commit 904df64a5f4d5ebd670801d869ca0a6d6a6e8df6 upstream.
Sometimes re-plugging a USB device during system sleep renders the device
useless:
[ 173.418345] xhci_hcd 0000:00:14.0: Get port status 2-4 read: 0x14203e2, return 0x10262
...
[ 176.496485] usb 2-4: Waited 2000ms for CONNECT
[ 176.496781] usb usb2-port4: status 0000.0262 after resume, -19
[ 176.497103] usb 2-4: can't resume, status -19
[ 176.497438] usb usb2-port4: logical disconnect
Because PLS equals to XDEV_RESUME, xHCI driver reports U3 to usbcore,
despite of CAS bit is flagged.
So proritize CAS over XDEV_RESUME to let usbcore handle warm-reset for
the port.
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200821091549.20556-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0077b1b2c8d9ad5f7a08b62fb8524cdb9938388f upstream.
dci is 0 based and xhci_get_ep_ctx() will do ep index increment to get
the ep context.
[rename dci to ep_index -Mathias]
Cc: stable <stable@vger.kernel.org> # v4.15+
Fixes: 02b6fdc2a1 ("usb: xhci: Add debugfs interface for xHCI driver")
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200821091549.20556-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 531412492ce93ea29b9ca3b4eb5e3ed771f851dd upstream.
lvs_rh_probe() can return some nonnegative value from usb_control_msg()
when it is less than "USB_DT_HUB_NONVAR_SIZE + 2" that is considered as
a failure. Make lvs_rh_probe() return -EINVAL in this case.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200805090643.3432-1-novikov@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 07c8434150f4eb0b65cae288721c8af1080fde17 ]
If a memory allocation fails within a 'usb_ep_alloc_request()' call, the
already allocated memory must be released.
Fix a mix-up in the code and free the correct requests.
Fixes: c52661d60f ("usb-gadget: Initial merge of target module for UASP + BOT")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b53a19284f537168fb506f2f40d7fda40a01162 ]
The char buffer buf, receives data directly from user space,
so its content might be negative and its elements are left
shifted to form an unsigned integer.
Since left shifting a negative value is undefined behavior, thus
change the char to u8 to elimintate this UB.
Signed-off-by: Changming Liu <charley.ashbringer@gmail.com>
Link: https://lore.kernel.org/r/20200711043018.928-1-charley.ashbringer@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Consider a case where the device has initiated dr_swap to
the connected PD charger to support type-C headset and charging
concurrently. If the charger got disconnected at the same time
when the driver was trying to change the data role then
send_dr_swap flag will be set during disconnect. Upon next connect,
since the flag is already set, the driver will not set the current_pr
to sink and the PD state machine will not kick in causing the charger
to be detected as DCP. Fix this by resetting the pd protocol during
cable disconnect which will clear the flags.
Change-Id: I282986b9d6df37a74d65eb80c1ebc5510add7fe9
Signed-off-by: Pratham Pratap <prathampratap@codeaurora.org>
For 8nm zero value is treated as a valid efuse value and
driver should honor this efuse value to update the tune
params. This change makes the updation of tune value possible
even if the efuse value is zero.
Change-Id: I6eac2e2414bf61b89aa41bebbfe56ad10017969e
Signed-off-by: Pratham Pratap <prathampratap@codeaurora.org>
A request may not be completed because not all the TRBs are prepared for
it. This happens when we run out of available TRBs. When some TRBs are
completed, the driver needs to prepare the rest of the TRBs for the
request. The check dwc3_gadget_ep_request_completed() shouldn't be
checking the amount of data received but rather the number of pending
TRBs. Revise this request completion check.
Change-Id: If806e69c32a84caa0c839286a33ee0b092cd372a
Cc: stable@vger.kernel.org
Fixes: e0c42ce590 ("usb: dwc3: gadget: simplify IOC handling")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Git-commit: 49e0590e3a60e75b493e5df879e216e5073c7663
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Udipto Goswami <ugoswami@codeaurora.org>
'Commit 145c3d9be206 ("usb: u_ether: Prevent dropping multicast
packet in rmnet ip mode")' removed skb check from eth_start_xmit
function. While ndo_start_xmit are typically expected never to be
called with NULL SKBs, for NCM function this xmit function is
called with NULL SKB initially which then uses the 'wrap' routine
to create valid SKBs. But this null SKB is getting dereferenced
before 'wrap' routine could run on it when in ethernet mode.
Fix this by bringing in the skb check.
Change-Id: I9d40f70190eb91ecc848b71c4ce31a656c60a28d
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
-----BEGIN PGP SIGNATURE-----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=Txdz
-----END PGP SIGNATURE-----
Merge 4.19.141 into android-4.19-stable
Changes in 4.19.141
smb3: warn on confusing error scenario with sec=krb5
genirq/affinity: Make affinity setting if activated opt-in
PCI: hotplug: ACPI: Fix context refcounting in acpiphp_grab_context()
PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken
PCI: Add device even if driver attach failed
PCI: qcom: Define some PARF params needed for ipq8064 SoC
PCI: qcom: Add support for tx term offset for rev 2.1.0
PCI: Probe bridge window attributes once at enumeration-time
btrfs: free anon block device right after subvolume deletion
btrfs: don't allocate anonymous block device for user invisible roots
btrfs: ref-verify: fix memory leak in add_block_entry
btrfs: don't traverse into the seed devices in show_devname
btrfs: open device without device_list_mutex
btrfs: fix messages after changing compression level by remount
btrfs: only search for left_info if there is no right_info in try_merge_free_space
btrfs: fix memory leaks after failure to lookup checksums during inode logging
btrfs: fix return value mixup in btrfs_get_extent
dt-bindings: iio: io-channel-mux: Fix compatible string in example code
iio: dac: ad5592r: fix unbalanced mutex unlocks in ad5592r_read_raw()
xtensa: fix xtensa_pmu_setup prototype
cifs: Fix leak when handling lease break for cached root fid
powerpc: Allow 4224 bytes of stack expansion for the signal frame
powerpc: Fix circular dependency between percpu.h and mmu.h
media: vsp1: dl: Fix NULL pointer dereference on unbind
net: ethernet: stmmac: Disable hardware multicast filter
net: stmmac: dwmac1000: provide multicast filter fallback
net/compat: Add missing sock updates for SCM_RIGHTS
md/raid5: Fix Force reconstruct-write io stuck in degraded raid5
bcache: allocate meta data pages as compound pages
bcache: fix overflow in offset_to_stripe()
mac80211: fix misplaced while instead of if
driver core: Avoid binding drivers to dead devices
