Many years ago when this driver was written, it had a use, but these
days it's nothing but trouble and distributions should not enable it
in any situation.
Pretty much every console device a sparc machine could see has a
bonafide real driver, making the PROM console hack unnecessary.
If any new device shows up, we should write a driver instead of
depending upon this crutch to save us. We've been able to take care
of this even when no chip documentation exists (sunxvr500, sunxvr2500)
so there are no excuses.
Signed-off-by: David S. Miller <davem@davemloft.net>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (46 commits)
powerpc64: convert to dynamic percpu allocator
sparc64: use embedding percpu first chunk allocator
percpu: kill lpage first chunk allocator
x86,percpu: use embedding for 64bit NUMA and page for 32bit NUMA
percpu: update embedding first chunk allocator to handle sparse units
percpu: use group information to allocate vmap areas sparsely
vmalloc: implement pcpu_get_vm_areas()
vmalloc: separate out insert_vmalloc_vm()
percpu: add chunk->base_addr
percpu: add pcpu_unit_offsets[]
percpu: introduce pcpu_alloc_info and pcpu_group_info
percpu: move pcpu_lpage_build_unit_map() and pcpul_lpage_dump_cfg() upward
percpu: add @align to pcpu_fc_alloc_fn_t
percpu: make @dyn_size mandatory for pcpu_setup_first_chunk()
percpu: drop @static_size from first chunk allocators
percpu: generalize first chunk allocator selection
percpu: build first chunk allocators selectively
percpu: rename 4k first chunk allocator to page
percpu: improve boot messages
percpu: fix pcpu_reclaim() locking
...
Fix trivial conflict as by Tejun Heo in kernel/sched.c
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig:
kconfig: add missing dependency of conf to localyesconfig
kconfig: test if a .config already exists
kconfig: make local .config default for streamline_config
kconfig: test for /boot/config-uname after /proc/config.gz in localconfig
kconfig: unset IKCONFIG_PROC and clean up nesting
kconfig: search for a config to base the local(mod|yes)config on
kconfig: keep config.gz around even if CONFIG_IKCONFIG_PROC is not set
kconfig: have extract-ikconfig read ELF files
kconfig: add check if end exists in extract-ikconfig
kconfig: enable CONFIG_IKCONFIG from streamline_config.pl
kconfig: do not warn about modules built in
kconfig: streamline_config.pl do not stop with no depends
kconfig: add make localyesconfig option
kconfig: make localmodconfig to run streamline_config.pl
kconfig: add streamline_config.pl to scripts
There's a dependency missing.
$ make localyesconfig
HOSTCC scripts/basic/fixdep
HOSTCC scripts/basic/docproc
HOSTCC scripts/basic/hash
using config: '/boot/config-2.6.27.25-78.2.56.fc9.x86_64'
/bin/sh: line 8: scripts/kconfig/conf: No such file or directory
make[1]: *** [localyesconfig] Error 127
make: *** [localyesconfig] Error 2
Thus the script failed to run. But the sed command that converts the '=m'
to '=y' still ran. This gives us a distro config with all modules
converted to built in!
The missing dependency was for conf for localyesconfig. This
dependency was already set for localmodconfig.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If one were to run localmodconfig or localyesconfig without having
a .config already in the file, then the end of the process would give
a warning when it tries to move the old .config to .config.old.
This patch adds a test to check if .config exists and avoid the moves
if it does not.
[ Impact: remove warning after make localmodconfig ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As Andi Kleen pointed out, most people would expect that the local .config
file to be based for a streamline config. This patch changes the order
of searching for a config file to consider the .config in the local
directory first.
Reported-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Many distros put their config in /boot/config-`uname -r`, add a check
for that right after /proc/config.gz
Reported-by: Alan Jenkins <sourcejedi.lkml@googlemail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Due to cut and paste error IKCONFIG was both set and cleared.
It was suppose to be IKCONFIG_PROC to be cleared.
