This patch adds a module load parameter to enable probing of
non-standard LPC addresses 0x162e and 0x164e when scanning for supported
ISA chips.
Signed-Off-By: Juerg Haefliger <juergh at gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
This patch gets rid of a couple of macros previously used for sysfs attribute
generation and manipulation. This makes the source a little bigger but a lot
more readable and maintainable. It also fixes an issue with pwm5 & pwm6
attributes not being created read-only initially.
Signed-Off-By: Juerg Haefliger <juergh at gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
That's the userland thread register, so we should never try to change
it like this.
Based upon glibc bug nptl/6577 and suggestions by Jakub Jelinek.
Signed-off-by: David S. Miller <davem@davemloft.net>
The story is that what we used to do when we actually used
smp_report_regs() is that if you specifically only wanted to have the
current cpu's registers dumped you would call "__show_regs()"
otherwise you would call show_regs() which also invoked
smp_report_regs().
Now that we killed off smp_report_regs() there is no longer any
reason to have these two routines, just show_regs() is sufficient.
Also kill off a stray declaration of show_regs() in sparc64_ksym.c
Signed-off-by: David S. Miller <davem@davemloft.net>
Some of them use 'bool' and whatnot and therefore are not
kosher for userspace, so don't export them there.
Reported by Roland McGrath.
Signed-off-by: David S. Miller <davem@davemloft.net>
When rescheduling a bio in raid10, we wake up
the md thread, but if the array is frozen, this
will have no effect. This causes the array to
remain frozen for eternity. We add a wake_up
to allow the array to de-freeze. This code is
nearly identical to the raid1 code, which has
this fix already.
Signed-off-by: Arthur Jones <ajones@riverbed.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When support for multiple TX queues were added, the
netif_tx_lock() routines we converted to iterate over
all TX queues and grab each queue's spinlock.
This causes heartburn for lockdep and it's not a healthy
thing to do with lots of TX queues anyways.
So modify this to use a top-level lock and a "frozen"
state for the individual TX queues.
Signed-off-by: David S. Miller <davem@davemloft.net>
The mutex is released on a successful return, so it would seem that it
should be released on an error return as well.
The semantic patch finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@
expression l;
@@
mutex_lock(l);
... when != mutex_unlock(l)
when any
when strict
(
if (...) { ... when != mutex_unlock(l)
+ mutex_unlock(l);
return ...;
}
|
mutex_unlock(l);
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch fixes an oops that is reproduced when one races writes to a mmap-ed
region with another process truncating the file.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
As the fs recovery is asynchronous, there is a small chance that another
node can mount (and thus recover) the slot before the recovery thread
gets to it.
If this happens, the recovery thread will block indefinitely on the
journal/slot lock as that lock will be held for the duration of the mount
(by design) by the node assigned to that slot.
The solution implemented is to keep track of the journal replays using
a recovery generation in the journal inode, which will be incremented by the
thread replaying that journal. The recovery thread, before attempting the
blocking lock on the journal/slot lock, will compare the generation on disk
with what it has cached and skip recovery if it does not match.
This bug appears to have been inadvertently introduced during the mount/umount
vote removal by mainline commit 34d024f843. In the
mount voting scheme, the messaging would indirectly indicate that the slot
was being recovered.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch renames the ij_pad to ij_recovery_generation in struct ocfs2_dinode.
This will be used to keep count of journal replays after an unclean shutdown.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Sysfs has the _ATTR() and _ATTR_RO() macros to make defining extended
form attributes easier. configfs should have something similiar.
- _CONFIGFS_ATTR() and _CONFIGFS_ATTR_RO() are the counterparts to the
sysfs macros.
- CONFIGFS_ATTR_STRUCT() creates the extended form attribute structure.
- CONFIGFS_ATTR_OPS() defines the show_attribute()/store_attribute()
operations that call the show()/store() operations of the extended
form configfs_attributes.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
configfs_mkdir() creates a new item by calling its parent's
->make_item/group() functions. Once that object is created,
configfs_mkdir() calls try_module_get() on the new item's module. If it
succeeds, the module owning the new item cannot be unloaded, and
configfs is safe to reference the item.
If the item and the subsystem it belongs to are part of the same module,
the subsystem is also pinned. This is the common case.
