There should be no need to invalidate a perfectly good state owner just
because of a stale filehandle. Doing so can cause the state recovery code
to break, since nfs4_get_renew_cred() and nfs4_get_setclientid_cred() rely
on finding active state owners.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In the case of readpage() we need to ensure that the pages get unlocked,
and that the error is flagged.
In the case of O_DIRECT, we need to ensure that the pages are all released.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
It is possible for nfs_wb_page() to sometimes exit with 0 return value, yet
the page is left in a dirty state.
For instance in the case where the server rebooted, and the COMMIT request
failed, then all the previously "clean" pages which were cached by the
server, but were not guaranteed to have been writted out to disk,
have to be redirtied and resent to the server.
The fix is to have nfs_wb_page_priority() check that the page is clean
before it exits...
This fixes a condition that triggers the BUG_ON(PagePrivate(page)) in
nfs_create_request() when we're in the nfs_readpage() path.
Also eliminate a redundant BUG_ON(!PageLocked(page)) while we're at it. It
turns out that clear_page_dirty_for_io() has the exact same test.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: refactor the encoding of the opaque 16-byte private argument in
xdr_encode_mon(). This will be updated later to support IPv6 addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Switch to using the new mon_id encoder function.
Now that we've refactored the encoding of SM_MON requests, we've
discovered that the pre-computed buffer length maximums are
incorrect!
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: document the argument type that xdr_encode_common() is
marshalling by introducing a new function. The new function will replace
xdr_encode_common() in just a sec.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: introduce a new XDR encoder specifically for the my_id
argument of SM_MON requests.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: introduce a new XDR encoder specifically for the mon_name
argument of SM_MON requests. This will be updated later to support IPv6
addresses in addition to IPv4 addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Introduce a special helper function to check the length of NSM strings
before they are placed on the wire.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: RPC protocol version numbers are u32. Make sure we use an
appropriate type for NLM version numbers when calling nlm_lookup_host().
Eliminates a harmless mixed sign comparison in nlm_host_lookup().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Bruce Fields says:
"By the way, we've got another config-related nit here:
http://bugzilla.linux-nfs.org/show_bug.cgi?id=156
You can build lockd without CONFIG_SYSCTL set, but then the module will
fail to load."
For now, disable the sysctl registration calls in lockd if CONFIG_SYSCTL
is not enabled. This allows the kernel to build properly if PROC_FS or
SYSCTL is not enabled, but an NFS client is desired.
In the long run, we would like to be able to build the kernel with an
NFS client but without lockd. This makes sense, for example, if you want
an NFSv4-only NFS client, as NFSv4 doesn't use NLM at all.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Most distros will want support for rpcbind protocols 3 and 4 to default off
until they have integrated user-space support for the new rpcbind daemon
which supports IPv6 RPC services.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: refresh the help text for Kconfig items related to the sunrpc
module. Remove obsolete URLs, and make the language consistent among
the options.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Since O_DIRECT is a standard feature that is enabled in most distros,
eliminate the CONFIG_NFS_DIRECTIO build option, and change the
fs/nfs/Makefile to always build in the NFS direct I/O engine.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Display all mount options in /proc/mount which may be needed to reconstruct
a previous mount.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Save the value of the mountproto= mountport= mountvers= and mountaddr=
options so that these values can be displayed later via
nfs_show_options().
This preserves the intent of the original mount options, should the file
system need to be remounted based on what's displayed in /proc/mounts.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
During a remount based on the mount options displayed in /proc/mounts, we
want to preserve the original behavior of the mount request. Let's save
the original setting of the "port=" mount option in the mount's nfs_server
structure.
This allows us to simplify the default behavior of port setting for NFSv4
mounts: by default, NFSv2/3 mounts first try an RPC bind to determine the
NFS server's port, unless the user specified the "port=" mount option;
Users can force the client to skip the RPC bind by explicitly specifying
"port=<value>".
NFSv4, by contrast, assumes the NFS server port is 2049 and skips the RPC
bind, unless the user specifies "port=". Users can force an RPC bind for
NFSv4 by explicitly specifying "port=0".
I added a couple of extra comments to clarify this behavior.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: make data types of fields in nfs_parsed_mount_options more
consistent with other uses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: use %u instead of %d when displaying NFS mount options.
