From 80c394fab89649585089f5bd5013f2d99e5756ef Mon Sep 17 00:00:00 2001
From: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Date: Thu, 11 Jun 2015 13:27:51 +0200
Subject: [PATCH 001/140] cxl: Add explicit precision specifiers

C99 says that a precision given as simply '.' with no following digits
or * should be interpreted as 0. The kernel's printf implementation,
however, treats this case as if the precision was omitted. C99 also
says that if both the precision and value are 0, no digits should be
printed. Even if the kernel followed C99 to the letter, I don't think
that would be particularly useful in these cases. For consistency with
most other format strings in the file, use an explicit precision of 16
and add a 0x prefix.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/irq.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/misc/cxl/irq.c b/drivers/misc/cxl/irq.c
index 680cd263436d..2b64bb43b304 100644
--- a/drivers/misc/cxl/irq.c
+++ b/drivers/misc/cxl/irq.c
@@ -147,7 +147,7 @@ static irqreturn_t cxl_irq(int irq, void *data, struct cxl_irq_info *irq_info)
 	if (dsisr & CXL_PSL_DSISR_An_PE)
 		return handle_psl_slice_error(ctx, dsisr, irq_info->errstat);
 	if (dsisr & CXL_PSL_DSISR_An_AE) {
-		pr_devel("CXL interrupt: AFU Error %.llx\n", irq_info->afu_err);
+		pr_devel("CXL interrupt: AFU Error 0x%.16llx\n", irq_info->afu_err);
 
 		if (ctx->pending_afu_err) {
 			/*
@@ -158,7 +158,7 @@ static irqreturn_t cxl_irq(int irq, void *data, struct cxl_irq_info *irq_info)
 			 * probably best that we log them somewhere:
 			 */
 			dev_err_ratelimited(&ctx->afu->dev, "CXL AFU Error "
-					    "undelivered to pe %i: %.llx\n",
+					    "undelivered to pe %i: 0x%.16llx\n",
 					    ctx->pe, irq_info->afu_err);
 		} else {
 			spin_lock(&ctx->lock);

From de369538436ae0caf784c69187ad0e53152b7ddf Mon Sep 17 00:00:00 2001
From: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Date: Thu, 11 Jun 2015 13:27:52 +0200
Subject: [PATCH 002/140] cxl: use more common format specifier

A precision of 16 (%.16llx) has the same effect as a field width of 16
along with passing the 0 flag (%016llx), but the latter is much more
common in the kernel tree. Update cxl to use that.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/irq.c    | 32 ++++++++++++++++----------------
 drivers/misc/cxl/native.c | 10 +++++-----
 drivers/misc/cxl/pci.c    | 10 +++++-----
 drivers/misc/cxl/trace.h  | 10 +++++-----
 4 files changed, 31 insertions(+), 31 deletions(-)

diff --git a/drivers/misc/cxl/irq.c b/drivers/misc/cxl/irq.c
index 2b64bb43b304..abfce494ca6b 100644
--- a/drivers/misc/cxl/irq.c
+++ b/drivers/misc/cxl/irq.c
@@ -30,12 +30,12 @@ static irqreturn_t handle_psl_slice_error(struct cxl_context *ctx, u64 dsisr, u6
 	serr = cxl_p1n_read(ctx->afu, CXL_PSL_SERR_An);
 	afu_debug = cxl_p1n_read(ctx->afu, CXL_AFU_DEBUG_An);
 
-	dev_crit(&ctx->afu->dev, "PSL ERROR STATUS: 0x%.16llx\n", errstat);
-	dev_crit(&ctx->afu->dev, "PSL_FIR1: 0x%.16llx\n", fir1);
-	dev_crit(&ctx->afu->dev, "PSL_FIR2: 0x%.16llx\n", fir2);
-	dev_crit(&ctx->afu->dev, "PSL_SERR_An: 0x%.16llx\n", serr);
-	dev_crit(&ctx->afu->dev, "PSL_FIR_SLICE_An: 0x%.16llx\n", fir_slice);
-	dev_crit(&ctx->afu->dev, "CXL_PSL_AFU_DEBUG_An: 0x%.16llx\n", afu_debug);
+	dev_crit(&ctx->afu->dev, "PSL ERROR STATUS: 0x%016llx\n", errstat);
+	dev_crit(&ctx->afu->dev, "PSL_FIR1: 0x%016llx\n", fir1);
+	dev_crit(&ctx->afu->dev, "PSL_FIR2: 0x%016llx\n", fir2);
+	dev_crit(&ctx->afu->dev, "PSL_SERR_An: 0x%016llx\n", serr);
+	dev_crit(&ctx->afu->dev, "PSL_FIR_SLICE_An: 0x%016llx\n", fir_slice);
+	dev_crit(&ctx->afu->dev, "CXL_PSL_AFU_DEBUG_An: 0x%016llx\n", afu_debug);
 
 	dev_crit(&ctx->afu->dev, "STOPPING CXL TRACE\n");
 	cxl_stop_trace(ctx->afu->adapter);
@@ -54,10 +54,10 @@ irqreturn_t cxl_slice_irq_err(int irq, void *data)
 	fir_slice = cxl_p1n_read(afu, CXL_PSL_FIR_SLICE_An);
 	errstat = cxl_p2n_read(afu, CXL_PSL_ErrStat_An);
 	afu_debug = cxl_p1n_read(afu, CXL_AFU_DEBUG_An);
-	dev_crit(&afu->dev, "PSL_SERR_An: 0x%.16llx\n", serr);
-	dev_crit(&afu->dev, "PSL_FIR_SLICE_An: 0x%.16llx\n", fir_slice);
-	dev_crit(&afu->dev, "CXL_PSL_ErrStat_An: 0x%.16llx\n", errstat);
-	dev_crit(&afu->dev, "CXL_PSL_AFU_DEBUG_An: 0x%.16llx\n", afu_debug);
+	dev_crit(&afu->dev, "PSL_SERR_An: 0x%016llx\n", serr);
+	dev_crit(&afu->dev, "PSL_FIR_SLICE_An: 0x%016llx\n", fir_slice);
+	dev_crit(&afu->dev, "CXL_PSL_ErrStat_An: 0x%016llx\n", errstat);
+	dev_crit(&afu->dev, "CXL_PSL_AFU_DEBUG_An: 0x%016llx\n", afu_debug);
 
 	cxl_p1n_write(afu, CXL_PSL_SERR_An, serr);
 
@@ -72,7 +72,7 @@ static irqreturn_t cxl_irq_err(int irq, void *data)
 	WARN(1, "CXL ERROR interrupt %i\n", irq);
 
 	err_ivte = cxl_p1_read(adapter, CXL_PSL_ErrIVTE);
-	dev_crit(&adapter->dev, "PSL_ErrIVTE: 0x%.16llx\n", err_ivte);
+	dev_crit(&adapter->dev, "PSL_ErrIVTE: 0x%016llx\n", err_ivte);
 
 	dev_crit(&adapter->dev, "STOPPING CXL TRACE\n");
 	cxl_stop_trace(adapter);
@@ -80,7 +80,7 @@ static irqreturn_t cxl_irq_err(int irq, void *data)
 	fir1 = cxl_p1_read(adapter, CXL_PSL_FIR1);
 	fir2 = cxl_p1_read(adapter, CXL_PSL_FIR2);
 
-	dev_crit(&adapter->dev, "PSL_FIR1: 0x%.16llx\nPSL_FIR2: 0x%.16llx\n", fir1, fir2);
+	dev_crit(&adapter->dev, "PSL_FIR1: 0x%016llx\nPSL_FIR2: 0x%016llx\n", fir1, fir2);
 
 	return IRQ_HANDLED;
 }
@@ -147,7 +147,7 @@ static irqreturn_t cxl_irq(int irq, void *data, struct cxl_irq_info *irq_info)
 	if (dsisr & CXL_PSL_DSISR_An_PE)
 		return handle_psl_slice_error(ctx, dsisr, irq_info->errstat);
 	if (dsisr & CXL_PSL_DSISR_An_AE) {
-		pr_devel("CXL interrupt: AFU Error 0x%.16llx\n", irq_info->afu_err);
+		pr_devel("CXL interrupt: AFU Error 0x%016llx\n", irq_info->afu_err);
 
 		if (ctx->pending_afu_err) {
 			/*
@@ -158,7 +158,7 @@ static irqreturn_t cxl_irq(int irq, void *data, struct cxl_irq_info *irq_info)
 			 * probably best that we log them somewhere:
 			 */
 			dev_err_ratelimited(&ctx->afu->dev, "CXL AFU Error "
-					    "undelivered to pe %i: 0x%.16llx\n",
+					    "undelivered to pe %i: 0x%016llx\n",
 					    ctx->pe, irq_info->afu_err);
 		} else {
 			spin_lock(&ctx->lock);
@@ -211,8 +211,8 @@ static irqreturn_t cxl_irq_multiplexed(int irq, void *data)
 	}
 	rcu_read_unlock();
 
-	WARN(1, "Unable to demultiplex CXL PSL IRQ for PE %i DSISR %.16llx DAR"
-		" %.16llx\n(Possible AFU HW issue - was a term/remove acked"
+	WARN(1, "Unable to demultiplex CXL PSL IRQ for PE %i DSISR %016llx DAR"
+		" %016llx\n(Possible AFU HW issue - was a term/remove acked"
 		" with outstanding transactions?)\n", ph, irq_info.dsisr,
 		irq_info.dar);
 	return fail_psl_irq(afu, &irq_info);
diff --git a/drivers/misc/cxl/native.c b/drivers/misc/cxl/native.c
index 10567f245818..fc9310dd2367 100644
--- a/drivers/misc/cxl/native.c
+++ b/drivers/misc/cxl/native.c
@@ -41,7 +41,7 @@ static int afu_control(struct cxl_afu *afu, u64 command,
 			rc = -EBUSY;
 			goto out;
 		}
-		pr_devel_ratelimited("AFU control... (0x%.16llx)\n",
+		pr_devel_ratelimited("AFU control... (0x%016llx)\n",
 				     AFU_Cntl | command);
 		cpu_relax();
 		AFU_Cntl = cxl_p2n_read(afu, CXL_AFU_Cntl_An);
@@ -120,13 +120,13 @@ int cxl_psl_purge(struct cxl_afu *afu)
 			goto out;
 		}
 		dsisr = cxl_p2n_read(afu, CXL_PSL_DSISR_An);
-		pr_devel_ratelimited("PSL purging... PSL_CNTL: 0x%.16llx  PSL_DSISR: 0x%.16llx\n", PSL_CNTL, dsisr);
+		pr_devel_ratelimited("PSL purging... PSL_CNTL: 0x%016llx  PSL_DSISR: 0x%016llx\n", PSL_CNTL, dsisr);
 		if (dsisr & CXL_PSL_DSISR_TRANS) {
 			dar = cxl_p2n_read(afu, CXL_PSL_DAR_An);
-			dev_notice(&afu->dev, "PSL purge terminating pending translation, DSISR: 0x%.16llx, DAR: 0x%.16llx\n", dsisr, dar);
+			dev_notice(&afu->dev, "PSL purge terminating pending translation, DSISR: 0x%016llx, DAR: 0x%016llx\n", dsisr, dar);
 			cxl_p2n_write(afu, CXL_PSL_TFC_An, CXL_PSL_TFC_An_AE);
 		} else if (dsisr) {
-			dev_notice(&afu->dev, "PSL purge acknowledging pending non-translation fault, DSISR: 0x%.16llx\n", dsisr);
+			dev_notice(&afu->dev, "PSL purge acknowledging pending non-translation fault, DSISR: 0x%016llx\n", dsisr);
 			cxl_p2n_write(afu, CXL_PSL_TFC_An, CXL_PSL_TFC_An_A);
 		} else {
 			cpu_relax();
@@ -684,7 +684,7 @@ static void recover_psl_err(struct cxl_afu *afu, u64 errstat)
 {
 	u64 dsisr;
 
-	pr_devel("RECOVERING FROM PSL ERROR... (0x%.16llx)\n", errstat);
+	pr_devel("RECOVERING FROM PSL ERROR... (0x%016llx)\n", errstat);
 
 	/* Clear PSL_DSISR[PE] */
 	dsisr = cxl_p2n_read(afu, CXL_PSL_DSISR_An);
diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index 32ad09705949..eb05efb74eed 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -656,7 +656,7 @@ static int sanitise_afu_regs(struct cxl_afu *afu)
 	 */
 	reg = cxl_p2n_read(afu, CXL_AFU_Cntl_An);
 	if ((reg & CXL_AFU_Cntl_An_ES_MASK) != CXL_AFU_Cntl_An_ES_Disabled) {
-		dev_warn(&afu->dev, "WARNING: AFU was not disabled: %#.16llx\n", reg);
+		dev_warn(&afu->dev, "WARNING: AFU was not disabled: %#016llx\n", reg);
 		if (__cxl_afu_reset(afu))
 			return -EIO;
 		if (cxl_afu_disable(afu))
@@ -677,7 +677,7 @@ static int sanitise_afu_regs(struct cxl_afu *afu)
 	cxl_p2n_write(afu, CXL_SSTP0_An, 0x0000000000000000);
 	reg = cxl_p2n_read(afu, CXL_PSL_DSISR_An);
 	if (reg) {
-		dev_warn(&afu->dev, "AFU had pending DSISR: %#.16llx\n", reg);
+		dev_warn(&afu->dev, "AFU had pending DSISR: %#016llx\n", reg);
 		if (reg & CXL_PSL_DSISR_TRANS)
 			cxl_p2n_write(afu, CXL_PSL_TFC_An, CXL_PSL_TFC_An_AE);
 		else
@@ -686,12 +686,12 @@ static int sanitise_afu_regs(struct cxl_afu *afu)
 	reg = cxl_p1n_read(afu, CXL_PSL_SERR_An);
 	if (reg) {
 		if (reg & ~0xffff)
-			dev_warn(&afu->dev, "AFU had pending SERR: %#.16llx\n", reg);
+			dev_warn(&afu->dev, "AFU had pending SERR: %#016llx\n", reg);
 		cxl_p1n_write(afu, CXL_PSL_SERR_An, reg & ~0xffff);
 	}
 	reg = cxl_p2n_read(afu, CXL_PSL_ErrStat_An);
 	if (reg) {
-		dev_warn(&afu->dev, "AFU had pending error status: %#.16llx\n", reg);
+		dev_warn(&afu->dev, "AFU had pending error status: %#016llx\n", reg);
 		cxl_p2n_write(afu, CXL_PSL_ErrStat_An, reg);
 	}
 
@@ -893,7 +893,7 @@ static int cxl_map_adapter_regs(struct cxl *adapter, struct pci_dev *dev)
 	if (pci_request_region(dev, 0, "priv 1 regs"))
 		goto err2;
 
-	pr_devel("cxl_map_adapter_regs: p1: %#.16llx %#llx, p2: %#.16llx %#llx",
+	pr_devel("cxl_map_adapter_regs: p1: %#016llx %#llx, p2: %#016llx %#llx",
 			p1_base(dev), p1_size(dev), p2_base(dev), p2_size(dev));
 
 	if (!(adapter->p1_mmio = ioremap(p1_base(dev), p1_size(dev))))
diff --git a/drivers/misc/cxl/trace.h b/drivers/misc/cxl/trace.h
index ae434d87887e..6e1e2adfba8e 100644
--- a/drivers/misc/cxl/trace.h
+++ b/drivers/misc/cxl/trace.h
@@ -105,7 +105,7 @@ TRACE_EVENT(cxl_attach,
 		__entry->num_interrupts = num_interrupts;
 	),
 
-	TP_printk("afu%i.%i pid=%i pe=%i wed=0x%.16llx irqs=%i amr=0x%llx",
+	TP_printk("afu%i.%i pid=%i pe=%i wed=0x%016llx irqs=%i amr=0x%llx",
 		__entry->card,
 		__entry->afu,
 		__entry->pid,
@@ -177,7 +177,7 @@ TRACE_EVENT(cxl_psl_irq,
 		__entry->dar = dar;
 	),
 
-	TP_printk("afu%i.%i pe=%i irq=%i dsisr=%s dar=0x%.16llx",
+	TP_printk("afu%i.%i pe=%i irq=%i dsisr=%s dar=0x%016llx",
 		__entry->card,
 		__entry->afu,
 		__entry->pe,
@@ -233,7 +233,7 @@ TRACE_EVENT(cxl_ste_miss,
 		__entry->dar = dar;
 	),
 
-	TP_printk("afu%i.%i pe=%i dar=0x%.16llx",
+	TP_printk("afu%i.%i pe=%i dar=0x%016llx",
 		__entry->card,
 		__entry->afu,
 		__entry->pe,
@@ -264,7 +264,7 @@ TRACE_EVENT(cxl_ste_write,
 		__entry->v = v;
 	),
 
-	TP_printk("afu%i.%i pe=%i SSTE[%i] E=0x%.16llx V=0x%.16llx",
+	TP_printk("afu%i.%i pe=%i SSTE[%i] E=0x%016llx V=0x%016llx",
 		__entry->card,
 		__entry->afu,
 		__entry->pe,
@@ -295,7 +295,7 @@ TRACE_EVENT(cxl_pte_miss,
 		__entry->dar = dar;
 	),
 
-	TP_printk("afu%i.%i pe=%i dsisr=%s dar=0x%.16llx",
+	TP_printk("afu%i.%i pe=%i dsisr=%s dar=0x%016llx",
 		__entry->card,
 		__entry->afu,
 		__entry->pe,

From 2db4928bb559f8b43ca75879548111dc13a7de31 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Wed, 24 Jun 2015 15:25:22 +1000
Subject: [PATCH 003/140] powerpc/iommu: Remove dma_data union

To support "hybrid" DMA ops in a subsequent patch, we will need both
a direct DMA offset and an iommu pointer. Those are currently exclusive
(a union), so change them to be separate fields.

While there, also type iommu_table_base properly and make exist only
on CONFIG_PPC64 since it's not referenced on 32-bit at all.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/device.h      | 15 ++++++++-----
 arch/powerpc/include/asm/dma-mapping.h |  4 ++--
 arch/powerpc/include/asm/iommu.h       | 31 +++++++++++++++++++++-----
 3 files changed, 36 insertions(+), 14 deletions(-)

diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index e9bdda88f1fb..406c2b1ff82d 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -10,6 +10,7 @@ struct dma_map_ops;
 struct device_node;
 #ifdef CONFIG_PPC64
 struct pci_dn;
+struct iommu_table;
 #endif
 
 /*
@@ -23,13 +24,15 @@ struct dev_archdata {
 	struct dma_map_ops	*dma_ops;
 
 	/*
-	 * When an iommu is in use, dma_data is used as a ptr to the base of the
-	 * iommu_table.  Otherwise, it is a simple numerical offset.
+	 * These two used to be a union. However, with the hybrid ops we need
+	 * both so here we store both a DMA offset for direct mappings and
+	 * an iommu_table for remapped DMA.
 	 */
-	union {
-		dma_addr_t	dma_offset;
-		void		*iommu_table_base;
-	} dma_data;
+	dma_addr_t		dma_offset;
+
+#ifdef CONFIG_PPC64
+	struct iommu_table	*iommu_table_base;
+#endif
 
 #ifdef CONFIG_IOMMU_API
 	void			*iommu_domain;
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 9103687b0436..9cbbc9e415fe 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -106,7 +106,7 @@ static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops)
 static inline dma_addr_t get_dma_offset(struct device *dev)
 {
 	if (dev)
-		return dev->archdata.dma_data.dma_offset;
+		return dev->archdata.dma_offset;
 
 	return PCI_DRAM_OFFSET;
 }
@@ -114,7 +114,7 @@ static inline dma_addr_t get_dma_offset(struct device *dev)
 static inline void set_dma_offset(struct device *dev, dma_addr_t off)
 {
 	if (dev)
-		dev->archdata.dma_data.dma_offset = off;
+		dev->archdata.dma_offset = off;
 }
 
 /* this will be removed soon */
diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h
index ca18cff90900..7b87bab09564 100644
--- a/arch/powerpc/include/asm/iommu.h
+++ b/arch/powerpc/include/asm/iommu.h
@@ -2,17 +2,17 @@
  * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
  * Rewrite, cleanup:
  * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
- * 
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- * 
+ *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- * 
+ *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
@@ -131,16 +131,21 @@ int get_iommu_order(unsigned long size, struct iommu_table *tbl)
 
 struct scatterlist;
 
-static inline void set_iommu_table_base(struct device *dev, void *base)
+#ifdef CONFIG_PPC64
+
+static inline void set_iommu_table_base(struct device *dev,
+					struct iommu_table *base)
 {
-	dev->archdata.dma_data.iommu_table_base = base;
+	dev->archdata.iommu_table_base = base;
 }
 
 static inline void *get_iommu_table_base(struct device *dev)
 {
-	return dev->archdata.dma_data.iommu_table_base;
+	return dev->archdata.iommu_table_base;
 }
 
+extern int dma_iommu_dma_supported(struct device *dev, u64 mask);
+
 /* Frees table for an individual device node */
 extern void iommu_free_table(struct iommu_table *tbl, const char *node_name);
 
@@ -225,6 +230,20 @@ static inline int __init tce_iommu_bus_notifier_init(void)
 }
 #endif /* !CONFIG_IOMMU_API */
 
+#else
+
+static inline void *get_iommu_table_base(struct device *dev)
+{
+	return NULL;
+}
+
+static inline int dma_iommu_dma_supported(struct device *dev, u64 mask)
+{
+	return 0;
+}
+
+#endif /* CONFIG_PPC64 */
+
 extern int ppc_iommu_map_sg(struct device *dev, struct iommu_table *tbl,
 			    struct scatterlist *sglist, int nelems,
 			    unsigned long mask,

From e91c25111aa373af7439d97ab0e606bcffd599ef Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Wed, 24 Jun 2015 15:25:27 +1000
Subject: [PATCH 004/140] powerpc/iommu: Cleanup setting of DMA base/offset

Now that the table and the offset can co-exist, we no longer need
to flip/flop, we can just establish both once at boot time.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/platforms/powernv/pci-ioda.c |  3 +--
 arch/powerpc/platforms/pseries/iommu.c    |  3 +--
 arch/powerpc/sysdev/dart_iommu.c          | 16 +++-------------
 3 files changed, 5 insertions(+), 17 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 5738d315248b..2c286b57e520 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1620,11 +1620,9 @@ static int pnv_pci_ioda_dma_set_mask(struct pci_dev *pdev, u64 dma_mask)
 	if (bypass) {
 		dev_info(&pdev->dev, "Using 64-bit DMA iommu bypass\n");
 		set_dma_ops(&pdev->dev, &dma_direct_ops);
-		set_dma_offset(&pdev->dev, pe->tce_bypass_base);
 	} else {
 		dev_info(&pdev->dev, "Using 32-bit DMA via iommu\n");
 		set_dma_ops(&pdev->dev, &dma_iommu_ops);
-		set_iommu_table_base(&pdev->dev, pe->table_group.tables[0]);
 	}
 	*pdev->dev.dma_mask = dma_mask;
 	return 0;
@@ -1659,6 +1657,7 @@ static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe,
 
 	list_for_each_entry(dev, &bus->devices, bus_list) {
 		set_iommu_table_base(&dev->dev, pe->table_group.tables[0]);
+		set_dma_offset(&dev->dev, pe->tce_bypass_base);
 		iommu_add_device(&dev->dev);
 
 		if ((pe->flags & PNV_IODA_PE_BUS_ALL) && dev->subordinate)
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 10510dea16b3..0946b98d75d4 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -1253,11 +1253,10 @@ static int dma_set_mask_pSeriesLP(struct device *dev, u64 dma_mask)
 		}
 	}
 
-	/* fall back on iommu ops, restore table pointer with ops */
+	/* fall back on iommu ops */
 	if (!ddw_enabled && get_dma_ops(dev) != &dma_iommu_ops) {
 		dev_info(dev, "Restoring 32-bit DMA via iommu\n");
 		set_dma_ops(dev, &dma_iommu_ops);
-		pci_dma_dev_setup_pSeriesLP(pdev);
 	}
 
 check_mask:
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index 90bcdfeedf48..b7348637eae0 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -313,20 +313,11 @@ static void iommu_table_dart_setup(void)
 	set_bit(iommu_table_dart.it_size - 1, iommu_table_dart.it_map);
 }
 
-static void dma_dev_setup_dart(struct device *dev)
-{
-	/* We only have one iommu table on the mac for now, which makes
-	 * things simple. Setup all PCI devices to point to this table
-	 */
-	if (get_dma_ops(dev) == &dma_direct_ops)
-		set_dma_offset(dev, DART_U4_BYPASS_BASE);
-	else
-		set_iommu_table_base(dev, &iommu_table_dart);
-}
-
 static void pci_dma_dev_setup_dart(struct pci_dev *dev)
 {
-	dma_dev_setup_dart(&dev->dev);
+	if (dart_is_u4)
+		set_dma_offset(&dev->dev, DART_U4_BYPASS_BASE);
+	set_iommu_table_base(&dev->dev, &iommu_table_dart);
 }
 
 static void pci_dma_bus_setup_dart(struct pci_bus *bus)
@@ -370,7 +361,6 @@ static int dart_dma_set_mask(struct device *dev, u64 dma_mask)
 		dev_info(dev, "Using 32-bit DMA via iommu\n");
 		set_dma_ops(dev, &dma_iommu_ops);
 	}
-	dma_dev_setup_dart(dev);
 
 	*dev->dma_mask = dma_mask;
 	return 0;

From 817820b0226a1376f0fc68827ab8e42d86431117 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Wed, 24 Jun 2015 15:25:31 +1000
Subject: [PATCH 005/140] powerpc/iommu: Support "hybrid" iommu/direct DMA ops
 for coherent_mask < dma_mask

This patch adds the ability to the DMA direct ops to fallback to the IOMMU
ops for coherent alloc/free if the coherent mask of the device isn't
suitable for accessing the direct DMA space and the device also happens
to have an active IOMMU table.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/Kconfig                   |   4 +
 arch/powerpc/include/asm/dma-mapping.h |  10 +--
 arch/powerpc/kernel/dma-iommu.c        |   2 +-
 arch/powerpc/kernel/dma-swiotlb.c      |   4 +-
 arch/powerpc/kernel/dma.c              | 111 +++++++++++++++++++++----
 5 files changed, 105 insertions(+), 26 deletions(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 5ef27113b898..fe2f2c595fd9 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -82,6 +82,9 @@ config GENERIC_HWEIGHT
 	bool
 	default y
 
+config ARCH_HAS_DMA_SET_COHERENT_MASK
+        bool
+
 config PPC
 	bool
 	default y
@@ -155,6 +158,7 @@ config PPC
 	select HAVE_PERF_EVENTS_NMI if PPC64
 	select EDAC_SUPPORT
 	select EDAC_ATOMIC_SCRUB
+	select ARCH_HAS_DMA_SET_COHERENT_MASK
 
 config GENERIC_CSUM
 	def_bool CPU_LITTLE_ENDIAN
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 9cbbc9e415fe..710f60e380e0 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -21,12 +21,12 @@
 #define DMA_ERROR_CODE		(~(dma_addr_t)0x0)
 
 /* Some dma direct funcs must be visible for use in other dma_ops */
-extern void *dma_direct_alloc_coherent(struct device *dev, size_t size,
-				       dma_addr_t *dma_handle, gfp_t flag,
+extern void *__dma_direct_alloc_coherent(struct device *dev, size_t size,
+					 dma_addr_t *dma_handle, gfp_t flag,
+					 struct dma_attrs *attrs);
+extern void __dma_direct_free_coherent(struct device *dev, size_t size,
+				       void *vaddr, dma_addr_t dma_handle,
 				       struct dma_attrs *attrs);
-extern void dma_direct_free_coherent(struct device *dev, size_t size,
-				     void *vaddr, dma_addr_t dma_handle,
-				     struct dma_attrs *attrs);
 extern int dma_direct_mmap_coherent(struct device *dev,
 				    struct vm_area_struct *vma,
 				    void *cpu_addr, dma_addr_t handle,
diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
index 4c68bfe4108a..41a7d9d49a5a 100644
--- a/arch/powerpc/kernel/dma-iommu.c
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -73,7 +73,7 @@ static void dma_iommu_unmap_sg(struct device *dev, struct scatterlist *sglist,
 }
 
 /* We support DMA to/from any memory page via the iommu */
-static int dma_iommu_dma_supported(struct device *dev, u64 mask)
+int dma_iommu_dma_supported(struct device *dev, u64 mask)
 {
 	struct iommu_table *tbl = get_iommu_table_base(dev);
 
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index 6e8d764ce47b..c6689f658b50 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -47,8 +47,8 @@ static u64 swiotlb_powerpc_get_required(struct device *dev)
  * for everything else.
  */
 struct dma_map_ops swiotlb_dma_ops = {
-	.alloc = dma_direct_alloc_coherent,
-	.free = dma_direct_free_coherent,
+	.alloc = __dma_direct_alloc_coherent,
+	.free = __dma_direct_free_coherent,
 	.mmap = dma_direct_mmap_coherent,
 	.map_sg = swiotlb_map_sg_attrs,
 	.unmap_sg = swiotlb_unmap_sg_attrs,
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 35e4dcc5dce3..1558f81ac1ff 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -16,6 +16,7 @@
 #include <asm/bug.h>
 #include <asm/machdep.h>
 #include <asm/swiotlb.h>
+#include <asm/iommu.h>
 
 /*
  * Generic direct DMA implementation
@@ -39,9 +40,31 @@ static u64 __maybe_unused get_pfn_limit(struct device *dev)
 	return pfn;
 }
 
-void *dma_direct_alloc_coherent(struct device *dev, size_t size,
-				dma_addr_t *dma_handle, gfp_t flag,
-				struct dma_attrs *attrs)
+static int dma_direct_dma_supported(struct device *dev, u64 mask)
+{
+#ifdef CONFIG_PPC64
+	u64 limit = get_dma_offset(dev) + (memblock_end_of_DRAM() - 1);
+
+	/* Limit fits in the mask, we are good */
+	if (mask >= limit)
+		return 1;
+
+#ifdef CONFIG_FSL_SOC
+	/* Freescale gets another chance via ZONE_DMA/ZONE_DMA32, however
+	 * that will have to be refined if/when they support iommus
+	 */
+	return 1;
+#endif
+	/* Sorry ... */
+	return 0;
+#else
+	return 1;
+#endif
+}
+
+void *__dma_direct_alloc_coherent(struct device *dev, size_t size,
+				  dma_addr_t *dma_handle, gfp_t flag,
+				  struct dma_attrs *attrs)
 {
 	void *ret;
 #ifdef CONFIG_NOT_COHERENT_CACHE
@@ -96,9 +119,9 @@ void *dma_direct_alloc_coherent(struct device *dev, size_t size,
 #endif
 }
 
-void dma_direct_free_coherent(struct device *dev, size_t size,
-			      void *vaddr, dma_addr_t dma_handle,
-			      struct dma_attrs *attrs)
+void __dma_direct_free_coherent(struct device *dev, size_t size,
+				void *vaddr, dma_addr_t dma_handle,
+				struct dma_attrs *attrs)
 {
 #ifdef CONFIG_NOT_COHERENT_CACHE
 	__dma_free_coherent(size, vaddr);
@@ -107,6 +130,51 @@ void dma_direct_free_coherent(struct device *dev, size_t size,
 #endif
 }
 
+static void *dma_direct_alloc_coherent(struct device *dev, size_t size,
+				       dma_addr_t *dma_handle, gfp_t flag,
+				       struct dma_attrs *attrs)
+{
+	struct iommu_table *iommu;
+
+	/* The coherent mask may be smaller than the real mask, check if
+	 * we can really use the direct ops
+	 */
+	if (dma_direct_dma_supported(dev, dev->coherent_dma_mask))
+		return __dma_direct_alloc_coherent(dev, size, dma_handle,
+						   flag, attrs);
+
+	/* Ok we can't ... do we have an iommu ? If not, fail */
+	iommu = get_iommu_table_base(dev);
+	if (!iommu)
+		return NULL;
+
+	/* Try to use the iommu */
+	return iommu_alloc_coherent(dev, iommu, size, dma_handle,
+				    dev->coherent_dma_mask, flag,
+				    dev_to_node(dev));
+}
+
+static void dma_direct_free_coherent(struct device *dev, size_t size,
+				     void *vaddr, dma_addr_t dma_handle,
+				     struct dma_attrs *attrs)
+{
+	struct iommu_table *iommu;
+
+	/* See comments in dma_direct_alloc_coherent() */
+	if (dma_direct_dma_supported(dev, dev->coherent_dma_mask))
+		return __dma_direct_free_coherent(dev, size, vaddr, dma_handle,
+						  attrs);
+	/* Maybe we used an iommu ... */
+	iommu = get_iommu_table_base(dev);
+
+	/* If we hit that we should have never allocated in the first
+	 * place so how come we are freeing ?
+	 */
+	if (WARN_ON(!iommu))
+		return;
+	iommu_free_coherent(iommu, size, vaddr, dma_handle);
+}
+
 int dma_direct_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
 			     void *cpu_addr, dma_addr_t handle, size_t size,
 			     struct dma_attrs *attrs)
@@ -147,18 +215,6 @@ static void dma_direct_unmap_sg(struct device *dev, struct scatterlist *sg,
 {
 }
 
-static int dma_direct_dma_supported(struct device *dev, u64 mask)
-{
-#ifdef CONFIG_PPC64
-	/* Could be improved so platforms can set the limit in case
-	 * they have limited DMA windows
-	 */
-	return mask >= get_dma_offset(dev) + (memblock_end_of_DRAM() - 1);
-#else
-	return 1;
-#endif
-}
-
 static u64 dma_direct_get_required_mask(struct device *dev)
 {
 	u64 end, mask;
@@ -230,6 +286,25 @@ struct dma_map_ops dma_direct_ops = {
 };
 EXPORT_SYMBOL(dma_direct_ops);
 
+int dma_set_coherent_mask(struct device *dev, u64 mask)
+{
+	if (!dma_supported(dev, mask)) {
+		/*
+		 * We need to special case the direct DMA ops which can
+		 * support a fallback for coherent allocations. There
+		 * is no dma_op->set_coherent_mask() so we have to do
+		 * things the hard way:
+		 */
+		if (get_dma_ops(dev) != &dma_direct_ops ||
+		    get_iommu_table_base(dev) == NULL ||
+		    !dma_iommu_dma_supported(dev, mask))
+			return -EIO;
+	}
+	dev->coherent_dma_mask = mask;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dma_set_coherent_mask);
+
 #define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16)
 
 int __dma_set_mask(struct device *dev, u64 dma_mask)

From e8a4fd0afe05d5213d809fa686d3b8319464acfd Mon Sep 17 00:00:00 2001
From: Michael Ellerman <mpe@ellerman.id.au>
Date: Fri, 29 Aug 2014 17:01:43 +1000
Subject: [PATCH 006/140] powerpc: Add macros for the ibm_architecture_vec[]
 lengths

The encoding of the lengths in the ibm_architecture_vec array is
"interesting" to say the least. It's non-obvious how the number of bytes
we provide relates to the length value.

In fact we already got it wrong once, see 11e9ed43ca8a "Fix up
ibm_architecture_vec definition".

So add some macros to make it (hopefully) clearer. These at least have
the property that the integer present in the code is equal to the number
of bytes that follows it.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Stewart Smith <stewart@linux.vnet.ibm.com>
---
 arch/powerpc/kernel/prom_init.c | 25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index fcca8077e6a2..15099c41622e 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -641,6 +641,15 @@ static void __init early_cmdline_parse(void)
 #define W(x)	((x) >> 24) & 0xff, ((x) >> 16) & 0xff, \
 		((x) >> 8) & 0xff, (x) & 0xff
 
+/* Firmware expects the value to be n - 1, where n is the # of vectors */
+#define NUM_VECTORS(n)		((n) - 1)
+
+/*
+ * Firmware expects 1 + n - 2, where n is the length of the option vector in
+ * bytes. The 1 accounts for the length byte itself, the - 2 .. ?
+ */
+#define VECTOR_LENGTH(n)	(1 + (n) - 2)
+
 unsigned char ibm_architecture_vec[] = {
 	W(0xfffe0000), W(0x003a0000),	/* POWER5/POWER5+ */
 	W(0xffff0000), W(0x003e0000),	/* POWER6 */
@@ -651,16 +660,16 @@ unsigned char ibm_architecture_vec[] = {
 	W(0xffffffff), W(0x0f000003),	/* all 2.06-compliant */
 	W(0xffffffff), W(0x0f000002),	/* all 2.05-compliant */
 	W(0xfffffffe), W(0x0f000001),	/* all 2.04-compliant and earlier */
-	6 - 1,				/* 6 option vectors */
+	NUM_VECTORS(6),			/* 6 option vectors */
 
 	/* option vector 1: processor architectures supported */
-	3 - 2,				/* length */
+	VECTOR_LENGTH(2),		/* length */
 	0,				/* don't ignore, don't halt */
 	OV1_PPC_2_00 | OV1_PPC_2_01 | OV1_PPC_2_02 | OV1_PPC_2_03 |
 	OV1_PPC_2_04 | OV1_PPC_2_05 | OV1_PPC_2_06 | OV1_PPC_2_07,
 
 	/* option vector 2: Open Firmware options supported */
-	34 - 2,				/* length */
+	VECTOR_LENGTH(33),		/* length */
 	OV2_REAL_MODE,
 	0, 0,
 	W(0xffffffff),			/* real_base */
@@ -674,17 +683,17 @@ unsigned char ibm_architecture_vec[] = {
 	48,				/* max log_2(hash table size) */
 
 	/* option vector 3: processor options supported */
-	3 - 2,				/* length */
+	VECTOR_LENGTH(2),		/* length */
 	0,				/* don't ignore, don't halt */
 	OV3_FP | OV3_VMX | OV3_DFP,
 
 	/* option vector 4: IBM PAPR implementation */
-	3 - 2,				/* length */
+	VECTOR_LENGTH(2),		/* length */
 	0,				/* don't halt */
 	OV4_MIN_ENT_CAP,		/* minimum VP entitled capacity */
 
 	/* option vector 5: PAPR/OF options */
-	19 - 2,				/* length */
+	VECTOR_LENGTH(18),		/* length */
 	0,				/* don't ignore, don't halt */
 	OV5_FEAT(OV5_LPAR) | OV5_FEAT(OV5_SPLPAR) | OV5_FEAT(OV5_LARGE_PAGES) |
 	OV5_FEAT(OV5_DRCONF_MEMORY) | OV5_FEAT(OV5_DONATE_DEDICATE_CPU) |
@@ -717,12 +726,12 @@ unsigned char ibm_architecture_vec[] = {
 	OV5_FEAT(OV5_PFO_HW_RNG) | OV5_FEAT(OV5_PFO_HW_ENCR) |
 	OV5_FEAT(OV5_PFO_HW_842),
 	OV5_FEAT(OV5_SUB_PROCESSORS),
+
 	/* option vector 6: IBM PAPR hints */
-	4 - 2,				/* length */
+	VECTOR_LENGTH(3),		/* length */
 	0,
 	0,
 	OV6_LINUX,
-
 };
 
 /* Old method - ELF header with PT_NOTE sections only works on BE */

From 1c53973172f84fafa8ad94f17ac427fdd4f260a2 Mon Sep 17 00:00:00 2001
From: Anton Blanchard <anton@samba.org>
Date: Tue, 7 Jul 2015 13:56:59 +1000
Subject: [PATCH 007/140] powerpc: Remove mtmsrd(), use existing mtmsr()

mtmsr() does the right thing on 32bit and 64bit, so use it everywhere.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/reg.h          | 3 +--
 arch/powerpc/oprofile/op_model_power4.c | 4 ++--
 2 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index af56b5c6c81a..bb2758819bc9 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -1193,8 +1193,7 @@
 #ifdef CONFIG_PPC_BOOK3S_64
 #define __mtmsrd(v, l)	asm volatile("mtmsrd %0," __stringify(l) \
 				     : : "r" (v) : "memory")
-#define mtmsrd(v)	__mtmsrd((v), 0)
-#define mtmsr(v)	mtmsrd(v)
+#define mtmsr(v)	__mtmsrd((v), 0)
 #else
 #define mtmsr(v)	asm volatile("mtmsr %0" : \
 				     : "r" ((unsigned long)(v)) \
diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c
index 962fe7b3e3fb..4b32e9404bbe 100644
--- a/arch/powerpc/oprofile/op_model_power4.c
+++ b/arch/powerpc/oprofile/op_model_power4.c
@@ -207,7 +207,7 @@ static int power4_start(struct op_counter_config *ctr)
 	unsigned int mmcr0;
 
 	/* set the PMM bit (see comment below) */
-	mtmsrd(mfmsr() | MSR_PMM);
+	mtmsr(mfmsr() | MSR_PMM);
 
 	for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) {
 		if (ctr[i].enabled) {
@@ -377,7 +377,7 @@ static void power4_handle_interrupt(struct pt_regs *regs,
 	is_kernel = get_kernel(pc, mmcra);
 
 	/* set the PMM bit (see comment below) */
-	mtmsrd(mfmsr() | MSR_PMM);
+	mtmsr(mfmsr() | MSR_PMM);
 
 	/* Check that the SIAR  valid bit in MMCRA is set to 1. */
 	if ((mmcra & MMCRA_SIAR_VALID_MASK) == MMCRA_SIAR_VALID_MASK)

From e9dc4d7f72a375020ecbc9ca35b098fd9018910b Mon Sep 17 00:00:00 2001
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
Date: Fri, 19 Jun 2015 12:26:16 +1000
Subject: [PATCH 008/140] powerpc/powernv: Allow to reserve one PE for multiple
 times

The PE numbers are reserved according to root port's M64 window,
which is aligned to M64 segment finely. So one PE shouldn't be
reserved for multiple times. We will reserve PE numbers according
to the M64 BARs of PCI device in subsequent patches, which aren't
aligned to M64 segment size finely. It means one particular PE
could be reserved for multiple times.

