigned byte immediate decode
Extend "Source operand type" opcode description field to 4 bites
to accommodate new option.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:41 +03:00
Gleb Natapov
d53c4777b3 KVM: x86 emulator: Complete decoding of call near in decode stage
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:41 +03:00
Gleb Natapov
b2833e3cde KVM: x86 emulator: Complete short/near jcc decoding in decode stage
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:40 +03:00
Gleb Natapov
782b877c80 KVM: x86 emulator: Complete ljmp decoding at decode stage
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:40 +03:00
Gleb Natapov
0654169e73 KVM: x86 emulator: Add lcall decoding
No emulation yet.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:40 +03:00
Gleb Natapov
a5f868bd45 KVM: x86 emulator: Add decoding of 16bit second immediate argument
Such as segment number in lcall/ljmp

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:40 +03:00
Marcelo Tosatti
c2d0ee46e6 KVM: MMU: remove global page optimization logic
Complexity to fix it not worthwhile the gains, as discussed
in http://article.gmane.org/gmane.comp.emulators.kvm.devel/28649.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:39 +03:00
nathan binkert
2f8b9ee14e KVM: Make kvm header C++ friendly
Two things needed fixing: 1) g++ does not allow a named structure type
within an anonymous union and 2) Avoid name clash between two padding
fields within the same struct by giving them different names as is
done elsewhere in the header.

Signed-off-by: Nathan Binkert <nate@binkert.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:39 +03:00
Marcelo Tosatti
ede2ccc517 KVM: PIT: fix count read and mode 0 handling
Commit 46ee278652f4cbd51013471b64c7897ba9bcd1b1 causes Solaris 10
to hang on boot.

Assuming that PIT counter reads should return 0 for an expired timer
is wrong: when it is active, the counter never stops (see comment on
__kpit_elapsed).

Also arm a one shot timer for mode 0.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:39 +03:00
Zhang, Xiantao
2906e79f21 KVM: ia64: make kvm depend on CONFIG_MODULES.
Since kvm-intel modue can't be built-in, make kvm depend on
CONFIG_MODULES.

Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:38 +03:00
Gleb Natapov
2d03319654 KVM: x86 emulator: fix call near emulation
The length of pushed on to the stack return address depends on operand
size not address size.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:38 +03:00
Sheng Yang
4c26b4cd6f KVM: MMU: Discard reserved bits checking on PDE bit 7-8
1. It's related to a Linux kernel bug which fixed by Ingo on
07a66d7c53. The original code exists for quite a
long time, and it would convert a PDE for large page into a normal PDE. But it
fail to fit normal PDE well.  With the code before Ingo's fix, the kernel would
fall reserved bit checking with bit 8 - the remaining global bit of PTE. So the
kernel would receive a double-fault.

2. After discussion, we decide to discard PDE bit 7-8 reserved checking for now.
For this marked as reserved in SDM, but didn't checked by the processor in
fact...

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:38 +03:00
Gleb Natapov
64a7ec0668 KVM: Fix unneeded instruction skipping during task switching.
There is no need to skip instruction if the reason for a task switch
is a task gate in IDT and access to it is caused by an external even.
The problem  is currently solved only for VMX since there is no reliable
way to skip an instruction in SVM. We should emulate it instead.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:38 +03:00
Gleb Natapov
b237ac37a1 KVM: Fix task switch back link handling.
Back link is written to a wrong TSS now.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:37 +03:00
Gleb Natapov
8843419048 KVM: VMX: Do not zero idt_vectoring_info in vmx_complete_interrupts().
We will need it later in task_switch().
Code in handle_exception() is dead. is_external_interrupt(vect_info)
will always be false since idt_vectoring_info is zeroed in
vmx_complete_interrupts().

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:37 +03:00
Gleb Natapov
37b96e9880 KVM: VMX: Rewrite vmx_complete_interrupt()'s twisted maze of if() statements
...with a more straightforward switch().

Also fix a bug when NMI could be dropped on exit. Although this should
never happen in practice, since NMIs can only be injected, never triggered
internally by the guest like exceptions.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:37 +03:00
Gleb Natapov
7b4a25cb29 KVM: VMX: Fix handling of a fault during NMI unblocked due to IRET
Bit 12 is undefined in any of the following cases:
 If the VM exit sets the valid bit in the IDT-vectoring information field.
 If the VM exit is due to a double fault.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:36 +03:00
Dong, Eddie
20c466b561 KVM: Use rsvd_bits_mask in load_pdptrs()
Also remove bit 5-6 from rsvd_bits_mask per latest SDM.