Also cleaned up if nesting.
Reported-by: Alan Jenkins <sourcejedi.lkml@googlemail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Instead of using the .config in the local directory. This patch
changes streamline_config.pl to search various locations for a config.
Here's the list and order of search:
/proc/config.gz
/boot/vmlinuz-`uname -r`
vmlinux # local to the directory
/lib/modules/`uname -r`/kernel/kernel/configs.ko
kernel/configs.ko
kernel/configs.o
.config
Once it finds a file that contains a config (it checks if the binary
objects have configs first) it then uses it to create the .config
with minimum modules needed.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
It would be nice to use extract-ikconfig to find the congfig.gz
in either vmlinux (not vmlinuz) or configs.ko.
This patch changes the script to also be able to read ELF files directly.
[ Impact: find config.gz in vmlinux and configs.ko ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Ingo Molnar suggested that the streamline_config.pl should enable
CONFIG_IKCONFIG to keep the current config in the kernel.
Then we can use scripts/extract-ikconfig to find the current
modules.
This patch changes streamline_config.pl to check if CONFIG_IKCONFIG
is not set, and if it is not, it enables it to be a module.
[ Impact: make current config options easier to find ]
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The streamline_config.pl finds all the configs that are needed to
compile the currently loaded modules. After it creates the .config
file, it tests to make sure all the configs that are needed were
set.
It only looks at the configs that are modules, it does not look
at the builtin configs. This causes unnecessary warnings about modules
not being covered.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If a config does not have a prompt, it must be selected.
streamline_config.pl keeps track of all configs that select other configs.
If a config that does not have a prompt needs to be set to enable a
current module, it will include all configs that select it.
Note, streamline_config.pl does not enable modules that are not already
enabled. It only keeps enabled those that were enabled and might be
needed to compile the current modules.
The code to find the selects of a config is after the code that
adds the depends. But if a config needed selects but had no dependencies,
it would not be set. Because the code would stop before getting to
the select.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This adds the option localyesconfig to make. This is similar to
localmodconfig, but after it removes unnecessary modules it runs
sed -i s/=m/=y/
on the .config file. It then runs "make silentoldconfig" to fix any
wholes that were created by the conversion of modules to core.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Running the streamline_config.pl script manually can still be confusing
for some users. This patch adds the localmodconfig option. This will
automatically run streamline_config.pl on the current .config and
then run "make silentoldconfig" to fix any wholes that might have been
created.
$ make localmodconfig
This will remove any module configurations in .config that are not needed
to compile the modules that are loaded.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
streamline_config.pl is a very powerful tool. For those that install
a kernel to a new box using the config file from the distribution know that
it can take forever to compile the kernel.
Making a custom config file that will still boot your box, but bring
down the compile time of the kernel can be quit painful, and to ask
someone that reported a bug to do this can be a large burdon since that
person may not even know how to build a kernel.
This script will perform "lsmod" to find all the modules loaded on the
current running system. It will read all the Makefiles to map which
CONFIG enables a module. It will read the Kconfig files to find the
dependencies and selects that may be needed to support a CONFIG.
Finally, it reads the .config file and removes any module "=m" that is
not needed to enable the currently loaded modules. The output goes to
standard out.
Here's a way to run the script. From the Linux directory that holds
a distribution .config.
$ scripts/kconfig/streamline_config.pl arch/x86/Kconfig > config-sl
$ mv .config config-save
$ mv config-sl .config
$ make oldconfig
Now you have a .config that will still build all your modules, but also
take much less time to build the kernel.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Conflicts:
arch/sparc/kernel/smp_64.c
arch/x86/kernel/cpu/perf_counter.c
arch/x86/kernel/setup_percpu.c
drivers/cpufreq/cpufreq_ondemand.c
mm/percpu.c
Conflicts in core and arch percpu codes are mostly from commit
ed78e1e078dd44249f88b1dd8c76dafb39567161 which substituted many
num_possible_cpus() with nr_cpu_ids. As for-next branch has moved all
the first chunk allocators into mm/percpu.c, the changes are moved
from arch code to mm/percpu.c.
