khungtask by default monitors all tasks for long unterruptible sleep.
This change introduces a sysctl option, /proc/sys/kernel/
hung_task_selective_monitoring, to enable monitoring selected tasks.
If this sysctl option is enabled then only the tasks with
/proc/$PID/hang_detection_enabled set are to be monitored,
otherwise all tasks are monitored as default case.
Some tasks may intentionally moves to uninterruptable sleep state,
which shouldn't leads to khungtask panics, as those are recoverable
hungs. So to avoid false hung reports, add an option to select tasks
to be monitored and report/panic them only.
By default, enable the feature always to monitor selected tasks.
Change-Id: I48cd8cfe73dbe2b577541fe9607190eac5556bb2
Signed-off-by: Imran Khan <kimran@codeaurora.org>
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
[sramana: Resolved minor merge conflict]
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
[ Upstream commit a1c6ca3c6de763459a6e93b644ec6518c890ba1c ]
It is possible to observe hung_task complaints when system goes to
suspend-to-idle state:
# echo freeze > /sys/power/state
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.001 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
sd 0:0:0:0: [sda] Synchronizing SCSI cache
INFO: task bash:1569 blocked for more than 120 seconds.
Not tainted 4.19.0-rc3_+ #687
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
bash D 0 1569 604 0x00000000
Call Trace:
? __schedule+0x1fe/0x7e0
schedule+0x28/0x80
suspend_devices_and_enter+0x4ac/0x750
pm_suspend+0x2c0/0x310
Register a PM notifier to disable the detector on suspend and re-enable
back on wakeup.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 168e06f7937d96c7222037d8a05565e8a6eb00fe ]
Based on commit 401c636a0e ("kernel/hung_task.c: show all hung tasks
before panic"), we could get the call stack of hung task.
However, if the console loglevel is not high, we still can not see the
useful panic information in practice, and in most cases users don't set
console loglevel to high level.
This patch is to force console verbose before system panic, so that the
real useful information can be seen in the console, instead of being
like the following, which doesn't have hung task information.
INFO: task init:1 blocked for more than 120 seconds.
Tainted: G U W 4.19.0-quilt-2e5dc0ac-g51b6c21d76cc #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Kernel panic - not syncing: hung_task: blocked tasks
CPU: 2 PID: 479 Comm: khungtaskd Tainted: G U W 4.19.0-quilt-2e5dc0ac-g51b6c21d76cc #1
Call Trace:
dump_stack+0x4f/0x65
panic+0xde/0x231
watchdog+0x290/0x410
kthread+0x12c/0x150
ret_from_fork+0x35/0x40
reboot: panic mode set: p,w
Kernel Offset: 0x34000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
Link: http://lkml.kernel.org/r/27240C0AC20F114CBF8149A2696CBE4A6015B675@SHSMSX101.ccr.corp.intel.com
Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 304ae42739b108305f8d7b3eb3c1aec7c2b643a9 ]
check_hung_uninterruptible_tasks() is currently calling rcu_lock_break()
for every 1024 threads. But check_hung_task() is very slow if printk()
was called, and is very fast otherwise.
If many threads within some 1024 threads called printk(), the RCU grace
period might be extended enough to trigger RCU stall warnings.
Therefore, calling rcu_lock_break() for every some fixed jiffies will be
safer.
Link: http://lkml.kernel.org/r/1544800658-11423-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently task hung checking interval is equal to timeout, as the result
hung is detected anywhere between timeout and 2*timeout. This is fine for
most interactive environments, but this hurts automated testing setups
(syzbot). In an automated setup we need to strictly order CPU lockup <
RCU stall < workqueue lockup < task hung < silent loss, so that RCU stall
is not detected as task hung and task hung is not detected as silent
machine loss. The large variance in task hung detection timeout requires
setting silent machine loss timeout to a very large value (e.g. if task
hung is 3 mins, then silent loss need to be set to ~7 mins). The
additional 3 minutes significantly reduce testing efficiency because
usually we crash kernel within a minute, and this can add hours to bug
localization process as it needs to do dozens of tests.
Allow setting checking interval separately from timeout. This allows to
set timeout to, say, 3 minutes, but checking interval to 10 secs.
