Commit graph

201367 commits

Author SHA1 Message Date
Jesper Nilsson
32e7a8ba8d CRIS: Machine dependent memmap.h
Move the old one to mach-fs and replace with a new one that
only include the correct one for the machine architecture.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 13:02:35 +02:00
Jesper Nilsson
243ba2fa46 CRIS: Check if pointer is set before using it
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 13:02:34 +02:00
Jesper Nilsson
a3af54ffa9 CRIS: Machine dependent dma.h
Move the old one to mach-fs and replace with a new one that
only include the correct one for the machine architecture.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 13:02:34 +02:00
Jesper Nilsson
6fdf581e9d CRIS: Define __read_mostly for CRISv32
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 13:02:33 +02:00
Jesper Nilsson
d717809bce CRIS: Discard .note.gnu.build-id section
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 13:02:33 +02:00
Jesper Nilsson
76fdf67bb5 CRIS: Avoid compilation warning for puts
Rename to aputs.
Also, simplify code by moving some common code out to macros.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 13:02:32 +02:00
Jesper Nilsson
ac93f62179 CRIS: Add debug for assembler macros
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 13:02:31 +02:00
Jesper Nilsson
7ec280c52c CRIS: Update for ARTPEC-3
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 13:02:31 +02:00
Jesper Nilsson
98560bd83e CRIS: Add more delays in DDR setup
Also, make DDR latency configurable.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 13:02:30 +02:00
Jesper Nilsson
2d0503d1a6 CRIS: Add debug info for assembler code
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 13:02:30 +02:00
Jesper Nilsson
3a38125d3e CRIS: Add debug info for assembler code
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 13:02:29 +02:00
Jesper Nilsson
5f9ac92f3d CRIS: Add debug symbols for assembler code
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 13:02:29 +02:00
Jesper Nilsson
e2ee9bb225 CRIS: Minor formatting fix in traps.c
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 13:02:15 +02:00
Jesper Nilsson
399233265c CRIS: v32: Correct auto-restart of syscalls
Register number was incorrect in syscalls
that go via the restartblock (e.g, poll).

Signed-off-by: Edgar Iglesias <Edgar.Iglesias@axis.com>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 13:02:01 +02:00
Jesper Nilsson
e281a31e1c CRIS: More ARTPEC-3 support and i2c-boardinfo.
Add standard i2d-devices.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 13:01:50 +02:00
Jesper Nilsson
c9cbf097b7 CRIS: Remove obsolete pinmux.c, now machine dependent.
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 13:01:29 +02:00
Jesper Nilsson
ab43d14dab CRIS: kgdb: Fix compilation errors
Paths were not correct and pack_hex_byte() takes two arguments.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 13:01:12 +02:00
Jesper Nilsson
e336285db2 CRIS: v32: Correct path for intr_vect.h
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 13:00:53 +02:00
Jesper Nilsson
e75a320eda CRIS: v32: Better irq mapping code
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 13:00:45 +02:00
Jesper Nilsson
403a1c4f13 CRIS: v32: Correct address for romfs in the image
Is after __bss_start, not __vmlinux_end

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 13:00:30 +02:00
Jesper Nilsson
345c52e079 CRIS: Additional mmu settings for ARTPEC-3
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 13:00:20 +02:00
Jesper Nilsson
cd4f20110c CRIS: Faster syscall entry for CRISv32.
Signed-off-by: Edgar Iglesias <Edgar.Iglesias@axis.com>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 13:00:09 +02:00
Jesper Nilsson
43f6cdd769 CRIS: Simple insn reschedule to avoid interlocks.
Brings down the CPI from ~1.5 to ~1.1.

Signed-off-by: Edgar Iglesias <Edgar.Iglesias@axis.com>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 13:00:00 +02:00
Jesper Nilsson
a80a635f3d CRIS: Add debug for assembler functions
Signed-off-by: Edgar Iglesias <Edgar.Iglesias@axis.com>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 12:59:43 +02:00
Jesper Nilsson
b4973ae9da CRIS: Correct address of the romfs in boot image
The romfs should land after __init_end

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 12:59:43 +02:00
Jesper Nilsson
d77eab8cb1 CRIS: Fasttimer: Remove obsolete ifdef
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 12:59:42 +02:00
Jesper Nilsson
5866d7ef95 CRIS: Better link to rs485 in help
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 12:59:42 +02:00
Jesper Nilsson
fcb31dbb36 CRIS: Remove CVS tag.
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 12:59:41 +02:00
Jesper Nilsson
0e0aff2126 CRIS: v10: remove all BKL usage
We don't need to take the BKL here.
Also fixes compile error after last commit (smp_lock.h was not included)

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 12:59:28 +02:00
Jesper Nilsson
60362158e2 CRIS: gpio: don't call copy_to_user()/copy_from_user() while holding spinlocks
copy_to_user()/copy_from_user() must not be used with spinlocks held.
Move locks inside each case so we have better control of when the locks
are held.

