* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits)
Documentation/iostats.txt: bit-size reference etc.
cfq-iosched: removing unnecessary think time checking
cfq-iosched: Don't clear queue stats when preempt.
blk-throttle: Reset group slice when limits are changed
blk-cgroup: Only give unaccounted_time under debug
cfq-iosched: Don't set active queue in preempt
block: fix non-atomic access to genhd inflight structures
block: attempt to merge with existing requests on plug flush
block: NULL dereference on error path in __blkdev_get()
cfq-iosched: Don't update group weights when on service tree
fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away
block: Require subsystems to explicitly allocate bio_set integrity mempool
jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
fs: make fsync_buffers_list() plug
mm: make generic_writepages() use plugging
blk-cgroup: Add unaccounted time to timeslice_used.
block: fixup plugging stubs for !CONFIG_BLOCK
block: remove obsolete comments for blkdev_issue_zeroout.
blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.
...
Fix up conflicts in fs/{aio.c,super.c}
If one or more function probes (like traceon) are enabled,
and there's no other function filter, the first probe
func is skipped (which one depends on the position in the hash).
$ echo sys_open:traceon sys_close:traceon > ./set_ftrace_filter
$ cat set_ftrace_filter
#### all functions enabled ####
sys_close:traceon:unlimited
$
The reason was, that in the case of no other function filter,
the func_pos was not properly updated before calling t_hash_start.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1297874134-7008-1-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits)
trace, filters: Initialize the match variable in process_ops() properly
trace, documentation: Fix branch profiling location in debugfs
oprofile, s390: Cleanups
oprofile, s390: Remove hwsampler_files.c and merge it into init.c
perf: Fix tear-down of inherited group events
perf: Reorder & optimize perf_event_context to remove alignment padding on 64 bit builds
perf: Handle stopped state with tracepoints
perf: Fix the software events state check
perf, powerpc: Handle events that raise an exception without overflowing
perf, x86: Use INTEL_*_CONSTRAINT() for all PEBS event constraints
perf, x86: Clean up SandyBridge PEBS events
perf lock: Fix sorting by wait_min
perf tools: Version incorrect with some versions of grep
perf evlist: New command to list the names of events present in a perf.data file
perf script: Add support for H/W and S/W events
perf script: Add support for dumping symbols
perf script: Support custom field selection for output
perf script: Move printing of 'common' data from print_event and rename
perf tracing: Remove print_graph_cpu and print_graph_proc from trace-event-parse
perf script: Change process_event prototype
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (47 commits)
doc: CONFIG_UNEVICTABLE_LRU doesn't exist anymore
Update cpuset info & webiste for cgroups
dcdbas: force SMI to happen when expected
arch/arm/Kconfig: remove one to many l's in the word.
asm-generic/user.h: Fix spelling in comment
drm: fix printk typo 'sracth'
Remove one to many n's in a word
Documentation/filesystems/romfs.txt: fixing link to genromfs
drivers:scsi Change printk typo initate -> initiate
serial, pch uart: Remove duplicate inclusion of linux/pci.h header
fs/eventpoll.c: fix spelling
mm: Fix out-of-date comments which refers non-existent functions
drm: Fix printk typo 'failled'
coh901318.c: Change initate to initiate.
mbox-db5500.c Change initate to initiate.
edac: correct i82975x error-info reported
edac: correct i82975x mci initialisation
edac: correct commented info
fs: update comments to point correct document
target: remove duplicate include of target/target_core_device.h from drivers/target/target_core_hba.c
...
Trivial conflict in fs/eventpoll.c (spelling vs addition)
Make sure the 'match' variable always has a value.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The debugfs interface for branch profiling is through
/sys/kernel/debug/tracing/trace_stat/branch_annotated
/sys/kernel/debug/tracing/trace_stat/branch_all
so update the Kconfig accordingly.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <alpine.DEB.2.00.1103161716320.11407@chino.kir.corp.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In blk_add_trace_rq, we only chose the minor 2 bits from
request's cmd_flags and did some check for discard.
so most of other flags(e.g, REQ_SYNC) are missing.
For example, with a sync write after blkparse we get:
8,16 1 1 0.001776503 7509 A WS 1349632 + 1024 <- (8,17) 1347584
8,16 1 2 0.001776813 7509 Q WS 1349632 + 1024 [dd]
8,16 1 3 0.001780395 7509 G WS 1349632 + 1024 [dd]
8,16 1 5 0.001783186 7509 I W 1349632 + 1024 [dd]
8,16 1 11 0.001816987 7509 D W 1349632 + 1024 [dd]
8,16 0 2 0.006218192 0 C W 1349632 + 1024 [0]
Since now we have integrated the flags of both bio and request,
it is safe to pass rq->cmd_flags directly to __blk_add_trace.
With this patch, after a sync write we get:
8,16 1 1 0.001776900 5425 A WS 1189888 + 1024 <- (8,17) 1187840
8,16 1 2 0.001777179 5425 Q WS 1189888 + 1024 [dd]
8,16 1 3 0.001780797 5425 G WS 1189888 + 1024 [dd]
8,16 1 5 0.001783402 5425 I WS 1189888 + 1024 [dd]
8,16 1 11 0.001817468 5425 D WS 1189888 + 1024 [dd]
8,16 0 2 0.005640709 0 C WS 1189888 + 1024 [0]
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
If the kernel command line declares a tracer "ftrace=sometracer" and
that tracer is either not defined or is enabled after irqsoff,
then the irqs off selftest will fail with the following error:
Testing tracer irqsoff:
------------[ cut here ]------------
WARNING: at /home/rostedt/work/autotest/nobackup/linux-test.git/kernel/trace/tra
ce.c:713 update_max_tr_single+0xfa/0x11b()
Hardware name:
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.38-rc8-test #1
Call Trace:
[<c0441d9d>] ? warn_slowpath_common+0x65/0x7a
[<c049adb2>] ? update_max_tr_single+0xfa/0x11b
[<c0441dc1>] ? warn_slowpath_null+0xf/0x13
[<c049adb2>] ? update_max_tr_single+0xfa/0x11b
[<c049e454>] ? stop_critical_timing+0x154/0x204
[<c049b54b>] ? trace_selftest_startup_irqsoff+0x5b/0xc1
[<c049b54b>] ? trace_selftest_startup_irqsoff+0x5b/0xc1
[<c049b54b>] ? trace_selftest_startup_irqsoff+0x5b/0xc1
[<c049e529>] ? time_hardirqs_on+0x25/0x28
[<c0468bca>] ? trace_hardirqs_on_caller+0x18/0x12f
[<c0468cec>] ? trace_hardirqs_on+0xb/0xd
[<c049b54b>] ? trace_selftest_startup_irqsoff+0x5b/0xc1
[<c049b6b8>] ? register_tracer+0xf8/0x1a3
[<c14e93fe>] ? init_irqsoff_tracer+0xd/0x11
[<c040115e>] ? do_one_initcall+0x71/0x121
[<c14e93f1>] ? init_irqsoff_tracer+0x0/0x11
[<c14ce3a9>] ? kernel_init+0x13a/0x1b6
[<c14ce26f>] ? kernel_init+0x0/0x1b6
[<c0403842>] ? kernel_thread_helper+0x6/0x10
---[ end trace e93713a9d40cd06c ]---
.. no entries found ..FAILED!
What happens is the "ftrace=..." will expand the ring buffer to its
default size (from its minimum size) but it will not expand the
max ring buffer (the ring buffer to store maximum latencies).
When the irqsoff test runs, it will call the ring buffer swap routine
that checks if the max ring buffer is the same size as the normal
ring buffer, and will fail if it is not. This causes the test to fail.
The solution is to expand the max ring buffer before running the self
test if the max ring buffer is used by that tracer and the normal ring
buffer is expanded. The max ring buffer should be shrunk again after
the test is done to save space.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Trace events belonging to a module only exists when the module is
loaded. Well, we can use trace_set_clr_event funtion to enable some
trace event at the module init routine, so that we will not miss
something while loading then module.
So, Export the trace_set_clr_event function so that module can use it.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
LKML-Reference: <1289196312-25323-1-git-send-email-yuanhan.liu@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The "Delta way too big" warning might appear on a system with a
unstable shed clock right after the system is resumed and tracing
was enabled at time of suspend.
Since it's not realy a bug, and the unstable sched clock is working
fast and reliable otherwise, Steven suggested to keep using the
sched clock in any case and just to make note in the warning itself.
v2 changes:
- added #ifdef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <20110218145219.GD2604@jolsa.brq.redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Formatting change only to improve code readability. No code changes except to
introduce intermediate variables.
Signed-off-by: David Sharp <dhsharp@google.com>
LKML-Reference: <1291421609-14665-13-git-send-email-dhsharp@google.com>
[ Keep variable declarations and assignment separate ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: David Sharp <dhsharp@google.com>
LKML-Reference: <1291421609-14665-6-git-send-email-dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The lock_depth field in the event headers was added as a temporary
data point for help in removing the BKL. Now that the BKL is pretty
much been removed, we can remove this field.