Signed-off-by: Tejun Heo <tj@kernel.org>
Merge reason: Merge up to almost-rc6 to pick up latest perfcounters
(on which we'll queue up a dependent fix)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Roland Dreier found that a section that contained only a weak
function in one of the staging drivers and this caused
recordmcount.pl to spit out a warning and fail.
Although it is strange that a driver would have a weak function, and
this function only be used in one place, it should not be something
to make recordmcount.pl fail.
This patch fixes the issue in a simple manner: if only weak
functions exist in a section, then that section will not be
recorded.
Reported-by: Roland Dreier <rdreier@cisco.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On Wed, 5 Aug 2009, Ingo Molnar wrote:
> * Dave Airlie <airlied@gmail.com> wrote:
>
> > Hey,
> >
> > So I spent 3-4 hrs today (I'm stupid yes) tracking down a .o
> > breakage by blaming rawhide gcc/binutils as I was using make
> > V=1and seeing only the compiler chain running,
>
> Hm, is this that powerpc related build bug you just reported?
Well we tracked it down and it is powerpc64 specific.
Seems that in drivers/hwmon/lm93.c there's a function called:
LM93_IN_FROM_REG()
But PPC64 has function descriptors and the real function names (the ones
you see in objdump) start with a '.'. Thus this in objdump you have:
Disassembly of section .text:
0000000000000000 <.LM93_IN_FROM_REG>:
0: 7c 08 02 a6 mflr r0
4: fb 81 ff e0 std r28,-32(r1)
The function name used is .LM93_IN_FROM_REG. But gcc considers symbols
that start with ".L" as a special symbol that is used inside the assembly
stage.
The nm passed into recordmcount uses the --synthetic option which shows
the ".L" symbols (my runs outside of the build did not include the
--synthetic option, so my older patch worked). We see the function as a
local.
Now to capture all the locations that use "mcount" we need to have a
reference to link into the object file a list of mcount callers. We need a
reference that will not disappear. We try to use a global function and if
that does not work, we use a local function as a reference. But to relink
the section back into the object, we need to make it global. In this case,
we run objcopy using --globalize-symbol and --localize-symbol to convert
the symbol into a global symbol, link the mcount list, then convert it
back to a local symbol.
This works great except for this case. .L* symbols can not be converted
into a global symbol, and the mcount section referencing it will remain
unresolved.
Reported-by: Dave Airlie <airlied@gmail.com>
LKML-Reference: <alpine.DEB.2.00.0908052011590.5010@gandalf.stny.rr.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: Fix missing function_graph events when we splice_read from trace_pipe
tracing: Fix invalid function_graph entry
trace: stop tracer in oops_enter()
ftrace: Only update $offset when we update $ref_func
ftrace: Fix the conditional that updates $ref_func
tracing: only truncate ftrace files when O_TRUNC is set
tracing: show proper address for trace-printk format
Allow an option to control the minimum percentage of sign-offs required
before being considered a maintainer.
git-min-percent has a default value of 5
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow an option to control the minimum percentage of sign-offs required
before being considered a maintainer.
git-min-percent has a default value of 5
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Don't require a specific file in a directory to be tested.
Also Arnd Bergmann pointed out that the MAINTAINERS pattern requirement
that directory patterns have a trailing slash was unnecessary and was
likely to be error prone. Removed that requirement.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A 32-bit perl can't handle 64-bit addresses without using the BigInt
package.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The value of $offset should be the offset of $ref_func from the
beginning of the object file. Therefore, we should set both variables
together.
This fixes a bug I was hitting on sh where $offset (which is used to
calcualte the addends for the __mcount_loc entries) was being set
multiple times and didn't correspond to $ref_func's offset in the object
file. The addends in __mcount_loc were calculated incorrectly, resulting
in ftrace dynamically modifying addresses that weren't mcount call
sites.