MIPS: CPU#0 is not hotpluggable
ext2: fix missing percpu_counter_inc
ocfs2: change slot number type s16 to u16
mm/page_counter.c: fix protection usage propagation
ftrace: Setup correct FTRACE_FL_REGS flags for module
kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler
tracing/hwlat: Honor the tracing_cpumask
tracing: Use trace_sched_process_free() instead of exit() for pid tracing
watchdog: f71808e_wdt: indicate WDIOF_CARDRESET support in watchdog_info.options
watchdog: f71808e_wdt: remove use of wrong watchdog_info option
watchdog: f71808e_wdt: clear watchdog timeout occurred flag
pseries: Fix 64 bit logical memory block panic
module: Correctly truncate sysfs sections output
perf intel-pt: Fix FUP packet state
remoteproc: qcom: q6v5: Update running state before requesting stop
drm/imx: imx-ldb: Disable both channels for split mode in enc->disable()
mfd: arizona: Ensure 32k clock is put on driver unbind and error
RDMA/ipoib: Return void from ipoib_ib_dev_stop()
RDMA/ipoib: Fix ABBA deadlock with ipoib_reap_ah()
media: rockchip: rga: Introduce color fmt macros and refactor CSC mode logic
media: rockchip: rga: Only set output CSC mode for RGB input
USB: serial: ftdi_sio: make process-packet buffer unsigned
USB: serial: ftdi_sio: clean up receive processing
mmc: renesas_sdhi_internal_dmac: clean up the code for dma complete
gpu: ipu-v3: image-convert: Combine rotate/no-rotate irq handlers
dm rq: don't call blk_mq_queue_stopped() in dm_stop_queue()
selftests/powerpc: ptrace-pkey: Rename variables to make it easier to follow code
selftests/powerpc: ptrace-pkey: Update the test to mark an invalid pkey correctly
selftests/powerpc: ptrace-pkey: Don't update expected UAMOR value
iommu/omap: Check for failure of a call to omap_iommu_dump_ctx
iommu/vt-d: Enforce PASID devTLB field mask
i2c: rcar: slave: only send STOP event when we have been addressed
clk: clk-atlas6: fix return value check in atlas6_clk_init()
pwm: bcm-iproc: handle clk_get_rate() return
tools build feature: Use CC and CXX from parent
i2c: rcar: avoid race when unregistering slave
openrisc: Fix oops caused when dumping stack
scsi: lpfc: nvmet: Avoid hang / use-after-free again when destroying targetport
watchdog: initialize device before misc_register
Input: sentelic - fix error return when fsp_reg_write fails
drm/vmwgfx: Use correct vmw_legacy_display_unit pointer
drm/vmwgfx: Fix two list_for_each loop exit tests
net: qcom/emac: add missed clk_disable_unprepare in error path of emac_clks_phase1_init
nfs: Fix getxattr kernel panic and memory overflow
fs/minix: set s_maxbytes correctly
fs/minix: fix block limit check for V1 filesystems
fs/minix: remove expected error message in block_to_path()
fs/ufs: avoid potential u32 multiplication overflow
test_kmod: avoid potential double free in trigger_config_run_type()
mfd: dln2: Run event handler loop under spinlock
ALSA: echoaudio: Fix potential Oops in snd_echo_resume()
perf bench mem: Always memset source before memcpy
tools build feature: Quote CC and CXX for their arguments
sh: landisk: Add missing initialization of sh_io_port_base
khugepaged: retract_page_tables() remember to test exit
arm64: dts: marvell: espressobin: add ethernet alias
drm: Added orientation quirk for ASUS tablet model T103HAF
drm/amdgpu: Fix bug where DPM is not enabled after hibernate and resume
Linux 4.19.141
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I0800f8e03919fd8f054c1bcda87efd70a6e5db6b
[ Upstream commit ce054039ba5e47b75a3be02a00274e52b06a6456 ]
Clean up receive processing by dropping the character pointer and
keeping the length argument unchanged throughout the function.
Also make it more apparent that sysrq processing can consume a
characters by adding an explicit continue.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab4cc4ef6724ea588e835fc1e764c4b4407a70b7 ]
Use an unsigned type for the process-packet buffer argument and give it
a more apt name.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9oFP
-----END PGP SIGNATURE-----
Merge 4.19.140 into android-4.19-stable
Changes in 4.19.140
tracepoint: Mark __tracepoint_string's __used
HID: input: Fix devices that return multiple bytes in battery report
cgroup: add missing skcd->no_refcnt check in cgroup_sk_clone()
x86/mce/inject: Fix a wrong assignment of i_mce.status
sched/fair: Fix NOHZ next idle balance
sched: correct SD_flags returned by tl->sd_flags()
arm64: dts: rockchip: fix rk3368-lion gmac reset gpio
arm64: dts: rockchip: fix rk3399-puma vcc5v0-host gpio
arm64: dts: rockchip: fix rk3399-puma gmac reset gpio
EDAC: Fix reference count leaks
arm64: dts: qcom: msm8916: Replace invalid bias-pull-none property
crypto: ccree - fix resource leak on error path
firmware: arm_scmi: Fix SCMI genpd domain probing
arm64: dts: exynos: Fix silent hang after boot on Espresso
clk: scmi: Fix min and max rate when registering clocks with discrete rates
m68k: mac: Don't send IOP message until channel is idle
m68k: mac: Fix IOP status/control register writes
platform/x86: intel-hid: Fix return value check in check_acpi_dev()
platform/x86: intel-vbtn: Fix return value check in check_acpi_dev()
ARM: dts: gose: Fix ports node name for adv7180
ARM: dts: gose: Fix ports node name for adv7612
ARM: at91: pm: add missing put_device() call in at91_pm_sram_init()
spi: lantiq: fix: Rx overflow error in full duplex mode
ARM: socfpga: PM: add missing put_device() call in socfpga_setup_ocram_self_refresh()
drm/tilcdc: fix leak & null ref in panel_connector_get_modes
soc: qcom: rpmh-rsc: Set suppress_bind_attrs flag
Bluetooth: add a mutex lock to avoid UAF in do_enale_set
loop: be paranoid on exit and prevent new additions / removals
fs/btrfs: Add cond_resched() for try_release_extent_mapping() stalls
drm/amdgpu: avoid dereferencing a NULL pointer
drm/radeon: Fix reference count leaks caused by pm_runtime_get_sync
crypto: aesni - Fix build with LLVM_IAS=1
video: fbdev: neofb: fix memory leak in neo_scan_monitor()
md-cluster: fix wild pointer of unlock_all_bitmaps()
arm64: dts: hisilicon: hikey: fixes to comply with adi, adv7533 DT binding
drm/etnaviv: fix ref count leak via pm_runtime_get_sync
drm/nouveau: fix multiple instances of reference count leaks
usb: mtu3: clear dual mode of u3port when disable device
drm/debugfs: fix plain echo to connector "force" attribute
drm/radeon: disable AGP by default
irqchip/irq-mtk-sysirq: Replace spinlock with raw_spinlock
mm/mmap.c: Add cond_resched() for exit_mmap() CPU stalls
brcmfmac: keep SDIO watchdog running when console_interval is non-zero
brcmfmac: To fix Bss Info flag definition Bug
brcmfmac: set state of hanger slot to FREE when flushing PSQ
iwlegacy: Check the return value of pcie_capability_read_*()