This in turn changes the header from 12 bytes to 8 bytes,
removing the 4 byte buffer that gcc would insert if the first field
in the data load was 8 bytes in size.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: David Sharp <dhsharp@google.com>
LKML-Reference: <1291421609-14665-3-git-send-email-dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add an "overwrite" trace_option for ftrace to control whether the buffer should
be overwritten on overflow or not. The default remains to overwrite old events
when the buffer is full. This patch adds the option to instead discard newest
events when the buffer is full. This is useful to get a snapshot of traces just
after enabling traces. Dropping the current event is also a simpler code path.
Signed-off-by: David Sharp <dhsharp@google.com>
LKML-Reference: <1291844807-15481-1-git-send-email-dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If we enable trace events to trace block actions, We use
blk_fill_rwbs_rq to analyze the corresponding actions
in request's cmd_flags, but we only choose the minor 2 bits
from it, so most of other flags(e.g, REQ_SYNC) are missing.
For example, with a sync write we get:
write_test-2409 [001] 160.013869: block_rq_insert: 3,64 W 0 () 258135 + =
8 [write_test]
Since now we have integrated the flags of both bio and request,
it is safe to pass rq->cmd_flags directly to blk_fill_rwbs and
blk_fill_rwbs_rq isn't needed any more.
With this patch, after a sync write we get:
write_test-2417 [000] 226.603878: block_rq_insert: 3,64 WS 0 () 258135 +=
8 [write_test]
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
This reverts commit 5e38ca8f3e.
Breaks the build of several !CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
architectures.
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Message-ID: <20110217171823.GB17058@elte.hu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add NULL check for avoiding NULL pointer deref.
This bug has been introduced by:
1ff511e35e: tracing/kprobes: Add bitfield type
which causes a null pointer dereference bug when kprobe-tracer
parses an argument without type.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110214054807.8919.69740.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reported-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
When the fuction graph tracer starts, it needs to make a special
stack for each task to save the real return values of the tasks.
All running tasks have this stack created, as well as any new
tasks.
On CPU hot plug, the new idle task will allocate a stack as well
when init_idle() is called. The problem is that cpu hotplug does
not create a new idle_task. Instead it uses the idle task that
existed when the cpu went down.
ftrace_graph_init_task() will add a new ret_stack to the task
that is given to it. Because a clone will make the task
have a stack of its parent it does not check if the task's
ret_stack is already NULL or not. When the CPU hotplug code
starts a CPU up again, it will allocate a new stack even
though one already existed for it.
The solution is to treat the idle_task specially. In fact, the
function_graph code already does, just not at init_idle().
Instead of using the ftrace_graph_init_task() for the idle task,
which that function expects the task to be a clone, have a
separate ftrace_graph_init_idle_task(). Also, we will create a
per_cpu ret_stack that is used by the idle task. When we call
ftrace_graph_init_idle_task() it will check if the idle task's
ret_stack is NULL, if it is, then it will assign it the per_cpu
ret_stack.
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
cdrom: support devices that have check_events but not media_changed
cfq-iosched: Don't wait if queue already has requests.
blkio-throttle: Avoid calling blkiocg_lookup_group() for root group
cfq: rename a function to give it more appropriate name
cciss: make cciss_revalidate not loop through CISS_MAX_LUNS volumes unnecessarily.
drivers/block/aoe/Makefile: replace the use of <module>-objs with <module>-y
loop: queue_lock NULL pointer derefence in blk_throtl_exit
drivers/block/Makefile: replace the use of <module>-objs with <module>-y
blktrace: Don't output messages if NOTIFY isn't set.
tracing_enabled should not be used, it is heavy weight and does not
do much in helping lower the overhead.
tracing_on should be used instead. Warn users to use tracing_on
when tracing_enabled is used as it will soon be removed from the
tracing directory.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace events sched_switch and sched_wakeup do the same thing
as the stand alone sched_switch tracer does. It is no longer needed.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The warning "Delta way too big" warning might appear on a system with
unstable shed clock right after the system is resumed and tracing
was enabled during the suspend.
Since it's not realy bug, and the unstable sched clock is working
fast and reliable otherwise, Steven suggested to keep using the
sched clock in any case and just to make note in the warning itself.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1296649698-6003-1-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Many system calls are unimplemented and mapped to sys_ni_syscall, but at
boot ftrace would still search through every syscall metadata entry for
a match which wouldn't be there.
This patch adds causes the search to terminate early if the system call
is not mapped.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
LKML-Reference: <1296703645-18718-7-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Some architectures have unusual symbol names and the generic code to
match the symbol name with the function name for the syscall metadata
will fail. For example, symbols on PPC64 start with a period and the
generic code will fail to match them.
This patch moves the match logic out into a separate function which an
arch can override by defining ARCH_HAS_SYSCALL_MATCH_SYM_NAME in
asm/ftrace.h and implementing arch_syscall_match_sym_name.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
LKML-Reference: <1296703645-18718-5-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Some architectures use non-trivial system call tables and will not work
with the generic arch_syscall_addr code. For example, PowerPC64 uses a
table of twin long longs.
This patch makes the generic arch_syscall_addr weak to allow
architectures with non-trivial system call tables to override it.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
LKML-Reference: <1296703645-18718-4-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With the ftrace events now checking if the syscall_nr is valid upon
initialisation it should no longer be possible to register or unregister
a syscall event without a valid syscall_nr since they should not be
created. This adds a WARN_ON_ONCE in the register and unregister
functions to locate potential regressions in the future.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
LKML-Reference: <1296703645-18718-3-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
FTRACE_SYSCALLS would create events for each and every system call, even
if it had failed to map the system call's name with it's number. This
resulted in a number of events being created that would not behave as
expected.
This could happen, for example, on architectures who's symbol names are
unusual and will not match the system call name. It could also happen
with system calls which were mapped to sys_ni_syscall.
This patch changes the default system call number in the metadata to -1.
If the system call name from the metadata is not successfully mapped to
a system call number during boot, than the event initialisation routine
will now return an error, preventing the event from being created.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
LKML-Reference: <1296703645-18718-2-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Because the filters are processed first and then activated
(added to the call), we no longer need to worry about the preds
of the filter in __alloc_preds() being used. As the filter that
is allocating preds is not activated yet.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When creating a new filter, instead of allocating the filter to the
event call first and then processing the filter, it is easier to
process a temporary filter and then just swap it with the call filter.
By doing this, it simplifies the code.
A filter is allocated and processed, when it is done, it is
swapped with the call filter, synchronize_sched() is called to make
sure all callers are done with the old filter (filters are called
with premption disabled), and then the old filter is freed.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Now that the filter logic does not require to save the pred results
on the stack, we can increase the max number of preds we allow.
As the preds are index by a short value, and we use the MSBs as flags
we can increase the max preds to 2^14 (16384) which should be way
more than enough.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The MAX_FILTER_PRED is only needed by the kernel/trace/*.c files.
Move it to kernel/trace/trace.h.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are many cases that a filter will contain multiple ORs or
ANDs together near the leafs. Walking up and down the tree to get
to the next compare can be a waste.
If there are several ORs or ANDs together, fold them into a single
pred and allocate an array of the conditions that they check.
This will speed up the filter by linearly walking an array
and can still break out if a short circuit condition is met.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Since the filter walks a tree to determine if a match is made or not,
if the tree was incorrectly created, it could cause an infinite loop.
Add a check to walk the entire tree before assigning it as a filter
to make sure the tree is correct.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The test if we should break out early for OR and AND operations
can be optimized by comparing the current result with
(pred->op == OP_OR)
That is if the result is true and the op is an OP_OR, or
if the result is false and the op is not an OP_OR (thus an OP_AND)
we can break out early in either case. Otherwise we continue
processing.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the filter_match_preds() requires a stack to push
and pop the preds to determine if the filter matches the record or not.
This has two drawbacks:
1) It requires a stack to store state information. As this is done
in fast paths we can't allocate the storage for this stack, and
we can't use a global as it must be re-entrant. The stack is stored
on the kernel stack and this greatly limits how many preds we
may allow.
2) All conditions are calculated even when a short circuit exists.
a || b will always calculate a and b even though a was determined
to be true.
Using a tree we can walk a constant structure that will save
the state as we go. The algorithm is simply:
pred = root;
do {
switch (move) {
case MOVE_DOWN:
if (OR or AND) {
pred = left;
continue;
}
if (pred == root)
break;
match = pred->fn();
pred = pred->parent;
move = left child ? MOVE_UP_FROM_LEFT : MOVE_UP_FROM_RIGHT;
continue;
case MOVE_UP_FROM_LEFT:
/* Only OR or AND can be a parent */
if (match && OR || !match && AND) {
/* short circuit */
if (pred == root)
break;
pred = pred->parent;
move = left child ?