The patch allows one PE to be reserved for multiple times and we
print the warning message at debugging level.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/platforms/powernv/pci-ioda.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 2c286b57e520..4775f9544f5c 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -140,11 +140,9 @@ static void pnv_ioda_reserve_pe(struct pnv_phb *phb, int pe_no)
 		return;
 	}
 
-	if (test_and_set_bit(pe_no, phb->ioda.pe_alloc)) {
-		pr_warn("%s: PE %d was assigned on PHB#%x\n",
-			__func__, pe_no, phb->hose->global_number);
-		return;
-	}
+	if (test_and_set_bit(pe_no, phb->ioda.pe_alloc))
+		pr_debug("%s: PE %d was reserved on PHB#%x\n",
+			 __func__, pe_no, phb->hose->global_number);
 
 	phb->ioda.pe_array[pe_no].phb = phb;
 	phb->ioda.pe_array[pe_no].pe_number = pe_no;

From 96a2f92bf8a4d0bf4a49bdd6539561a2c3289f37 Mon Sep 17 00:00:00 2001
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
Date: Fri, 19 Jun 2015 12:26:17 +1000
Subject: [PATCH 009/140] powerpc/powernv: Reserve M64 PEs based on BARs

On PHB3, some PEs might be reserved in advance to reflect the M64
segments consumed by those PEs. We're reserving PEs based on the
M64 window of root port, which might contain VF BAR. The PEs for
VFs are allocated dynamically, not reserved based on the consumed
M64 segments. So the M64 window of root port isn't reliable for
the task. Instead, we go through M64 BARs (VF BARs excluded) of
PCI devices under the specified root bus and reserve PEs accordingly,
as the patch does.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/platforms/powernv/pci-ioda.c | 54 +++++++++++++++--------
 arch/powerpc/platforms/powernv/pci.h      |  3 +-
 2 files changed, 37 insertions(+), 20 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 4775f9544f5c..51a4dfe588d2 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -229,32 +229,48 @@ static int pnv_ioda2_init_m64(struct pnv_phb *phb)
 	return -EIO;
 }
 
-static void pnv_ioda2_reserve_m64_pe(struct pnv_phb *phb)
+static void pnv_ioda2_reserve_dev_m64_pe(struct pci_dev *pdev,
+					 unsigned long *pe_bitmap)
 {
-	resource_size_t sgsz = phb->ioda.m64_segsize;
-	struct pci_dev *pdev;
+	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+	struct pnv_phb *phb = hose->private_data;
 	struct resource *r;
-	int base, step, i;
+	resource_size_t base, sgsz, start, end;
+	int segno, i;
 
-	/*
-	 * Root bus always has full M64 range and root port has
-	 * M64 range used in reality. So we're checking root port
-	 * instead of root bus.
-	 */
-	list_for_each_entry(pdev, &phb->hose->bus->devices, bus_list) {
-		for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) {
-			r = &pdev->resource[PCI_BRIDGE_RESOURCES + i];
-			if (!r->parent ||
-			    !pnv_pci_is_mem_pref_64(r->flags))
-				continue;
+	base = phb->ioda.m64_base;
+	sgsz = phb->ioda.m64_segsize;
+	for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+		r = &pdev->resource[i];
+		if (!r->parent || !pnv_pci_is_mem_pref_64(r->flags))
+			continue;
 
-			base = (r->start - phb->ioda.m64_base) / sgsz;
-			for (step = 0; step < resource_size(r) / sgsz; step++)
-				pnv_ioda_reserve_pe(phb, base + step);
+		start = _ALIGN_DOWN(r->start - base, sgsz);
+		end = _ALIGN_UP(r->end - base, sgsz);
+		for (segno = start / sgsz; segno < end / sgsz; segno++) {
+			if (pe_bitmap)
+				set_bit(segno, pe_bitmap);
+			else
+				pnv_ioda_reserve_pe(phb, segno);
 		}
 	}
 }
 
+static void pnv_ioda2_reserve_m64_pe(struct pci_bus *bus,
+				     unsigned long *pe_bitmap,
+				     bool all)
+{
+	struct pci_dev *pdev;
+
+	list_for_each_entry(pdev, &bus->devices, bus_list) {
+		pnv_ioda2_reserve_dev_m64_pe(pdev, pe_bitmap);
+
+		if (all && pdev->subordinate)
+			pnv_ioda2_reserve_m64_pe(pdev->subordinate,
+						 pe_bitmap, all);
+	}
+}
+
 static int pnv_ioda2_pick_m64_pe(struct pnv_phb *phb,
 				 struct pci_bus *bus, int all)
 {
@@ -1145,7 +1161,7 @@ static void pnv_pci_ioda_setup_PEs(void)
 
 		/* M64 layout might affect PE allocation */
 		if (phb->reserve_m64_pe)
-			phb->reserve_m64_pe(phb);
+			phb->reserve_m64_pe(hose->bus, NULL, true);
 
 		pnv_ioda_setup_PEs(hose->bus);
 	}
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 8ef2d28aded0..c6ddd18841b4 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -110,7 +110,8 @@ struct pnv_phb {
 	void (*fixup_phb)(struct pci_controller *hose);
 	u32 (*bdfn_to_pe)(struct pnv_phb *phb, struct pci_bus *bus, u32 devfn);
 	int (*init_m64)(struct pnv_phb *phb);
-	void (*reserve_m64_pe)(struct pnv_phb *phb);
+	void (*reserve_m64_pe)(struct pci_bus *bus,
+			       unsigned long *pe_bitmap, bool all);
 	int (*pick_m64_pe)(struct pnv_phb *phb, struct pci_bus *bus, int all);
 	int (*get_pe_state)(struct pnv_phb *phb, int pe_no);
 	void (*freeze_pe)(struct pnv_phb *phb, int pe_no);

From d1203852dfbbbd043bbd831761c117af752d1eda Mon Sep 17 00:00:00 2001
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
Date: Fri, 19 Jun 2015 12:26:18 +1000
Subject: [PATCH 010/140] powerpc/powernv: Boolean argument for
 pnv_ioda_setup_bus_PE()

The patch changes the type of last argument of pnv_ioda_setup_bus_PE()
and phb::pick_m64_pe() to boolean. No functional change.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/platforms/powernv/pci-ioda.c | 8 ++++----
 arch/powerpc/platforms/powernv/pci.h      | 2 +-
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 51a4dfe588d2..15d9dfcaf840 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -272,7 +272,7 @@ static void pnv_ioda2_reserve_m64_pe(struct pci_bus *bus,
 }
 
 static int pnv_ioda2_pick_m64_pe(struct pnv_phb *phb,
-				 struct pci_bus *bus, int all)
+				 struct pci_bus *bus, bool all)
 {
 	resource_size_t segsz = phb->ioda.m64_segsize;
 	struct pci_dev *pdev;
@@ -1064,7 +1064,7 @@ static void pnv_ioda_setup_same_PE(struct pci_bus *bus, struct pnv_ioda_pe *pe)
  * subordinate PCI devices and buses. The second type of PE is normally
  * orgiriated by PCIe-to-PCI bridge or PLX switch downstream ports.
  */
-static void pnv_ioda_setup_bus_PE(struct pci_bus *bus, int all)
+static void pnv_ioda_setup_bus_PE(struct pci_bus *bus, bool all)
 {
 	struct pci_controller *hose = pci_bus_to_host(bus);
 	struct pnv_phb *phb = hose->private_data;
@@ -1131,12 +1131,12 @@ static void pnv_ioda_setup_PEs(struct pci_bus *bus)
 {
 	struct pci_dev *dev;
 
-	pnv_ioda_setup_bus_PE(bus, 0);
+	pnv_ioda_setup_bus_PE(bus, false);
 
 	list_for_each_entry(dev, &bus->devices, bus_list) {
 		if (dev->subordinate) {
 			if (pci_pcie_type(dev) == PCI_EXP_TYPE_PCI_BRIDGE)
-				pnv_ioda_setup_bus_PE(dev->subordinate, 1);
+				pnv_ioda_setup_bus_PE(dev->subordinate, true);
 			else
 				pnv_ioda_setup_PEs(dev->subordinate);
 		}
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index c6ddd18841b4..5915cd244a5e 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -112,7 +112,7 @@ struct pnv_phb {
 	int (*init_m64)(struct pnv_phb *phb);
 	void (*reserve_m64_pe)(struct pci_bus *bus,
 			       unsigned long *pe_bitmap, bool all);
-	int (*pick_m64_pe)(struct pnv_phb *phb, struct pci_bus *bus, int all);
+	int (*pick_m64_pe)(struct pnv_phb *phb, struct pci_bus *bus, bool all);
 	int (*get_pe_state)(struct pnv_phb *phb, int pe_no);
 	void (*freeze_pe)(struct pnv_phb *phb, int pe_no);
 	int (*unfreeze_pe)(struct pnv_phb *phb, int pe_no, int opt);

From 26ba248d52854b267a3d728f2281efa89259eae4 Mon Sep 17 00:00:00 2001
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
Date: Fri, 19 Jun 2015 12:26:19 +1000
Subject: [PATCH 011/140] powerpc/powernv: Pick M64 PEs based on BARs

On PHB3, PE might be reserved in advance to reflect the M64 segments
consumed by the PE according to M64 BARs (exclude VF BARs) of the PCI
devices included in the PE. The PE is picked based on M64 BARs instead
of the bridge's M64 windows, which might include VF BARs. Otherwise,
wrong PE could be picked.

The patch calculates the used M64 segments and PE numbers according to
the M64 BARs, excluding VF BARs, of PCI devices in one particular PE,
instead of the bridge's M64 windows. Then the right PE number is picked.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/platforms/powernv/pci-ioda.c | 59 +++--------------------
 arch/powerpc/platforms/powernv/pci.h      |  2 +-
 2 files changed, 8 insertions(+), 53 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 15d9dfcaf840..70641617ff20 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -271,35 +271,18 @@ static void pnv_ioda2_reserve_m64_pe(struct pci_bus *bus,
 	}
 }
 
-static int pnv_ioda2_pick_m64_pe(struct pnv_phb *phb,
-				 struct pci_bus *bus, bool all)
+static int pnv_ioda2_pick_m64_pe(struct pci_bus *bus, bool all)
 {
-	resource_size_t segsz = phb->ioda.m64_segsize;
-	struct pci_dev *pdev;
-	struct resource *r;
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	struct pnv_phb *phb = hose->private_data;
 	struct pnv_ioda_pe *master_pe, *pe;
 	unsigned long size, *pe_alloc;
-	bool found;
-	int start, i, j;
+	int i;
 
 	/* Root bus shouldn't use M64 */
 	if (pci_is_root_bus(bus))
 		return IODA_INVALID_PE;
 
-	/* We support only one M64 window on each bus */
-	found = false;
-	pci_bus_for_each_resource(bus, r, i) {
-		if (r && r->parent &&
-		    pnv_pci_is_mem_pref_64(r->flags)) {
-			found = true;
-			break;
-		}
-	}
-
-	/* No M64 window found ? */
-	if (!found)
-		return IODA_INVALID_PE;
-
 	/* Allocate bitmap */
 	size = _ALIGN_UP(phb->ioda.total_pe / 8, sizeof(unsigned long));
 	pe_alloc = kzalloc(size, GFP_KERNEL);
@@ -309,35 +292,8 @@ static int pnv_ioda2_pick_m64_pe(struct pnv_phb *phb,
 		return IODA_INVALID_PE;
 	}
 
-	/*
-	 * Figure out reserved PE numbers by the PE
-	 * the its child PEs.
-	 */
-	start = (r->start - phb->ioda.m64_base) / segsz;
-	for (i = 0; i < resource_size(r) / segsz; i++)
-		set_bit(start + i, pe_alloc);
-
-	if (all)
-		goto done;
-
-	/*
-	 * If the PE doesn't cover all subordinate buses,
-	 * we need subtract from reserved PEs for children.
-	 */
-	list_for_each_entry(pdev, &bus->devices, bus_list) {
-		if (!pdev->subordinate)
-			continue;
-
-		pci_bus_for_each_resource(pdev->subordinate, r, i) {
-			if (!r || !r->parent ||
-			    !pnv_pci_is_mem_pref_64(r->flags))
-				continue;
-
-			start = (r->start - phb->ioda.m64_base) / segsz;
-			for (j = 0; j < resource_size(r) / segsz ; j++)
-				clear_bit(start + j, pe_alloc);
-                }
-        }
+	/* Figure out reserved PE numbers by the PE */
+	pnv_ioda2_reserve_m64_pe(bus, pe_alloc, all);
 
 	/*
 	 * the current bus might not own M64 window and that's all
@@ -353,7 +309,6 @@ static int pnv_ioda2_pick_m64_pe(struct pnv_phb *phb,
 	 * Figure out the master PE and put all slave PEs to master
 	 * PE's list to form compound PE.
 	 */
-done:
 	master_pe = NULL;
 	i = -1;
 	while ((i = find_next_bit(pe_alloc, phb->ioda.total_pe, i + 1)) <
@@ -1073,7 +1028,7 @@ static void pnv_ioda_setup_bus_PE(struct pci_bus *bus, bool all)
 
 	/* Check if PE is determined by M64 */
 	if (phb->pick_m64_pe)
-		pe_num = phb->pick_m64_pe(phb, bus, all);
+		pe_num = phb->pick_m64_pe(bus, all);
 
 	/* The PE number isn't pinned by M64 */
 	if (pe_num == IODA_INVALID_PE)
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 5915cd244a5e..e891ff48d7e6 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -112,7 +112,7 @@ struct pnv_phb {
 	int (*init_m64)(struct pnv_phb *phb);
 	void (*reserve_m64_pe)(struct pci_bus *bus,
 			       unsigned long *pe_bitmap, bool all);
-	int (*pick_m64_pe)(struct pnv_phb *phb, struct pci_bus *bus, bool all);
+	int (*pick_m64_pe)(struct pci_bus *bus, bool all);
 	int (*get_pe_state)(struct pnv_phb *phb, int pe_no);
 	void (*freeze_pe)(struct pnv_phb *phb, int pe_no);
 	int (*unfreeze_pe)(struct pnv_phb *phb, int pe_no, int opt);

From 283e2d8a594bc902d0c830bb324c15d5be755900 Mon Sep 17 00:00:00 2001
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
Date: Mon, 22 Jun 2015 13:45:47 +1000
Subject: [PATCH 012/140] powerpc/powernv: Include VF PE in PELTV of PF PE

The PELTV of PF PE should include VF PE, which is missed by current
code, so that the VF PE is frozen automatically when freezing PF PE.
The patch fixes the PELTV of PF PE to include VF PE.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/platforms/powernv/pci-ioda.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 70641617ff20..e1ea449e4811 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -622,7 +622,7 @@ static int pnv_ioda_set_peltv(struct pnv_phb *phb,
 		pdev = pe->pdev->bus->self;
 #ifdef CONFIG_PCI_IOV
 	else if (pe->flags & PNV_IODA_PE_VF)
-		pdev = pe->parent_dev->bus->self;
+		pdev = pe->parent_dev;
 #endif /* CONFIG_PCI_IOV */
 	while (pdev) {
 		struct pci_dn *pdn = pci_get_pdn(pdev);

From f951e51003860705fc9fc663fbce90f8263a6804 Mon Sep 17 00:00:00 2001
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
Date: Tue, 23 Jun 2015 17:01:13 +1000
Subject: [PATCH 013/140] powerpc/powernv: Unfreeze VF PE on releasing it

When releasing PE for SRIOV VF, the PE is forced to be frozen
wrongly. When the same PE is picked for another VF, it won't
work anyhow. The patch fixes the issue by unfreezing, not
freezing the VF PE when releasing it.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/platforms/powernv/pci-ioda.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index e1ea449e4811..fdafbaccafbe 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -701,7 +701,7 @@ static int pnv_ioda_deconfigure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
 		parent = parent->bus->self;
 	}
 
-	opal_pci_eeh_freeze_set(phb->opal_id, pe->pe_number,
+	opal_pci_eeh_freeze_clear(phb->opal_id, pe->pe_number,
 				  OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
 
 	/* Disassociate PE in PELT */

From 3b476aadbc1409fef6be85f601117f2c6a331faa Mon Sep 17 00:00:00 2001
From: Vipin K Parashar <vipin@linux.vnet.ibm.com>
Date: Wed, 8 Jul 2015 16:36:01 +0530
Subject: [PATCH 014/140] powerpc/powernv: Add poweroff (EPOW, DPO) events
 support for PowerNV platform

This patch adds support for OPAL EPOW (Environmental and Power Warnings)
and DPO (Delayed Power Off) events for the PowerNV platform. These events
are generated on FSP (Flexible Service Processor) based systems. EPOW
events are generated due to various critical system conditions that
require system shutdown. A few examples of these conditions are high
ambient temperature or system running on UPS power with low UPS battery.
DPO event is generated in response to admin initiated system shutdown
request. Upon receipt of EPOW and DPO events the host kernel invokes
orderly_poweroff() for performing graceful system shutdown.

Signed-off-by: Vipin K Parashar <vipin@linux.vnet.ibm.com>
Acked-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/opal-api.h           |  40 +++++
 arch/powerpc/include/asm/opal.h               |   3 +-
 arch/powerpc/platforms/powernv/opal-power.c   | 149 +++++++++++++++---
 .../powerpc/platforms/powernv/opal-wrappers.S |   1 +
 4 files changed, 174 insertions(+), 19 deletions(-)

diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index e9e4c52f3685..442995bacb33 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -756,6 +756,46 @@ struct opal_i2c_request {
 	__be64 buffer_ra;		/* Buffer real address */
 };
 
+/*
+ * EPOW status sharing (OPAL and the host)
+ *
+ * The host will pass on OPAL, a buffer of length OPAL_SYSEPOW_MAX
+ * with individual elements being 16 bits wide to fetch the system
+ * wide EPOW status. Each element in the buffer will contain the
+ * EPOW status in it's bit representation for a particular EPOW sub
+ * class as defiend here. So multiple detailed EPOW status bits
+ * specific for any sub class can be represented in a single buffer
+ * element as it's bit representation.
+ */
+
+/* System EPOW type */
+enum OpalSysEpow {
+	OPAL_SYSEPOW_POWER	= 0,	/* Power EPOW */
+	OPAL_SYSEPOW_TEMP	= 1,	/* Temperature EPOW */
+	OPAL_SYSEPOW_COOLING	= 2,	/* Cooling EPOW */
+	OPAL_SYSEPOW_MAX	= 3,	/* Max EPOW categories */
+};
+
+/* Power EPOW */
+enum OpalSysPower {
+	OPAL_SYSPOWER_UPS	= 0x0001, /* System on UPS power */
+	OPAL_SYSPOWER_CHNG	= 0x0002, /* System power config change */
+	OPAL_SYSPOWER_FAIL	= 0x0004, /* System impending power failure */
+	OPAL_SYSPOWER_INCL	= 0x0008, /* System incomplete power */
+};
+
+/* Temperature EPOW */
+enum OpalSysTemp {
+	OPAL_SYSTEMP_AMB	= 0x0001, /* System over ambient temperature */
+	OPAL_SYSTEMP_INT	= 0x0002, /* System over internal temperature */
+	OPAL_SYSTEMP_HMD	= 0x0004, /* System over ambient humidity */
+};
+
+/* Cooling EPOW */
+enum OpalSysCooling {
+	OPAL_SYSCOOL_INSF	= 0x0001, /* System insufficient cooling */
+};
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* __OPAL_API_H */
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 958e941c0cda..a091c2701d94 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -141,7 +141,8 @@ int64_t opal_pci_fence_phb(uint64_t phb_id);
 int64_t opal_pci_reinit(uint64_t phb_id, uint64_t reinit_scope, uint64_t data);
 int64_t opal_pci_mask_pe_error(uint64_t phb_id, uint16_t pe_number, uint8_t error_type, uint8_t mask_action);
 int64_t opal_set_slot_led_status(uint64_t phb_id, uint64_t slot_id, uint8_t led_type, uint8_t led_action);
-int64_t opal_get_epow_status(__be64 *status);
+int64_t opal_get_epow_status(__be16 *epow_status, __be16 *num_epow_classes);
+int64_t opal_get_dpo_status(__be64 *dpo_timeout);
 int64_t opal_set_system_attention_led(uint8_t led_action);
 int64_t opal_pci_next_error(uint64_t phb_id, __be64 *first_frozen_pe,
 			    __be16 *pci_error_type, __be16 *severity);
diff --git a/arch/powerpc/platforms/powernv/opal-power.c b/arch/powerpc/platforms/powernv/opal-power.c
index ac46c2c24f99..58dc3308237f 100644
--- a/arch/powerpc/platforms/powernv/opal-power.c
+++ b/arch/powerpc/platforms/powernv/opal-power.c
@@ -9,9 +9,12 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+#define pr_fmt(fmt)	"opal-power: "	fmt
+
 #include <linux/kernel.h>
 #include <linux/reboot.h>
 #include <linux/notifier.h>
+#include <linux/of.h>
 
 #include <asm/opal.h>
 #include <asm/machdep.h>
@@ -19,30 +22,116 @@
 #define SOFT_OFF 0x00
 #define SOFT_REBOOT 0x01
 
-static int opal_power_control_event(struct notifier_block *nb,
-				    unsigned long msg_type, void *msg)
+/* Detect EPOW event */
+static bool detect_epow(void)
+{
+	u16 epow;
+	int i, rc;
+	__be16 epow_classes;
+	__be16 opal_epow_status[OPAL_SYSEPOW_MAX] = {0};
+
+	/*
+	* Check for EPOW event. Kernel sends supported EPOW classes info
+	* to OPAL. OPAL returns EPOW info along with classes present.
+	*/
+	epow_classes = cpu_to_be16(OPAL_SYSEPOW_MAX);
+	rc = opal_get_epow_status(opal_epow_status, &epow_classes);
+	if (rc != OPAL_SUCCESS) {
+		pr_err("Failed to get EPOW event information\n");
+		return false;
+	}
+
+	/* Look for EPOW events present */
+	for (i = 0; i < be16_to_cpu(epow_classes); i++) {
+		epow = be16_to_cpu(opal_epow_status[i]);
+
+		/* Filter events which do not need shutdown. */
+		if (i == OPAL_SYSEPOW_POWER)
+			epow &= ~(OPAL_SYSPOWER_CHNG | OPAL_SYSPOWER_FAIL |
+					OPAL_SYSPOWER_INCL);
+		if (epow)
+			return true;
+	}
+
+	return false;
+}
+
+/* Check for existing EPOW, DPO events */
+static bool poweroff_pending(void)
+{
+	int rc;
+	__be64 opal_dpo_timeout;
+
+	/* Check for DPO event */
+	rc = opal_get_dpo_status(&opal_dpo_timeout);
+	if (rc == OPAL_SUCCESS) {
+		pr_info("Existing DPO event detected.\n");
+		return true;
+	}
+
+	/* Check for EPOW event */
+	if (detect_epow()) {
+		pr_info("Existing EPOW event detected.\n");
+		return true;
+	}
+
+	return false;
+}
+
+/* OPAL power-control events notifier */
+static int opal_power_control_event(struct notifier_block *nb,
+					unsigned long msg_type, void *msg)
 {
-	struct opal_msg *power_msg = msg;
 	uint64_t type;
 
-	type = be64_to_cpu(power_msg->params[0]);
-
-	switch (type) {
-	case SOFT_REBOOT:
-		pr_info("OPAL: reboot requested\n");
-		orderly_reboot();
+	switch (msg_type) {
+	case OPAL_MSG_EPOW:
+		if (detect_epow()) {
+			pr_info("EPOW msg received. Powering off system\n");
+			orderly_poweroff(true);
+		}
 		break;
-	case SOFT_OFF:
-		pr_info("OPAL: poweroff requested\n");
+	case OPAL_MSG_DPO:
+		pr_info("DPO msg received. Powering off system\n");
 		orderly_poweroff(true);
 		break;
+	case OPAL_MSG_SHUTDOWN:
+		type = be64_to_cpu(((struct opal_msg *)msg)->params[0]);
+		switch (type) {
+		case SOFT_REBOOT:
+			pr_info("Reboot requested\n");
+			orderly_reboot();
+			break;
+		case SOFT_OFF:
+			pr_info("Poweroff requested\n");
+			orderly_poweroff(true);
+			break;
+		default:
+			pr_err("Unknown power-control type %llu\n", type);
+		}
+		break;
 	default:
-		pr_err("OPAL: power control type unexpected %016llx\n", type);
+		pr_err("Unknown OPAL message type %lu\n", msg_type);
 	}
 
 	return 0;
 }
 
+/* OPAL EPOW event notifier block */
+static struct notifier_block opal_epow_nb = {
+	.notifier_call	= opal_power_control_event,
+	.next		= NULL,
+	.priority	= 0,
+};
+
+/* OPAL DPO event notifier block */
+static struct notifier_block opal_dpo_nb = {
+	.notifier_call	= opal_power_control_event,
+	.next		= NULL,
+	.priority	= 0,
+};
+
+/* OPAL power-control event notifier block */
 static struct notifier_block opal_power_control_nb = {
 	.notifier_call	= opal_power_control_event,
 	.next		= NULL,
@@ -51,16 +140,40 @@ static struct notifier_block opal_power_control_nb = {
 
 static int __init opal_power_control_init(void)
 {
-	int ret;
+	int ret, supported = 0;
+	struct device_node *np;
 
+	/* Register OPAL power-control events notifier */
 	ret = opal_message_notifier_register(OPAL_MSG_SHUTDOWN,
-					     &opal_power_control_nb);
-	if (ret) {
-		pr_err("%s: Can't register OPAL event notifier (%d)\n",
-				__func__, ret);
-		return ret;
+						&opal_power_control_nb);
+	if (ret)
+		pr_err("Failed to register SHUTDOWN notifier, ret = %d\n", ret);
+
+	/* Determine OPAL EPOW, DPO support */
+	np = of_find_node_by_path("/ibm,opal/epow");
+	if (np) {
+		supported = of_device_is_compatible(np, "ibm,opal-v3-epow");
+		of_node_put(np);
 	}
 
+	if (!supported)
+		return 0;
+	pr_info("OPAL EPOW, DPO support detected.\n");
+
+	/* Register EPOW event notifier */
+	ret = opal_message_notifier_register(OPAL_MSG_EPOW, &opal_epow_nb);
+	if (ret)
+		pr_err("Failed to register EPOW notifier, ret = %d\n", ret);
+
+	/* Register DPO event notifier */
+	ret = opal_message_notifier_register(OPAL_MSG_DPO, &opal_dpo_nb);
+	if (ret)
+		pr_err("Failed to register DPO notifier, ret = %d\n", ret);
+
+	/* Check for any pending EPOW or DPO events. */
+	if (poweroff_pending())
+		orderly_poweroff(true);
+
 	return 0;
 }
 machine_subsys_initcall(powernv, opal_power_control_init);
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index d6a7b8252e4d..88e433357371 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -249,6 +249,7 @@ OPAL_CALL(opal_pci_reinit,			OPAL_PCI_REINIT);
 OPAL_CALL(opal_pci_mask_pe_error,		OPAL_PCI_MASK_PE_ERROR);
 OPAL_CALL(opal_set_slot_led_status,		OPAL_SET_SLOT_LED_STATUS);
 OPAL_CALL(opal_get_epow_status,			OPAL_GET_EPOW_STATUS);
+OPAL_CALL(opal_get_dpo_status,			OPAL_GET_DPO_STATUS);
 OPAL_CALL(opal_set_system_attention_led,	OPAL_SET_SYSTEM_ATTENTION_LED);
 OPAL_CALL(opal_pci_next_error,			OPAL_PCI_NEXT_ERROR);
 OPAL_CALL(opal_pci_poll,			OPAL_PCI_POLL);

From b2a02ac65e40fb3900d176828a407b44bb33f9f4 Mon Sep 17 00:00:00 2001
From: Johannes Thumshirn <jthumshirn@suse.de>
Date: Wed, 8 Jul 2015 17:14:36 +0200
Subject: [PATCH 015/140] cxl: Destroy cxl_adapter_idr on module_exit

Destroy cxl_adapter_idr on module exit, reclaiming the allocated memory.

This was detected by the following semantic patch (written by Luis Rodriguez
<mcgrof@suse.com>)
<SmPL>
@ defines_module_init @
declarer name module_init, module_exit;
declarer name DEFINE_IDR;
identifier init;
@@

module_init(init);

@ defines_module_exit @
identifier exit;
@@

module_exit(exit);

@ declares_idr depends on defines_module_init && defines_module_exit @
identifier idr;
@@

DEFINE_IDR(idr);

@ on_exit_calls_destroy depends on declares_idr && defines_module_exit @
identifier declares_idr.idr, defines_module_exit.exit;
@@

exit(void)
{
 ...
 idr_destroy(&idr);
 ...
}

@ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @
identifier declares_idr.idr, defines_module_exit.exit;
@@

exit(void)
{
 ...
 +idr_destroy(&idr);
}
</SmPL>

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/misc/cxl/main.c b/drivers/misc/cxl/main.c
index 4a164ab8b35a..9fde75ed4fac 100644
--- a/drivers/misc/cxl/main.c
+++ b/drivers/misc/cxl/main.c
@@ -222,6 +222,7 @@ static void exit_cxl(void)
 	cxl_debugfs_exit();
 	cxl_file_exit();
 	unregister_cxl_calls(&cxl_calls);
+	idr_destroy(&cxl_adapter_idr);
 }
 
 module_init(init_cxl);

From bd664f892e3e2b01c79197cad3111d54b7aedf39 Mon Sep 17 00:00:00 2001
From: Johannes Thumshirn <jthumshirn@suse.de>
Date: Thu, 9 Jul 2015 09:39:42 +0200
Subject: [PATCH 016/140] cxl: Destroy afu->contexts_idr on release of an afu

Destroy afu->contexts_idr on release of an afu, reclaiming the allocated
memory.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/pci.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index eb05efb74eed..1d314f1f95fe 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -551,6 +551,7 @@ static void cxl_release_afu(struct device *dev)
 
 	pr_devel("cxl_release_afu\n");
 
+	idr_destroy(&afu->contexts_idr);
 	kfree(afu);
 }
 

From 829023df86d4ec39b110860cd5f106b7ac58f772 Mon Sep 17 00:00:00 2001
From: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Date: Mon, 6 Jul 2015 16:24:10 +0530
Subject: [PATCH 017/140] powerpc/tm: Drop tm_orig_msr from thread_struct

Currently tm_orig_msr is getting used during process context switch only.
Then there is ckpt_regs which saves the checkpointed userspace context
The MSR slot contained in ckpt_regs structure can be used during process
context switch instead of tm_orig_msr, thus allowing us to drop it from
thread_struct structure. This patch does that change.

Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/processor.h |  1 -
 arch/powerpc/kernel/process.c        | 14 +++++++-------
 2 files changed, 7 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 28ded5d9b579..5afea361beaa 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -264,7 +264,6 @@ struct thread_struct {
 	u64		tm_tfhar;	/* Transaction fail handler addr */
 	u64		tm_texasr;	/* Transaction exception & summary */
 	u64		tm_tfiar;	/* Transaction fail instr address reg */
-	unsigned long	tm_orig_msr;	/* Thread's MSR on ctx switch */
 	struct pt_regs	ckpt_regs;	/* Checkpointed registers */
 
 	unsigned long	tm_tar;
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 8005e18d1b40..99adcbad3690 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -86,7 +86,7 @@ void giveup_fpu_maybe_transactional(struct task_struct *tsk)
 	if (tsk == current && tsk->thread.regs &&
 	    MSR_TM_ACTIVE(tsk->thread.regs->msr) &&
 	    !test_thread_flag(TIF_RESTORE_TM)) {
-		tsk->thread.tm_orig_msr = tsk->thread.regs->msr;
+		tsk->thread.ckpt_regs.msr = tsk->thread.regs->msr;
 		set_thread_flag(TIF_RESTORE_TM);
 	}
 
@@ -104,7 +104,7 @@ void giveup_altivec_maybe_transactional(struct task_struct *tsk)
 	if (tsk == current && tsk->thread.regs &&
 	    MSR_TM_ACTIVE(tsk->thread.regs->msr) &&
 	    !test_thread_flag(TIF_RESTORE_TM)) {
-		tsk->thread.tm_orig_msr = tsk->thread.regs->msr;
+		tsk->thread.ckpt_regs.msr = tsk->thread.regs->msr;
 		set_thread_flag(TIF_RESTORE_TM);
 	}
 
@@ -543,7 +543,7 @@ static void tm_reclaim_thread(struct thread_struct *thr,
 	 * the thread will no longer be transactional.
 	 */
 	if (test_ti_thread_flag(ti, TIF_RESTORE_TM)) {
-		msr_diff = thr->tm_orig_msr & ~thr->regs->msr;
+		msr_diff = thr->ckpt_regs.msr & ~thr->regs->msr;
 		if (msr_diff & MSR_FP)
 			memcpy(&thr->transact_fp, &thr->fp_state,
 			       sizeof(struct thread_fp_state));
@@ -594,10 +594,10 @@ static inline void tm_reclaim_task(struct task_struct *tsk)
 	/* Stash the original thread MSR, as giveup_fpu et al will
 	 * modify it.  We hold onto it to see whether the task used
 	 * FP & vector regs.  If the TIF_RESTORE_TM flag is set,
-	 * tm_orig_msr is already set.
+	 * ckpt_regs.msr is already set.
 	 */
 	if (!test_ti_thread_flag(task_thread_info(tsk), TIF_RESTORE_TM))
-		thr->tm_orig_msr = thr->regs->msr;
+		thr->ckpt_regs.msr = thr->regs->msr;
 
 	TM_DEBUG("--- tm_reclaim on pid %d (NIP=%lx, "
 		 "ccr=%lx, msr=%lx, trap=%lx)\n",
@@ -666,7 +666,7 @@ static inline void tm_recheckpoint_new_task(struct task_struct *new)
 		tm_restore_sprs(&new->thread);
 		return;
 	}
-	msr = new->thread.tm_orig_msr;
+	msr = new->thread.ckpt_regs.msr;
 	/* Recheckpoint to restore original checkpointed register state. */
 	TM_DEBUG("*** tm_recheckpoint of pid %d "
 		 "(new->msr 0x%lx, new->origmsr 0x%lx)\n",
@@ -726,7 +726,7 @@ void restore_tm_state(struct pt_regs *regs)
 	if (!MSR_TM_ACTIVE(regs->msr))
 		return;
 
-	msr_diff = current->thread.tm_orig_msr & ~regs->msr;
+	msr_diff = current->thread.ckpt_regs.msr & ~regs->msr;
 	msr_diff &= MSR_FP | MSR_VEC | MSR_VSX;
 	if (msr_diff & MSR_FP) {
 		fp_enable();

From 4c576229ac371bc9d96f2b365ebcd296aa266cec Mon Sep 17 00:00:00 2001
From: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Date: Mon, 6 Jul 2015 15:55:33 +0530
Subject: [PATCH 018/140] powerpc/signal: Fix confusing header documentation in
 sigcontext.h

Commit ce48b2100785 "powerpc: Add VSX context save/restore, ptrace and
signal support" expanded the 'vmx_reserve' array element to contain 101
double words, but the comment block above was not updated.

Also reorder the constants in the array size declaration to reflect the
logic mentioned in the comment block above. This change helps in
explaining how the HW registers are represented in the array. But no
functional change.

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
[mpe: Reworded change log and added whitespace around +'s]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/uapi/asm/sigcontext.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/uapi/asm/sigcontext.h b/arch/powerpc/include/uapi/asm/sigcontext.h
index 9c1f24fd5d11..3ad0c7f001a9 100644
--- a/arch/powerpc/include/uapi/asm/sigcontext.h
+++ b/arch/powerpc/include/uapi/asm/sigcontext.h
@@ -28,7 +28,7 @@ struct sigcontext {
 /*
  * To maintain compatibility with current implementations the sigcontext is
  * extended by appending a pointer (v_regs) to a quadword type (elf_vrreg_t)
- * followed by an unstructured (vmx_reserve) field of 69 doublewords.  This
+ * followed by an unstructured (vmx_reserve) field of 101 doublewords. This
  * allows the array of vector registers to be quadword aligned independent of
  * the alignment of the containing sigcontext or ucontext. It is the
  * responsibility of the code setting the sigcontext to set this pointer to
@@ -80,7 +80,7 @@ struct sigcontext {
  * registers and vscr/vrsave.
  */
 	elf_vrreg_t	__user *v_regs;
-	long		vmx_reserve[ELF_NVRREG+ELF_NVRREG+32+1];
+	long		vmx_reserve[ELF_NVRREG + ELF_NVRREG + 1 + 32];
 #endif
 };
 

From 2476c09f391eddb546a73fef9f6ab86886a9f2b1 Mon Sep 17 00:00:00 2001
From: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Date: Mon, 20 Jul 2015 08:28:43 +0530
Subject: [PATCH 019/140] powerpc/signal: Add helper function to fetch quad
 word aligned pointer

This patch adds one helper function 'sigcontext_vmx_regs' which computes
quad word aligned pointer for 'vmx_reserve' array element in sigcontext
structure making the code more readable.

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
[mpe: Reword comment and fix build for CONFIG_ALTIVEC=n]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/signal_64.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index c7c24d2e2bdb..20756dfb9f34 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -73,6 +73,19 @@ static const char fmt32[] = KERN_INFO \
 static const char fmt64[] = KERN_INFO \
 	"%s[%d]: bad frame in %s: %016lx nip %016lx lr %016lx\n";
 
+/*
+ * This computes a quad word aligned pointer inside the vmx_reserve array
+ * element. For historical reasons sigcontext might not be quad word aligned,
+ * but the location we write the VMX regs to must be. See the comment in
+ * sigcontext for more detail.
+ */
+#ifdef CONFIG_ALTIVEC
+static elf_vrreg_t __user *sigcontext_vmx_regs(struct sigcontext __user *sc)
+{
+	return (elf_vrreg_t __user *) (((unsigned long)sc->vmx_reserve + 15) & ~0xful);
+}
+#endif
+
 /*
  * Set up the sigcontext for the signal frame.
  */
@@ -90,7 +103,7 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 	 * v_regs pointer or not
 	 */
 #ifdef CONFIG_ALTIVEC
-	elf_vrreg_t __user *v_regs = (elf_vrreg_t __user *)(((unsigned long)sc->vmx_reserve + 15) & ~0xful);
+	elf_vrreg_t __user *v_regs = sigcontext_vmx_regs(sc);
 #endif
 	unsigned long msr = regs->msr;
 	long err = 0;
@@ -181,10 +194,8 @@ static long setup_tm_sigcontexts(struct sigcontext __user *sc,
 	 * v_regs pointer or not.
 	 */
 #ifdef CONFIG_ALTIVEC
-	elf_vrreg_t __user *v_regs = (elf_vrreg_t __user *)
-		(((unsigned long)sc->vmx_reserve + 15) & ~0xful);
-	elf_vrreg_t __user *tm_v_regs = (elf_vrreg_t __user *)
-		(((unsigned long)tm_sc->vmx_reserve + 15) & ~0xful);
+	elf_vrreg_t __user *v_regs = sigcontext_vmx_regs(sc);
+	elf_vrreg_t __user *tm_v_regs = sigcontext_vmx_regs(tm_sc);
 #endif
 	unsigned long msr = regs->msr;
 	long err = 0;

From 0f36db77643b6fb573313d97fa076903de6a34d6 Mon Sep 17 00:00:00 2001
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
Date: Tue, 12 May 2015 17:05:22 +1000
Subject: [PATCH 020/140] powerpc/eeh: Fix wrong printed PE number

On LE kernel, the non-existing PE number in BE format derived from
skiboot firmware isn't converted to LE format properly as following
kernel log indicates:

   EEH: Clear non-existing PHB#4-PE#200000000000000

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/platforms/powernv/eeh-powernv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 5cf5e6ea213b..b357cdc3f472 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -1396,7 +1396,7 @@ static int pnv_eeh_next_error(struct eeh_pe **pe)
 				be64_to_cpu(frozen_pe_no), pe)) {
 				/* Try best to clear it */
 				pr_info("EEH: Clear non-existing PHB#%x-PE#%llx\n",
-					hose->global_number, frozen_pe_no);
+					hose->global_number, be64_to_cpu(frozen_pe_no));
 				pr_info("EEH: PHB location: %s\n",
 					eeh_pe_loc_get(phb_pe));
 				opal_pci_eeh_freeze_clear(phb->opal_id,

From 79cd95200035fb4b39b089dd01c13302eee6ee03 Mon Sep 17 00:00:00 2001
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
Date: Tue, 12 May 2015 17:05:32 +1000
Subject: [PATCH 021/140] powerpc/eeh: Dump PHB diag-data for non-existing PE

When detecting EEH error on non-existing PE, including the reserved
one, the PE is simply unfrozen without dumping the PHB diag-data,
which is useful for locating the root cause of the EEH error. The
patch dumps the PHB diag-data when non-existing PE reports error.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/platforms/powernv/eeh-powernv.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index b357cdc3f472..0fe2b0cb587a 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -1394,11 +1394,19 @@ static int pnv_eeh_next_error(struct eeh_pe **pe)
 			 */
 			if (pnv_eeh_get_pe(hose,
 				be64_to_cpu(frozen_pe_no), pe)) {
-				/* Try best to clear it */
 				pr_info("EEH: Clear non-existing PHB#%x-PE#%llx\n",
 					hose->global_number, be64_to_cpu(frozen_pe_no));
 				pr_info("EEH: PHB location: %s\n",
 					eeh_pe_loc_get(phb_pe));
+
+				/* Dump PHB diag-data */
+				rc = opal_pci_get_phb_diag_data2(phb->opal_id,
+					phb->diag.blob, PNV_PCI_DIAG_BUF_SIZE);
+				if (rc == OPAL_SUCCESS)
+					pnv_pci_dump_phb_diag_data(hose,
+							phb->diag.blob);
+
+				/* Try best to clear it */
 				opal_pci_eeh_freeze_clear(phb->opal_id,
 					frozen_pe_no,
 					OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);

From 9ef03193a93553885b43731c47d3b6ae90e677c4 Mon Sep 17 00:00:00 2001
From: Thomas Huth <thuth@redhat.com>
Date: Wed, 22 Jul 2015 18:56:47 +0200
Subject: [PATCH 022/140] powerpc/rtas: Replace magic values with defines

rtas.h already has some nice #defines for RTAS return status
codes - let's use them instead of hard-coded "magic" values!

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/rtas.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 7a488c108410..10fb4024a0ce 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -478,8 +478,9 @@ unsigned int rtas_busy_delay_time(int status)
 
 	if (status == RTAS_BUSY) {
 		ms = 1;
-	} else if (status >= 9900 && status <= 9905) {
-		order = status - 9900;
+	} else if (status >= RTAS_EXTENDED_DELAY_MIN &&
+		   status <= RTAS_EXTENDED_DELAY_MAX) {
+		order = status - RTAS_EXTENDED_DELAY_MIN;
 		for (ms = 1; order > 0; order--)
 			ms *= 10;
 	}
@@ -641,7 +642,8 @@ int rtas_set_indicator_fast(int indicator, int index, int new_value)
 
 	rc = rtas_call(token, 3, 1, NULL, indicator, index, new_value);
 
-	WARN_ON(rc == -2 || (rc >= 9900 && rc <= 9905));
+	WARN_ON(rc == RTAS_BUSY || (rc >= RTAS_EXTENDED_DELAY_MIN &&
+				    rc <= RTAS_EXTENDED_DELAY_MAX));
 
 	if (rc < 0)
 		return rtas_error_rc(rc);

From 1c2cb594441d02815d304cccec9742ff5c707495 Mon Sep 17 00:00:00 2001
From: Thomas Huth <thuth@redhat.com>
Date: Fri, 17 Jul 2015 12:46:58 +0200
Subject: [PATCH 023/140] powerpc/rtas: Introduce rtas_get_sensor_fast() for
 IRQ handlers

The EPOW interrupt handler uses rtas_get_sensor(), which in turn
uses rtas_busy_delay() to wait for RTAS becoming ready in case it
is necessary. But rtas_busy_delay() is annotated with might_sleep()
and thus may not be used by interrupts handlers like the EPOW handler!
This leads to the following BUG when CONFIG_DEBUG_ATOMIC_SLEEP is
enabled:

 BUG: sleeping function called from invalid context at arch/powerpc/kernel/rtas.c:496
 in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/1
 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.2.0-rc2-thuth #6
 Call Trace:
 [c00000007ffe7b90] [c000000000807670] dump_stack+0xa0/0xdc (unreliable)
 [c00000007ffe7bc0] [c0000000000e1f14] ___might_sleep+0x134/0x180
 [c00000007ffe7c20] [c00000000002aec0] rtas_busy_delay+0x30/0xd0
 [c00000007ffe7c50] [c00000000002bde4] rtas_get_sensor+0x74/0xe0
 [c00000007ffe7ce0] [c000000000083264] ras_epow_interrupt+0x44/0x450
 [c00000007ffe7d90] [c000000000120260] handle_irq_event_percpu+0xa0/0x300
 [c00000007ffe7e70] [c000000000120524] handle_irq_event+0x64/0xc0
 [c00000007ffe7eb0] [c000000000124dbc] handle_fasteoi_irq+0xec/0x260
 [c00000007ffe7ef0] [c00000000011f4f0] generic_handle_irq+0x50/0x80
 [c00000007ffe7f20] [c000000000010f3c] __do_irq+0x8c/0x200
 [c00000007ffe7f90] [c0000000000236cc] call_do_irq+0x14/0x24
 [c00000007e6f39e0] [c000000000011144] do_IRQ+0x94/0x110
 [c00000007e6f3a30] [c000000000002594] hardware_interrupt_common+0x114/0x180

Fix this issue by introducing a new rtas_get_sensor_fast() function
that does not use rtas_busy_delay() - and thus can only be used for
sensors that do not cause a BUSY condition - known as "fast" sensors.

The EPOW sensor is defined to be "fast" in sPAPR - mpe.

Fixes: 587f83e8dd50 ("powerpc/pseries: Use rtas_get_sensor in RAS code")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/rtas.h      |  1 +
 arch/powerpc/kernel/rtas.c           | 17 +++++++++++++++++
 arch/powerpc/platforms/pseries/ras.c |  3 ++-
 3 files changed, 20 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index 7a4ede16b283..b77ef369c0f0 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -343,6 +343,7 @@ extern void rtas_power_off(void);
 extern void rtas_halt(void);
 extern void rtas_os_term(char *str);
 extern int rtas_get_sensor(int sensor, int index, int *state);
+extern int rtas_get_sensor_fast(int sensor, int index, int *state);
 extern int rtas_get_power_level(int powerdomain, int *level);
 extern int rtas_set_power_level(int powerdomain, int level, int *setlevel);
 extern bool rtas_indicator_present(int token, int *maxindex);
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 10fb4024a0ce..84bf934cf748 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -585,6 +585,23 @@ int rtas_get_sensor(int sensor, int index, int *state)
 }
 EXPORT_SYMBOL(rtas_get_sensor);
 
+int rtas_get_sensor_fast(int sensor, int index, int *state)
+{
+	int token = rtas_token("get-sensor-state");
+	int rc;
+
+	if (token == RTAS_UNKNOWN_SERVICE)
+		return -ENOENT;
+
+	rc = rtas_call(token, 2, 2, state, sensor, index);
+	WARN_ON(rc == RTAS_BUSY || (rc >= RTAS_EXTENDED_DELAY_MIN &&
+				    rc <= RTAS_EXTENDED_DELAY_MAX));
+
+	if (rc < 0)
+		return rtas_error_rc(rc);
+	return rc;
+}
+
 bool rtas_indicator_present(int token, int *maxindex)
 {
 	int proplen, count, i;
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index 02e4a1745516..3b6647e574b6 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -189,7 +189,8 @@ static irqreturn_t ras_epow_interrupt(int irq, void *dev_id)
 	int state;
 	int critical;
 
-	status = rtas_get_sensor(EPOW_SENSOR_TOKEN, EPOW_SENSOR_INDEX, &state);
+	status = rtas_get_sensor_fast(EPOW_SENSOR_TOKEN, EPOW_SENSOR_INDEX,
+				      &state);
 
 	if (state > 3)
 		critical = 1;		/* Time Critical */

From 01c9348c7620ec650aaeb3ce339f614709b2fb5a Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Fri, 17 Jul 2015 20:11:43 +1000
Subject: [PATCH 024/140] powerpc: Use hardware RNG for arch_get_random_seed_*
 not arch_get_random_*

The hardware RNG on POWER8 and POWER7+ can be relatively slow, since
it can only supply one 64-bit value per microsecond.  Currently we
read it in arch_get_random_long(), but that slows down reading from
/dev/urandom since the code in random.c calls arch_get_random_long()
for every longword read from /dev/urandom.

