Hook keywrap source code into Kconfig and Makefile
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch implements the AES key wrapping as specified in
NIST SP800-38F and RFC3394.
The implementation covers key wrapping without padding.
IV handling: The caller does not provide an IV for encryption,
but must obtain the IV after encryption which would serve as the first
semblock in the ciphertext structure defined by SP800-38F. Conversely,
for decryption, the caller must provide the first semiblock of the data
as the IV and the following blocks as ciphertext.
The key wrapping is an authenticated decryption operation. The caller
will receive EBADMSG during decryption if the authentication failed.
Albeit the standards define the key wrapping for AES only, the template
can be used with any other block cipher that has a block size of 16
bytes. During initialization of the template, that condition is checked.
Any cipher not having a block size of 16 bytes will cause the
initialization to fail.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto drivers are supposed to update the IV passed to the crypto
request before calling the completion callback.
Test for the IV value before considering the test as successful.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On sparc, we see unaligned access messages on each modprobe[-r]:
Kernel unaligned access at TPC[6ad9b4] pkcs7_verify [..]
Kernel unaligned access at TPC[6a5484] crypto_shash_finup [..]
Kernel unaligned access at TPC[6a5390] crypto_shash_update [..]
Kernel unaligned access at TPC[10150308] sha1_sparc64_update [..]
Kernel unaligned access at TPC[101501ac] __sha1_sparc64_update [..]
These ware triggered by mod_verify_sig() invocations of pkcs_verify(), and
are are being caused by an unaligned desc at (sha1, digest_size is 0x14)
desc = digest + digest_size;
To fix this, pkcs7_verify needs to make sure that desc is pointing
at an aligned value past the digest_size, and kzalloc appropriately,
taking alignment values into consideration.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The clocksource does not provide clocksource_register() function since
f893598 commit (clocksource: Mostly kill clocksource_register()), so
let's remove unnecessary information about this function from a comment.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Setkey function has been split into set_priv_key and set_pub_key.
Akcipher requests takes sgl for src and dst instead of void *.
Users of the API i.e. two existing RSA implementation and
test mgr code have been updated accordingly.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes the following sparse warnings:
crypto/skcipher.c:94:5:
warning: symbol 'crypto_init_skcipher_ops_blkcipher'
was not declared. Should it be static?
crypto/skcipher.c:185:5:
warning: symbol 'crypto_init_skcipher_ops_ablkcipher'
was not declared. Should it be static?
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
No authenc() ciphers are FIPS approved, nor is ecb(des).
After the end of 2015, ansi_cprng will also be non-approved.
Signed-off-by: John Haxby <john.haxby@oracle.com>
Acked-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch provides the configuration and build support to
include and build the optimized SHA1 and SHA256 update transforms
for the kernel's crypto library.
Originally-by: Chandramouli Narayanan <mouli_7982@yahoo.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
hour, min and sec are unsigned int and they can never be less than zero.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The output buffer in test_ahash_speed will point to an address located
within the tcrypt module image.
This causes problems when trying to DMA map the buffer.
For e.g. on ARM-based LS1021A, a page fault occurs within the
DMA API when trying to access the struct page returned by
virt_to_page(output):
insmod tcrypt.ko mode=403
testing speed of async sha1 (sha1-caam)
test 0 ( 16 byte blocks, 16 bytes per update, 1 updates):
Unable to handle kernel paging request at virtual address f07e9080
pgd = e58d0e00
[f07e9080] *pgd=80000080007003, *pmd=00000000
Internal error: Oops: 206 [#1] SMP THUMB2
Modules linked in: tcrypt(+)
CPU: 1 PID: 1119 Comm: insmod Not tainted 4.2.0-rc1-256134-gbf433416e675 #1
Hardware name: Freescale LS1021A
task: ea063900 ti: e5a34000 task.ti: e5a34000
PC is at dma_cache_maint_page+0x38/0xd0
LR is at __dma_page_cpu_to_dev+0x15/0x64
pc : [<800155a0>] lr : [<8001564d>] psr: 000f0033
sp : e5a35ca0 ip : 8063df00 fp : f07e9080
r10: 00000cd0 r9 : 8063df00 r8 : 805a2f04
r7 : 0017f804 r6 : 00000002 r5 : ee7f9000 r4 : 00000014
r3 : 80612d40 r2 : 01ff0080 r1 : 00000380 r0 : ee7f9000
Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA Thumb Segment user
Control: 70c5387d Table: e58d0e00 DAC: 9b7ede70
Process insmod (pid: 1119, stack limit = 0xe5a34210)
Stack: (0xe5a35ca0 to 0xe5a36000)
[...]