The interval is controlled via a new hung_task_check_interval_secs sysctl,
similar to the existing hung_task_timeout_secs sysctl. The default value
of 0 results in the current behavior: checking interval is equal to
timeout.
[akpm@linux-foundation.org: update hung_task_timeout_max's comment]
Link: http://lkml.kernel.org/r/20180611111004.203513-1-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we get a hung task it can often be valuable to see _all_ the hung
tasks on the system before calling panic().
Quoting from https://syzkaller.appspot.com/text?tag=CrashReport&id=5316056503549952
----------------------------------------
INFO: task syz-executor0:6540 blocked for more than 120 seconds.
Not tainted 4.16.0+ #13
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
syz-executor0 D23560 6540 4521 0x80000004
Call Trace:
context_switch kernel/sched/core.c:2848 [inline]
__schedule+0x8fb/0x1ef0 kernel/sched/core.c:3490
schedule+0xf5/0x430 kernel/sched/core.c:3549
schedule_preempt_disabled+0x10/0x20 kernel/sched/core.c:3607
__mutex_lock_common kernel/locking/mutex.c:833 [inline]
__mutex_lock+0xb7f/0x1810 kernel/locking/mutex.c:893
mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:908
lo_ioctl+0x8b/0x1b70 drivers/block/loop.c:1355
__blkdev_driver_ioctl block/ioctl.c:303 [inline]
blkdev_ioctl+0x1759/0x1e00 block/ioctl.c:601
ioctl_by_bdev+0xa5/0x110 fs/block_dev.c:2060
isofs_get_last_session fs/isofs/inode.c:567 [inline]
isofs_fill_super+0x2ba9/0x3bc0 fs/isofs/inode.c:660
mount_bdev+0x2b7/0x370 fs/super.c:1119
isofs_mount+0x34/0x40 fs/isofs/inode.c:1560
mount_fs+0x66/0x2d0 fs/super.c:1222
vfs_kern_mount.part.26+0xc6/0x4a0 fs/namespace.c:1037
vfs_kern_mount fs/namespace.c:2514 [inline]
do_new_mount fs/namespace.c:2517 [inline]
do_mount+0xea4/0x2b90 fs/namespace.c:2847
ksys_mount+0xab/0x120 fs/namespace.c:3063
SYSC_mount fs/namespace.c:3077 [inline]
SyS_mount+0x39/0x50 fs/namespace.c:3074
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
(...snipped...)
Showing all locks held in the system:
(...snipped...)
2 locks held by syz-executor0/6540:
#0: 00000000566d4c39 (&type->s_umount_key#49/1){+.+.}, at: alloc_super fs/super.c:211 [inline]
#0: 00000000566d4c39 (&type->s_umount_key#49/1){+.+.}, at: sget_userns+0x3b2/0xe60 fs/super.c:502 /* down_write_nested(&s->s_umount, SINGLE_DEPTH_NESTING); */
#1: 0000000043ca8836 (&lo->lo_ctl_mutex/1){+.+.}, at: lo_ioctl+0x8b/0x1b70 drivers/block/loop.c:1355 /* mutex_lock_nested(&lo->lo_ctl_mutex, 1); */
(...snipped...)
3 locks held by syz-executor7/6541:
#0: 0000000043ca8836 (&lo->lo_ctl_mutex/1){+.+.}, at: lo_ioctl+0x8b/0x1b70 drivers/block/loop.c:1355 /* mutex_lock_nested(&lo->lo_ctl_mutex, 1); */
#1: 000000007bf3d3f9 (&bdev->bd_mutex){+.+.}, at: blkdev_reread_part+0x1e/0x40 block/ioctl.c:192
#2: 00000000566d4c39 (&type->s_umount_key#50){.+.+}, at: __get_super.part.10+0x1d3/0x280 fs/super.c:663 /* down_read(&sb->s_umount); */
----------------------------------------
When reporting an AB-BA deadlock like shown above, it would be nice if
trace of PID=6541 is printed as well as trace of PID=6540 before calling
panic().
Showing hung tasks up to /proc/sys/kernel/hung_task_warnings could delay
calling panic() but normally there should not be so many hung tasks.
Link: http://lkml.kernel.org/r/201804050705.BHE57833.HVFOFtSOMQJFOL@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Mandeep Singh Baines <msb@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When I was running my testcase which may block hundreds of threads on fs
locks, I got lockup due to output from debug_show_all_locks() added by
commit b2d4c2edb2 ("locking/hung_task: Show all locks").