gpu: host1x: debug: Fix multiple channels emitting messages simultaneously
usb: gadget: net2280: fix memory leak on probe error handling paths
bdc: Fix bug causing crash after multiple disconnects
usb: bdc: Halt controller on suspend
dyndbg: fix a BUG_ON in ddebug_describe_flags
bcache: fix super block seq numbers comparision in register_cache_set()
ACPICA: Do not increment operation_region reference counts for field units
drm/msm: ratelimit crtc event overflow error
agp/intel: Fix a memory leak on module initialisation failure
video: fbdev: sm712fb: fix an issue about iounmap for a wrong address
console: newport_con: fix an issue about leak related system resources
video: pxafb: Fix the function used to balance a 'dma_alloc_coherent()' call
ath10k: Acquire tx_lock in tx error paths
iio: improve IIO_CONCENTRATION channel type description
drm/etnaviv: Fix error path on failure to enable bus clk
drm/arm: fix unintentional integer overflow on left shift
leds: lm355x: avoid enum conversion warning
media: omap3isp: Add missed v4l2_ctrl_handler_free() for preview_init_entities()
ASoC: Intel: bxt_rt298: add missing .owner field
scsi: cumana_2: Fix different dev_id between request_irq() and free_irq()
drm/mipi: use dcs write for mipi_dsi_dcs_set_tear_scanline
cxl: Fix kobject memleak
drm/radeon: fix array out-of-bounds read and write issues
scsi: powertec: Fix different dev_id between request_irq() and free_irq()
scsi: eesox: Fix different dev_id between request_irq() and free_irq()
ipvs: allow connection reuse for unconfirmed conntrack
media: firewire: Using uninitialized values in node_probe()
media: exynos4-is: Add missed check for pinctrl_lookup_state()
xfs: don't eat an EIO/ENOSPC writeback error when scrubbing data fork
xfs: fix reflink quota reservation accounting error
RDMA/rxe: Skip dgid check in loopback mode
PCI: Fix pci_cfg_wait queue locking problem
leds: core: Flush scheduled work for system suspend
drm: panel: simple: Fix bpc for LG LB070WV8 panel
phy: exynos5-usbdrd: Calibrating makes sense only for USB2.0 PHY
drm/bridge: sil_sii8620: initialize return of sii8620_readb
scsi: scsi_debug: Add check for sdebug_max_queue during module init
mwifiex: Prevent memory corruption handling keys
powerpc/vdso: Fix vdso cpu truncation
RDMA/qedr: SRQ's bug fixes
RDMA/rxe: Prevent access to wr->next ptr afrer wr is posted to send queue
staging: rtl8192u: fix a dubious looking mask before a shift
PCI/ASPM: Add missing newline in sysfs 'policy'
powerpc/book3s64/pkeys: Use PVR check instead of cpu feature
drm/imx: tve: fix regulator_disable error path
USB: serial: iuu_phoenix: fix led-activity helpers
usb: core: fix quirks_param_set() writing to a const pointer
thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor()
coresight: tmc: Fix TMC mode read in tmc_read_unprepare_etb()
MIPS: OCTEON: add missing put_device() call in dwc3_octeon_device_init()
usb: dwc2: Fix error path in gadget registration
scsi: mesh: Fix panic after host or bus reset
net: dsa: mv88e6xxx: MV88E6097 does not support jumbo configuration
PCI: cadence: Fix updating Vendor ID and Subsystem Vendor ID register
RDMA/core: Fix return error value in _ib_modify_qp() to negative
Smack: fix another vsscanf out of bounds
Smack: prevent underflow in smk_set_cipso()
power: supply: check if calc_soc succeeded in pm860x_init_battery
Bluetooth: hci_h5: Set HCI_UART_RESET_ON_INIT to correct flags
Bluetooth: hci_serdev: Only unregister device if it was registered
net: dsa: rtl8366: Fix VLAN semantics
net: dsa: rtl8366: Fix VLAN set-up
powerpc/boot: Fix CONFIG_PPC_MPC52XX references
selftests/powerpc: Fix CPU affinity for child process
PCI: Release IVRS table in AMD ACS quirk
selftests/powerpc: Fix online CPU selection
ASoC: meson: axg-tdm-interface: fix link fmt setup
s390/qeth: don't process empty bridge port events
wl1251: fix always return 0 error
tools, build: Propagate build failures from tools/build/Makefile.build
net: ethernet: aquantia: Fix wrong return value
liquidio: Fix wrong return value in cn23xx_get_pf_num()
net: spider_net: Fix the size used in a 'dma_free_coherent()' call
fsl/fman: use 32-bit unsigned integer
fsl/fman: fix dereference null return value
fsl/fman: fix unreachable code
fsl/fman: check dereferencing null pointer
fsl/fman: fix eth hash table allocation
dlm: Fix kobject memleak
ocfs2: fix unbalanced locking
pinctrl-single: fix pcs_parse_pinconf() return value
svcrdma: Fix page leak in svc_rdma_recv_read_chunk()
x86/fsgsbase/64: Fix NULL deref in 86_fsgsbase_read_task
crypto: aesni - add compatibility with IAS
af_packet: TPACKET_V3: fix fill status rwlock imbalance
drivers/net/wan/lapbether: Added needed_headroom and a skb->len check
net/nfc/rawsock.c: add CAP_NET_RAW check.
net: Set fput_needed iff FDPUT_FPUT is set
net/tls: Fix kmap usage
net: refactor bind_bucket fastreuse into helper
net: initialize fastreuse on inet_inherit_port
USB: serial: cp210x: re-enable auto-RTS on open
USB: serial: cp210x: enable usb generic throttle/unthrottle
ALSA: hda - fix the micmute led status for Lenovo ThinkCentre AIO
ALSA: usb-audio: Creative USB X-Fi Pro SB1095 volume knob support
ALSA: usb-audio: fix overeager device match for MacroSilicon MS2109
ALSA: usb-audio: work around streaming quirk for MacroSilicon MS2109
pstore: Fix linking when crypto API disabled
crypto: hisilicon - don't sleep of CRYPTO_TFM_REQ_MAY_SLEEP was not specified
crypto: qat - fix double free in qat_uclo_create_batch_init_list
crypto: ccp - Fix use of merged scatterlists
crypto: cpt - don't sleep of CRYPTO_TFM_REQ_MAY_SLEEP was not specified
bitfield.h: don't compile-time validate _val in FIELD_FIT
fs/minix: check return value of sb_getblk()
fs/minix: don't allow getting deleted inodes
fs/minix: reject too-large maximum file size
ALSA: usb-audio: add quirk for Pioneer DDJ-RB
9p: Fix memory leak in v9fs_mount
drm/ttm/nouveau: don't call tt destroy callback on alloc failure.
NFS: Don't move layouts to plh_return_segs list while in use
NFS: Don't return layout segments that are in use
cpufreq: dt: fix oops on armada37xx
include/asm-generic/vmlinux.lds.h: align ro_after_init
spi: spidev: Align buffers for DMA
mtd: rawnand: qcom: avoid write to unavailable register
parisc: Implement __smp_store_release and __smp_load_acquire barriers
parisc: mask out enable and reserved bits from sba imask
ARM: 8992/1: Fix unwind_frame for clang-built kernels
irqdomain/treewide: Free firmware node after domain removal
xen/balloon: fix accounting in alloc_xenballooned_pages error path
xen/balloon: make the balloon wait interruptible
xen/gntdev: Fix dmabuf import with non-zero sgt offset
Linux 4.19.140
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I6b0d8dcf9ded022f62d9c62605388f1c1e9112d1
commit 4387b3dbb079d482d3c2b43a703ceed4dd27ed28 upstream.