Signed-off-by: Matt Fleming <matt@console-pimps.org>
LKML-Reference: <1248365775-25196-2-git-send-email-matt@console-pimps.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix the conditional that checks if we already have a $ref_func and that
the new function is weak. The code as previously checking whether either
condition was false, and we really need to only update $ref_func is both
cconditions are false.
Signed-off-by: Matt Fleming <matt@console-pimps.org>
LKML-Reference: <1248365775-25196-1-git-send-email-matt@console-pimps.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
I was reading throught the recordmcount.pl starting comment,
and spotted a tiny discrepancy.
The second example is about my_func not being global, but the
example code has the ".globl my_func" statement just moved.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: rostedt@goodmis.org
LKML-Reference: <1247773468-11594-4-git-send-email-jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This is needed on non ncurses based implementation to get a properly
initialized `stdscr' in main().
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
bash versus dash and posh disagree on expanding $@ within double quotes:
export x="$@"
see http://bugs.debian.org/381091 for details
just use the arglist with $*.
dpkg: error processing linux-image-2.6.31-rc1_2.6.31-rc1-18_i386.deb (--install):
subprocess pre-installation script returned error exit status 2
export: 6: 2.6.31-rc1-18: bad variable name
fixes http://bugzilla.kernel.org/show_bug.cgi?id=13567
seen on Ubuntu as there dash is the default sh,
versus bash on Debian.
Reported-by: Pauli <suokkos@gmail.com>
Cc: Frans Pop <elendil@planet.nl>
Signed-off-by: maximilian attems <max@stro.at>
Acked-By: Andres Salomon <dilinger@collabora.co.uk>
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
kbuild: finally remove the obsolete variable $TOPDIR
gitignore: ignore scripts/ihex2fw
Kbuild: Disable the -Wformat-security gcc flag
gitignore: ignore gcov output files
kbuild: deb-pkg ship changelog
Add new __init_task_data macro to be used in arch init_task.c files.
asm-generic/vmlinux.lds.h: shuffle INIT_TASK* macro names in vmlinux.lds.h
Add new macros for page-aligned data and bss sections.
asm-generic/vmlinux.lds.h: Fix up RW_DATA_SECTION definition.
Pull linus#master to merge PER_CPU_DEF_ATTRIBUTES and alpha build fix
changes. As alpha in percpu tree uses 'weak' attribute instead of
inline assembly, there's no need for __used attribute.
Conflicts:
arch/alpha/include/asm/percpu.h
arch/mn10300/kernel/vmlinux.lds.S
include/linux/percpu-defs.h
Somehow I managed to generate a diff that put these 2 lines
into the wrong function: should have been in dump_struct()
instead of in dump_enum().
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When building with a 4.1.x compiler on powerpc64 (at least) we get this
error:
drivers/video/logo/logo_linux_mono.c:81: error: logo_linux_mono causes a section type conflict
This was introduced by commit ae52bb2384
("fbdev: move logo externs to header file"). This is a partial revert of
that commit sufficient to not hit the compiler bug.
Also convert _clut arrays from __initconst to __initdata.
Sam said:
Al analysed this some time ago. When we say something is const then
_sometimes_ gcc annotate the section as const(?) - sometimes not. So if
we have two variables/functions annotated __*const and gcc decides to
annotate the section const only in one case we get a section type
conflict.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
scripts/ihex2fw is a generated binary and should be ignored
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
In the series for 2.6.31 it was noticed to ship the copyright,
but the generated changelog got lost somehow.
As bonus the generated linux-image deb packages are Lenny lintian clean.
Cc: Frans Pop <elendil@planet.nl>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Have git ignore generated files from dtc compile
Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
x86 throws away .discard section but no other archs do. Also,
.discard is not thrown away while linking modules. Make every arch
and module linking throw it away. This will be used to define dummy
variables for percpu declarations and definitions.