MOVE_UP_FROM_LEFT :
MOVE_UP_FROM_RIGHT;
continue;
}
pred = pred->right;
move = MOVE_DOWN;
continue;
case MOVE_UP_FROM_RIGHT:
if (pred == root)
break;
pred = pred->parent;
move = left child ? MOVE_UP_FROM_LEFT : MOVE_UP_FROM_RIGHT;
continue;
}
done = 1;
} while (!done);
This way there's no strict limit to how many preds we allow
and it also will short circuit the logical operations when possible.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently we allocate an array of pointers to filter_preds, and then
allocate a separate filter_pred for each item in the array.
This adds slight overhead in the filters as it needs to derefernce
twice to get to the op condition.
Allocating the preds themselves in a single array removes a dereference
as well as helps on the cache footprint.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
By separating out the reseting of the filter->n_preds to zero from
the reallocation of preds for the filter, we can reset groups of
filters first, call synchronize_sched() just once, and then reallocate
each of the filters in the system group.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
For every filter that is made, we create predicates to hold every
operation within the filter. We have a max of 32 predicates that we
can hold. Currently, we allocate all 32 even if we only need to
use one.
Part of the reason we do this is that the filter can be used at
any moment by any event. Fortunately, the filter is only used
with preemption disabled. By reseting the count of preds used "n_preds"
to zero, then performing a synchronize_sched(), we can safely
free and reallocate a new array of preds.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ops OR and AND act different from the other ops, as they
are the only ones to take other ops as their arguements.
These ops als change the logic of the filter_match_preds.
By removing the OR and AND fn's we can also remove the val1 and val2
that is passed to all other fn's and are unused.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The n_preds field of a file can change at anytime, and even can become
zero, just as the filter is about to be processed by an event.
In the case that is zero on entering the filter, return 1, telling
the caller the event matchs and should be trace.
Also use a variable and assign it with ACCESS_ONCE() such that the
count stays consistent within the function.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add bitfield type for tracing arguments on kprobe-tracer. The syntax of
a bitfield type is:
b<bit-size>@<bit-offset>/<container-size>
e.g.
Accessing 2 bits-width field with 4 bits-offset in 32 bits-width data at
4 bytes offseted from the address pointed by AX register:
+4(%ax):b2@4/32
Since the width of container data depends on the arch, so I just added
the container-size at the end.
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20110204125205.9507.11363.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since strict_strtol() accepts minus digits started with '-', it doesn't
need to invert after converting.
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20110204125153.9507.49335.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the syscall_meta structures for the syscall tracepoints are
placed in the __syscall_metadata section, and at link time, the linker
makes one large array of all these syscall metadata structures. On boot
up, this array is read (much like the initcall sections) and the syscall
data is processed.
The problem is that there is no guarantee that gcc will place complex
structures nicely together in an array format. Two structures in the
same file may be placed awkwardly, because gcc has no clue that they
are suppose to be in an array.
A hack was used previous to force the alignment to 4, to pack the
structures together. But this caused alignment issues with other
architectures (sparc).
Instead of packing the structures into an array, the structures' addresses
are now put into the __syscall_metadata section. As pointers are always the
natural alignment, gcc should always pack them tightly together
(otherwise initcall, extable, etc would also fail).
By having the pointers to the structures in the section, we can still
iterate the trace_events without causing unnecessary alignment problems
with other architectures, or depending on the current behaviour of
gcc that will likely change in the future just to tick us kernel developers
off a little more.
The __syscall_metadata section is also moved into the .init.data section
as it is now only needed at boot up.
Suggested-by: David Miller <davem@davemloft.net>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the trace_event structures are placed in the _ftrace_events
section, and at link time, the linker makes one large array of all
the trace_event structures. On boot up, this array is read (much like
the initcall sections) and the events are processed.
The problem is that there is no guarantee that gcc will place complex
structures nicely together in an array format. Two structures in the
same file may be placed awkwardly, because gcc has no clue that they
are suppose to be in an array.
A hack was used previous to force the alignment to 4, to pack the
structures together. But this caused alignment issues with other
architectures (sparc).
Instead of packing the structures into an array, the structures' addresses
are now put into the _ftrace_event section. As pointers are always the
natural alignment, gcc should always pack them tightly together
(otherwise initcall, extable, etc would also fail).
By having the pointers to the structures in the section, we can still
iterate the trace_events without causing unnecessary alignment problems
with other architectures, or depending on the current behaviour of
gcc that will likely change in the future just to tick us kernel developers
off a little more.
The _ftrace_event section is also moved into the .init.data section
as it is now only needed at boot up.
Suggested-by: David Miller <davem@davemloft.net>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
During early boot, local IRQ is disabled until IRQ subsystem is
properly initialized. During this time, no one should enable
local IRQ and some operations which usually are not allowed with
IRQ disabled, e.g. operations which might sleep or require
communications with other processors, are allowed.
lockdep tracked this with early_boot_irqs_off/on() callbacks.
As other subsystems need this information too, move it to
init/main.c and make it generally available. While at it,
toggle the boolean to early_boot_irqs_disabled instead of
enabled so that it can be initialized with %false and %true
indicates the exceptional condition.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20110120110635.GB6036@htj.dyndns.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now if we enable blktrace, cfq has too many messages output to the
trace buffer. It is fine if we don't specify any action mask.
But if I do like this:
blktrace /dev/sdb -a issue -a complete -o - | blkparse -i -
I only want to see 'D' and 'C', while with the following command
dd if=/mnt/ocfs2/test of=/dev/null bs=4k count=1 iflag=direct
I will get(with a 2.6.37 vanilla kernel):
8,16 0 0 0.000000000 0 m N cfq3805 alloced
8,16 0 0 0.000004126 0 m N cfq3805 insert_request
8,16 0 0 0.000004884 0 m N cfq3805 add_to_rr
8,16 0 0 0.000008417 0 m N cfq workload slice:300
8,16 0 0 0.000009557 0 m N cfq3805 set_active wl_prio:0 wl_type:2
8,16 0 0 0.000010640 0 m N cfq3805 fifo= (null)
8,16 0 0 0.000011193 0 m N cfq3805 dispatch_insert
8,16 0 0 0.000012221 0 m N cfq3805 dispatched a request
8,16 0 0 0.000012802 0 m N cfq3805 activate rq, drv=1
8,16 0 1 0.000013181 3805 D R 114759 + 8 [dd]
8,16 0 2 0.000164244 0 C R 114759 + 8 [0]
8,16 0 0 0.000167997 0 m N cfq3805 complete rqnoidle 0
8,16 0 0 0.000168782 0 m N cfq3805 set_slice=100
8,16 0 0 0.000169874 0 m N cfq3805 arm_idle: 8 group_idle: 0
8,16 0 0 0.000170189 0 m N cfq schedule dispatch
8,16 0 0 0.000397938 0 m N cfq3805 slice expired t=0
8,16 0 0 0.000399763 0 m N cfq3805 sl_used=1 disp=1 charge=1 iops=0 sect=8
8,16 0 0 0.000400227 0 m N cfq3805 del_from_rr
8,16 0 0 0.000400882 0 m N cfq3805 put_queue
See, there are 19 lines while I only need 2. I don't think it is
appropriate for a user.
So this patch will disable any messages if the BLK_TC_NOTIFY isn't set.
Now the output for the same command will look like:
8,16 0 1 0.000000000 4908 D R 114759 + 8 [dd]
8,16 0 2 0.000146827 0 C R 114759 + 8 [0]
Yes, it is what I want to see.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Fix a bunch of
warning: ‘inline’ is not at beginning of declaration
messages when building a 'make allyesconfig' kernel with -Wextra.
These warnings are trivial to kill, yet rather annoying when building with
-Wextra.
The more we can cut down on pointless crap like this the better (IMHO).
A previous patch to do this for a 'allnoconfig' build has already been
merged. This just takes the cleanup a little further.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
rcu: avoid pointless blocked-task warnings
rcu: demote SRCU_SYNCHRONIZE_DELAY from kernel-parameter status
rtmutex: Fix comment about why new_owner can be NULL in wake_futex_pi()
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, olpc: Add missing Kconfig dependencies
x86, mrst: Set correct APB timer IRQ affinity for secondary cpu
x86: tsc: Fix calibration refinement conditionals to avoid divide by zero
x86, ia64, acpi: Clean up x86-ism in drivers/acpi/numa.c
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
timekeeping: Make local variables static
time: Rename misnamed minsec argument of clocks_calc_mult_shift()
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: Remove syscall_exit_fields
tracing: Only process module tracepoints once
perf record: Add "nodelay" mode, disabled by default
perf sched: Fix list of events, dropping unsupported ':r' modifier
Revert "perf tools: Emit clearer message for sys_perf_event_open ENOENT return"
perf top: Fix annotate segv
perf evsel: Fix order of event list deletion
There is no need for syscall_exit_fields as the syscall
exit event class can already host the fields in its structure,
like most other trace events do by default. Use that
default behavior instead.
Following this scheme, we don't need anymore to override the
get_fields() callback of the syscall exit event class either.
Hence both syscall_exit_fields and syscall_get_exit_fields() can
be removed.