Assign the .throttle and .unthrottle functions to be generic function
in the driver structure to prevent data loss that can otherwise occur
if the host does not enable USB throttling.
Signed-off-by: Brant Merryman <brant.merryman@silabs.com>
Co-developed-by: Phu Luu <phu.luu@silabs.com>
Signed-off-by: Phu Luu <phu.luu@silabs.com>
Link: https://lore.kernel.org/r/57401AF3-9961-461F-95E1-F8AFC2105F5E@silabs.com
[ johan: fix up tags ]
Fixes: 39a66b8d22 ("[PATCH] USB: CP2101 Add support for flow control")
Cc: stable <stable@vger.kernel.org> # 2.6.12
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c7614ff9b73a1e6fb2b1b51396da132ed22fecdb upstream.
CP210x hardware disables auto-RTS but leaves auto-CTS when in hardware
flow control mode and UART on cp210x hardware is disabled. When
re-opening the port, if auto-CTS is enabled on the cp210x, then auto-RTS
must be re-enabled in the driver.
Signed-off-by: Brant Merryman <brant.merryman@silabs.com>
Co-developed-by: Phu Luu <phu.luu@silabs.com>
Signed-off-by: Phu Luu <phu.luu@silabs.com>
Link: https://lore.kernel.org/r/ECCF8E73-91F3-4080-BE17-1714BC8818FB@silabs.com
[ johan: fix up tags and problem description ]
Fixes: 39a66b8d22 ("[PATCH] USB: CP2101 Add support for flow control")
Cc: stable <stable@vger.kernel.org> # 2.6.12
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 33a06f1300a79cfd461cea0268f05e969d4f34ec ]
When gadget registration fails, one should not call usb_del_gadget_udc().
Ensure this by setting gadget->udc to NULL. Also in case of a failure
there is no need to disable low-level hardware, so return immiedetly
instead of jumping to error_init label.
This fixes the following kernel NULL ptr dereference on gadget failure
(can be easily triggered with g_mass_storage without any module
parameters):
dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter besl=1
dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter g_np_tx_fifo_size=1024
dwc2 12480000.hsotg: EPs: 16, dedicated fifos, 7808 entries in SPRAM
Mass Storage Function, version: 2009/09/11
LUN: removable file: (no medium)
no file given for LUN0
g_mass_storage 12480000.hsotg: failed to start g_mass_storage: -22
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 00000104
pgd = (ptrval)
[00000104] *pgd=00000000
Internal error: Oops: 805 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.8.0-rc5 #3133
Hardware name: Samsung Exynos (Flattened Device Tree)
Workqueue: events deferred_probe_work_func
PC is at usb_del_gadget_udc+0x38/0xc4
LR is at __mutex_lock+0x31c/0xb18
...
Process kworker/0:1 (pid: 12, stack limit = 0x(ptrval))
Stack: (0xef121db0 to 0xef122000)
...
[<c076bf3c>] (usb_del_gadget_udc) from [<c0726bec>] (dwc2_hsotg_remove+0x10/0x20)
[<c0726bec>] (dwc2_hsotg_remove) from [<c0711208>] (dwc2_driver_probe+0x57c/0x69c)
[<c0711208>] (dwc2_driver_probe) from [<c06247c0>] (platform_drv_probe+0x6c/0xa4)
[<c06247c0>] (platform_drv_probe) from [<c0621df4>] (really_probe+0x200/0x48c)
[<c0621df4>] (really_probe) from [<c06221e8>] (driver_probe_device+0x78/0x1fc)
[<c06221e8>] (driver_probe_device) from [<c061fcd4>] (bus_for_each_drv+0x74/0xb8)
[<c061fcd4>] (bus_for_each_drv) from [<c0621b54>] (__device_attach+0xd4/0x16c)
[<c0621b54>] (__device_attach) from [<c0620c98>] (bus_probe_device+0x88/0x90)
[<c0620c98>] (bus_probe_device) from [<c06211b0>] (deferred_probe_work_func+0x3c/0xd0)
[<c06211b0>] (deferred_probe_work_func) from [<c0149280>] (process_one_work+0x234/0x7dc)
[<c0149280>] (process_one_work) from [<c014986c>] (worker_thread+0x44/0x51c)
[<c014986c>] (worker_thread) from [<c0150b1c>] (kthread+0x158/0x1a0)
[<c0150b1c>] (kthread) from [<c0100114>] (ret_from_fork+0x14/0x20)
Exception stack(0xef121fb0 to 0xef121ff8)
...
---[ end trace 9724c2fc7cc9c982 ]---
While fixing this also fix the double call to dwc2_lowlevel_hw_disable()
if dr_mode is set to USB_DR_MODE_PERIPHERAL. In such case low-level
hardware is already disabled before calling usb_add_gadget_udc(). That
function correctly preserves low-level hardware state, there is no need
for the second unconditional dwc2_lowlevel_hw_disable() call.
Fixes: 207324a321a8 ("usb: dwc2: Postponed gadget registration to the udc class driver")
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1b6bed3b5036509b449b5965285d5057ba42527 ]
The function quirks_param_set() takes as argument a const char* pointer
to the new value of the usbcore.quirks parameter. It then casts this
pointer to a non-const char* pointer and passes it to the strsep()
function, which overwrites the value.
Fix this by creating a copy of the value using kstrdup() and letting
that copy be written to by strsep().
Fixes: 027bd6cafd ("usb: core: Add "quirks" parameter for usbcore")
Signed-off-by: Kars Mulder <kerneldev@karsmulder.nl>
Link: https://lore.kernel.org/r/5ee2-5f048a00-21-618c5c00@230659773
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de37458f8c2bfc465500a1dd0d15dbe96d2a698c ]
The set-led command is eight bytes long and starts with a command byte
followed by six bytes of RGB data and ends with a byte encoding a
frequency (see iuu_led() and iuu_rgbf_fill_buffer()).
The led activity helpers had a few long-standing bugs which corrupted
the command packets by inserting a second command byte and thereby
offsetting the RGB data and dropping the frequency in non-xmas mode.
In xmas mode, a related off-by-one error left the frequency field
uninitialised.
Fixes: 60a8fc0171 ("USB: add iuu_phoenix driver")
Reported-by: George Spelvin <lkml@sdf.org>
Link: https://lore.kernel.org/r/20200716085056.31471-1-johan@kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fc453d7de3d0c345812453823a3a56783c5f82c ]
GISB bus error kernel panics have been observed during S2 transition
tests on the 7271t platform. The errors are a result of the BDC
interrupt handler trying to access BDC register space after the
system's suspend callbacks have completed.
Adding a suspend hook to the BDC driver that halts the controller before
S2 entry thus preventing unwanted access to the BDC register space during
this transition.
