Commit graph

5071 commits

Author SHA1 Message Date
Linus Torvalds
48d4e137ea Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull a crypto fix from Herbert Xu:
 "This push fixes another bug in the atmel-rng that made it produce
  completely useless output."

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  hwrng: atmel-rng - fix data valid check
2012-06-18 12:20:36 -07:00
Peter Korsgaard
c475c06f4b hwrng: atmel-rng - fix data valid check
Brown paper bag: Data valid is LSB of the ISR (status register), and NOT
of ODATA (current random data word)!

With this, rngtest is a lot happier. Before:

rngtest 3
Copyright (c) 2004 by Henrique de Moraes Holschuh
This is free software; see the source for copying conditions.  There is NO warr.

rngtest: starting FIPS tests...
rngtest: bits received from input: 20000032
rngtest: FIPS 140-2 successes: 3
rngtest: FIPS 140-2 failures: 997
rngtest: FIPS 140-2(2001-10-10) Monobit: 604
rngtest: FIPS 140-2(2001-10-10) Poker: 996
rngtest: FIPS 140-2(2001-10-10) Runs: 36
rngtest: FIPS 140-2(2001-10-10) Long run: 0
rngtest: FIPS 140-2(2001-10-10) Continuous run: 117
rngtest: input channel speed: (min=622.371; avg=23682.481; max=28224.350)Kibitss
rngtest: FIPS tests speed: (min=12.361; avg=12.718; max=12.861)Mibits/s
rngtest: Program run time: 2331696 microsecondsx

After:
rngtest 3
Copyright (c) 2004 by Henrique de Moraes Holschuh
This is free software; see the source for copying conditions.  There is NO warr.

rngtest: starting FIPS tests...
rngtest: bits received from input: 20000032
rngtest: FIPS 140-2 successes: 999
rngtest: FIPS 140-2 failures: 1
rngtest: FIPS 140-2(2001-10-10) Monobit: 0
rngtest: FIPS 140-2(2001-10-10) Poker: 0
rngtest: FIPS 140-2(2001-10-10) Runs: 1
rngtest: FIPS 140-2(2001-10-10) Long run: 0
rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
rngtest: input channel speed: (min=777.363; avg=43588.270; max=47870.711)Kibitss
rngtest: FIPS tests speed: (min=11.943; avg=12.716; max=12.844)Mibits/s
rngtest: Program run time: 1955282 microseconds

Cc: stable@vger.kernel.org
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reported-by: George Pontis <GPontis@z9.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-12 08:27:04 +08:00
Linus Torvalds
4e3c8a1b1c Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
 "This push fixes an unaligned fault on x86-32 with aesni-intel and an
  RNG failure with atmel-rng (repeated bits)."

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: aesni-intel - fix unaligned cbc decrypt for x86-32
  hwrng: atmel-rng - fix race condition leading to repeated bits
2012-06-11 16:31:52 +03:00
Eugeni Dodonov
67384fe3fd char/agp: add another Ironlake host bridge
This seems to come on Gigabyte H55M-S2V and was discovered through the
https://bugs.freedesktop.org/show_bug.cgi?id=50381 debugging.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50381
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-06 17:05:29 +02:00
Peter Korsgaard
121daad8fd hwrng: atmel-rng - fix race condition leading to repeated bits
Data valid gets cleared by reading the ISR (status register) and NOT from
reading ODATA (data register). A new data word can become available between
checking ISR and reading ODATA, causing us to reuse the same data word next
time atmel_trng_read() gets called, if that happens before the following
data word is ready.

With this fixed, rngtest no longer complains of 'Continous run' errors.
Before:

rngtest -c 1000 < /dev/hwrng
rngtest 3
Copyright (c) 2004 by Henrique de Moraes Holschuh
This is free software; see the source for copying conditions.  There is NO warr.

rngtest: starting FIPS tests...
rngtest: bits received from input: 20000032
rngtest: FIPS 140-2 successes: 923
rngtest: FIPS 140-2 failures: 77
rngtest: FIPS 140-2(2001-10-10) Monobit: 0
rngtest: FIPS 140-2(2001-10-10) Poker: 0
rngtest: FIPS 140-2(2001-10-10) Runs: 1
rngtest: FIPS 140-2(2001-10-10) Long run: 0
rngtest: FIPS 140-2(2001-10-10) Continuous run: 76
rngtest: input channel speed: (min=721.402; avg=46003.510; max=49321.338)Kibitss
rngtest: FIPS tests speed: (min=11.442; avg=12.714; max=12.801)Mibits/s
rngtest: Program run time: 1931860 microseconds

After:

rngtest -c 1000 < /dev/hwrng
rngtest 3
Copyright (c) 2004 by Henrique de Moraes Holschuh
This is free software; see the source for copying conditions.  There is NO warr.

rngtest: starting FIPS tests...
rngtest: bits received from input: 20000032
rngtest: FIPS 140-2 successes: 1000
rngtest: FIPS 140-2 failures: 0
rngtest: FIPS 140-2(2001-10-10) Monobit: 0
rngtest: FIPS 140-2(2001-10-10) Poker: 0
rngtest: FIPS 140-2(2001-10-10) Runs: 0
rngtest: FIPS 140-2(2001-10-10) Long run: 0
rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
rngtest: input channel speed: (min=777.518; avg=36988.482; max=43115.342)Kibitss
rngtest: FIPS tests speed: (min=11.951; avg=12.715; max=12.887)Mibits/s
rngtest: Program run time: 2035543 microseconds

Cc: stable@vger.kernel.org
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reported-by: George Pontis <GPontis@z9.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-05-31 20:53:08 +10:00
Linus Torvalds
f2fde3a65e Merge branch 'drm-core-next' of git://people.freedesktop.org/~airlied/linux
Pull main drm updates from Dave Airlie:
 "This is the main merge window request for the drm.

  It's big, but jam packed will lots of features and of course 0
  regressions.  (okay maybe there'll be one).

  Highlights:

   - new KMS drivers for server GPU chipsets: ast, mgag200 and cirrus
     (qemu only).  These drivers use the generic modesetting drivers.

   - initial prime/dma-buf support for i915, nouveau, radeon, udl and
     exynos

   - switcheroo audio support: so GPUs with HDMI can turn off the sound
     driver without crashing stuff.

   - There are some patches drifting outside drivers/gpu into x86 and
     EFI for better handling of multiple video adapters in Apple Macs,
     they've got correct acks except one trivial fixup.

   - Core:
	edid parser has better DMT and reduced blanking support,
	crtc properties,
	plane properties,

   - Drivers:
	exynos: add 2D core accel support, prime support, hdmi features
	intel: more Haswell support, initial Valleyview support, more
	    hdmi infoframe fixes, update MAINTAINERS for Daniel, lots of
	    cleanups and fixes
	radeon: more HDMI audio support, improved GPU lockup recovery
	    support, remove nested mutexes, less memory copying on PCIE, fix
	    bus master enable race (kexec), improved fence handling
	gma500: cleanups, 1080p support, acpi fixes
	nouveau: better nva3 memory reclocking, kepler accel (needs
	    external firmware rip), async buffer moves on nv84+ hw.