Since the hardware RNG supplies high-quality entropy on every read, it
matches the semantics of arch_get_random_seed_long() better than those
of arch_get_random_long().  Therefore this commit makes the code use
the POWER8/7+ hardware RNG only for arch_get_random_seed_{long,int}
and not for arch_get_random_{long,int}.

This won't affect any other PowerPC-based platforms because none of
them currently support a hardware RNG.  To make it clear that the
ppc_md function pointer is used for arch_get_random_seed_*, we rename
it from get_random_long to get_random_seed.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/archrandom.h | 28 +++++++++++++--------------
 arch/powerpc/include/asm/machdep.h    |  2 +-
 arch/powerpc/platforms/powernv/rng.c  |  2 +-
 arch/powerpc/platforms/pseries/rng.c  |  2 +-
 4 files changed, 17 insertions(+), 17 deletions(-)

diff --git a/arch/powerpc/include/asm/archrandom.h b/arch/powerpc/include/asm/archrandom.h
index 0cc6eedc4780..85e88f7a59c0 100644
--- a/arch/powerpc/include/asm/archrandom.h
+++ b/arch/powerpc/include/asm/archrandom.h
@@ -7,13 +7,22 @@
 
 static inline int arch_get_random_long(unsigned long *v)
 {
-	if (ppc_md.get_random_long)
-		return ppc_md.get_random_long(v);
-
 	return 0;
 }
 
 static inline int arch_get_random_int(unsigned int *v)
+{
+	return 0;
+}
+
+static inline int arch_get_random_seed_long(unsigned long *v)
+{
+	if (ppc_md.get_random_seed)
+		return ppc_md.get_random_seed(v);
+
+	return 0;
+}
+static inline int arch_get_random_seed_int(unsigned int *v)
 {
 	unsigned long val;
 	int rc;
@@ -27,22 +36,13 @@ static inline int arch_get_random_int(unsigned int *v)
 
 static inline int arch_has_random(void)
 {
-	return !!ppc_md.get_random_long;
+	return 0;
 }
 
-static inline int arch_get_random_seed_long(unsigned long *v)
-{
-	return 0;
-}
-static inline int arch_get_random_seed_int(unsigned int *v)
-{
-	return 0;
-}
 static inline int arch_has_random_seed(void)
 {
-	return 0;
+	return !!ppc_md.get_random_seed;
 }
-
 #endif /* CONFIG_ARCH_RANDOM */
 
 #ifdef CONFIG_PPC_POWERNV
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 952579f5e79a..cab6753f1be5 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -249,7 +249,7 @@ struct machdep_calls {
 #endif
 
 #ifdef CONFIG_ARCH_RANDOM
-	int (*get_random_long)(unsigned long *v);
+	int (*get_random_seed)(unsigned long *v);
 #endif
 };
 
diff --git a/arch/powerpc/platforms/powernv/rng.c b/arch/powerpc/platforms/powernv/rng.c
index 6eb808ff637e..5dcbdea1afac 100644
--- a/arch/powerpc/platforms/powernv/rng.c
+++ b/arch/powerpc/platforms/powernv/rng.c
@@ -128,7 +128,7 @@ static __init int rng_create(struct device_node *dn)
 
 	pr_info_once("Registering arch random hook.\n");
 
-	ppc_md.get_random_long = powernv_get_random_long;
+	ppc_md.get_random_seed = powernv_get_random_long;
 
 	return 0;
 }
diff --git a/arch/powerpc/platforms/pseries/rng.c b/arch/powerpc/platforms/pseries/rng.c
index e09608770909..31ca557af60b 100644
--- a/arch/powerpc/platforms/pseries/rng.c
+++ b/arch/powerpc/platforms/pseries/rng.c
@@ -38,7 +38,7 @@ static __init int rng_init(void)
 
 	pr_info("Registering arch random hook.\n");
 
-	ppc_md.get_random_long = pseries_get_random_long;
+	ppc_md.get_random_seed = pseries_get_random_long;
 
 	return 0;
 }

From 40386217cd7bc38908d65852c0af5cffe04bf7f4 Mon Sep 17 00:00:00 2001
From: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Date: Tue, 14 Jul 2015 20:01:48 -0700
Subject: [PATCH 025/140] powerpc/perf/hv-24x7: Whitespace - fix parameter
 alignment

Fix parameter alignment to be consistent with coding style.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/perf/hv-24x7.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/powerpc/perf/hv-24x7.c b/arch/powerpc/perf/hv-24x7.c
index df956295c2a7..9d73c693e792 100644
--- a/arch/powerpc/perf/hv-24x7.c
+++ b/arch/powerpc/perf/hv-24x7.c
@@ -416,7 +416,7 @@ static struct attribute *event_to_attr(unsigned ix,
 }
 
 static struct attribute *event_to_desc_attr(struct hv_24x7_event_data *event,
-				int nonce)
+					    int nonce)
 {
 	int nl, dl;
 	char *name = event_name(event, &nl);
@@ -444,7 +444,7 @@ event_to_long_desc_attr(struct hv_24x7_event_data *event, int nonce)
 }
 
 static ssize_t event_data_to_attrs(unsigned ix, struct attribute **attrs,
-		struct hv_24x7_event_data *event, int nonce)
+				   struct hv_24x7_event_data *event, int nonce)
 {
 	unsigned i;
 
@@ -512,7 +512,7 @@ static int memord(const void *d1, size_t s1, const void *d2, size_t s2)
 }
 
 static int ev_uniq_ord(const void *v1, size_t s1, unsigned d1, const void *v2,
-					size_t s2, unsigned d2)
+		       size_t s2, unsigned d2)
 {
 	int r = memord(v1, s1, v2, s2);
 
@@ -526,7 +526,7 @@ static int ev_uniq_ord(const void *v1, size_t s1, unsigned d1, const void *v2,
 }
 
 static int event_uniq_add(struct rb_root *root, const char *name, int nl,
-				unsigned domain)
+			  unsigned domain)
 {
 	struct rb_node **new = &(root->rb_node), *parent = NULL;
 	struct event_uniq *data;
@@ -650,8 +650,8 @@ static ssize_t catalog_event_len_validate(struct hv_24x7_event_data *event,
 #define MAX_4K (SIZE_MAX / 4096)
 
 static int create_events_from_catalog(struct attribute ***events_,
-		struct attribute ***event_descs_,
-		struct attribute ***event_long_descs_)
+				      struct attribute ***event_descs_,
+				      struct attribute ***event_long_descs_)
 {
 	unsigned long hret;
 	size_t catalog_len, catalog_page_len, event_entry_count,
@@ -1008,8 +1008,8 @@ static const struct attribute_group *attr_groups[] = {
 };
 
 static void log_24x7_hcall(struct hv_24x7_request_buffer *request_buffer,
-			struct hv_24x7_data_result_buffer *result_buffer,
-			unsigned long ret)
+			   struct hv_24x7_data_result_buffer *result_buffer,
+			   unsigned long ret)
 {
 	struct hv_24x7_request *req;
 
@@ -1026,7 +1026,7 @@ static void log_24x7_hcall(struct hv_24x7_request_buffer *request_buffer,
  * Start the process for a new H_GET_24x7_DATA hcall.
  */
 static void init_24x7_request(struct hv_24x7_request_buffer *request_buffer,
-			struct hv_24x7_data_result_buffer *result_buffer)
+			      struct hv_24x7_data_result_buffer *result_buffer)
 {
 
 	memset(request_buffer, 0, 4096);
@@ -1041,7 +1041,7 @@ static void init_24x7_request(struct hv_24x7_request_buffer *request_buffer,
  * by 'init_24x7_request()' and 'add_event_to_24x7_request()'.
  */
 static int make_24x7_request(struct hv_24x7_request_buffer *request_buffer,
-			struct hv_24x7_data_result_buffer *result_buffer)
+			     struct hv_24x7_data_result_buffer *result_buffer)
 {
 	unsigned long ret;
 

From 465345ca387ed491c467689ec2ac1ecbe1d84c3d Mon Sep 17 00:00:00 2001
From: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Date: Tue, 14 Jul 2015 20:01:49 -0700
Subject: [PATCH 026/140] powerpc/perf/hv-24x7: Simplify extracting counter
 from result buffer

Simplify code that extracts a 24x7 counter from the HCALL's result buffer.

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/perf/hv-24x7.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/powerpc/perf/hv-24x7.c b/arch/powerpc/perf/hv-24x7.c
index 9d73c693e792..527c8b98e97e 100644
--- a/arch/powerpc/perf/hv-24x7.c
+++ b/arch/powerpc/perf/hv-24x7.c
@@ -1104,7 +1104,6 @@ static unsigned long single_24x7_request(struct perf_event *event, u64 *count)
 	unsigned long ret;
 	struct hv_24x7_request_buffer *request_buffer;
 	struct hv_24x7_data_result_buffer *result_buffer;
-	struct hv_24x7_result *resb;
 
 	BUILD_BUG_ON(sizeof(*request_buffer) > 4096);
 	BUILD_BUG_ON(sizeof(*result_buffer) > 4096);
@@ -1125,8 +1124,7 @@ static unsigned long single_24x7_request(struct perf_event *event, u64 *count)
 	}
 
 	/* process result from hcall */
-	resb = &result_buffer->results[0];
-	*count = be64_to_cpu(resb->elements[0].element_data[0]);
+	*count = be64_to_cpu(result_buffer->results[0].elements[0].element_data[0]);
 
 out:
 	put_cpu_var(hv_24x7_reqb);

From f0322f7f1e2165fbf83530a424ef6ebeacbf4bca Mon Sep 17 00:00:00 2001
From: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Date: Tue, 30 Jun 2015 13:50:28 +0530
Subject: [PATCH 027/140] powerpc/perf: Change type of the bhrb_users variable

This patch just changes data type of bhrb_users variable from
int to unsigned int because it never contains a negative value.

Reported-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/perf/core-book3s.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index d90893b76e7c..b0382f3f1095 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -53,7 +53,7 @@ struct cpu_hw_events {
 
 	/* BHRB bits */
 	u64				bhrb_filter;	/* BHRB HW branch filter */
-	int				bhrb_users;
+	unsigned int			bhrb_users;
 	void				*bhrb_context;
 	struct	perf_branch_stack	bhrb_stack;
 	struct	perf_branch_entry	bhrb_entries[BHRB_MAX_ENTRIES];
@@ -369,8 +369,8 @@ static void power_pmu_bhrb_disable(struct perf_event *event)
 	if (!ppmu->bhrb_nr)
 		return;
 
+	WARN_ON_ONCE(!cpuhw->bhrb_users);
 	cpuhw->bhrb_users--;
-	WARN_ON_ONCE(cpuhw->bhrb_users < 0);
 	perf_sched_cb_dec(event->ctx->pmu);
 
 	if (!cpuhw->disabled && !cpuhw->bhrb_users) {

From c3525940cca53cf3568fefd35d169fea4f107f0a Mon Sep 17 00:00:00 2001
From: Michael Ellerman <mpe@ellerman.id.au>
Date: Thu, 23 Jul 2015 20:21:01 +1000
Subject: [PATCH 028/140] powerpc/kernel: Switch to using MAX_ERRNO

Currently on powerpc we have our own #define for the highest (negative)
errno value, called _LAST_ERRNO. This is defined to be 516, for reasons
which are not clear.

The generic code, and x86, use MAX_ERRNO, which is defined to be 4095.

In particular seccomp uses MAX_ERRNO to restrict the value that a
seccomp filter can return.

Currently with the mismatch between _LAST_ERRNO and MAX_ERRNO, a seccomp
tracer wanting to return 600, expecting it to be seen as an error, would
instead find on powerpc that userspace sees a successful syscall with a
return value of 600.

To avoid this inconsistency, switch powerpc to use MAX_ERRNO.

We are somewhat confident that generic syscalls that can return a
non-error value above negative MAX_ERRNO have already been updated to
use force_successful_syscall_return().

I have also checked all the powerpc specific syscalls, and believe that
none of them expect to return a non-error value between -MAX_ERRNO and
-516. So this change should be safe ...

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
---
 arch/powerpc/include/uapi/asm/errno.h | 2 --
 arch/powerpc/kernel/entry_32.S        | 3 ++-
 arch/powerpc/kernel/entry_64.S        | 5 +++--
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/include/uapi/asm/errno.h b/arch/powerpc/include/uapi/asm/errno.h
index 8c145fd17d86..e8b6b5f7de7c 100644
--- a/arch/powerpc/include/uapi/asm/errno.h
+++ b/arch/powerpc/include/uapi/asm/errno.h
@@ -6,6 +6,4 @@
 #undef	EDEADLOCK
 #define	EDEADLOCK	58	/* File locking deadlock error */
 
-#define _LAST_ERRNO	516
-
 #endif	/* _ASM_POWERPC_ERRNO_H */
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 46fc0f4d8982..67ecdf61f4e3 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -20,6 +20,7 @@
  */
 
 #include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/sys.h>
 #include <linux/threads.h>
 #include <asm/reg.h>
@@ -354,7 +355,7 @@ ret_from_syscall:
 	SYNC
 	MTMSRD(r10)
 	lwz	r9,TI_FLAGS(r12)
-	li	r8,-_LAST_ERRNO
+	li	r8,-MAX_ERRNO
 	andi.	r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
 	bne-	syscall_exit_work
 	cmplw	0,r3,r8
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 579e0f9a2d57..ee15d3c62e26 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -19,6 +19,7 @@
  */
 
 #include <linux/errno.h>
+#include <linux/err.h>
 #include <asm/unistd.h>
 #include <asm/processor.h>
 #include <asm/page.h>
@@ -207,7 +208,7 @@ system_call:			/* label this so stack traces look sane */
 #endif /* CONFIG_PPC_BOOK3E */
 
 	ld	r9,TI_FLAGS(r12)
-	li	r11,-_LAST_ERRNO
+	li	r11,-MAX_ERRNO
 	andi.	r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
 	bne-	syscall_exit_work
 	cmpld	r3,r11
@@ -277,7 +278,7 @@ syscall_exit_work:
 	beq+	0f
 	REST_NVGPRS(r1)
 	b	2f
-0:	cmpld	r3,r11		/* r10 is -LAST_ERRNO */
+0:	cmpld	r3,r11		/* r11 is -MAX_ERRNO */
 	blt+	1f
 	andi.	r0,r9,_TIF_NOERROR
 	bne-	1f

From d38374142b2560f233961ed3756416c68af6c6cb Mon Sep 17 00:00:00 2001
From: Michael Ellerman <mpe@ellerman.id.au>
Date: Thu, 23 Jul 2015 20:21:02 +1000
Subject: [PATCH 029/140] powerpc/kernel: Change the do_syscall_trace_enter()
 API

The API for calling do_syscall_trace_enter() is currently sensible
enough, it just returns the (modified) syscall number.

However once we enable seccomp filter it will get more complicated. When
seccomp filter runs, the seccomp kernel code (via SECCOMP_RET_ERRNO), or
a ptracer (via SECCOMP_RET_TRACE), may reject the syscall and *may* or may
*not* set a return value in r3.

That means the assembler that calls do_syscall_trace_enter() can not
blindly return ENOSYS, it needs to only return ENOSYS if a return value
has not already been set.

There is no way to implement that logic with the current API. So change
the do_syscall_trace_enter() API to make it deal with the return code
juggling, and the assembler can then just return whatever return code it
is given.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
---
 arch/powerpc/kernel/entry_32.S |  4 +++
 arch/powerpc/kernel/entry_64.S | 23 +++++++++++-----
 arch/powerpc/kernel/ptrace.c   | 48 ++++++++++++++++++++++++++--------
 3 files changed, 58 insertions(+), 17 deletions(-)

diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 67ecdf61f4e3..2405631e91a2 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -458,6 +458,10 @@ syscall_dotrace:
 	lwz	r7,GPR7(r1)
 	lwz	r8,GPR8(r1)
 	REST_NVGPRS(r1)
+
+	cmplwi	r0,NR_syscalls
+	/* Return code is already in r3 thanks to do_syscall_trace_enter() */
+	bge-	ret_from_syscall
 	b	syscall_dotrace_cont
 
 syscall_exit_work:
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index ee15d3c62e26..a94f155db78e 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -151,8 +151,7 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
 	CURRENT_THREAD_INFO(r11, r1)
 	ld	r10,TI_FLAGS(r11)
 	andi.	r11,r10,_TIF_SYSCALL_DOTRACE
-	bne	syscall_dotrace
-.Lsyscall_dotrace_cont:
+	bne	syscall_dotrace		/* does not return */
 	cmpldi	0,r0,NR_syscalls
 	bge-	syscall_enosys
 
@@ -246,22 +245,34 @@ syscall_dotrace:
 	bl	save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	do_syscall_trace_enter
+
 	/*
-	 * Restore argument registers possibly just changed.
-	 * We use the return value of do_syscall_trace_enter
-	 * for the call number to look up in the table (r0).
+	 * We use the return value of do_syscall_trace_enter() as the syscall
+	 * number. If the syscall was rejected for any reason do_syscall_trace_enter()
+	 * returns an invalid syscall number and the test below against
+	 * NR_syscalls will fail.
 	 */
 	mr	r0,r3
+
+	/* Restore argument registers just clobbered and/or possibly changed. */
 	ld	r3,GPR3(r1)
 	ld	r4,GPR4(r1)
 	ld	r5,GPR5(r1)
 	ld	r6,GPR6(r1)
 	ld	r7,GPR7(r1)
 	ld	r8,GPR8(r1)
+
+	/* Repopulate r9 and r10 for the system_call path */
 	addi	r9,r1,STACK_FRAME_OVERHEAD
 	CURRENT_THREAD_INFO(r10, r1)
 	ld	r10,TI_FLAGS(r10)
-	b	.Lsyscall_dotrace_cont
+
+	cmpldi	r0,NR_syscalls
+	blt+	system_call
+
+	/* Return code is already in r3 thanks to do_syscall_trace_enter() */
+	b	.Lsyscall_exit
+
 
 syscall_enosys:
 	li	r3,-ENOSYS
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index f21897b42057..7484221bb3f8 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -1762,26 +1762,42 @@ long arch_ptrace(struct task_struct *child, long request,
 	return ret;
 }
 
-/*
- * We must return the syscall number to actually look up in the table.
- * This can be -1L to skip running any syscall at all.
+/**
+ * do_syscall_trace_enter() - Do syscall tracing on kernel entry.
+ * @regs: the pt_regs of the task to trace (current)
+ *
+ * Performs various types of tracing on syscall entry. This includes seccomp,
+ * ptrace, syscall tracepoints and audit.
+ *
+ * The pt_regs are potentially visible to userspace via ptrace, so their
+ * contents is ABI.
+ *
+ * One or more of the tracers may modify the contents of pt_regs, in particular
+ * to modify arguments or even the syscall number itself.
+ *
+ * It's also possible that a tracer can choose to reject the system call. In
+ * that case this function will return an illegal syscall number, and will put
+ * an appropriate return value in regs->r3.
+ *
+ * Return: the (possibly changed) syscall number.
  */
 long do_syscall_trace_enter(struct pt_regs *regs)
 {
-	long ret = 0;
+	bool abort = false;
 
 	user_exit();
 
 	secure_computing_strict(regs->gpr[0]);
 
-	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
-	    tracehook_report_syscall_entry(regs))
+	if (test_thread_flag(TIF_SYSCALL_TRACE)) {
 		/*
-		 * Tracing decided this syscall should not happen.
-		 * We'll return a bogus call number to get an ENOSYS
-		 * error, but leave the original number in regs->gpr[0].
+		 * The tracer may decide to abort the syscall, if so tracehook
+		 * will return !0. Note that the tracer may also just change
+		 * regs->gpr[0] to an invalid syscall number, that is handled
+		 * below on the exit path.
 		 */
-		ret = -1L;
+		abort = tracehook_report_syscall_entry(regs) != 0;
+	}
 
 	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
 		trace_sys_enter(regs, regs->gpr[0]);
@@ -1798,7 +1814,17 @@ long do_syscall_trace_enter(struct pt_regs *regs)
 				    regs->gpr[5] & 0xffffffff,
 				    regs->gpr[6] & 0xffffffff);
 
-	return ret ?: regs->gpr[0];
+	if (abort || regs->gpr[0] >= NR_syscalls) {
+		/*
+		 * If we are aborting explicitly, or if the syscall number is
+		 * now invalid, set the return value to -ENOSYS.
+		 */
+		regs->gpr[3] = -ENOSYS;
+		return -1;
+	}
+
+	/* Return the possibly modified but valid syscall number */
+	return regs->gpr[0];
 }
 
 void do_syscall_trace_leave(struct pt_regs *regs)

From 2923e6d503465e97a378d37a588e4e6987009bc7 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <mpe@ellerman.id.au>
Date: Thu, 23 Jul 2015 20:21:03 +1000
Subject: [PATCH 030/140] powerpc: Drop unused syscall_get_error()

syscall_get_error() is unused, and never has been.

It's also probably wrong, as it negates r3 before returning it, but that
depends on what the caller is expecting.

It also doesn't deal with compat, and doesn't deal with TIF_NOERROR.

Although we could fix those, until it has a caller and it's clear what
semantics the caller wants it's just untested code. So drop it.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
---
 arch/powerpc/include/asm/syscall.h | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/arch/powerpc/include/asm/syscall.h b/arch/powerpc/include/asm/syscall.h
index ff21b7a2f0cc..c6239dabcfb1 100644
--- a/arch/powerpc/include/asm/syscall.h
+++ b/arch/powerpc/include/asm/syscall.h
@@ -34,12 +34,6 @@ static inline void syscall_rollback(struct task_struct *task,
 	regs->gpr[3] = regs->orig_gpr3;
 }
 
-static inline long syscall_get_error(struct task_struct *task,
-				     struct pt_regs *regs)
-{
-	return (regs->ccr & 0x10000000) ? -regs->gpr[3] : 0;
-}
-
 static inline long syscall_get_return_value(struct task_struct *task,
 					    struct pt_regs *regs)
 {

From 1b1a3702a65c1a6511e4c95ecb3770dfdf235bcf Mon Sep 17 00:00:00 2001
From: Michael Ellerman <mpe@ellerman.id.au>
Date: Thu, 23 Jul 2015 20:21:04 +1000
Subject: [PATCH 031/140] powerpc: Don't negate error in
 syscall_set_return_value()

Currently the only caller of syscall_set_return_value() is seccomp
filter, which is not enabled on powerpc.

This means we have not noticed that our implementation of
syscall_set_return_value() negates error, even though the value passed
in is already negative.

So remove the negation in syscall_set_return_value(), and expect the
caller to do it like all other implementations do.

Also add a comment about the ccr handling.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
---
 arch/powerpc/include/asm/syscall.h | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/syscall.h b/arch/powerpc/include/asm/syscall.h
index c6239dabcfb1..cabe90133e69 100644
--- a/arch/powerpc/include/asm/syscall.h
+++ b/arch/powerpc/include/asm/syscall.h
@@ -44,9 +44,15 @@ static inline void syscall_set_return_value(struct task_struct *task,
 					    struct pt_regs *regs,
 					    int error, long val)
 {
+	/*
+	 * In the general case it's not obvious that we must deal with CCR
+	 * here, as the syscall exit path will also do that for us. However
+	 * there are some places, eg. the signal code, which check ccr to
+	 * decide if the value in r3 is actually an error.
+	 */
 	if (error) {
 		regs->ccr |= 0x10000000L;
-		regs->gpr[3] = -error;
+		regs->gpr[3] = error;
 	} else {
 		regs->ccr &= ~0x10000000L;
 		regs->gpr[3] = val;

From a7657844296e796bf33922192743ddeacbcd4d7a Mon Sep 17 00:00:00 2001
From: Michael Ellerman <mpe@ellerman.id.au>
Date: Thu, 23 Jul 2015 20:21:05 +1000
Subject: [PATCH 032/140] powerpc: Rework syscall_get_arguments() so there is
 only one loop

Currently syscall_get_arguments() has two loops, one for compat and one
for regular tasks. In prepartion for the next patch, which changes which
registers we use, switch it to only have one loop, so we only have one
place to update.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
---
 arch/powerpc/include/asm/syscall.h | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

diff --git a/arch/powerpc/include/asm/syscall.h b/arch/powerpc/include/asm/syscall.h
index cabe90133e69..403e2303fe18 100644
--- a/arch/powerpc/include/asm/syscall.h
+++ b/arch/powerpc/include/asm/syscall.h
@@ -64,19 +64,16 @@ static inline void syscall_get_arguments(struct task_struct *task,
 					 unsigned int i, unsigned int n,
 					 unsigned long *args)
 {
+	unsigned long mask = -1UL;
+
 	BUG_ON(i + n > 6);
-#ifdef CONFIG_PPC64
-	if (test_tsk_thread_flag(task, TIF_32BIT)) {
-		/*
-		 * Zero-extend 32-bit argument values.  The high bits are
-		 * garbage ignored by the actual syscall dispatch.
-		 */
-		while (n-- > 0)
-			args[n] = (u32) regs->gpr[3 + i + n];
-		return;
-	}
+
+#ifdef CONFIG_COMPAT
+	if (test_tsk_thread_flag(task, TIF_32BIT))
+		mask = 0xffffffff;
 #endif
-	memcpy(args, &regs->gpr[3 + i], n * sizeof(args[0]));
+	while (n--)
+		args[n] = regs->gpr[3 + i + n] & mask;
 }
 
 static inline void syscall_set_arguments(struct task_struct *task,

From 1cb9839b73e7f2b006a1cc9452c30f15ff8b1748 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <mpe@ellerman.id.au>
Date: Thu, 23 Jul 2015 20:21:06 +1000
Subject: [PATCH 033/140] powerpc: Use orig_gpr3 in syscall_get_arguments()

Currently syscall_get_arguments() is used by syscall tracepoints, and
collect_syscall() which is used in some debugging as well as
/proc/pid/syscall.

The current implementation just copies regs->gpr[3 .. 5] out, which is
fine for all the current use cases.

When we enable seccomp filter, that will also start using
syscall_get_arguments(). However for seccomp filter we want to use r3
as the return value of the syscall, and orig_gpr3 as the first
parameter. This will allow seccomp to modify the return value in r3.

To support this we need to modify syscall_get_arguments() to return
orig_gpr3 instead of r3. This is safe for all uses because orig_gpr3
always contains the r3 value that was passed to the syscall. We store it
in the syscall entry path and never modify it.

Update syscall_set_arguments() while we're here, even though it's never
used.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
---
 arch/powerpc/include/asm/syscall.h | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/include/asm/syscall.h b/arch/powerpc/include/asm/syscall.h
index 403e2303fe18..8d79a87c0511 100644
--- a/arch/powerpc/include/asm/syscall.h
+++ b/arch/powerpc/include/asm/syscall.h
@@ -64,7 +64,7 @@ static inline void syscall_get_arguments(struct task_struct *task,
 					 unsigned int i, unsigned int n,
 					 unsigned long *args)
 {
-	unsigned long mask = -1UL;
+	unsigned long val, mask = -1UL;
 
 	BUG_ON(i + n > 6);
 
@@ -72,8 +72,14 @@ static inline void syscall_get_arguments(struct task_struct *task,
 	if (test_tsk_thread_flag(task, TIF_32BIT))
 		mask = 0xffffffff;
 #endif
-	while (n--)
-		args[n] = regs->gpr[3 + i + n] & mask;
+	while (n--) {
+		if (n == 0 && i == 0)
+			val = regs->orig_gpr3;
+		else
+			val = regs->gpr[3 + i + n];
+
+		args[n] = val & mask;
+	}
 }
 
 static inline void syscall_set_arguments(struct task_struct *task,
@@ -83,6 +89,10 @@ static inline void syscall_set_arguments(struct task_struct *task,
 {
 	BUG_ON(i + n > 6);
 	memcpy(&regs->gpr[3 + i], args, n * sizeof(args[0]));
+
+	/* Also copy the first argument into orig_gpr3 */
+	if (i == 0 && n > 0)
+		regs->orig_gpr3 = args[0];
 }
 
 static inline int syscall_get_arch(void)

From e9fbe6863281b942d7eea44c6ccabc30f46ab44f Mon Sep 17 00:00:00 2001
From: Michael Ellerman <mpe@ellerman.id.au>
Date: Thu, 23 Jul 2015 20:21:07 +1000
Subject: [PATCH 034/140] powerpc: Change syscall_get_nr() to return int

The documentation for syscall_get_nr() in asm-generic says:

 Note this returns int even on 64-bit machines. Only 32 bits of
 system call number can be meaningful. If the actual arch value
 is 64 bits, this truncates to 32 bits so 0xffffffff means -1.

However our implementation was never updated to reflect this.

Generally it's not important, but there is once case where it matters.

For seccomp filter with SECCOMP_RET_TRACE, the tracer will set
regs->gpr[0] to -1 to reject the syscall. When the task is a compat
task, this means we end up with 0xffffffff in r0 because ptrace will
zero extend the 32-bit value.

If syscall_get_nr() returns an unsigned long, then a 64-bit kernel will
see a positive value in r0 and will incorrectly allow the syscall
through seccomp.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
---
 arch/powerpc/include/asm/syscall.h | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/include/asm/syscall.h b/arch/powerpc/include/asm/syscall.h
index 8d79a87c0511..ab9f3f0a8637 100644
--- a/arch/powerpc/include/asm/syscall.h
+++ b/arch/powerpc/include/asm/syscall.h
@@ -22,10 +22,15 @@
 extern const unsigned long sys_call_table[];
 #endif /* CONFIG_FTRACE_SYSCALLS */
 
-static inline long syscall_get_nr(struct task_struct *task,
-				  struct pt_regs *regs)
+static inline int syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
 {
-	return TRAP(regs) == 0xc00 ? regs->gpr[0] : -1L;
+	/*
+	 * Note that we are returning an int here. That means 0xffffffff, ie.
+	 * 32-bit negative 1, will be interpreted as -1 on a 64-bit kernel.
+	 * This is important for seccomp so that compat tasks can set r0 = -1
+	 * to reject the syscall.
+	 */
+	return TRAP(regs) == 0xc00 ? regs->gpr[0] : -1;
 }
 
 static inline void syscall_rollback(struct task_struct *task,

From 1b60bab04e03d7ed74826dc20fda9d907d011313 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <mpe@ellerman.id.au>
Date: Thu, 23 Jul 2015 20:21:08 +1000
Subject: [PATCH 035/140] powerpc/kernel: Add SIG_SYS support for compat tasks

SIG_SYS was added in commit a0727e8ce513 "signal, x86: add SIGSYS info
and make it synchronous."

Because we use the asm-generic struct siginfo, we got support for
SIG_SYS for free as part of that commit.

However there was no compat handling added for powerpc. That means we've
been advertising the existence of signfo._sifields._sigsys to compat
tasks, but not actually filling in the fields correctly.

Luckily it looks like no one has noticed, presumably because the only
user of SIGSYS in the kernel is seccomp filter, which we don't support
yet.

So before we enable seccomp filter, add compat handling for SIGSYS.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
---
 arch/powerpc/include/asm/compat.h | 7 +++++++
 arch/powerpc/kernel/signal_32.c   | 5 +++++
 2 files changed, 12 insertions(+)

diff --git a/arch/powerpc/include/asm/compat.h b/arch/powerpc/include/asm/compat.h
index b142b8e0ed9e..4f2df589ec1d 100644
--- a/arch/powerpc/include/asm/compat.h
+++ b/arch/powerpc/include/asm/compat.h
@@ -174,6 +174,13 @@ typedef struct compat_siginfo {
 			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
 			int _fd;
 		} _sigpoll;
+
+		/* SIGSYS */
+		struct {
+			unsigned int _call_addr; /* calling insn */
+			int _syscall;		 /* triggering system call number */
+			unsigned int _arch;	 /* AUDIT_ARCH_* of syscall */
+		} _sigsys;
 	} _sifields;
 } compat_siginfo_t;
 
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index d3a831ac0f92..77f97284124e 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -949,6 +949,11 @@ int copy_siginfo_to_user32(struct compat_siginfo __user *d, const siginfo_t *s)
 		err |= __put_user(s->si_overrun, &d->si_overrun);
 		err |= __put_user(s->si_int, &d->si_int);
 		break;
+	case __SI_SYS >> 16:
+		err |= __put_user(ptr_to_compat(s->si_call_addr), &d->si_call_addr);
+		err |= __put_user(s->si_syscall, &d->si_syscall);
+		err |= __put_user(s->si_arch, &d->si_arch);
+		break;
 	case __SI_RT >> 16: /* This is not generated by the kernel as of now.  */
 	case __SI_MESGQ >> 16:
 		err |= __put_user(s->si_int, &d->si_int);

From 2449acc5348b94325e9374056b2cc3ed55816e96 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <mpe@ellerman.id.au>
Date: Thu, 23 Jul 2015 20:21:09 +1000
Subject: [PATCH 036/140] powerpc/kernel: Enable seccomp filter

This commit enables seccomp filter on powerpc, now that we have all the
necessary pieces in place.

To support seccomp's desire to modify the syscall return value under
some circumstances, we use a different ABI to the ptrace ABI. That is we
use r3 as the syscall return value, and orig_gpr3 is the first syscall
parameter.

This means the seccomp code, or a ptracer via SECCOMP_RET_TRACE, will
see -ENOSYS preloaded in r3. This is identical to the behaviour on x86,
and allows seccomp or the ptracer to either leave the -ENOSYS or change
it to something else, as well as rejecting or not the syscall by
modifying r0.

If seccomp does not reject the syscall, we restore the register state to
match what ptrace and audit expect, ie. r3 is the first syscall
parameter again. We do this restore using orig_gpr3, which may have been
modified by seccomp, which allows seccomp to modify the first syscall
paramater and allow the syscall to proceed.

We need to #ifdef the the additional handling of r3 for seccomp, so move
it all out of line.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
---
 arch/powerpc/Kconfig         |  1 +
 arch/powerpc/kernel/ptrace.c | 41 +++++++++++++++++++++++++++++++++++-
 2 files changed, 41 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index fe2f2c595fd9..4139644030fb 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -159,6 +159,7 @@ config PPC
 	select EDAC_SUPPORT
 	select EDAC_ATOMIC_SCRUB
 	select ARCH_HAS_DMA_SET_COHERENT_MASK
+	select HAVE_ARCH_SECCOMP_FILTER
 
 config GENERIC_CSUM
 	def_bool CPU_LITTLE_ENDIAN
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 7484221bb3f8..737c0d0b53ac 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -1762,6 +1762,44 @@ long arch_ptrace(struct task_struct *child, long request,
 	return ret;
 }
 
+#ifdef CONFIG_SECCOMP
+static int do_seccomp(struct pt_regs *regs)
+{
+	if (!test_thread_flag(TIF_SECCOMP))
+		return 0;
+
+	/*
+	 * The ABI we present to seccomp tracers is that r3 contains
+	 * the syscall return value and orig_gpr3 contains the first
+	 * syscall parameter. This is different to the ptrace ABI where
+	 * both r3 and orig_gpr3 contain the first syscall parameter.
+	 */
+	regs->gpr[3] = -ENOSYS;
+
+	/*
+	 * We use the __ version here because we have already checked
+	 * TIF_SECCOMP. If this fails, there is nothing left to do, we
+	 * have already loaded -ENOSYS into r3, or seccomp has put
+	 * something else in r3 (via SECCOMP_RET_ERRNO/TRACE).
+	 */
+	if (__secure_computing())
+		return -1;
+
+	/*
+	 * The syscall was allowed by seccomp, restore the register
+	 * state to what ptrace and audit expect.
+	 * Note that we use orig_gpr3, which means a seccomp tracer can
+	 * modify the first syscall parameter (in orig_gpr3) and also
+	 * allow the syscall to proceed.
+	 */
+	regs->gpr[3] = regs->orig_gpr3;
+
+	return 0;
+}
+#else
+static inline int do_seccomp(struct pt_regs *regs) { return 0; }
+#endif /* CONFIG_SECCOMP */
+
 /**
  * do_syscall_trace_enter() - Do syscall tracing on kernel entry.
  * @regs: the pt_regs of the task to trace (current)
@@ -1787,7 +1825,8 @@ long do_syscall_trace_enter(struct pt_regs *regs)
 
 	user_exit();
 
-	secure_computing_strict(regs->gpr[0]);
+	if (do_seccomp(regs))
+		return -1;
 
 	if (test_thread_flag(TIF_SYSCALL_TRACE)) {
 		/*

From c385d0db30f3c0bf687a080c38e8088c342116a3 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <mpe@ellerman.id.au>
Date: Thu, 23 Jul 2015 20:21:10 +1000
Subject: [PATCH 037/140] selftests/seccomp: Make seccomp tests work on big
 endian

The seccomp_bpf test uses BPF_LD|BPF_W|BPF_ABS to load 32-bit values
from seccomp_data->args. On big endian machines this will load the high
word of the argument, which is not what the test wants.

Borrow a hack from samples/seccomp/bpf-helper.h which changes the offset
on big endian to account for this.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Kees Cook <keescook@chromium.org>
---
 tools/testing/selftests/seccomp/seccomp_bpf.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c
index c5abe7fd7590..2303a8dff9a2 100644
--- a/tools/testing/selftests/seccomp/seccomp_bpf.c
+++ b/tools/testing/selftests/seccomp/seccomp_bpf.c
@@ -82,7 +82,13 @@ struct seccomp_data {
 };
 #endif
 
+#if __BYTE_ORDER == __LITTLE_ENDIAN
 #define syscall_arg(_n) (offsetof(struct seccomp_data, args[_n]))
+#elif __BYTE_ORDER == __BIG_ENDIAN
+#define syscall_arg(_n) (offsetof(struct seccomp_data, args[_n]) + sizeof(__u32))
+#else
+#error "wut? Unknown __BYTE_ORDER?!"
+#endif
 
 #define SIBLING_EXIT_UNKILLED	0xbadbeef
 #define SIBLING_EXIT_FAILURE	0xbadface

From 5d83c2b37d435b88452bc88a2a47672346efb2b4 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <mpe@ellerman.id.au>
Date: Thu, 23 Jul 2015 20:21:11 +1000
Subject: [PATCH 038/140] selftests/seccomp: Add powerpc support

Wire up the syscall number and regs so the tests work on powerpc.

With the powerpc kernel support just merged, all tests pass on ppc64,
ppc64 (compat), ppc64le, ppc, ppc64e and ppc64e (compat).

Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 tools/testing/selftests/seccomp/seccomp_bpf.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c
index 2303a8dff9a2..a004b4cce99e 100644
--- a/tools/testing/selftests/seccomp/seccomp_bpf.c
+++ b/tools/testing/selftests/seccomp/seccomp_bpf.c
@@ -14,6 +14,7 @@
 #include <linux/filter.h>
 #include <sys/prctl.h>
 #include <sys/ptrace.h>
+#include <sys/types.h>
 #include <sys/user.h>
 #include <linux/prctl.h>
 #include <linux/ptrace.h>
@@ -1205,6 +1206,10 @@ TEST_F(TRACE_poke, getpid_runs_normally)
 # define ARCH_REGS	struct user_pt_regs
 # define SYSCALL_NUM	regs[8]
 # define SYSCALL_RET	regs[0]
+#elif defined(__powerpc__)
+# define ARCH_REGS	struct pt_regs
+# define SYSCALL_NUM	gpr[0]
+# define SYSCALL_RET	gpr[3]
 #else
 # error "Do not know how to find your architecture's registers and syscalls"
 #endif
@@ -1238,7 +1243,7 @@ void change_syscall(struct __test_metadata *_metadata,
 	ret = ptrace(PTRACE_GETREGSET, tracee, NT_PRSTATUS, &iov);
 	EXPECT_EQ(0, ret);
 
-#if defined(__x86_64__) || defined(__i386__) || defined(__aarch64__)
+#if defined(__x86_64__) || defined(__i386__) || defined(__aarch64__) || defined(__powerpc__)
 	{
 		regs.SYSCALL_NUM = syscall;
 	}
@@ -1402,6 +1407,8 @@ TEST_F(TRACE_syscall, syscall_dropped)
 #  define __NR_seccomp 383
 # elif defined(__aarch64__)
 #  define __NR_seccomp 277
+# elif defined(__powerpc__)
+#  define __NR_seccomp 358
 # else
 #  warning "seccomp syscall number unknown for this architecture"
 #  define __NR_seccomp 0xffff

From c33e11d0dd2ebd2cd528aa8e9ef46afdd4d766b0 Mon Sep 17 00:00:00 2001
From: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Date: Tue, 5 May 2015 13:34:58 +0530
Subject: [PATCH 039/140] powerpc/powernv: display reason for Malfunction Alert
 HMI.