Signed-off-by: Danesh Petigara <danesh.petigara@broadcom.com>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a95bdfd22076497288868c028619bc5995f5cc7f ]
Multiple connects/disconnects can cause a crash on the second
disconnect. The driver had a problem where it would try to send
endpoint commands after it was disconnected which is not allowed
by the hardware. The fix is to only allow the endpoint commands
when the endpoint is connected. This will also fix issues that
showed up when using configfs to create gadgets.
Signed-off-by: Sasi Kumar <sasi.kumar@broadcom.com>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2468c877da428ebfd701142c4cdfefcfb7d4c00e ]
Driver does not release memory for device on error handling paths in
net2280_probe() when gadget_release() is not registered yet.
The patch fixes the bug like in other similar drivers.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1e51e99ed498d4aa9ae5df28e43d558ea627781 ]
If not clear u3port's dual mode when disable device, the IP
will fail to enter sleep mode when suspend.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1595834101-13094-10-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
When composition switch fails and composition is fallen to previous
composition, there is a chance that function config is null in
android setup which leads to null pointer dereference in function
driver. To avoid that add null check for function config in android
setup.
Change-Id: I922d279fcab6d2b1e945f1ba718cd40aafa3c2cb
Signed-off-by: Rohith Kollalsi <rkollals@codeaurora.org>
When we override speed to super from high some times we see enumeration
failure. This is because few descriptors are stuck in hs and invalid
descriptors error is observed. To fix that don't override speed to super
but set composition to none then usb cable plug out and plug in then
restore previous composition. This change sets override speed as 0 in
resume work so that after usb cable plug out and plug in, speed will be
changed to maximum hardware supported speed instead of changing to
override speed.
Change-Id: I4d5cfcc6a781fd369a70d26ccd9813a88111d028
Signed-off-by: Rohith Kollalsi <rkollals@codeaurora.org>
The usb_assign_descriptors copies the descriptors depending
on the maximum speed supported by the gadget.
If the function drivers unconditionally assign the
descriptors and the speed is limited to full, the switching
to the same function would lead to a use after free.
Fix this by removing unconditional assigning of descriptors
in the function drivers.
Change-Id: Id283c87d6f3ccf708507afb66a3b93121022e990
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
-----BEGIN PGP SIGNATURE-----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=ZQmS
-----END PGP SIGNATURE-----
Merge 4.19.139 into android-4.19-stable
Changes in 4.19.139
USB: serial: qcserial: add EM7305 QDL product ID
USB: iowarrior: fix up report size handling for some devices
usb: xhci: define IDs for various ASMedia host controllers
usb: xhci: Fix ASMedia ASM1142 DMA addressing
Revert "ALSA: hda: call runtime_allow() for all hda controllers"
ALSA: seq: oss: Serialize ioctls
staging: android: ashmem: Fix lockdep warning for write operation
Bluetooth: Fix slab-out-of-bounds read in hci_extended_inquiry_result_evt()
Bluetooth: Prevent out-of-bounds read in hci_inquiry_result_evt()
Bluetooth: Prevent out-of-bounds read in hci_inquiry_result_with_rssi_evt()
omapfb: dss: Fix max fclk divider for omap36xx
binder: Prevent context manager from incrementing ref 0
vgacon: Fix for missing check in scrollback handling
mtd: properly check all write ioctls for permissions
leds: wm831x-status: fix use-after-free on unbind
leds: da903x: fix use-after-free on unbind
leds: lm3533: fix use-after-free on unbind
leds: 88pm860x: fix use-after-free on unbind
net/9p: validate fds in p9_fd_open
drm/nouveau/fbcon: fix module unload when fbcon init has failed for some reason
drm/nouveau/fbcon: zero-initialise the mode_cmd2 structure
i2c: slave: improve sanity check when registering
i2c: slave: add sanity check when unregistering
usb: hso: check for return value in hso_serial_common_create()
firmware: Fix a reference count leak.
cfg80211: check vendor command doit pointer before use
igb: reinit_locked() should be called with rtnl_lock
atm: fix atm_dev refcnt leaks in atmtcp_remove_persistent
tools lib traceevent: Fix memory leak in process_dynamic_array_len
Drivers: hv: vmbus: Ignore CHANNELMSG_TL_CONNECT_RESULT(23)
xattr: break delegations in {set,remove}xattr
ipv4: Silence suspicious RCU usage warning
ipv6: fix memory leaks on IPV6_ADDRFORM path
net: ethernet: mtk_eth_soc: fix MTU warnings
vxlan: Ensure FDB dump is performed under RCU
net: lan78xx: replace bogus endpoint lookup
hv_netvsc: do not use VF device if link is down
net: gre: recompute gre csum for sctp over gre tunnels
net: thunderx: use spin_lock_bh in nicvf_set_rx_mode_task()
openvswitch: Prevent kernel-infoleak in ovs_ct_put_key()
Revert "vxlan: fix tos value before xmit"
selftests/net: relax cpu affinity requirement in msg_zerocopy test
rxrpc: Fix race between recvmsg and sendmsg on immediate call failure
i40e: add num_vectors checker in iwarp handler
i40e: Wrong truncation from u16 to u8
i40e: Fix of memory leak and integer truncation in i40e_virtchnl.c
i40e: Memory leak in i40e_config_iwarp_qvlist
Smack: fix use-after-free in smk_write_relabel_self()
Linux 4.19.139
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: If64996b6bc365365c5f06165ed8c7648336731bf
commit ec37198acca7b4c17b96247697406e47aafe0605 upstream.
I've confirmed that the ASMedia ASM1142 has the same problem as the
ASM2142/ASM3142, in that it too reports that it supports 64-bit DMA
addresses when in fact it does not. As with the ASM2142/ASM3142, this
can cause problems on systems where the upper bits matter, and adding
the XHCI_NO_64BIT_SUPPORT quirk completely fixes the issue.
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200728042408.180529-3-cyrozap@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1841cb255da41e87bed9573915891d056f80e2e7 upstream.
Not all ASMedia host controllers have a device ID that matches its part
number. #define some of these IDs to make it clearer at a glance which
chips require what quirks.
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Link: https://lore.kernel.org/r/20200728042408.180529-2-cyrozap@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 17a82716587e9d7c3b246a789add490b2b5dcab6 upstream.
In previous patches that added support for new iowarrior devices, the
handling of the report size was not done correct.
Fix that up and update the copyright date for the driver
Reworked from an original patch written by Christoph Jung.
Fixes: bab5417f5f01 ("USB: misc: iowarrior: add support for the 100 device")
Fixes: 5f6f8da2d7b5 ("USB: misc: iowarrior: add support for the 28 and 28L devices")
Fixes: 461d8deb26a7 ("USB: misc: iowarrior: add support for 2 OEMed devices")
Cc: stable <stable@kernel.org>
Reported-by: Christoph Jung <jung@codemercs.com>
Link: https://lore.kernel.org/r/20200726094939.1268978-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d2a4309c1ab6df424b2239fe2920d6f26f808d17 upstream.
