Commit graph

26 commits

Author SHA1 Message Date
Roy Zang
2602a21231 powerpc/85xx: Add basic P1023RDS board support
The P1023 processor is an e500v2 based SoC that utilizes the DPAA
networking architecture.  This adds basic board support for non-DPAA
functionality (device tree, board file, etc).

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-22 21:44:56 -05:00
Scott Wood
b637cf7bf8 powerpc/fsl: enable verbose bug output
This debug option has no overhead other than a slight increase in
kernel size, and makes bug reports more useful.  While some end users
may prefer to save the space, as a default on a kernel config aimed
primarily at development on reference boards, it should be enabled.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-19 01:14:30 -05:00
Stephen Rothwell
ff56535d29 powerpc: Restore some misc devices to our configs
Uwe Kleine-König reported:

	while working on an defconfig (arm/mx27) I noticed that just updating
	it[1] results in removing CONFIG_EEPROM_AT24=y.  The reason is that
	since commit

		v2.6.36-5965-g5f2365d (misc devices: do not enable by default)

	MISC_DEVICES isn't enabled anymore by default.  So all defconfigs that
	have CONFIG_SOME_SYMBOL=y (or =m) (with SOME_SYMBOL depending on
	MISC_DEVICES) but not CONFIG_MISC_DEVICES=y suffer from the same
	problem.

This restores those misc devices to the powerpc defconfigs.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Uwe Kleine-König
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-30 10:36:23 +11:00
David Rientjes
6a108a14fa kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.

This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel.  A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).

Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.

Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 17:02:05 -08:00
Timur Tabi
2c184cd393 powerpc/85xx: add DIU support to the Freecale P1022DS reference board
The Freescale P1022DS has an on-chip video controller called the DIU, and a
driver for this device already exists.  Update the platform file for the
P1022DS reference board to enable the driver, and update the defconfig for
Freescale MPC85xx boards to add the driver.

[Edited to resolve header add/add conflict and drop #define DEBUG.
-- broonie]

Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-14 21:46:27 +01:00
Benjamin Herrenschmidt
61a3e1665f powerpc: Trim defconfigs
This trims all our defconfigs using make savedefconfig

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-09 11:19:16 +10:00
Timur Tabi
30be4c965c powerpc/85xx: Introduce support for the Freescale P1022DS reference board
Introduce basic support for the Freescale P1022DS reference board, based on the
Freescale BSP for this board.  This patch excludes the DIU, SSI, and MMC/SD
drivers.  Only a 36-bit DTS is provided.

Update mpc86xx_smp_defconfig and mpc85xx_defconfig to support the P1022DS.
This means enabling 64-bit physical address support, increasing the maximum
zone order to 12 (to allow the DIU driver to allocate large chunks), and
clean up the audio options to disable the deprecated OSS support.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-04 14:22:52 -05:00
Kumar Gala
b4d0a038e0 powerpc: 2.6.34 update of defconfigs for embedded 6xx/7xxx, 8xx, 8xxx
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-19 23:17:27 -05:00
Kim Phillips
e3c8a02743 powerpc/mpc8xxx defconfigs - turn off SYSFS_DEPRECATED
a recent fc11 udev update on an 83xx board made root console login
disappear:

  Updating       : udev-141-8.fc11.ppc                                    32/83
udev: starting version 141
udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED;
	some udev features will not work correctly

and sure enough, turning off SYSFS_DEPRECATED brings the login prompt back.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-19 23:15:06 -05:00
Kumar Gala
1e65346b3b powerpc: 2.6.33 update of defconfigs for embedded 6xx/7xxx, 8xx, 8xxx
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-06 09:27:07 -06:00
Kumar Gala
e9bcf1418c powerpc: 2.6.32 update of defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxx
Updated mpc85xx_{smp_}defconfig to enable:
* XES_MPC85xx board
* PCI MSI
* RapidIO

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-05 08:26:38 -06:00
Kim Phillips
114785a619 powerpc/8xxx: enable IPsec ESP by default on mpc83xx/mpc85xx
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-05 08:19:25 -06:00
Poonam Aggrwal
fb8e3e1fe1 powerpc/85xx: Add support for P2020RDB board
Add support for the P2020RDB reference board from Freescale.