However, if the subsystem is made up of multiple modules, this may not
pin the subsystem. Thus, it would be possible to unload the toplevel
subsystem module while there is still a child item. Thus, we now
try_module_get() the subsystem's module. This only really affects
children of the toplevel subsystem group. Deeper children already have
their parents pinned.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
When checking for user-created elements under an item to be removed by rmdir(),
configfs_detach_prep() counts fake configfs_dirents created by dir_open() as
user-created and fails when finding one. It is however perfectly valid to remove
a directory that is open.
Simply make configfs_detach_prep() skip fake configfs_dirent, like it already
does for attributes, and like detach_groups() does.
Signed-off-by: Louis Rilling <louis.rilling@kerlabs.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Once a new configfs directory is created by configfs_attach_item() or
configfs_attach_group(), a failure in the remaining initialization steps leads
to removing a directory which inode the VFS may have already accessed.
This commit adds the necessary inode locking to safely remove configfs
directories while cleaning up after a failure. As an advantage, the locking
rules of populate_groups() and detach_groups() become the same: the caller must
have the group's inode mutex locked.
Signed-off-by: Louis Rilling <louis.rilling@kerlabs.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
process 1: process 2:
configfs_mkdir("A")
attach_group("A")
attach_item("A")
d_instantiate("A")
populate_groups("A")
mutex_lock("A")
attach_group("A/B")
attach_item("A")
d_instantiate("A/B")
mkdir("A/B/C")
do_path_lookup("A/B/C", LOOKUP_PARENT)
ok
lookup_create("A/B/C")
mutex_lock("A/B")
ok
configfs_mkdir("A/B/C")
ok
attach_group("A/C")
attach_item("A/C")
d_instantiate("A/C")
populate_groups("A/C")
mutex_lock("A/C")
attach_group("A/C/D")
attach_item("A/C/D")
failure
mutex_unlock("A/C")
detach_groups("A/C")
nothing to do
mkdir("A/C/E")
do_path_lookup("A/C/E", LOOKUP_PARENT)
ok
lookup_create("A/C/E")
mutex_lock("A/C")
ok
configfs_mkdir("A/C/E")
ok
detach_item("A/C")
d_delete("A/C")
mutex_unlock("A")
detach_groups("A")
mutex_lock("A/B")
detach_group("A/B")
detach_groups("A/B")
nothing since no _default_ group
detach_item("A/B")
mutex_unlock("A/B")
d_delete("A/B")
detach_item("A")
d_delete("A")
Two bugs:
1/ "A/B/C" and "A/C/E" are created, but never removed while their parent are
removed in the end. The same could happen with symlink() instead of mkdir().
2/ "A" and "A/C" inodes are not locked while detach_item() is called on them,
which may probably confuse VFS.
This commit fixes 1/, tagging new directories with CONFIGFS_USET_CREATING before
building the inode and instantiating the dentry, and validating the whole
group+default groups hierarchy in a second pass by clearing
CONFIGFS_USET_CREATING.
mkdir(), symlink(), lookup(), and dir_open() simply return -ENOENT if
called in (or linking to) a directory tagged with CONFIGFS_USET_CREATING. This
does not prevent userspace from calling stat() successfuly on such directories,
but this prevents userspace from adding (children to | symlinking from/to |
read/write attributes of | listing the contents of) not validated items. In
other words, userspace will not interact with the subsystem on a new item until
the new item creation completes correctly.
It was first proposed to re-use CONFIGFS_USET_IN_MKDIR instead of a new
flag CONFIGFS_USET_CREATING, but this generated conflicts when checking the
target of a new symlink: a valid target directory in the middle of attaching
a new user-created child item could be wrongly detected as being attached.
2/ is fixed by next commit.
Signed-off-by: Louis Rilling <louis.rilling@kerlabs.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
On a similar pattern as mkdir() vs rmdir(), a failing symlink() may make rmdir()
fail for the symlink's parent and the symlink's target as well.
failing symlink() making target's rmdir() fail:
process 1: process 2:
symlink("A/S" -> "B")
allow_link()
create_link()
attach to "B" links list
rmdir("B")
detach_prep("B")
error because of new link
configfs_create_link("A", "S")
error (eg -ENOMEM)
failing symlink() making parent's rmdir() fail:
process 1: process 2:
symlink("A/D/S" -> "B")
allow_link()
create_link()
attach to "B" links list
configfs_create_link("A/D", "S")
make_dirent("A/D", "S")
rmdir("A")
detach_prep("A")
detach_prep("A/D")
error because of "S"
create("S")
error (eg -ENOMEM)
We cannot use the same solution as for mkdir() vs rmdir(), since rmdir() on the
target cannot wait on the i_mutex of the new symlink's parent without risking a
deadlock (with other symlink() or sys_rename()). Instead we define a global
mutex protecting all configfs symlinks attachment, so that rmdir() can avoid the
races above.