When running qmi-firmware-update on the Sierra Wireless EM7305 in a Toshiba
laptop, it changed product ID to 0x9062 when entering QDL mode:
usb 2-4: new high-speed USB device number 78 using xhci_hcd
usb 2-4: New USB device found, idVendor=1199, idProduct=9062, bcdDevice= 0.00
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4: Product: EM7305
usb 2-4: Manufacturer: Sierra Wireless, Incorporated
The upgrade could complete after running
# echo 1199 9062 > /sys/bus/usb-serial/drivers/qcserial/new_id
qcserial 2-4:1.0: Qualcomm USB modem converter detected
usb 2-4: Qualcomm USB modem converter now attached to ttyUSB0
Signed-off-by: Erik Ekman <erik@kryo.se>
Link: https://lore.kernel.org/r/20200717185118.3640219-1-erik@kryo.se
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8aafbcb usb: dwc3: gadget: Properly handle failed kick_transfer
c646369 soc: qcom: rpmh: Dirt can only make you dirtier, not cleaner
a91f874 soc: qcom: rpmh-rsc: Allow using free WAKE TCS for active request
c15a40c soc: qcom: rpmh-rsc: Clear active mode configuration for wake TCS
8644121 soc: qcom: rpmh: Invalidate SLEEP and WAKE TCSes before flushing new data
d504699 soc: qcom: rpmh: Update dirty flag only when data changes
Change-Id: I0d919e1b658c8195230444ef118f7f1fe8e63b47
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
Commit f696712122 ("usb: dwc3: Delete the request from pending
list in case of ep queue failure") deletes request from pending
or started list if ep queue failure is observed. However, this
approach is correct only if request is still in pending list and
endxfer is issued, but if request is moved to started list and any
failure occurs we delete the request in kick transfer, in this case
we are deleting the same request again in ep queue.
Inorder to avoid deleting the same request twice, don't add the
request to pending list if DWC3_EP_END_TRANSFER_PENDING flag is set
at the start of ep queue and return -ESHUTDOWN.
Change-Id: I56be446219ac3dcdd28a62a744189838af634822
Signed-off-by: Rohith Kollalsi <rkollals@codeaurora.org>
Commit 3fb319966d33 ("usb: gadget: increase write buffer size") brings
additional memory requirement and leads to memory allocation failure
when trying to allocate buffer to the request in usb_cser_alloc_req.
Hence revert it to fix this.
Change-Id: Iff5d6a2502d7ff094422fc66c20dff13d5b8d4ca
Signed-off-by: Rohith Kollalsi <rkollals@codeaurora.org>
-----BEGIN PGP SIGNATURE-----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=ugxS
-----END PGP SIGNATURE-----
Merge 4.19.135 into android-4.19-stable
Changes in 4.19.135
soc: qcom: rpmh: Dirt can only make you dirtier, not cleaner
gpio: arizona: handle pm_runtime_get_sync failure case
gpio: arizona: put pm_runtime in case of failure
pinctrl: amd: fix npins for uart0 in kerncz_groups
mac80211: allow rx of mesh eapol frames with default rx key
scsi: scsi_transport_spi: Fix function pointer check
xtensa: fix __sync_fetch_and_{and,or}_4 declarations
xtensa: update *pos in cpuinfo_op.next
drivers/net/wan/lapbether: Fixed the value of hard_header_len
net: sky2: initialize return of gm_phy_read
drm/nouveau/i2c/g94-: increase NV_PMGR_DP_AUXCTL_TRANSACTREQ timeout
drivers/firmware/psci: Fix memory leakage in alloc_init_cpu_groups()
fuse: fix weird page warning
irqdomain/treewide: Keep firmware node unconditionally allocated
SUNRPC reverting d03727b248d0 ("NFSv4 fix CLOSE not waiting for direct IO compeletion")
spi: spi-fsl-dspi: Exit the ISR with IRQ_NONE when it's not ours
tipc: clean up skb list lock handling on send path
IB/umem: fix reference count leak in ib_umem_odp_get()
uprobes: Change handle_swbp() to send SIGTRAP with si_code=SI_KERNEL, to fix GDB regression
ALSA: info: Drop WARN_ON() from buffer NULL sanity check
ASoC: rt5670: Correct RT5670_LDO_SEL_MASK
btrfs: fix double free on ulist after backref resolution failure
btrfs: fix mount failure caused by race with umount
btrfs: fix page leaks after failure to lock page for delalloc
bnxt_en: Fix race when modifying pause settings.
fpga: dfl: fix bug in port reset handshake
hippi: Fix a size used in a 'pci_free_consistent()' in an error handling path
ax88172a: fix ax88172a_unbind() failures
net: dp83640: fix SIOCSHWTSTAMP to update the struct with actual configuration
ieee802154: fix one possible memleak in adf7242_probe
drm: sun4i: hdmi: Fix inverted HPD result
net: smc91x: Fix possible memory leak in smc_drv_probe()
bonding: check error value of register_netdevice() immediately
mlxsw: destroy workqueue when trap_register in mlxsw_emad_init
qed: suppress "don't support RoCE & iWARP" flooding on HW init
ipvs: fix the connection sync failed in some cases
net: ethernet: ave: Fix error returns in ave_init
i2c: rcar: always clear ICSAR to avoid side effects
bonding: check return value of register_netdevice() in bond_newlink()
serial: exar: Fix GPIO configuration for Sealevel cards based on XR17V35X
scripts/decode_stacktrace: strip basepath from all paths
scripts/gdb: fix lx-symbols 'gdb.error' while loading modules
HID: i2c-hid: add Mediacom FlexBook edge13 to descriptor override
HID: alps: support devices with report id 2
HID: steam: fixes race in handling device list.
HID: apple: Disable Fn-key key-re-mapping on clone keyboards
dmaengine: tegra210-adma: Fix runtime PM imbalance on error
Input: add `SW_MACHINE_COVER`
spi: mediatek: use correct SPI_CFG2_REG MACRO
regmap: dev_get_regmap_match(): fix string comparison
hwmon: (aspeed-pwm-tacho) Avoid possible buffer overflow
dmaengine: ioat setting ioat timeout as module parameter
Input: synaptics - enable InterTouch for ThinkPad X1E 1st gen
usb: gadget: udc: gr_udc: fix memleak on error handling path in gr_ep_init()
hwmon: (adm1275) Make sure we are reading enough data for different chips
hwmon: (scmi) Fix potential buffer overflow in scmi_hwmon_probe()
arm64: Use test_tsk_thread_flag() for checking TIF_SINGLESTEP
x86: math-emu: Fix up 'cmp' insn for clang ias
RISC-V: Upgrade smp_mb__after_spinlock() to iorw,iorw
binder: Don't use mmput() from shrinker function.
usb: xhci-mtk: fix the failure of bandwidth allocation
usb: xhci: Fix ASM2142/ASM3142 DMA addressing
Revert "cifs: Fix the target file was deleted when rename failed."
staging: wlan-ng: properly check endpoint types
staging: comedi: addi_apci_1032: check INSN_CONFIG_DIGITAL_TRIG shift
staging: comedi: ni_6527: fix INSN_CONFIG_DIGITAL_TRIG support
staging: comedi: addi_apci_1500: check INSN_CONFIG_DIGITAL_TRIG shift
staging: comedi: addi_apci_1564: check INSN_CONFIG_DIGITAL_TRIG shift
serial: 8250: fix null-ptr-deref in serial8250_start_tx()
serial: 8250_mtk: Fix high-speed baud rates clamping
fbdev: Detect integer underflow at "struct fbcon_ops"->clear_margins.
vt: Reject zero-sized screen buffer size.