Also changed some indentation to keep the following under 80
characters:
".fields = LIST_HEAD_INIT(event_class_syscall_exit.fields),"
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4D301C0E.8090408@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block: (43 commits)
block: ensure that completion error gets properly traced
blktrace: add missing probe argument to block_bio_complete
block cfq: don't use atomic_t for cfq_group
block cfq: don't use atomic_t for cfq_queue
block: trace event block fix unassigned field
block: add internal hd part table references
block: fix accounting bug on cross partition merges
kref: add kref_test_and_get
bio-integrity: mark kintegrityd_wq highpri and CPU intensive
block: make kblockd_workqueue smarter
Revert "sd: implement sd_check_events()"
block: Clean up exit_io_context() source code.
Fix compile warnings due to missing removal of a 'ret' variable
fs/block: type signature of major_to_index(int) to major_to_index(unsigned)
block: convert !IS_ERR(p) && p to !IS_ERR_NOR_NULL(p)
cfq-iosched: don't check cfqg in choose_service_tree()
fs/splice: Pull buf->ops->confirm() from splice_from_pipe actors
cdrom: export cdrom_check_events()
sd: implement sd_check_events()
sr: implement sr_check_events()
...
We normally just use the BIO_UPTODATE flag to signal 0/-EIO. If
we have more information available, we should pass that along to
the trace output.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
DEFINE_TRACE should also exist when CONFIG_EVENT_TRACING=n. Otherwise, setting
only TRACEPOINTS=y is broken.
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
LKML-Reference: <20101028153117.GA4051@Krystal>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
While running my ftrace stress test, this showed up:
BUG: sleeping function called from invalid context at mm/mmap.c:233
...
note: cat[3293] exited with preempt_count 1
The bug was introduced by commit 91e86e560d
("tracing: Fix recursive user stack trace")
Cc: <stable@kernel.org>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4D0089AC.1020802@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Function-scope statics are discouraged because they are
easily overlooked and can cause subtle bugs/races due to
their global (non-SMP safe) nature.
Linus noticed that we did this for sched_param - at minimum
make the const.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: Message-ID: <AANLkTinotRxScOHEb0HgFgSpGPkq_6jKTv5CfvnQM=ee@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
blktrace.c block bio complete callback needs to gain a new argument to reflect
the newly added "error" tracepoint argument. This is needed to match the new
block_bio_complete TRACE_EVENT as of
commit de983a7bfcb7c020901ca6e2314cf55a4207ab5a.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
CC: Jeff Moyer <jmoyer@redhat.com>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Ingo Molnar <mingo@elte.hu>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits)
sched: Change wait_for_completion_*_timeout() to return a signed long
sched, autogroup: Fix reference leak
sched, autogroup: Fix potential access to freed memory
sched: Remove redundant CONFIG_CGROUP_SCHED ifdef
sched: Fix interactivity bug by charging unaccounted run-time on entity re-weight
sched: Move periodic share updates to entity_tick()
printk: Use this_cpu_{read|write} api on printk_pending
sched: Make pushable_tasks CONFIG_SMP dependant
sched: Add 'autogroup' scheduling feature: automated per session task groups
sched: Fix unregister_fair_sched_group()
sched: Remove unused argument dest_cpu to migrate_task()
mutexes, sched: Introduce arch_mutex_cpu_relax()
sched: Add some clock info to sched_debug
cpu: Remove incorrect BUG_ON
cpu: Remove unused variable
sched: Fix UP build breakage
sched: Make task dump print all 15 chars of proc comm
sched: Update tg->shares after cpu.shares write
sched: Allow update_cfs_load() to update global load
sched: Implement demand based update_cfs_load()
...
Add these new power trace events:
power:cpu_idle
power:cpu_frequency
power:machine_suspend
The old C-state/idle accounting events:
power:power_start
power:power_end
Have now a replacement (but we are still keeping the old
tracepoints for compatibility):
power:cpu_idle
and
power:power_frequency
is replaced with:
power:cpu_frequency
power:machine_suspend is newly introduced.
Jean Pihet has a patch integrated into the generic layer
(kernel/power/suspend.c) which will make use of it.
the type= field got removed from both, it was never
used and the type is differed by the event type itself.
perf timechart userspace tool gets adjusted in a separate patch.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Jean Pihet <jean.pihet@newoldbits.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: rjw@sisk.pl
LKML-Reference: <1294073445-14812-3-git-send-email-trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1290072314-31155-2-git-send-email-trenn@suse.de>
power_frequency moved to drivers/cpufreq/cpufreq.c which has
to be compiled in, no need to export it.
intel_idle can a be module though...
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jean Pihet <jean.pihet@newoldbits.com>
Cc: Jean Pihet <j-pihet@ti.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: rjw@sisk.pl
LKML-Reference: <1294073445-14812-2-git-send-email-trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1290072314-31155-2-git-send-email-trenn@suse.de>
Fix two related problems in the event-copying loop of
ring_buffer_read_page.
The loop condition for copying events is off-by-one.
"len" is the remaining space in the caller-supplied page.
"size" is the size of the next event (or two events).
If len == size, then there is just enough space for the next event.
size was set to rb_event_ts_length, which may include the size of two
events if the first event is a time-extend, in order to assure time-
extends are kept together with the event after it. However,
rb_advance_reader always advances by one event. This would result in the
event after any time-extend being duplicated. Instead, get the size of
a single event for the memcpy, but use rb_event_ts_length for the loop
condition.
Signed-off-by: David Sharp <dhsharp@google.com>
LKML-Reference: <1293064704-8101-1-git-send-email-dhsharp@google.com>
LKML-Reference: <AANLkTin7nLrRPc9qGjdjHbeVDDWiJjAiYyb-L=gH85bx@mail.gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Conflicts:
MAINTAINERS
arch/arm/mach-omap2/pm24xx.c
drivers/scsi/bfa/bfa_fcpim.c
Needed to update to apply fixes for which the old branch was too
outdated.
The file_ops struct for the "trace" special file defined llseek as seq_lseek().
However, if the file was opened for writing only, seq_open() was not called,
and the seek would dereference a null pointer, file->private_data.
This patch introduces a new wrapper for seq_lseek() which checks if the file
descriptor is opened for reading first. If not, it does nothing.
Cc: <stable@kernel.org>
Signed-off-by: Slava Pestov <slavapestov@google.com>
LKML-Reference: <1290640396-24179-1-git-send-email-slavapestov@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf symbols: Remove incorrect open-coded container_of()
perf record: Handle restrictive permissions in /proc/{kallsyms,modules}
x86/kprobes: Prevent kprobes to probe on save_args()
irq_work: Drop cmpxchg() result
perf: Fix owner-list vs exit
x86, hw_nmi: Move backtrace_mask declaration under ARCH_HAS_NMI_WATCHDOG
tracing: Fix recursive user stack trace
perf,hw_breakpoint: Initialize hardware api earlier
x86: Ignore trap bits on single step exceptions
tracing: Force arch_local_irq_* notrace for paravirt
tracing: Fix module use of trace_bprintk()
Currently we have in something like the sched_switch event:
field:char prev_comm[TASK_COMM_LEN]; offset:12; size:16; signed:1;
When a userspace tool such as perf tries to parse this, the
TASK_COMM_LEN is meaningless. This is done because the TRACE_EVENT() macro
simply uses a #len to show the string of the length. When the length is
an enum, we get a string that means nothing for tools.
By adding a static buffer and a mutex to protect it, we can store the
string into that buffer with snprintf and show the actual number.
Now we get:
field:char prev_comm[16]; offset:12; size:16; signed:1;
Something much more useful.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This adds a new trace event internal flag that allows them to be
used in perf by non privileged users in case of task bound tracing.
This is desired for syscalls tracepoint because they don't leak
global system informations, like some other tracepoints.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jason Baron <jbaron@redhat.com>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.
Remove this too as a cleanup.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
[S390] kprobes: Fix the return address of multiple kretprobes
[S390] kprobes: disable interrupts throughout
[S390] ftrace: build without frame pointers on s390
[S390] mm: add devmem_is_allowed() for STRICT_DEVMEM checking
[S390] vmlogrdr: purge after recording is switched off
[S390] cio: fix incorrect ccw_device_init_count
[S390] tape: add medium state notifications
[S390] fix get_user_pages_fast
The user stack trace can fault when examining the trace. Which
would call the do_page_fault handler, which would trace again,
which would do the user stack trace, which would fault and call
do_page_fault again ...
Thus this is causing a recursive bug. We need to have a recursion
detector here.
[ Resubmitted by Jiri Olsa ]
[ Eric Dumazet recommended using __this_cpu_* instead of __get_cpu_* ]
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1289390172-9730-3-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
REQ_HARDBARRIER is dead now, so remove the leftovers. What's left
at this point is:
- various checks inside the block layer.
- sanity checks in bio based drivers.
- now unused bio_empty_barrier helper.