Nit: Fix reporting of "namlen=" option in nfs_show_mount_stats. The mount
option is called "namlen" without the "e".
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, the NFS readdir decoders have a workaround for buggy servers
that send an empty readdir response with the EOF bit unset. If the
server sends a malformed response in some cases, this workaround kicks
in and just returns an empty response rather than returning a proper
error to the caller.
This patch does 3 things:
1) have malformed responses with no entries return error (-EIO)
2) preserve existing workaround for servers that send empty
responses with the EOF marker unset.
3) Add some comments to clarify the logic in decode_readdir().
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, the NFS readdir decoders have a workaround for buggy servers
that send an empty readdir response with the EOF bit unset. If the
server sends a malformed response in some cases, this workaround kicks
in and just returns an empty response rather than returning a proper
error to the caller.
This patch does 3 things:
1) have malformed responses with no entries return error (-EIO)
2) preserve existing workaround for servers that send empty
responses with the EOF marker unset.
3) Add some comments to clarify the logic in nfs3_xdr_readdirres().
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, the NFS readdir decoders have a workaround for buggy servers
that send an empty readdir response with the EOF bit unset. If the
server sends a malformed response in some cases, this workaround kicks
in and just returns an empty response rather than returning a proper
error to the caller.
This patch does 3 things:
1) have malformed responses with no entries return error (-EIO)
2) preserve existing workaround for servers that send empty
responses with the EOF marker unset.
3) Add some comments to clarify the logic in nfs_xdr_readdirres().
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Both flush functions have the same error handling routine. Pull
it out as a function.
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ignoring the return value from nfs_pageio_add_request can cause deadlocks.
In read path:
call nfs_pageio_add_request from readpage_async_filler
assume at this point that there are requests already in desc, that
can't be merged with the current request.
so nfs_pageio_doio is fired up to clear out desc.
assume something goes wrong in setting up the io, so desc->pg_error is set.
This causes nfs_pageio_add_request to return 0, *WITHOUT* adding the original
request.
BUT, since return code is ignored, readpage_async_filler assumes it has
been added, and does nothing further, leaving page locked.
do_generic_mapping_read will eventually call lock_page, resulting in deadlock
In write path:
page is marked dirty by generic_perform_write
nfs_writepages is called
call nfs_pageio_add_request from nfs_page_async_flush
assume at this point that there are requests already in desc, that
can't be merged with the current request.
so nfs_pageio_doio is fired up to clear out desc.
assume something goes wrong in setting up the io, so desc->pg_error is set.
This causes nfs_page_async_flush to return 0, *WITHOUT* adding the original
request, yet marking the request as locked (PG_BUSY) and in writeback,
clearing dirty marks.
The next time a write is done to the page, deadlock will result as
nfs_write_end calls nfs_update_request
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
Revert "unexport bio_{,un}map_user"
relay: fix subbuf_splice_actor() adding too many pages
The ps2esdi driver was marked as BROKEN more than two years ago due to being
Outside users like asmlib uses the mapping functions. API wise, the
export is definitely sane. It's a better idea to keep this export
than to require external users to open-code this piece of code instead.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
oops and fs corruption; the latter can happen even on valid fs in case of oom.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This bug was always here, but before my commit 6fa02839bf
("recheck for secure ports in fh_verify"), it could only be triggered by
failure of a kmalloc(). After that commit it could be triggered by a
client making a request from a non-reserved port for access to an export
marked "secure". (Exports are "secure" by default.)
The result is a struct svc_export with a reference count one too low,
resulting in likely oopses next time the export is accessed.
The reference counting here is not straightforward; a later patch will
clean up fh_verify().
Thanks to Lukas Hejtmanek for the bug report and followup.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Lukas Hejtmanek <xhejtman@ics.muni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The previous value was not taking into account space for bitmap array size.
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The NFSv4 protocol allows clients to negotiate security protocols on the
fly in the case where an administrator on the server changes the export
settings and/or in the case where we may have a filesystem migration event.
Instead of having the NFS client code cache credentials that are tied to a
particular AUTH method it is therefore preferable to have a generic credential
that can be converted into whatever AUTH is in use by the RPC client when
the read/write/sillyrename/... is put on the wire.