Makefile: Fix GCC_TOOLCHAIN_DIR prefix for Clang cross compilation
mm/memcg: fix refcount error while moving and swapping
mm: memcg/slab: synchronize access to kmem_cache dying flag using a spinlock
mm: memcg/slab: fix memory leak at non-root kmem_cache destroy
io-mapping: indicate mapping failure
drm/amdgpu: Fix NULL dereference in dpm sysfs handlers
drm/amd/powerplay: fix a crash when overclocking Vega M
parisc: Add atomic64_set_release() define to avoid CPU soft lockups
x86, vmlinux.lds: Page-align end of ..page_aligned sections
ASoC: rt5670: Add new gpio1_is_ext_spk_en quirk and enable it on the Lenovo Miix 2 10
ASoC: qcom: Drop HAS_DMA dependency to fix link failure
dm integrity: fix integrity recalculation that is improperly skipped
ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb
ath9k: Fix regression with Atheros 9271
Linux 4.19.135
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I0bbcde83e7c810352d998f28d3484efa2b9ede8e
commit dbb0897e805f2ab1b8bc358f6c3d878a376b8897 upstream.
The ASM2142/ASM3142 (same PCI IDs) does not support full 64-bit DMA
addresses, which can cause silent memory corruption or IOMMU errors on
platforms that use the upper bits. Add the XHCI_NO_64BIT_SUPPORT quirk
to fix this issue.
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200717112734.328432-1-cyrozap@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ce1a24dd98c00a57a8fa13660648abf7e08e3ef upstream.
The wMaxPacketSize field of endpoint descriptor may be zero
as default value in alternate interface, and they are not
actually selected when start stream, so skip them when try to
allocate bandwidth.
Cc: stable <stable@vger.kernel.org>
Fixes: 0cbd4b34cd ("xhci: mediatek: support MTK xHCI host controller")
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1594360672-2076-1-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c8f8529e2c4141afa2ebb487ad48e8a6ec3e8c99 ]
gr_ep_init() does not assign the allocated request anywhere if allocation
of memory for the buffer fails. This is a memory leak fixed by the given
patch.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a possibility of null pointer dereference for sk_buff in
the function eth_start_xmit. Fix this by removing sk_buff from if
check at the start of the function eth_start_xmit so that if sk_buff
is null dev_kfree_skb_any will return without proceeding further.
Change-Id: I105e42c59aaa83c8d74cc5a9e894ae4fc87c3c9f
Signed-off-by: Rohith Kollalsi <rkollals@codeaurora.org>
With USB QDSS software path disable case, usb_qdss_close() API tries to
dequeue all queued USB requests which may have been already moved to
cancelled list and unlikely available as those may have been already
given back from end xfer command. There are more than 200 USB request
and quick enable/disable of USB QDSS software path results into error
message flooding serial console possibly causign watchdog timeout.
Hence rate limit error message with ep_queue() API.
Change-Id: I78dbffc5ec5e1b5d8d0df91da6aded398c988be9
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Udipto Goswami <ugoswami@codeaurora.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEZH8oZUiU471FcZm+ONu9yGCSaT4FAl8X634ACgkQONu9yGCS
aT5sNBAA0JUGRrRlbQMgMtjR7ua+OLi3e07A0QNzD9xHqCc6NEXPuk4yYF8Pcs3g
1ARyEDXybdfUFciChoH0zfBxEbXuB/8+3M3ikE6XV3V/aySzHpfXU/zrepq4kB4G
JOqtAxHaLF1tHzsdSZiT3Qj8k8QCcyN9kB08g67JKAe7vd03SKg7CAbBb0JLEUGF
6s7AxohupSJLBWaaQsgYiYMzkH8WceyGMGYydNUNtHLTbHPaj1f5KaRBuHA0Ls57
35ba0suCL3pTbOZ+dF7CqO3mfQgLAY3/vE0jZpoNn3s7BMgOwr3d3cEUhRxI9GPl
fO4Ua7Q9NZ67blLwD/fhcua8CeQUXSxqH5YcgDNqQHnZLx7CJW6kEKbFMlqWNaxf
yhJbmgZJl+BqTkrIaAbz5FCXO6zAnRehh9L54SzZEdBpp5Y5Ep5nuSkwyZra1KWd
b0YK5Yy7dzkZLgPsUc4JrC0o1859IrbvC84fPOk4nuovtCfugnSoIXYjmGQHPFH1
Y5qt/DazsVdzpZIrg2Nvr/LrKh0BOPBjj3SYiCPfZkQDWkKF6ABWSggBxFEqn690
dbJL2A0j+mvuYxUJnkNt0NR3qzXZewHJSqFpCPkN2/TbMNmr9FvKeox9HUIo4qq4
7fqMPs4JNGZHPU7CqxIPJ3s9fjluhkkUtOXZmpzCV/58xI5ZzN0=
=3LQn
-----END PGP SIGNATURE-----
Merge 4.19.134 into android-4.19-stable
Changes in 4.19.134
perf: Make perf able to build with latest libbfd
net: rmnet: fix lower interface leak
genetlink: remove genl_bind
ipv4: fill fl4_icmp_{type,code} in ping_v4_sendmsg
l2tp: remove skb_dst_set() from l2tp_xmit_skb()
llc: make sure applications use ARPHRD_ETHER
net: Added pointer check for dst->ops->neigh_lookup in dst_neigh_lookup_skb
net_sched: fix a memory leak in atm_tc_init()
net: usb: qmi_wwan: add support for Quectel EG95 LTE modem
tcp: fix SO_RCVLOWAT possible hangs under high mem pressure
tcp: make sure listeners don't initialize congestion-control state
tcp: md5: add missing memory barriers in tcp_md5_do_add()/tcp_md5_hash_key()
tcp: md5: do not send silly options in SYNCOOKIES
tcp: md5: refine tcp_md5_do_add()/tcp_md5_hash_key() barriers
tcp: md5: allow changing MD5 keys in all socket states
cgroup: fix cgroup_sk_alloc() for sk_clone_lock()
cgroup: Fix sock_cgroup_data on big-endian.
sched: consistently handle layer3 header accesses in the presence of VLANs
vlan: consolidate VLAN parsing code and limit max parsing depth
drm/msm: fix potential memleak in error branch
drm/exynos: fix ref count leak in mic_pre_enable
m68k: nommu: register start of the memory with memblock
m68k: mm: fix node memblock init
arm64/alternatives: use subsections for replacement sequences
tpm_tis: extra chip->ops check on error path in tpm_tis_core_init
gfs2: read-only mounts should grab the sd_freeze_gl glock
i2c: eg20t: Load module automatically if ID matches
arm64/alternatives: don't patch up internal branches
iio:magnetometer:ak8974: Fix alignment and data leak issues
iio:humidity:hdc100x Fix alignment and data leak issues
iio: magnetometer: ak8974: Fix runtime PM imbalance on error
iio: mma8452: Add missed iio_device_unregister() call in mma8452_probe()
iio: pressure: zpa2326: handle pm_runtime_get_sync failure
iio:humidity:hts221 Fix alignment and data leak issues
iio:pressure:ms5611 Fix buffer element alignment
iio:health:afe4403 Fix timestamp alignment and prevent data leak.