  I've some more dma-buf patches that rely on the dma-buf merge for vmap
  stuff, and I've a few fixes building up, but I'd decided I'd better
  get rid of the main pull sooner rather than later, so the audio guys
  are also unblocked."

Fix up trivial conflict due to some duplicated changes in
drivers/gpu/drm/i915/intel_ringbuffer.c

* 'drm-core-next' of git://people.freedesktop.org/~airlied/linux: (605 commits)
  drm/nouveau/nvd9: Fix GPIO initialisation sequence.
  drm/nouveau: Unregister switcheroo client on exit
  drm/nouveau: Check dsm on switcheroo unregister
  drm/nouveau: fix a minor annoyance in an output string
  drm/nouveau: turn a BUG into a WARN
  drm/nv50: decode PGRAPH DATA_ERROR = 0x24
  drm/nouveau/disp: fix dithering not being enabled on some eDP macbooks
  drm/nvd9/copy: initialise copy engine, seems to work like nvc0
  drm/nvc0/ttm: use copy engines for async buffer moves
  drm/nva3/ttm: use copy engine for async buffer moves
  drm/nv98/ttm: add in a (disabled) crypto engine buffer copy method
  drm/nv84/ttm: use crypto engine for async buffer copies
  drm/nouveau/ttm: untangle code to support accelerated buffer moves
  drm/nouveau/fbcon: use fence for sync, rather than notifier
  drm/nv98/crypt: non-stub implementation of the engine hooks
  drm/nouveau/fifo: turn all fifo modules into engine modules
  drm/nv50/graph: remove ability to do interrupt-driven context switching
  drm/nv50: remove manual context unload on context destruction
  drm/nv50: remove execution engine context saves on suspend
  drm/nv50/fifo: use hardware channel kickoff functionality
  ...
2012-05-24 12:42:54 -07:00
Linus Torvalds
0bd3fbd4ab Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
 - New cipher/hash driver for ARM ux500.
 - Code clean-up for aesni-intel.
 - Misc fixes.

Fixed up conflicts in arch/arm/mach-ux500/devices-common.h, where quite
frankly some of it made no sense at all (the pull brought in a
declaration for the dbx500_add_platform_device_noirq() function, which
neither exists nor is used anywhere).

Also some trivial add-add context conflicts in the Kconfig file in
drivers/{char/hw_random,crypto}/

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: aesni-intel - move more common code to ablk_init_common
  crypto: aesni-intel - use crypto_[un]register_algs
  crypto: ux500 - Cleanup hardware identification
  crypto: ux500 - Update DMA handling for 3.4
  mach-ux500: crypto - core support for CRYP/HASH module.
  crypto: ux500 - Add driver for HASH hardware
  crypto: ux500 - Add driver for CRYP hardware
  hwrng: Kconfig - modify default state for atmel-rng driver
  hwrng: omap - use devm_request_and_ioremap
  crypto: crypto4xx - move up err_request_irq label
  crypto, xor: Sanitize checksumming function selection output
  crypto: caam - add backward compatible string sec4.0
2012-05-23 15:59:10 -07:00
Linus Torvalds
6f73b3629f Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Benjamin Herrenschmidt:
 "Here are the powerpc goodies for 3.5.  Main highlights are:

   - Support for the NX crypto engine in Power7+
   - A bunch of Anton goodness, including some micro optimization of our
     syscall entry on Power7
   - I converted a pile of our thermal control drivers to the new i2c
     APIs (essentially turning the old therm_pm72 into a proper set of
     windfarm drivers).  That's one more step toward removing the
     deprecated i2c APIs, there's still a few drivers to fix, but we are
     getting close
   - kexec/kdump support for 47x embedded cores

  The big missing thing here is no updates from Freescale.  Not sure
  what's up here, but with Kumar not working for them anymore things are
  a bit in a state of flux in that area."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (71 commits)
  powerpc: Fix irq distribution
  Revert "powerpc/hw-breakpoint: Use generic hw-breakpoint interfaces for new PPC ptrace flags"
  powerpc: Fixing a cputhread code documentation
  powerpc/crypto: Enable the PFO-based encryption device
  powerpc/crypto: Build files for the nx device driver
  powerpc/crypto: debugfs routines and docs for the nx device driver
  powerpc/crypto: SHA512 hash routines for nx encryption
  powerpc/crypto: SHA256 hash routines for nx encryption
  powerpc/crypto: AES-XCBC mode routines for nx encryption
  powerpc/crypto: AES-GCM mode routines for nx encryption
  powerpc/crypto: AES-ECB mode routines for nx encryption
  powerpc/crypto: AES-CTR mode routines for nx encryption
  powerpc/crypto: AES-CCM mode routines for nx encryption
  powerpc/crypto: AES-CBC mode routines for nx encryption
  powerpc/crypto: nx driver code supporting nx encryption
  powerpc/pseries: Enable the PFO-based RNG accelerator
  powerpc/pseries/hwrng: PFO-based hwrng driver
  powerpc/pseries: Add PFO support to the VIO bus
  powerpc/pseries: Add pseries update notifier for OFDT prop changes
  powerpc/pseries: Add new hvcall constants to support PFO
  ...
2012-05-23 09:02:42 -07:00
Linus Torvalds
fb09bafda6 Staging tree pull request for 3.5-rc1
Here is the big staging tree pull request for the 3.5-rc1 merge window.
 
 Loads of changes here, and we just narrowly added more lines than we
 added:
  622 files changed, 28356 insertions(+), 26059 deletions(-)
 
 But, good news is that there is a number of subsystems that moved out of
 the staging tree, to their respective "real" portions of the kernel.
 
 Code that moved out was:
 	- iio core code
 	- mei driver
 	- vme core and bridge drivers
 
 There was one broken network driver that moved into staging as a step
 before it is removed from the tree (pc300), and there was a few new
 drivers added to the tree:
 	- new iio drivers
 	- gdm72xx wimax USB driver
 	- ipack subsystem and 2 drivers
 
 All of the movements around have acks from the various subsystem
 maintainers, and all of this has been in the linux-next tree for a
 while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk+7q8MACgkQMUfUDdst+ymjogCguo8fANFVlPWeZGeoBTL+aQfQ
 yTkAoLE0codmh+2SvhulYgyU1Wh6ZDK2
 =nJ2F
 -----END PGP SIGNATURE-----

Merge tag 'staging-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging tree changes from Greg Kroah-Hartman:
 "Here is the big staging tree pull request for the 3.5-rc1 merge
  window.