[<800155a0>] (dma_cache_maint_page) from [<8001564d>] (__dma_page_cpu_to_dev+0x15/0x64)
[<8001564d>] (__dma_page_cpu_to_dev) from [<800156eb>] (arm_dma_map_page+0x1f/0x44)
[<800156eb>] (arm_dma_map_page) from [<802935e3>] (ahash_digest+0x35f/0x510)
[<802935e3>] (ahash_digest) from [<7f800d03>] (test_ahash_speed.constprop.6+0x24a/0x4e4 [tcrypt])
[<7f800d03>] (test_ahash_speed.constprop.6 [tcrypt]) from [<7f802fd5>] (do_test+0x1898/0x2058 [tcrypt])
[<7f802fd5>] (do_test [tcrypt]) from [<7f80802f>] (tcrypt_mod_init+0x2e/0x63 [tcrypt])
[<7f80802f>] (tcrypt_mod_init [tcrypt]) from [<80009517>] (do_one_initcall+0xb3/0x134)
[<80009517>] (do_one_initcall) from [<80351ec7>] (do_init_module+0x3b/0x13c)
[<80351ec7>] (do_init_module) from [<8005cc3f>] (load_module+0x97b/0x9dc)
[<8005cc3f>] (load_module) from [<8005cd8d>] (SyS_finit_module+0x35/0x3e)
[<8005cd8d>] (SyS_finit_module) from [<8000d101>] (ret_fast_syscall+0x1/0x4c)
Code: 1aba 0152 eb00 0b02 (5882) 0f92
addr2line -f -i -e vmlinux 800155a0
page_zonenum
include/linux/mm.h:728
page_zone
include/linux/mm.h:881
dma_cache_maint_page
arch/arm/mm/dma-mapping.c:822
Signed-off-by: Horia Geant? <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- The selftest overreads the IV test vector.
- Fix potential infinite loop in sunxi-ss driver.
- Fix powerpc build failure when VMX is set without VSX"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: testmgr - don't copy from source IV too much
crypto: sunxi-ss - Fix a possible driver hang with ciphers
crypto: vmx - VMX crypto should depend on CONFIG_VSX
While the destination buffer 'iv' is MAX_IVLEN size,
the source 'template[i].iv' could be smaller, thus
memcpy may read read invalid memory.
Use crypto_skcipher_ivsize() to get real ivsize
and pass it to memcpy.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull security subsystem updates from James Morris:
"Highlights:
- PKCS#7 support added to support signed kexec, also utilized for
module signing. See comments in 3f1e1bea.
** NOTE: this requires linking against the OpenSSL library, which
must be installed, e.g. the openssl-devel on Fedora **
- Smack
- add IPv6 host labeling; ignore labels on kernel threads
- support smack labeling mounts which use binary mount data
- SELinux:
- add ioctl whitelisting (see
http://kernsec.org/files/lss2015/vanderstoep.pdf)
- fix mprotect PROT_EXEC regression caused by mm change
- Seccomp:
- add ptrace options for suspend/resume"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (57 commits)
PKCS#7: Add OIDs for sha224, sha284 and sha512 hash algos and use them
Documentation/Changes: Now need OpenSSL devel packages for module signing
scripts: add extract-cert and sign-file to .gitignore
modsign: Handle signing key in source tree
modsign: Use if_changed rule for extracting cert from module signing key
Move certificate handling to its own directory
sign-file: Fix warning about BIO_reset() return value
PKCS#7: Add MODULE_LICENSE() to test module
Smack - Fix build error with bringup unconfigured
sign-file: Document dependency on OpenSSL devel libraries
PKCS#7: Appropriately restrict authenticated attributes and content type
KEYS: Add a name for PKEY_ID_PKCS7
PKCS#7: Improve and export the X.509 ASN.1 time object decoder
modsign: Use extract-cert to process CONFIG_SYSTEM_TRUSTED_KEYS
extract-cert: Cope with multiple X.509 certificates in a single file
sign-file: Generate CMS message as signature instead of PKCS#7
PKCS#7: Support CMS messages also [RFC5652]
X.509: Change recorded SKID & AKID to not include Subject or Issuer
PKCS#7: Check content type and versions
MAINTAINERS: The keyrings mailing list has moved
...