For example, if 1000 threads were blocked in TASK_UNINTERRUPTIBLE state
and 500 out of 1000 threads hold some lock, debug_show_all_locks() from
for_each_process_thread() loop will report locks held by 500 threads for
1000 times. This is a too much noise.
In order to make sure rcu_lock_break() is called frequently, we should
avoid calling debug_show_all_locks() from for_each_process_thread() loop
because debug_show_all_locks() effectively calls for_each_process_thread()
loop. Let's defer calling debug_show_all_locks() till before panic() or
leaving for_each_process_thread() loop.
Link: http://lkml.kernel.org/r/1489296834-60436-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/debug.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/signal.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since sysctl_hung_task_warnings == -1 is allowed (infinite warnings),
commit 48a6d64eda ("hung_task: allow hung_task_panic when
hung_task_warnings is 0") should decrement it only when it is not -1.
This prevents the kernel from ceasing warnings after the first
4294967295 ;)
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: John Siddle <jsiddle@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Previously hung_task_panic would not be respected if enabled after
hung_task_warnings had already been decremented to 0.
Permit the kernel to panic if hung_task_panic is enabled after
hung_task_warnings has already been decremented to 0 and another task
hangs for hung_task_timeout_secs seconds.
Check if hung_task_panic is enabled so we don't return prematurely, and
check if hung_task_warnings is non-zero so we don't print the warning
unnecessarily.
[akpm@linux-foundation.org: fix off-by-one]
Link: http://lkml.kernel.org/r/1473450214-4049-1-git-send-email-jsiddle@redhat.com
Signed-off-by: John Siddle <jsiddle@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we get a hung task it can often be valuable to see _all_ the held
locks on the system (in case we are being blocked on trying to acquire
one), e.g. with this patch we can immediately see where the problem is
below:
INFO: task trinity-c3:14933 blocked for more than 120 seconds.
Not tainted 4.8.0-rc1+ #135
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
trinity-c3 D ffff88010c16fc88 0 14933 1 0x00080004
ffff88010c16fc88 000000003b9aca00 0000000000000000 0000000000000296
00000000776cdf88 ffff88011a520ae0 ffff88011a520b08 ffff88011a520198
ffffffff867d7f00 ffff88011942c080 ffff880116841580 ffff88010c168000
Call Trace:
[<ffffffff845e9d37>] schedule+0x77/0x230
[<ffffffff833cb8b9>] __lock_sock+0x129/0x250
[<ffffffff833cb790>] ? __sk_destruct+0x450/0x450
[<ffffffff81408ac0>] ? wake_bit_function+0x2e0/0x2e0
[<ffffffff833d832b>] lock_sock_nested+0xeb/0x120
[<ffffffff83bad815>] irda_setsockopt+0x65/0xb40
[<ffffffff833c6c09>] SyS_setsockopt+0x139/0x230
[<ffffffff833c6ad0>] ? SyS_recv+0x20/0x20
[<ffffffff81004660>] ? trace_event_raw_event_sys_enter+0xb90/0xb90
[<ffffffff823c7023>] ? __this_cpu_preempt_check+0x13/0x20
[<ffffffff8162ee60>] ? __context_tracking_exit.part.3+0x30/0x1b0
[<ffffffff833c6ad0>] ? SyS_recv+0x20/0x20
[<ffffffff81007bd3>] do_syscall_64+0x1b3/0x4b0
[<ffffffff845f84aa>] entry_SYSCALL64_slow_path+0x25/0x25
Showing all locks held in the system:
2 locks held by khungtaskd/563:
#0: (rcu_read_lock){......}, at: [<ffffffff81534ce6>] watchdog+0x106/0x910
#1: (tasklist_lock){......}, at: [<ffffffff8141b3c4>] debug_show_all_locks+0x74/0x360
1 lock held by trinity-c0/19280:
#0: (sk_lock-AF_IRDA){......}, at: [<ffffffff83bab7c6>] irda_accept+0x176/0x10f0
1 lock held by trinity-c0/12865:
#0: (sk_lock-AF_IRDA){......}, at: [<ffffffff83bab7c6>] irda_accept+0x176/0x10f0
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mandeep Singh Baines <msb@chromium.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1471538460-7505-1-git-send-email-vegard.nossum@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When new timeout is written to /proc/sys/kernel/hung_task_timeout_secs,
khungtaskd is interrupted and again sleeps for full timeout duration.