The V2 version of HMI event now carries additional information for
Malfunction Alert. It now contains error information about CORE and NX
checkstop. This patch checks and displays the check stop reason before
panic.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/opal-api.h       |  61 ++++++++++
 arch/powerpc/platforms/powernv/opal-hmi.c | 132 ++++++++++++++++++++++
 2 files changed, 193 insertions(+)

diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index 442995bacb33..4de3c69337cc 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -437,6 +437,7 @@ struct OpalMemoryErrorData {
 /* HMI interrupt event */
 enum OpalHMI_Version {
 	OpalHMIEvt_V1 = 1,
+	OpalHMIEvt_V2 = 2,
 };
 
 enum OpalHMI_Severity {
@@ -467,6 +468,49 @@ enum OpalHMI_ErrType {
 	OpalHMI_ERROR_CAPP_RECOVERY,
 };
 
+enum OpalHMI_XstopType {
+	CHECKSTOP_TYPE_UNKNOWN	=	0,
+	CHECKSTOP_TYPE_CORE	=	1,
+	CHECKSTOP_TYPE_NX	=	2,
+};
+
+enum OpalHMI_CoreXstopReason {
+	CORE_CHECKSTOP_IFU_REGFILE		= 0x00000001,
+	CORE_CHECKSTOP_IFU_LOGIC		= 0x00000002,
+	CORE_CHECKSTOP_PC_DURING_RECOV		= 0x00000004,
+	CORE_CHECKSTOP_ISU_REGFILE		= 0x00000008,
+	CORE_CHECKSTOP_ISU_LOGIC		= 0x00000010,
+	CORE_CHECKSTOP_FXU_LOGIC		= 0x00000020,
+	CORE_CHECKSTOP_VSU_LOGIC		= 0x00000040,
+	CORE_CHECKSTOP_PC_RECOV_IN_MAINT_MODE	= 0x00000080,
+	CORE_CHECKSTOP_LSU_REGFILE		= 0x00000100,
+	CORE_CHECKSTOP_PC_FWD_PROGRESS		= 0x00000200,
+	CORE_CHECKSTOP_LSU_LOGIC		= 0x00000400,
+	CORE_CHECKSTOP_PC_LOGIC			= 0x00000800,
+	CORE_CHECKSTOP_PC_HYP_RESOURCE		= 0x00001000,
+	CORE_CHECKSTOP_PC_HANG_RECOV_FAILED	= 0x00002000,
+	CORE_CHECKSTOP_PC_AMBI_HANG_DETECTED	= 0x00004000,
+	CORE_CHECKSTOP_PC_DEBUG_TRIG_ERR_INJ	= 0x00008000,
+	CORE_CHECKSTOP_PC_SPRD_HYP_ERR_INJ	= 0x00010000,
+};
+
+enum OpalHMI_NestAccelXstopReason {
+	NX_CHECKSTOP_SHM_INVAL_STATE_ERR	= 0x00000001,
+	NX_CHECKSTOP_DMA_INVAL_STATE_ERR_1	= 0x00000002,
+	NX_CHECKSTOP_DMA_INVAL_STATE_ERR_2	= 0x00000004,
+	NX_CHECKSTOP_DMA_CH0_INVAL_STATE_ERR	= 0x00000008,
+	NX_CHECKSTOP_DMA_CH1_INVAL_STATE_ERR	= 0x00000010,
+	NX_CHECKSTOP_DMA_CH2_INVAL_STATE_ERR	= 0x00000020,
+	NX_CHECKSTOP_DMA_CH3_INVAL_STATE_ERR	= 0x00000040,
+	NX_CHECKSTOP_DMA_CH4_INVAL_STATE_ERR	= 0x00000080,
+	NX_CHECKSTOP_DMA_CH5_INVAL_STATE_ERR	= 0x00000100,
+	NX_CHECKSTOP_DMA_CH6_INVAL_STATE_ERR	= 0x00000200,
+	NX_CHECKSTOP_DMA_CH7_INVAL_STATE_ERR	= 0x00000400,
+	NX_CHECKSTOP_DMA_CRB_UE			= 0x00000800,
+	NX_CHECKSTOP_DMA_CRB_SUE		= 0x00001000,
+	NX_CHECKSTOP_PBI_ISN_UE			= 0x00002000,
+};
+
 struct OpalHMIEvent {
 	uint8_t		version;	/* 0x00 */
 	uint8_t		severity;	/* 0x01 */
@@ -477,6 +521,23 @@ struct OpalHMIEvent {
 	__be64		hmer;
 	/* TFMR register. Valid only for TFAC and TFMR_PARITY error type. */
 	__be64		tfmr;
+
+	/* version 2 and later */
+	union {
+		/*
+		 * checkstop info (Core/NX).
+		 * Valid for OpalHMI_ERROR_MALFUNC_ALERT.
+		 */
+		struct {
+			uint8_t	xstop_type;	/* enum OpalHMI_XstopType */
+			uint8_t reserved_1[3];
+			__be32  xstop_reason;
+			union {
+				__be32 pir;	/* for CHECKSTOP_TYPE_CORE */
+				__be32 chip_id;	/* for CHECKSTOP_TYPE_NX */
+			} u;
+		} xstop_error;
+	} u;
 };
 
 enum {
diff --git a/arch/powerpc/platforms/powernv/opal-hmi.c b/arch/powerpc/platforms/powernv/opal-hmi.c
index a8f49d380449..a683dfeb2ac8 100644
--- a/arch/powerpc/platforms/powernv/opal-hmi.c
+++ b/arch/powerpc/platforms/powernv/opal-hmi.c
@@ -35,9 +35,134 @@ struct OpalHmiEvtNode {
 	struct list_head list;
 	struct OpalHMIEvent hmi_evt;
 };
+
+struct xstop_reason {
+	uint32_t xstop_reason;
+	const char *unit_failed;
+	const char *description;
+};
+
 static LIST_HEAD(opal_hmi_evt_list);
 static DEFINE_SPINLOCK(opal_hmi_evt_lock);
 
+static void print_core_checkstop_reason(const char *level,
+					struct OpalHMIEvent *hmi_evt)
+{
+	int i;
+	static const struct xstop_reason xstop_reason[] = {
+		{ CORE_CHECKSTOP_IFU_REGFILE, "IFU",
+				"RegFile core check stop" },
+		{ CORE_CHECKSTOP_IFU_LOGIC, "IFU", "Logic core check stop" },
+		{ CORE_CHECKSTOP_PC_DURING_RECOV, "PC",
+				"Core checkstop during recovery" },
+		{ CORE_CHECKSTOP_ISU_REGFILE, "ISU",
+				"RegFile core check stop (mapper error)" },
+		{ CORE_CHECKSTOP_ISU_LOGIC, "ISU", "Logic core check stop" },
+		{ CORE_CHECKSTOP_FXU_LOGIC, "FXU", "Logic core check stop" },
+		{ CORE_CHECKSTOP_VSU_LOGIC, "VSU", "Logic core check stop" },
+		{ CORE_CHECKSTOP_PC_RECOV_IN_MAINT_MODE, "PC",
+				"Recovery in maintenance mode" },
+		{ CORE_CHECKSTOP_LSU_REGFILE, "LSU",
+				"RegFile core check stop" },
+		{ CORE_CHECKSTOP_PC_FWD_PROGRESS, "PC",
+				"Forward Progress Error" },
+		{ CORE_CHECKSTOP_LSU_LOGIC, "LSU", "Logic core check stop" },
+		{ CORE_CHECKSTOP_PC_LOGIC, "PC", "Logic core check stop" },
+		{ CORE_CHECKSTOP_PC_HYP_RESOURCE, "PC",
+				"Hypervisor Resource error - core check stop" },
+		{ CORE_CHECKSTOP_PC_HANG_RECOV_FAILED, "PC",
+				"Hang Recovery Failed (core check stop)" },
+		{ CORE_CHECKSTOP_PC_AMBI_HANG_DETECTED, "PC",
+				"Ambiguous Hang Detected (unknown source)" },
+		{ CORE_CHECKSTOP_PC_DEBUG_TRIG_ERR_INJ, "PC",
+				"Debug Trigger Error inject" },
+		{ CORE_CHECKSTOP_PC_SPRD_HYP_ERR_INJ, "PC",
+				"Hypervisor check stop via SPRC/SPRD" },
+	};
+
+	/* Validity check */
+	if (!hmi_evt->u.xstop_error.xstop_reason) {
+		printk("%s	Unknown Core check stop.\n", level);
+		return;
+	}
+
+	printk("%s	CPU PIR: %08x\n", level,
+			be32_to_cpu(hmi_evt->u.xstop_error.u.pir));
+	for (i = 0; i < ARRAY_SIZE(xstop_reason); i++)
+		if (be32_to_cpu(hmi_evt->u.xstop_error.xstop_reason) &
+					xstop_reason[i].xstop_reason)
+			printk("%s	[Unit: %-3s] %s\n", level,
+					xstop_reason[i].unit_failed,
+					xstop_reason[i].description);
+}
+
+static void print_nx_checkstop_reason(const char *level,
+					struct OpalHMIEvent *hmi_evt)
+{
+	int i;
+	static const struct xstop_reason xstop_reason[] = {
+		{ NX_CHECKSTOP_SHM_INVAL_STATE_ERR, "DMA & Engine",
+					"SHM invalid state error" },
+		{ NX_CHECKSTOP_DMA_INVAL_STATE_ERR_1, "DMA & Engine",
+					"DMA invalid state error bit 15" },
+		{ NX_CHECKSTOP_DMA_INVAL_STATE_ERR_2, "DMA & Engine",
+					"DMA invalid state error bit 16" },
+		{ NX_CHECKSTOP_DMA_CH0_INVAL_STATE_ERR, "DMA & Engine",
+					"Channel 0 invalid state error" },
+		{ NX_CHECKSTOP_DMA_CH1_INVAL_STATE_ERR, "DMA & Engine",
+					"Channel 1 invalid state error" },
+		{ NX_CHECKSTOP_DMA_CH2_INVAL_STATE_ERR, "DMA & Engine",
+					"Channel 2 invalid state error" },
+		{ NX_CHECKSTOP_DMA_CH3_INVAL_STATE_ERR, "DMA & Engine",
+					"Channel 3 invalid state error" },
+		{ NX_CHECKSTOP_DMA_CH4_INVAL_STATE_ERR, "DMA & Engine",
+					"Channel 4 invalid state error" },
+		{ NX_CHECKSTOP_DMA_CH5_INVAL_STATE_ERR, "DMA & Engine",
+					"Channel 5 invalid state error" },
+		{ NX_CHECKSTOP_DMA_CH6_INVAL_STATE_ERR, "DMA & Engine",
+					"Channel 6 invalid state error" },
+		{ NX_CHECKSTOP_DMA_CH7_INVAL_STATE_ERR, "DMA & Engine",
+					"Channel 7 invalid state error" },
+		{ NX_CHECKSTOP_DMA_CRB_UE, "DMA & Engine",
+					"UE error on CRB(CSB address, CCB)" },
+		{ NX_CHECKSTOP_DMA_CRB_SUE, "DMA & Engine",
+					"SUE error on CRB(CSB address, CCB)" },
+		{ NX_CHECKSTOP_PBI_ISN_UE, "PowerBus Interface",
+		"CRB Kill ISN received while holding ISN with UE error" },
+	};
+
+	/* Validity check */
+	if (!hmi_evt->u.xstop_error.xstop_reason) {
+		printk("%s	Unknown NX check stop.\n", level);
+		return;
+	}
+
+	printk("%s	NX checkstop on CHIP ID: %x\n", level,
+			be32_to_cpu(hmi_evt->u.xstop_error.u.chip_id));
+	for (i = 0; i < ARRAY_SIZE(xstop_reason); i++)
+		if (be32_to_cpu(hmi_evt->u.xstop_error.xstop_reason) &
+					xstop_reason[i].xstop_reason)
+			printk("%s	[Unit: %-3s] %s\n", level,
+					xstop_reason[i].unit_failed,
+					xstop_reason[i].description);
+}
+
+static void print_checkstop_reason(const char *level,
+					struct OpalHMIEvent *hmi_evt)
+{
+	switch (hmi_evt->u.xstop_error.xstop_type) {
+	case CHECKSTOP_TYPE_CORE:
+		print_core_checkstop_reason(level, hmi_evt);
+		break;
+	case CHECKSTOP_TYPE_NX:
+		print_nx_checkstop_reason(level, hmi_evt);
+		break;
+	case CHECKSTOP_TYPE_UNKNOWN:
+		printk("%s	Unknown Malfunction Alert.\n", level);
+		break;
+	}
+}
+
 static void print_hmi_event_info(struct OpalHMIEvent *hmi_evt)
 {
 	const char *level, *sevstr, *error_info;
@@ -95,6 +220,13 @@ static void print_hmi_event_info(struct OpalHMIEvent *hmi_evt)
 		(hmi_evt->type == OpalHMI_ERROR_TFMR_PARITY))
 		printk("%s	TFMR: %016llx\n", level,
 						be64_to_cpu(hmi_evt->tfmr));
+
+	if (hmi_evt->version < OpalHMIEvt_V2)
+		return;
+
+	/* OpalHMIEvt_V2 and above provides reason for malfunction alert. */
+	if (hmi_evt->type == OpalHMI_ERROR_MALFUNC_ALERT)
+		print_checkstop_reason(level, hmi_evt);
 }
 
 static void hmi_event_handler(struct work_struct *work)

From 1852ae276ba6d5d481c3fb193054ebb67068be5c Mon Sep 17 00:00:00 2001
From: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Date: Tue, 5 May 2015 13:35:43 +0530
Subject: [PATCH 040/140] powerpc/powernv: Pull all HMI events before panic.

In the event of unrecovered HMI the existing code panics as soon as
it receives the first unrecovered HMI event. This makes host to report
partial information about HMIs before panic. There may be more errors
which would have caused the HMI and hence more HMI event would have been
generated waiting to be pulled by host. This patch implements a logic to
pull and display all the HMI event before going down panic path.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/platforms/powernv/opal-hmi.c | 26 +++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/opal-hmi.c b/arch/powerpc/platforms/powernv/opal-hmi.c
index a683dfeb2ac8..acefdf9646f5 100644
--- a/arch/powerpc/platforms/powernv/opal-hmi.c
+++ b/arch/powerpc/platforms/powernv/opal-hmi.c
@@ -235,6 +235,8 @@ static void hmi_event_handler(struct work_struct *work)
 	struct OpalHMIEvent *hmi_evt;
 	struct OpalHmiEvtNode *msg_node;
 	uint8_t disposition;
+	struct opal_msg msg;
+	int unrecoverable = 0;
 
 	spin_lock_irqsave(&opal_hmi_evt_lock, flags);
 	while (!list_empty(&opal_hmi_evt_list)) {
@@ -250,14 +252,34 @@ static void hmi_event_handler(struct work_struct *work)
 
 		/*
 		 * Check if HMI event has been recovered or not. If not
-		 * then we can't continue, invoke panic.
+		 * then kernel can't continue, we need to panic.
+		 * But before we do that, display all the HMI event
+		 * available on the list and set unrecoverable flag to 1.
 		 */
 		if (disposition != OpalHMI_DISPOSITION_RECOVERED)
-			panic("Unrecoverable HMI exception");
+			unrecoverable = 1;
 
 		spin_lock_irqsave(&opal_hmi_evt_lock, flags);
 	}
 	spin_unlock_irqrestore(&opal_hmi_evt_lock, flags);
+
+	if (unrecoverable) {
+		/* Pull all HMI events from OPAL before we panic. */
+		while (opal_get_msg(__pa(&msg), sizeof(msg)) == OPAL_SUCCESS) {
+			u32 type;
+
+			type = be32_to_cpu(msg.msg_type);
+
+			/* skip if not HMI event */
+			if (type != OPAL_MSG_HMI_EVT)
+				continue;
+
+			/* HMI event info starts from param[0] */
+			hmi_evt = (struct OpalHMIEvent *)&msg.params[0];
+			print_hmi_event_info(hmi_evt);
+		}
+		panic("Unrecoverable HMI exception");
+	}
 }
 
 static DECLARE_WORK(hmi_event_work, hmi_event_handler);

From e784b6499d9cba83b7f3f032b7ee01f7ca96ad91 Mon Sep 17 00:00:00 2001
From: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Date: Fri, 31 Jul 2015 21:24:38 +0530
Subject: [PATCH 041/140] powerpc/powernv: Invoke opal_cec_reboot2() on
 unrecoverable machine check errors.

On non-recoverable MCE errors in kernel space, Linux kernel panics
and system reboots. On BMC based system opal-prd runs as a daemon
in the host. Hence, kernel crash may prevent opal-prd to detect and
analyze this MCE error. This may land us in a situation where the faulty
memory never gets de-configured and Linux would keep hitting same MCE error
again and again. If this happens in early stage of kernel initialization,
then Linux will keep crashing and rebooting in a loop.

This patch fixes this issue by invoking new opal_cec_reboot2() call with
reboot type OPAL_REBOOT_PLATFORM_ERROR to inform BMC/OCC about this
error, so that BMC can collect relevant data for error analysis and
decide what component to de-configure before rebooting.

This patch is dependent on OPAL patchset posted on skiboot mailing list
at https://lists.ozlabs.org/pipermail/skiboot/2015-July/001771.html that
introduces opal_cec_reboot2() opal call.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/opal-api.h           |  9 ++++-
 arch/powerpc/include/asm/opal.h               |  1 +
 .../powerpc/platforms/powernv/opal-wrappers.S |  1 +
 arch/powerpc/platforms/powernv/opal.c         | 35 +++++++++++++++++++
 4 files changed, 45 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index 4de3c69337cc..47d549ab2c18 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -154,7 +154,8 @@
 #define OPAL_FLASH_WRITE			111
 #define OPAL_FLASH_ERASE			112
 #define OPAL_PRD_MSG				113
-#define OPAL_LAST				113
+#define OPAL_CEC_REBOOT2			116
+#define OPAL_LAST				116
 
 /* Device tree flags */
 
@@ -857,6 +858,12 @@ enum OpalSysCooling {
 	OPAL_SYSCOOL_INSF	= 0x0001, /* System insufficient cooling */
 };
 
+/* Argument to OPAL_CEC_REBOOT2() */
+enum {
+	OPAL_REBOOT_NORMAL		= 0,
+	OPAL_REBOOT_PLATFORM_ERROR	= 1,
+};
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* __OPAL_API_H */
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index a091c2701d94..48762b577988 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -44,6 +44,7 @@ int64_t opal_tpo_write(uint64_t token, uint32_t year_mon_day,
 		       uint32_t hour_min);
 int64_t opal_cec_power_down(uint64_t request);
 int64_t opal_cec_reboot(void);
+int64_t opal_cec_reboot2(uint32_t reboot_type, char *diag);
 int64_t opal_read_nvram(uint64_t buffer, uint64_t size, uint64_t offset);
 int64_t opal_write_nvram(uint64_t buffer, uint64_t size, uint64_t offset);
 int64_t opal_handle_interrupt(uint64_t isn, __be64 *outstanding_event_mask);
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index 88e433357371..6224176dab59 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -202,6 +202,7 @@ OPAL_CALL(opal_rtc_read,			OPAL_RTC_READ);
 OPAL_CALL(opal_rtc_write,			OPAL_RTC_WRITE);
 OPAL_CALL(opal_cec_power_down,			OPAL_CEC_POWER_DOWN);
 OPAL_CALL(opal_cec_reboot,			OPAL_CEC_REBOOT);
+OPAL_CALL(opal_cec_reboot2,			OPAL_CEC_REBOOT2);
 OPAL_CALL(opal_read_nvram,			OPAL_READ_NVRAM);
 OPAL_CALL(opal_write_nvram,			OPAL_WRITE_NVRAM);
 OPAL_CALL(opal_handle_interrupt,		OPAL_HANDLE_INTERRUPT);
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index f084afa0e3ba..a2b53f292427 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -441,6 +441,7 @@ static int opal_recover_mce(struct pt_regs *regs,
 int opal_machine_check(struct pt_regs *regs)
 {
 	struct machine_check_event evt;
+	int ret;
 
 	if (!get_mce_event(&evt, MCE_EVENT_RELEASE))
 		return 0;
@@ -455,6 +456,40 @@ int opal_machine_check(struct pt_regs *regs)
 
 	if (opal_recover_mce(regs, &evt))
 		return 1;
+
+	/*
+	 * Unrecovered machine check, we are heading to panic path.
+	 *
+	 * We may have hit this MCE in very early stage of kernel
+	 * initialization even before opal-prd has started running. If
+	 * this is the case then this MCE error may go un-noticed or
+	 * un-analyzed if we go down panic path. We need to inform
+	 * BMC/OCC about this error so that they can collect relevant
+	 * data for error analysis before rebooting.
+	 * Use opal_cec_reboot2(OPAL_REBOOT_PLATFORM_ERROR) to do so.
+	 * This function may not return on BMC based system.
+	 */
+	ret = opal_cec_reboot2(OPAL_REBOOT_PLATFORM_ERROR,
+			"Unrecoverable Machine Check exception");
+	if (ret == OPAL_UNSUPPORTED) {
+		pr_emerg("Reboot type %d not supported\n",
+					OPAL_REBOOT_PLATFORM_ERROR);
+	}
+
+	/*
+	 * We reached here. There can be three possibilities:
+	 * 1. We are running on a firmware level that do not support
+	 *    opal_cec_reboot2()
+	 * 2. We are running on a firmware level that do not support
+	 *    OPAL_REBOOT_PLATFORM_ERROR reboot type.
+	 * 3. We are running on FSP based system that does not need opal
+	 *    to trigger checkstop explicitly for error analysis. The FSP
+	 *    PRD component would have already got notified about this
+	 *    error through other channels.
+	 *
+	 * In any case, let us just fall through. We anyway heading
+	 * down to panic path.
+	 */
 	return 0;
 }
 

From 62521ea6db1045a746d4625f40ef6be8b74f126d Mon Sep 17 00:00:00 2001
From: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Date: Tue, 4 Aug 2015 16:48:56 +0530
Subject: [PATCH 042/140] powerpc/powernv: Invoke opal_cec_reboot2() on
 unrecoverable HMI.

Invoke new opal_cec_reboot2() call with reboot type
OPAL_REBOOT_PLATFORM_ERROR (for unrecoverable HMI interrupts) to inform
BMC/OCC about this error, so that BMC can collect relevant data for error
analysis and decide what component to de-configure before rebooting.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/platforms/powernv/opal-hmi.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/powerpc/platforms/powernv/opal-hmi.c b/arch/powerpc/platforms/powernv/opal-hmi.c
index acefdf9646f5..d000f4e21981 100644
--- a/arch/powerpc/platforms/powernv/opal-hmi.c
+++ b/arch/powerpc/platforms/powernv/opal-hmi.c
@@ -264,6 +264,8 @@ static void hmi_event_handler(struct work_struct *work)
 	spin_unlock_irqrestore(&opal_hmi_evt_lock, flags);
 
 	if (unrecoverable) {
+		int ret;
+
 		/* Pull all HMI events from OPAL before we panic. */
 		while (opal_get_msg(__pa(&msg), sizeof(msg)) == OPAL_SUCCESS) {
 			u32 type;
@@ -278,6 +280,23 @@ static void hmi_event_handler(struct work_struct *work)
 			hmi_evt = (struct OpalHMIEvent *)&msg.params[0];
 			print_hmi_event_info(hmi_evt);
 		}
+
+		/*
+		 * Unrecoverable HMI exception. We need to inform BMC/OCC
+		 * about this error so that it can collect relevant data
+		 * for error analysis before rebooting.
+		 */
+		ret = opal_cec_reboot2(OPAL_REBOOT_PLATFORM_ERROR,
+			"Unrecoverable HMI exception");
+		if (ret == OPAL_UNSUPPORTED) {
+			pr_emerg("Reboot type %d not supported\n",
+						OPAL_REBOOT_PLATFORM_ERROR);
+		}
+
+		/*
+		 * Fall through and panic if opal_cec_reboot2() returns
+		 * OPAL_UNSUPPORTED.
+		 */
 		panic("Unrecoverable HMI exception");
 	}
 }

From 368857c16c595eb7537cc0846708ddaa57a3a25b Mon Sep 17 00:00:00 2001
From: Daniel Axtens <dja@axtens.net>
Date: Wed, 29 Jul 2015 14:07:22 +1000
Subject: [PATCH 043/140] cxl: Don't ignore add_process_element() result when
 attaching context

Currently when attaching a context in dedicated mode, we ignore the
result of add_process_element(), which could potentially fail.

If add_process_element() returns an error, pass it back to the caller.

Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/native.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/misc/cxl/native.c b/drivers/misc/cxl/native.c
index fc9310dd2367..f74ff80266c8 100644
--- a/drivers/misc/cxl/native.c
+++ b/drivers/misc/cxl/native.c
@@ -492,9 +492,7 @@ static int attach_afu_directed(struct cxl_context *ctx, u64 wed, u64 amr)
 	if ((result = cxl_afu_check_and_enable(ctx->afu)))
 		return result;
 
-	add_process_element(ctx);
-
-	return 0;
+	return add_process_element(ctx);
 }
 
 static int deactivate_afu_directed(struct cxl_afu *afu)

From ae2a84b4074cff81957bae01bc1e0d50712f3dd3 Mon Sep 17 00:00:00 2001
From: Kevin Hao <haokexin@gmail.com>
Date: Fri, 12 Jun 2015 10:26:37 +0800
Subject: [PATCH 044/140] powerpc: pci: use %pR for printing struct resource

Use %pR to simplify the debug code. This also make the debug info more
readable.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
[mpe: Unsplit multi-line printk strings]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/pci-common.c | 72 ++++++++------------------------
 1 file changed, 18 insertions(+), 54 deletions(-)

diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index b9de34d44fcb..7587b2ae5f77 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -823,23 +823,15 @@ static void pcibios_fixup_resources(struct pci_dev *dev)
 		    (reg.start == 0 && !pci_has_flag(PCI_PROBE_ONLY))) {
 			/* Only print message if not re-assigning */
 			if (!pci_has_flag(PCI_REASSIGN_ALL_RSRC))
-				pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] "
-					 "is unassigned\n",
-					 pci_name(dev), i,
-					 (unsigned long long)res->start,
-					 (unsigned long long)res->end,
-					 (unsigned int)res->flags);
+				pr_debug("PCI:%s Resource %d %pR is unassigned\n",
+					 pci_name(dev), i, res);
 			res->end -= res->start;
 			res->start = 0;
 			res->flags |= IORESOURCE_UNSET;
 			continue;
 		}
 
-		pr_debug("PCI:%s Resource %d %016llx-%016llx [%x]\n",
-			 pci_name(dev), i,
-			 (unsigned long long)res->start,\
-			 (unsigned long long)res->end,
-			 (unsigned int)res->flags);
+		pr_debug("PCI:%s Resource %d %pR\n", pci_name(dev), i, res);
 	}
 
 	/* Call machine specific resource fixup */
@@ -943,11 +935,7 @@ static void pcibios_fixup_bridge(struct pci_bus *bus)
 			continue;
 		}
 
-		pr_debug("PCI:%s Bus rsrc %d %016llx-%016llx [%x]\n",
-			 pci_name(dev), i,
-			 (unsigned long long)res->start,\
-			 (unsigned long long)res->end,
-			 (unsigned int)res->flags);
+		pr_debug("PCI:%s Bus rsrc %d %pR\n", pci_name(dev), i, res);
 
 		/* Try to detect uninitialized P2P bridge resources,
 		 * and clear them out so they get re-assigned later
@@ -1132,10 +1120,8 @@ static int reparent_resources(struct resource *parent,
 	*pp = NULL;
 	for (p = res->child; p != NULL; p = p->sibling) {
 		p->parent = res;
-		pr_debug("PCI: Reparented %s [%llx..%llx] under %s\n",
-			 p->name,
-			 (unsigned long long)p->start,
-			 (unsigned long long)p->end, res->name);
+		pr_debug("PCI: Reparented %s %pR under %s\n",
+			 p->name, p, res->name);
 	}
 	return 0;
 }
@@ -1204,14 +1190,9 @@ static void pcibios_allocate_bus_resources(struct pci_bus *bus)
 			}
 		}
 
-		pr_debug("PCI: %s (bus %d) bridge rsrc %d: %016llx-%016llx "
-			 "[0x%x], parent %p (%s)\n",
-			 bus->self ? pci_name(bus->self) : "PHB",
-			 bus->number, i,
-			 (unsigned long long)res->start,
-			 (unsigned long long)res->end,
-			 (unsigned int)res->flags,
-			 pr, (pr && pr->name) ? pr->name : "nil");
+		pr_debug("PCI: %s (bus %d) bridge rsrc %d: %pR, parent %p (%s)\n",
+			 bus->self ? pci_name(bus->self) : "PHB", bus->number,
+			 i, res, pr, (pr && pr->name) ? pr->name : "nil");
 
 		if (pr && !(pr->flags & IORESOURCE_UNSET)) {
 			struct pci_dev *dev = bus->self;
@@ -1253,11 +1234,8 @@ static inline void alloc_resource(struct pci_dev *dev, int idx)
 {
 	struct resource *pr, *r = &dev->resource[idx];
 
-	pr_debug("PCI: Allocating %s: Resource %d: %016llx..%016llx [%x]\n",
-		 pci_name(dev), idx,
-		 (unsigned long long)r->start,
-		 (unsigned long long)r->end,
-		 (unsigned int)r->flags);
+	pr_debug("PCI: Allocating %s: Resource %d: %pR\n",
+		 pci_name(dev), idx, r);
 
 	pr = pci_find_parent_resource(dev, r);
 	if (!pr || (pr->flags & IORESOURCE_UNSET) ||
@@ -1265,11 +1243,7 @@ static inline void alloc_resource(struct pci_dev *dev, int idx)
 		printk(KERN_WARNING "PCI: Cannot allocate resource region %d"
 		       " of device %s, will remap\n", idx, pci_name(dev));
 		if (pr)
-			pr_debug("PCI:  parent is %p: %016llx-%016llx [%x]\n",
-				 pr,
-				 (unsigned long long)pr->start,
-				 (unsigned long long)pr->end,
-				 (unsigned int)pr->flags);
+			pr_debug("PCI:  parent is %p: %pR\n", pr, pr);
 		/* We'll assign a new address later */
 		r->flags |= IORESOURCE_UNSET;
 		r->end -= r->start;
@@ -1431,12 +1405,8 @@ void pcibios_claim_one_bus(struct pci_bus *bus)
 			if (r->parent || !r->start || !r->flags)
 				continue;
 
-			pr_debug("PCI: Claiming %s: "
-				 "Resource %d: %016llx..%016llx [%x]\n",
-				 pci_name(dev), i,
-				 (unsigned long long)r->start,
-				 (unsigned long long)r->end,
-				 (unsigned int)r->flags);
+			pr_debug("PCI: Claiming %s: Resource %d: %pR\n",
+				 pci_name(dev), i, r);
 
 			if (pci_claim_resource(dev, i) == 0)
 				continue;
@@ -1520,11 +1490,8 @@ static void pcibios_setup_phb_resources(struct pci_controller *hose,
 	} else {
 		offset = pcibios_io_space_offset(hose);
 
-		pr_debug("PCI: PHB IO resource    = %08llx-%08llx [%lx] off 0x%08llx\n",
-			 (unsigned long long)res->start,
-			 (unsigned long long)res->end,
-			 (unsigned long)res->flags,
-			 (unsigned long long)offset);
+		pr_debug("PCI: PHB IO resource    = %pR off 0x%08llx\n",
+			 res, (unsigned long long)offset);
 		pci_add_resource_offset(resources, res, offset);
 	}
 
@@ -1541,11 +1508,8 @@ static void pcibios_setup_phb_resources(struct pci_controller *hose,
 		offset = hose->mem_offset[i];
 
 
-		pr_debug("PCI: PHB MEM resource %d = %08llx-%08llx [%lx] off 0x%08llx\n", i,
-			 (unsigned long long)res->start,
-			 (unsigned long long)res->end,
-			 (unsigned long)res->flags,
-			 (unsigned long long)offset);
+		pr_debug("PCI: PHB MEM resource %d = %pR off 0x%08llx\n", i,
+			 res, (unsigned long long)offset);
 
 		pci_add_resource_offset(resources, res, offset);
 	}

From a825ac078b50266fb09168547752dd73c2fd4b4a Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 29 Jun 2015 14:30:39 -0700
Subject: [PATCH 045/140] powerpc: Remove redundant breaks

break; break; isn't useful.

Remove one.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/kvm.c | 1 -
 arch/powerpc/xmon/xmon.c  | 1 -
 2 files changed, 2 deletions(-)

diff --git a/arch/powerpc/kernel/kvm.c b/arch/powerpc/kernel/kvm.c
index 33aa4ddf597d..9ad37f827a97 100644
--- a/arch/powerpc/kernel/kvm.c
+++ b/arch/powerpc/kernel/kvm.c
@@ -649,7 +649,6 @@ static void kvm_check_ins(u32 *inst, u32 features)
 			kvm_patch_ins_mtsrin(inst, inst_rt, inst_rb);
 		}
 		break;
-		break;
 #endif
 	}
 
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index e599259d84fc..7a39f6cb8a3d 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -1987,7 +1987,6 @@ memex(void)
 			case '^':
 				adrs -= size;
 				break;
-				break;
 			case '/':
 				if (nslash > 0)
 					adrs -= 1 << nslash;

From fe2b592173ff0274e70dc44d1d28c19bb995aa7c Mon Sep 17 00:00:00 2001
From: Paul Bolle <pebolle@tiscali.nl>
Date: Fri, 31 Jul 2015 14:08:58 +0200
Subject: [PATCH 046/140] windfarm: decrement client count when unregistering

wf_unregister_client() increments the client count when a client
unregisters. That is obviously incorrect. Decrement that client count
instead.

Fixes: 75722d3992f5 ("[PATCH] ppc64: Thermal control for SMU based machines")

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/macintosh/windfarm_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/macintosh/windfarm_core.c b/drivers/macintosh/windfarm_core.c
index 3ee198b65843..cc7ece1712b5 100644
--- a/drivers/macintosh/windfarm_core.c
+++ b/drivers/macintosh/windfarm_core.c
@@ -435,7 +435,7 @@ int wf_unregister_client(struct notifier_block *nb)
 {
 	mutex_lock(&wf_lock);
 	blocking_notifier_chain_unregister(&wf_client_list, nb);
-	wf_client_count++;
+	wf_client_count--;
 	if (wf_client_count == 0)
 		wf_stop_thread();
 	mutex_unlock(&wf_lock);

From ca94bbab1a0336f34066f27c503767b8181db5b1 Mon Sep 17 00:00:00 2001
From: Paul Bolle <pebolle@tiscali.nl>
Date: Fri, 31 Jul 2015 14:12:20 +0200
Subject: [PATCH 047/140] windfarm: make wf_critical_overtemp() static

wf_critical_overtemp() is exported. But nothing uses that export.
That's unsurprising because there's no header that defines it. Stop
exporting that function and make it static.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/macintosh/windfarm_core.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/macintosh/windfarm_core.c b/drivers/macintosh/windfarm_core.c
index cc7ece1712b5..681e5b4d4b6a 100644
--- a/drivers/macintosh/windfarm_core.c
+++ b/drivers/macintosh/windfarm_core.c
@@ -72,7 +72,7 @@ static inline void wf_notify(int event, void *param)
 	blocking_notifier_call_chain(&wf_client_list, event, param);
 }
 
-int wf_critical_overtemp(void)
+static int wf_critical_overtemp(void)
 {
 	static char * critical_overtemp_path = "/sbin/critical_overtemp";
 	char *argv[] = { critical_overtemp_path, NULL };
@@ -84,7 +84,6 @@ int wf_critical_overtemp(void)
 	return call_usermodehelper(critical_overtemp_path,
 				   argv, envp, UMH_WAIT_EXEC);
 }
-EXPORT_SYMBOL_GPL(wf_critical_overtemp);
 
 static int wf_thread_func(void *data)
 {

From a368c29cf105485d2c34fb5d09d2dbe813e483e1 Mon Sep 17 00:00:00 2001
From: Paul Bolle <pebolle@tiscali.nl>
Date: Fri, 31 Jul 2015 14:14:20 +0200
Subject: [PATCH 048/140] windfarm: remove three exported but unused functions

wf_find_control(), wf_find_sensor(), and wf_is_overtemp() are exported
but unused. Remove these three functions.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/macintosh/windfarm.h      |  4 ---
 drivers/macintosh/windfarm_core.c | 42 -------------------------------
 2 files changed, 46 deletions(-)

diff --git a/drivers/macintosh/windfarm.h b/drivers/macintosh/windfarm.h
index 028cdac2d33d..901c42f71b5a 100644
--- a/drivers/macintosh/windfarm.h
+++ b/drivers/macintosh/windfarm.h
@@ -53,11 +53,9 @@ struct wf_control {
  * the kref and wf_unregister_control will decrement it, thus the
  * object creating/disposing a given control shouldn't assume it
  * still exists after wf_unregister_control has been called.
- * wf_find_control will inc the refcount for you
  */
 extern int wf_register_control(struct wf_control *ct);
 extern void wf_unregister_control(struct wf_control *ct);
-extern struct wf_control * wf_find_control(const char *name);
 extern int wf_get_control(struct wf_control *ct);
 extern void wf_put_control(struct wf_control *ct);
 
@@ -117,7 +115,6 @@ struct wf_sensor {
 /* Same lifetime rules as controls */
 extern int wf_register_sensor(struct wf_sensor *sr);
 extern void wf_unregister_sensor(struct wf_sensor *sr);
-extern struct wf_sensor * wf_find_sensor(const char *name);
 extern int wf_get_sensor(struct wf_sensor *sr);
 extern void wf_put_sensor(struct wf_sensor *sr);
 
@@ -144,7 +141,6 @@ extern int wf_unregister_client(struct notifier_block *nb);
 /* Overtemp conditions. Those are refcounted */
 extern void wf_set_overtemp(void);
 extern void wf_clear_overtemp(void);
-extern int wf_is_overtemp(void);
 
 #define WF_EVENT_NEW_CONTROL	0 /* param is wf_control * */
 #define WF_EVENT_NEW_SENSOR	1 /* param is wf_sensor * */
diff --git a/drivers/macintosh/windfarm_core.c b/drivers/macintosh/windfarm_core.c
index 681e5b4d4b6a..465d770ab0bb 100644
--- a/drivers/macintosh/windfarm_core.c
+++ b/drivers/macintosh/windfarm_core.c
@@ -254,24 +254,6 @@ void wf_unregister_control(struct wf_control *ct)
 }
 EXPORT_SYMBOL_GPL(wf_unregister_control);
 
-struct wf_control * wf_find_control(const char *name)
-{
-	struct wf_control *ct;
-
-	mutex_lock(&wf_lock);
-	list_for_each_entry(ct, &wf_controls, link) {
-		if (!strcmp(ct->name, name)) {
-			if (wf_get_control(ct))
-				ct = NULL;
-			mutex_unlock(&wf_lock);
-			return ct;
-		}
-	}
-	mutex_unlock(&wf_lock);
-	return NULL;
-}
-EXPORT_SYMBOL_GPL(wf_find_control);
-
 int wf_get_control(struct wf_control *ct)
 {
 	if (!try_module_get(ct->ops->owner))
@@ -367,24 +349,6 @@ void wf_unregister_sensor(struct wf_sensor *sr)
 }
 EXPORT_SYMBOL_GPL(wf_unregister_sensor);
 
-struct wf_sensor * wf_find_sensor(const char *name)
-{
-	struct wf_sensor *sr;
-
-	mutex_lock(&wf_lock);
-	list_for_each_entry(sr, &wf_sensors, link) {
-		if (!strcmp(sr->name, name)) {
-			if (wf_get_sensor(sr))
-				sr = NULL;
-			mutex_unlock(&wf_lock);
-			return sr;
-		}
-	}
-	mutex_unlock(&wf_lock);
-	return NULL;
-}
-EXPORT_SYMBOL_GPL(wf_find_sensor);
-
 int wf_get_sensor(struct wf_sensor *sr)
 {
 	if (!try_module_get(sr->ops->owner))
@@ -473,12 +437,6 @@ void wf_clear_overtemp(void)
 }
 EXPORT_SYMBOL_GPL(wf_clear_overtemp);
 
-int wf_is_overtemp(void)
-{
-	return (wf_overtemp != 0);
-}
-EXPORT_SYMBOL_GPL(wf_is_overtemp);
-
 static int __init windfarm_core_init(void)
 {
 	DBG("wf: core loaded\n");

From 35a7f41cc6bb7013e344502b03c5583d04228bd3 Mon Sep 17 00:00:00 2001
From: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Date: Thu, 16 Apr 2015 20:18:50 +0800
Subject: [PATCH 049/140] powerpc/4xx: Fix return value check in
 hsta_msi_probe()

In case of error, the functions platform_get_resource() and kmalloc()
returns NULL not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/sysdev/ppc4xx_hsta_msi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/sysdev/ppc4xx_hsta_msi.c b/arch/powerpc/sysdev/ppc4xx_hsta_msi.c
index 87f9623ca805..502f08cfce61 100644
--- a/arch/powerpc/sysdev/ppc4xx_hsta_msi.c
+++ b/arch/powerpc/sysdev/ppc4xx_hsta_msi.c
@@ -132,7 +132,7 @@ static int hsta_msi_probe(struct platform_device *pdev)
 	struct pci_controller *phb;
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (IS_ERR(mem)) {
+	if (!mem) {
 		dev_err(dev, "Unable to get mmio space\n");
 		return -EINVAL;
 	}
@@ -157,7 +157,7 @@ static int hsta_msi_probe(struct platform_device *pdev)
 		goto out;
 
 	ppc4xx_hsta_msi.irq_map = kmalloc(sizeof(int) * irq_count, GFP_KERNEL);
-	if (IS_ERR(ppc4xx_hsta_msi.irq_map)) {
+	if (!ppc4xx_hsta_msi.irq_map) {
 		ret = -ENOMEM;
 		goto out1;
 	}

From 197165d44925bd0fa892990851dee4d312a44b39 Mon Sep 17 00:00:00 2001
From: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Date: Fri, 24 Apr 2015 14:24:44 +0530
Subject: [PATCH 050/140] powerpc/ftrace: add powerpc timebase as a trace clock
 source

Add a new powerpc-specific trace clock using the timebase register,
similar to x86-tsc. This gives us
- a fast, monotonic, hardware clock source for trace entries, and
- a clock that can be used to correlate events across cpus as well as across
  hypervisor and guests.

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 Documentation/trace/ftrace.txt         |  5 +++++
 arch/powerpc/include/asm/Kbuild        |  1 -
 arch/powerpc/include/asm/trace_clock.h | 19 +++++++++++++++++++
 arch/powerpc/kernel/Makefile           |  1 +
 arch/powerpc/kernel/trace_clock.c      | 15 +++++++++++++++
 5 files changed, 40 insertions(+), 1 deletion(-)
 create mode 100644 arch/powerpc/include/asm/trace_clock.h
 create mode 100644 arch/powerpc/kernel/trace_clock.c

diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt
index 7ddb1e319f84..87bb4aa6a6b9 100644
--- a/Documentation/trace/ftrace.txt
+++ b/Documentation/trace/ftrace.txt
@@ -346,6 +346,11 @@ of ftrace. Here is a list of some of the key files:
 	  x86-tsc: Architectures may define their own clocks. For
 	  	   example, x86 uses its own TSC cycle clock here.
 
+	  ppc-tb: This uses the powerpc timebase register value.
+		  This is in sync across CPUs and can also be used
+		  to correlate events across hypervisor/guest if
+		  tb_offset is known.
+
 	To set a clock, simply echo the clock name into this file.
 
 	  echo global > trace_clock
diff --git a/arch/powerpc/include/asm/Kbuild b/arch/powerpc/include/asm/Kbuild
index 050712e1ce41..ab9f4e0ed4cf 100644
--- a/arch/powerpc/include/asm/Kbuild
+++ b/arch/powerpc/include/asm/Kbuild
@@ -6,5 +6,4 @@ generic-y += local64.h
 generic-y += mcs_spinlock.h
 generic-y += preempt.h
 generic-y += rwsem.h
-generic-y += trace_clock.h
 generic-y += vtime.h
diff --git a/arch/powerpc/include/asm/trace_clock.h b/arch/powerpc/include/asm/trace_clock.h
new file mode 100644
index 000000000000..cf1ee75ca069
--- /dev/null
+++ b/arch/powerpc/include/asm/trace_clock.h
@@ -0,0 +1,19 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * Copyright (C) 2015 Naveen N. Rao, IBM Corporation
+ */
+
+#ifndef _ASM_PPC_TRACE_CLOCK_H
+#define _ASM_PPC_TRACE_CLOCK_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+extern u64 notrace trace_clock_ppc_tb(void);
+
+#define ARCH_TRACE_CLOCKS { trace_clock_ppc_tb, "ppc-tb", 0 },
+
+#endif  /* _ASM_PPC_TRACE_CLOCK_H */
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 12868b1c4e05..ba336930d448 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -118,6 +118,7 @@ obj-$(CONFIG_PPC_IO_WORKAROUNDS)	+= io-workarounds.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
 obj-$(CONFIG_FTRACE_SYSCALLS)	+= ftrace.o
+obj-$(CONFIG_TRACING)		+= trace_clock.o
 
 ifneq ($(CONFIG_PPC_INDIRECT_PIO),y)
 obj-y				+= iomap.o
diff --git a/arch/powerpc/kernel/trace_clock.c b/arch/powerpc/kernel/trace_clock.c
new file mode 100644
index 000000000000..49170690946d
--- /dev/null
+++ b/arch/powerpc/kernel/trace_clock.c
@@ -0,0 +1,15 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * Copyright (C) 2015 Naveen N. Rao, IBM Corporation
+ */
+
+#include <asm/trace_clock.h>
+#include <asm/time.h>
+
+u64 notrace trace_clock_ppc_tb(void)
+{
+	return get_tb();
+}

From 7a2efb3a88b4d8ba5ab4ca5dacff22122ac51f28 Mon Sep 17 00:00:00 2001
From: Yangbo Lu <yangbo.lu@freescale.com>
Date: Wed, 6 May 2015 14:29:08 +0800
Subject: [PATCH 051/140] powerpc/corenet: enable eSDHC

Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/configs/corenet32_smp_defconfig | 2 ++
 arch/powerpc/configs/corenet64_smp_defconfig | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig
index 37659937bd12..9c02d9109e64 100644
--- a/arch/powerpc/configs/corenet32_smp_defconfig
+++ b/arch/powerpc/configs/corenet32_smp_defconfig
@@ -135,6 +135,8 @@ CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_ESDHC=y
 CONFIG_EDAC=y
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_MPC85XX=y
diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig
index 33cd1df818ad..bef93964a007 100644
--- a/arch/powerpc/configs/corenet64_smp_defconfig
+++ b/arch/powerpc/configs/corenet64_smp_defconfig
@@ -125,6 +125,8 @@ CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_ESDHC=y
 CONFIG_EDAC=y
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_RTC_CLASS=y

From f728b8b7d0d18142fd7591b566aae2352e433d7e Mon Sep 17 00:00:00 2001
From: Yao Yuan <yao.yuan@freescale.com>
Date: Thu, 23 Jul 2015 11:00:46 +0800
Subject: [PATCH 052/140] powerpc/corenet32: enable DMA in defconfig

By default we enable DMA(CONFIG_FSL_DMA) support
which are needed on P2041RDB, P3041DS, P4080DS,
B4860QDS, etc.