Also, since we use spinlocks, we don't need to hold the BKL, so remove it.

Reported-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 12:59:14 +02:00
Joe Perches
16bc0fe5ce arch/cris: Remove unnecessary casts of private_data
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 12:59:06 +02:00
Jesper Nilsson
096b7bdc86 cris: autoconvert trivial BKL users to private mutex
All these files use the big kernel lock in a trivial
way to serialize their private file operations,
typically resulting from an earlier semi-automatic
pushdown from VFS.

None of these drivers appears to want to lock against
other code, and they all use the BKL as the top-level
lock in their file operations, meaning that there
is no lock-order inversion problem.

Consequently, we can remove the BKL completely,
replacing it with a per-file mutex in every case.
Using a scripted approach means we can avoid
typos.

file=$1
name=$2
if grep -q lock_kernel ${file} ; then
    if grep -q 'include.*linux.mutex.h' ${file} ; then
            sed -i '/include.*<linux\/smp_lock.h>/d' ${file}
    else
            sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file}
    fi
    sed -i ${file} \
        -e "/^#include.*linux.mutex.h/,$ {
                1,/^\(static\|int\|long\)/ {
                     /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex);

} }"  \
    -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \
    -e '/[      ]*cycle_kernel_lock();/d'
else
    sed -i -e '/include.*\<smp_lock.h\>/d' ${file}  \
                -e '/cycle_kernel_lock()/d'
fi

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 12:59:06 +02:00
Jesper Nilsson
90276a1a64 cris: Pushdown the bkl from ioctl
From: Frederic Weisbecker <fweisbec@gmail.com>

Pushdown the bkl to the remaining drivers using the
deprecated .ioctl.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
2010-08-04 12:58:57 +02:00
Jesper Nilsson
3648bdf79f CRIS: invoke oom-killer from page fault
As explained in commit 1c0fe6e3bd, we want to call the architecture independent
oom killer when getting an unexplained OOM from handle_mm_fault, rather than
simply killing current.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Mikael Starvik <starvik@axis.com>
2010-08-04 12:58:56 +02:00
Jesper Nilsson
60dbd66331 CRIS: GENERIC_TIME fixes
GENERIC_TIME was not functional for CRIS, giving random backward
time jumps.

For CRISv32 implement a new clocksource using the free running counter
and ditch the arch_gettimeoffset.

The random time jumps still existed, but turned out to be the write_seqlock
which was missing around our do_timer() call.

So switch over to GENERIC_TIME using the clocksource for CRISv32.

CRISv10 doesn't have the free running counter needed for the
clocksource trick, but we can still use GENERIC_TIME with
arch_gettimeoffset.

Unfortunately, there were problems in using the prescaler register
to timer0 for the gettimeoffset calculation, so it is now ignored,
making our resolution worse by the tune of 40usec (0.4%) worst case.

At the same time, clean up some formatting and use NSEC_PER_SEC
instead of 1000000000.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04 12:58:55 +02:00
Latchesar Ionkov
26bfeea38a 9p: Pass the correct end of buffer to p9stat_read
Pass the correct end of the buffer to p9stat_read.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-04 12:58:55 +02:00
Jon Povey
6a99ad4a2e gpio: fix spurious printk when freeing a gpio
When freeing a gpio that has not been exported, gpio_unexport() prints a
debug message when it should just fall through silently.

Example spurious message:

	gpio_unexport: gpio0 status -22

Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
Cc: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-27 14:32:07 -07:00
Anton Vorontsov
952e1c6632 edac: mpc85xx: fix coldplug/hotplug module autoloading
The MPC85xx EDAC driver is missing module device aliases, so the driver
won't load automatically on boot.  This patch fixes the issue by adding
proper MODULE_DEVICE_TABLE() macros.

Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Dave Jiang <djiang@mvista.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-27 14:32:06 -07:00
Rudolf Marek
2884fce165 drivers/rtc/rtc-rx8581.c: fix setdatetime
Fix the logic while writing new date/time to the chip.  The driver
incorrectly wrote back register values to different registers and even
with wrong mask.  The patch adds clearing of the VLF register, which
should be cleared if all date/time values are set.

Signed-off-by: Rudolf Marek <rudolf.marek@sysgo.com>
Acked-by: Wan ZongShun <mcuos.com@gmail.com>
Cc: Martyn Welch <martyn.welch@gefanuc.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-27 14:32:06 -07:00
Jason Baron
b82bab4bbe dynamic debug: move ddebug_remove_module() down into free_module()
The command

	echo "file ec.c +p" >/sys/kernel/debug/dynamic_debug/control

causes an oops.