This patch is based on Ivan Kokshaysky's alpha percpu patch.
[ Impact: always throw away everything in .discard ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
Fix function actual parameter vs. kernel-doc description matching
so that a warning is not printed when it should not be:
Warning(include/linux/etherdevice.h:199): Excess function parameter 'addr' description in 'is_etherdev_addr'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Teach kernel-doc to ignore kmemcheck_bitfield_{begin,end} sugar
so that it won't generate warnings like this:
Warning(include/net/sock.h:297): No description found for parameter 'kmemcheck_bitfield_begin(flags)'
Warning(include/net/sock.h:297): No description found for parameter 'kmemcheck_bitfield_end(flags)'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The previous commit (17b1f0de) introduced a slightly broken consolidation
of the memory text range checking.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Fix the following build error when do 'make htmldocs':
DOCPROC Documentation/DocBook/debugobjects.xml
exec /scripts/kernel-doc: No such file or directory
exec /scripts/kernel-doc: No such file or directory
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: WANG Cong <amwang@redhat.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Enable the use of GCC's coverage testing tool gcov [1] with the Linux
kernel. gcov may be useful for:
* debugging (has this code been reached at all?)
* test improvement (how do I change my test to cover these lines?)
* minimizing kernel configurations (do I need this option if the
associated code is never run?)
The profiling patch incorporates the following changes:
* change kbuild to include profiling flags
* provide functions needed by profiling code
* present profiling data as files in debugfs
Note that on some architectures, enabling gcc's profiling option
"-fprofile-arcs" for the entire kernel may trigger compile/link/
run-time problems, some of which are caused by toolchain bugs and
others which require adjustment of architecture code.
For this reason profiling the entire kernel is initially restricted
to those architectures for which it is known to work without changes.
This restriction can be lifted once an architecture has been tested
and found compatible with gcc's profiling. Profiling of single files
or directories is still available on all platforms (see config help
text).
[1] http://gcc.gnu.org/onlinedocs/gcc/Gcov.html
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Li Wei <W.Li@Sun.COM>
Cc: Michael Ellerman <michaele@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* akpm: (182 commits)
fbdev: bf54x-lq043fb: use kzalloc over kmalloc/memset
fbdev: *bfin*: fix __dev{init,exit} markings
fbdev: *bfin*: drop unnecessary calls to memset
fbdev: bfin-t350mcqb-fb: drop unused local variables
fbdev: blackfin has __raw I/O accessors, so use them in fb.h
fbdev: s1d13xxxfb: add accelerated bitblt functions
tcx: use standard fields for framebuffer physical address and length
fbdev: add support for handoff from firmware to hw framebuffers
intelfb: fix a bug when changing video timing
fbdev: use framebuffer_release() for freeing fb_info structures
radeon: P2G2CLK_ALWAYS_ONb tested twice, should 2nd be P2G2CLK_DAC_ALWAYS_ONb?
s3c-fb: CPUFREQ frequency scaling support
s3c-fb: fix resource releasing on error during probing
carminefb: fix possible access beyond end of carmine_modedb[]
acornfb: remove fb_mmap function
mb862xxfb: use CONFIG_OF instead of CONFIG_PPC_OF
mb862xxfb: restrict compliation of platform driver to PPC
Samsung SoC Framebuffer driver: add Alpha Channel support
atmel-lcdc: fix pixclock upper bound detection
offb: use framebuffer_alloc() to allocate fb_info struct
...
Manually fix up conflicts due to kmemcheck in mm/slab.c
Now we have __initconst, we can finally move the external declarations for
the various Linux logo structures to <linux/linux_logo.h>.
James' ack dates back to the previous submission (way to long ago), when the
logos were still __initdata, which caused failures on some platforms with some
toolchain versions.
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: James Simmons <jsimmons@infradead.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fixes git send-email with a cover letter
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