Pull SG updates from Jens Axboe:
"This contains a set of scatter-gather related changes/fixes for 4.3:
- Add support for limited chaining of sg tables even for
architectures that do not set ARCH_HAS_SG_CHAIN. From Christoph.
- Add sg chain support to target_rd. From Christoph.
- Fixup open coded sg->page_link in crypto/omap-sham. From
Christoph.
- Fixup open coded crypto ->page_link manipulation. From Dan.
- Also from Dan, automated fixup of manual sg_unmark_end()
manipulations.
- Also from Dan, automated fixup of open coded sg_phys()
implementations.
- From Robert Jarzmik, addition of an sg table splitting helper that
drivers can use"
* 'for-4.3/sg' of git://git.kernel.dk/linux-block:
lib: scatterlist: add sg splitting function
scatterlist: use sg_phys()
crypto/omap-sham: remove an open coded access to ->page_link
scatterlist: remove open coded sg_unmark_end instances
crypto: replace scatterwalk_sg_chain with sg_chain
target/rd: always chain S/G list
scatterlist: allow limited chaining without ARCH_HAS_SG_CHAIN
Add OIDs for sha224, sha284 and sha512 hash algos and use them to select
the hashing algorithm. Without this, something like the following error
might get written to dmesg:
[ 31.829322] PKCS7: Unknown OID: [32] 2.16.840.1.101.3.4.2.3
[ 31.829328] PKCS7: Unknown OID: [180] 2.16.840.1.101.3.4.2.3
[ 31.829330] Unsupported digest algo: 55
Where the 55 on the third line is OID__NR indicating an unknown OID.
Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: James Morris <james.l.morris@oracle.com>
The tsgl scatterlist must be re-initialized after each
operation. Otherwise the sticky bits in the page_link will corrupt the
list with pre-mature termination or false chaining.
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch introduces the crypto skcipher interface which aims
to replace both blkcipher and ablkcipher.
It's very similar to the existing ablkcipher interface. The
main difference is the removal of the givcrypt interface. In
order to make the transition easier for blkcipher users, there
is a helper SKCIPHER_REQUEST_ON_STACK which can be used to place
a request on the stack for synchronous transforms.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CMAC is an approved cipher in FIPS 140-2. The patch allows the use
of CMAC with TDES and AES in FIPS mode.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
[hch: split from a larger patch by Dan]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch adds a missing tristate statement to Kconfig for the
new CRYPTO_NULL2 option.
Fixes: 149a39717d ("crypto: aead - Add type-safe geniv init/exit helpers")
Reported-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Kconfig option NULL2 has been added as CRYPTO_MANAGER now
depends indirectly on NULL2. However, the Makefile was not updated
to use the new option, resulting in potential build failures when
only NULL2 is enabled.
Fixes: 149a39717d ("crypto: aead - Add type-safe geniv init/exit helpers")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the AEAD conversion is complete we can rip out the old
AEAD interafce and associated code.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pretty soon the crypto_aead encrypt/decrypt hooks will disappear
as they are now always identical to those in struct aead_alg.