We do this by means of the new "generic" credential, which basically just
caches the minimal information that is needed to look up an RPCSEC_GSS,
AUTH_SYS, or AUTH_NULL credential.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits)
[SCTP]: Fix local_addr deletions during list traversals.
net: fix build with CONFIG_NET=n
[TCP]: Prevent sending past receiver window with TSO (at last skb)
rt2x00: Add new D-Link USB ID
rt2x00: never disable multicast because it disables broadcast too
libertas: fix the 'compare command with itself' properly
drivers/net/Kconfig: fix whitespace for GELIC_WIRELESS entry
[NETFILTER]: nf_queue: don't return error when unregistering a non-existant handler
[NETFILTER]: nfnetlink_queue: fix EPERM when binding/unbinding and instance 0 exists
[NETFILTER]: nfnetlink_log: fix EPERM when binding/unbinding and instance 0 exists
[NETFILTER]: nf_conntrack: replace horrible hack with ksize()
[NETFILTER]: nf_conntrack: add \n to "expectation table full" message
[NETFILTER]: xt_time: fix failure to match on Sundays
[NETFILTER]: nfnetlink_log: fix computation of netlink skb size
[NETFILTER]: nfnetlink_queue: fix computation of allocated size for netlink skb.
[NETFILTER]: nfnetlink: fix ifdef in nfnetlink_compat.h
[NET]: include <linux/types.h> into linux/ethtool.h for __u* typedef
[NET]: Make /proc/net a symlink on /proc/self/net (v3)
RxRPC: fix rxrpc_recvmsg()'s returning of msg_name
net/enc28j60: oops fix
...
fs/built-in.o:(.rodata+0x1134): undefined reference to `proc_net_inode_operations'
fs/built-in.o:(.rodata+0x1138): undefined reference to `proc_net_operations'
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In some situations, ocfs2_set_nn_state might get called with sc = NULL and
valid = 0. If sc = NULL, we can't dereference it to get the o2nm_node
member. Instead, do what o2net_initialize_handshake does and use NULL when
calling o2net_reconnect_delay and o2net_idle_timeout.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
This patch addresses the bug in which the dlm_thread could go to sleep
while holding the dlm_spinlock.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Knowing the dlm recovery master helps in debugging recovery
issues. This patch prints a message on the recovery master node.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
dlm_master_request_handler() forgot to put a lockres when
dlm_assert_master_worker() failed or was skipped.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
During migration, the recovery master node may be asked to master a lockres
it may not know about. In that case, it would not only have to create a
lockres and add it to the hash, but also remember to to do the _put_
corresponding to the kref_init in dlm_init_lockres(), as soon as the migration
is completed. Yes, we don't wait for the dlm_purge_lockres() to do that
matching put. Note the ref added for it being in the hash protects the lockres
from being freed prematurely.
This patch adds that missing put, as described above, to plug a memleak.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Normally locks for remote nodes are freed when that node sends an UNLOCK
message to the master. The master node tags an DLM_UNLOCK_FREE_LOCK action
to do an extra put on the lock at the end.
However, there are times when the master node has to free the locks for the
remote nodes forcibly.
Two cases when this happens are:
1. When the master has migrated the lockres plus all locks to another node.
2. When the master is clearing all the locks of a dead node.
It was in the above two conditions that the dlm was missing the extra put.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
In ocfs2_group_add, 'cr' is a disk field of type 'ocfs2_chain_rec', and we
were putting cpu byteorder values into it. Swap things to the right endian
before storing.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
struct dlm_query_join_packet is made up of four one-byte fields. They
are effectively in big-endian order already. However, little-endian
machines swap them before putting the packet on the wire (because
query_join's response is a status, and that status is treated as a u32
on the wire). Thus, a big-endian and little-endian machines will
treat this structure differently.
The solution is to have little-endian machines swap the structure when
converting from the structure to the u32 representation.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
__dlm_print_one_lock_resource must be called with spin_lock
the res->spinlock. While in some cases, we use it without this
precondition and lead to the failure of assert_spin_locked.
So call dlm_print_one_lock_resource instead.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
fs/ocfs2/dlm/dlmdomain.c: In function 'dlm_send_join_cancels':
fs/ocfs2/dlm/dlmdomain.c:983: warning: format '%u' expects type 'unsigned int', but argument 7 has type 'long unsigned int'
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
