Commit graph

24 commits

Author SHA1 Message Date
Al Viro
04ce69093f [IPV6]: 'info' argument of ipv6 ->err_handler() is net-endian
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02 21:21:12 -08:00
Diego Beltrami
0a69452cb4 [XFRM]: BEET mode
This patch introduces the BEET mode (Bound End-to-End Tunnel) with as
specified by the ietf draft at the following link:

http://www.ietf.org/internet-drafts/draft-nikander-esp-beet-mode-06.txt

The patch provides only single family support (i.e. inner family =
outer family).

Signed-off-by: Diego Beltrami <diego.beltrami@gmail.com>
Signed-off-by: Miika Komu     <miika@iki.fi>
Signed-off-by: Herbert Xu     <herbert@gondor.apana.org.au>
Signed-off-by: Abhinav Pathak <abhinav.pathak@hiit.fi>
Signed-off-by: Jeff Ahrenholz <ahrenholz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-04 00:31:09 -07:00
Al Viro
a94cfd1974 [XFRM]: xfrm_state_lookup() annotations
spi argument of xfrm_state_lookup() is net-endian

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28 18:02:37 -07:00
Masahide NAKAMURA
aee5adb430 [XFRM] STATE: Add a hook to find offset to be inserted header in outbound.
On current kernel, ip6_find_1stfragopt() is used by IPv6 IPsec to find
offset to be inserted header in outbound for transport mode. (BTW, no
usage may be needed for IPv4 case.)  Mobile IPv6 requires another
logic for routing header and destination options header
respectively. This patch is common platform for the offset and adopts
it to IPsec.

Based on MIPL2 kernel patch.

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 15:06:36 -07:00
Masahide NAKAMURA
7e49e6de30 [XFRM]: Add XFRM_MODE_xxx for future use.
Transformation mode is used as either IPsec transport or tunnel.
It is required to add two more items, route optimization and inbound trigger
for Mobile IPv6.
Based on MIPL2 kernel patch.

This patch was also written by: Ville Nuorvala <vnuorval@tcs.hut.fi>

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 15:05:15 -07:00
Herbert Xu
e4d5b79c66 [CRYPTO] users: Use crypto_comp and crypto_has_*
This patch converts all users to use the new crypto_comp type and the
crypto_has_* functions.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-21 11:46:22 +10:00
Herbert Xu
da952315c9 [IPCOMP]: Fix truesize after decompression
The truesize check has uncovered the fact that we forgot to update truesize
after pskb_expand_head.  Unfortunately pskb_expand_head can't update it for
us because it's used in all sorts of different contexts, some of which would
not allow truesize to be updated by itself.

So the solution for now is to simply update it in IPComp.

This patch also changes skb_put to __skb_put since we've just expanded
tailroom by exactly that amount so we know it's there (but gcc does not).

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-12 13:58:55 -07:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Herbert Xu
364c6badde [NET]: Clean up skb_linearize
The linearisation operation doesn't need to be super-optimised.  So we can
replace __skb_linearize with __pskb_pull_tail which does the same thing but
is more general.

Also, most users of skb_linearize end up testing whether the skb is linear
or not so it helps to make skb_linearize do just that.

Some callers of skb_linearize also use it to copy cloned data, so it's
useful to have a new function skb_linearize_cow to copy the data if it's
either non-linear or cloned.

Last but not least, I've removed the gfp argument since nobody uses it
anymore.  If it's ever needed we can easily add it back.

Misc bugs fixed by this patch:

* via-velocity error handling (also, no SG => no frags)

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17 21:30:16 -07:00
Herbert Xu
31a4ab9302 [IPSEC] proto: Move transport mode input path into xfrm_mode_transport
Now that we have xfrm_mode objects we can move the transport mode specific
input decapsulation code into xfrm_mode_transport.  This removes duplicate
code as well as unnecessary header movement in case of tunnel mode SAs
since we will discard the original IP header immediately.

This also fixes a minor bug for transport-mode ESP where the IP payload
length is set to the correct value minus the header length (with extension
headers for IPv6).

Of course the other neat thing is that we no longer have to allocate
temporary buffers to hold the IP headers for ESP and IPComp.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17 21:28:41 -07:00
Alexey Dobriyan
4195f81453 [NET]: Fix "ntohl(ntohs" bugs
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-22 16:53:22 -07:00
KAMEZAWA Hiroyuki
6f91204225 [PATCH] for_each_possible_cpu: network codes
for_each_cpu() actually iterates across all possible CPUs.  We've had mistakes
in the past where people were using for_each_cpu() where they should have been
iterating across only online or present CPUs.  This is inefficient and
possibly buggy.

We're renaming for_each_cpu() to for_each_possible_cpu() to avoid this in the
future.