Signed-off-by: Yuan Yao <yao.yuan@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/configs/corenet32_smp_defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig
index 9c02d9109e64..fad88a191202 100644
--- a/arch/powerpc/configs/corenet32_smp_defconfig
+++ b/arch/powerpc/configs/corenet32_smp_defconfig
@@ -145,6 +145,8 @@ CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_DS1374=y
 CONFIG_RTC_DRV_DS3232=y
 CONFIG_UIO=y
+CONFIG_DMADEVICES=y
+CONFIG_FSL_DMA=y
 CONFIG_VIRT_DRIVERS=y
 CONFIG_FSL_HV_MANAGER=y
 CONFIG_STAGING=y

From ecc7456880e0ae393ecee85127c71fc508bce74c Mon Sep 17 00:00:00 2001
From: Michael Ellerman <mpe@ellerman.id.au>
Date: Thu, 23 Jul 2015 16:22:53 +1000
Subject: [PATCH 053/140] powerpc: Update corenet32_smp_defconfig for modern
 distros

corenet32_smp_defconfig is missing some things that modern distros
require, enable them.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/configs/corenet32_smp_defconfig | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig
index fad88a191202..e47c1ff4caa6 100644
--- a/arch/powerpc/configs/corenet32_smp_defconfig
+++ b/arch/powerpc/configs/corenet32_smp_defconfig
@@ -2,6 +2,7 @@ CONFIG_PPC_85xx=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=8
 CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_AUDIT=y
 CONFIG_NO_HZ=y
@@ -10,6 +11,10 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_SCHED=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
@@ -176,6 +181,7 @@ CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=m
 CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_FS=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_HUNG_TASK=y

From 7e2ad2ef851545c9bd0b5aadc8026c6901a87c50 Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Thu, 30 Jul 2015 18:08:56 -0500
Subject: [PATCH 054/140] powerpc/85xx: Make defconfigs consistent

The mpc85xx and corenet configs have many differences between them that
can't be explained by the target hardware of each config.  The next
patch will consolidate these targets using kconfig fragments; this
patch shows what the resulting defconfigs will look like (generated by
using savedefconfig on a fragment-generated config).

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/configs/corenet32_smp_defconfig | 97 +++++++++++++++++---
 arch/powerpc/configs/corenet64_smp_defconfig | 97 ++++++++++++++++++--
 arch/powerpc/configs/mpc85xx_defconfig       | 40 +++++++-
 arch/powerpc/configs/mpc85xx_smp_defconfig   | 59 ++++++++++--
 4 files changed, 262 insertions(+), 31 deletions(-)

diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig
index e47c1ff4caa6..c05f8b778c69 100644
--- a/arch/powerpc/configs/corenet32_smp_defconfig
+++ b/arch/powerpc/configs/corenet32_smp_defconfig
@@ -1,10 +1,11 @@
 CONFIG_PPC_85xx=y
 CONFIG_SMP=y
-CONFIG_NR_CPUS=8
+CONFIG_NR_CPUS=24
 CONFIG_SYSVIPC=y
-CONFIG_FHANDLE=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
 CONFIG_AUDIT=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BSD_PROCESS_ACCT=y
@@ -16,10 +17,9 @@ CONFIG_CPUSETS=y
 CONFIG_CGROUP_CPUACCT=y
 CONFIG_CGROUP_SCHED=y
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
@@ -27,7 +27,10 @@ CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_MAC_PARTITION=y
+CONFIG_C293_PCIE=y
 CONFIG_CORENET_GENERIC=y
+CONFIG_QUICC_ENGINE=y
+CONFIG_QE_GPIO=y
 CONFIG_HIGHMEM=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_MISC=m
@@ -64,6 +67,7 @@ CONFIG_IP_PIMSM_V2=y
 CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
 CONFIG_INET_IPCOMP=y
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
@@ -73,20 +77,29 @@ CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
+CONFIG_FTL=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_NAND_FSL_IFC=y
 CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_LEGACY=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SYM53C8XX_2=y
@@ -95,17 +108,27 @@ CONFIG_SATA_AHCI=y
 CONFIG_SATA_FSL=y
 CONFIG_SATA_SIL24=y
 CONFIG_SATA_SIL=y
+CONFIG_PATA_ALI=y
 CONFIG_PATA_SIL680=y
+CONFIG_PATA_VIA=y
 CONFIG_NETDEVICES=y
-CONFIG_FSL_PQ_MDIO=y
+CONFIG_DUMMY=y
 CONFIG_FSL_XGMAC_MDIO=y
+CONFIG_UCC_GETH=y
+CONFIG_GIANFAR=y
 CONFIG_E1000=y
 CONFIG_E1000E=y
+CONFIG_IGB=y
 CONFIG_AT803X_PHY=y
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_CICADA_PHY=y
 CONFIG_VITESSE_PHY=y
+CONFIG_BROADCOM_PHY=y
 CONFIG_FIXED_PHY=y
 CONFIG_MDIO_BUS_MUX_GPIO=y
 CONFIG_MDIO_BUS_MUX_MMIOREG=y
+CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
@@ -114,21 +137,51 @@ CONFIG_SERIO_LIBPS2=y
 CONFIG_PPC_EPAPR_HV_BYTECHAN=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=6
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_QE=m
 CONFIG_NVRAM=y
-CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MPC=y
 CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MPC=y
 CONFIG_SPI=y
 CONFIG_SPI_GPIO=y
 CONFIG_SPI_FSL_SPI=y
 CONFIG_SPI_FSL_ESPI=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_INA2XX=y
+CONFIG_FB=y
+CONFIG_FB_FSL_DIU=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_INTEL8X0=y
+# CONFIG_SND_PPC is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_POWERPC_SOC=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SUNPLUS=y
 CONFIG_USB_HID=m
 CONFIG_USB=y
 CONFIG_USB_MON=y
@@ -149,14 +202,14 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_DS1374=y
 CONFIG_RTC_DRV_DS3232=y
-CONFIG_UIO=y
+CONFIG_RTC_DRV_CMOS=y
 CONFIG_DMADEVICES=y
 CONFIG_FSL_DMA=y
+CONFIG_UIO=y
 CONFIG_VIRT_DRIVERS=y
 CONFIG_FSL_HV_MANAGER=y
-CONFIG_STAGING=y
-CONFIG_FSL_CORENET_CF=y
 CONFIG_CLK_QORIQ=y
+CONFIG_FSL_CORENET_CF=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
@@ -170,18 +223,34 @@ CONFIG_NTFS_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
+CONFIG_ADFS_FS=m
+CONFIG_AFFS_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
 CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=1
+CONFIG_UBIFS_FS=y
 CONFIG_CRAMFS=y
+CONFIG_VXFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
 CONFIG_NFS_FS=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
+CONFIG_NFSD=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=m
+CONFIG_CRC_T10DIF=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
 CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_HUNG_TASK=y
@@ -191,5 +260,5 @@ CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_DEV_FSL_CAAM=y
+CONFIG_CRYPTO_DEV_TALITOS=y
diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig
index bef93964a007..b35ee9cd49d8 100644
--- a/arch/powerpc/configs/corenet64_smp_defconfig
+++ b/arch/powerpc/configs/corenet64_smp_defconfig
@@ -4,7 +4,9 @@ CONFIG_ALTIVEC=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=24
 CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
 CONFIG_FHANDLE=y
+CONFIG_AUDIT=y
 CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -19,6 +21,7 @@ CONFIG_CGROUP_SCHED=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_PERF_EVENTS=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
@@ -28,10 +31,12 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_MAC_PARTITION=y
 CONFIG_CORENET_GENERIC=y
 # CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
 CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED=y
 CONFIG_PCIEPORTBUS=y
+# CONFIG_PCIEASPM is not set
 CONFIG_PCI_MSI=y
 CONFIG_RAPIDIO=y
 CONFIG_FSL_RIO=y
@@ -39,7 +44,10 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_XFRM_USER=y
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_STATISTICS=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
@@ -54,7 +62,9 @@ CONFIG_NET_IPIP=y
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
+CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 CONFIG_IPV6=y
@@ -69,29 +79,49 @@ CONFIG_FTL=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_NAND_FSL_IFC=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_LEGACY=y
 CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
 CONFIG_SATA_FSL=y
 CONFIG_SATA_SIL24=y
+CONFIG_SATA_SIL=y
+CONFIG_PATA_ALI=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_VIA=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_FSL_XGMAC_MDIO=y
+CONFIG_GIANFAR=y
+CONFIG_E1000=y
 CONFIG_E1000E=y
+CONFIG_IGB=y
+CONFIG_AT803X_PHY=y
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_CICADA_PHY=y
 CONFIG_VITESSE_PHY=y
+CONFIG_BROADCOM_PHY=y
 CONFIG_FIXED_PHY=y
 CONFIG_MDIO_BUS_MUX_GPIO=y
 CONFIG_MDIO_BUS_MUX_MMIOREG=y
@@ -100,28 +130,61 @@ CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_SERIO_LIBPS2=y
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_PPC_EPAPR_HV_BYTECHAN=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=6
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MPC=y
 CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MPC=y
 CONFIG_SPI=y
 CONFIG_SPI_GPIO=y
 CONFIG_SPI_FSL_SPI=y
 CONFIG_SPI_FSL_ESPI=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_INA2XX=y
+CONFIG_FB=y
+CONFIG_FB_FSL_DIU=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_INTEL8X0=y
+# CONFIG_SND_PPC is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_POWERPC_SOC=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SUNPLUS=y
 CONFIG_USB_HID=m
 CONFIG_USB=y
 CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
@@ -129,18 +192,22 @@ CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_OF_ESDHC=y
 CONFIG_EDAC=y
 CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_MPC85XX=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_DS1374=y
 CONFIG_RTC_DRV_DS3232=y
+CONFIG_RTC_DRV_CMOS=y
 CONFIG_DMADEVICES=y
 CONFIG_FSL_DMA=y
+CONFIG_UIO=y
 CONFIG_VIRT_DRIVERS=y
 CONFIG_FSL_HV_MANAGER=y
 CONFIG_CLK_QORIQ=y
 CONFIG_FSL_CORENET_CF=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
@@ -148,31 +215,45 @@ CONFIG_UDF_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
-CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
+CONFIG_ADFS_FS=m
+CONFIG_AFFS_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=1
 CONFIG_UBIFS_FS=y
+CONFIG_CRAMFS=y
+CONFIG_VXFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
 CONFIG_NFS_FS=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
+CONFIG_NFSD=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=m
 CONFIG_CRC_T10DIF=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
 CONFIG_DEBUG_INFO=y
 CONFIG_FRAME_WARN=1024
-CONFIG_DEBUG_FS=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_HUNG_TASK=y
+CONFIG_RCU_TRACE=y
 CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_DEV_FSL_CAAM=y
+CONFIG_CRYPTO_DEV_TALITOS=y
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 6ecf7bdbc2f9..f551fb43cab8 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -2,6 +2,7 @@ CONFIG_PPC_85xx=y
 CONFIG_PHYS_64BIT=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
 CONFIG_AUDIT=y
 CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ=y
@@ -10,9 +11,14 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_SCHED=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_PERF_EVENTS=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
@@ -46,19 +52,25 @@ CONFIG_MVME2500=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
 CONFIG_HIGHMEM=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
-CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_KEXEC=y
+CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_PCI=y
 CONFIG_PCIEPORTBUS=y
 # CONFIG_PCIEASPM is not set
 CONFIG_PCI_MSI=y
 CONFIG_RAPIDIO=y
+CONFIG_FSL_RIO=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_XFRM_USER=y
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_STATISTICS=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
@@ -73,7 +85,9 @@ CONFIG_NET_IPIP=y
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
+CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 CONFIG_IPV6=y
@@ -106,17 +120,22 @@ CONFIG_EEPROM_LEGACY=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_FSL=y
 CONFIG_SATA_SIL24=y
+CONFIG_SATA_SIL=y
 CONFIG_PATA_ALI=y
+CONFIG_PATA_SIL680=y
 CONFIG_PATA_VIA=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
 CONFIG_FS_ENET=y
+CONFIG_FSL_XGMAC_MDIO=y
 CONFIG_UCC_GETH=y
 CONFIG_GIANFAR=y
 CONFIG_E1000=y
@@ -129,11 +148,15 @@ CONFIG_CICADA_PHY=y
 CONFIG_VITESSE_PHY=y
 CONFIG_BROADCOM_PHY=y
 CONFIG_FIXED_PHY=y
+CONFIG_MDIO_BUS_MUX_GPIO=y
+CONFIG_MDIO_BUS_MUX_MMIOREG=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_SERIO_LIBPS2=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_PPC_EPAPR_HV_BYTECHAN=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=6
@@ -144,13 +167,17 @@ CONFIG_SERIAL_8250_RSA=y
 CONFIG_SERIAL_QE=m
 CONFIG_NVRAM=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
 CONFIG_I2C_CPM=m
 CONFIG_I2C_MPC=y
 CONFIG_SPI=y
+CONFIG_SPI_GPIO=y
 CONFIG_SPI_FSL_SPI=y
 CONFIG_SPI_FSL_ESPI=y
 CONFIG_GPIO_MPC8XXX=y
 CONFIG_SENSORS_LM90=y
+CONFIG_SENSORS_INA2XX=y
 CONFIG_FB=y
 CONFIG_FB_FSL_DIU=y
 # CONFIG_VGA_CONSOLE is not set
@@ -179,6 +206,7 @@ CONFIG_HID_PANTHERLORD=y
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SUNPLUS=y
+CONFIG_USB_HID=m
 CONFIG_USB=y
 CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
@@ -201,6 +229,10 @@ CONFIG_RTC_DRV_DS3232=y
 CONFIG_RTC_DRV_CMOS=y
 CONFIG_DMADEVICES=y
 CONFIG_FSL_DMA=y
+CONFIG_UIO=y
+CONFIG_VIRT_DRIVERS=y
+CONFIG_FSL_HV_MANAGER=y
+CONFIG_FSL_CORENET_CF=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
@@ -243,10 +275,14 @@ CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_HUNG_TASK=y
+CONFIG_RCU_TRACE=y
+CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_DEV_FSL_CAAM=y
 CONFIG_CRYPTO_DEV_TALITOS=y
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index b6c7111ea913..237b3e4ee24f 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -1,9 +1,10 @@
 CONFIG_PPC_85xx=y
 CONFIG_PHYS_64BIT=y
 CONFIG_SMP=y
-CONFIG_NR_CPUS=8
+CONFIG_NR_CPUS=24
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
 CONFIG_AUDIT=y
 CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ=y
@@ -12,9 +13,14 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_SCHED=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_PERF_EVENTS=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
@@ -44,20 +50,29 @@ CONFIG_TQM8548=y
 CONFIG_TQM8555=y
 CONFIG_TQM8560=y
 CONFIG_SBC8548=y
+CONFIG_MVME2500=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
 CONFIG_HIGHMEM=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
-CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_KEXEC=y
+CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+# CONFIG_PCIEASPM is not set
 CONFIG_PCI_MSI=y
 CONFIG_RAPIDIO=y
+CONFIG_FSL_RIO=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_XFRM_USER=y
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_STATISTICS=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
@@ -72,7 +87,9 @@ CONFIG_NET_IPIP=y
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
+CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 CONFIG_IPV6=y
@@ -87,7 +104,10 @@ CONFIG_FTL=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_NAND_FSL_IFC=y
@@ -102,48 +122,64 @@ CONFIG_EEPROM_LEGACY=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_FSL=y
 CONFIG_SATA_SIL24=y
+CONFIG_SATA_SIL=y
 CONFIG_PATA_ALI=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_VIA=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
 CONFIG_FS_ENET=y
+CONFIG_FSL_XGMAC_MDIO=y
 CONFIG_UCC_GETH=y
 CONFIG_GIANFAR=y
+CONFIG_E1000=y
 CONFIG_E1000E=y
+CONFIG_IGB=y
 CONFIG_AT803X_PHY=y
 CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_CICADA_PHY=y
 CONFIG_VITESSE_PHY=y
+CONFIG_BROADCOM_PHY=y
 CONFIG_FIXED_PHY=y
+CONFIG_MDIO_BUS_MUX_GPIO=y
+CONFIG_MDIO_BUS_MUX_MMIOREG=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_SERIO_LIBPS2=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_PPC_EPAPR_HV_BYTECHAN=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=6
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
 CONFIG_SERIAL_QE=m
 CONFIG_NVRAM=y
-CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
 CONFIG_I2C_CPM=m
 CONFIG_I2C_MPC=y
 CONFIG_SPI=y
+CONFIG_SPI_GPIO=y
 CONFIG_SPI_FSL_SPI=y
 CONFIG_SPI_FSL_ESPI=y
 CONFIG_GPIO_MPC8XXX=y
 CONFIG_SENSORS_LM90=y
+CONFIG_SENSORS_INA2XX=y
 CONFIG_FB=y
 CONFIG_FB_FSL_DIU=y
 # CONFIG_VGA_CONSOLE is not set
@@ -172,6 +208,7 @@ CONFIG_HID_PANTHERLORD=y
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SUNPLUS=y
+CONFIG_USB_HID=m
 CONFIG_USB=y
 CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
@@ -186,6 +223,7 @@ CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_OF_ESDHC=y
 CONFIG_EDAC=y
 CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_MPC85XX=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_DS1374=y
@@ -193,6 +231,10 @@ CONFIG_RTC_DRV_DS3232=y
 CONFIG_RTC_DRV_CMOS=y
 CONFIG_DMADEVICES=y
 CONFIG_FSL_DMA=y
+CONFIG_UIO=y
+CONFIG_VIRT_DRIVERS=y
+CONFIG_FSL_HV_MANAGER=y
+CONFIG_FSL_CORENET_CF=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
@@ -234,11 +276,14 @@ CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_HUNG_TASK=y
+CONFIG_RCU_TRACE=y
+CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_DEV_FSL_CAAM=y
 CONFIG_CRYPTO_DEV_TALITOS=y

From 44d5401425db90dc46a0ca000bdc41429768d351 Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Wed, 29 Jul 2015 18:14:04 -0500
Subject: [PATCH 055/140] powerpc/85xx: Use kconfig fragments

Unify mpc85xx and corenet configs using fragments, to ease maintenance
and avoid the sort of drift that the previous patch fixed.

Hardware and software options are separated, with the hope that other
embedded platforms could share the software options, and to make it
easier to maintain custom/alternate configs that focus on either
hardware or software options.

Due to the previous patch, this patch should not affect the results of
any of the affected defconfigs -- only how those results are achieved.
The resulting config is more or less the union of the options that any
of the configs previously selected.  No attempt was made in this (or
the previous) patch to edit out questionable options, but this patch
will make it easier to do so in future patches.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/Makefile                         |  20 +
 arch/powerpc/configs/85xx-32bit.config        |   5 +
 arch/powerpc/configs/85xx-64bit.config        |   4 +
 ...corenet32_smp_defconfig => 85xx-hw.config} | 354 ++++++------------
 arch/powerpc/configs/85xx-smp.config          |   2 +
 arch/powerpc/configs/altivec.config           |   1 +
 arch/powerpc/configs/corenet64_smp_defconfig  | 259 -------------
 arch/powerpc/configs/corenet_basic_defconfig  |   1 +
 arch/powerpc/configs/fsl-emb-nonhw.config     | 126 +++++++
 arch/powerpc/configs/mpc85xx_basic_defconfig  |  23 ++
 arch/powerpc/configs/mpc85xx_defconfig        | 288 --------------
 arch/powerpc/configs/mpc85xx_smp_defconfig    | 289 --------------
 12 files changed, 297 insertions(+), 1075 deletions(-)
 create mode 100644 arch/powerpc/configs/85xx-32bit.config
 create mode 100644 arch/powerpc/configs/85xx-64bit.config
 rename arch/powerpc/configs/{corenet32_smp_defconfig => 85xx-hw.config} (52%)
 create mode 100644 arch/powerpc/configs/85xx-smp.config
 create mode 100644 arch/powerpc/configs/altivec.config
 delete mode 100644 arch/powerpc/configs/corenet64_smp_defconfig
 create mode 100644 arch/powerpc/configs/corenet_basic_defconfig
 create mode 100644 arch/powerpc/configs/fsl-emb-nonhw.config
 create mode 100644 arch/powerpc/configs/mpc85xx_basic_defconfig
 delete mode 100644 arch/powerpc/configs/mpc85xx_defconfig
 delete mode 100644 arch/powerpc/configs/mpc85xx_smp_defconfig

diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 05f464eb6952..4ca54fdd8768 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -288,6 +288,26 @@ PHONY += pseries_le_defconfig
 pseries_le_defconfig:
 	$(call merge_into_defconfig,pseries_defconfig,le)
 
+PHONY += mpc85xx_defconfig
+mpc85xx_defconfig:
+	$(call merge_into_defconfig,mpc85xx_basic_defconfig,\
+		85xx-32bit 85xx-hw fsl-emb-nonhw)
+
+PHONY += mpc85xx_smp_defconfig
+mpc85xx_smp_defconfig:
+	$(call merge_into_defconfig,mpc85xx_basic_defconfig,\
+		85xx-32bit 85xx-smp 85xx-hw fsl-emb-nonhw)
+
+PHONY += corenet32_smp_defconfig
+corenet32_smp_defconfig:
+	$(call merge_into_defconfig,corenet_basic_defconfig,\
+		85xx-32bit 85xx-smp 85xx-hw fsl-emb-nonhw)
+
+PHONY += corenet64_smp_defconfig
+corenet64_smp_defconfig:
+	$(call merge_into_defconfig,corenet_basic_defconfig,\
+		85xx-64bit 85xx-smp altivec 85xx-hw fsl-emb-nonhw)
+
 define archhelp
   @echo '* zImage          - Build default images selected by kernel config'
   @echo '  zImage.*        - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)'
diff --git a/arch/powerpc/configs/85xx-32bit.config b/arch/powerpc/configs/85xx-32bit.config
new file mode 100644
index 000000000000..6b8894d727a2
--- /dev/null
+++ b/arch/powerpc/configs/85xx-32bit.config
@@ -0,0 +1,5 @@
+CONFIG_HIGHMEM=y
+CONFIG_KEXEC=y
+CONFIG_PPC_85xx=y
+CONFIG_PROC_KCORE=y
+CONFIG_PHYS_64BIT=y
diff --git a/arch/powerpc/configs/85xx-64bit.config b/arch/powerpc/configs/85xx-64bit.config
new file mode 100644
index 000000000000..4aba81222885
--- /dev/null
+++ b/arch/powerpc/configs/85xx-64bit.config
@@ -0,0 +1,4 @@
+CONFIG_MATH_EMULATION=y
+CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED=y
+CONFIG_PPC64=y
+CONFIG_PPC_BOOK3E_64=y
diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/85xx-hw.config
similarity index 52%
rename from arch/powerpc/configs/corenet32_smp_defconfig
rename to arch/powerpc/configs/85xx-hw.config
index c05f8b778c69..fa84e8883d09 100644
--- a/arch/powerpc/configs/corenet32_smp_defconfig
+++ b/arch/powerpc/configs/85xx-hw.config
@@ -1,172 +1,35 @@
-CONFIG_PPC_85xx=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=24
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
-CONFIG_AUDIT=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_CPUSETS=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_PERF_EVENTS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
+CONFIG_AT803X_PHY=y
+CONFIG_ATA=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BROADCOM_PHY=y
 CONFIG_C293_PCIE=y
-CONFIG_CORENET_GENERIC=y
-CONFIG_QUICC_ENGINE=y
-CONFIG_QE_GPIO=y
-CONFIG_HIGHMEM=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_KEXEC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-# CONFIG_PCIEASPM is not set
-CONFIG_PCI_MSI=y
-CONFIG_RAPIDIO=y
-CONFIG_FSL_RIO=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_XFRM_SUB_POLICY=y
-CONFIG_XFRM_STATISTICS=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_INET_AH=y
-CONFIG_INET_ESP=y
-CONFIG_INET_IPCOMP=y
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
-CONFIG_IP_SCTP=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_FTL=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_FSL_ELBC=y
-CONFIG_MTD_NAND_FSL_IFC=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_CICADA_PHY=y
+CONFIG_CLK_QORIQ=y
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
+CONFIG_CRYPTO_DEV_TALITOS=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_DMADEVICES=y
+CONFIG_E1000E=y
+CONFIG_E1000=y
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_MPC85XX=y
+CONFIG_EDAC=y
 CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_LEGACY=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_FSL=y
-CONFIG_SATA_SIL24=y
-CONFIG_SATA_SIL=y
-CONFIG_PATA_ALI=y
-CONFIG_PATA_SIL680=y
-CONFIG_PATA_VIA=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_FSL_XGMAC_MDIO=y
-CONFIG_UCC_GETH=y
-CONFIG_GIANFAR=y
-CONFIG_E1000=y
-CONFIG_E1000E=y
-CONFIG_IGB=y
-CONFIG_AT803X_PHY=y
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_FIXED_PHY=y
-CONFIG_MDIO_BUS_MUX_GPIO=y
-CONFIG_MDIO_BUS_MUX_MMIOREG=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_PPC_EPAPR_HV_BYTECHAN=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=6
-CONFIG_SERIAL_8250_RUNTIME_UARTS=6
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_SERIAL_QE=m
-CONFIG_NVRAM=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_I2C_MPC=y
-CONFIG_SPI=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_FSL_SPI=y
-CONFIG_SPI_FSL_ESPI=y
-CONFIG_SENSORS_LM90=y
-CONFIG_SENSORS_INA2XX=y
-CONFIG_FB=y
 CONFIG_FB_FSL_DIU=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_DRIVERS is not set
-CONFIG_SND_INTEL8X0=y
-# CONFIG_SND_PPC is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_POWERPC_SOC=y
+CONFIG_FS_ENET=y
+CONFIG_FSL_CORENET_CF=y
+CONFIG_FSL_DMA=y
+CONFIG_FSL_HV_MANAGER=y
+CONFIG_FSL_PQ_MDIO=y
+CONFIG_FSL_RIO=y
+CONFIG_FSL_XGMAC_MDIO=y
+CONFIG_GIANFAR=y
+CONFIG_GPIO_MPC8XXX=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -182,83 +45,96 @@ CONFIG_HID_PANTHERLORD=y
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SUNPLUS=y
-CONFIG_USB_HID=m
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_CPM=m
+CONFIG_I2C_MPC=y
+CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C=y
+CONFIG_IGB=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_MDIO_BUS_MUX_GPIO=y
+CONFIG_MDIO_BUS_MUX_MMIOREG=y
 CONFIG_MMC_SDHCI_OF_ESDHC=y
-CONFIG_EDAC=y
-CONFIG_EDAC_MM_EDAC=y
-CONFIG_EDAC_MPC85XX=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND_FSL_ELBC=y
+CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_NETDEVICES=y
+CONFIG_NVRAM=y
+CONFIG_PATA_ALI=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_VIA=y
+# CONFIG_PCIEASPM is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI=y
+CONFIG_PPC_EPAPR_HV_BYTECHAN=y
+# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
+CONFIG_QE_GPIO=y
+CONFIG_QUICC_ENGINE=y
+CONFIG_RAPIDIO=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_CMOS=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_DS1374=y
 CONFIG_RTC_DRV_DS3232=y
-CONFIG_RTC_DRV_CMOS=y
-CONFIG_DMADEVICES=y
-CONFIG_FSL_DMA=y
-CONFIG_UIO=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_FSL=y
+CONFIG_SATA_SIL24=y
+CONFIG_SATA_SIL=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SENSORS_INA2XX=y
+CONFIG_SENSORS_LM90=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_8250_RUNTIME_UARTS=6
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_QE=m
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_INTEL8X0=y
+CONFIG_SND_POWERPC_SOC=y
+# CONFIG_SND_PPC is not set
+CONFIG_SND_SOC=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND=y
+CONFIG_SOUND=y
+CONFIG_SPI_FSL_ESPI=y
+CONFIG_SPI_FSL_SPI=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI=y
+CONFIG_UCC_GETH=y
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_HID=m
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB=y
+# CONFIG_VGA_CONSOLE is not set
 CONFIG_VIRT_DRIVERS=y
-CONFIG_FSL_HV_MANAGER=y
-CONFIG_CLK_QORIQ=y
-CONFIG_FSL_CORENET_CF=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_ADFS_FS=m
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_UBIFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_VXFS_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_CRC_T10DIF=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_DEBUG_INFO=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_RCU_TRACE=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_DEV_FSL_CAAM=y
-CONFIG_CRYPTO_DEV_TALITOS=y
+CONFIG_VITESSE_PHY=y
diff --git a/arch/powerpc/configs/85xx-smp.config b/arch/powerpc/configs/85xx-smp.config
new file mode 100644
index 000000000000..3b4d1e54636d
--- /dev/null
+++ b/arch/powerpc/configs/85xx-smp.config
@@ -0,0 +1,2 @@
+CONFIG_NR_CPUS=24
+CONFIG_SMP=y
diff --git a/arch/powerpc/configs/altivec.config b/arch/powerpc/configs/altivec.config
new file mode 100644
index 000000000000..58a697cb5a62
--- /dev/null
+++ b/arch/powerpc/configs/altivec.config
@@ -0,0 +1 @@
+CONFIG_ALTIVEC=y
diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig
deleted file mode 100644
index b35ee9cd49d8..000000000000
--- a/arch/powerpc/configs/corenet64_smp_defconfig
+++ /dev/null
@@ -1,259 +0,0 @@
-CONFIG_PPC64=y
-CONFIG_PPC_BOOK3E_64=y
-CONFIG_ALTIVEC=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=24
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
-CONFIG_AUDIT=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_CPUSETS=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_PERF_EVENTS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_CORENET_GENERIC=y
-# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_MATH_EMULATION=y
-CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED=y
-CONFIG_PCIEPORTBUS=y
-# CONFIG_PCIEASPM is not set
-CONFIG_PCI_MSI=y
-CONFIG_RAPIDIO=y
-CONFIG_FSL_RIO=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_XFRM_SUB_POLICY=y
-CONFIG_XFRM_STATISTICS=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_INET_AH=y
-CONFIG_INET_ESP=y
-CONFIG_INET_IPCOMP=y
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
-CONFIG_IP_SCTP=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_FTL=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_FSL_ELBC=y
-CONFIG_MTD_NAND_FSL_IFC=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_LEGACY=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_FSL=y
-CONFIG_SATA_SIL24=y
-CONFIG_SATA_SIL=y
-CONFIG_PATA_ALI=y
-CONFIG_PATA_SIL680=y
-CONFIG_PATA_VIA=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_FSL_XGMAC_MDIO=y
-CONFIG_GIANFAR=y
-CONFIG_E1000=y
-CONFIG_E1000E=y
-CONFIG_IGB=y
-CONFIG_AT803X_PHY=y
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_FIXED_PHY=y
-CONFIG_MDIO_BUS_MUX_GPIO=y
-CONFIG_MDIO_BUS_MUX_MMIOREG=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_PPC_EPAPR_HV_BYTECHAN=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=6
-CONFIG_SERIAL_8250_RUNTIME_UARTS=6
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_I2C_MPC=y
-CONFIG_SPI=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_FSL_SPI=y
-CONFIG_SPI_FSL_ESPI=y
-CONFIG_SENSORS_LM90=y
-CONFIG_SENSORS_INA2XX=y
-CONFIG_FB=y
-CONFIG_FB_FSL_DIU=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_DRIVERS is not set
-CONFIG_SND_INTEL8X0=y
-# CONFIG_SND_PPC is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_POWERPC_SOC=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB_HID=m
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_OF_ESDHC=y
-CONFIG_EDAC=y
-CONFIG_EDAC_MM_EDAC=y
-CONFIG_EDAC_MPC85XX=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_DS1374=y
-CONFIG_RTC_DRV_DS3232=y
-CONFIG_RTC_DRV_CMOS=y
-CONFIG_DMADEVICES=y
-CONFIG_FSL_DMA=y
-CONFIG_UIO=y
-CONFIG_VIRT_DRIVERS=y
-CONFIG_FSL_HV_MANAGER=y
-CONFIG_CLK_QORIQ=y
-CONFIG_FSL_CORENET_CF=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT4_FS=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_ADFS_FS=m
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_UBIFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_VXFS_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_CRC_T10DIF=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_DEBUG_INFO=y
-CONFIG_FRAME_WARN=1024
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_RCU_TRACE=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_DEV_FSL_CAAM=y
-CONFIG_CRYPTO_DEV_TALITOS=y
diff --git a/arch/powerpc/configs/corenet_basic_defconfig b/arch/powerpc/configs/corenet_basic_defconfig
new file mode 100644
index 000000000000..b568d465e59e
--- /dev/null
+++ b/arch/powerpc/configs/corenet_basic_defconfig
@@ -0,0 +1 @@
+CONFIG_CORENET_GENERIC=y
diff --git a/arch/powerpc/configs/fsl-emb-nonhw.config b/arch/powerpc/configs/fsl-emb-nonhw.config
new file mode 100644
index 000000000000..41e4d359524d
--- /dev/null
+++ b/arch/powerpc/configs/fsl-emb-nonhw.config
@@ -0,0 +1,126 @@
+CONFIG_ADFS_FS=m
+CONFIG_AFFS_FS=m
+CONFIG_AUDIT=y
+CONFIG_BEFS_FS=m
+CONFIG_BFS_FS=m
+CONFIG_BINFMT_MISC=m
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUPS=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_CPUSETS=y
+CONFIG_CRAMFS=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_DEVTMPFS=y
+CONFIG_DUMMY=y
+CONFIG_EFS_FS=m
+CONFIG_EXPERT=y
+CONFIG_EXT2_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS=y
+CONFIG_FB=y
+CONFIG_FHANDLE=y
+CONFIG_FIXED_PHY=y
+CONFIG_FONT_8x16=y
+CONFIG_FONT_8x8=y
+CONFIG_FONTS=y
+CONFIG_FORCE_MAX_ZONEORDER=13
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAME_WARN=1024
+CONFIG_FTL=y
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_HPFS_FS=m
+CONFIG_HUGETLBFS=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_IKCONFIG=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_IP_PNP=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_SCTP=m
+CONFIG_IPV6=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_ISO9660_FS=m
+CONFIG_JFFS2_FS_DEBUG=1
+CONFIG_JFFS2_FS=y
+CONFIG_JOLIET=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_MAC_PARTITION=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MSDOS_FS=m
+CONFIG_MTD_UBI=y
+CONFIG_MTD=y
+CONFIG_NET_IPIP=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_NET_KEY=y
+CONFIG_NET=y
+CONFIG_NFSD=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=m
+CONFIG_NO_HZ=y
+CONFIG_NTFS_FS=y
+CONFIG_PACKET=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_PERF_EVENTS=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_QNX4FS_FS=m
+CONFIG_RCU_TRACE=y
+CONFIG_ROOT_NFS=y
+CONFIG_SYSV_FS=m
+CONFIG_SYSVIPC=y
+CONFIG_TMPFS=y
+CONFIG_UBIFS_FS=y
+CONFIG_UDF_FS=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_UFS_FS=m
+CONFIG_UIO=y
+CONFIG_UNIX=y
+CONFIG_VFAT_FS=y
+CONFIG_VXFS_FS=m
+CONFIG_XFRM_STATISTICS=y
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_USER=y
+CONFIG_ZISOFS=y
diff --git a/arch/powerpc/configs/mpc85xx_basic_defconfig b/arch/powerpc/configs/mpc85xx_basic_defconfig
new file mode 100644
index 000000000000..850bd195d0e8
--- /dev/null
+++ b/arch/powerpc/configs/mpc85xx_basic_defconfig
@@ -0,0 +1,23 @@
+CONFIG_MATH_EMULATION=y
+CONFIG_MPC8536_DS=y
+CONFIG_MPC8540_ADS=y
+CONFIG_MPC8560_ADS=y
+CONFIG_MPC85xx_CDS=y
+CONFIG_MPC85xx_DS=y
+CONFIG_MPC85xx_MDS=y
+CONFIG_MPC85xx_RDB=y
+CONFIG_KSI8560=y
+CONFIG_MVME2500=y
+CONFIG_P1010_RDB=y
+CONFIG_P1022_DS=y
+CONFIG_P1022_RDK=y
+CONFIG_P1023_RDB=y
+CONFIG_SBC8548=y
+CONFIG_SOCRATES=y
+CONFIG_STX_GP3=y
+CONFIG_TQM8540=y
+CONFIG_TQM8541=y
+CONFIG_TQM8548=y
+CONFIG_TQM8555=y
+CONFIG_TQM8560=y
+CONFIG_XES_MPC85xx=y
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
deleted file mode 100644
index f551fb43cab8..000000000000
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ /dev/null
@@ -1,288 +0,0 @@
-CONFIG_PPC_85xx=y
-CONFIG_PHYS_64BIT=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
-CONFIG_AUDIT=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_CPUSETS=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_PERF_EVENTS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_C293_PCIE=y
-CONFIG_MPC8540_ADS=y
-CONFIG_MPC8560_ADS=y
-CONFIG_MPC85xx_CDS=y
-CONFIG_MPC85xx_MDS=y
-CONFIG_MPC8536_DS=y
-CONFIG_MPC85xx_DS=y
-CONFIG_MPC85xx_RDB=y
-CONFIG_P1010_RDB=y
-CONFIG_P1022_DS=y
-CONFIG_P1022_RDK=y
-CONFIG_P1023_RDB=y
-CONFIG_SOCRATES=y
-CONFIG_KSI8560=y
-CONFIG_XES_MPC85xx=y
-CONFIG_STX_GP3=y
-CONFIG_TQM8540=y
-CONFIG_TQM8541=y
-CONFIG_TQM8548=y
-CONFIG_TQM8555=y
-CONFIG_TQM8560=y
-CONFIG_SBC8548=y
-CONFIG_MVME2500=y
-CONFIG_QUICC_ENGINE=y
-CONFIG_QE_GPIO=y
-CONFIG_HIGHMEM=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_MATH_EMULATION=y
-CONFIG_KEXEC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-# CONFIG_PCIEASPM is not set
-CONFIG_PCI_MSI=y
-CONFIG_RAPIDIO=y
-CONFIG_FSL_RIO=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_XFRM_SUB_POLICY=y
-CONFIG_XFRM_STATISTICS=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_INET_AH=y
-CONFIG_INET_ESP=y
-CONFIG_INET_IPCOMP=y
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
-CONFIG_IP_SCTP=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_FTL=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_FSL_ELBC=y
-CONFIG_MTD_NAND_FSL_IFC=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_LEGACY=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_FSL=y
-CONFIG_SATA_SIL24=y
-CONFIG_SATA_SIL=y
-CONFIG_PATA_ALI=y
-CONFIG_PATA_SIL680=y
-CONFIG_PATA_VIA=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_FS_ENET=y
-CONFIG_FSL_XGMAC_MDIO=y
-CONFIG_UCC_GETH=y
-CONFIG_GIANFAR=y
-CONFIG_E1000=y
-CONFIG_E1000E=y
-CONFIG_IGB=y
-CONFIG_AT803X_PHY=y
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_FIXED_PHY=y
-CONFIG_MDIO_BUS_MUX_GPIO=y
-CONFIG_MDIO_BUS_MUX_MMIOREG=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_PPC_EPAPR_HV_BYTECHAN=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=6
-CONFIG_SERIAL_8250_RUNTIME_UARTS=6
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_SERIAL_QE=m
-CONFIG_NVRAM=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_I2C_CPM=m
-CONFIG_I2C_MPC=y
-CONFIG_SPI=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_FSL_SPI=y
-CONFIG_SPI_FSL_ESPI=y
-CONFIG_GPIO_MPC8XXX=y
-CONFIG_SENSORS_LM90=y
-CONFIG_SENSORS_INA2XX=y
-CONFIG_FB=y
-CONFIG_FB_FSL_DIU=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_DRIVERS is not set
-CONFIG_SND_INTEL8X0=y
-# CONFIG_SND_PPC is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_POWERPC_SOC=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB_HID=m
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_OF_ESDHC=y
-CONFIG_EDAC=y
-CONFIG_EDAC_MM_EDAC=y
-CONFIG_EDAC_MPC85XX=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_DS1374=y
-CONFIG_RTC_DRV_DS3232=y
-CONFIG_RTC_DRV_CMOS=y
-CONFIG_DMADEVICES=y
-CONFIG_FSL_DMA=y
-CONFIG_UIO=y
-CONFIG_VIRT_DRIVERS=y
-CONFIG_FSL_HV_MANAGER=y
-CONFIG_FSL_CORENET_CF=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_ADFS_FS=m
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_UBIFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_VXFS_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_CRC_T10DIF=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_RCU_TRACE=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_DEV_FSL_CAAM=y
-CONFIG_CRYPTO_DEV_TALITOS=y
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
deleted file mode 100644
index 237b3e4ee24f..000000000000
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ /dev/null
@@ -1,289 +0,0 @@
-CONFIG_PPC_85xx=y
-CONFIG_PHYS_64BIT=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=24
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
-CONFIG_AUDIT=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_CPUSETS=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_PERF_EVENTS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_C293_PCIE=y
-CONFIG_MPC8540_ADS=y
-CONFIG_MPC8560_ADS=y
-CONFIG_MPC85xx_CDS=y
-CONFIG_MPC85xx_MDS=y
-CONFIG_MPC8536_DS=y
-CONFIG_MPC85xx_DS=y
-CONFIG_MPC85xx_RDB=y
-CONFIG_P1010_RDB=y
-CONFIG_P1022_DS=y
-CONFIG_P1022_RDK=y
-CONFIG_P1023_RDB=y
-CONFIG_SOCRATES=y
-CONFIG_KSI8560=y
-CONFIG_XES_MPC85xx=y
-CONFIG_STX_GP3=y
-CONFIG_TQM8540=y
-CONFIG_TQM8541=y
-CONFIG_TQM8548=y
-CONFIG_TQM8555=y
-CONFIG_TQM8560=y
-CONFIG_SBC8548=y
-CONFIG_MVME2500=y
-CONFIG_QUICC_ENGINE=y
-CONFIG_QE_GPIO=y
-CONFIG_HIGHMEM=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_MATH_EMULATION=y
-CONFIG_KEXEC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-# CONFIG_PCIEASPM is not set
-CONFIG_PCI_MSI=y
-CONFIG_RAPIDIO=y
-CONFIG_FSL_RIO=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_XFRM_SUB_POLICY=y
-CONFIG_XFRM_STATISTICS=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_INET_AH=y
-CONFIG_INET_ESP=y
-CONFIG_INET_IPCOMP=y
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
-CONFIG_IP_SCTP=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_FTL=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_FSL_ELBC=y
-CONFIG_MTD_NAND_FSL_IFC=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_LEGACY=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_FSL=y
-CONFIG_SATA_SIL24=y
-CONFIG_SATA_SIL=y
-CONFIG_PATA_ALI=y
-CONFIG_PATA_SIL680=y
-CONFIG_PATA_VIA=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_FS_ENET=y
-CONFIG_FSL_XGMAC_MDIO=y
-CONFIG_UCC_GETH=y
-CONFIG_GIANFAR=y
-CONFIG_E1000=y
-CONFIG_E1000E=y
-CONFIG_IGB=y
-CONFIG_AT803X_PHY=y
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_FIXED_PHY=y
-CONFIG_MDIO_BUS_MUX_GPIO=y
-CONFIG_MDIO_BUS_MUX_MMIOREG=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_PPC_EPAPR_HV_BYTECHAN=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=6
-CONFIG_SERIAL_8250_RUNTIME_UARTS=6
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_SERIAL_QE=m
-CONFIG_NVRAM=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_I2C_CPM=m
-CONFIG_I2C_MPC=y
-CONFIG_SPI=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_FSL_SPI=y
-CONFIG_SPI_FSL_ESPI=y
-CONFIG_GPIO_MPC8XXX=y
-CONFIG_SENSORS_LM90=y
-CONFIG_SENSORS_INA2XX=y
-CONFIG_FB=y
-CONFIG_FB_FSL_DIU=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_DRIVERS is not set
-CONFIG_SND_INTEL8X0=y
-# CONFIG_SND_PPC is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_POWERPC_SOC=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB_HID=m
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_OF_ESDHC=y
-CONFIG_EDAC=y
-CONFIG_EDAC_MM_EDAC=y
-CONFIG_EDAC_MPC85XX=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_DS1374=y
-CONFIG_RTC_DRV_DS3232=y
-CONFIG_RTC_DRV_CMOS=y
-CONFIG_DMADEVICES=y
-CONFIG_FSL_DMA=y
-CONFIG_UIO=y
-CONFIG_VIRT_DRIVERS=y
-CONFIG_FSL_HV_MANAGER=y
-CONFIG_FSL_CORENET_CF=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_ADFS_FS=m
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_UBIFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_VXFS_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_CRC_T10DIF=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_DEBUG_INFO=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_RCU_TRACE=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_DEV_FSL_CAAM=y
-CONFIG_CRYPTO_DEV_TALITOS=y

From 92c985f1d76c228abe202cb3004f03c9b45860d1 Mon Sep 17 00:00:00 2001
From: LEROY Christophe <christophe.leroy@c-s.fr>
Date: Tue, 19 May 2015 17:18:55 +0200
Subject: [PATCH 056/140] powerpc: put csum_tcpudp_magic inline

csum_tcpudp_magic() is only a few instructions, and does modify
really few registers. So it is not worth having it as a separate
function and suffer function branching and saving of volatile
registers.