spi: fix initial SPI_SR value in spi-fsl-dspi
spi: spi-fsl-dspi: Fix lockup if device is shutdown during SPI transfer
net: dsa: bcm_sf2: Fix node reference count
of: of_mdio: Correct loop scanning logic
Revert "usb/ohci-platform: Fix a warning when hibernating"
Revert "usb/xhci-plat: Set PM runtime as active on resume"
Revert "usb/ehci-platform: Set PM runtime as active on resume"
net: sfp: add support for module quirks
net: sfp: add some quirks for GPON modules
HID: quirks: Remove ITE 8595 entry from hid_have_special_driver
ARM: at91: pm: add quirk for sam9x60's ulp1
scsi: sr: remove references to BLK_DEV_SR_VENDOR, leave it enabled
ALSA: usb-audio: Create a registration quirk for Kingston HyperX Amp (0951:16d8)
doc: dt: bindings: usb: dwc3: Update entries for disabling SS instances in park mode
mmc: sdhci: do not enable card detect interrupt for gpio cd type
ALSA: usb-audio: Rewrite registration quirk handling
ACPI: video: Use native backlight on Acer Aspire 5783z
ALSA: usb-audio: Add registration quirk for Kingston HyperX Cloud Alpha S
Input: mms114 - add extra compatible for mms345l
ACPI: video: Use native backlight on Acer TravelMate 5735Z
ALSA: usb-audio: Add registration quirk for Kingston HyperX Cloud Flight S
iio:health:afe4404 Fix timestamp alignment and prevent data leak.
phy: sun4i-usb: fix dereference of pointer phy0 before it is null checked
arm64: dts: meson: add missing gxl rng clock
spi: spi-sun6i: sun6i_spi_transfer_one(): fix setting of clock rate
usb: gadget: udc: atmel: fix uninitialized read in debug printk
staging: comedi: verify array index is correct before using it
Revert "thermal: mediatek: fix register index error"
ARM: dts: socfpga: Align L2 cache-controller nodename with dtschema
regmap: debugfs: Don't sleep while atomic for fast_io regmaps
copy_xstate_to_kernel: Fix typo which caused GDB regression
apparmor: ensure that dfa state tables have entries
perf stat: Zero all the 'ena' and 'run' array slot stats for interval mode
soc: qcom: rpmh: Update dirty flag only when data changes
soc: qcom: rpmh: Invalidate SLEEP and WAKE TCSes before flushing new data
soc: qcom: rpmh-rsc: Clear active mode configuration for wake TCS
soc: qcom: rpmh-rsc: Allow using free WAKE TCS for active request
mtd: rawnand: marvell: Use nand_cleanup() when the device is not yet registered
mtd: rawnand: marvell: Fix probe error path
mtd: rawnand: timings: Fix default tR_max and tCCS_min timings
mtd: rawnand: brcmnand: fix CS0 layout
mtd: rawnand: oxnas: Keep track of registered devices
mtd: rawnand: oxnas: Unregister all devices on error
mtd: rawnand: oxnas: Release all devices in the _remove() path
slimbus: core: Fix mismatch in of_node_get/put
HID: magicmouse: do not set up autorepeat
HID: quirks: Always poll Obins Anne Pro 2 keyboard
HID: quirks: Ignore Simply Automated UPB PIM
ALSA: line6: Perform sanity check for each URB creation
ALSA: line6: Sync the pending work cancel at disconnection
ALSA: usb-audio: Fix race against the error recovery URB submission
ALSA: hda/realtek - change to suitable link model for ASUS platform
ALSA: hda/realtek - Enable Speaker for ASUS UX533 and UX534
USB: c67x00: fix use after free in c67x00_giveback_urb
usb: dwc2: Fix shutdown callback in platform
usb: chipidea: core: add wakeup support for extcon
usb: gadget: function: fix missing spinlock in f_uac1_legacy
USB: serial: iuu_phoenix: fix memory corruption
USB: serial: cypress_m8: enable Simply Automated UPB PIM
USB: serial: ch341: add new Product ID for CH340
USB: serial: option: add GosunCn GM500 series
USB: serial: option: add Quectel EG95 LTE modem
virt: vbox: Fix VBGL_IOCTL_VMMDEV_REQUEST_BIG and _LOG req numbers to match upstream
virt: vbox: Fix guest capabilities mask check
virtio: virtio_console: add missing MODULE_DEVICE_TABLE() for rproc serial
serial: mxs-auart: add missed iounmap() in probe failure and remove
ovl: inode reference leak in ovl_is_inuse true case.
ovl: relax WARN_ON() when decoding lower directory file handle
ovl: fix unneeded call to ovl_change_flags()
fuse: Fix parameter for FS_IOC_{GET,SET}FLAGS
Revert "zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO()"
mei: bus: don't clean driver pointer
Input: i8042 - add Lenovo XiaoXin Air 12 to i8042 nomux list
uio_pdrv_genirq: fix use without device tree and no interrupt
timer: Prevent base->clk from moving backward
timer: Fix wheel index calculation on last level
MIPS: Fix build for LTS kernel caused by backporting lpj adjustment
riscv: use 16KB kernel stack on 64-bit
hwmon: (emc2103) fix unable to change fan pwm1_enable attribute
powerpc/book3s64/pkeys: Fix pkey_access_permitted() for execute disable pkey
intel_th: pci: Add Jasper Lake CPU support
intel_th: pci: Add Tiger Lake PCH-H support
intel_th: pci: Add Emmitsburg PCH support
intel_th: Fix a NULL dereference when hub driver is not loaded
dmaengine: fsl-edma: Fix NULL pointer exception in fsl_edma_tx_handler
misc: atmel-ssc: lock with mutex instead of spinlock
thermal/drivers/cpufreq_cooling: Fix wrong frequency converted from power
arm64: ptrace: Override SPSR.SS when single-stepping is enabled
arm64: ptrace: Consistently use pseudo-singlestep exceptions
arm64: compat: Ensure upper 32 bits of x0 are zero on syscall return
sched: Fix unreliable rseq cpu_id for new tasks
sched/fair: handle case of task_h_load() returning 0
genirq/affinity: Handle affinity setting on inactive interrupts correctly
printk: queue wake_up_klogd irq_work only if per-CPU areas are ready
libceph: don't omit recovery_deletes in target_copy()
rxrpc: Fix trace string
spi: sprd: switch the sequence of setting WDG_LOAD_LOW and _HIGH
Linux 4.19.134
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ieeb9e03f4a2d51aeebe3a3eadd9c1b93a26088a0