This patch replaces the references to these hooks with the ones
from aead_alg instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the helpers aead_init_geniv and aead_exit_geniv
which are type-safe and intended the replace the existing geniv
init/exit helpers.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that we no longer have any legacy AEAD implementations the
compatibility code path can no longer be triggered. This patch
removes it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that we no longer have any legacy AEAD implementations the
compatibility code path can no longer be triggered. This patch
removes it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As IV generators are now standalone AEAD transforms, we no longer
need to use the crypto_lookup_aead call.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move certificate handling out of the kernel/ directory and into a certs/
directory to get all the weird stuff in one place and move the generated
signing keys into this directory.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
Add a MODULE_LICENSE() line to the PKCS#7 test key module to fix this
warning:
WARNING: modpost: missing MODULE_LICENSE() in
crypto/asymmetric_keys/pkcs7_test_key.o
Whilst we're at it, also add a module description.
Reported-by: James Morris <jmorris@namei.org>
Signed-off-by: David Howells <dhowells@redhat.com>
A PKCS#7 or CMS message can have per-signature authenticated attributes
that are digested as a lump and signed by the authorising key for that
signature. If such attributes exist, the content digest isn't itself
signed, but rather it is included in a special authattr which then
contributes to the signature.
Further, we already require the master message content type to be
pkcs7_signedData - but there's also a separate content type for the data
itself within the SignedData object and this must be repeated inside the
authattrs for each signer [RFC2315 9.2, RFC5652 11.1].
We should really validate the authattrs if they exist or forbid them
entirely as appropriate. To this end:
(1) Alter the PKCS#7 parser to reject any message that has more than one
signature where at least one signature has authattrs and at least one
that does not.
(2) Validate authattrs if they are present and strongly restrict them.
Only the following authattrs are permitted and all others are
rejected:
(a) contentType. This is checked to be an OID that matches the
content type in the SignedData object.
(b) messageDigest. This must match the crypto digest of the data.
(c) signingTime. If present, we check that this is a valid, parseable
UTCTime or GeneralTime and that the date it encodes fits within
the validity window of the matching X.509 cert.
(d) S/MIME capabilities. We don't check the contents.
(e) Authenticode SP Opus Info. We don't check the contents.
(f) Authenticode Statement Type. We don't check the contents.
The message is rejected if (a) or (b) are missing. If the message is
an Authenticode type, the message is rejected if (e) is missing; if
not Authenticode, the message is rejected if (d) - (f) are present.
The S/MIME capabilities authattr (d) unfortunately has to be allowed
to support kernels already signed by the pesign program. This only
affects kexec. sign-file suppresses them (CMS_NOSMIMECAP).
The message is also rejected if an authattr is given more than once or
if it contains more than one element in its set of values.
(3) Add a parameter to pkcs7_verify() to select one of the following
restrictions and pass in the appropriate option from the callers:
(*) VERIFYING_MODULE_SIGNATURE
This requires that the SignedData content type be pkcs7-data and
forbids authattrs. sign-file sets CMS_NOATTR. We could be more
flexible and permit authattrs optionally, but only permit minimal
content.
(*) VERIFYING_FIRMWARE_SIGNATURE
This requires that the SignedData content type be pkcs7-data and
requires authattrs. In future, this will require an attribute
holding the target firmware name in addition to the minimal set.
(*) VERIFYING_UNSPECIFIED_SIGNATURE
This requires that the SignedData content type be pkcs7-data but
allows either no authattrs or only permits the minimal set.
(*) VERIFYING_KEXEC_PE_SIGNATURE
This only supports the Authenticode SPC_INDIRECT_DATA content type
and requires at least an SpcSpOpusInfo authattr in addition to the
minimal set. It also permits an SPC_STATEMENT_TYPE authattr (and
an S/MIME capabilities authattr because the pesign program doesn't
remove these).
(*) VERIFYING_KEY_SIGNATURE
(*) VERIFYING_KEY_SELF_SIGNATURE
These are invalid in this context but are included for later use
when limiting the use of X.509 certs.
(4) The pkcs7_test key type is given a module parameter to select between
the above options for testing purposes. For example:
echo 1 >/sys/module/pkcs7_test_key/parameters/usage
keyctl padd pkcs7_test foo @s </tmp/stuff.pkcs7
will attempt to check the signature on stuff.pkcs7 as if it contains a
firmware blob (1 being VERIFYING_FIRMWARE_SIGNATURE).