This patch replaces for_each_cpu with for_each_possible_cpu under /net

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:31 -07:00
Herbert Xu
e695633e21 [IPSEC]: Kill unused decap state argument
This patch removes the decap_state argument from the xfrm input hook.
Previously this function allowed the input hook to share state with
the post_input hook.  The latter has since been removed.

The only purpose for it now is to check the encap type.  However, it
is easier and better to move the encap type check to the generic
xfrm_rcv function.  This allows us to get rid of the decap state
argument altogether.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-01 00:52:46 -08:00
Herbert Xu
6abaaaae6d [IPSEC]: Fix tunnel error handling in ipcomp6
The error handling in ipcomp6_tunnel_create is broken in two ways:

1) If we fail to allocate an SPI (this should never happen in practice
since there are plenty of 32-bit SPI values for us to use), we will
still go ahead and create the SA.

2) When xfrm_init_state fails, we first of all may trigger the BUG_TRAP
in __xfrm_state_destroy because we didn't set the state to DEAD.  More
importantly we end up returning the freed state as if we succeeded!

This patch fixes them both.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-26 17:37:54 -08:00
Ingo Oeser
0c600eda4b [IPV6]: Nearly complete kzalloc cleanup for net/ipv6
Stupidly use kzalloc() instead of kmalloc()/memset()
everywhere where this is possible in net/ipv6/*.c .

Signed-off-by: Ingo Oeser <ioe-lkml@rameria.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 23:01:32 -08:00
Arjan van de Ven
4a3e2f711a [NET] sem2mutex: net/
Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:33:17 -08:00
Jesper Juhl
2b191befe2 [IPCOMP6]: don't check vfree() argument for NULL.
vfree does it's own NULL checking, so checking a pointer before
handing it to vfree is pointless.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 17:46:29 -08:00
Joe Perches
46b86a2da0 [NET]: Use NIP6_FMT in kernel.h
There are errors and inconsistency in the display of NIP6 strings.
	ie: net/ipv6/ip6_flowlabel.c

There are errors and inconsistency in the display of NIPQUAD strings too.
	ie: net/netfilter/nf_conntrack_ftp.c

This patch:
	adds NIP6_FMT to kernel.h
	changes all code to use NIP6_FMT
	fixes net/ipv6/ip6_flowlabel.c
	adds NIPQUAD_FMT to kernel.h
	fixes net/netfilter/nf_conntrack_ftp.c
	changes a few uses of "%u.%u.%u.%u" to NIPQUAD_FMT for symmetry to NIP6_FMT

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-13 14:29:07 -08:00
Arnaldo Carvalho de Melo
14c850212e [INET_SOCK]: Move struct inet_sock & helper functions to net/inet_sock.h
To help in reducing the number of include dependencies, several files were
touched as they were getting needed headers indirectly for stuff they use.

Thanks also to Alan Menegotto for pointing out that net/dccp/proto.c had
linux/dccp.h include twice.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03 13:11:21 -08:00
Jesper Juhl
a51482bde2 [NET]: kfree cleanup
From: Jesper Juhl <jesper.juhl@gmail.com>

This is the net/ part of the big kfree cleanup patch.

Remove pointless checks for NULL prior to calling kfree() in net/.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2005-11-08 09:41:34 -08:00
Jesper Juhl
573dbd9596 [CRYPTO]: crypto_free_tfm() callers no longer need to check for NULL
Since the patch to add a NULL short-circuit to crypto_free_tfm() went in,
there's no longer any need for callers of that function to check for NULL.
This patch removes the redundant NULL checks and also a few similar checks
for NULL before calls to kfree() that I ran into while doing the
crypto_free_tfm bits.

I've succesfuly compile tested this patch, and a kernel with the patch 
applied boots and runs just fine.

When I posted the patch to LKML (and other lists/people on Cc) it drew the
following comments :

 J. Bruce Fields commented
  "I've no problem with the auth_gss or nfsv4 bits.--b."

 Sridhar Samudrala said
  "sctp change looks fine."

 Herbert Xu signed off on the patch.

So, I guess this is ready to be dropped into -mm and eventually mainline.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-01 17:44:29 -07:00
Herbert Xu
6fc8b9e7c6 [IPCOMP]: Fix false smp_processor_id warning
This patch fixes a false-positive from debug_smp_processor_id().

The processor ID is only used to look up crypto_tfm objects.
Any processor ID is acceptable here as long as it is one that is
iterated on by for_each_cpu().

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-18 14:36:59 -07:00
Herbert Xu
72cb6962a9 [IPSEC]: Add xfrm_init_state
This patch adds xfrm_init_state which is simply a wrapper that calls
xfrm_get_type and subsequently x->type->init_state.  It also gets rid
of the unused args argument.

Abstracting it out allows us to add common initialisation code, e.g.,
to set family-specific flags.

The add_time setting in xfrm_user.c was deleted because it's already
set by xfrm_state_alloc.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: James Morris <jmorris@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-20 13:18:08 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00