Signed-off-by: Louis Rilling <louis.rilling@kerlabs.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The rule for configfs symlinks is that symlinks always point to valid
config_items, and prevent the target from being removed. However,
configfs_symlink() only checks that it can grab a reference on the target item,
without ensuring that it remains alive until the symlink is correctly attached.
This patch makes configfs_symlink() fail whenever the target is being removed,
using the CONFIGFS_USET_DROPPING flag set by configfs_detach_prep() and
protected by configfs_dirent_lock.
This patch introduces a similar (weird?) behavior as with mkdir failures making
rmdir fail: if symlink() races with rmdir() of the parent directory (or its
youngest user-created ancestor if parent is a default group) or rmdir() of the
target directory, and then fails in configfs_create(), this can make the racing
rmdir() fail despite the concerned directory having no user-created entry (resp.
no symlink pointing to it or one of its default groups) in the end.
This behavior is fixed in later patches.
Signed-off-by: Louis Rilling <louis.rilling@kerlabs.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
We now use PTR_ERR() in the ->make_item() and ->make_group() operations.
Folks including configfs.h need err.h.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
It would have saved both a bug submitter and me a few hours if
scripts/ver_linux had picked the same gcc as the build.
Since I can't see any reason why it fiddles with PATH at all this patch
therefore removes the PATH setting.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Change the "If unsure" message to match the default value.
Signed-off-by: John Kacur <jkacur at gmail dot com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The extern flag currently is not included in type dump files
(genksyms --dump-types). Include that flag there for completeness.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
We are having two kinds of problems with genksyms today: fake checksum
changes without actual ABI changes, and changes which we would rather like
to ignore (such as an additional field at the end of a structure that
modules are not supposed to touch, for example).
I have thought about ways to improve genksyms and compute checksums
differently to avoid those problems, but in the end I don't see a
fundamentally better way. So here are some genksyms patches for at least
making the checksums more easily manageable, if we cannot fully fix them.
In addition to the bugfixes (the first two patches), this allows genksyms
to track checksum changes and report why a checksum changed (third patch),
and to selectively ignore changes (fourth patch).
This patch:
Gcc __attribute__ definitions may occur repeatedly, e.g.,
static int foo __attribute__((__used__))
__attribute__((aligned (16)));
The genksyms parser does not understand this, and generates a syntax error.
Fix this case.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The z10 system supports large pages, kvm-s390 doesnt.
Make sure that we dont advertise large pages to avoid the guest crashing as
soon as the guest kernel activates DAT.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
All the call sites are #if 0'd out and we have a much more
useful global cpu dumping facility these days. smp_report_regs()
is way too verbose to be usable.
Signed-off-by: David S. Miller <davem@davemloft.net>
It just clutters everything up and even though I wrote that hack I
can't remember having used it in the last 5 years or so.
Signed-off-by: David S. Miller <davem@davemloft.net>
Deleting a timer with del_timer doesn't guarantee, that the
timer function is not running at the moment of deletion. Thus
in the xt_hashlimit case we can get into a ticklish situation
when the htable_gc rearms the timer back and we'll actually
delete an entry with a pending timer.
Fix it with using del_timer_sync().
AFAIK del_timer_sync checks for the timer to be pending by
itself, so I remove the check.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The thing is that recent_mt_destroy first flushes the entries
from table with the recent_table_flush and only *after* this
removes the proc file, corresponding to that table.
Thus, if we manage to write to this file the '+XXX' command we
will leak some entries. If we manage to write there a 'clean'
command we'll race in two recent_table_flush flows, since the
recent_mt_destroy calls this outside the recent_lock.
The proper solution as I see it is to remove the proc file first
and then go on with flushing the table. This flushing becomes
safe w/o the lock, since the table is already inaccessible from
the outside.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to time out dead connections quicker, keep track of outstanding data
and cap the timeout.