This patch makes it inline by use of the already existing
csum_tcpudp_nofold() function.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/include/asm/checksum.h | 21 ++++++++++++---------
 arch/powerpc/lib/checksum_32.S      | 16 ----------------
 arch/powerpc/lib/checksum_64.S      | 21 ---------------------
 3 files changed, 12 insertions(+), 46 deletions(-)

diff --git a/arch/powerpc/include/asm/checksum.h b/arch/powerpc/include/asm/checksum.h
index 8251a3ba870f..5e43d2d40084 100644
--- a/arch/powerpc/include/asm/checksum.h
+++ b/arch/powerpc/include/asm/checksum.h
@@ -19,15 +19,6 @@
 #else
 extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
 
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-extern __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-					unsigned short len,
-					unsigned short proto,
-					__wsum sum);
-
 /*
  * computes the checksum of a memory block at buff, length len,
  * and adds in "sum" (32-bit)
@@ -127,6 +118,18 @@ static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
 #endif
 }
 
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+					unsigned short len,
+					unsigned short proto,
+					__wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
 #endif
 #endif /* __KERNEL__ */
 #endif
diff --git a/arch/powerpc/lib/checksum_32.S b/arch/powerpc/lib/checksum_32.S
index 7874e8a80455..6d67e057f15e 100644
--- a/arch/powerpc/lib/checksum_32.S
+++ b/arch/powerpc/lib/checksum_32.S
@@ -40,22 +40,6 @@ _GLOBAL(ip_fast_csum)
 	srwi	r3,r3,16
 	blr
 
-/*
- * Compute checksum of TCP or UDP pseudo-header:
- *   csum_tcpudp_magic(saddr, daddr, len, proto, sum)
- */	
-_GLOBAL(csum_tcpudp_magic)
-	rlwimi	r5,r6,16,0,15	/* put proto in upper half of len */
-	addc	r0,r3,r4	/* add 4 32-bit words together */
-	adde	r0,r0,r5
-	adde	r0,r0,r7
-	addze	r0,r0		/* add in final carry */
-	rlwinm	r3,r0,16,0,31	/* fold two halves together */
-	add	r3,r0,r3
-	not	r3,r3
-	srwi	r3,r3,16
-	blr
-
 /*
  * computes the checksum of a memory block at buff, length len,
  * and adds in "sum" (32-bit)
diff --git a/arch/powerpc/lib/checksum_64.S b/arch/powerpc/lib/checksum_64.S
index 57a072065057..f3ef35436612 100644
--- a/arch/powerpc/lib/checksum_64.S
+++ b/arch/powerpc/lib/checksum_64.S
@@ -44,27 +44,6 @@ _GLOBAL(ip_fast_csum)
 	srwi	r3,r3,16
 	blr
 
-/*
- * Compute checksum of TCP or UDP pseudo-header:
- *   csum_tcpudp_magic(r3=saddr, r4=daddr, r5=len, r6=proto, r7=sum)
- * No real gain trying to do this specially for 64 bit, but
- * the 32 bit addition may spill into the upper bits of
- * the doubleword so we still must fold it down from 64.
- */	
-_GLOBAL(csum_tcpudp_magic)
-	rlwimi	r5,r6,16,0,15	/* put proto in upper half of len */
-	addc	r0,r3,r4	/* add 4 32-bit words together */
-	adde	r0,r0,r5
-	adde	r0,r0,r7
-        rldicl  r4,r0,32,0      /* fold 64 bit value */
-        add     r0,r4,r0
-        srdi    r0,r0,32
-	rlwinm	r3,r0,16,0,31	/* fold two halves together */
-	add	r3,r0,r3
-	not	r3,r3
-	srwi	r3,r3,16
-	blr
-
 /*
  * Computes the checksum of a memory block at buff, length len,
  * and adds in "sum" (32-bit).

From 501c8de7b061d2dc0c21a0a79fee3eddf30af8dd Mon Sep 17 00:00:00 2001
From: LEROY Christophe <christophe.leroy@c-s.fr>
Date: Tue, 19 May 2015 17:18:57 +0200
Subject: [PATCH 057/140] powerpc: add support for csum_add()

The C version of csum_add() as defined in include/net/checksum.h gives
the following assembly in ppc32:
       0:       7c 04 1a 14     add     r0,r4,r3
       4:       7c 64 00 10     subfc   r3,r4,r0
       8:       7c 63 19 10     subfe   r3,r3,r3
       c:       7c 63 00 50     subf    r3,r3,r0
and the following in ppc64:
   0xc000000000001af8 <+0>:	add     r3,r3,r4
   0xc000000000001afc <+4>:	cmplw   cr7,r3,r4
   0xc000000000001b00 <+8>:	mfcr    r4
   0xc000000000001b04 <+12>:	rlwinm  r4,r4,29,31,31
   0xc000000000001b08 <+16>:	add     r3,r4,r3
   0xc000000000001b0c <+20>:	clrldi  r3,r3,32
   0xc000000000001b10 <+24>:	blr

include/net/checksum.h also offers the possibility to define an arch
specific function.  This patch provides a specific csum_add() inline
function.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/include/asm/checksum.h | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/powerpc/include/asm/checksum.h b/arch/powerpc/include/asm/checksum.h
index 5e43d2d40084..e8d9ef4755a4 100644
--- a/arch/powerpc/include/asm/checksum.h
+++ b/arch/powerpc/include/asm/checksum.h
@@ -130,6 +130,22 @@ static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
 	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
 }
 
+#define HAVE_ARCH_CSUM_ADD
+static inline __wsum csum_add(__wsum csum, __wsum addend)
+{
+#ifdef __powerpc64__
+	u64 res = (__force u64)csum;
+
+	res += (__force u64)addend;
+	return (__force __wsum)((u32)res + (res >> 32));
+#else
+	asm("addc %0,%0,%1;"
+	    "addze %0,%0;"
+	    : "+r" (csum) : "r" (addend));
+	return csum;
+#endif
+}
+
 #endif
 #endif /* __KERNEL__ */
 #endif

From 2f7d2b74a9dd9140053f143e1c94da0fef3c1109 Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Wed, 15 Apr 2015 19:40:23 -0500
Subject: [PATCH 058/140] powerpc/mm: Don't call __flush_dcache_icache_phys()
 with PA>VA

__flush_dcache_icache_phys() requires the ability to access the
memory with the MMU disabled, which means that on a 32-bit system
any memory above 4 GiB is inaccessible.  In particular, mpc86xx is
32-bit and can have more than 4 GiB of RAM.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/include/asm/cacheflush.h |  7 ++++++-
 arch/powerpc/mm/mem.c                 | 14 +++++++-------
 2 files changed, 13 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/include/asm/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h
index 30b35fff2dea..6229e6b6037b 100644
--- a/arch/powerpc/include/asm/cacheflush.h
+++ b/arch/powerpc/include/asm/cacheflush.h
@@ -40,7 +40,12 @@ extern void __flush_dcache_icache(void *page_va);
 extern void flush_dcache_icache_page(struct page *page);
 #if defined(CONFIG_PPC32) && !defined(CONFIG_BOOKE)
 extern void __flush_dcache_icache_phys(unsigned long physaddr);
-#endif /* CONFIG_PPC32 && !CONFIG_BOOKE */
+#else
+static inline void __flush_dcache_icache_phys(unsigned long physaddr)
+{
+	BUG();
+}
+#endif
 
 extern void flush_dcache_range(unsigned long start, unsigned long stop);
 #ifdef CONFIG_PPC32
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 0f11819d8f1d..e1fe333da946 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -414,17 +414,17 @@ void flush_dcache_icache_page(struct page *page)
 		return;
 	}
 #endif
-#ifdef CONFIG_BOOKE
-	{
+#if defined(CONFIG_8xx) || defined(CONFIG_PPC64)
+	/* On 8xx there is no need to kmap since highmem is not supported */
+	__flush_dcache_icache(page_address(page));
+#else
+	if (IS_ENABLED(CONFIG_BOOKE) || sizeof(phys_addr_t) > sizeof(void *)) {
 		void *start = kmap_atomic(page);
 		__flush_dcache_icache(start);
 		kunmap_atomic(start);
+	} else {
+		__flush_dcache_icache_phys(page_to_pfn(page) << PAGE_SHIFT);
 	}
-#elif defined(CONFIG_8xx) || defined(CONFIG_PPC64)
-	/* On 8xx there is no need to kmap since highmem is not supported */
-	__flush_dcache_icache(page_address(page)); 
-#else
-	__flush_dcache_icache_phys(page_to_pfn(page) << PAGE_SHIFT);
 #endif
 }
 EXPORT_SYMBOL(flush_dcache_icache_page);

From 934628c7e69dc4481011df2c1db86f6be50dad29 Mon Sep 17 00:00:00 2001
From: LEROY Christophe <christophe.leroy@c-s.fr>
Date: Tue, 19 May 2015 12:07:46 +0200
Subject: [PATCH 059/140] powerpc: use memset_io() to clear CPM Muram

CPM muram is not cached, so use memset_io() instead of memset()

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/sysdev/cpm_common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index 4f7869571290..e2ea51961979 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -147,7 +147,7 @@ unsigned long cpm_muram_alloc(unsigned long size, unsigned long align)
 	spin_lock_irqsave(&cpm_muram_lock, flags);
 	cpm_muram_info.alignment = align;
 	start = rh_alloc(&cpm_muram_info, size, "commproc");
-	memset(cpm_muram_addr(start), 0, size);
+	memset_io(cpm_muram_addr(start), 0, size);
 	spin_unlock_irqrestore(&cpm_muram_lock, flags);
 
 	return start;

From df087e450d7ddc0b15bd8824206d964720b4f5e4 Mon Sep 17 00:00:00 2001
From: LEROY Christophe <christophe.leroy@c-s.fr>
Date: Tue, 19 May 2015 12:07:48 +0200
Subject: [PATCH 060/140] Partially revert "powerpc: Remove duplicate
 cacheable_memcpy/memzero functions"

This partially reverts
commit 'powerpc: Remove duplicate cacheable_memcpy/memzero functions
("b05ae4ee602b7dc90771408ccf0972e1b3801a35")'

Functions cacheable_memcpy/memzero are more efficient than
memcpy/memset as they use the dcbz instruction which avoids refill
of the cacheline with the data that we will overwrite.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/lib/copy_32.S | 127 +++++++++++++++++++++++++++++++++++++
 1 file changed, 127 insertions(+)

diff --git a/arch/powerpc/lib/copy_32.S b/arch/powerpc/lib/copy_32.S
index 6813f80d1eec..55f19f9fd708 100644
--- a/arch/powerpc/lib/copy_32.S
+++ b/arch/powerpc/lib/copy_32.S
@@ -69,6 +69,54 @@ CACHELINE_BYTES = L1_CACHE_BYTES
 LG_CACHELINE_BYTES = L1_CACHE_SHIFT
 CACHELINE_MASK = (L1_CACHE_BYTES-1)
 
+/*
+ * Use dcbz on the complete cache lines in the destination
+ * to set them to zero.  This requires that the destination
+ * area is cacheable.  -- paulus
+ */
+_GLOBAL(cacheable_memzero)
+	mr	r5,r4
+	li	r4,0
+	addi	r6,r3,-4
+	cmplwi	0,r5,4
+	blt	7f
+	stwu	r4,4(r6)
+	beqlr
+	andi.	r0,r6,3
+	add	r5,r0,r5
+	subf	r6,r0,r6
+	clrlwi	r7,r6,32-LG_CACHELINE_BYTES
+	add	r8,r7,r5
+	srwi	r9,r8,LG_CACHELINE_BYTES
+	addic.	r9,r9,-1	/* total number of complete cachelines */
+	ble	2f
+	xori	r0,r7,CACHELINE_MASK & ~3
+	srwi.	r0,r0,2
+	beq	3f
+	mtctr	r0
+4:	stwu	r4,4(r6)
+	bdnz	4b
+3:	mtctr	r9
+	li	r7,4
+10:	dcbz	r7,r6
+	addi	r6,r6,CACHELINE_BYTES
+	bdnz	10b
+	clrlwi	r5,r8,32-LG_CACHELINE_BYTES
+	addi	r5,r5,4
+2:	srwi	r0,r5,2
+	mtctr	r0
+	bdz	6f
+1:	stwu	r4,4(r6)
+	bdnz	1b
+6:	andi.	r5,r5,3
+7:	cmpwi	0,r5,0
+	beqlr
+	mtctr	r5
+	addi	r6,r6,3
+8:	stbu	r4,1(r6)
+	bdnz	8b
+	blr
+
 _GLOBAL(memset)
 	rlwimi	r4,r4,8,16,23
 	rlwimi	r4,r4,16,0,15
@@ -94,6 +142,85 @@ _GLOBAL(memset)
 	bdnz	8b
 	blr
 
+/*
+ * This version uses dcbz on the complete cache lines in the
+ * destination area to reduce memory traffic.  This requires that
+ * the destination area is cacheable.
+ * We only use this version if the source and dest don't overlap.
+ * -- paulus.
+ */
+_GLOBAL(cacheable_memcpy)
+	add	r7,r3,r5		/* test if the src & dst overlap */
+	add	r8,r4,r5
+	cmplw	0,r4,r7
+	cmplw	1,r3,r8
+	crand	0,0,4			/* cr0.lt &= cr1.lt */
+	blt	memcpy			/* if regions overlap */
+
+	addi	r4,r4,-4
+	addi	r6,r3,-4
+	neg	r0,r3
+	andi.	r0,r0,CACHELINE_MASK	/* # bytes to start of cache line */
+	beq	58f
+
+	cmplw	0,r5,r0			/* is this more than total to do? */
+	blt	63f			/* if not much to do */
+	andi.	r8,r0,3			/* get it word-aligned first */
+	subf	r5,r0,r5
+	mtctr	r8
+	beq+	61f
+70:	lbz	r9,4(r4)		/* do some bytes */
+	stb	r9,4(r6)
+	addi	r4,r4,1
+	addi	r6,r6,1
+	bdnz	70b
+61:	srwi.	r0,r0,2
+	mtctr	r0
+	beq	58f
+72:	lwzu	r9,4(r4)		/* do some words */
+	stwu	r9,4(r6)
+	bdnz	72b
+
+58:	srwi.	r0,r5,LG_CACHELINE_BYTES /* # complete cachelines */
+	clrlwi	r5,r5,32-LG_CACHELINE_BYTES
+	li	r11,4
+	mtctr	r0
+	beq	63f
+53:
+	dcbz	r11,r6
+	COPY_16_BYTES
+#if L1_CACHE_BYTES >= 32
+	COPY_16_BYTES
+#if L1_CACHE_BYTES >= 64
+	COPY_16_BYTES
+	COPY_16_BYTES
+#if L1_CACHE_BYTES >= 128
+	COPY_16_BYTES
+	COPY_16_BYTES
+	COPY_16_BYTES
+	COPY_16_BYTES
+#endif
+#endif
+#endif
+	bdnz	53b
+
+63:	srwi.	r0,r5,2
+	mtctr	r0
+	beq	64f
+30:	lwzu	r0,4(r4)
+	stwu	r0,4(r6)
+	bdnz	30b
+
+64:	andi.	r0,r5,3
+	mtctr	r0
+	beq+	65f
+40:	lbz	r0,4(r4)
+	stb	r0,4(r6)
+	addi	r4,r4,1
+	addi	r6,r6,1
+	bdnz	40b
+65:	blr
+
 _GLOBAL(memmove)
 	cmplw	0,r3,r4
 	bgt	backwards_memcpy

From 5b2a32e806342f237f68435a50e1071f7f32b5c5 Mon Sep 17 00:00:00 2001
From: LEROY Christophe <christophe.leroy@c-s.fr>
Date: Tue, 19 May 2015 12:07:50 +0200
Subject: [PATCH 061/140] powerpc/32: memset(0): use cacheable_memzero

cacheable_memzero uses dcbz instruction and is more efficient than
memset(0) when the destination is in RAM

This patch renames memset as generic_memset, and defines memset
as a prolog to cacheable_memzero. This prolog checks if the byte
to set is 0. If not, it falls back to generic_memcpy()

cacheable_memzero disappears as it is not referenced anywhere anymore

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/lib/copy_32.S | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/lib/copy_32.S b/arch/powerpc/lib/copy_32.S
index 55f19f9fd708..0b4f954961bf 100644
--- a/arch/powerpc/lib/copy_32.S
+++ b/arch/powerpc/lib/copy_32.S
@@ -74,9 +74,9 @@ CACHELINE_MASK = (L1_CACHE_BYTES-1)
  * to set them to zero.  This requires that the destination
  * area is cacheable.  -- paulus
  */
-_GLOBAL(cacheable_memzero)
-	mr	r5,r4
-	li	r4,0
+_GLOBAL(memset)
+	cmplwi	r4,0
+	bne-	generic_memset
 	addi	r6,r3,-4
 	cmplwi	0,r5,4
 	blt	7f
@@ -117,7 +117,7 @@ _GLOBAL(cacheable_memzero)
 	bdnz	8b
 	blr
 
-_GLOBAL(memset)
+_GLOBAL(generic_memset)
 	rlwimi	r4,r4,8,16,23
 	rlwimi	r4,r4,16,0,15
 	addi	r6,r3,-4

From c152f149ce8e47bc04061a9e9e5f53e219ee5b95 Mon Sep 17 00:00:00 2001
From: LEROY Christophe <christophe.leroy@c-s.fr>
Date: Tue, 19 May 2015 12:07:52 +0200
Subject: [PATCH 062/140] powerpc/32: Merge the new memset() with the old one

cacheable_memzero() which has become the new memset() and the old
memset() are quite similar, so just merge them.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/lib/copy_32.S | 34 +++++++---------------------------
 1 file changed, 7 insertions(+), 27 deletions(-)

diff --git a/arch/powerpc/lib/copy_32.S b/arch/powerpc/lib/copy_32.S
index 0b4f954961bf..9262071a9707 100644
--- a/arch/powerpc/lib/copy_32.S
+++ b/arch/powerpc/lib/copy_32.S
@@ -75,8 +75,9 @@ CACHELINE_MASK = (L1_CACHE_BYTES-1)
  * area is cacheable.  -- paulus
  */
 _GLOBAL(memset)
-	cmplwi	r4,0
-	bne-	generic_memset
+	rlwimi	r4,r4,8,16,23
+	rlwimi	r4,r4,16,0,15
+
 	addi	r6,r3,-4
 	cmplwi	0,r5,4
 	blt	7f
@@ -85,6 +86,9 @@ _GLOBAL(memset)
 	andi.	r0,r6,3
 	add	r5,r0,r5
 	subf	r6,r0,r6
+	cmplwi	0,r4,0
+	bne	2f	/* Use normal procedure if r4 is not zero */
+
 	clrlwi	r7,r6,32-LG_CACHELINE_BYTES
 	add	r8,r7,r5
 	srwi	r9,r8,LG_CACHELINE_BYTES
@@ -103,32 +107,8 @@ _GLOBAL(memset)
 	bdnz	10b
 	clrlwi	r5,r8,32-LG_CACHELINE_BYTES
 	addi	r5,r5,4
-2:	srwi	r0,r5,2
-	mtctr	r0
-	bdz	6f
-1:	stwu	r4,4(r6)
-	bdnz	1b
-6:	andi.	r5,r5,3
-7:	cmpwi	0,r5,0
-	beqlr
-	mtctr	r5
-	addi	r6,r6,3
-8:	stbu	r4,1(r6)
-	bdnz	8b
-	blr
 
-_GLOBAL(generic_memset)
-	rlwimi	r4,r4,8,16,23
-	rlwimi	r4,r4,16,0,15
-	addi	r6,r3,-4
-	cmplwi	0,r5,4
-	blt	7f
-	stwu	r4,4(r6)
-	beqlr
-	andi.	r0,r6,3
-	add	r5,r0,r5
-	subf	r6,r0,r6
-	srwi	r0,r5,2
+2:	srwi	r0,r5,2
 	mtctr	r0
 	bdz	6f
 1:	stwu	r4,4(r6)

From 0b05e2d671c40cfb57e66e4e402320d6e056b2f8 Mon Sep 17 00:00:00 2001
From: LEROY Christophe <christophe.leroy@c-s.fr>
Date: Tue, 19 May 2015 12:07:55 +0200
Subject: [PATCH 063/140] powerpc/32: cacheable_memcpy becomes memcpy

cacheable_memcpy uses dcbz instruction and is more efficient than
memcpy when the destination is in RAM. If the destination is in an
io area, memcpy_toio() is normally used, not memcpy

This patch renames memcpy as generic_memcpy, and renames
cacheable_memcpy as memcpy

On MPC885, we get approximatly 7% increase of the transfer rate
on an FTP reception

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/lib/copy_32.S | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/lib/copy_32.S b/arch/powerpc/lib/copy_32.S
index 9262071a9707..1d49c740407a 100644
--- a/arch/powerpc/lib/copy_32.S
+++ b/arch/powerpc/lib/copy_32.S
@@ -129,13 +129,18 @@ _GLOBAL(memset)
  * We only use this version if the source and dest don't overlap.
  * -- paulus.
  */
-_GLOBAL(cacheable_memcpy)
+_GLOBAL(memmove)
+	cmplw	0,r3,r4
+	bgt	backwards_memcpy
+	/* fall through */
+
+_GLOBAL(memcpy)
 	add	r7,r3,r5		/* test if the src & dst overlap */
 	add	r8,r4,r5
 	cmplw	0,r4,r7
 	cmplw	1,r3,r8
 	crand	0,0,4			/* cr0.lt &= cr1.lt */
-	blt	memcpy			/* if regions overlap */
+	blt	generic_memcpy		/* if regions overlap */
 
 	addi	r4,r4,-4
 	addi	r6,r3,-4
@@ -201,12 +206,7 @@ _GLOBAL(cacheable_memcpy)
 	bdnz	40b
 65:	blr
 
-_GLOBAL(memmove)
-	cmplw	0,r3,r4
-	bgt	backwards_memcpy
-	/* fall through */
-
-_GLOBAL(memcpy)
+_GLOBAL(generic_memcpy)
 	srwi.	r7,r5,3
 	addi	r6,r3,-4
 	addi	r4,r4,-4

From 295ffb41896f566d4bd6f93fc230f5d411d373cb Mon Sep 17 00:00:00 2001
From: LEROY Christophe <christophe.leroy@c-s.fr>
Date: Tue, 19 May 2015 12:07:57 +0200
Subject: [PATCH 064/140] powerpc/32: Few optimisations in memcpy

This patch adds a few optimisations in memcpy functions by using
lbzu/stbu instead of lxb/stb and by re-ordering insn inside a loop
to reduce latency due to loading

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/lib/copy_32.S | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/lib/copy_32.S b/arch/powerpc/lib/copy_32.S
index 1d49c740407a..2ef50c629470 100644
--- a/arch/powerpc/lib/copy_32.S
+++ b/arch/powerpc/lib/copy_32.S
@@ -155,9 +155,9 @@ _GLOBAL(memcpy)
 	mtctr	r8
 	beq+	61f
 70:	lbz	r9,4(r4)		/* do some bytes */
-	stb	r9,4(r6)
 	addi	r4,r4,1
 	addi	r6,r6,1
+	stb	r9,3(r6)
 	bdnz	70b
 61:	srwi.	r0,r0,2
 	mtctr	r0
@@ -199,10 +199,10 @@ _GLOBAL(memcpy)
 64:	andi.	r0,r5,3
 	mtctr	r0
 	beq+	65f
-40:	lbz	r0,4(r4)
-	stb	r0,4(r6)
-	addi	r4,r4,1
-	addi	r6,r6,1
+	addi	r4,r4,3
+	addi	r6,r6,3
+40:	lbzu	r0,1(r4)
+	stbu	r0,1(r6)
 	bdnz	40b
 65:	blr
 

From 4a6b8a4b20e22e0c170ecd785009fadd7d611e0e Mon Sep 17 00:00:00 2001
From: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Date: Tue, 7 Jul 2015 14:17:40 +0800
Subject: [PATCH 065/140] powerpc/t1024rdb: add ina220 current sensor node

Add support for INA220 current sensor.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/dts/t1024rdb.dts | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/powerpc/boot/dts/t1024rdb.dts b/arch/powerpc/boot/dts/t1024rdb.dts
index 733e723ffed6..bf05e324fda2 100644
--- a/arch/powerpc/boot/dts/t1024rdb.dts
+++ b/arch/powerpc/boot/dts/t1024rdb.dts
@@ -114,6 +114,12 @@
 				reg = <0x4c>;
 			};
 
+			current-sensor@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
 			eeprom@50 {
 				compatible = "atmel,24c256";
 				reg = <0x50>;

From add888d6b2db1c52a273093f741e449cf9a28342 Mon Sep 17 00:00:00 2001
From: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Date: Tue, 7 Jul 2015 14:17:41 +0800
Subject: [PATCH 066/140] powerpc/t1023rdb: add ina220 current sensor node

Add support for INA220 current sensor.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/dts/t1023rdb.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/powerpc/boot/dts/t1023rdb.dts b/arch/powerpc/boot/dts/t1023rdb.dts
index 06b090aba066..aa50885b9212 100644
--- a/arch/powerpc/boot/dts/t1023rdb.dts
+++ b/arch/powerpc/boot/dts/t1023rdb.dts
@@ -99,6 +99,17 @@
 		};
 
 		i2c@118100 {
+			current-sensor@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			current-sensor@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
 		};
 	};
 

From b6808fb731b9a39cc2b676576f76df978208eec6 Mon Sep 17 00:00:00 2001
From: Shaohui Xie <Shaohui.Xie@freescale.com>
Date: Fri, 24 Jul 2015 11:45:33 +0800
Subject: [PATCH 067/140] powerpc/85xx: enable teranetics PHY

The PHY uses XAUI interface to connect to MAC, mostly the PHY used on
riser card.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/configs/85xx-hw.config | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/configs/85xx-hw.config b/arch/powerpc/configs/85xx-hw.config
index fa84e8883d09..b83bd1248895 100644
--- a/arch/powerpc/configs/85xx-hw.config
+++ b/arch/powerpc/configs/85xx-hw.config
@@ -125,6 +125,7 @@ CONFIG_SPI_FSL_ESPI=y
 CONFIG_SPI_FSL_SPI=y
 CONFIG_SPI_GPIO=y
 CONFIG_SPI=y
+CONFIG_TERANETICS_PHY=y
 CONFIG_UCC_GETH=y
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD=y

From 3fa647bff31fe7b8818a40742506d47d0dc7f8f5 Mon Sep 17 00:00:00 2001
From: Shaohui Xie <Shaohui.Xie@freescale.com>
Date: Fri, 24 Jul 2015 11:46:33 +0800
Subject: [PATCH 068/140] powerpc/config: enable aquantia PHY

Aquantia PHYs used on platforms such as T2080RDB, T1024RDB.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/configs/85xx-hw.config | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/configs/85xx-hw.config b/arch/powerpc/configs/85xx-hw.config
index b83bd1248895..528ff0e714e6 100644
--- a/arch/powerpc/configs/85xx-hw.config
+++ b/arch/powerpc/configs/85xx-hw.config
@@ -1,3 +1,4 @@
+CONFIG_AQUANTIA_PHY=y
 CONFIG_AT803X_PHY=y
 CONFIG_ATA=y
 CONFIG_BLK_DEV_SD=y

From cf184dc2dd33847f4b211b01d8c7ec0526e6c5e4 Mon Sep 17 00:00:00 2001
From: Jaiprakash Singh <b44839@freescale.com>
Date: Wed, 20 May 2015 21:17:11 -0500
Subject: [PATCH 069/140] fsl_ifc: Change IO accessor based on endianness

IFC IO accressor are set at run time based
on IFC IP registers endianness.IFC node in
DTS file contains information about
endianness.

Signed-off-by: Jaiprakash Singh <b44839@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
---
 .../bindings/memory-controllers/fsl/ifc.txt   |   3 +
 drivers/memory/fsl_ifc.c                      |  43 ++-
 drivers/mtd/nand/fsl_ifc_nand.c               | 256 +++++++++---------
 include/linux/fsl_ifc.h                       |  50 ++++
 4 files changed, 212 insertions(+), 140 deletions(-)

diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt b/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt
index d5e370450ac0..89427b018ba7 100644
--- a/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt
@@ -18,6 +18,8 @@ Properties:
               interrupt (NAND_EVTER_STAT).  If there is only one,
               that interrupt reports both types of event.
 
+- little-endian : If this property is absent, the big-endian mode will
+                  be in use as default for registers.
 
 - ranges : Each range corresponds to a single chipselect, and covers
            the entire access window as configured.
@@ -34,6 +36,7 @@ Example:
 		#size-cells = <1>;
 		reg = <0x0 0xffe1e000 0 0x2000>;
 		interrupts = <16 2 19 2>;
+		little-endian;
 
 		/* NOR, NAND Flashes and CPLD on board */
 		ranges = <0x0 0x0 0x0 0xee000000 0x02000000
diff --git a/drivers/memory/fsl_ifc.c b/drivers/memory/fsl_ifc.c
index 410c39749872..e87459f6d686 100644
--- a/drivers/memory/fsl_ifc.c
+++ b/drivers/memory/fsl_ifc.c
@@ -62,7 +62,7 @@ int fsl_ifc_find(phys_addr_t addr_base)
 		return -ENODEV;
 
 	for (i = 0; i < fsl_ifc_ctrl_dev->banks; i++) {
-		u32 cspr = in_be32(&fsl_ifc_ctrl_dev->regs->cspr_cs[i].cspr);
+		u32 cspr = ifc_in32(&fsl_ifc_ctrl_dev->regs->cspr_cs[i].cspr);
 		if (cspr & CSPR_V && (cspr & CSPR_BA) ==
 				convert_ifc_address(addr_base))
 			return i;
@@ -79,16 +79,16 @@ static int fsl_ifc_ctrl_init(struct fsl_ifc_ctrl *ctrl)
 	/*
 	 * Clear all the common status and event registers
 	 */
-	if (in_be32(&ifc->cm_evter_stat) & IFC_CM_EVTER_STAT_CSER)
-		out_be32(&ifc->cm_evter_stat, IFC_CM_EVTER_STAT_CSER);
+	if (ifc_in32(&ifc->cm_evter_stat) & IFC_CM_EVTER_STAT_CSER)
+		ifc_out32(IFC_CM_EVTER_STAT_CSER, &ifc->cm_evter_stat);
 
 	/* enable all error and events */
-	out_be32(&ifc->cm_evter_en, IFC_CM_EVTER_EN_CSEREN);
+	ifc_out32(IFC_CM_EVTER_EN_CSEREN, &ifc->cm_evter_en);
 
 	/* enable all error and event interrupts */
-	out_be32(&ifc->cm_evter_intr_en, IFC_CM_EVTER_INTR_EN_CSERIREN);
-	out_be32(&ifc->cm_erattr0, 0x0);
-	out_be32(&ifc->cm_erattr1, 0x0);
+	ifc_out32(IFC_CM_EVTER_INTR_EN_CSERIREN, &ifc->cm_evter_intr_en);
+	ifc_out32(0x0, &ifc->cm_erattr0);
+	ifc_out32(0x0, &ifc->cm_erattr1);
 
 	return 0;
 }
@@ -127,9 +127,9 @@ static u32 check_nand_stat(struct fsl_ifc_ctrl *ctrl)
 
 	spin_lock_irqsave(&nand_irq_lock, flags);
 
-	stat = in_be32(&ifc->ifc_nand.nand_evter_stat);
+	stat = ifc_in32(&ifc->ifc_nand.nand_evter_stat);
 	if (stat) {
-		out_be32(&ifc->ifc_nand.nand_evter_stat, stat);
+		ifc_out32(stat, &ifc->ifc_nand.nand_evter_stat);
 		ctrl->nand_stat = stat;
 		wake_up(&ctrl->nand_wait);
 	}
@@ -161,16 +161,16 @@ static irqreturn_t fsl_ifc_ctrl_irq(int irqno, void *data)
 	irqreturn_t ret = IRQ_NONE;
 
 	/* read for chip select error */
-	cs_err = in_be32(&ifc->cm_evter_stat);
+	cs_err = ifc_in32(&ifc->cm_evter_stat);
 	if (cs_err) {
 		dev_err(ctrl->dev, "transaction sent to IFC is not mapped to"
 				"any memory bank 0x%08X\n", cs_err);
 		/* clear the chip select error */
-		out_be32(&ifc->cm_evter_stat, IFC_CM_EVTER_STAT_CSER);
+		ifc_out32(IFC_CM_EVTER_STAT_CSER, &ifc->cm_evter_stat);
 
 		/* read error attribute registers print the error information */
-		status = in_be32(&ifc->cm_erattr0);
-		err_addr = in_be32(&ifc->cm_erattr1);
+		status = ifc_in32(&ifc->cm_erattr0);
+		err_addr = ifc_in32(&ifc->cm_erattr1);
 
 		if (status & IFC_CM_ERATTR0_ERTYP_READ)
 			dev_err(ctrl->dev, "Read transaction error"
@@ -231,6 +231,23 @@ static int fsl_ifc_ctrl_probe(struct platform_device *dev)
 		goto err;
 	}
 
+	version = ifc_in32(&fsl_ifc_ctrl_dev->regs->ifc_rev) &
+			FSL_IFC_VERSION_MASK;
+	banks = (version == FSL_IFC_VERSION_1_0_0) ? 4 : 8;
+	dev_info(&dev->dev, "IFC version %d.%d, %d banks\n",
+		version >> 24, (version >> 16) & 0xf, banks);
+
+	fsl_ifc_ctrl_dev->version = version;
+	fsl_ifc_ctrl_dev->banks = banks;
+
+	if (of_property_read_bool(dev->dev.of_node, "little-endian")) {
+		fsl_ifc_ctrl_dev->little_endian = true;
+		dev_dbg(&dev->dev, "IFC REGISTERS are LITTLE endian\n");
+	} else {
+		fsl_ifc_ctrl_dev->little_endian = false;
+		dev_dbg(&dev->dev, "IFC REGISTERS are BIG endian\n");
+	}
+
 	version = ioread32be(&fsl_ifc_ctrl_dev->regs->ifc_rev) &
 			FSL_IFC_VERSION_MASK;
 	banks = (version == FSL_IFC_VERSION_1_0_0) ? 4 : 8;
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index 51394e59901b..a4e27e891153 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -238,8 +238,8 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob)
 
 	ifc_nand_ctrl->page = page_addr;
 	/* Program ROW0/COL0 */
-	iowrite32be(page_addr, &ifc->ifc_nand.row0);
-	iowrite32be((oob ? IFC_NAND_COL_MS : 0) | column, &ifc->ifc_nand.col0);
+	ifc_out32(page_addr, &ifc->ifc_nand.row0);
+	ifc_out32((oob ? IFC_NAND_COL_MS : 0) | column, &ifc->ifc_nand.col0);
 
 	buf_num = page_addr & priv->bufnum_mask;
 
@@ -301,19 +301,19 @@ static void fsl_ifc_run_command(struct mtd_info *mtd)
 	int i;
 
 	/* set the chip select for NAND Transaction */
-	iowrite32be(priv->bank << IFC_NAND_CSEL_SHIFT,
-		    &ifc->ifc_nand.nand_csel);
+	ifc_out32(priv->bank << IFC_NAND_CSEL_SHIFT,
+		  &ifc->ifc_nand.nand_csel);
 
 	dev_vdbg(priv->dev,
 			"%s: fir0=%08x fcr0=%08x\n",
 			__func__,
-			ioread32be(&ifc->ifc_nand.nand_fir0),
-			ioread32be(&ifc->ifc_nand.nand_fcr0));
+			ifc_in32(&ifc->ifc_nand.nand_fir0),
+			ifc_in32(&ifc->ifc_nand.nand_fcr0));
 
 	ctrl->nand_stat = 0;
 
 	/* start read/write seq */
-	iowrite32be(IFC_NAND_SEQ_STRT_FIR_STRT, &ifc->ifc_nand.nandseq_strt);
+	ifc_out32(IFC_NAND_SEQ_STRT_FIR_STRT, &ifc->ifc_nand.nandseq_strt);
 
 	/* wait for command complete flag or timeout */
 	wait_event_timeout(ctrl->nand_wait, ctrl->nand_stat,
@@ -336,7 +336,7 @@ static void fsl_ifc_run_command(struct mtd_info *mtd)
 		int sector_end = sector + chip->ecc.steps - 1;
 
 		for (i = sector / 4; i <= sector_end / 4; i++)
-			eccstat[i] = ioread32be(&ifc->ifc_nand.nand_eccstat[i]);
+			eccstat[i] = ifc_in32(&ifc->ifc_nand.nand_eccstat[i]);
 
 		for (i = sector; i <= sector_end; i++) {
 			errors = check_read_ecc(mtd, ctrl, eccstat, i);
@@ -376,33 +376,33 @@ static void fsl_ifc_do_read(struct nand_chip *chip,
 
 	/* Program FIR/IFC_NAND_FCR0 for Small/Large page */
 	if (mtd->writesize > 512) {
-		iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
-			    (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
-			    (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
-			    (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) |
-			    (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP4_SHIFT),
-			    &ifc->ifc_nand.nand_fir0);
-		iowrite32be(0x0, &ifc->ifc_nand.nand_fir1);
+		ifc_out32((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+			  (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+			  (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+			  (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) |
+			  (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP4_SHIFT),
+			  &ifc->ifc_nand.nand_fir0);
+		ifc_out32(0x0, &ifc->ifc_nand.nand_fir1);
 
-		iowrite32be((NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) |
-			    (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT),
-			    &ifc->ifc_nand.nand_fcr0);
+		ifc_out32((NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) |
+			  (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT),
+			  &ifc->ifc_nand.nand_fcr0);
 	} else {
-		iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
-			    (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
-			    (IFC_FIR_OP_RA0  << IFC_NAND_FIR0_OP2_SHIFT) |
-			    (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP3_SHIFT),
-			    &ifc->ifc_nand.nand_fir0);
-		iowrite32be(0x0, &ifc->ifc_nand.nand_fir1);
+		ifc_out32((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+			  (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+			  (IFC_FIR_OP_RA0  << IFC_NAND_FIR0_OP2_SHIFT) |
+			  (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP3_SHIFT),
+			  &ifc->ifc_nand.nand_fir0);
+		ifc_out32(0x0, &ifc->ifc_nand.nand_fir1);
 
 		if (oob)
-			iowrite32be(NAND_CMD_READOOB <<
-				    IFC_NAND_FCR0_CMD0_SHIFT,
-				    &ifc->ifc_nand.nand_fcr0);
+			ifc_out32(NAND_CMD_READOOB <<
+				  IFC_NAND_FCR0_CMD0_SHIFT,
+				  &ifc->ifc_nand.nand_fcr0);
 		else
-			iowrite32be(NAND_CMD_READ0 <<
-				    IFC_NAND_FCR0_CMD0_SHIFT,
-				    &ifc->ifc_nand.nand_fcr0);
+			ifc_out32(NAND_CMD_READ0 <<
+				  IFC_NAND_FCR0_CMD0_SHIFT,
+				  &ifc->ifc_nand.nand_fcr0);
 	}
 }
 
@@ -422,7 +422,7 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 	switch (command) {
 	/* READ0 read the entire buffer to use hardware ECC. */
 	case NAND_CMD_READ0:
-		iowrite32be(0, &ifc->ifc_nand.nand_fbcr);
+		ifc_out32(0, &ifc->ifc_nand.nand_fbcr);
 		set_addr(mtd, 0, page_addr, 0);
 
 		ifc_nand_ctrl->read_bytes = mtd->writesize + mtd->oobsize;
@@ -437,7 +437,7 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 
 	/* READOOB reads only the OOB because no ECC is performed. */
 	case NAND_CMD_READOOB:
-		iowrite32be(mtd->oobsize - column, &ifc->ifc_nand.nand_fbcr);
+		ifc_out32(mtd->oobsize - column, &ifc->ifc_nand.nand_fbcr);
 		set_addr(mtd, column, page_addr, 1);
 
 		ifc_nand_ctrl->read_bytes = mtd->writesize + mtd->oobsize;
@@ -453,19 +453,19 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 		if (command == NAND_CMD_PARAM)
 			timing = IFC_FIR_OP_RBCD;
 
-		iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
-			    (IFC_FIR_OP_UA  << IFC_NAND_FIR0_OP1_SHIFT) |
-			    (timing << IFC_NAND_FIR0_OP2_SHIFT),
-			    &ifc->ifc_nand.nand_fir0);
-		iowrite32be(command << IFC_NAND_FCR0_CMD0_SHIFT,
-			    &ifc->ifc_nand.nand_fcr0);
-		iowrite32be(column, &ifc->ifc_nand.row3);
+		ifc_out32((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+			  (IFC_FIR_OP_UA  << IFC_NAND_FIR0_OP1_SHIFT) |
+			  (timing << IFC_NAND_FIR0_OP2_SHIFT),
+			  &ifc->ifc_nand.nand_fir0);
+		ifc_out32(command << IFC_NAND_FCR0_CMD0_SHIFT,
+			  &ifc->ifc_nand.nand_fcr0);
+		ifc_out32(column, &ifc->ifc_nand.row3);
 
 		/*
 		 * although currently it's 8 bytes for READID, we always read
 		 * the maximum 256 bytes(for PARAM)
 		 */
-		iowrite32be(256, &ifc->ifc_nand.nand_fbcr);
+		ifc_out32(256, &ifc->ifc_nand.nand_fbcr);
 		ifc_nand_ctrl->read_bytes = 256;
 
 		set_addr(mtd, 0, 0, 0);
@@ -480,16 +480,16 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 
 	/* ERASE2 uses the block and page address from ERASE1 */
 	case NAND_CMD_ERASE2:
-		iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
-			    (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP1_SHIFT) |
-			    (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP2_SHIFT),
-			    &ifc->ifc_nand.nand_fir0);
+		ifc_out32((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+			  (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+			  (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP2_SHIFT),
+			  &ifc->ifc_nand.nand_fir0);
 
-		iowrite32be((NAND_CMD_ERASE1 << IFC_NAND_FCR0_CMD0_SHIFT) |
-			    (NAND_CMD_ERASE2 << IFC_NAND_FCR0_CMD1_SHIFT),
-			    &ifc->ifc_nand.nand_fcr0);
+		ifc_out32((NAND_CMD_ERASE1 << IFC_NAND_FCR0_CMD0_SHIFT) |
+			  (NAND_CMD_ERASE2 << IFC_NAND_FCR0_CMD1_SHIFT),
+			  &ifc->ifc_nand.nand_fcr0);
 
-		iowrite32be(0, &ifc->ifc_nand.nand_fbcr);
+		ifc_out32(0, &ifc->ifc_nand.nand_fbcr);
 		ifc_nand_ctrl->read_bytes = 0;
 		fsl_ifc_run_command(mtd);
 		return;
@@ -506,19 +506,18 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 				(NAND_CMD_STATUS << IFC_NAND_FCR0_CMD1_SHIFT) |
 				(NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD2_SHIFT);
 
-			iowrite32be(
-				 (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
-				 (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
-				 (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
-				 (IFC_FIR_OP_WBCD  << IFC_NAND_FIR0_OP3_SHIFT) |
-				 (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP4_SHIFT),
-				 &ifc->ifc_nand.nand_fir0);
-			iowrite32be(
-				 (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT) |
-				 (IFC_FIR_OP_RDSTAT <<
-					IFC_NAND_FIR1_OP6_SHIFT) |
-				 (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP7_SHIFT),
-				 &ifc->ifc_nand.nand_fir1);
+			ifc_out32(
+				(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+				(IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+				(IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+				(IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP3_SHIFT) |
+				(IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP4_SHIFT),
+				&ifc->ifc_nand.nand_fir0);
+			ifc_out32(
+				(IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT) |
+				(IFC_FIR_OP_RDSTAT << IFC_NAND_FIR1_OP6_SHIFT) |
+				(IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP7_SHIFT),
+				&ifc->ifc_nand.nand_fir1);
 		} else {
 			nand_fcr0 = ((NAND_CMD_PAGEPROG <<
 					IFC_NAND_FCR0_CMD1_SHIFT) |
@@ -527,20 +526,19 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 				    (NAND_CMD_STATUS <<
 					IFC_NAND_FCR0_CMD3_SHIFT));
 