- Xen blockfront use of BLKIF_OP_WRITE_BARRIER - it's dead for a while,
but Xen really needs to sort out it's barrier situaton.
- setting of ordered tags in uas - dead code copied from old scsi
drivers.
- scsi different retry for barriers - it's dead and should have been
removed when flushes were converted to FS requests.
- blktrace handling of barriers - removed. Someone who knows blktrace
better should add support for REQ_FLUSH and REQ_FUA, though.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
s390 doesn't need FRAME_POINTERS in order to have a working function tracer.
We don't need frame pointers in order to get strack traces since we always
have valid backchains by using the -mkernel-backchain gcc option.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Andrew Morton pointed out almost all sched_setscheduler() callers are
using fixed parameters and can be converted to static. It reduces runtime
memory use a little.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: James Morris <jmorris@namei.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now that include/linux/kdb.h properly exports all the functions
required to dynamically add a kdb shell command, the reference to the
private kdb header can be removed.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
vfs: make no_llseek the default
vfs: don't use BKL in default_llseek
llseek: automatically add .llseek fop
libfs: use generic_file_llseek for simple_attr
mac80211: disallow seeks in minstrel debug code
lirc: make chardev nonseekable
viotape: use noop_llseek
raw: use explicit llseek file operations
ibmasmfs: use generic_file_llseek
spufs: use llseek in all file operations
arm/omap: use generic_file_llseek in iommu_debug
lkdtm: use generic_file_llseek in debugfs
net/wireless: use generic_file_llseek in debugfs
drm: use noop_llseek
* 'config' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
BKL: introduce CONFIG_BKL.
dabusb: remove the BKL
sunrpc: remove the big kernel lock
init/main.c: remove BKL notations
blktrace: remove the big kernel lock
rtmutex-tester: make it build without BKL
dvb-core: kill the big kernel lock
dvb/bt8xx: kill the big kernel lock
tlclk: remove big kernel lock
fix rawctl compat ioctls breakage on amd64 and itanic
uml: kill big kernel lock
parisc: remove big kernel lock
cris: autoconvert trivial BKL users
alpha: kill big kernel lock
isapnp: BKL removal
s390/block: kill the big kernel lock
hpet: kill BKL, add compat_ioctl
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (278 commits)
arm: remove machine_desc.io_pg_offst and .phys_io
arm: use addruart macro to establish debug mappings
arm: return both physical and virtual addresses from addruart
arm/debug: consolidate addruart macros for CONFIG_DEBUG_ICEDCC
ARM: make struct machine_desc definition coherent with its comment
eukrea_mbimxsd-baseboard: Pass the correct GPIO to gpio_free
cpuimx27: fix compile when ULPI is selected
mach-pcm037_eet: fix compile errors
Fixing ethernet driver compilation error for i.MX31 ADS board
cpuimx51: update board support
mx5: add cpuimx51sd module and its baseboard
iomux-mx51: fix GPIO_1_xx 's IOMUX configuration
imx-esdhc: update devices registration
mx51: add resources for SD/MMC on i.MX51
iomux-mx51: fix SD1 and SD2's iomux configuration
clock-mx51: rename CLOCK1 to CLOCK_CCGR for better readability
clock-mx51: factorize clk_set_parent and clk_get_rate
eukrea_mbimxsd: add support for DVI displays
cpuimx25 & cpuimx35: fix OTG port registration in host mode
i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472
...
The tracing per_cpu buffers were limited to 999 CPUs for a mear
savings in stack space of a char array. Up the array to 30 characters
which is more than enough to hold a 64 bit number.
Reported-by: Robin Holt <holt@sgi.com>
Suggested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With the binding of time extends to events we no longer need to use
the macro RB_TIMESTAMPS_PER_PAGE. Remove it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's a condition to check if we should add a time extend or
not in the fast path. But this condition is racey (in the sense
that we can add a unnecessary time extend, but nothing that
can break anything). We later check if the time or event time
delta should be zero or have real data in it (not racey), making
this first check redundant.
This check may help save space once in a while, but really is
not worth the hassle to try to save some space that happens at
most 134 ms at a time.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When the time between two timestamps is greater than
2^27 nanosecs (~134 ms) a time extend event is added that extends
the time difference to 59 bits (~18 years). This is due to
events only having a 27 bit field to store time.
Currently this time extend is a separate event. We add it just before
the event data that is being written to the buffer. But before
the event data is committed, the event data can also be discarded (as
with the case of filters). But because the time extend has already been
committed, it will stay in the buffer.
If lots of events are being filtered and no event is being
written, then every 134ms a time extend can be added to the buffer
without any data attached. To keep from filling the entire buffer
with time extends, a time extend will never be the first event
in a page because the page timestamp can be used. Time extends can
only fill the rest of a page with some data at the beginning.
This patch binds the time extend with the data. The difference here
is that the time extend is not committed before the data is added.
Instead, when a time extend is needed, the space reserved on
the ring buffer is the time extend + the data event size. The
time extend is added to the first part of the reserved block and
the data is added to the second. The time extend event is passed
back to the reserver, but since the reserver also uses a function
to find the data portion of the reserved block, no changes to the
ring buffer interface need to be made.
When a commit is discarded, we now remove both the time extend and
the event. With this approach no more than one time extend can
be in the buffer in a row. Data must always follow a time extend.
Thanks to Mathieu Desnoyers for suggesting this idea.
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The delta between events is passed to the timestamp code by reference
and the timestamp code will reset the value. But it can be reset
from the caller. No need to pass it in by reference.
By changing the call to pass by value, lets gcc optimize the code
a bit more where it can store the delta in a register and not
worry about updating the reference.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The original code for the ring buffer had locations that modified
the timestamp and that change was used by the callers. Now,
the timestamp is not reused by the callers and there is no reason
to pass it by reference.
By changing the call to pass by value, lets gcc optimize the code
a bit more where it can store the timestamp in a register and not
worry about updating the reference.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Gcc inlines the slow path of the ring buffer write which can
hurt performance. This patch simply forces the slow path function
rb_move_tail() to always be a function.
The ring_buffer_benchmark module with reader_disabled=1 shows that
this patch changes the time to record an event from 135 ns to
132 ns. (3 ns or 2.22% improvement)
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function start_func_tracer() was incorrectly added in the
#ifdef CONFIG_FUNCTION_TRACER condition, but is still used even
when function tracing is not enabled.
The calls to register_ftrace_function() and register_ftrace_graph()
become nops (and their arguments are even ignored), thus there is
no reason to hide start_func_tracer() when function tracing is
not enabled.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
According to Jens, this code does not need the BKL at all,
it is sufficiently serialized by bd_mutex.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Even though the parent is recorded with the normal function tracing
of the latency tracers (irqsoff and wakeup), the function graph
recording is bogus.
This is due to the function graph messing with the return stack.
The latency tracers pass in as the parent CALLER_ADDR0, which
works fine for plain function tracing. But this causes bogus output
with the graph tracer:
3) <idle>-0 | d.s3. 0.000 us | return_to_handler();
3) <idle>-0 | d.s3. 0.000 us | _raw_spin_unlock_irqrestore();
3) <idle>-0 | d.s3. 0.000 us | return_to_handler();
3) <idle>-0 | d.s3. 0.000 us | trace_hardirqs_on();
The "return_to_handle()" call is the trampoline of the
function graph tracer, and is meaningless in this context.
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The preempt and irqsoff tracers have three types of function tracers.
Normal function tracer, function graph entry, and function graph return.
Each of these use a complex dance to prevent recursion and whether
to trace the data or not (depending if interrupts are enabled or not).
This patch moves the duplicate code into a single routine, to
prevent future mistakes with modifying duplicate complex code.
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The wakeup tracer has three types of function tracers. Normal
function tracer, function graph entry, and function graph return.
Each of these use a complex dance to prevent recursion and whether
to trace the data or not (depending on the wake_task variable).
This patch moves the duplicate code into a single routine, to
prevent future mistakes with modifying duplicate complex code.
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add function graph support for wakeup latency tracer.
The graph output is enabled by setting the 'display-graph'
trace option.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1285243253-7372-4-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Move trace_graph_function() and print_graph_headers_flags() functions
to the trace_function_graph.c to be globaly available.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1285243253-7372-3-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The check_irq_entry and check_irq_return could be called
from graph event context. In such case there's no graph
private data allocated. Adding checks to handle this case.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <20100924154102.GB1818@jolsa.brq.redhat.com>
[ Fixed some grammar in the comments ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.
The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.
New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time. Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.
The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.
Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.
Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.
===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
// but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}
@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}
@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}
@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}
@ fops0 @
identifier fops;
@@
struct file_operations fops = {
...
};
@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
.llseek = llseek_f,
...
};
@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
.read = read_f,
...
};
@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
.write = write_f,
...
};
@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
.open = open_f,
...