  Loads of changes here, and we just narrowly added more lines than we
  added:
   622 files changed, 28356 insertions(+), 26059 deletions(-)

  But, good news is that there is a number of subsystems that moved out
  of the staging tree, to their respective "real" portions of the
  kernel.

  Code that moved out was:
	- iio core code
	- mei driver
	- vme core and bridge drivers

  There was one broken network driver that moved into staging as a step
  before it is removed from the tree (pc300), and there was a few new
  drivers added to the tree:
	- new iio drivers
	- gdm72xx wimax USB driver
	- ipack subsystem and 2 drivers

  All of the movements around have acks from the various subsystem
  maintainers, and all of this has been in the linux-next tree for a
  while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fixed up various trivial conflicts, along with a non-trivial one found
in -next and pointed out by Olof Johanssen: a clean - but incorrect -
merge of the arch/arm/boot/dts/at91sam9g20.dtsi file.  Fix up manually
as per Stephen Rothwell.

* tag 'staging-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (536 commits)
  Staging: bcm: Remove two unused variables from Adapter.h
  Staging: bcm: Removes the volatile type definition from Adapter.h
  Staging: bcm: Rename all "INT" to "int" in Adapter.h
  Staging: bcm: Fix warning: __packed vs. __attribute__((packed)) in Adapter.h
  Staging: bcm: Correctly format all comments in Adapter.h
  Staging: bcm: Fix all whitespace issues in Adapter.h
  Staging: bcm: Properly format braces in Adapter.h
  Staging: ipack/bridges/tpci200: remove unneeded casts
  Staging: ipack/bridges/tpci200: remove TPCI200_SHORTNAME constant
  Staging: ipack: remove board_name and bus_name fields from struct ipack_device
  Staging: ipack: improve the register of a bus and a device in the bus.
  staging: comedi: cleanup all the comedi_driver 'detach' functions
  staging: comedi: remove all 'default N' in Kconfig
  staging: line6/config.h: Delete unused header
  staging: gdm72xx depends on NET
  staging: gdm72xx: Set up parent link in sysfs for gdm72xx devices
  staging: drm/omap: initial dmabuf/prime import support
  staging: drm/omap: dmabuf/prime mmap support
  pstore/ram: Add ECC support
  pstore/ram: Switch to persistent_ram routines
  ...
2012-05-22 16:34:21 -07:00
Linus Torvalds
5d4e2d08e7 Driver core pull for 3.5-rc1
Here's the driver core, and other driver subsystems, pull request for
 the 3.5-rc1 merge window.
 
 Outside of a few minor driver core changes, we ended up with the
 following different subsystem and core changes as well, due to
 interdependancies on the driver core:
  - hyperv driver updates
  - drivers/memory being created and some drivers moved into it
  - extcon driver subsystem created out of the old Android staging switch
    driver code
  - dynamic debug updates
  - printk rework, and /dev/kmsg changes
 
 All of this has been tested in the linux-next releases for a few weeks
 with no reported problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk+7q28ACgkQMUfUDdst+ykXmwCfcPASzC+/bDkuqdWsqzxlWZ7+
 VOQAnAriySv397St36J6Hz5bMQZwB1Yq
 =SQc+
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg Kroah-Hartman:
 "Here's the driver core, and other driver subsystems, pull request for
  the 3.5-rc1 merge window.

  Outside of a few minor driver core changes, we ended up with the
  following different subsystem and core changes as well, due to
  interdependancies on the driver core:
   - hyperv driver updates
   - drivers/memory being created and some drivers moved into it
   - extcon driver subsystem created out of the old Android staging
     switch driver code
   - dynamic debug updates
   - printk rework, and /dev/kmsg changes

  All of this has been tested in the linux-next releases for a few weeks
  with no reported problems.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up conflicts in drivers/extcon/extcon-max8997.c where git noticed
that a patch to the deleted drivers/misc/max8997-muic.c driver needs to
be applied to this one.

* tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (90 commits)
  uio_pdrv_genirq: get irq through platform resource if not set otherwise
  memory: tegra{20,30}-mc: Remove empty *_remove()
  printk() - isolate KERN_CONT users from ordinary complete lines
  sysfs: get rid of some lockdep false positives
  Drivers: hv: util: Properly handle version negotiations.
  Drivers: hv: Get rid of an unnecessary check in vmbus_prep_negotiate_resp()
  memory: tegra{20,30}-mc: Use dev_err_ratelimited()
  driver core: Add dev_*_ratelimited() family
  Driver Core: don't oops with unregistered driver in driver_find_device()
  printk() - restore prefix/timestamp printing for multi-newline strings
  printk: add stub for prepend_timestamp()
  ARM: tegra30: Make MC optional in Kconfig
  ARM: tegra20: Make MC optional in Kconfig
  ARM: tegra30: MC: Remove unnecessary BUG*()
  ARM: tegra20: MC: Remove unnecessary BUG*()
  printk: correctly align __log_buf
  ARM: tegra30: Add Tegra Memory Controller(MC) driver
  ARM: tegra20: Add Tegra Memory Controller(MC) driver
  printk() - restore timestamp printing at console output
  printk() - do not merge continuation lines of different threads
  ...
2012-05-22 16:02:13 -07:00
Linus Torvalds
fb2123fad3 Char/Misc patches for 3.5-rc1
Here are a few various char/misc tree patches for the 3.5-rc1 merge window.
 
 Nothing major here at all, just different driver updates and some parport dead
 code removal.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk+7qxoACgkQMUfUDdst+ynz0gCggUMf6y60T1rPVT7h2Ab3iy5k
 9d0An0U607GRDK1e5lwbZdGuuRkfBwRi
 =NpES
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull Char/Misc patches from Greg Kroah-Hartman:
 "Here are a few various char/misc tree patches for the 3.5-rc1 merge
  window.

  Nothing major here at all, just different driver updates and some
  parport dead code removal.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'char-misc-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  parport: remove unused dead code from lowlevel drivers
  xilinx_hwicap: reset XHI_MAX_RETRIES
  xilinx_hwicap: add support for virtex6 FPGAs
  Support M95040 SPI EEPROM
  misc: add support for bmp18x chips to the bmp085 driver
  misc: bmp085: add device tree properties
  misc: clean up bmp085 driver
  misc: do not mark exported functions __devexit
  misc: add missing __devexit_p() annotations
  pch_phub: delete duplicate definitions
  misc: Fix irq leak in max8997_muic_probe error path
2012-05-22 15:53:59 -07:00
Linus Torvalds
9bc747bea5 arm-soc: First batch of cleanups
These cleanups are basically all over the place. The idea is to collect
 changes with minimal impact but large number of changes so we can avoid
 them from distracting in the diffstat in the other series.
 
