Commit graph

76 commits

Author SHA1 Message Date
Ishai Rabinovitz
b7ac4ab497 IB/srp: Handle DREQ events from CM
Handle IB_CM_DREQ_ERROR and IB_CM_DREQ_RECEIVED events from the CM,
instead of just printing "Unhandled CM event".  In the case of
DREQ_ERROR, just ignore the event -- a TIMEWAIT_EXIT will be generated
also.  For DREQ_RECEIVED, send a DREP in response to shut the
connection down cleanly.

Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:32 -07:00
Vu Pham
74b0a15b5e IB/srp: Allow sg_tablesize to be adjusted
Make the sg_tablesize used by SRP adjustable at module load time via a
module parameter.  Calculate the corresponding IU length required to
support this.

Signed-off-by: Vu Pham <vu@mellanox.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:32 -07:00
Vu Pham
52fb2b50c4 IB/srp: Allow cmd_per_lun to be set per target port
Allow userspace to throttle traffic on a given connection to a target
port by adding "max_cmd_per_lun=xyz" to lower the cmd_per_lun value
set for that scsi_host.

Signed-off-by: Vu Pham <vu@mellanox.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:31 -07:00
Ishai Rabinovitz
0c5b395239 IB/srp: Clean up loop in srp_remove_one()
Interrupts will always be enabled in srp_remove_one(), so
spin_lock_irq() can be used instead of spin_lock_irqsave().
Also, the loop takes target->scsi_host->host_lock, so target->state
can just be set to SRP_TARGET_REMOVED witout testing the old value.

Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:31 -07:00
Matthew Wilcox
b3589fd490 IB/srp: Change target_mutex to a spinlock
The SRP driver never sleeps while holding target_mutex, and it's just
used to protect some simple list operations, so hold times will be
short.  So just convert it to a spinlock, which is smaller and faster.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:30 -07:00
Matthew Wilcox
549c5fc2c8 IB/srp: Get rid of unneeded use of list_for_each_entry_safe()
list_for_each_entry_safe() is used in one place where the list isn't
modified.  So just change it to list_for_each_entry().

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:30 -07:00
Matthew Wilcox
1962a4a1e4 IB/srp: Use SCAN_WILD_CARD from SCSI headers
SCAN_WILD_CARD is indeed available from <scsi/scsi.h>, which is
already included.  So get rid of private hack.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:30 -07:00
Roland Dreier
f5358a172f IB/srp: Use FMRs to map gather/scatter lists
Create an SRP FMR pool on HCAs that support FMRs, and use FMRs to map
gather/scatter lists that have more than one entry into a single
memory region that appears virtually contiguous to the SRP target
(which is the RDMA initiator).

This patch bails out on FMR mapping for SCSI commands where the
gather/scatter list cannot be mapped into a single FMR because there
are sub-page-sized entries in middle of the list.  An unaligned
start or end of the list is OK.

Based on a patch by Vu Pham <vuhuong@mellanox.com>.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:29 -07:00
Ishai Rabinovitz
093beac189 IB/srp: Complete correct SCSI commands on device reset
When flushing out queued commands after a successful device reset,
make sure that SRP completes the right commands, instead of calling
scsi_done on the command passed into the device reset handler over and
over.

Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-17 09:20:48 -07:00
Roland Dreier
ec2d720849 IB/srp: Get rid of extra scsi_host_put()s if reconnection fails
If a reconnection attempt fails, then SRP does two scsi_host_put()s.
This is a historical relic from an earlier version of the driver that
took a reference on the scsi_host before trying to reconnect, so get
rid of the extra scsi_host_put().

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-17 09:16:03 -07:00
Roland Dreier
e65810566f IB/srp: Don't wait for disconnection if sending DREQ fails
Sending a DREQ may fail, for example because the remote target has
already broken the connection.  If so, then SRP should not wait for
the disconnection to complete, because it never will.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-17 09:13:21 -07:00
Roland Dreier
d945e1df28 IB/srp: Fix tracking of pending requests during error handling
If a SCSI abort completes, or the command completes successfully, then
the driver must remove the command from its queue of pending
commands.  Similarly, if a device reset succeeds, then all commands
queued for the given device must be removed from the queue.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-09 10:50:28 -07:00
Roland Dreier
f80887d0b9 IB/srp: Remove request from list when SCSI abort succeeds
If a SCSI abort succeeds, then the aborted request should to be
removed from the list of pending requests.  This fixes list corruption
after an abort occurs.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-19 11:40:10 -07:00
Roland Dreier
ce1823f032 IB/srp: Fix memory leak in options parsing
Fix memory leak if parsing destination GID fails.