Signed-off-by: Eddie Dong <Eddie.Dong@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:36 +03:00
Sheng Yang
93ba03c2e2 KVM: VMX: Fix feature testing
The testing of feature is too early now, before vmcs_config complete initialization.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:36 +03:00
Sheng Yang
045471563d KVM: VMX: Clean up Flex Priority related
And clean paranthes on returns.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:36 +03:00
Wei Yongjun
7a6ce84c74 KVM: remove pointless conditional before kfree() in lapic initialization
Remove pointless conditional before kfree().

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:35 +03:00
Avi Kivity
9645bb56b3 KVM: MMU: Use different shadows when EFER.NXE changes
A pte that is shadowed when the guest EFER.NXE=1 is not valid when
EFER.NXE=0; if bit 63 is set, the pte should cause a fault, and since the
shadow EFER always has NX enabled, this won't happen.

Fix by using a different shadow page table for different EFER.NXE bits.  This
allows vcpus to run correctly with different values of EFER.NXE, and for
transitions on this bit to be handled correctly without requiring a full
flush.

Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:35 +03:00
Dong, Eddie
82725b20e2 KVM: MMU: Emulate #PF error code of reserved bits violation
Detect, indicate, and propagate page faults where reserved bits are set.
Take care to handle the different paging modes, each of which has different
sets of reserved bits.

[avi: fix pte reserved bits for efer.nxe=0]

Signed-off-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:35 +03:00
Yang Zhang
362c1055e5 KVM: ia64: enable external interrupt in vmm
Currently, the interrupt enable bit is cleared when in
the vmm.  This patch sets the bit and the external interrupts can
be dealt with when in the vmm.  This improves the I/O performance.

Signed-off-by: Yang Zhang <yang.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:34 +03:00
Eddie Dong
a8b876b1a4 KVM: MMU: Fix comment in page_fault()
The original one is for the code before refactoring.

Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:34 +03:00
Sheng Yang
f9c617f611 KVM: VMX: Correct wrong vmcs field sizes
EXIT_QUALIFICATION and GUEST_LINEAR_ADDRESS are natural width, not 64-bit.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:34 +03:00
Avi Kivity
7d433b9f94 KVM: VMX: Make flexpriority module parameter reflect hardware capability
If the hardware does not support flexpriority, zero the module parameter.

Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:34 +03:00
Gleb Natapov
78646121e9 KVM: Fix interrupt unhalting a vcpu when it shouldn't
kvm_vcpu_block() unhalts vpu on an interrupt/timer without checking
if interrupt window is actually opened.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:33 +03:00
Gleb Natapov
09cec75488 KVM: Timer event should not unconditionally unhalt vcpu.
Currently timer events are processed before entering guest mode. Move it
to main vcpu event loop since timer events should be processed even while
vcpu is halted.  Timer may cause interrupt/nmi to be injected and only then
vcpu will be unhalted.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:33 +03:00
Avi Kivity
089d034e0c KVM: VMX: Fold vm_need_ept() into callers
Trivial.

Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:32 +03:00
Avi Kivity
575ff2dcb2 KVM: VMX: Zero ept module parameter if ept is not present
Allows reading back hardware capability.

Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:32 +03:00
Avi Kivity
919818abc2 KVM: VMX: Zero the vpid module parameter if vpid is not supported
This allows reading back how the hardware is configured.

Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:32 +03:00
Avi Kivity
4462d21a61 KVM: VMX: Annotate module parameters as __read_mostly
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:32 +03:00
Avi Kivity
736caefe15 KVM: VMX: Simplify module parameter names
Instead of 'enable_vpid=1', use a simple 'vpid=1'.

Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:31 +03:00
Avi Kivity
6062d012ed KVM: VMX: Rename kvm_handle_exit() to vmx_handle_exit()
It is a static vmx-specific function.

Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:31 +03:00
Avi Kivity
c1f8bc04c6 KVM: VMX: Make module parameters readable
Useful to see how the module was loaded.

Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:31 +03:00
Gleb Natapov
fe4c7b1914 KVM: reuse (pop|push)_irq from svm.c in vmx.c
The prioritized bit vector manipulation functions are useful in both vmx and
svm.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:31 +03:00
Gleb Natapov
61c50edfcd KVM: SVM: Remove duplicate code in svm_do_inject_vector()
svm_do_inject_vector() reimplements pop_irq().

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:30 +03:00