 A significant number of lines get removed here, in particular because
 the ixp2000 and ixp23xx platforms get removed. These have never been
 extremely popular and have fallen into disuse over time with no active
 maintainer taking care of them. The u5500 soc never made it into a
 product, so we are removing it from the ux500 platform.
 
 Many good cleanups also went into the at91 and omap platforms, as has
 been the case for a number of releases.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPuemiAAoJEIwa5zzehBx3L9oQAKiu0bsCiT6BM3VC5VGpluk7
 YVLH/fkYGdSUTeGrpjeaoxxZnN5M1CLwErg3DxWcyYidy0zfmqitC8t2KQxZMxuf
 bt+hn4flpFnXMNm31B9xBCXOOVAvteZHYS35FdSKGyWo5Kz2WKM8ZrrihkAA7jVi
 U75x4+shFPtIhLNg2sJg4e/9D1T14ypElB7W989NzxMtco5fbukVd6vDBHPlFDG3
 RVI2z2MbWUj3HVmdoyB+09ekruys0MQsbPOGo8D4aeJicrli/JBtL1r1w6ZZ6I8v
 Pe0+CbgemMWS69I37Zuxt35Bejpdofa8nKhT1jBrH4uHYxroKkhhx+VMTtuCcFVw
 Q2DhbbHImiW3598c0jkGi7Gk+TalTxkStMQiO3bqYAHApftdqFUgkpFSnOC/Jxgj
 Y6nUmd+GVPS+r0dDwZg4z5/AnUQd6t8Azp784muPDDxgTV1ZfdaC0LlLjdWesvMO
 x+PQib/U7NdxN5lifV6xCXpPoCQsgshrOkVUQiKVHmzaghm9MXgB8qrzXdTz3dLL
 XtR3+1KmSDTfHPSlTq/9vIN4RJtsKUnDWzNViTElEql36KzT7l5mJnBe6CJWirJh
 7JNyH0p6XDZfc2q7LgdiSU0dv/j9LzBaYUukQCyUI3Tk+5zKgAdKbYNJpRcfPuoO
 BK6OKbjCAoAHL+/nDU2s
 =Hcjs
 -----END PGP SIGNATURE-----

Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull first batch of arm-soc cleanups from Olof Johansson:
 "These cleanups are basically all over the place.  The idea is to
  collect changes with minimal impact but large number of changes so we
  can avoid them from distracting in the diffstat in the other series.

  A significant number of lines get removed here, in particular because
  the ixp2000 and ixp23xx platforms get removed.  These have never been
  extremely popular and have fallen into disuse over time with no active
  maintainer taking care of them.  The u5500 soc never made it into a
  product, so we are removing it from the ux500 platform.

  Many good cleanups also went into the at91 and omap platforms, as has
  been the case for a number of releases."

Trivial modify-delete conflicts in arch/arm/mach-{ixp2000,ixp23xx}

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (152 commits)
  ARM: clps711x: Cleanup IRQ handling
  ARM clps711x: Removed unused header mach/time.h
  ARM: clps711x: Added note about support EP731x CPU to Kconfig
  ARM: clps711x: Added missing register definitions
  ARM: clps711x: Used own subarch directory for store header file
  Dove: Fix Section mismatch warnings
  ARM: orion5x: ts78xx debugging changes
  ARM: orion5x: remove PM dependency from ts78xx
  ARM: orion5x: ts78xx fix NAND resource off by one
  ARM: orion5x: ts78xx whitespace cleanups
  Orion5x: Fix Section mismatch warnings
  Orion5x: Fix warning: struct pci_dev declared inside paramter list
  ARM: clps711x: Combine header files into one for clps711x-targets
  ARM: S3C24XX: Use common macro to define resources on mach-qt2410.c
  ARM: S3C24XX: Use common macro to define resources on mach-osiris.c
  ARM: EXYNOS: Adapt to cpuidle core time keeping and irq enable
  ARM: S5PV210: Use common macro to define resources on mach-smdkv210.c
  ARM: S5PV210: Use common macro to define resources on dev-audio.c
  ARM: S5PC100: Use common macro to define resources on dev-audio.c
  ARM: S5P64X0: Use common macro to define resources on dev-audio.c
  ...
2012-05-22 09:23:24 -07:00
Eugeni Dodonov
c14f52860e drm/i915: hook Haswell devices in place
This patch enables i915 driver to handle Haswell devices. It should go in
last, when things are working stable enough.

Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-19 22:39:52 +02:00
Amit Shah
fa8b66ccd2 virtio: console: tell host of open ports after resume from s3/s4
If a port was open before going into one of the sleep states, the port
can continue normal operation after restore.  However, the host has to
be told that the guest side of the connection is open to restore
pre-suspend state.

This wasn't noticed so far due to a bug in qemu that was fixed recently
(which marked the guest-side connection as always open).

CC: stable@vger.kernel.org   # Only for 3.3

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-05-17 12:14:33 +03:00
Anton Vorontsov
1894a253db ramoops: Move to fs/pstore/ram.c
Since ramoops was converted to pstore, it has nothing to do with character
devices nowadays. Instead, today it is just a RAM backend for pstore.

The patch just moves things around. There are a few changes were needed
because of the move:

1. Kconfig and Makefiles fixups, of course.

2. In pstore/ram.c we have to play a bit with MODULE_PARAM_PREFIX, this
   is needed to keep user experience the same as with ramoops driver
   (i.e. so that ramoops.foo kernel command line arguments would still
   work).

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Marco Stornelli <marco.stornelli@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-16 08:06:37 -07:00
Randy Dunlap
d109a674a3 ramoops: fix printk format warnings
Fix printk format warnings for phys_addr_t type variables:

drivers/char/ramoops.c:246:3: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'phys_addr_t'
drivers/char/ramoops.c:273:2: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'phys_addr_t'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-16 08:06:34 -07:00
Kees Cook
9ba80d99c8 ramoops: use pstore interface
Instead of using /dev/mem directly and forcing userspace to know (or
extract) where the platform has defined persistent memory, how many slots
it has, the sizes, etc, use the common pstore infrastructure to handle
Oops gathering and extraction.  This presents a much easier to use
filesystem-based view to the memory region.  This also means that any
other tools that are written to understand pstore will automatically be
able to process ramoops too.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Marco Stornelli <marco.stornelli@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-16 08:06:33 -07:00
Herbert Xu
b29e2679d0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux
Merge mainline to add prerequisite for ARM ux500 crypto support.
2012-05-15 17:21:26 +10:00
Kent Yoder
649e9ea0ab powerpc/pseries/hwrng: PFO-based hwrng driver
Adds support for the Platform Facilities Option (PFO)-based hardware
random number generator for POWER hardware.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-05-14 10:49:12 +10:00
Kay Sievers
7f3a781d6f printk - fix compilation for CONFIG_PRINTK=n
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09 15:51:09 -07:00
Kay Sievers
e11fea92e1 kmsg: export printk records to the /dev/kmsg interface
Support for multiple concurrent readers of /dev/kmsg, with read(),
seek(), poll() support. Output of message sequence numbers, to allow
userspace log consumers to reliably reconnect and reconstruct their
state at any given time. After open("/dev/kmsg"), read() always
returns *all* buffered records. If only future messages should be
read, SEEK_END can be used. In case records get overwritten while
/dev/kmsg is held open, or records get faster overwritten than they
are read, the next read() will return -EPIPE and the current reading
position gets updated to the next available record. The passed
sequence numbers allow the log consumer to calculate the amount of
lost messages.