This means that hang task will not be checked if new timeout is written
periodically within old timeout duration and/or checking of hang task
will be delayed for up to previous timeout duration. Fix this by
remembering last time khungtaskd checked hang task.
This change will allow other watchdog tasks (if any) to share khungtaskd
by sleeping for minimal timeout diff of all watchdog tasks. Doing more
watchdog tasks from khungtaskd will reduce the possibility of printk()
collisions by multiple watchdog threads.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In check_hung_uninterruptible_tasks() avoid the use of deprecated
while_each_thread().
The "max_count" logic will prevent a livelock - see commit 0c740d0a
("introduce for_each_thread() to replace the buggy while_each_thread()").
Having said this let's use for_each_process_thread().
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dave Wysochanski <dwysocha@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sysctl_hung_task_panic has been changed to unsigned int. use kstrtouint
instead of obsolete simple_strtoul
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Code that is obj-y (always built-in) or dependent on a bool Kconfig
(built-in or absent) can never be modular. So using module_init as an
alias for __initcall can be somewhat misleading.
Fix these up now, so that we can relocate module_init from init.h into
module.h in the future. If we don't do this, we'd have to add module.h
to obviously non-modular code, and that would be a worse thing.
The audit targets the following module_init users for change:
kernel/user.c obj-y
kernel/kexec.c bool KEXEC (one instance per arch)
kernel/profile.c bool PROFILING
kernel/hung_task.c bool DETECT_HUNG_TASK
kernel/sched/stats.c bool SCHEDSTATS
kernel/user_namespace.c bool USER_NS
Note that direct use of __initcall is discouraged, vs. one of the
priority categorized subgroups. As __initcall gets mapped onto
device_initcall, our use of subsys_initcall (which makes sense for these
files) will thus change this registration from level 6-device to level
4-subsys (i.e. slightly earlier). However no observable impact of that
difference has been observed during testing.
Also, two instances of missing ";" at EOL are fixed in kexec.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When khungtaskd detects hung tasks, it prints out
backtraces from a number of those tasks.
Limiting the number of backtraces being printed
out can result in the user not seeing the information
necessary to debug the issue. The hung_task_warnings
sysctl controls this feature.
This patch makes it possible for hung_task_warnings
to accept a special value to print an unlimited
number of backtraces when khungtaskd detects hung
tasks.
The special value is -1. To use this value it is
necessary to change types from ulong to int.
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: oleg@redhat.com
Link: http://lkml.kernel.org/r/1390239253-24030-3-git-send-email-atomlin@redhat.com
[ Build warning fix. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
side: the HV and emulation flavors can now coexist in a single kernel
is probably the most interesting change from a user point of view.
On the x86 side there are nested virtualization improvements and a
few bugfixes. ARM got transparent huge page support, improved
overcommit, and support for big endian guests.
Finally, there is a new interface to connect KVM with VFIO. This
helps with devices that use NoSnoop PCI transactions, letting the
driver in the guest execute WBINVD instructions. This includes
some nVidia cards on Windows, that fail to start without these
patches and the corresponding userspace changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=rWNf
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM changes from Paolo Bonzini:
"Here are the 3.13 KVM changes. There was a lot of work on the PPC
side: the HV and emulation flavors can now coexist in a single kernel
is probably the most interesting change from a user point of view.
On the x86 side there are nested virtualization improvements and a few
bugfixes.
ARM got transparent huge page support, improved overcommit, and
support for big endian guests.