};
// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
... .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};
@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
... .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};
// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
... .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};
// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};
// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};
@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+ .llseek = default_llseek, /* write accesses f_pos */
};
// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////
@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
.write = write_f,
.read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};
@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};
@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};
@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
The config option used by archs to let the build system know that
the C version of the recordmcount works for said arch is currently
called HAVE_C_MCOUNT_RECORD which enables BUILD_C_RECORDMCOUNT. To
be more consistent with the name that all archs may use, it has been
renamed to HAVE_C_RECORDMCOUNT. This will be less confusing since
we are building a C recordmcount and not a mcount_record.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Cc: <linux-arch@vger.kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kbuild@vger.kernel.org
Cc: John Reiser <jreiser@bitwagon.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch adds the support for the C version of recordmcount and
compile times show ~ 12% improvement.
After verifying this works, other archs can add:
HAVE_C_MCOUNT_RECORD
in its Kconfig and it will use the C version of recordmcount
instead of the perl version.
Cc: <linux-arch@vger.kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kbuild@vger.kernel.org
Cc: John Reiser <jreiser@bitwagon.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix
kernel/trace/trace_functions_graph.c: In function ‘trace_print_graph_duration’:
kernel/trace/trace_functions_graph.c:652: warning: comparison of distinct pointer types lacks a cast
when building 36-rc6 on a 32-bit due to the strict type check failing
in the min() macro.
Signed-off-by: Borislav Petkov <bp@alien8.de>
Cc: Chase Douglas <chase.douglas@canonical.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20100929080823.GA13595@liondog.tnic>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Time stamps for the ring buffer are created by the difference between
two events. Each page of the ring buffer holds a full 64 bit timestamp.
Each event has a 27 bit delta stamp from the last event. The unit of time
is nanoseconds, so 27 bits can hold ~134 milliseconds. If two events
happen more than 134 milliseconds apart, a time extend is inserted
to add more bits for the delta. The time extend has 59 bits, which
is good for ~18 years.
Currently the time extend is committed separately from the event.
If an event is discarded before it is committed, due to filtering,
the time extend still exists. If all events are being filtered, then
after ~134 milliseconds a new time extend will be added to the buffer.
This can only happen till the end of the page. Since each page holds
a full timestamp, there is no reason to add a time extend to the
beginning of a page. Time extends can only fill a page that has actual
data at the beginning, so there is no fear that time extends will fill
more than a page without any data.
When reading an event, a loop is made to skip over time extends
since they are only used to maintain the time stamp and are never
given to the caller. As a paranoid check to prevent the loop running
forever, with the knowledge that time extends may only fill a page,
a check is made that tests the iteration of the loop, and if the
iteration is more than the number of time extends that can fit in a page
a warning is printed and the ring buffer is disabled (all of ftrace
is also disabled with it).
There is another event type that is called a TIMESTAMP which can
hold 64 bits of data in the theoretical case that two events happen
18 years apart. This code has not been implemented, but the name
of this event exists, as well as the structure for it. The
size of a TIMESTAMP is 16 bytes, where as a time extend is only
8 bytes. The macro used to calculate how many time extends can fit on
a page used the TIMESTAMP size instead of the time extend size
cutting the amount in half.
The following test case can easily trigger the warning since we only
need to have half the page filled with time extends to trigger the
warning:
# cd /sys/kernel/debug/tracing/
# echo function > current_tracer
# echo 'common_pid < 0' > events/ftrace/function/filter
# echo > trace
# echo 1 > trace_marker
# sleep 120
# cat trace
Enabling the function tracer and then setting the filter to only trace
functions where the process id is negative (no events), then clearing
the trace buffer to ensure that we have nothing in the buffer,
then write to trace_marker to add an event to the beginning of a page,
sleep for 2 minutes (only 35 seconds is probably needed, but this
guarantees the bug), and then finally reading the trace which will
trigger the bug.
This patch fixes the typo and prevents the false positive of that warning.
Reported-by: Hans J. Koch <hjk@linutronix.de>
Tested-by: Hans J. Koch <hjk@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stable Kernel <stable@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Initialize the workqueue data structures *before* they are registered
so that they are ready for callbacks.
Signed-off-by: Jason Baron <jbaron@redhat.com>
LKML-Reference: <e3a3383fc370ac7086625bebe89d9480d7caf372.1284733808.git.jbaron@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The enums for FTRACE_ENABLE_MCOUNT and FTRACE_DISABLE_MCOUNT were
used as commands to ftrace_run_update_code(). But these commands
were used by the old nasty ftrace daemon that has long been slain.
This is a clean up patch to remove the references to these enums
and simplify the code a little.
Reported-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When the function graph tracer funcgraph-irq option is zero, disable
tracing in IRQs. This makes the option have two effects.
1) When reading the trace file, do not display the functions that
happen in interrupt context (when detected)
2) [*new*] When recording a trace, skip those that are detected
to be in interrupt by the 'in_irq()' function
Note, in_irq() is updated at irq_enter() and irq_exit(). There are
still functions that are recorded by the function graph tracer that
is in interrupt context but outside the irq_enter/exit() routines.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
It's handy to be able to disable the irq related output
and not to have to jump over each irq related code, when
you have no interrest in it.
The option is by default enabled, so there's no change to
current behaviour. It affects only the final output, so all
the irq related data stay in the ring buffer.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <20100907145344.GC1912@jolsa.brq.redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If we do:
# cd /sys/kernel/debug
# echo 'do_IRQ:traceon schedule:traceon sys_write:traceon' > \
set_ftrace_filter
# cat set_ftrace_filter
We get the following output:
#### all functions enabled ####
sys_write:traceon:unlimited
schedule:traceon:unlimited
do_IRQ:traceon:unlimited
This outputs two lists. One is the fact that all functions are
currently enabled for function tracing, the other has three probed
functions, which happen to have 'traceon' as their commands.
Currently, when reading the first list (functions enabled) the
seq_file code will receive a "NULL" from the t_next() function
causing it to exit early. This makes "read()" from userspace stop
reading the code at this boarder. Although read is allowed to do this,
some (broken) applications might consider this an end of file and
stop early.
This patch adds the start of the second list to t_next() when it
finishes the first list. It is a simple change and gives the
set_ftrace_filter file nicer reading ability.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch keeps track of the index within the elements of
set_ftrace_filter and if the position goes backwards, it nicely
resets and starts from the beginning again.
This allows for lseek and pread to work properly now.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The set_ftrace_filter uses seq_file and reads from two lists. The
pointer returned by t_next() can either be of type struct dyn_ftrace
or struct ftrace_func_probe. If there is a bug (there was one)
the wrong pointer may be used and the reference can cause an oops.
This patch makes t_next() and friends only return the iterator structure
which now has a pointer of type struct dyn_ftrace and struct
ftrace_func_probe. The t_show() can now test if the pointer is NULL or
not and if the pointer exists, it is guaranteed to be of the correct type.
Now if there's a bug, only wrong data will be shown but not an oops.
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
After the filtered functions are read, the probed functions are read
from the hash in set_ftrace_filter. When the hashed probed functions
are read, the *pos passed in is reset. Instead of modifying the pos
given to the read function, just record the pos where the filtered
functions ended and subtract from that.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: t_start: reset FTRACE_ITER_HASH in case of seek/pread
perf symbols: Fix multiple initialization of symbol system
perf: Fix CPU hotplug
perf, trace: Fix module leak
tracing/kprobe: Fix handling of C-unlike argument names
tracing/kprobes: Fix handling of argument names
perf probe: Fix handling of arguments names
perf probe: Fix return probe support
tracing/kprobe: Fix a memory leak in error case
tracing: Do not allow llseek to set_ftrace_filter
Be sure to avoid entering t_show() with FTRACE_ITER_HASH set without
having properly started the iterator to iterate the hash. This case is
degenerate and, as discovered by Robert Swiecki, can cause t_hash_show()
to misuse a pointer. This causes a NULL ptr deref with possible security
implications. Tracked as CVE-2010-3079.
Cc: Robert Swiecki <swiecki@google.com>
Cc: Eugene Teo <eugene@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Replace pmu::{enable,disable,start,stop,unthrottle} with
pmu::{add,del,start,stop}, all of which take a flags argument.
The new interface extends the capability to stop a counter while
keeping it scheduled on the PMU. We replace the throttled state with
the generic stopped state.
This also allows us to efficiently stop/start counters over certain
code paths (like IRQ handlers).
It also allows scheduling a counter without it starting, allowing for
a generic frozen state (useful for rotating stopped counters).
The stopped state is implemented in two different ways, depending on
how the architecture implemented the throttled state:
1) We disable the counter:
a) the pmu has per-counter enable bits, we flip that
b) we program a NOP event, preserving the counter state
2) We store the counter state and ignore all read/overflow events
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
gcc-4.6: kernel/*: Fix unused but set warnings
mutex: Fix annotations to include it in kernel-locking docbook
pid: make setpgid() system call use RCU read-side critical section
MAINTAINERS: Add RCU's public git tree
Check the argument name whether it is invalid (not C-like symbol name). This
makes event format simple.
Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
LKML-Reference: <20100827113912.22882.62313.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Set "argN" name for each argument automatically if it has no specified name.