-			iowrite32be(
+			ifc_out32(
 				(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
 				(IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP1_SHIFT) |
 				(IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP2_SHIFT) |
 				(IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP3_SHIFT) |
 				(IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP4_SHIFT),
 				&ifc->ifc_nand.nand_fir0);
-			iowrite32be(
-				 (IFC_FIR_OP_CMD1 << IFC_NAND_FIR1_OP5_SHIFT) |
-				 (IFC_FIR_OP_CW3 << IFC_NAND_FIR1_OP6_SHIFT) |
-				 (IFC_FIR_OP_RDSTAT <<
-					IFC_NAND_FIR1_OP7_SHIFT) |
-				 (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP8_SHIFT),
-				  &ifc->ifc_nand.nand_fir1);
+			ifc_out32(
+				(IFC_FIR_OP_CMD1 << IFC_NAND_FIR1_OP5_SHIFT) |
+				(IFC_FIR_OP_CW3 << IFC_NAND_FIR1_OP6_SHIFT) |
+				(IFC_FIR_OP_RDSTAT << IFC_NAND_FIR1_OP7_SHIFT) |
+				(IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP8_SHIFT),
+				&ifc->ifc_nand.nand_fir1);
 
 			if (column >= mtd->writesize)
 				nand_fcr0 |=
@@ -555,7 +553,7 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 			column -= mtd->writesize;
 			ifc_nand_ctrl->oob = 1;
 		}
-		iowrite32be(nand_fcr0, &ifc->ifc_nand.nand_fcr0);
+		ifc_out32(nand_fcr0, &ifc->ifc_nand.nand_fcr0);
 		set_addr(mtd, column, page_addr, ifc_nand_ctrl->oob);
 		return;
 	}
@@ -563,24 +561,26 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 	/* PAGEPROG reuses all of the setup from SEQIN and adds the length */
 	case NAND_CMD_PAGEPROG: {
 		if (ifc_nand_ctrl->oob) {
-			iowrite32be(ifc_nand_ctrl->index -
-				    ifc_nand_ctrl->column,
-				    &ifc->ifc_nand.nand_fbcr);
+			ifc_out32(ifc_nand_ctrl->index -
+				  ifc_nand_ctrl->column,
+				  &ifc->ifc_nand.nand_fbcr);
 		} else {
-			iowrite32be(0, &ifc->ifc_nand.nand_fbcr);
+			ifc_out32(0, &ifc->ifc_nand.nand_fbcr);
 		}
 
 		fsl_ifc_run_command(mtd);
 		return;
 	}
 
-	case NAND_CMD_STATUS:
-		iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
-			    (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP1_SHIFT),
-			    &ifc->ifc_nand.nand_fir0);
-		iowrite32be(NAND_CMD_STATUS << IFC_NAND_FCR0_CMD0_SHIFT,
-			    &ifc->ifc_nand.nand_fcr0);
-		iowrite32be(1, &ifc->ifc_nand.nand_fbcr);
+	case NAND_CMD_STATUS: {
+		void __iomem *addr;
+
+		ifc_out32((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+			  (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP1_SHIFT),
+			  &ifc->ifc_nand.nand_fir0);
+		ifc_out32(NAND_CMD_STATUS << IFC_NAND_FCR0_CMD0_SHIFT,
+			  &ifc->ifc_nand.nand_fcr0);
+		ifc_out32(1, &ifc->ifc_nand.nand_fbcr);
 		set_addr(mtd, 0, 0, 0);
 		ifc_nand_ctrl->read_bytes = 1;
 
@@ -590,17 +590,19 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 		 * The chip always seems to report that it is
 		 * write-protected, even when it is not.
 		 */
+		addr = ifc_nand_ctrl->addr;
 		if (chip->options & NAND_BUSWIDTH_16)
-			setbits16(ifc_nand_ctrl->addr, NAND_STATUS_WP);
+			ifc_out16(ifc_in16(addr) | (NAND_STATUS_WP), addr);
 		else
-			setbits8(ifc_nand_ctrl->addr, NAND_STATUS_WP);
+			ifc_out8(ifc_in8(addr) | (NAND_STATUS_WP), addr);
 		return;
+	}
 
 	case NAND_CMD_RESET:
-		iowrite32be(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT,
-			    &ifc->ifc_nand.nand_fir0);
-		iowrite32be(NAND_CMD_RESET << IFC_NAND_FCR0_CMD0_SHIFT,
-			    &ifc->ifc_nand.nand_fcr0);
+		ifc_out32(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT,
+			  &ifc->ifc_nand.nand_fir0);
+		ifc_out32(NAND_CMD_RESET << IFC_NAND_FCR0_CMD0_SHIFT,
+			  &ifc->ifc_nand.nand_fcr0);
 		fsl_ifc_run_command(mtd);
 		return;
 
@@ -658,7 +660,7 @@ static uint8_t fsl_ifc_read_byte(struct mtd_info *mtd)
 	 */
 	if (ifc_nand_ctrl->index < ifc_nand_ctrl->read_bytes) {
 		offset = ifc_nand_ctrl->index++;
-		return in_8(ifc_nand_ctrl->addr + offset);
+		return ifc_in8(ifc_nand_ctrl->addr + offset);
 	}
 
 	dev_err(priv->dev, "%s: beyond end of buffer\n", __func__);
@@ -680,7 +682,7 @@ static uint8_t fsl_ifc_read_byte16(struct mtd_info *mtd)
 	 * next byte.
 	 */
 	if (ifc_nand_ctrl->index < ifc_nand_ctrl->read_bytes) {
-		data = in_be16(ifc_nand_ctrl->addr + ifc_nand_ctrl->index);
+		data = ifc_in16(ifc_nand_ctrl->addr + ifc_nand_ctrl->index);
 		ifc_nand_ctrl->index += 2;
 		return (uint8_t) data;
 	}
@@ -726,18 +728,18 @@ static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip)
 	u32 nand_fsr;
 
 	/* Use READ_STATUS command, but wait for the device to be ready */
-	iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
-		    (IFC_FIR_OP_RDSTAT << IFC_NAND_FIR0_OP1_SHIFT),
-		    &ifc->ifc_nand.nand_fir0);
-	iowrite32be(NAND_CMD_STATUS << IFC_NAND_FCR0_CMD0_SHIFT,
-		    &ifc->ifc_nand.nand_fcr0);
-	iowrite32be(1, &ifc->ifc_nand.nand_fbcr);
+	ifc_out32((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+		  (IFC_FIR_OP_RDSTAT << IFC_NAND_FIR0_OP1_SHIFT),
+		  &ifc->ifc_nand.nand_fir0);
+	ifc_out32(NAND_CMD_STATUS << IFC_NAND_FCR0_CMD0_SHIFT,
+		  &ifc->ifc_nand.nand_fcr0);
+	ifc_out32(1, &ifc->ifc_nand.nand_fbcr);
 	set_addr(mtd, 0, 0, 0);
 	ifc_nand_ctrl->read_bytes = 1;
 
 	fsl_ifc_run_command(mtd);
 
-	nand_fsr = ioread32be(&ifc->ifc_nand.nand_fsr);
+	nand_fsr = ifc_in32(&ifc->ifc_nand.nand_fsr);
 
 	/*
 	 * The chip always seems to report that it is
@@ -829,34 +831,34 @@ static void fsl_ifc_sram_init(struct fsl_ifc_mtd *priv)
 	uint32_t cs = priv->bank;
 
 	/* Save CSOR and CSOR_ext */
-	csor = ioread32be(&ifc->csor_cs[cs].csor);
-	csor_ext = ioread32be(&ifc->csor_cs[cs].csor_ext);
+	csor = ifc_in32(&ifc->csor_cs[cs].csor);
+	csor_ext = ifc_in32(&ifc->csor_cs[cs].csor_ext);
 
 	/* chage PageSize 8K and SpareSize 1K*/
 	csor_8k = (csor & ~(CSOR_NAND_PGS_MASK)) | 0x0018C000;
-	iowrite32be(csor_8k, &ifc->csor_cs[cs].csor);
-	iowrite32be(0x0000400, &ifc->csor_cs[cs].csor_ext);
+	ifc_out32(csor_8k, &ifc->csor_cs[cs].csor);
+	ifc_out32(0x0000400, &ifc->csor_cs[cs].csor_ext);
 
 	/* READID */
-	iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
-		    (IFC_FIR_OP_UA  << IFC_NAND_FIR0_OP1_SHIFT) |
-		    (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT),
-		    &ifc->ifc_nand.nand_fir0);
-	iowrite32be(NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT,
-		    &ifc->ifc_nand.nand_fcr0);
-	iowrite32be(0x0, &ifc->ifc_nand.row3);
+	ifc_out32((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+		  (IFC_FIR_OP_UA  << IFC_NAND_FIR0_OP1_SHIFT) |
+		  (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT),
+		  &ifc->ifc_nand.nand_fir0);
+	ifc_out32(NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT,
+		  &ifc->ifc_nand.nand_fcr0);
+	ifc_out32(0x0, &ifc->ifc_nand.row3);
 
-	iowrite32be(0x0, &ifc->ifc_nand.nand_fbcr);
+	ifc_out32(0x0, &ifc->ifc_nand.nand_fbcr);
 
 	/* Program ROW0/COL0 */
-	iowrite32be(0x0, &ifc->ifc_nand.row0);
-	iowrite32be(0x0, &ifc->ifc_nand.col0);
+	ifc_out32(0x0, &ifc->ifc_nand.row0);
+	ifc_out32(0x0, &ifc->ifc_nand.col0);
 
 	/* set the chip select for NAND Transaction */
-	iowrite32be(cs << IFC_NAND_CSEL_SHIFT, &ifc->ifc_nand.nand_csel);
+	ifc_out32(cs << IFC_NAND_CSEL_SHIFT, &ifc->ifc_nand.nand_csel);
 
 	/* start read seq */
-	iowrite32be(IFC_NAND_SEQ_STRT_FIR_STRT, &ifc->ifc_nand.nandseq_strt);
+	ifc_out32(IFC_NAND_SEQ_STRT_FIR_STRT, &ifc->ifc_nand.nandseq_strt);
 
 	/* wait for command complete flag or timeout */
 	wait_event_timeout(ctrl->nand_wait, ctrl->nand_stat,
@@ -866,8 +868,8 @@ static void fsl_ifc_sram_init(struct fsl_ifc_mtd *priv)
 		printk(KERN_ERR "fsl-ifc: Failed to Initialise SRAM\n");
 
 	/* Restore CSOR and CSOR_ext */
-	iowrite32be(csor, &ifc->csor_cs[cs].csor);
-	iowrite32be(csor_ext, &ifc->csor_cs[cs].csor_ext);
+	ifc_out32(csor, &ifc->csor_cs[cs].csor);
+	ifc_out32(csor_ext, &ifc->csor_cs[cs].csor_ext);
 }
 
 static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
@@ -884,7 +886,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
 
 	/* fill in nand_chip structure */
 	/* set up function call table */
-	if ((ioread32be(&ifc->cspr_cs[priv->bank].cspr)) & CSPR_PORT_SIZE_16)
+	if ((ifc_in32(&ifc->cspr_cs[priv->bank].cspr)) & CSPR_PORT_SIZE_16)
 		chip->read_byte = fsl_ifc_read_byte16;
 	else
 		chip->read_byte = fsl_ifc_read_byte;
@@ -898,13 +900,13 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
 	chip->bbt_td = &bbt_main_descr;
 	chip->bbt_md = &bbt_mirror_descr;
 
-	iowrite32be(0x0, &ifc->ifc_nand.ncfgr);
+	ifc_out32(0x0, &ifc->ifc_nand.ncfgr);
 
 	/* set up nand options */
 	chip->bbt_options = NAND_BBT_USE_FLASH;
 	chip->options = NAND_NO_SUBPAGE_WRITE;
 
-	if (ioread32be(&ifc->cspr_cs[priv->bank].cspr) & CSPR_PORT_SIZE_16) {
+	if (ifc_in32(&ifc->cspr_cs[priv->bank].cspr) & CSPR_PORT_SIZE_16) {
 		chip->read_byte = fsl_ifc_read_byte16;
 		chip->options |= NAND_BUSWIDTH_16;
 	} else {
@@ -917,7 +919,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
 	chip->ecc.read_page = fsl_ifc_read_page;
 	chip->ecc.write_page = fsl_ifc_write_page;
 
-	csor = ioread32be(&ifc->csor_cs[priv->bank].csor);
+	csor = ifc_in32(&ifc->csor_cs[priv->bank].csor);
 
 	/* Hardware generates ECC per 512 Bytes */
 	chip->ecc.size = 512;
@@ -1006,7 +1008,7 @@ static int fsl_ifc_chip_remove(struct fsl_ifc_mtd *priv)
 static int match_bank(struct fsl_ifc_regs __iomem *ifc, int bank,
 		      phys_addr_t addr)
 {
-	u32 cspr = ioread32be(&ifc->cspr_cs[bank].cspr);
+	u32 cspr = ifc_in32(&ifc->cspr_cs[bank].cspr);
 
 	if (!(cspr & CSPR_V))
 		return 0;
@@ -1092,16 +1094,16 @@ static int fsl_ifc_nand_probe(struct platform_device *dev)
 
 	dev_set_drvdata(priv->dev, priv);
 
-	iowrite32be(IFC_NAND_EVTER_EN_OPC_EN |
-		    IFC_NAND_EVTER_EN_FTOER_EN |
-		    IFC_NAND_EVTER_EN_WPER_EN,
-		    &ifc->ifc_nand.nand_evter_en);
+	ifc_out32(IFC_NAND_EVTER_EN_OPC_EN |
+		  IFC_NAND_EVTER_EN_FTOER_EN |
+		  IFC_NAND_EVTER_EN_WPER_EN,
+		  &ifc->ifc_nand.nand_evter_en);
 
 	/* enable NAND Machine Interrupts */
-	iowrite32be(IFC_NAND_EVTER_INTR_OPCIR_EN |
-		    IFC_NAND_EVTER_INTR_FTOERIR_EN |
-		    IFC_NAND_EVTER_INTR_WPERIR_EN,
-		    &ifc->ifc_nand.nand_evter_intr_en);
+	ifc_out32(IFC_NAND_EVTER_INTR_OPCIR_EN |
+		  IFC_NAND_EVTER_INTR_FTOERIR_EN |
+		  IFC_NAND_EVTER_INTR_WPERIR_EN,
+		  &ifc->ifc_nand.nand_evter_intr_en);
 	priv->mtd.name = kasprintf(GFP_KERNEL, "%llx.flash", (u64)res.start);
 	if (!priv->mtd.name) {
 		ret = -ENOMEM;
diff --git a/include/linux/fsl_ifc.h b/include/linux/fsl_ifc.h
index bf0321eabbda..0023088b253b 100644
--- a/include/linux/fsl_ifc.h
+++ b/include/linux/fsl_ifc.h
@@ -841,9 +841,59 @@ struct fsl_ifc_ctrl {
 
 	u32 nand_stat;
 	wait_queue_head_t nand_wait;
+	bool little_endian;
 };
 
 extern struct fsl_ifc_ctrl *fsl_ifc_ctrl_dev;
 
+static inline u32 ifc_in32(void __iomem *addr)
+{
+	u32 val;
+
+	if (fsl_ifc_ctrl_dev->little_endian)
+		val = ioread32(addr);
+	else
+		val = ioread32be(addr);
+
+	return val;
+}
+
+static inline u16 ifc_in16(void __iomem *addr)
+{
+	u16 val;
+
+	if (fsl_ifc_ctrl_dev->little_endian)
+		val = ioread16(addr);
+	else
+		val = ioread16be(addr);
+
+	return val;
+}
+
+static inline u8 ifc_in8(void __iomem *addr)
+{
+	return ioread8(addr);
+}
+
+static inline void ifc_out32(u32 val, void __iomem *addr)
+{
+	if (fsl_ifc_ctrl_dev->little_endian)
+		iowrite32(val, addr);
+	else
+		iowrite32be(val, addr);
+}
+
+static inline void ifc_out16(u16 val, void __iomem *addr)
+{
+	if (fsl_ifc_ctrl_dev->little_endian)
+		iowrite16(val, addr);
+	else
+		iowrite16be(val, addr);
+}
+
+static inline void ifc_out8(u8 val, void __iomem *addr)
+{
+	iowrite8(val, addr);
+}
 
 #endif /* __ASM_FSL_IFC_H */

From 0d61f0b3e222b588480e2ad1e85bb2ea57561c4b Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Sat, 18 Jul 2015 14:24:57 -0500
Subject: [PATCH 070/140] powerpc/booke64: Move mb() to __set_pte_at() with
 kernel-addr test

map_kernel() doesn't catch all places that create kernel PTEs.  In
particular, vmalloc() calls set_pte_at() directly.  This causes a
crash when booting a non-SMP kernel on e6500.

Move the sync to __set_pte(), to be executed only for kernel addresses.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/include/asm/pgtable.h | 11 +++++++++++
 arch/powerpc/mm/pgtable_64.c       | 10 ----------
 2 files changed, 11 insertions(+), 10 deletions(-)

diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index 11a38635dd65..0717693c8428 100644
--- a/arch/powerpc/include/asm/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -169,6 +169,17 @@ static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr,
 	 * cases, and 32-bit non-hash with 32-bit PTEs.
 	 */
 	*ptep = pte;
+
+#ifdef CONFIG_PPC_BOOK3E_64
+	/*
+	 * With hardware tablewalk, a sync is needed to ensure that
+	 * subsequent accesses see the PTE we just wrote.  Unlike userspace
+	 * mappings, we can't tolerate spurious faults, so make sure
+	 * the new PTE will be seen the first time.
+	 */
+	if (is_kernel_addr(addr))
+		mb();
+#endif
 #endif
 }
 
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index 876232d64126..e92cb2146b18 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -149,17 +149,7 @@ int map_kernel_page(unsigned long ea, unsigned long pa, int flags)
 #endif /* !CONFIG_PPC_MMU_NOHASH */
 	}
 
-#ifdef CONFIG_PPC_BOOK3E_64
-	/*
-	 * With hardware tablewalk, a sync is needed to ensure that
-	 * subsequent accesses see the PTE we just wrote.  Unlike userspace
-	 * mappings, we can't tolerate spurious faults, so make sure
-	 * the new PTE will be seen the first time.
-	 */
-	mb();
-#else
 	smp_wmb();
-#endif
 	return 0;
 }
 

From c60232029aee84f69da0e74aa6f6d249edbbc80b Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Sat, 18 Jul 2015 14:24:58 -0500
Subject: [PATCH 071/140] powerpc/fsl: Force coherent memory on e500mc
 derivatives

In CoreNet systems it is not allowed to mix M and non-M mappings to the
same memory, and coherent DMA accesses are considered to be M mappings
for this purpose.  Ignoring this has been observed to cause hard
lockups in non-SMP kernels on e6500.

Furthermore, e6500 implements the LRAT (logical to real address table)
which allows KVM guests to control the WIMGE bits.  This means that
KVM cannot force the M bit on the way it usually does, so the guest had
better set it itself.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/include/asm/pte-common.h         |  3 ++-
 arch/powerpc/kernel/exceptions-64e.S          | 13 ++++++++-----
 arch/powerpc/kernel/fsl_booke_entry_mapping.S | 15 +++++++++------
 arch/powerpc/mm/fsl_booke_mmu.c               |  2 +-
 4 files changed, 20 insertions(+), 13 deletions(-)

diff --git a/arch/powerpc/include/asm/pte-common.h b/arch/powerpc/include/asm/pte-common.h
index b7c8d079c121..71537a319fc8 100644
--- a/arch/powerpc/include/asm/pte-common.h
+++ b/arch/powerpc/include/asm/pte-common.h
@@ -109,7 +109,8 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
  * the processor might need it for DMA coherency.
  */
 #define _PAGE_BASE_NC	(_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_PSIZE)
-#if defined(CONFIG_SMP) || defined(CONFIG_PPC_STD_MMU)
+#if defined(CONFIG_SMP) || defined(CONFIG_PPC_STD_MMU) || \
+	defined(CONFIG_PPC_E500MC)
 #define _PAGE_BASE	(_PAGE_BASE_NC | _PAGE_COHERENT)
 #else
 #define _PAGE_BASE	(_PAGE_BASE_NC)
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 3e68d1c69718..f3bd5e747ed8 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -1313,11 +1313,14 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	sync
 	isync
 
-/* The mapping only needs to be cache-coherent on SMP */
-#ifdef CONFIG_SMP
-#define M_IF_SMP	MAS2_M
+/*
+ * The mapping only needs to be cache-coherent on SMP, except on
+ * Freescale e500mc derivatives where it's also needed for coherent DMA.
+ */
+#if defined(CONFIG_SMP) || defined(CONFIG_PPC_E500MC)
+#define M_IF_NEEDED	MAS2_M
 #else
-#define M_IF_SMP	0
+#define M_IF_NEEDED	0
 #endif
 
 /* 6. Setup KERNELBASE mapping in TLB[0]
@@ -1332,7 +1335,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l
 	mtspr	SPRN_MAS1,r6
 
-	LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET | M_IF_SMP)
+	LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET | M_IF_NEEDED)
 	mtspr	SPRN_MAS2,r6
 
 	rlwinm	r5,r5,0,0,25
diff --git a/arch/powerpc/kernel/fsl_booke_entry_mapping.S b/arch/powerpc/kernel/fsl_booke_entry_mapping.S
index f22e7e44fbf3..83dd0f6776b3 100644
--- a/arch/powerpc/kernel/fsl_booke_entry_mapping.S
+++ b/arch/powerpc/kernel/fsl_booke_entry_mapping.S
@@ -152,11 +152,14 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	tlbivax 0,r9
 	TLBSYNC
 
-/* The mapping only needs to be cache-coherent on SMP */
-#ifdef CONFIG_SMP
-#define M_IF_SMP	MAS2_M
+/*
+ * The mapping only needs to be cache-coherent on SMP, except on
+ * Freescale e500mc derivatives where it's also needed for coherent DMA.
+ */
+#if defined(CONFIG_SMP) || defined(CONFIG_PPC_E500MC)
+#define M_IF_NEEDED	MAS2_M
 #else
-#define M_IF_SMP	0
+#define M_IF_NEEDED	0
 #endif
 
 #if defined(ENTRY_MAPPING_BOOT_SETUP)
@@ -167,8 +170,8 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	lis	r6,(MAS1_VALID|MAS1_IPROT)@h
 	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_64M))@l
 	mtspr	SPRN_MAS1,r6
-	lis	r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@h
-	ori	r6,r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@l
+	lis	r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_NEEDED)@h
+	ori	r6,r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_NEEDED)@l
 	mtspr	SPRN_MAS2,r6
 	mtspr	SPRN_MAS3,r8
 	tlbwe
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index 9c90e66cffb6..354ba3c09ef3 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -112,7 +112,7 @@ static void settlbcam(int index, unsigned long virt, phys_addr_t phys,
 
 	tsize = __ilog2(size) - 10;
 
-#ifdef CONFIG_SMP
+#if defined(CONFIG_SMP) || defined(CONFIG_PPC_E500MC)
 	if ((flags & _PAGE_NO_CACHE) == 0)
 		flags |= _PAGE_COHERENT;
 #endif

From d3d73f4b38a8ece19846b8fa2519cdc8583f35bb Mon Sep 17 00:00:00 2001
From: Daniel Axtens <dja@axtens.net>
Date: Fri, 7 Aug 2015 13:18:17 +1000
Subject: [PATCH 072/140] cxl: Compile with -Werror

It's a good idea, and it brings us in line with the rest of arch/powerpc.

Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/Makefile | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/misc/cxl/Makefile b/drivers/misc/cxl/Makefile
index 14e3f8219a11..6f484dfe78f9 100644
--- a/drivers/misc/cxl/Makefile
+++ b/drivers/misc/cxl/Makefile
@@ -1,3 +1,5 @@
+ccflags-y := -Werror
+
 cxl-y				+= main.o file.o irq.o fault.o native.o
 cxl-y				+= context.o sysfs.o debugfs.o pci.o trace.o
 cxl-y				+= vphb.o api.o

From 3d6b040e73387570521da4aedfd03d2643acdae7 Mon Sep 17 00:00:00 2001
From: Daniel Axtens <dja@axtens.net>
Date: Fri, 7 Aug 2015 13:18:18 +1000
Subject: [PATCH 073/140] cxl: sparse: Make declarations static

A few declarations were identified by sparse as needing to be static:

  drivers/misc/cxl/irq.c:408:6: warning: symbol 'afu_irq_name_free' was not declared. Should it be static?
  drivers/misc/cxl/irq.c:467:6: warning: symbol 'afu_register_hwirqs' was not declared. Should it be static?
  drivers/misc/cxl/file.c:254:6: warning: symbol 'afu_compat_ioctl' was not declared. Should it be static?
  drivers/misc/cxl/file.c:399:30: warning: symbol 'afu_master_fops' was not declared. Should it be static?

Make them static.

Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/file.c | 4 ++--
 drivers/misc/cxl/irq.c  | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/misc/cxl/file.c b/drivers/misc/cxl/file.c
index e3f4b69527a9..c8c8bfa2679b 100644
--- a/drivers/misc/cxl/file.c
+++ b/drivers/misc/cxl/file.c
@@ -251,7 +251,7 @@ long afu_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	return -EINVAL;
 }
 
-long afu_compat_ioctl(struct file *file, unsigned int cmd,
+static long afu_compat_ioctl(struct file *file, unsigned int cmd,
 			     unsigned long arg)
 {
 	return afu_ioctl(file, cmd, arg);
@@ -396,7 +396,7 @@ const struct file_operations afu_fops = {
 	.mmap           = afu_mmap,
 };
 
-const struct file_operations afu_master_fops = {
+static const struct file_operations afu_master_fops = {
 	.owner		= THIS_MODULE,
 	.open           = afu_master_open,
 	.poll		= afu_poll,
diff --git a/drivers/misc/cxl/irq.c b/drivers/misc/cxl/irq.c
index abfce494ca6b..b6b04374c10c 100644
--- a/drivers/misc/cxl/irq.c
+++ b/drivers/misc/cxl/irq.c
@@ -405,7 +405,7 @@ void cxl_release_psl_irq(struct cxl_afu *afu)
 	kfree(afu->psl_irq_name);
 }
 
-void afu_irq_name_free(struct cxl_context *ctx)
+static void afu_irq_name_free(struct cxl_context *ctx)
 {
 	struct cxl_irq_name *irq_name, *tmp;
 
@@ -464,7 +464,7 @@ int afu_allocate_irqs(struct cxl_context *ctx, u32 count)
 	return -ENOMEM;
 }
 
-void afu_register_hwirqs(struct cxl_context *ctx)
+static void afu_register_hwirqs(struct cxl_context *ctx)
 {
 	irq_hw_number_t hwirq;
 	struct cxl_irq_name *irq_name;

From 83c3fee7e78f5a937b734f1ba954c5cdcb2be755 Mon Sep 17 00:00:00 2001
From: Daniel Axtens <dja@axtens.net>
Date: Fri, 7 Aug 2015 13:18:20 +1000
Subject: [PATCH 074/140] cxl: sparse: Silence iomem warning in debugfs file
 creation

An IO address, tagged with __iomem, is passed to debugfs_create_file
as private data. This requires that it be cast to void *. The cast
drops the __iomem annotation and so creates a sparse warning:

  drivers/misc/cxl/debugfs.c:51:57: warning: cast removes address space of expression

The address space marker is added back in the file operations
(fops_io_u64).

Silence the warning with __force.

Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/debugfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/misc/cxl/debugfs.c b/drivers/misc/cxl/debugfs.c
index 825c412580bc..18df6f44af2a 100644
--- a/drivers/misc/cxl/debugfs.c
+++ b/drivers/misc/cxl/debugfs.c
@@ -48,7 +48,7 @@ DEFINE_SIMPLE_ATTRIBUTE(fops_io_x64, debugfs_io_u64_get, debugfs_io_u64_set, "0x
 static struct dentry *debugfs_create_io_x64(const char *name, umode_t mode,
 					    struct dentry *parent, u64 __iomem *value)
 {
-	return debugfs_create_file(name, mode, parent, (void *)value, &fops_io_x64);
+	return debugfs_create_file(name, mode, parent, (void __force *)value, &fops_io_x64);
 }
 
 int cxl_debugfs_adapter_add(struct cxl *adapter)

From 752b8adec4a776b4fdf01cf9443921bb3ba38779 Mon Sep 17 00:00:00 2001
From: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Date: Wed, 29 Jul 2015 12:39:58 +0530
Subject: [PATCH 075/140] powerpc/slb: Remove a duplicate extern variable

This patch just removes one redundant entry for one extern variable
'slb_compare_rr_to_size' from the scope. This patch does not change
any functionality.

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/mm/slb.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 6e450ca66526..62fafb300c2c 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -253,7 +253,6 @@ static inline void patch_slb_encoding(unsigned int *insn_addr,
 	patch_instruction(insn_addr, insn);
 }
 
-extern u32 slb_compare_rr_to_size[];
 extern u32 slb_miss_kernel_load_linear[];
 extern u32 slb_miss_kernel_load_io[];
 extern u32 slb_compare_rr_to_size[];

From 2be682af48e8236558da702fe67e178cfe7524a1 Mon Sep 17 00:00:00 2001
From: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Date: Wed, 29 Jul 2015 12:39:59 +0530
Subject: [PATCH 076/140] powerpc/slb: Rename all the 'slot' occurrences to
 'entry'

The SLB code uses 'slot' and 'entry' interchangeably, change it to always
use 'entry'.

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
[mpe: Rewrite change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/mm/slb.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 62fafb300c2c..faf9f0c4e823 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -41,9 +41,9 @@ static void slb_allocate(unsigned long ea)
 	(((ssize) == MMU_SEGSIZE_256M)? ESID_MASK: ESID_MASK_1T)
 
 static inline unsigned long mk_esid_data(unsigned long ea, int ssize,
-					 unsigned long slot)
+					 unsigned long entry)
 {
-	return (ea & slb_esid_mask(ssize)) | SLB_ESID_V | slot;
+	return (ea & slb_esid_mask(ssize)) | SLB_ESID_V | entry;
 }
 
 static inline unsigned long mk_vsid_data(unsigned long ea, int ssize,
@@ -308,12 +308,11 @@ void slb_initialize(void)
 	lflags = SLB_VSID_KERNEL | linear_llp;
 	vflags = SLB_VSID_KERNEL | vmalloc_llp;
 
-	/* Invalidate the entire SLB (even slot 0) & all the ERATS */
+	/* Invalidate the entire SLB (even entry 0) & all the ERATS */
 	asm volatile("isync":::"memory");
 	asm volatile("slbmte  %0,%0"::"r" (0) : "memory");
 	asm volatile("isync; slbia; isync":::"memory");
 	create_shadowed_slbe(PAGE_OFFSET, mmu_kernel_ssize, lflags, 0);
-
 	create_shadowed_slbe(VMALLOC_START, mmu_kernel_ssize, vflags, 1);
 
 	/* For the boot cpu, we're running on the stack in init_thread_union,

From 79d0be7407955a268bcee5a33e338e14fdc74bfa Mon Sep 17 00:00:00 2001
From: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Date: Wed, 29 Jul 2015 12:40:02 +0530
Subject: [PATCH 077/140] powerpc/slb: Add documentation on runtime patching of
 SLB encoding

This patch adds some documentation to patch_slb_encoding() explaining
how it works.

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
[mpe: Update change log and mention the signedness of the immediate]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/mm/slb.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index faf9f0c4e823..8a32a2be3c53 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -249,7 +249,21 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
 static inline void patch_slb_encoding(unsigned int *insn_addr,
 				      unsigned int immed)
 {
-	int insn = (*insn_addr & 0xffff0000) | immed;
+
+	/*
+	 * This function patches either an li or a cmpldi instruction with
+	 * a new immediate value. This relies on the fact that both li
+	 * (which is actually addi) and cmpldi both take a 16-bit immediate
+	 * value, and it is situated in the same location in the instruction,
+	 * ie. bits 16-31 (Big endian bit order) or the lower 16 bits.
+	 * The signedness of the immediate operand differs between the two
+	 * instructions however this code is only ever patching a small value,
+	 * much less than 1 << 15, so we can get away with it.
+	 * To patch the value we read the existing instruction, clear the
+	 * immediate value, and or in our new value, then write the instruction
+	 * back.
+	 */
+	unsigned int insn = (*insn_addr & 0xffff0000) | immed;
 	patch_instruction(insn_addr, insn);
 }
 

From 9c61f7a0ad6fdff85b0c4c648e0c94947ea05c76 Mon Sep 17 00:00:00 2001
From: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Date: Wed, 29 Jul 2015 12:40:03 +0530
Subject: [PATCH 078/140] powerpc/prom: Simplify the logic to fetch SLB size

The code to fetch the SLB size from the device tree wants to first look
for "slb-size" and then if that's not found "ibm,slb-size".

We can simplify the code by looking for the properties and then if we
find one of them we set mmu_slb_size.

We also change the function name from check_cpu_slb_size() to
init_mmu_slb_size() as the function doesn't check anything, it only
initialises mmu_slb_size.

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
[mpe: Rewrite change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/prom.c | 18 +++++++-----------
 1 file changed, 7 insertions(+), 11 deletions(-)

diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 8b888b12a475..4bb43c09489f 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -218,22 +218,18 @@ static void __init check_cpu_pa_features(unsigned long node)
 }
 
 #ifdef CONFIG_PPC_STD_MMU_64
-static void __init check_cpu_slb_size(unsigned long node)
+static void __init init_mmu_slb_size(unsigned long node)
 {
 	const __be32 *slb_size_ptr;
 
-	slb_size_ptr = of_get_flat_dt_prop(node, "slb-size", NULL);
-	if (slb_size_ptr != NULL) {
+	slb_size_ptr = of_get_flat_dt_prop(node, "slb-size", NULL) ? :
+			of_get_flat_dt_prop(node, "ibm,slb-size", NULL);
+
+	if (slb_size_ptr)
 		mmu_slb_size = be32_to_cpup(slb_size_ptr);
-		return;
-	}
-	slb_size_ptr = of_get_flat_dt_prop(node, "ibm,slb-size", NULL);
-	if (slb_size_ptr != NULL) {
-		mmu_slb_size = be32_to_cpup(slb_size_ptr);
-	}
 }
 #else
-#define check_cpu_slb_size(node) do { } while(0)
+#define init_mmu_slb_size(node) do { } while(0)
 #endif
 
 static struct feature_property {
@@ -380,7 +376,7 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
 
 	check_cpu_feature_properties(node);
 	check_cpu_pa_features(node);
-	check_cpu_slb_size(node);
+	init_mmu_slb_size(node);
 
 #ifdef CONFIG_PPC64
 	if (nthreads > 1)

From 8218a3031c204b20582ba689aaf3bb6d318779d3 Mon Sep 17 00:00:00 2001
From: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Date: Wed, 29 Jul 2015 12:40:04 +0530
Subject: [PATCH 079/140] powerpc/xmon: Drop the valid variable completely in
 dump_segments()

The value of 'valid' is always zero when 'esid' is zero, and if 'esid'
is non-zero then the value of 'valid' is irrelevant because we are using
logical or in the if expression.

In fact 'valid' can be dropped completely from dump_segments() by
simply doing the check with SLB_ESID_V directly in the if.

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
[mpe: Rewrite change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/xmon/xmon.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 7a39f6cb8a3d..6ef1231c6e9c 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -2730,7 +2730,7 @@ static void xmon_print_symbol(unsigned long address, const char *mid,
 void dump_segments(void)
 {
 	int i;
-	unsigned long esid,vsid,valid;
+	unsigned long esid,vsid;
 	unsigned long llp;
 
 	printf("SLB contents of cpu 0x%x\n", smp_processor_id());
@@ -2738,10 +2738,9 @@ void dump_segments(void)
 	for (i = 0; i < mmu_slb_size; i++) {
 		asm volatile("slbmfee  %0,%1" : "=r" (esid) : "r" (i));
 		asm volatile("slbmfev  %0,%1" : "=r" (vsid) : "r" (i));
-		valid = (esid & SLB_ESID_V);
-		if (valid | esid | vsid) {
+		if (esid || vsid) {
 			printf("%02d %016lx %016lx", i, esid, vsid);
-			if (valid) {
+			if (esid & SLB_ESID_V) {
 				llp = vsid & SLB_VSID_LLP;
 				if (vsid & SLB_VSID_B_1T) {
 					printf("  1T  ESID=%9lx  VSID=%13lx LLP:%3lx \n",

From 9afac933433ca71e0f78958a1286a8d3b9de5582 Mon Sep 17 00:00:00 2001
From: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Date: Thu, 6 Aug 2015 18:35:07 +0530
Subject: [PATCH 080/140] powerpc/prom: Use DRCONF flags while processing
 detected LMBs

Replace hard coded values with existing DRCONF flags while procesing
detected LMBs from the device tree. Does not change any functionality.

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/prom.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 4bb43c09489f..bef76c5033e4 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -472,9 +472,10 @@ static int __init early_init_dt_scan_drconf_memory(unsigned long node)
 		flags = of_read_number(&dm[3], 1);
 		/* skip DRC index, pad, assoc. list index, flags */
 		dm += 4;
-		/* skip this block if the reserved bit is set in flags (0x80)
-		   or if the block is not assigned to this partition (0x8) */
-		if ((flags & 0x80) || !(flags & 0x8))
+		/* skip this block if the reserved bit is set in flags
+		   or if the block is not assigned to this partition */
+		if ((flags & DRCONF_MEM_RESERVED) ||
+				!(flags & DRCONF_MEM_ASSIGNED))
 			continue;
 		size = memblock_size;
 		rngs = 1;

From e63dbd16ab7be41f5b66a70f1082242d76dd21d7 Mon Sep 17 00:00:00 2001
From: "Gautham R. Shenoy" <ego@linux.vnet.ibm.com>
Date: Wed, 5 Aug 2015 12:38:31 +0530
Subject: [PATCH 081/140] powerpc: Add an inline function to update POWER8 HID0

Section 3.7 of Version 1.2 of the Power8 Processor User's Manual
prescribes that updates to HID0 be preceded by a SYNC instruction and
followed by an ISYNC instruction (Page 91).

Create an inline function name update_power8_hid0() which follows this
recipe and invoke it from the static split core path.

Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Tested-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/reg.h           | 9 +++++++++
 arch/powerpc/platforms/powernv/subcore.c | 4 ++--
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index bb2758819bc9..aa1cc5f015ee 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -1280,6 +1280,15 @@ struct pt_regs;
 
 extern void ppc_save_regs(struct pt_regs *regs);
 
+static inline void update_power8_hid0(unsigned long hid0)
+{
+	/*
+	 *  The HID0 update on Power8 should at the very least be
+	 *  preceded by a a SYNC instruction followed by an ISYNC
+	 *  instruction
+	 */
+	asm volatile("sync; mtspr %0,%1; isync":: "i"(SPRN_HID0), "r"(hid0));
+}
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_REG_H */
diff --git a/arch/powerpc/platforms/powernv/subcore.c b/arch/powerpc/platforms/powernv/subcore.c
index f60f80ada903..503a73f59359 100644
--- a/arch/powerpc/platforms/powernv/subcore.c
+++ b/arch/powerpc/platforms/powernv/subcore.c
@@ -190,7 +190,7 @@ static void unsplit_core(void)
 
 	hid0 = mfspr(SPRN_HID0);
 	hid0 &= ~HID0_POWER8_DYNLPARDIS;
-	mtspr(SPRN_HID0, hid0);
+	update_power8_hid0(hid0);
 	update_hid_in_slw(hid0);
 
 	while (mfspr(SPRN_HID0) & mask)
@@ -227,7 +227,7 @@ static void split_core(int new_mode)
 	/* Write new mode */
 	hid0  = mfspr(SPRN_HID0);
 	hid0 |= HID0_POWER8_DYNLPARDIS | split_parms[i].value;
-	mtspr(SPRN_HID0, hid0);
+	update_power8_hid0(hid0);
 	update_hid_in_slw(hid0);
 
 	/* Wait for it to happen */

From e642d11bdbfe8eb10116ab3959a2b5d75efda832 Mon Sep 17 00:00:00 2001
From: Daniel Axtens <dja@axtens.net>
Date: Fri, 14 Aug 2015 16:03:19 +1000
Subject: [PATCH 082/140] powerpc/eeh: Probe after unbalanced kref check

In the complete hotplug case, EEH PEs are supposed to be released
and set to NULL. Normally, this is done by eeh_remove_device(),
which is called from pcibios_release_device().

However, if something is holding a kref to the device, it will not
be released, and the PE will remain. eeh_add_device_late() has
a check for this which will explictly destroy the PE in this case.

This check in eeh_add_device_late() occurs after a call to
eeh_ops->probe(). On PowerNV, probe is a pointer to pnv_eeh_probe(),
which will exit without probing if there is an existing PE.

This means that on PowerNV, devices with outstanding krefs will not
be rediscovered by EEH correctly after a complete hotplug. This is
affecting CXL (CAPI) devices in the field.

Put the probe after the kref check so that the PE is destroyed
and affected devices are correctly rediscovered by EEH.

Fixes: d91dafc02f42 ("powerpc/eeh: Delay probing EEH device during hotplug")
Cc: stable@vger.kernel.org
Cc: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/eeh.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index af9b597b10af..8e61d717915e 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -1116,9 +1116,6 @@ void eeh_add_device_late(struct pci_dev *dev)
 		return;
 	}
 
-	if (eeh_has_flag(EEH_PROBE_MODE_DEV))
-		eeh_ops->probe(pdn, NULL);
-
 	/*
 	 * The EEH cache might not be removed correctly because of
 	 * unbalanced kref to the device during unplug time, which
@@ -1142,6 +1139,9 @@ void eeh_add_device_late(struct pci_dev *dev)
 		dev->dev.archdata.edev = NULL;
 	}
 
+	if (eeh_has_flag(EEH_PROBE_MODE_DEV))
+		eeh_ops->probe(pdn, NULL);
+
 	edev->pdev = dev;
 	dev->dev.archdata.edev = edev;
 

From 588b34be20bc3dd7441c108c95039933699467ab Mon Sep 17 00:00:00 2001
From: Daniel Axtens <dja@axtens.net>
Date: Fri, 14 Aug 2015 17:41:17 +1000
Subject: [PATCH 083/140] cxl: Convert MMIO read/write macros to inline
 functions

We're about to make these more complex, so make them functions
first.

Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/cxl.h | 51 +++++++++++++++++++++++++++++-------------
 1 file changed, 35 insertions(+), 16 deletions(-)

diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h
index 4fd66cabde1e..6a93bfbcd826 100644
--- a/drivers/misc/cxl/cxl.h
+++ b/drivers/misc/cxl/cxl.h
@@ -537,10 +537,15 @@ static inline void __iomem *_cxl_p1_addr(struct cxl *cxl, cxl_p1_reg_t reg)
 	return cxl->p1_mmio + cxl_reg_off(reg);
 }
 
-#define cxl_p1_write(cxl, reg, val) \
-	out_be64(_cxl_p1_addr(cxl, reg), val)
-#define cxl_p1_read(cxl, reg) \
-	in_be64(_cxl_p1_addr(cxl, reg))
+static inline void cxl_p1_write(struct cxl *cxl, cxl_p1_reg_t reg, u64 val)
+{
+	out_be64(_cxl_p1_addr(cxl, reg), val);
+}
+
+static inline u64 cxl_p1_read(struct cxl *cxl, cxl_p1_reg_t reg)
+{
+	return in_be64(_cxl_p1_addr(cxl, reg));
+}
 
 static inline void __iomem *_cxl_p1n_addr(struct cxl_afu *afu, cxl_p1n_reg_t reg)
 {
@@ -548,26 +553,40 @@ static inline void __iomem *_cxl_p1n_addr(struct cxl_afu *afu, cxl_p1n_reg_t reg
 	return afu->p1n_mmio + cxl_reg_off(reg);
 }
 
-#define cxl_p1n_write(afu, reg, val) \
-	out_be64(_cxl_p1n_addr(afu, reg), val)
-#define cxl_p1n_read(afu, reg) \
-	in_be64(_cxl_p1n_addr(afu, reg))
+static inline void cxl_p1n_write(struct cxl_afu *afu, cxl_p1n_reg_t reg, u64 val)
+{
+	out_be64(_cxl_p1n_addr(afu, reg), val);
+}
+
+static inline u64 cxl_p1n_read(struct cxl_afu *afu, cxl_p1n_reg_t reg)
+{
+	return in_be64(_cxl_p1n_addr(afu, reg));
+}
 
 static inline void __iomem *_cxl_p2n_addr(struct cxl_afu *afu, cxl_p2n_reg_t reg)
 {
 	return afu->p2n_mmio + cxl_reg_off(reg);
 }
 
-#define cxl_p2n_write(afu, reg, val) \
-	out_be64(_cxl_p2n_addr(afu, reg), val)
-#define cxl_p2n_read(afu, reg) \
-	in_be64(_cxl_p2n_addr(afu, reg))
+static inline void cxl_p2n_write(struct cxl_afu *afu, cxl_p2n_reg_t reg, u64 val)
+{
+	out_be64(_cxl_p2n_addr(afu, reg), val);
+}
 
+static inline u64 cxl_p2n_read(struct cxl_afu *afu, cxl_p2n_reg_t reg)
+{
+	return in_be64(_cxl_p2n_addr(afu, reg));
+}
 
-#define cxl_afu_cr_read64(afu, cr, off) \
-	in_le64((afu)->afu_desc_mmio + (afu)->crs_offset + ((cr) * (afu)->crs_len) + (off))
-#define cxl_afu_cr_read32(afu, cr, off) \
-	in_le32((afu)->afu_desc_mmio + (afu)->crs_offset + ((cr) * (afu)->crs_len) + (off))
+static inline u64 cxl_afu_cr_read64(struct cxl_afu *afu, int cr, u64 off)
+{
+	return in_le64((afu)->afu_desc_mmio + (afu)->crs_offset + ((cr) * (afu)->crs_len) + (off));
+}
+
+static inline u32 cxl_afu_cr_read32(struct cxl_afu *afu, int cr, u64 off)
+{
+	return in_le32((afu)->afu_desc_mmio + (afu)->crs_offset + ((cr) * (afu)->crs_len) + (off));
+}
 u16 cxl_afu_cr_read16(struct cxl_afu *afu, int cr, u64 off);
 u8 cxl_afu_cr_read8(struct cxl_afu *afu, int cr, u64 off);
 

From 0b3f9c757cabad4b8101c5fcddddd029ed5506a6 Mon Sep 17 00:00:00 2001
From: Daniel Axtens <dja@axtens.net>
Date: Fri, 14 Aug 2015 17:41:18 +1000
Subject: [PATCH 084/140] cxl: Drop commands if the PCI channel is not in
 normal state

If the PCI channel has gone down, don't attempt to poke the hardware.