  [root@mop ~]# cat /dev/kmsg
  5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ...
  6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  7,160,424069;pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
   SUBSYSTEM=acpi
   DEVICE=+acpi:PNP0A03:00
  6,339,5140900;NET: Registered protocol family 10
  30,340,5690716;udevd[80]: starting version 181
  6,341,6081421;FDC 0 is a S82078B
  6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0
  7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0
   SUBSYSTEM=scsi
   DEVICE=+scsi:1:0:0:0
  6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0

Cc: Karel Zak <kzak@redhat.com>
Tested-by: William Douglas <william.douglas@intel.com>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-07 17:03:27 -07:00
Kay Sievers
7ff9554bb5 printk: convert byte-buffer to variable-length record buffer
- Record-based stream instead of the traditional byte stream
  buffer. All records carry a 64 bit timestamp, the syslog facility
  and priority in the record header.

- Records consume almost the same amount, sometimes less memory than
  the traditional byte stream buffer (if printk_time is enabled). The record
  header is 16 bytes long, plus some padding bytes at the end if needed.
  The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for
  the timestamp and a newline.

- Buffer management is based on message sequence numbers. When records
  need to be discarded, the reading heads move on to the next full
  record. Unlike the byte-stream buffer, no old logged lines get
  truncated or partly overwritten by new ones. Sequence numbers also
  allow consumers of the log stream to get notified if any message in
  the stream they are about to read gets discarded during the time
  of reading.

- Better buffered IO support for KERN_CONT continuation lines, when printk()
  is called multiple times for a single line. The use of KERN_CONT is now
  mandatory to use continuation; a few places in the kernel need trivial fixes
  here. The buffering could possibly be extended to per-cpu variables to allow
  better thread-safety for multiple printk() invocations for a single line.

- Full-featured syslog facility value support. Different facilities
  can tag their messages. All userspace-injected messages enforce a
  facility value > 0 now, to be able to reliably distinguish them from
  the kernel-generated messages. Independent subsystems like a
  baseband processor running its own firmware, or a kernel-related
  userspace process can use their own unique facility values. Multiple
  independent log streams can co-exist that way in the same
  buffer. All share the same global sequence number counter to ensure
  proper ordering (and interleaving) and to allow the consumers of the
  log to reliably correlate the events from different facilities.

Tested-by: William Douglas <william.douglas@intel.com>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-07 16:53:02 -07:00
Dave Airlie
5bc69bf9ae Merge tag 'drm-intel-next-2012-04-23' of git://people.freedesktop.org/~danvet/drm-intel into drm-core-next
Daniel Vetter writes:

A new drm-intel-next pull. Highlights:
- More gmbus patches from Daniel Kurtz, I think gmbus is now ready, all
 known issues fixed.
- Fencing cleanup and pipelined fencing removal from Chris.
- rc6 residency interface from Ben, useful for powertop.
- Cleanups and code reorg around the ringbuffer code (Ben&me).
- Use hw semaphores in the pageflip code from Ben.
- More vlv stuff from Jesse, unfortunately his vlv cpu is doa, so less
 merged than I've hoped for - we still have the unused function warning :(
- More hsw patches from Eugeni, again, not yet enabled fully.
- intel_pm.c refactoring from Eugeni.
- Ironlake sprite support from Chris.
- And various smaller improvements/fixes all over the place.

Note that this pull request also contains a backmerge of -rc3 to sort out
a few things in -next. I've also had to frob the shortlog a bit to exclude
anything that -rc3 brings in with this pull.

Regression wise we have a few strange bugs going on, but for all of them
closer inspection revealed that they've been pre-existing, just now
slightly more likely to be hit. And for most of them we have a patch
already. Otherwise QA has not reported any regressions, and I'm also not
aware of anything bad happening in 3.4.

* tag 'drm-intel-next-2012-04-23' of git://people.freedesktop.org/~danvet/drm-intel: (420 commits)
  drm/i915: rc6 residency (fix the fix)
  drm/i915/tv: fix open-coded ARRAY_SIZE.
  drm/i915: invalidate render cache on gen2
  drm/i915: Silence the change of LVDS sync polarity
  drm/i915: add generic power management initialization
  drm/i915: move clock gating functionality into intel_pm module
  drm/i915: move emon functionality into intel_pm module
  drm/i915: move drps, rps and rc6-related functions to intel_pm
  drm/i915: fix line breaks in intel_pm
  drm/i915: move watermarks settings into intel_pm module
  drm/i915: move fbc-related functionality into intel_pm module
  drm/i915: Refactor get_fence() to use the common fence writing routine
  drm/i915: Refactor fence clearing to use the common fence writing routine
  drm/i915: Refactor put_fence() to use the common fence writing routine
  drm/i915: Prepare to consolidate fence writing
  drm/i915: Remove the unsightly "optimisation" from flush_fence()
  drm/i915: Simplify fence finding
  drm/i915: Discard the unused obj->last_fenced_ring
  drm/i915: Remove unused ring->setup_seqno
  drm/i915: Remove fence pipelining
  ...
2012-05-02 09:22:29 +01:00
Nicolas Ferre
028fdd87b7 hwrng: Kconfig - modify default state for atmel-rng driver
In order to prevent building the Atmel hw_random driver for each and every
configuration, add a "default" Kconfig state in relation with
CONFIG_ARCH_AT91.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-04-30 20:00:35 +10:00
Julia Lawall
945478a727 hwrng: omap - use devm_request_and_ioremap
Using devm_request_and_ioremap is more concise.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-04-27 11:28:29 +10:00
Daniel Borkmann
1790625feb xilinx_hwicap: reset XHI_MAX_RETRIES
Reset the XHI_MAX_RETRIES value. This allows the hardware enough time to
write configuration frames during partial reconfiguration. In case of 10
the driver returns an error, although it should just have polled the
register longer.

Tested on an ML605 board. The patch is against the latest linus-tree.

Signed-off-by: Ariane Keller <ariane.keller@tik.ee.ethz.ch>
Signed-off-by: Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-19 19:09:18 -07:00
Daniel Borkmann
73eb94a094 xilinx_hwicap: add support for virtex6 FPGAs
This patch adds support for the virtex6 FPGA to the xilinx_hwicap driver.