Since dynamic trace event(kprobe_events) accepts special characters for its
argument, its format can show those special characters (e.g. '$', '%', '+').
However, perf can't parse those format because of the character (especially
'%') mess up the format. This sets "argX" name for those arguments if user
omitted the argument names.
E.g.
# echo 'p do_fork %ax IP=%ip $stack' > tracing/kprobe_events
# cat tracing/kprobe_events
p:kprobes/p_do_fork_0 do_fork arg1=%ax IP=%ip arg3=$stack
Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
LKML-Reference: <20100827113906.22882.59312.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix a memory leak which happens when a field name conflicts with others. In
error case, free_trace_probe() will free all arguments until nr_args, so this
increments nr_args the begining of the loop instead of the end.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
LKML-Reference: <20100827113846.22882.12670.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reading the file set_ftrace_filter does three things.
1) shows whether or not filters are set for the function tracer
2) shows what functions are set for the function tracer
3) shows what triggers are set on any functions
3 is independent from 1 and 2.
The way this file currently works is that it is a state machine,
and as you read it, it may change state. But this assumption breaks
when you use lseek() on the file. The state machine gets out of sync
and the t_show() may use the wrong pointer and cause a kernel oops.
Luckily, this will only kill the app that does the lseek, but the app
dies while holding a mutex. This prevents anyone else from using the
set_ftrace_filter file (or any other function tracing file for that matter).
A real fix for this is to rewrite the code, but that is too much for
a -rc release or stable. This patch simply disables llseek on the
set_ftrace_filter() file for now, and we can do the proper fix for the
next major release.
Reported-by: Robert Swiecki <swiecki@google.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Tavis Ormandy <taviso@google.com>
Cc: Eugene Teo <eugene@redhat.com>
Cc: vendor-sec@lst.de
Cc: <stable@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
No real bugs I believe, just some dead code.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: andi@firstfloor.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
With a new enough GCC, ARM function tracing can be supported without the
need for frame pointers. This is essential for Thumb-2 support, since
frame pointers aren't available then.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
While discussing the strictness of the 80 character limit on the
Kernel Summit Discussion mailing list, I showed examples that I
broke that limit slightly with some algorithms. In discussing with
John Linville, what looked better, I realized that two of the
80 char breaking culprits were an identical expression.
As a clean up, this patch moves the identical expression into its
own helper function and that is used instead. As a side effect,
the offending code is now under the 80 character limit. :-)
This clean up code also changes the expression from
(A - B) - C to A - (B + C)
This makes the code look a little nicer too.
Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
While we are reading trace_stat/functionX and someone just
disabled function_profile at that time, we can trigger this:
divide error: 0000 [#1] PREEMPT SMP
...
EIP is at function_stat_show+0x90/0x230
...
This fix just takes the ftrace_profile_lock and checks if
rec->counter is 0. If it's 0, we know the profile buffer
has been reset.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: stable@kernel.org
LKML-Reference: <4C723644.4040708@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Instead of hardcoding the number of contexts for the recursions
barriers, define a cpp constant to make the code more
self-explanatory.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Remove the nasty hack that marks a pointer's LSB to distinguish common
fields from event fields. Replace it with a more sane approach.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4C6A23C2.9020606@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Two new events were added that broke the current format output.
Both from the SCSI system: scsi_dispatch_cmd_done and scsi_dispatch_cmd_timeout
The reason is that their print_fmt exceeded a page size. Since the output
of the format used simple_read_from_buffer and trace_seq, it was limited
to a page size in output.
This patch converts the printing of the format of an event into seq_file,
which allows greater than a page size to be shown.
I diffed all event formats comparing the output with and without this
patch. All matched except for the above two, which showed just:
FORMAT TOO BIG
without this patch, but now properly displays the output with this patch.
v2: Remove updating *pos in seq start function.
[ Thanks to Li Zefan for pointing that out ]
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Kei Tokunaga <tokunaga.keiich@jp.fujitsu.com>
Cc: James Bottomley <James.Bottomley@suse.de>
Cc: Tomohiro Kusumi <kusumi.tomohiro@jp.fujitsu.com>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Secure discard is the same as discard except that all copies of the
discarded sectors (perhaps created by garbage collection) must also be
erased.
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ben Gardiner <bengardiner@nanometrics.ca>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits)
block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n
xen-blkfront: fix missing out label
blkdev: fix blkdev_issue_zeroout return value
block: update request stacking methods to support discards
block: fix missing export of blk_types.h
writeback: fix bad _bh spinlock nesting
drbd: revert "delay probes", feature is being re-implemented differently
drbd: Initialize all members of sync_conf to their defaults [Bugz 315]
drbd: Disable delay probes for the upcomming release
writeback: cleanup bdi_register
writeback: add new tracepoints
writeback: remove unnecessary init_timer call
writeback: optimize periodic bdi thread wakeups
writeback: prevent unnecessary bdi threads wakeups
writeback: move bdi threads exiting logic to the forker thread
writeback: restructure bdi forker loop a little
writeback: move last_active to bdi
writeback: do not remove bdi from bdi_list
writeback: simplify bdi code a little
writeback: do not lose wake-ups in bdi threads
...
Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and
drivers/scsi/scsi_error.c as per Jens.
* 'bkl/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing:
do_coredump: Do not take BKL
init: Remove the BKL from startup code
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (55 commits)
workqueue: mark init_workqueues() as early_initcall()
workqueue: explain for_each_*cwq_cpu() iterators
fscache: fix build on !CONFIG_SYSCTL
slow-work: kill it
gfs2: use workqueue instead of slow-work
drm: use workqueue instead of slow-work
cifs: use workqueue instead of slow-work
fscache: drop references to slow-work
fscache: convert operation to use workqueue instead of slow-work
fscache: convert object to use workqueue instead of slow-work
workqueue: fix how cpu number is stored in work->data
workqueue: fix mayday_mask handling on UP
workqueue: fix build problem on !CONFIG_SMP
workqueue: fix locking in retry path of maybe_create_worker()
async: use workqueue for worker pool
workqueue: remove WQ_SINGLE_CPU and use WQ_UNBOUND instead
workqueue: implement unbound workqueue
workqueue: prepare for WQ_UNBOUND implementation
libata: take advantage of cmwq and remove concurrency limitations
workqueue: fix worker management invocation without pending works
...
Fixed up conflicts in fs/cifs/* as per Tejun. Other trivial conflicts in
include/linux/workqueue.h, kernel/trace/Kconfig and kernel/workqueue.c
The blktrace driver currently needs the BKL, but
we should not need to take that in the block layer,
so just push it down into the driver itself.
It is quite likely that the BKL is not actually
required in blktrace code and could be removed
in a follow-on patch.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Remove the current bio flags and reuse the request flags for the bio, too.
This allows to more easily trace the type of I/O from the filesystem
down to the block driver. There were two flags in the bio that were
missing in the requests: BIO_RW_UNPLUG and BIO_RW_AHEAD. Also I've
renamed two request flags that had a superflous RW in them.
Note that the flags are in bio.h despite having the REQ_ name - as
blkdev.h includes bio.h that is the only way to go for now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Remove all the trivial wrappers for the cmd_type and cmd_flags fields in
struct requests. This allows much easier grepping for different request
types instead of unwinding through macros.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* 'timers-timekeeping-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
um: Fix read_persistent_clock fallout
kgdb: Do not access xtime directly
powerpc: Clean up obsolete code relating to decrementer and timebase
powerpc: Rework VDSO gettimeofday to prevent time going backwards
clocksource: Add __clocksource_updatefreq_hz/khz methods
x86: Convert common clocksources to use clocksource_register_hz/khz
timekeeping: Make xtime and wall_to_monotonic static
hrtimer: Cleanup direct access to wall_to_monotonic
um: Convert to use read_persistent_clock
timkeeping: Fix update_vsyscall to provide wall_to_monotonic offset
powerpc: Cleanup xtime usage
powerpc: Simplify update_vsyscall
time: Kill off CONFIG_GENERIC_TIME
time: Implement timespec_add
x86: Fix vtime/file timestamp inconsistencies
Trivial conflicts in Documentation/feature-removal-schedule.txt
Much less trivial conflicts in arch/powerpc/kernel/time.c resolved as
per Thomas' earlier merge commit 47916be4e2 ("Merge branch
'powerpc.cherry-picks' into timers/clocksource")
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (27 commits)
sched: Use correct macro to display sched_child_runs_first in /proc/sched_debug
sched: No need for bootmem special cases
sched: Revert nohz_ratelimit() for now
sched: Reduce update_group_power() calls
sched: Update rq->clock for nohz balanced cpus
sched: Fix spelling of sibling
sched, cpuset: Drop __cpuexit from cpu hotplug callbacks
sched: Fix the racy usage of thread_group_cputimer() in fastpath_timer_check()
sched: run_posix_cpu_timers: Don't check ->exit_state, use lock_task_sighand()
sched: thread_group_cputime: Simplify, document the "alive" check
sched: Remove the obsolete exit_state/signal hacks
sched: task_tick_rt: Remove the obsolete ->signal != NULL check
sched: __sched_setscheduler: Read the RLIMIT_RTPRIO value lockless
sched: Fix comments to make them DocBook happy
sched: Fix fix_small_capacity
powerpc: Exclude arch_sd_sibiling_asym_packing() on UP
powerpc: Enable asymmetric SMT scheduling on POWER7
sched: Add asymmetric group packing option for sibling domain
sched: Fix capacity calculations for SMT4
sched: Change nohz idle load balancing logic to push model
...