Move the call to ddebug_remove_module() down into free_module().  In this
way it should be called from all error paths.  Currently, we are missing
the remove if the module init routine fails.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Reported-by: Thomas Renninger <trenn@suse.de>
Tested-by: Thomas Renninger <trenn@suse.de>
Cc: <stable@kernel.org>		[2.6.32+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-27 14:32:06 -07:00
Linus Torvalds
d15aa2cc64 Merge branch 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/perf
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/perf:
  perf, powerpc: Use perf_sample_data_init() for the FSL code
2010-07-27 09:23:39 -07:00
Linus Torvalds
02e7cce2bc Merge git://git.infradead.org/users/cbou/battery-2.6.35
* git://git.infradead.org/users/cbou/battery-2.6.35:
  ds2782_battery: Rename get_current to fix build failure / name conflict
2010-07-27 09:22:55 -07:00
Linus Torvalds
a376bca610 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  s2io: fixing DBG_PRINT() macro
  ath9k: fix dma direction for map/unmap in ath_rx_tasklet
  net: dev_forward_skb should call nf_reset
  net sched: fix race in mirred device removal
  tun: avoid BUG, dump packet on GSO errors
  bonding: set device in RLB ARP packet handler
  wimax/i2400m: Add PID & VID for Intel WiMAX 6250
  ipv6: Don't add routes to ipv6 disabled interfaces.
  net: Fix skb_copy_expand() handling of ->csum_start
  net: Fix corruption of skb csum field in pskb_expand_head() of net/core/skbuff.c
  macvtap: Limit packet queue length
  ixgbe/igb: catch invalid VF settings
  bnx2x: Advance a module version
  bnx2x: Protect statistics ramrod and sequence number
  bnx2x: Protect a SM state change
  wireless: use netif_rx_ni in ieee80211_send_layer2_update
2010-07-27 09:21:00 -07:00
Peter Zijlstra
6b95ed345b perf, powerpc: Use perf_sample_data_init() for the FSL code
We should use perf_sample_data_init() to initialize struct
perf_sample_data.  As explained in the description of commit dc1d628a
("perf: Provide generic perf_sample_data initialization"), it is
possible for userspace to get the kernel to dereference data.raw,
so if it is not initialized, that means that unprivileged userspace
can possibly oops the kernel.  Using perf_sample_data_init makes sure
it gets initialized to NULL.

This conversion should have been included in commit dc1d628a, but it
got missed.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2010-07-27 22:20:09 +10:00
Linus Torvalds
1a041a23da Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Do not try to disable hpet if it hasn't been initialized before
  x86, i8259: Only register sysdev if we have a real 8259 PIC
2010-07-26 16:02:07 -07:00
Breno Leitao
5447080cfa s2io: fixing DBG_PRINT() macro
Patch 9e39f7c5b3 changed the
DBG_PRINT() macro and the if clause was wrongly changed. It means
that currently all the DBG_PRINT are being printed, flooding the
kernel log buffer with things like:

s2io: eth6: Next block at: c0000000b9c90000
s2io: eth6: In Neterion Tx routine

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Acked-by: Sreenivasa Honnur <Sreenivasa.Honnur@neterion.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26 15:37:30 -07:00
Linus Torvalds
ee13cbdec4 Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] powernow-k8: Limit Pstate transition latency check
  [CPUFREQ] Fix PCC driver error path
  [CPUFREQ] fix double freeing in error path of pcc-cpufreq
  [CPUFREQ] pcc driver should check for pcch method before calling _OSC
  [CPUFREQ] fix memory leak in cpufreq_add_dev
  [CPUFREQ] revert "[CPUFREQ] remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)"
2010-07-26 15:35:53 -07:00
Linus Torvalds
863da9557e Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus:
  MIPS: Set io_map_base for several PCI bridges lacking it
  MIPS: Alchemy: Define eth platform devices in the correct order
  MIPS: BCM63xx: Prevent second enet registration on BCM6338
  MIPS: Quit using undefined behavior of ADDU in 64-bit atomic operations.
  MIPS: N32: Define getdents64.
  MIPS: MTX-1: Fix PCI on the MeshCube and related boards
  MIPS: Make init_vdso a subsys_initcall.
  MIPS: "Fix" useless 'init_vdso successfully' message.
  MIPS: PowerTV: Move register setup to before reading registers.
  SOUND: Au1000: Fix section mismatch
  VIDEO: Au1100fb: Fix section mismatch
  VIDEO: PMAGB-B: Fix section mismatch
  VIDEO: PMAG-BA: Fix section mismatch
  NET: declance: Fix section mismatches
  VIDEO. gbefb: Fix section mismatches.
2010-07-26 15:35:04 -07:00
Jesse Barnes
5620ae29f1 drm/i915: make sure we shut off the panel in eDP configs
Fix error from the last pull request.  Making sure we shut the panel off
is more correct and saves power.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-26 15:34:16 -07:00
David S. Miller
a9ad99a612 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2010-07-26 13:26:09 -07:00