Tested on a Xilinx ML605 board. The patch is against the latest linus-tree.

Signed-off-by: Ariane Keller <ariane.keller@tik.ee.ethz.ch>
Signed-off-by: Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-19 19:09:18 -07:00
Daniel Vetter
767878908e Linux 3.4-rc3
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEbBAABAgAGBQJPi3XOAAoJEHm+PkMAQRiGnsUH9RjHwH4YFVyuP/DKtKa6zs74
 wqkpT15yITQ5WWMog4JaJFFg5rJCUd8QZr7AS/HSn0ijDyZX5VU7Rcs9cMudDzNR
 H/5K/AscS4fjb0HwWVqoltTWHRb9QGSwVN3+E3VCDLt9P89YJ0o3QztkkuEX5dkZ
 jc7reVXTfRnCcILEa9jleOzrn+OLM3j/jAjQ2hGunl8EDLzD4b17HHPoli4jEZ/5
 5ibpSVsPD+AqzN+glbXvYjVItl12D0IQos/JdOwfuZriCVWLxysSSwHZTbPCyvBZ
 LHH4HR5T+XLSXbjJeNkUFHLzqU+d5gVRadIoWtJCxqxFjKbOs2YtzJ5Ai0nDiw==
 =kTkC
 -----END PGP SIGNATURE-----

Merge tag 'v3.4-rc3' into drm-intel-next-queued

Backmerge Linux 3.4-rc3 into drm-intel-next to resolve a few things
that conflict/depend upon patches in -rc3:
- Second part of the Sandybridge workaround series - it changes some
  of the same registers.
- Preparation for Chris Wilson's fencing cleanup - we need the fix
  from -rc3 merged before we can move around all that code.
- Resolve the gmbus conflict - gmbus has been disabled in 3.4 again,
  but should be enabled on all generations in 3.5.

Conflicts:
	drivers/gpu/drm/i915/intel_i2c.c

Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-17 11:16:20 +02:00
Nicolas Ferre
1234f4bada hwrng: Kconfig: remove dependency for atmel-rng driver
This will allow to select this driver for newer SoCs. Make sure to
keep dependency on HAVE_CLK to avoid breaking other machines.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-04-16 12:47:18 +02:00
Linus Torvalds
f4f9c1ac78 tty and serial fixes for 3.4-rc2
Here are some tty and serial fixes for 3.4-rc2.
 
 Most important here is the pl011 fix, which has been reported by about
 100 different people, which means more people use it than I expected :)
 
 There are also some 8250 driver reverts due to some problems reported by
 them.  And other minor fixes as well.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk+HVDgACgkQMUfUDdst+ymKngCbBIqGrmq5PiDEV7JnkpLRcCEy
 DQoAn1XH+Y4NR0Wu121AkJ7UwE8CiXSg
 =h7iL
 -----END PGP SIGNATURE-----

Merge tag 'tty-3.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty and serial fixes from Greg KH:
 "Here are some tty and serial fixes for 3.4-rc2.

  Most important here is the pl011 fix, which has been reported by about
  100 different people, which means more people use it than I expected
  :)

  There are also some 8250 driver reverts due to some problems reported
  by them.  And other minor fixes as well.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'tty-3.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  pch_uart: Add Kontron COMe-mTT10 uart clock quirk
  pch_uart: Fix MSI setting issue
  serial/8250_pci: add a "force background timer" flag and use it for the "kt" serial port
  Revert "serial/8250_pci: setup-quirk workaround for the kt serial controller"
  Revert "serial/8250_pci: init-quirk msi support for kt serial controller"
  tty/serial/omap: console can only be built-in
  serial: samsung: fix omission initialize ulcon in reset port fn()
  printk(): add KERN_CONT where needed in hpet and vt code
  tty/serial: atmel_serial: fix RS485 half-duplex problem
  tty: serial: altera_uart: Check for NULL platform_data in probe.
  isdn/gigaset: use gig_dbg() for debugging output
  omap-serial: Fix the error handling in the omap_serial probe
  serial: PL011: move interrupt clearing
2012-04-12 15:36:33 -07:00
Mathieu Desnoyers
44e4360fa3 drivers/char/random.c: fix boot id uniqueness race
/proc/sys/kernel/random/boot_id can be read concurrently by userspace
processes.  If two (or more) user-space processes concurrently read
boot_id when sysctl_bootid is not yet assigned, a race can occur making
boot_id differ between the reads.  Because the whole point of the boot id
is to be unique across a kernel execution, fix this by protecting this
operation with a spinlock.

Given that this operation is not frequently used, hitting the spinlock
on each call should not be an issue.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-12 13:12:12 -07:00
Santosh Nayak
ae85226ebe agp: Use u32 __iomem annotation to silence sparse warning.
Replace "void *" by "u32 __iomem *" to silence sparse warning.

Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-12 17:56:21 +01:00
Santosh Nayak
971ca47178 agp: Remove 'break' after 'return' statement.
'break' is unnecessary after 'return' statement.
Remove all such 'break' as clean up.

Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-12 17:56:17 +01:00
Dave Airlie
effbc4fd8e Merge branch 'drm-intel-next' of git://people.freedesktop.org/~danvet/drm-intel into drm-core-next
Daniel Vetter wrote
First pull request for 3.5-next, slightly large than usual because new
things kept coming in since the last pull for 3.4.
Highlights:
- first batch of hw enablement for vlv (Jesse et al) and hsw (Eugeni). pci
 ids are not yet added, and there's still quite a few patches to merge
 (mostly modesetting). To make QA easier I've decided to merge this stuff
 in pieces.
- loads of cleanups and prep patches spurred by the above. Especially vlv
 is a real frankenstein chip, but also hsw is stretching our driver's
 code design. Expect more to come in this area for 3.5.
- more gmbus fixes, cleanups and improvements by Daniel Kurtz. Again,
 there are more patches needed (and some already queued up), but I wanted
 to split this a bit for better testing.
- pwrite/pread rework and retuning. This series has been in the works for
 a few months already and a lot of i-g-t tests have been created for it.
 Now it's finally ready to be merged.  Note that one patch in this series
 touches include/pagemap.h, that patch is acked-by akpm.
- reduce mappable pressure and relocation throughput improvements from
 Chris.
- mmap offset exhaustion mitigation by Chris Wilson.
- a start at figuring out which codepaths in our messy dri1/ums+gem/kms
 driver we actually need to support by bailing out of unsupported case.
 The driver now refuses to load without kms on gen6+ and disallows a few
 ioctls that userspace never used in certain cases. More of this will
 definitely come.
- More decoupling of global gtt and ppgtt.
- Improved dual-link lvds detection by Takashi Iwai.
- Shut up the compiler + plus fix the fallout (Ben)
- Inverted panel brightness handling (mostly Acer manages to break things
 in this way).
- Small fixlets and adjustements and some minor things to help debugging.