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (162 commits)
tracing/kprobes: unregister_trace_probe needs to be called under mutex
perf: expose event__process function
perf events: Fix mmap offset determination
perf, powerpc: fsl_emb: Restore setting perf_sample_data.period
perf, powerpc: Convert the FSL driver to use local64_t
perf tools: Don't keep unreferenced maps when unmaps are detected
perf session: Invalidate last_match when removing threads from rb_tree
perf session: Free the ref_reloc_sym memory at the right place
x86,mmiotrace: Add support for tracing STOS instruction
perf, sched migration: Librarize task states and event headers helpers
perf, sched migration: Librarize the GUI class
perf, sched migration: Make the GUI class client agnostic
perf, sched migration: Make it vertically scrollable
perf, sched migration: Parameterize cpu height and spacing
perf, sched migration: Fix key bindings
perf, sched migration: Ignore unhandled task states
perf, sched migration: Handle ignored migrate out events
perf: New migration tool overview
tracing: Drop cpparg() macro
perf: Use tracepoint_synchronize_unregister() to flush any pending tracepoint call
...
Fix up trivial conflicts in Makefile and drivers/cpufreq/cpufreq.c
With CONFIG_DEBUG_PAGEALLOC, I observed an unallocated memory access in
function_graph trace. It appears we find a small size entry in ring buffer,
but we access it as a big size entry. The access overflows the page size
and touches an unallocated page.
Cc: <stable@kernel.org>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
LKML-Reference: <1280217994.32400.76.camel@sli10-desk.sh.intel.com>
[ Added a comment to explain the problem - SDR ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In systems with more than one processor it is desirable to look at the
per cpu trace buffers.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
Add in a helper function to allow the kdb shell to dump the ftrace
buffer.
Modify trace.c to expose the capability to iterate over the ftrace
buffer in a read only capacity.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
Comment in unregister_trace_probe() says probe_lock will be held when it
gets called. However there is a case where it might called without the
probe_lock being held. Also since we are traversing the probe_list and
deleting an element from the probe_list, probe_lock should be held.
This was first pointed in uprobes traceevent review by Frederic
Weisbecker here. (http://lkml.org/lkml/2010/5/12/106)
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100630084548.GA10325@linux.vnet.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We use synchronize_sched() to ensure a tracepoint won't be called
while/after we release the perf buffers it references.
But the tracepoint API has its own API for that:
tracepoint_synchronize_unregister(). Use it instead as it's
self-explanatory and eases maintainance.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Now that all arches have been converted over to use generic time via
clocksources or arch_gettimeoffset(), we can remove the GENERIC_TIME
config option and simplify the generic code.
Signed-off-by: John Stultz <johnstul@us.ibm.com>
LKML-Reference: <1279068988-21864-4-git-send-email-johnstul@us.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We need to add one to the strlen() return because of the NULL
character. The type->name here generally comes from the kernel and I
don't think any of them come close to being MAX_TRACER_SIZE (100)
characters long so this is basically a cleanup.
Signed-off-by: Dan Carpenter <error27@gmail.com>
LKML-Reference: <20100710100644.GV19184@bicker>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Documentation/trace/ftrace.txt says
buffer_size_kb:
This sets or displays the number of kilobytes each CPU
buffer can hold. The tracer buffers are the same size
for each CPU. The displayed number is the size of the
CPU buffer and not total size of all buffers. The
trace buffers are allocated in pages (blocks of memory
that the kernel uses for allocation, usually 4 KB in size).
If the last page allocated has room for more bytes
than requested, the rest of the page will be used,
making the actual allocation bigger than requested.
( Note, the size may not be a multiple of the page size
due to buffer management overhead. )
This can only be updated when the current_tracer
is set to "nop".
But it's incorrect. currently total memory consumption is
'buffer_size_kb x CPUs x 2'.
Why two times difference is there? because ftrace implicitly allocate
the buffer for max latency too.
That makes sad result when admin want to use large buffer. (If admin
want full logging and makes detail analysis). example, If admin
have 24 CPUs machine and write 200MB to buffer_size_kb, the system
consume ~10GB memory (200MB x 24 x 2). umm.. 5GB memory waste is
usually unacceptable.
Fortunatelly, almost all users don't use max latency feature.
The max latency buffer can be disabled easily.
This patch shrink buffer size of the max latency buffer if
unnecessary.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
LKML-Reference: <20100701104554.DA2D.A69D9226@jp.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
__print_flags() and __print_symbolic() use percpu trace_seq:
1) Its memory is allocated at compile time, it wastes memory if we don't use tracing.
2) It is percpu data and it wastes more memory for multi-cpus system.
3) It disables preemption when it executes its core routine
"trace_seq_printf(s, "%s: ", #call);" and introduces latency.
So we move this trace_seq to struct trace_iterator.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4C078350.7090106@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Reorder structure to remove 8 bytes of padding on 64 bit builds.
This shrinks the size to 128 bytes so allowing allocation from a smaller
slab & needed one fewer cache lines.
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
LKML-Reference: <1269516456.2054.8.camel@localhost>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
We found that even enabling a single trace event that will rarely be
triggered can add big overhead to context switch.
(lmbench context switch test)
-------------------------------------------------
2p/0K 2p/16K 2p/64K 8p/16K 8p/64K 16p/16K 16p/64K
ctxsw ctxsw ctxsw ctxsw ctxsw ctxsw ctxsw
------ ------ ------ ------ ------ ------- -------
2.19 2.3 2.21 2.56 2.13 2.54 2.07
2.39 2.51 2.35 2.75 2.27 2.81 2.24
The overhead is 6% ~ 11%.
It's because when a trace event is enabled 3 tracepoints (sched_switch,
sched_wakeup, sched_wakeup_new) will be activated to map pid to cmdname.
We'd like to avoid this overhead, so add a trace option '(no)record-cmd'
to allow to disable cmdline recording.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4C2D57F4.2050204@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The default for llseek will change to no_llseek,
so the tracing debugfs files need to add explicit
.llseek assignments. Since we're dealing with regular
files from a VFS perspective, use generic_file_llseek.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: John Kacur <jkacur@redhat.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1278538820-1392-10-git-send-email-arnd@arndb.de>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Special traces type was only used by sysprof. Lets remove it now
that sysprof ftrace plugin has been dropped.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Soeren Sandmann <sandmann@daimi.au.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
The sysprof ftrace plugin doesn't seem to be seriously used
somewhere. There is a branch in the sysprof tree that makes
an interface to it, but the real sysprof tool uses either its
own module or perf events.
Drop the sysprof ftrace plugin then, as it's mostly useless.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Soeren Sandmann <sandmann@daimi.au.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
The ksym (breakpoint) ftrace plugin has been superseded by perf
tools that are much more poweful to use the cpu breakpoints.
This tracer doesn't bring more feature. It has been deprecated
for a while now, lets remove it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
I have shown by code review that no driver takes
the BKL at init time any more, so whatever the
init code was locking against is no longer there
and it is now safe to remove the BKL there.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Steven Rostedt <rostedt@goodmis>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Support string type tracing and printing in kprobe-tracer.
This allows user to trace string data in kernel including __user data. Note
that sometimes __user data may not be accessed if it is paged-out (sorry, but
kprobes operation should be done in atomic, we can not wait for page-in).
Commiter note: Fixed up conflicts with b7e2ece.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100519195724.2885.18788.stgit@localhost6.localdomain6>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Strip tracing code from workqueue and remove workqueue tracing. This
is temporary measure till concurrency managed workqueue is complete.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Because kprobes and syscalls need special processing to register
events, the class->reg() method was created to handle the differences.
But instead of creating a default ->reg for perf and ftrace events,
the code was scattered with:
if (class->reg)
class->reg();
else
default_reg();
This is messy and can also lead to bugs.
This patch cleans up this code and creates a default reg() entry for
the events allowing for the code to directly call the class->reg()
without the condition.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The nsecs_str string is a local variable defined as:
char nsecs_str[5];
It is possible for the snprintf call to use a size value larger than the
size of the string. This should not cause a buffer overrun as it is
written now due to the value for the string format "%03lu" can not be
larger than 1000. However, this change makes it correct. By making the
size correct we guard against potential future changes that could actually
cause a buffer overrun.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
LKML-Reference: <1276619355-18116-1-git-send-email-chase.douglas@canonical.com>
[ added 'UL' to number 8 to fix gcc warning comparing it to sizeof() ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