Coverity bug 1042

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-03 09:31:04 -07:00
Roland Dreier
3f89f83449 IB/srp: Fix unmapping of fake scatterlist
The recently merged patch to create a fake scatterlist for non-SG SCSI
commands had a bug: the driver ended up doing dma_unmap_sg() on a
scatterlist scmnd->request_buffer rather than the fake scatter list it
created.  Fix this so that the driver unmaps the same thing it maps.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-29 09:36:45 -08:00
Roland Dreier
cf368713a3 IB/srp: Use a fake scatterlist for non-SG SCSI commands
Since the SCSI midlayer is moving towards entirely getting rid of
commands with use_sg == 0, we should treat this case as an exception.
Therefore, change the IB SRP initiator to create a fake scatterlist
for these commands with sg_init_one().  This simplifies the flow of
DMA mapping and unmapping, since SRP can just use dma_map_sg() and
dma_unmap_sg() unconditionally, rather than having to choose between
the dma_{map,unmap}_sg() and dma_{map,unmap}_single() variants.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-24 15:47:26 -08:00
Roland Dreier
bf17c1c7cc IB/srp: Coverity fix to srp_parse_options()
Fix leak found by Coverity: in the SRP_OPT_DGID case,
srp_parse_options() didn't free the result of match_strdup().

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20 10:08:25 -08:00
Roland Dreier
6ecb0c8496 IB/srp: Add SCSI host attributes to show target port
Add SCSI host attributes in sysfs that show the ID extension, IOC
GUID, service ID, P_Key and destination GID for each target port that
the SRP initiator connects to.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20 10:08:23 -08:00
Roland Dreier
1285b3a0b0 IB/srp: Don't send task management commands after target removal
Just fail abort and reset requests that come in after we've already
decided to remove a target.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-03 17:50:16 -08:00
Ingo Molnar
8e9e5f4f5e IB/srp: Semaphore to mutex conversion
Convert srp_host->target_mutex from a semaphore to a mutex.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-30 15:21:21 -08:00
Sean Hefty
cf311cd49a IB: Add node_guid to struct ib_device
Add a node_guid field to struct ib_device.  It is the responsibility
of the low-level driver to initialize this field before registering a
device with the midlayer.  Convert everyone to looking at this field
instead of calling ib_query_device() when all they want is the node
GUID, and remove the node_guid field from struct ib_device_attr.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-10 07:39:34 -08:00
Tim Schmielau
de25968cc8 [PATCH] fix more missing includes
Include fixes for 2.6.14-git11.  Should allow to remove sched.h from
module.h on i386, x86_64, arm, ia64, ppc, ppc64, and s390.  Probably more
to come since I haven't yet checked the other archs.

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:45 -08:00
Roland Dreier
47f2bce902 [IB] srp: don't post receive if no send buf available
Have __srp_get_tx_iu() fail if the target port's request limit will
not allow the initiator to post a send.  This avoids continuing on and
posting a receive, and then failing to post a corresponding send.  If
that happens, then the initiator will end up with an extra receive
posted, and if this happens to much, the receive queue will overflow.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-15 00:19:21 -08:00
Roland Dreier
5f068992a1 [IB] srp: increase max_luns
Increase SRP max_luns to 512 to match the kernel's default, since SRP
storage targets can have lots of LUNs and the SRP initiator itself
doesn't have any particular limit.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-11 14:06:01 -08:00
Olaf Hering
733482e445 [PATCH] changing CONFIG_LOCALVERSION rebuilds too much, for no good reason
This patch removes almost all inclusions of linux/version.h.  The 3
#defines are unused in most of the touched files.

A few drivers use the simple KERNEL_VERSION(a,b,c) macro, which is
unfortunatly in linux/version.h.

There are also lots of #ifdef for long obsolete kernels, this was not
touched.  In a few places, the linux/version.h include was move to where
the LINUX_VERSION_CODE was used.

quilt vi `find * -type f -name "*.[ch]"|xargs grep -El '(UTS_RELEASE|LINUX_VERSION_CODE|KERNEL_VERSION|linux/version.h)'|grep -Ev '(/(boot|coda|drm)/|~$)'`

search pattern:
/UTS_RELEASE\|LINUX_VERSION_CODE\|KERNEL_VERSION\|linux\/\(utsname\|version\).h

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:55:57 -08:00
Roland Dreier
aef9ec39c4 IB: Add SCSI RDMA Protocol (SRP) initiator
Add an InfiniBand SCSI RDMA Protocol (SRP) initiator.  This driver is
used to talk talk to InfiniBand SRP targets (storage devices).

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02 14:07:13 -08:00