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
Make the X.509 ASN.1 time object decoder fill in a time64_t rather than a
struct tm to make comparison easier (unfortunately, this makes readable
display less easy) and export it so that it can be used by the PKCS#7 code
too.
Further, tighten up its parsing to reject invalid dates (eg. weird
characters, non-existent hour numbers) and unsupported dates (eg. timezones
other than 'Z' or dates earlier than 1970).
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
Since CMS is an evolution of PKCS#7, with much of the ASN.1 being
compatible, add support for CMS signed-data messages also [RFC5652 sec 5].
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-By: David Woodhouse <David.Woodhouse@intel.com>
The key identifiers fabricated from an X.509 certificate are currently:
(A) Concatenation of serial number and issuer
(B) Concatenation of subject and subjectKeyID (SKID)
When verifying one X.509 certificate with another, the AKID in the target
can be used to match the authoritative certificate. The AKID can specify
the match in one or both of two ways:
(1) Compare authorityCertSerialNumber and authorityCertIssuer from the AKID
to identifier (A) above.
(2) Compare keyIdentifier from the AKID plus the issuer from the target
certificate to identifier (B) above.
When verifying a PKCS#7 message, the only available comparison is between
the IssuerAndSerialNumber field and identifier (A) above.
However, a subsequent patch adds CMS support. Whilst CMS still supports a
match on IssuerAndSerialNumber as for PKCS#7, it also supports an
alternative - which is the SubjectKeyIdentifier field. This is used to
match to an X.509 certificate on the SKID alone. No subject information is
available to be used.
To this end change the fabrication of (B) above to be from the X.509 SKID
alone. The AKID in keyIdentifier form then only matches on that and does
not include the issuer.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-By: David Woodhouse <David.Woodhouse@intel.com>
We only support PKCS#7 signed-data [RFC2315 sec 9] content at the top level,
so reject anything else. Further, check that the version numbers in
SignedData and SignerInfo are 1 in both cases.
Note that we don't restrict the inner content type. In the PKCS#7 code we
don't parse the data attached there, but merely verify the signature over
it.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-By: David Woodhouse <David.Woodhouse@intel.com>
The ESP code has been updated to generate a completely linear
AD SG list. This unfortunately broke authencesn which expects
the AD to be divided into at least three parts.
This patch fixes it to cope with the new format. Later we will
fix it properly to accept arbitrary input and not rely on the
input being linear as part of the AEAD conversion.
Fixes: 7021b2e1cd ("esp4: Switch to new AEAD interface")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It is possible for a PKCS#7 message to have detached data. However, to verify
the signatures on a PKCS#7 message, we have to be able to digest the data.
Provide a function to supply that data. An error is given if the PKCS#7
message included embedded data.
This is used in a subsequent patch to supply the data to module signing where
the signature is in the form of a PKCS#7 message with detached data, whereby
the detached data is the module content that is signed.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Vivek Goyal <vgoyal@redhat.com>
If an X.509 certificate has an AuthorityKeyIdentifier extension that provides
an issuer and serialNumber, then make it so that these are used in preference
to the keyIdentifier field also held therein for searching for the signing
certificate.
If both the issuer+serialNumber and the keyIdentifier are supplied, then the
certificate is looked up by the former but the latter is checked as well. If
the latter doesn't match the subjectKeyIdentifier of the parent certificate,
EKEYREJECTED is returned.
This makes it possible to chain X.509 certificates based on the issuer and
serialNumber fields rather than on subjectKeyIdentifier. This is necessary as
we are having to deal with keys that are represented by X.509 certificates
that lack a subjectKeyIdentifier.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Vivek Goyal <vgoyal@redhat.com>
Extract both parts of the AuthorityKeyIdentifier, not just the keyIdentifier,
as the second part can be used to match X.509 certificates by issuer and
serialNumber.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Vivek Goyal <vgoyal@redhat.com>
CRYPTO_AUTHENC needs to depend on CRYPTO_NULL as authenc uses
null for copying.
Reported-by: Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