Suggested by Herbert Xu.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The device id for Am29DL800BB in jedec_probe.c is wrong.
Reference: http://www.spansion.com/datasheets/21519c4.pdf
I discovered this while working with u-boot.
The u-boot folks mentioned Linux as an upstream reference, thought I'd
post a heads-up here too.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
- Add support for the RDC 1010 variant
- Rework the core library to have a read_id method. This allows the hacky
bits of it821x to go and prepares us for pata_hd
- Switch from WARN to BUG in ata_id_string as it will reboot if you get
it wrong so WARN won't be seen
- Allow the issue of command 0xFC on the 821x. This is needed to query
rebuild status.
- Tidy up printk formatting
- Do more ident rewriting on RAID volumes to handle firmware provided
ident data which is rather wonky
- Report the firmware revision and device layout in RAID mode
- Don't try and disable raid on the 8211 or RDC - they don't have the
relevant bits
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Subsys 106b:00a3 also is the weird apple ich8m which chokes when the
latter two ports are accessed, add it. Reported by Felipe Sere.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Felipe Sere <dodofxp@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Fix a potential memory leak when ata_init() encounters an error.
Signed-off-by: Elias Oltmanns <eo@nebensachen.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Global and per-LLD ATAPI disable checks were done in the command issue
path probably because it was left out during EH conversion. On
affected machines, this can cause lots of warning messages. Move them
to where they belong - the probing path.
Reported by Chunbo Luo.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Chunbo Luo <chunbo.luo@windriver.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Add flag VIA_SATA_PATA for vx800, VX800 uses the same
chipset(0x0581/0x5324) as CX700, which has 1 PATA channel(Master/Slave)
and 1 SATA channel(Master/Slave) Add function <via_ata_tf_load>. This is
to fix the internal bug of VIA chipsets, which will reset the device
register after changing the IEN bit in CTL register
Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Cc: Tejun Heo <tj@kernel.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
The ali_init_one() function does a search for an isa_bridge,
but then fails to release it if the revision information was
not correctly found.
the problem comes from:
isa_bridge = pci_get_device(...);
if (isa_bridge && ...) {
pci_dev_put(isa_bridge);
}
where the pci_dev_put() is never called if isa_bridge
was valid but the extra checks on the chip-revision
fail to match.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Record one more level of stack frame program counter.
Particularly when lockdep and all sorts of spinlock debugging is
enabled, figuring out the caller of spin_lock() is difficult when the
cpu is stuck on the lock.
Signed-off-by: David S. Miller <davem@davemloft.net>
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is necessary to set the dongle type on the nsc driver in order to get
it to work correctly. Thinkpads all appear to use dongle type 9. This
patch defaults nsc devices with an IBM PnP descriptor to use type 9.
Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Ben Collins <ben.collins@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Preface: The "Broadcom" device is on unreleased hardware, so I can't
disclose the actual model.
When the Dell 370 and 410 BT adapters are put into BT radio mode, they
need to be prepared like many other Broadcom adapters.
Also, add quirk Broadcom 2046 devices with HCI_RESET. Reference for this
bug: https://launchpad.net/bugs/249448
Signed-off-by: Michael Frey <michael.frey@canonical.com>
Signed-off-by: Mario Limonciello <Mario_Limonciello@Dell.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Ben Collins <ben.collins@canonical.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add drivers/video/console/promcon_tbl.c to the list of ignored files.
This file is generated by conmakehash against drivers/video/console/prom.uni.
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the packed attribute from PofTimStamp_tag in the hysdn driver as the
thing being packed is just an array of chars and so is unpackable.
This deals with a compiler warning:
In file included from drivers/isdn/hysdn/hysdn_boot.c:19:
drivers/isdn/hysdn/hysdn_pof.h:63: warning: 'packed' attribute ignored for field of type 'unsigned char[40]'
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adapt the tg3 driver to use the reworked PCI PM and make it use the
exported PCI PM core functions instead of accessing the PCI PM registers
directly by itself.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix direct casts of pointers to u32 in the InterPhase ATM driver. These are
all arguments being passed to printk() calls. So drop the cast and change the
%x to a %p.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix const assignment/discard warnings in the ATM networking driver.
The lane2_assoc_ind() function needed its arguments changing to match changes
in the lane2_ops struct (patch 61c33e0129
"atm: use const where reasonable").
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