Regression-wise QA reported quite a few issues on ivb, but all of them
turned out to be hw stability issues which are already fixed in
drm-intel-fixes (QA runs the nightly regression tests on -next alone,
without -fixes automatically merged in). There's still one issue open on
snb, it looks like occlusion query writes are not quite as cache coherent
as we've expected. With some of the pwrite adjustements we can now
reliably hit this. Kernel workaround for it is in the works."

* 'drm-intel-next' of git://people.freedesktop.org/~danvet/drm-intel: (101 commits)
  drm/i915: VCS is not the last ring
  drm/i915: Add a dual link lvds quirk for MacBook Pro 8,2
  drm/i915: make quirks more verbose
  drm/i915: dump the DMA fetch addr register on pre-gen6
  drm/i915/sdvo: Include YRPB as an additional TV output type
  drm/i915: disallow gem init ioctl on ilk
  drm/i915: refuse to load on gen6+ without kms
  drm/i915: extract gt interrupt handler
  drm/i915: use render gen to switch ring irq functions
  drm/i915: rip out old HWSTAM missed irq WA for vlv
  drm/i915: open code gen6+ ring irqs
  drm/i915: ring irq cleanups
  drm/i915: add SFUSE_STRAP registers for digital port detection
  drm/i915: add WM_LINETIME registers
  drm/i915: add WRPLL clocks
  drm/i915: add LCPLL control registers
  drm/i915: add SSC offsets for SBI access
  drm/i915: add port clock selection support for HSW
  drm/i915: add S PLL control
  drm/i915: add PIXCLK_GATE register
  ...

Conflicts:
	drivers/char/agp/intel-agp.h
	drivers/char/agp/intel-gtt.c
	drivers/gpu/drm/i915/i915_debugfs.c
2012-04-12 10:27:01 +01:00
Kay Sievers
5da527aafe printk(): add KERN_CONT where needed in hpet and vt code
A prototype for kmsg records instead of a byte-stream buffer revealed
a couple of missing printk(KERN_CONT ...) uses. Subsequent calls produce
one record per printk() call, while all should have ended up in a single
record.

Instead of:
  ACPI: (supports S0 S5)
  ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
  hpet0: at MMIO 0xfed00000, IRQs 2 , 8 , 0

It prints:
  ACPI: (supports S0
   S5
  )
  ACPI: PCI Interrupt Link [LNKA] (IRQs
   5
   *10
   11
  )
  hpet0: at MMIO 0xfed00000, IRQs
   2
  , 8
  , 0

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09 10:30:39 -07:00
Eugeni Dodonov
4cae9ae052 drm/i915: add Haswell devices and their PCI IDs
This adds product definitions for desktop, mobile and server boards.

v2: split into a separate patch, add .has_pch_split feature.

Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-09 18:03:58 +02:00
Linus Torvalds
4157368edb Merge branch 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Pull arch/tile bug fixes from Chris Metcalf:
 "This includes Paul Gortmaker's change to fix the <asm/system.h>
  disintegration issues on tile, a fix to unbreak the tilepro ethernet
  driver, and a backlog of bugfix-only changes from internal Tilera
  development over the last few months.

  They have all been to LKML and on linux-next for the last few days.
  The EDAC change to MAINTAINERS is an oddity but discussion on the
  linux-edac list suggested I ask you to pull that change through my
  tree since they don't have a tree to pull edac changes from at the
  moment."

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (39 commits)
  drivers/net/ethernet/tile: fix netdev_alloc_skb() bombing
  MAINTAINERS: update EDAC information
  tilepro ethernet driver: fix a few minor issues
  tile-srom.c driver: minor code cleanup
  edac: say "TILEGx" not "TILEPro" for the tilegx edac driver
  arch/tile: avoid accidentally unmasking NMI-type interrupt accidentally
  arch/tile: remove bogus performance optimization
  arch/tile: return SIGBUS for addresses that are unaligned AND invalid
  arch/tile: fix finv_buffer_remote() for tilegx
  arch/tile: use atomic exchange in arch_write_unlock()
  arch/tile: stop mentioning the "kvm" subdirectory
  arch/tile: export the page_home() function.
  arch/tile: fix pointer cast in cacheflush.c
  arch/tile: fix single-stepping over swint1 instructions on tilegx
  arch/tile: implement panic_smp_self_stop()
  arch/tile: add "nop" after "nap" to help GX idle power draw
  arch/tile: use proper memparse() for "maxmem" options
  arch/tile: fix up locking in pgtable.c slightly
  arch/tile: don't leak kernel memory when we unload modules
  arch/tile: fix bug in delay_backoff()
  ...
2012-04-06 17:56:20 -07:00
Linus Torvalds
fb9d78aca7 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/apm
Pull an APM fix from Jiri Kosina:
 "One deadlock/race fix from Niel that got introduced when we were
  moving away from freezer_*_count() to wait_event_freezable()."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/apm:
  APM: fix deadlock in APM_IOC_SUSPEND ioctl
2012-04-05 17:34:30 -07:00
Linus Torvalds
5d32c88f0b Merge branch 'akpm' (Andrew's patch-bomb)
Merge batch of fixes from Andrew Morton:
 "The simple_open() cleanup was held back while I wanted for laggards to
  merge things.

  I still need to send a few checkpoint/restore patches.  I've been
  wobbly about merging them because I'm wobbly about the overall
  prospects for success of the project.  But after speaking with Pavel
  at the LSF conference, it sounds like they're further toward
  completion than I feared - apparently davem is at the "has stopped
  complaining" stage regarding the net changes.  So I need to go back
  and re-review those patchs and their (lengthy) discussion."

* emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches)
  memcg swap: use mem_cgroup_uncharge_swap fix
  backlight: add driver for DA9052/53 PMIC v1
  C6X: use set_current_blocked() and block_sigmask()
  MAINTAINERS: add entry for sparse checker
  MAINTAINERS: fix REMOTEPROC F: typo
  alpha: use set_current_blocked() and block_sigmask()
  simple_open: automatically convert to simple_open()
  scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open()
  libfs: add simple_open()
  hugetlbfs: remove unregister_filesystem() when initializing module
  drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback
  fs/xattr.c:setxattr(): improve handling of allocation failures
  fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed
  fs/xattr.c: suppress page allocation failure warnings from sys_listxattr()
  sysrq: use SEND_SIG_FORCED instead of force_sig()
  proc: fix mount -t proc -o AAA
2012-04-05 15:30:34 -07:00
Stephen Boyd
234e340582 simple_open: automatically convert to simple_open()
Many users of debugfs copy the implementation of default_open() when
they want to support a custom read/write function op.  This leads to a
proliferation of the default_open() implementation across the entire
tree.

