m68knommu: make 520x UART platform addressing consistent

If we make all UART addressing consistent across all ColdFire family members
then we will be able to remove the duplicated plaform data and use a single
setup for all.

So modify the ColdFire 520x UART addressing so that:

. UARTs are numbered from 0 up
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
This commit is contained in:
Greg Ungerer 2011-12-24 00:21:18 +10:00
parent 8400ca322e
commit ffc203bc19
2 changed files with 14 additions and 10 deletions

View file

@ -50,6 +50,10 @@
#define MCFINT_QSPI 31 /* Interrupt number for QSPI */
#define MCFINT_PIT1 4 /* Interrupt number for PIT1 (PIT0 in processor) */
#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0)
#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1)
#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2)
/*
* SDRAM configuration registers.
*/
@ -144,9 +148,9 @@
/*
* UART module.
*/
#define MCFUART_BASE1 0xFC060000 /* Base address of UART1 */
#define MCFUART_BASE2 0xFC064000 /* Base address of UART2 */
#define MCFUART_BASE3 0xFC068000 /* Base address of UART2 */
#define MCFUART_BASE0 0xFC060000 /* Base address of UART0 */
#define MCFUART_BASE1 0xFC064000 /* Base address of UART1 */
#define MCFUART_BASE2 0xFC068000 /* Base address of UART2 */
/*
* FEC module.

View file

@ -27,16 +27,16 @@
static struct mcf_platform_uart m520x_uart_platform[] = {
{
.mapbase = MCFUART_BASE1,
.irq = MCFINT_VECBASE + MCFINT_UART0,
.mapbase = MCFUART_BASE0,
.irq = MCF_IRQ_UART0,
},
{
.mapbase = MCFUART_BASE1,
.irq = MCF_IRQ_UART1,
},
{
.mapbase = MCFUART_BASE2,
.irq = MCFINT_VECBASE + MCFINT_UART1,
},
{
.mapbase = MCFUART_BASE3,
.irq = MCFINT_VECBASE + MCFINT_UART2,
.irq = MCF_IRQ_UART2,
},
{ },
};