Now that copy_to_user_page()/copy_from_user_page() are wired up, we
can drop the old __copy_xxx() implementations. Now that the page
colouring scheme has changed via kmap_coherent(), we can avoid the
flush in these specific helpers.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This moves copy_{to,from}_user_page() out-of-line on SH-4 and
converts for the kmap_coherent() API. Based on the MIPS
implementation.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
With the kmap_coherent() API in place, this is trivial to implement,
and lets us avoid the cache flush in certain cases.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The ST40 stuff in-tree hasn't built for some time, and hasn't been
updated for over 3 years. ST maintains their own out-of-tree changes
and rebases occasionally, and that's ultimately where all of the ST40
users go anyways.
In order for the ST40 code to be brought up to date most of the stuff
removed in this changeset would have to be rewritten anyways, so there's
very little benefit in keeping the remnants around either.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Currently these are only being exported for CONFIG_CPU_SH4. This
invariably breaks when building for an SH-3 that includes multiple
targets in multilib.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This was all reworked some time ago, the old debug_enter was ripped
out with everything going through a debug trap jump table instead.
Kill off the debug_enter target and reference kgdb_handle_exception
directly.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
SH-4A parts generally don't have any use for this, and it requires an
alternate implementation anyways. Leave this as an SH-4 only option,
as that's the only place this has been needed in the past.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
When uImage is made by using 'make uImage', zImage is used.
If zImage is used, the compression method need not be set.
However, it is set for "gzip" for a compression method.
I corrected to set "none".
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The common linux/ptrace.h already defines PTRACE_O_TRACESYSGOOD so there is no
need to have arches do it. This also keeps glibc-2.7 from breaking since it
has an enum for the PTRACE_O_* flags.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Since patch "fw-sbp2: use an own workqueue (fix system responsiveness)"
increased parallelism between fw-sbp2 and fw-core, it was possible that
fw-sbp2 didn't release the SCSI device when the FireWire device was
disconnected.
This happened if sbp2_update() ran during sbp2_login(), because a bus
reset occurred during sbp2_login(). The sbp2_login() work would [try
to] reschedule itself because it failed due to the bus reset, and it
would _not_ drop its reference on the target. However, sbp2_update()
would schedule sbp2_login() too before sbp2_login() rescheduled itself
and hence sbp2_update() would take an additional reference. And then
we would have one reference too many.
The fix is to _always_ drop the reference when leaving the sbp2_login()
work. If the sbp2_login() work reschedules itself, it takes a
reference, but only if it wasn't already rescheduled by sbp2_update().
Ditto in the sbp2_reconnect() work.
The resulting code is actually simpler than before: We _always_ take
a reference when successfully scheduling work. And we _always_ drop
a reference when leaving a workqueue job. No exceptions.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Clean up /proc/interrupts output on the system that has 10 or more
CPUs.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
When the CPE handler encounters too many CPEs (such as a solid single
bit memory error), it sets up a polling timer and disables the CPE
interrupt (to avoid excessive overhead logging the stream of single
bit errors). disable_irq_nosync() calls chip->disable() to provide
a chipset specifiec interface for disabling the interrupt. This patch
adds the Altix specific support to disable and re-enable the CPE interrupt.
Signed-off-by: Russ Anderson (rja@sgi.com)
Signed-off-by: Tony Luck <tony.luck@intel.com>
No need to print "McKinley Errata 9 workaround not needed; disabling it"
on every non-McKinley Itanium, which at this point is almost all of them.
Signed-off-by: Russ Anderson (rja@sgi.com)
Signed-off-by: Tony Luck <tony.luck@intel.com>
If you build the kernel `in-place' then do a git update, git
complains about arch/ia64/kernel/gate.lds being modified and
untracked.
Add that (generated) file to a .gitignore file.
Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
If another node unlinks the destination while ocfs2_rename() is waiting on a
cluster lock, ocfs2_rename() simply logs an error and continues. This causes
a crash because the renaming node is now trying to delete a non-existent
inode. The correct solution is to return -ENOENT.
Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
We should subtract start of our IO from PAGE_CACHE_SIZE to get the right
length of the write we want to perform.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
On file systems which don't support sparse files, Ocfs2_map_page_blocks()
was reading blocks on appending writes. This caused write performance to
suffer dramatically. Fix this by detecting an appending write on a nonsparse
fs and skipping the read.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
We're missing a meta data commit for extending sync writes. In thoery, write
could return with the meta data required to read the data uncommitted to
disk. Fix that by detecting an allocating write and forcing a journal commit
in the sync case.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Do this to avoid a theoretical (I haven't seen this in practice) race where
the downconvert thread might drop the dentry lock, allowing a remote unlink
to proceed before dropping the inode locks. This could bounce access to the
orphan dir between nodes.
There doesn't seem to be a need to do the same in ocfs2_dentry_iput() as
that's never called for the last ref drop from the downconvert thread.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
If we have not yet created a cluster lock, ocfs2_cluster_lock() will
first create it at NLMODE, and then convert the lock to either PRMODE or
EXMODE (whichever is requested).
Change ocfs2_cluster_lock() to just create the lock at the initially
requested level. ocfs2_locking_ast() handles this case fine, so the only
update required was in setup of locking state. This should reduce the number
of network messages required for a new lock by one, providing an incremental
performance enhancement.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
There is a section mismatch when building CONFIG_FLATMEM=y kernels
that also have CONFIG_HOTPLUG_CPU=y
WARNING: vmlinux.o(.text+0x5a902): Section mismatch: reference to \
.init.text:__alloc_bootmem (between 'per_cpu_init' and 'count_pages')
The issue occurs because per_cpu_init() in mm/contig.c is
marked __cpuinit (which is #define'd to nothing on a hot
plug cpu configuration) call __alloc_bootmem() (which is
an __init function). The usage is actually safe because
the __alloc_bootmem() is inside an "if (first_time)" test
so that the call is only made while it is still legal to
do so.
But the warning is irritating. Move the allocation to
find_memory().
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reported by Al Viro.
This fixes it:
[AC]FLAGS -> KBUILD_[AC]FLAGS conversion in Makefile-i386.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Not sizeof(ptr) ... we meant to say sizeof(*ptr).
Also moved the memset to the error path (the normal path overwrites
every field in the structure anyway) -Tony
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
The sizeof a pointer is constant, we want the sizeof what is pointed to.
Zero out 'sizeof(*efi_systab)' bytes of the efi_system_table_t pointer
'efi_systab' instead.
Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Tony Luck <tony.luck@intel.com>
New sanity checks in sysctl_check_table() complain about a couple
of mode 0755 that should be 0555 in the perfmon code:
sysctl table check failed: /kernel .1 Writable sysctl directory
sysctl table check failed: /kernel/perfmon Writable sysctl directory
Signed-off-by: Tony Luck <tony.luck@intel.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
9p: add missing end-of-options record for trans_fd
9p: return NULL when trans not found
9p: use copy of the options value instead of original
9p: fix memory leak in v9fs_get_sb
The list of options that the fd transport accepts is missing end-of-options
marker. This patch adds it.
Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Acked-by: Eric Van Hensbergen <ericvh@gmail.com>
v9fs_match_trans function returns arbitrary transport module instead of NULL
when the requested transport is not registered. This patch modifies the
function to return NULL in that case.
Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Acked-by: Eric Van Hensbergen <ericvh@gmail.com>
v9fs_parse_options function uses strsep which modifies the value of the
v9ses->options field. That modified value is later passed to the function
that creates the transport potentially making the transport creation
function to fail.
This patch creates a copy of v9ses->option field that v9fs_parse_options
function uses instead of the original value.
Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Acked-by: Eric Van Hensbergen <ericvh@gmail.com>
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
libata: handle broken cable reporting
pata_hpt37x: Fix outstanding bug reports on the HPT374 and 37x cable detect
ata_piix: Add additional PCI identifier for 40 wire short cable
pata_serverworks: Fix problem with some drive combinations
libata: Don't disable dipm with SET FEATURES
libata and bogus LBA48 drives