Overview of P2020RDB platform
	- DDR
	  DDR2 1G
	- NOR Flash
	  16MByte
	- NAND Flash
	  32MByte
	- 3 Ethernet interfaces
	  1) etSEC1
		- RGMII
		- connected to a 5 port Vitesse Switch(VSC7385)
		- Switch is memory mapped through eLBC interface(CS#2)
		- IRQ1
	  2) etSEC2
		- SGMII
		- connected to VSC8221
		- IRQ2
	  3) etSEC3
		- RGMII
		- connected to VSC8641
		- IRQ3
	- 2 1X PCIe interfaces
	- SD/MMC ,USB
	- SPI EEPROM
	- Serial I2C EEPROM

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-24 20:48:06 -05:00
Kumar Gala
34466c5be4 powerpc: Update defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxx
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-29 23:34:01 -05:00
Kumar Gala
8db3dca86e powerpc/85xx: Enabled a bunch of FSL specific drivers/options
* Add new 85xx boards
* Added QE/FSL gpio
* Enabled PHY drivers that exist on various boards
* Enabled FS_ENET & UCC ethernet drivers (CPM2 & QE)
* FSL HW Crypto Engine
* CPM I2C
* QE Serial

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-21 16:08:56 -05:00
Kumar Gala
778544e598 powerpc/85xx: Updated generic mpc85xx_defconfig
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-21 16:08:52 -05:00
Benjamin Herrenschmidt
0411648e44 Merge commit 'kumar/kumar-merge' into merge 2009-01-28 17:14:54 +11:00
Kumar Gala
993ac6b762 powerpc/85xx: Update defconfigs
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-26 19:59:55 -06:00
Jean Delvare
dd7f8dbe2b eeprom: More consistent symbol names
Now that all EEPROM drivers live in the same place, let's harmonize
their symbol names.

Also fix eeprom's dependencies, it definitely needs sysfs, and is no
longer experimental after many years in the kernel tree.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
2009-01-26 21:19:57 +01:00
Kumar Gala
ea37194d68 powerpc: Updated Freescale PPC related defconfigs
unset CONFIG_PCI_LEGACY in the defconfigs as none of them enable
ISDN drivers which seem to be the only place we are using pci_find_device

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-11-08 12:40:54 -06:00
Kumar Gala
2bb2e1db90 powerpc: Update defconfigs for FSL PPC boards
Since we are updated defconfigs I went ahead and moved the
asp8347_defconfig under 83xx/ and the mpc8536_ds_defconfig under
85xx/ as that is where they should have been to start with.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-21 07:23:03 -05:00
Timur Tabi
ac8a101480 powerpc: fix ALSA options in Freescale 85xx and 86xx defconfigs
The defconfigs for Freescale 85xx and 86xx SOCs had bad choices for some
audio related options.  In particular, OSS emulation should be enabled,
and the old ALSA API should be disabled.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16 17:59:48 -05:00
Kumar Gala
70b3ec3e52 [POWERPC] Updated Freescale PPC defconfigs
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-09 09:12:22 -05:00
Kumar Gala
1e85d89fa3 [POWERPC] Fix defconfigs so we dont set both GENRTC and RTCLIB
The new rtc subsystem conflicts with genrtc so don't enable GENRTC
if RTCLIB is enabled.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-31 11:53:46 -05:00
Kumar Gala
eff2f1ec37 [POWERPC] Update some defconfigs
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-24 08:56:06 -05:00
Kumar Gala
3a83156bd8 [POWERPC] 85xx: rework platform Kconfig
* Allow multiple boards to be selected in a single build
* Removed Kconfig option '85xx' which existed only for compat with arch/ppc
* Added a multiplatform 85xx defconfig (mpc85xx_defconfig). This builds
  all 85xx boards except sbc8560 and stx_gp3 since these to boards have
  board specific ifdef in driver code that may break all other boards

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 13:13:12 -06:00