Finally, there is a new interface to connect KVM with VFIO. This
helps with devices that use NoSnoop PCI transactions, letting the
driver in the guest execute WBINVD instructions. This includes some
nVidia cards on Windows, that fail to start without these patches and
the corresponding userspace changes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (146 commits)
kvm, vmx: Fix lazy FPU on nested guest
arm/arm64: KVM: PSCI: propagate caller endianness to the incoming vcpu
arm/arm64: KVM: MMIO support for BE guest
kvm, cpuid: Fix sparse warning
kvm: Delete prototype for non-existent function kvm_check_iopl
kvm: Delete prototype for non-existent function complete_pio
hung_task: add method to reset detector
pvclock: detect watchdog reset at pvclock read
kvm: optimize out smp_mb after srcu_read_unlock
srcu: API for barrier after srcu read unlock
KVM: remove vm mmap method
KVM: IOMMU: hva align mapping page size
KVM: x86: trace cpuid emulation when called from emulator
KVM: emulator: cleanup decode_register_operand() a bit
KVM: emulator: check rex prefix inside decode_register()
KVM: x86: fix emulation of "movzbl %bpl, %eax"
kvm_host: typo fix
KVM: x86: emulate SAHF instruction
MAINTAINERS: add tree for kvm.git
Documentation/kvm: add a 00-INDEX file
...
In certain occasions it is possible for a hung task detector
positive to be false: continuation from a paused VM, for example.
Add a method to reset detection, similar as is done
with other kernel watchdogs.
Acked-by: Don Zickus <dzickus@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Currently check_hung_task() prints a warning if it detects the
problem, but it is not convenient to watch the system logs if
user-space wants to be notified about the hang.
Add the new trace_sched_process_hang() into check_hung_task(),
this way a user-space monitor can easily wait for the hang and
potentially resolve a problem.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Dave Sullivan <dsulliva@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20131019161828.GA7439@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As 'sysctl_hung_task_check_count' is 'unsigned long' when this
value is assigned to max_count in check_hung_uninterruptible_tasks(),
it's truncated to 'int' type.
This causes a minor artifact: if we write 2^32 to sysctl.hung_task_check_count,
hung task detection will be effectively disabled.
With this fix, it will still truncate the user input to 32 bits, but
reading sysctl.hung_task_check_count reflects the actual truncated value.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/523FFF4E.9050401@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
printk(KERN_ERR) from check_hung_task() likely means we have a bug,
but unlike BUG_ON()/WARN_ON ()it doesn't show the kernel version,
this complicates the bug-reports investigation.
Add the additional pr_err() to print tainted/release/version
like dump_stack_print_info() does, the output becomes:
INFO: task perl:504 blocked for more than 2 seconds.
Not tainted 3.11.0-rc1-10367-g136bb46-dirty #1763
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
...
While at it, turn the old printk's into pr_err().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: ahecox@redhat.com
Cc: Christopher Williams <cww@redhat.com>
Cc: dwysocha@redhat.com
Cc: gavin@redhat.com
Cc: Mandeep Singh Baines <msb@chromium.org>
Cc: nshi@redhat.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20130801165941.GA17544@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Send an NMI to all CPUs when a hung task is detected and the hung
task code is configured to panic. This gives us a fairly uptodate
snapshot of all CPUs in the system.
This lets us get stack trace of all CPUs which makes life easier
trying to debug a deadlock, and the NMI doesn't change anything
since the next step is a kernel panic.
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1331848040-1676-1-git-send-email-levinsasha928@gmail.com
[ extended the changelog a bit ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
check_hung_uninterruptible_tasks()->rcu_lock_break() introduced by
"softlockup: check all tasks in hung_task" commit ce9dbe24 looks
absolutely wrong.
- rcu_lock_break() does put_task_struct(). If the task has exited
it is not safe to even read its ->state, nothing protects this
task_struct.
- The TASK_DEAD checks are wrong too. Contrary to the comment, we
can't use it to check if the task was unhashed. It can be unhashed
without TASK_DEAD, or it can be valid with TASK_DEAD.
For example, an autoreaping task can do release_task(current)
long before it sets TASK_DEAD in do_exit().
Or, a zombie task can have ->state == TASK_DEAD but release_task()
was not called, and in this case we must not break the loop.
Change this code to check pid_alive() instead, and do this before we drop
the reference to the task_struct.
Note: while_each_thread() under rcu_read_lock() is not really safe, it can
livelock. This will be fixed later, but fortunately in this case the
"max_count" logic saves us anyway.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Mandeep Singh Baines <msb@google.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
vfork parent uninterruptibly and unkillably waits for its child to
exec/exit. This wait is of unbounded length. Ignore such waits
in the hung_task detector.
Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Reported-by: Sasha Levin <levinsasha928@gmail.com>
LKML-Reference: <1325344394.28904.43.camel@lappy>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The changed files were only including linux/module.h for the
EXPORT_SYMBOL infrastructure, and nothing else. Revector them
onto the isolated export header for faster compile times.
Nothing to see here but a whole lot of instances of:
-#include <linux/module.h>
+#include <linux/export.h>
This commit is only changing the kernel dir; next targets
will probably be mm, fs, the arch dirs, etc.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
This patch allows the default value for sysctl_hung_task_timeout_secs
to be set at build time. The feature carries virtually no overhead,
so it makes sense to keep it enabled. On heavily loaded systems, though,
it can end up triggering stack traces when there is no bug other than
the system being underprovisioned. We use this patch to keep the hung task
facility available but disabled at boot-time.
The default of 120 seconds is preserved. As a note, commit e162b39a may
have accidentally reverted commit fb822db4, which raised the default from
120 seconds to 480 seconds.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Acked-by: Mandeep Singh Baines <msb@google.com>
Link: http://lkml.kernel.org/r/4DB8600C.8080000@suse.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This fixes a minor grammar problem in the comments in
hung_task.c
Signed-off-by: John Kacur <jkacur@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1281021054-4228-2-git-send-email-jkacur@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There is no longer any functional difference between
__debug_show_held_locks() and debug_show_held_locks(),
so remove the former.
Signed-off-by: John Kacur <jkacur@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1281021054-4228-1-git-send-email-jkacur@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
I'm seeing spikes of up to 0.5ms in khungtaskd on a large
machine. To reduce this source of jitter I tried setting
hung_task_check_count to 0:
# echo 0 > /proc/sys/kernel/hung_task_check_count
which didn't have the intended response. Change to a post
increment of max_count, so a value of 0 means check 0 tasks.
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: msb@google.com
LKML-Reference: <20091127022820.GU32182@kryten>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It's unused.
It isn't needed -- read or write flag is already passed and sysctl
shouldn't care about the rest.
It _was_ used in two places at arch/frv for some reason.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we check if a task has been switched out since the last scan, we might
have a race condition on the following scenario:
- the task is freshly created and scheduled
- it puts its state to TASK_UNINTERRUPTIBLE and is not yet switched out
- check_hung_task() scans this task and will report a false positive because
t->nvcsw + t->nivcsw == t->last_switch_count == 0
Add a check for such cases.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Mandeep Singh Baines <msb@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: saves sizeof(long) bytes per task_struct
By guaranteeing that sysctl_hung_task_timeout_secs have elapsed between
tasklist scans we can avoid using timestamps.
Signed-off-by: Mandeep Singh Baines <msb@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since the tasklist is protected by rcu list operations, it is safe
to convert the read_lock()s to rcu_read_lock().
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mandeep Singh Baines <msb@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: extend the scope of hung-task checks
Changed the default value of hung_task_check_count to PID_MAX_LIMIT.
hung_task_batch_count added to put an upper bound on the critical
section. Every hung_task_batch_count checks, the rcu lock is never
held for a too long time.
Keeping the critical section small minimizes time preemption is disabled
and keeps rcu grace periods small.
To prevent following a stale pointer, get_task_struct is called on g and t.
To verify that g and t have not been unhashed while outside the critical
section, the task states are checked.
The design was proposed by Frédéric Weisbecker.
Signed-off-by: Mandeep Singh Baines <msb@google.com>
Suggested-by: Frédéric Weisbecker <fweisbec@gmail.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix potential false panic
A potential race exists if sysctl_hung_task_timeout_secs is reset to 0
while inside check_hung_uniterruptible_tasks(). If check_task() is
entered, a comparison with 0 will result in a false hung_task being
detected.
If sysctl_hung_task_panic is set, the system will panic.
Signed-off-by: Mandeep Singh Baines <msb@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Decoupling allows:
* hung tasks check to happen at very low priority
* hung tasks check and softlockup to be enabled/disabled independently
at compile and/or run-time
* individual panic settings to be enabled disabled independently
at compile and/or run-time
* softlockup threshold to be reduced without increasing hung tasks
poll frequency (hung task check is expensive relative to softlock watchdog)
* hung task check to be zero over-head when disabled at run-time
Signed-off-by: Mandeep Singh Baines <msb@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