Now that the common implementation has been consolidated into libfs we
can replace all the users of this function with simple_open().

This replacement was done with the following semantic patch:

<smpl>
@ open @
identifier open_f != simple_open;
identifier i, f;
@@
-int open_f(struct inode *i, struct file *f)
-{
(
-if (i->i_private)
-f->private_data = i->i_private;
|
-f->private_data = i->i_private;
)
-return 0;
-}

@ has_open depends on open @
identifier fops;
identifier open.open_f;
@@
struct file_operations fops = {
...
-.open = open_f,
+.open = simple_open,
...
};
</smpl>

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-05 15:25:50 -07:00
NeilBrown
f283d22713 APM: fix deadlock in APM_IOC_SUSPEND ioctl
I found the Xorg server on my ARM device stuck in the 'msleep()' loop
in apm_ioctl.

I suspect it had attempted suspend immediately after resuming and lost
a race.
During that msleep(10);, a new suspend cycle must have started and
changed ->suspend_state to SUSPEND_PENDING, so it was never seen to
be SUSPEND_DONE and the loop could never exited.  It would have moved on
to SUSPEND_ACKTO but never been able to reach SUSPEND_DONE.

So change the loop to only run while SUSPEND_ACKED rather than until
SUSPEND_DONE.  This is much safer.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-03 03:42:36 +02:00
Chris Metcalf
16418bb1da tile-srom.c driver: minor code cleanup
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:14:10 -04:00
Daniel Vetter
650dc07ec3 drm/i915: disable ppgtt on snb when dmar is enabled
Totally unexpected that this regressed. Luckily it sounds like we just
need to have dmar disable on the igfx, not the entire system. At least
that's what a few days of testing between Tony Vroon and me indicates.

Reported-by: Tony Vroon <tony@linx.net>
Cc: Tony Vroon <tony@linx.net>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43024
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-02 15:59:07 +02:00
Eugeni Dodonov
cc22a938fc drm/i915: add Ivy Bridge GT2 Server entries
This adds PCI ID for IVB GT2 server variant which we were missing.

Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
[danvet: fix up conflict because the patch has been diffed against next. tsk.]
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-02 15:58:47 +02:00
Linus Torvalds
a591afc01d Merge branch 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x32 support for x86-64 from Ingo Molnar:
 "This tree introduces the X32 binary format and execution mode for x86:
  32-bit data space binaries using 64-bit instructions and 64-bit kernel
  syscalls.

  This allows applications whose working set fits into a 32 bits address
  space to make use of 64-bit instructions while using a 32-bit address
  space with shorter pointers, more compressed data structures, etc."

Fix up trivial context conflicts in arch/x86/{Kconfig,vdso/vma.c}

* 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
  x32: Fix alignment fail in struct compat_siginfo
  x32: Fix stupid ia32/x32 inversion in the siginfo format
  x32: Add ptrace for x32
  x32: Switch to a 64-bit clock_t
  x32: Provide separate is_ia32_task() and is_x32_task() predicates
  x86, mtrr: Use explicit sizing and padding for the 64-bit ioctls
  x86/x32: Fix the binutils auto-detect
  x32: Warn and disable rather than error if binutils too old
  x32: Only clear TIF_X32 flag once
  x32: Make sure TS_COMPAT is cleared for x32 tasks
  fs: Remove missed ->fds_bits from cessation use of fd_set structs internally
  fs: Fix close_on_exec pointer in alloc_fdtable
  x32: Drop non-__vdso weak symbols from the x32 VDSO
  x32: Fix coding style violations in the x32 VDSO code
  x32: Add x32 VDSO support
  x32: Allow x32 to be configured
  x32: If configured, add x32 system calls to system call tables
  x32: Handle process creation
  x32: Signal-related system calls
  x86: Add #ifdef CONFIG_COMPAT to <asm/sys_ia32.h>
  ...
2012-03-29 18:12:23 -07:00
Linus Torvalds
532bfc851a Merge branch 'akpm' (Andrew's patch-bomb)
Merge third batch of patches from Andrew Morton:
 - Some MM stragglers
 - core SMP library cleanups (on_each_cpu_mask)
 - Some IPI optimisations
 - kexec
 - kdump
 - IPMI
 - the radix-tree iterator work
 - various other misc bits.

 "That'll do for -rc1.  I still have ~10 patches for 3.4, will send
  those along when they've baked a little more."

* emailed from Andrew Morton <akpm@linux-foundation.org>: (35 commits)
  backlight: fix typo in tosa_lcd.c
  crc32: add help text for the algorithm select option
  mm: move hugepage test examples to tools/testing/selftests/vm
  mm: move slabinfo.c to tools/vm
  mm: move page-types.c from Documentation to tools/vm
  selftests/Makefile: make `run_tests' depend on `all'
  selftests: launch individual selftests from the main Makefile
  radix-tree: use iterators in find_get_pages* functions
  radix-tree: rewrite gang lookup using iterator
  radix-tree: introduce bit-optimized iterator
  fs/proc/namespaces.c: prevent crash when ns_entries[] is empty
  nbd: rename the nbd_device variable from lo to nbd
  pidns: add reboot_pid_ns() to handle the reboot syscall
  sysctl: use bitmap library functions
  ipmi: use locks on watchdog timeout set on reboot
  ipmi: simplify locking
  ipmi: fix message handling during panics
  ipmi: use a tasklet for handling received messages
  ipmi: increase KCS timeouts
  ipmi: decrease the IPMI message transaction time in interrupt mode
  ...
2012-03-28 17:19:28 -07:00
Corey Minyard
423a5bb49e ipmi: use locks on watchdog timeout set on reboot
The IPMI watchdog timer clears or extends the timer on reboot/shutdown.
It was using the non-locking routine for setting the watchdog timer, but
this was causing race conditions.  Instead, use the locking version to
avoid the races.  It seems to work fine.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28 17:14:36 -07:00
Corey Minyard
f60adf42ad ipmi: simplify locking
Now that the the IPMI driver is using a tasklet, we can simplify the
locking in the driver and get rid of the message lock.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28 17:14:36 -07:00
Corey Minyard
895dcfd1ca ipmi: fix message handling during panics
The part of the IPMI driver that delivered panic information to the event
log and extended the watchdog timeout during a panic was not properly
handling the messages.  It used static messages to avoid allocation, but
wasn't properly waiting for these, or wasn't properly handling the
refcounts.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28 17:14:36 -07:00
Corey Minyard
7adf579c8b ipmi: use a tasklet for handling received messages
The IPMI driver would release a lock, deliver a message, then relock.
This is obviously ugly, and this patch converts the message handler
interface to use a tasklet to schedule work.  This lets the receive
handler be called from an interrupt handler with interrupts enabled.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28 17:14:36 -07:00