We need to guard every time cxl_whatever_(read|write) is called. This
is because a call to those functions will dereference an offset into an
mmio register, and the mmio mappings get invalidated in the EEH
teardown.

Check in the read/write functions in the header.
We give them the same semantics as usual PCI operations:
 - a write to a channel that is down is ignored.
 - a read from a channel that is down returns all fs.

Also, we try to access the MMIO space of a vPHB device as part of the
PCI disable path. Because that's a read that bypasses most of our usual
checks, we handle it explicitly.

As far as user visible warnings go:
 - Check link state in file ops, return -EIO if down.
 - Be reasonably quiet if there's an error in a teardown path,
   or when we already know the hardware is going down.
 - Throw a big WARN if someone tries to start a CXL operation
   while the card is down. This gives a useful stacktrace for
   debugging whatever is doing that.

Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/context.c |  6 +++-
 drivers/misc/cxl/cxl.h     | 44 ++++++++++++++++++-----
 drivers/misc/cxl/file.c    | 19 ++++++++++
 drivers/misc/cxl/native.c  | 72 ++++++++++++++++++++++++++++++++++++--
 drivers/misc/cxl/vphb.c    | 26 ++++++++++++++
 5 files changed, 155 insertions(+), 12 deletions(-)

diff --git a/drivers/misc/cxl/context.c b/drivers/misc/cxl/context.c
index 1287148629c0..615842115848 100644
--- a/drivers/misc/cxl/context.c
+++ b/drivers/misc/cxl/context.c
@@ -193,7 +193,11 @@ int __detach_context(struct cxl_context *ctx)
 	if (status != STARTED)
 		return -EBUSY;
 
-	WARN_ON(cxl_detach_process(ctx));
+	/* Only warn if we detached while the link was OK.
+	 * If detach fails when hw is down, we don't care.
+	 */
+	WARN_ON(cxl_detach_process(ctx) &&
+		cxl_adapter_link_ok(ctx->afu->adapter));
 	flush_work(&ctx->fault_work); /* Only needed for dedicated process */
 	put_pid(ctx->pid);
 	cxl_ctx_put();
diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h
index 6a93bfbcd826..9b9e89fd02cc 100644
--- a/drivers/misc/cxl/cxl.h
+++ b/drivers/misc/cxl/cxl.h
@@ -531,6 +531,14 @@ struct cxl_process_element {
 	__be32 software_state;
 } __packed;
 
+static inline bool cxl_adapter_link_ok(struct cxl *cxl)
+{
+	struct pci_dev *pdev;
+
+	pdev = to_pci_dev(cxl->dev.parent);
+	return !pci_channel_offline(pdev);
+}
+
 static inline void __iomem *_cxl_p1_addr(struct cxl *cxl, cxl_p1_reg_t reg)
 {
 	WARN_ON(!cpu_has_feature(CPU_FTR_HVMODE));
@@ -539,12 +547,16 @@ static inline void __iomem *_cxl_p1_addr(struct cxl *cxl, cxl_p1_reg_t reg)
 
 static inline void cxl_p1_write(struct cxl *cxl, cxl_p1_reg_t reg, u64 val)
 {
-	out_be64(_cxl_p1_addr(cxl, reg), val);
+	if (likely(cxl_adapter_link_ok(cxl)))
+		out_be64(_cxl_p1_addr(cxl, reg), val);
 }
 
 static inline u64 cxl_p1_read(struct cxl *cxl, cxl_p1_reg_t reg)
 {
-	return in_be64(_cxl_p1_addr(cxl, reg));
+	if (likely(cxl_adapter_link_ok(cxl)))
+		return in_be64(_cxl_p1_addr(cxl, reg));
+	else
+		return ~0ULL;
 }
 
 static inline void __iomem *_cxl_p1n_addr(struct cxl_afu *afu, cxl_p1n_reg_t reg)
@@ -555,12 +567,16 @@ static inline void __iomem *_cxl_p1n_addr(struct cxl_afu *afu, cxl_p1n_reg_t reg
 
 static inline void cxl_p1n_write(struct cxl_afu *afu, cxl_p1n_reg_t reg, u64 val)
 {
-	out_be64(_cxl_p1n_addr(afu, reg), val);
+	if (likely(cxl_adapter_link_ok(afu->adapter)))
+		out_be64(_cxl_p1n_addr(afu, reg), val);
 }
 
 static inline u64 cxl_p1n_read(struct cxl_afu *afu, cxl_p1n_reg_t reg)
 {
-	return in_be64(_cxl_p1n_addr(afu, reg));
+	if (likely(cxl_adapter_link_ok(afu->adapter)))
+		return in_be64(_cxl_p1n_addr(afu, reg));
+	else
+		return ~0ULL;
 }
 
 static inline void __iomem *_cxl_p2n_addr(struct cxl_afu *afu, cxl_p2n_reg_t reg)
@@ -570,22 +586,34 @@ static inline void __iomem *_cxl_p2n_addr(struct cxl_afu *afu, cxl_p2n_reg_t reg
 
 static inline void cxl_p2n_write(struct cxl_afu *afu, cxl_p2n_reg_t reg, u64 val)
 {
-	out_be64(_cxl_p2n_addr(afu, reg), val);
+	if (likely(cxl_adapter_link_ok(afu->adapter)))
+		out_be64(_cxl_p2n_addr(afu, reg), val);
 }
 
 static inline u64 cxl_p2n_read(struct cxl_afu *afu, cxl_p2n_reg_t reg)
 {
-	return in_be64(_cxl_p2n_addr(afu, reg));
+	if (likely(cxl_adapter_link_ok(afu->adapter)))
+		return in_be64(_cxl_p2n_addr(afu, reg));
+	else
+		return ~0ULL;
 }
 
 static inline u64 cxl_afu_cr_read64(struct cxl_afu *afu, int cr, u64 off)
 {
-	return in_le64((afu)->afu_desc_mmio + (afu)->crs_offset + ((cr) * (afu)->crs_len) + (off));
+	if (likely(cxl_adapter_link_ok(afu->adapter)))
+		return in_le64((afu)->afu_desc_mmio + (afu)->crs_offset +
+			       ((cr) * (afu)->crs_len) + (off));
+	else
+		return ~0ULL;
 }
 
 static inline u32 cxl_afu_cr_read32(struct cxl_afu *afu, int cr, u64 off)
 {
-	return in_le32((afu)->afu_desc_mmio + (afu)->crs_offset + ((cr) * (afu)->crs_len) + (off));
+	if (likely(cxl_adapter_link_ok(afu->adapter)))
+		return in_le32((afu)->afu_desc_mmio + (afu)->crs_offset +
+			       ((cr) * (afu)->crs_len) + (off));
+	else
+		return 0xffffffff;
 }
 u16 cxl_afu_cr_read16(struct cxl_afu *afu, int cr, u64 off);
 u8 cxl_afu_cr_read8(struct cxl_afu *afu, int cr, u64 off);
diff --git a/drivers/misc/cxl/file.c b/drivers/misc/cxl/file.c
index c8c8bfa2679b..57bdb473749f 100644
--- a/drivers/misc/cxl/file.c
+++ b/drivers/misc/cxl/file.c
@@ -73,6 +73,11 @@ static int __afu_open(struct inode *inode, struct file *file, bool master)
 	if (!afu->current_mode)
 		goto err_put_afu;
 
+	if (!cxl_adapter_link_ok(adapter)) {
+		rc = -EIO;
+		goto err_put_afu;
+	}
+
 	if (!(ctx = cxl_context_alloc())) {
 		rc = -ENOMEM;
 		goto err_put_afu;
@@ -238,6 +243,9 @@ long afu_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	if (ctx->status == CLOSED)
 		return -EIO;
 
+	if (!cxl_adapter_link_ok(ctx->afu->adapter))
+		return -EIO;
+
 	pr_devel("afu_ioctl\n");
 	switch (cmd) {
 	case CXL_IOCTL_START_WORK:
@@ -265,6 +273,9 @@ int afu_mmap(struct file *file, struct vm_area_struct *vm)
 	if (ctx->status != STARTED)
 		return -EIO;
 
+	if (!cxl_adapter_link_ok(ctx->afu->adapter))
+		return -EIO;
+
 	return cxl_context_iomap(ctx, vm);
 }
 
@@ -309,6 +320,9 @@ ssize_t afu_read(struct file *file, char __user *buf, size_t count,
 	int rc;
 	DEFINE_WAIT(wait);
 
+	if (!cxl_adapter_link_ok(ctx->afu->adapter))
+		return -EIO;
+
 	if (count < CXL_READ_MIN_SIZE)
 		return -EINVAL;
 
@@ -319,6 +333,11 @@ ssize_t afu_read(struct file *file, char __user *buf, size_t count,
 		if (ctx_event_pending(ctx))
 			break;
 
+		if (!cxl_adapter_link_ok(ctx->afu->adapter)) {
+			rc = -EIO;
+			goto out;
+		}
+
 		if (file->f_flags & O_NONBLOCK) {
 			rc = -EAGAIN;
 			goto out;
diff --git a/drivers/misc/cxl/native.c b/drivers/misc/cxl/native.c
index f74ff80266c8..44568dd68bb9 100644
--- a/drivers/misc/cxl/native.c
+++ b/drivers/misc/cxl/native.c
@@ -41,6 +41,13 @@ static int afu_control(struct cxl_afu *afu, u64 command,
 			rc = -EBUSY;
 			goto out;
 		}
+
+		if (!cxl_adapter_link_ok(afu->adapter)) {
+			afu->enabled = enabled;
+			rc = -EIO;
+			goto out;
+		}
+
 		pr_devel_ratelimited("AFU control... (0x%016llx)\n",
 				     AFU_Cntl | command);
 		cpu_relax();
@@ -85,6 +92,10 @@ int __cxl_afu_reset(struct cxl_afu *afu)
 
 int cxl_afu_check_and_enable(struct cxl_afu *afu)
 {
+	if (!cxl_adapter_link_ok(afu->adapter)) {
+		WARN(1, "Refusing to enable afu while link down!\n");
+		return -EIO;
+	}
 	if (afu->enabled)
 		return 0;
 	return afu_enable(afu);
@@ -103,6 +114,12 @@ int cxl_psl_purge(struct cxl_afu *afu)
 
 	pr_devel("PSL purge request\n");
 
+	if (!cxl_adapter_link_ok(afu->adapter)) {
+		dev_warn(&afu->dev, "PSL Purge called with link down, ignoring\n");
+		rc = -EIO;
+		goto out;
+	}
+
 	if ((AFU_Cntl & CXL_AFU_Cntl_An_ES_MASK) != CXL_AFU_Cntl_An_ES_Disabled) {
 		WARN(1, "psl_purge request while AFU not disabled!\n");
 		cxl_afu_disable(afu);
@@ -119,6 +136,11 @@ int cxl_psl_purge(struct cxl_afu *afu)
 			rc = -EBUSY;
 			goto out;
 		}
+		if (!cxl_adapter_link_ok(afu->adapter)) {
+			rc = -EIO;
+			goto out;
+		}
+
 		dsisr = cxl_p2n_read(afu, CXL_PSL_DSISR_An);
 		pr_devel_ratelimited("PSL purging... PSL_CNTL: 0x%016llx  PSL_DSISR: 0x%016llx\n", PSL_CNTL, dsisr);
 		if (dsisr & CXL_PSL_DSISR_TRANS) {
@@ -215,6 +237,8 @@ int cxl_tlb_slb_invalidate(struct cxl *adapter)
 			dev_warn(&adapter->dev, "WARNING: CXL adapter wide TLBIA timed out!\n");
 			return -EBUSY;
 		}
+		if (!cxl_adapter_link_ok(adapter))
+			return -EIO;
 		cpu_relax();
 	}
 
@@ -224,6 +248,8 @@ int cxl_tlb_slb_invalidate(struct cxl *adapter)
 			dev_warn(&adapter->dev, "WARNING: CXL adapter wide SLBIA timed out!\n");
 			return -EBUSY;
 		}
+		if (!cxl_adapter_link_ok(adapter))
+			return -EIO;
 		cpu_relax();
 	}
 	return 0;
@@ -240,6 +266,11 @@ int cxl_afu_slbia(struct cxl_afu *afu)
 			dev_warn(&afu->dev, "WARNING: CXL AFU SLBIA timed out!\n");
 			return -EBUSY;
 		}
+		/* If the adapter has gone down, we can assume that we
+		 * will PERST it and that will invalidate everything.
+		 */
+		if (!cxl_adapter_link_ok(afu->adapter))
+			return -EIO;
 		cpu_relax();
 	}
 	return 0;
@@ -279,6 +310,8 @@ static void slb_invalid(struct cxl_context *ctx)
 	cxl_p1_write(adapter, CXL_PSL_SLBIA, CXL_TLB_SLB_IQ_LPIDPID);
 
 	while (1) {
+		if (!cxl_adapter_link_ok(adapter))
+			break;
 		slbia = cxl_p1_read(adapter, CXL_PSL_SLBIA);
 		if (!(slbia & CXL_TLB_SLB_P))
 			break;
@@ -308,6 +341,11 @@ static int do_process_element_cmd(struct cxl_context *ctx,
 			rc = -EBUSY;
 			goto out;
 		}
+		if (!cxl_adapter_link_ok(ctx->afu->adapter)) {
+			dev_warn(&ctx->afu->dev, "WARNING: Device link down, aborting Process Element Command!\n");
+			rc = -EIO;
+			goto out;
+		}
 		state = be64_to_cpup(ctx->afu->sw_command_status);
 		if (state == ~0ULL) {
 			pr_err("cxl: Error adding process element to AFU\n");
@@ -355,8 +393,13 @@ static int terminate_process_element(struct cxl_context *ctx)
 
 	mutex_lock(&ctx->afu->spa_mutex);
 	pr_devel("%s Terminate pe: %i started\n", __func__, ctx->pe);
-	rc = do_process_element_cmd(ctx, CXL_SPA_SW_CMD_TERMINATE,
-				    CXL_PE_SOFTWARE_STATE_V | CXL_PE_SOFTWARE_STATE_T);
+	/* We could be asked to terminate when the hw is down. That
+	 * should always succeed: it's not running if the hw has gone
+	 * away and is being reset.
+	 */
+	if (cxl_adapter_link_ok(ctx->afu->adapter))
+		rc = do_process_element_cmd(ctx, CXL_SPA_SW_CMD_TERMINATE,
+					    CXL_PE_SOFTWARE_STATE_V | CXL_PE_SOFTWARE_STATE_T);
 	ctx->elem->software_state = 0;	/* Remove Valid bit */
 	pr_devel("%s Terminate pe: %i finished\n", __func__, ctx->pe);
 	mutex_unlock(&ctx->afu->spa_mutex);
@@ -369,7 +412,14 @@ static int remove_process_element(struct cxl_context *ctx)
 
 	mutex_lock(&ctx->afu->spa_mutex);
 	pr_devel("%s Remove pe: %i started\n", __func__, ctx->pe);
-	if (!(rc = do_process_element_cmd(ctx, CXL_SPA_SW_CMD_REMOVE, 0)))
+
+	/* We could be asked to remove when the hw is down. Again, if
+	 * the hw is down, the PE is gone, so we succeed.
+	 */
+	if (cxl_adapter_link_ok(ctx->afu->adapter))
+		rc = do_process_element_cmd(ctx, CXL_SPA_SW_CMD_REMOVE, 0);
+
+	if (!rc)
 		ctx->pe_inserted = false;
 	slb_invalid(ctx);
 	pr_devel("%s Remove pe: %i finished\n", __func__, ctx->pe);
@@ -612,6 +662,11 @@ int cxl_afu_activate_mode(struct cxl_afu *afu, int mode)
 	if (!(mode & afu->modes_supported))
 		return -EINVAL;
 
+	if (!cxl_adapter_link_ok(afu->adapter)) {
+		WARN(1, "Device link is down, refusing to activate!\n");
+		return -EIO;
+	}
+
 	if (mode == CXL_MODE_DIRECTED)
 		return activate_afu_directed(afu);
 	if (mode == CXL_MODE_DEDICATED)
@@ -622,6 +677,11 @@ int cxl_afu_activate_mode(struct cxl_afu *afu, int mode)
 
 int cxl_attach_process(struct cxl_context *ctx, bool kernel, u64 wed, u64 amr)
 {
+	if (!cxl_adapter_link_ok(ctx->afu->adapter)) {
+		WARN(1, "Device link is down, refusing to attach process!\n");
+		return -EIO;
+	}
+
 	ctx->kernel = kernel;
 	if (ctx->afu->current_mode == CXL_MODE_DIRECTED)
 		return attach_afu_directed(ctx, wed, amr);
@@ -666,6 +726,12 @@ int cxl_get_irq(struct cxl_afu *afu, struct cxl_irq_info *info)
 {
 	u64 pidtid;
 
+	/* If the adapter has gone away, we can't get any meaningful
+	 * information.
+	 */
+	if (!cxl_adapter_link_ok(afu->adapter))
+		return -EIO;
+
 	info->dsisr = cxl_p2n_read(afu, CXL_PSL_DSISR_An);
 	info->dar = cxl_p2n_read(afu, CXL_PSL_DAR_An);
 	info->dsr = cxl_p2n_read(afu, CXL_PSL_DSR_An);
diff --git a/drivers/misc/cxl/vphb.c b/drivers/misc/cxl/vphb.c
index 2eba002b580b..2930911c1e42 100644
--- a/drivers/misc/cxl/vphb.c
+++ b/drivers/misc/cxl/vphb.c
@@ -138,6 +138,26 @@ static int cxl_pcie_config_info(struct pci_bus *bus, unsigned int devfn,
 	return 0;
 }
 
+
+static inline bool cxl_config_link_ok(struct pci_bus *bus)
+{
+	struct pci_controller *phb;
+	struct cxl_afu *afu;
+
+	/* Config space IO is based on phb->cfg_addr, which is based on
+	 * afu_desc_mmio. This isn't safe to read/write when the link
+	 * goes down, as EEH tears down MMIO space.
+	 *
+	 * Check if the link is OK before proceeding.
+	 */
+
+	phb = pci_bus_to_host(bus);
+	if (phb == NULL)
+		return false;
+	afu = (struct cxl_afu *)phb->private_data;
+	return cxl_adapter_link_ok(afu->adapter);
+}
+
 static int cxl_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
 				int offset, int len, u32 *val)
 {
@@ -150,6 +170,9 @@ static int cxl_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
 	if (rc)
 		return rc;
 
+	if (!cxl_config_link_ok(bus))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
 	/* Can only read 32 bits */
 	*val = (in_le32(ioaddr) >> shift) & mask;
 	return PCIBIOS_SUCCESSFUL;
@@ -167,6 +190,9 @@ static int cxl_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
 	if (rc)
 		return rc;
 
+	if (!cxl_config_link_ok(bus))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
 	/* Can only write 32 bits so do read-modify-write */
 	mask <<= shift;
 	val <<= shift;

From 05155772f642a5b0e421adf2017f993759bf7f95 Mon Sep 17 00:00:00 2001
From: Daniel Axtens <dja@axtens.net>
Date: Fri, 14 Aug 2015 17:41:19 +1000
Subject: [PATCH 085/140] cxl: Allocate and release the SPA with the AFU

Previously the SPA was allocated and freed upon entering and leaving
AFU-directed mode. This causes some issues for error recovery - contexts
hold a pointer inside the SPA, and they may persist after the AFU has
been detached.

We would ideally like to allocate the SPA when the AFU is allocated, and
release it until the AFU is released. However, we don't know how big the
SPA needs to be until we read the AFU descriptor.

Therefore, restructure the code:

 - Allocate the SPA only once, on the first attach.

 - Release the SPA only when the entire AFU is being released (not
   detached). Guard the release with a NULL check, so we don't free
   if it was never allocated (e.g. dedicated mode)

Acked-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/cxl.h    |  3 +++
 drivers/misc/cxl/native.c | 33 ++++++++++++++++++++++-----------
 drivers/misc/cxl/pci.c    |  2 ++
 3 files changed, 27 insertions(+), 11 deletions(-)

diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h
index 9b9e89fd02cc..d540542f9931 100644
--- a/drivers/misc/cxl/cxl.h
+++ b/drivers/misc/cxl/cxl.h
@@ -632,6 +632,9 @@ void unregister_cxl_calls(struct cxl_calls *calls);
 int cxl_alloc_adapter_nr(struct cxl *adapter);
 void cxl_remove_adapter_nr(struct cxl *adapter);
 
+int cxl_alloc_spa(struct cxl_afu *afu);
+void cxl_release_spa(struct cxl_afu *afu);
+
 int cxl_file_init(void);
 void cxl_file_exit(void);
 int cxl_register_adapter(struct cxl *adapter);
diff --git a/drivers/misc/cxl/native.c b/drivers/misc/cxl/native.c
index 44568dd68bb9..b37f2e8004f5 100644
--- a/drivers/misc/cxl/native.c
+++ b/drivers/misc/cxl/native.c
@@ -183,10 +183,8 @@ static int spa_max_procs(int spa_size)
 	return ((spa_size / 8) - 96) / 17;
 }
 
-static int alloc_spa(struct cxl_afu *afu)
+int cxl_alloc_spa(struct cxl_afu *afu)
 {
-	u64 spap;
-
 	/* Work out how many pages to allocate */
 	afu->spa_order = 0;
 	do {
@@ -205,6 +203,13 @@ static int alloc_spa(struct cxl_afu *afu)
 	pr_devel("spa pages: %i afu->spa_max_procs: %i   afu->num_procs: %i\n",
 		 1<<afu->spa_order, afu->spa_max_procs, afu->num_procs);
 
+	return 0;
+}
+
+static void attach_spa(struct cxl_afu *afu)
+{
+	u64 spap;
+
 	afu->sw_command_status = (__be64 *)((char *)afu->spa +
 					    ((afu->spa_max_procs + 3) * 128));
 
@@ -213,14 +218,19 @@ static int alloc_spa(struct cxl_afu *afu)
 	spap |= CXL_PSL_SPAP_V;
 	pr_devel("cxl: SPA allocated at 0x%p. Max processes: %i, sw_command_status: 0x%p CXL_PSL_SPAP_An=0x%016llx\n", afu->spa, afu->spa_max_procs, afu->sw_command_status, spap);
 	cxl_p1n_write(afu, CXL_PSL_SPAP_An, spap);
-
-	return 0;
 }
 
-static void release_spa(struct cxl_afu *afu)
+static inline void detach_spa(struct cxl_afu *afu)
 {
 	cxl_p1n_write(afu, CXL_PSL_SPAP_An, 0);
-	free_pages((unsigned long) afu->spa, afu->spa_order);
+}
+
+void cxl_release_spa(struct cxl_afu *afu)
+{
+	if (afu->spa) {
+		free_pages((unsigned long) afu->spa, afu->spa_order);
+		afu->spa = NULL;
+	}
 }
 
 int cxl_tlb_slb_invalidate(struct cxl *adapter)
@@ -447,8 +457,11 @@ static int activate_afu_directed(struct cxl_afu *afu)
 
 	dev_info(&afu->dev, "Activating AFU directed mode\n");
 
-	if (alloc_spa(afu))
-		return -ENOMEM;
+	if (afu->spa == NULL) {
+		if (cxl_alloc_spa(afu))
+			return -ENOMEM;
+	}
+	attach_spa(afu);
 
 	cxl_p1n_write(afu, CXL_PSL_SCNTL_An, CXL_PSL_SCNTL_An_PM_AFU);
 	cxl_p1n_write(afu, CXL_PSL_AMOR_An, 0xFFFFFFFFFFFFFFFFULL);
@@ -559,8 +572,6 @@ static int deactivate_afu_directed(struct cxl_afu *afu)
 	cxl_afu_disable(afu);
 	cxl_psl_purge(afu);
 
-	release_spa(afu);
-
 	return 0;
 }
 
diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index 1d314f1f95fe..dc26cdd653ad 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -552,6 +552,8 @@ static void cxl_release_afu(struct device *dev)
 	pr_devel("cxl_release_afu\n");
 
 	idr_destroy(&afu->contexts_idr);
+	cxl_release_spa(afu);
+
 	kfree(afu);
 }
 

From e640d2fc811ff8cc1451f92490d3ccc2adcad179 Mon Sep 17 00:00:00 2001
From: Daniel Axtens <dja@axtens.net>
Date: Fri, 14 Aug 2015 17:41:20 +1000
Subject: [PATCH 086/140] cxl: Make IRQ release idempotent

Check if an IRQ is mapped before releasing it.

This will simplify future EEH code by allowing unconditional unmapping
of IRQs.

Acked-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/irq.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/misc/cxl/irq.c b/drivers/misc/cxl/irq.c
index b6b04374c10c..62823784f68e 100644
--- a/drivers/misc/cxl/irq.c
+++ b/drivers/misc/cxl/irq.c
@@ -341,6 +341,9 @@ int cxl_register_psl_err_irq(struct cxl *adapter)
 
 void cxl_release_psl_err_irq(struct cxl *adapter)
 {
+	if (adapter->err_virq != irq_find_mapping(NULL, adapter->err_hwirq))
+		return;
+
 	cxl_p1_write(adapter, CXL_PSL_ErrIVTE, 0x0000000000000000);
 	cxl_unmap_irq(adapter->err_virq, adapter);
 	cxl_release_one_irq(adapter, adapter->err_hwirq);
@@ -374,6 +377,9 @@ int cxl_register_serr_irq(struct cxl_afu *afu)
 
 void cxl_release_serr_irq(struct cxl_afu *afu)
 {
+	if (afu->serr_virq != irq_find_mapping(NULL, afu->serr_hwirq))
+		return;
+
 	cxl_p1n_write(afu, CXL_PSL_SERR_An, 0x0000000000000000);
 	cxl_unmap_irq(afu->serr_virq, afu);
 	cxl_release_one_irq(afu->adapter, afu->serr_hwirq);
@@ -400,6 +406,9 @@ int cxl_register_psl_irq(struct cxl_afu *afu)
 
 void cxl_release_psl_irq(struct cxl_afu *afu)
 {
+	if (afu->psl_virq != irq_find_mapping(NULL, afu->psl_hwirq))
+		return;
+
 	cxl_unmap_irq(afu->psl_virq, afu);
 	cxl_release_one_irq(afu->adapter, afu->psl_hwirq);
 	kfree(afu->psl_irq_name);

From 575e6986f028711287fbbf250e5289a089bac8cb Mon Sep 17 00:00:00 2001
From: Daniel Axtens <dja@axtens.net>
Date: Fri, 14 Aug 2015 17:41:21 +1000
Subject: [PATCH 087/140] cxl: Clean up adapter MMIO unmap path.

- MMIO pointer unmapping is guarded by a null pointer check.
   However, iounmap doesn't null the pointer, just invalidate it.
   Therefore, explicitly null the pointer after unmapping.

 - afu_desc_mmio also needs to be unmapped.

 - PCI regions are allocated in cxl_map_adapter_regs.
   Therefore they should be released in unmap, not elsewhere.

Acked-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/pci.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index dc26cdd653ad..1dae1db3166d 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -539,10 +539,18 @@ static int cxl_map_slice_regs(struct cxl_afu *afu, struct cxl *adapter, struct p
 
 static void cxl_unmap_slice_regs(struct cxl_afu *afu)
 {
-	if (afu->p2n_mmio)
+	if (afu->p2n_mmio) {
 		iounmap(afu->p2n_mmio);
-	if (afu->p1n_mmio)
+		afu->p2n_mmio = NULL;
+	}
+	if (afu->p1n_mmio) {
 		iounmap(afu->p1n_mmio);
+		afu->p1n_mmio = NULL;
+	}
+	if (afu->afu_desc_mmio) {
+		iounmap(afu->afu_desc_mmio);
+		afu->afu_desc_mmio = NULL;
+	}
 }
 
 static void cxl_release_afu(struct device *dev)
@@ -920,10 +928,16 @@ static int cxl_map_adapter_regs(struct cxl *adapter, struct pci_dev *dev)
 
 static void cxl_unmap_adapter_regs(struct cxl *adapter)
 {
-	if (adapter->p1_mmio)
+	if (adapter->p1_mmio) {
 		iounmap(adapter->p1_mmio);
-	if (adapter->p2_mmio)
+		adapter->p1_mmio = NULL;
+		pci_release_region(to_pci_dev(adapter->dev.parent), 2);
+	}
+	if (adapter->p2_mmio) {
 		iounmap(adapter->p2_mmio);
+		adapter->p2_mmio = NULL;
+		pci_release_region(to_pci_dev(adapter->dev.parent), 0);
+	}
 }
 
 static int cxl_read_vsec(struct cxl *adapter, struct pci_dev *dev)
@@ -1132,8 +1146,6 @@ static void cxl_remove_adapter(struct cxl *adapter)
 
 	device_unregister(&adapter->dev);
 
-	pci_release_region(pdev, 0);
-	pci_release_region(pdev, 2);
 	pci_disable_device(pdev);
 }
 

From c044c4154247372c86b468644de88a4e48f903e9 Mon Sep 17 00:00:00 2001
From: Daniel Axtens <dja@axtens.net>
Date: Fri, 14 Aug 2015 17:41:22 +1000
Subject: [PATCH 088/140] cxl: Refactor adaptor init/teardown

Some aspects of initialisation are done only once in the lifetime of
an adapter: for example, allocating memory for the adapter,
allocating the adapter number, or setting up sysfs/debugfs files.

However, we may want to be able to do some parts of the
initialisation multiple times: for example, in error recovery we
want to be able to tear down and then re-map IO memory and IRQs.

Therefore, refactor CXL init/teardown as follows.

 - Keep the overarching functions 'cxl_init_adapter' and its pair,
   'cxl_remove_adapter'.

 - Move all 'once only' allocation/freeing steps to the existing
   'cxl_alloc_adapter' function, and its pair 'cxl_release_adapter'
   (This involves moving allocation of the adapter number out of
   cxl_init_adapter.)

 - Create two new functions: 'cxl_configure_adapter', and its pair
   'cxl_deconfigure_adapter'. These two functions 'wire up' the
   hardware --- they (de)configure resources that do not need to
   last the entire lifetime of the adapter

Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/pci.c | 139 +++++++++++++++++++++++++----------------
 1 file changed, 86 insertions(+), 53 deletions(-)

diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index 1dae1db3166d..feec4800e922 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -966,7 +966,6 @@ static int cxl_read_vsec(struct cxl *adapter, struct pci_dev *dev)
 	CXL_READ_VSEC_BASE_IMAGE(dev, vsec, &adapter->base_image);
 	CXL_READ_VSEC_IMAGE_STATE(dev, vsec, &image_state);
 	adapter->user_image_loaded = !!(image_state & CXL_VSEC_USER_IMAGE_LOADED);
-	adapter->perst_loads_image = true;
 	adapter->perst_select_user = !!(image_state & CXL_VSEC_USER_IMAGE_LOADED);
 
 	CXL_READ_VSEC_NAFUS(dev, vsec, &adapter->slices);
@@ -1026,22 +1025,33 @@ static void cxl_release_adapter(struct device *dev)
 
 	pr_devel("cxl_release_adapter\n");
 
+	cxl_remove_adapter_nr(adapter);
+
 	kfree(adapter);
 }
 
-static struct cxl *cxl_alloc_adapter(struct pci_dev *dev)
+static struct cxl *cxl_alloc_adapter(void)
 {
 	struct cxl *adapter;
 
 	if (!(adapter = kzalloc(sizeof(struct cxl), GFP_KERNEL)))
 		return NULL;
 
-	adapter->dev.parent = &dev->dev;
-	adapter->dev.release = cxl_release_adapter;
-	pci_set_drvdata(dev, adapter);
 	spin_lock_init(&adapter->afu_list_lock);
 
+	if (cxl_alloc_adapter_nr(adapter))
+		goto err1;
+
+	if (dev_set_name(&adapter->dev, "card%i", adapter->adapter_num))
+		goto err2;
+
 	return adapter;
+
+err2:
+	cxl_remove_adapter_nr(adapter);
+err1:
+	kfree(adapter);
+	return NULL;
 }
 
 static int sanitise_adapter_regs(struct cxl *adapter)
@@ -1050,57 +1060,96 @@ static int sanitise_adapter_regs(struct cxl *adapter)
 	return cxl_tlb_slb_invalidate(adapter);
 }
 
-static struct cxl *cxl_init_adapter(struct pci_dev *dev)
+/* This should contain *only* operations that can safely be done in
+ * both creation and recovery.
+ */
+static int cxl_configure_adapter(struct cxl *adapter, struct pci_dev *dev)
 {
-	struct cxl *adapter;
-	bool free = true;
 	int rc;
 
+	adapter->dev.parent = &dev->dev;
+	adapter->dev.release = cxl_release_adapter;
+	pci_set_drvdata(dev, adapter);
 
-	if (!(adapter = cxl_alloc_adapter(dev)))
-		return ERR_PTR(-ENOMEM);
+	rc = pci_enable_device(dev);
+	if (rc) {
+		dev_err(&dev->dev, "pci_enable_device failed: %i\n", rc);
+		return rc;
+	}
 
 	if ((rc = cxl_read_vsec(adapter, dev)))
-		goto err1;
+		return rc;
 
 	if ((rc = cxl_vsec_looks_ok(adapter, dev)))
-		goto err1;
+	        return rc;
 
 	if ((rc = setup_cxl_bars(dev)))
-		goto err1;
+		return rc;
 
 	if ((rc = switch_card_to_cxl(dev)))
-		goto err1;
-
-	if ((rc = cxl_alloc_adapter_nr(adapter)))
-		goto err1;
-
-	if ((rc = dev_set_name(&adapter->dev, "card%i", adapter->adapter_num)))
-		goto err2;
+		return rc;
 
 	if ((rc = cxl_update_image_control(adapter)))
-		goto err2;
+		return rc;
 
 	if ((rc = cxl_map_adapter_regs(adapter, dev)))
-		goto err2;
+		return rc;
 
 	if ((rc = sanitise_adapter_regs(adapter)))
-		goto err2;
+		goto err;
 
 	if ((rc = init_implementation_adapter_regs(adapter, dev)))
-		goto err3;
+		goto err;
 
 	if ((rc = pnv_phb_to_cxl_mode(dev, OPAL_PHB_CAPI_MODE_CAPI)))
-		goto err3;
+		goto err;
 
 	/* If recovery happened, the last step is to turn on snooping.
 	 * In the non-recovery case this has no effect */
-	if ((rc = pnv_phb_to_cxl_mode(dev, OPAL_PHB_CAPI_MODE_SNOOP_ON))) {
-		goto err3;
-	}
+	if ((rc = pnv_phb_to_cxl_mode(dev, OPAL_PHB_CAPI_MODE_SNOOP_ON)))
+		goto err;
 
 	if ((rc = cxl_register_psl_err_irq(adapter)))
-		goto err3;
+		goto err;
+
+	return 0;
+
+err:
+	cxl_unmap_adapter_regs(adapter);
+	return rc;
+
+}
+
+static void cxl_deconfigure_adapter(struct cxl *adapter)
+{
+	struct pci_dev *pdev = to_pci_dev(adapter->dev.parent);
+
+	cxl_release_psl_err_irq(adapter);
+	cxl_unmap_adapter_regs(adapter);
+
+	pci_disable_device(pdev);
+}
+
+static struct cxl *cxl_init_adapter(struct pci_dev *dev)
+{
+	struct cxl *adapter;
+	int rc;
+
+	adapter = cxl_alloc_adapter();
+	if (!adapter)
+		return ERR_PTR(-ENOMEM);
+
+	/* Set defaults for parameters which need to persist over
+	 * configure/reconfigure
+	 */
+	adapter->perst_loads_image = true;
+
+	rc = cxl_configure_adapter(adapter, dev);
+	if (rc) {
+		pci_disable_device(dev);
+		cxl_release_adapter(&adapter->dev);
+		return ERR_PTR(rc);
+	}
 
 	/* Don't care if this one fails: */
 	cxl_debugfs_adapter_add(adapter);
@@ -1118,35 +1167,25 @@ static struct cxl *cxl_init_adapter(struct pci_dev *dev)
 	return adapter;
 
 err_put1:
-	device_unregister(&adapter->dev);
-	free = false;
+	/* This should mirror cxl_remove_adapter, except without the
+	 * sysfs parts
+	 */
 	cxl_debugfs_adapter_remove(adapter);
-	cxl_release_psl_err_irq(adapter);
-err3:
-	cxl_unmap_adapter_regs(adapter);
-err2:
-	cxl_remove_adapter_nr(adapter);
-err1:
-	if (free)
-		kfree(adapter);
+	cxl_deconfigure_adapter(adapter);
+	device_unregister(&adapter->dev);
 	return ERR_PTR(rc);
 }
 
 static void cxl_remove_adapter(struct cxl *adapter)
 {
-	struct pci_dev *pdev = to_pci_dev(adapter->dev.parent);
-
-	pr_devel("cxl_release_adapter\n");
+	pr_devel("cxl_remove_adapter\n");
 
 	cxl_sysfs_adapter_remove(adapter);
 	cxl_debugfs_adapter_remove(adapter);
-	cxl_release_psl_err_irq(adapter);
-	cxl_unmap_adapter_regs(adapter);
-	cxl_remove_adapter_nr(adapter);
+
+	cxl_deconfigure_adapter(adapter);
 
 	device_unregister(&adapter->dev);
-
-	pci_disable_device(pdev);
 }
 
 static int cxl_probe(struct pci_dev *dev, const struct pci_device_id *id)
@@ -1160,15 +1199,9 @@ static int cxl_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	if (cxl_verbose)
 		dump_cxl_config_space(dev);
 
-	if ((rc = pci_enable_device(dev))) {
-		dev_err(&dev->dev, "pci_enable_device failed: %i\n", rc);
-		return rc;
-	}
-
 	adapter = cxl_init_adapter(dev);
 	if (IS_ERR(adapter)) {
 		dev_err(&dev->dev, "cxl_init_adapter failed: %li\n", PTR_ERR(adapter));
-		pci_disable_device(dev);
 		return PTR_ERR(adapter);
 	}
 

From d76427b0d89524fdb623774a22a005ba5c400134 Mon Sep 17 00:00:00 2001
From: Daniel Axtens <dja@axtens.net>
Date: Fri, 14 Aug 2015 17:41:23 +1000
Subject: [PATCH 089/140] cxl: Refactor AFU init/teardown

As with an adapter, some aspects of initialisation are done only once
in the lifetime of an AFU: for example, allocating memory, or setting
up sysfs/debugfs files.

However, we may want to be able to do some parts of the initialisation
multiple times: for example, in error recovery we want to be able to
tear down and then re-map IO memory and IRQs.

Therefore, refactor AFU init/teardown as follows.

 - Create two new functions: 'cxl_configure_afu', and its pair
   'cxl_deconfigure_afu'. As with the adapter functions,
   these (de)configure resources that do not need to last the entire
   lifetime of the AFU.

 - Allocating and releasing memory remain the task of 'cxl_alloc_afu'
   and 'cxl_release_afu'.

 - Once-only functions that do not involve allocating/releasing memory
   stay in the overarching 'cxl_init_afu'/'cxl_remove_afu' pair.
   However, the task of picking an AFU mode and activating it has been
   broken out.

Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/pci.c | 95 +++++++++++++++++++++++++-----------------
 1 file changed, 57 insertions(+), 38 deletions(-)

diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index feec4800e922..b63d96023c50 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -753,45 +753,70 @@ ssize_t cxl_afu_read_err_buffer(struct cxl_afu *afu, char *buf,
 	return count;
 }
 
-static int cxl_init_afu(struct cxl *adapter, int slice, struct pci_dev *dev)
+static int cxl_configure_afu(struct cxl_afu *afu, struct cxl *adapter, struct pci_dev *dev)
 {
-	struct cxl_afu *afu;
-	bool free = true;
 	int rc;
 
-	if (!(afu = cxl_alloc_afu(adapter, slice)))
-		return -ENOMEM;
-
-	if ((rc = dev_set_name(&afu->dev, "afu%i.%i", adapter->adapter_num, slice)))
-		goto err1;
-
 	if ((rc = cxl_map_slice_regs(afu, adapter, dev)))
-		goto err1;
+		return rc;
 
 	if ((rc = sanitise_afu_regs(afu)))
-		goto err2;
+		goto err1;
 
 	/* We need to reset the AFU before we can read the AFU descriptor */
 	if ((rc = __cxl_afu_reset(afu)))
-		goto err2;
+		goto err1;
 
 	if (cxl_verbose)
 		dump_afu_descriptor(afu);
 
 	if ((rc = cxl_read_afu_descriptor(afu)))
-		goto err2;
+		goto err1;
 
 	if ((rc = cxl_afu_descriptor_looks_ok(afu)))
-		goto err2;
+		goto err1;
 
 	if ((rc = init_implementation_afu_regs(afu)))
-		goto err2;
+		goto err1;
 
 	if ((rc = cxl_register_serr_irq(afu)))
-		goto err2;
+		goto err1;
 
 	if ((rc = cxl_register_psl_irq(afu)))
-		goto err3;
+		goto err2;
+
+	return 0;
+
+err2:
+	cxl_release_serr_irq(afu);
+err1:
+	cxl_unmap_slice_regs(afu);
+	return rc;
+}
+
+static void cxl_deconfigure_afu(struct cxl_afu *afu)
+{
+	cxl_release_psl_irq(afu);
+	cxl_release_serr_irq(afu);
+	cxl_unmap_slice_regs(afu);
+}
+
+static int cxl_init_afu(struct cxl *adapter, int slice, struct pci_dev *dev)
+{
+	struct cxl_afu *afu;
+	int rc;
+
+	afu = cxl_alloc_afu(adapter, slice);
+	if (!afu)
+		return -ENOMEM;
+
+	rc = dev_set_name(&afu->dev, "afu%i.%i", adapter->adapter_num, slice);
+	if (rc)
+		goto err_free;
+
+	rc = cxl_configure_afu(afu, adapter, dev);
+	if (rc)
+		goto err_free;
 
 	/* Don't care if this fails */
 	cxl_debugfs_afu_add(afu);
@@ -806,10 +831,6 @@ static int cxl_init_afu(struct cxl *adapter, int slice, struct pci_dev *dev)
 	if ((rc = cxl_sysfs_afu_add(afu)))
 		goto err_put1;
 
-
-	if ((rc = cxl_afu_select_best_mode(afu)))
-		goto err_put2;
-
 	adapter->afu[afu->slice] = afu;
 
 	if ((rc = cxl_pci_vphb_add(afu)))
@@ -817,21 +838,16 @@ static int cxl_init_afu(struct cxl *adapter, int slice, struct pci_dev *dev)
 
 	return 0;
 
-err_put2:
-	cxl_sysfs_afu_remove(afu);
 err_put1:
-	device_unregister(&afu->dev);
-	free = false;
+	cxl_deconfigure_afu(afu);
 	cxl_debugfs_afu_remove(afu);
-	cxl_release_psl_irq(afu);
-err3:
-	cxl_release_serr_irq(afu);
-err2:
-	cxl_unmap_slice_regs(afu);
-err1:
-	if (free)
-		kfree(afu);
+	device_unregister(&afu->dev);
 	return rc;
+
+err_free:
+	kfree(afu);
+	return rc;
+
 }
 
 static void cxl_remove_afu(struct cxl_afu *afu)
@@ -851,10 +867,7 @@ static void cxl_remove_afu(struct cxl_afu *afu)
 	cxl_context_detach_all(afu);
 	cxl_afu_deactivate_mode(afu);
 
-	cxl_release_psl_irq(afu);
-	cxl_release_serr_irq(afu);
-	cxl_unmap_slice_regs(afu);
-
+	cxl_deconfigure_afu(afu);
 	device_unregister(&afu->dev);
 }
 
@@ -1206,8 +1219,14 @@ static int cxl_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	}
 
 	for (slice = 0; slice < adapter->slices; slice++) {
-		if ((rc = cxl_init_afu(adapter, slice, dev)))
+		if ((rc = cxl_init_afu(adapter, slice, dev))) {
 			dev_err(&dev->dev, "AFU %i failed to initialise: %i\n", slice, rc);
+			continue;
+		}
+
+		rc = cxl_afu_select_best_mode(adapter->afu[slice]);
+		if (rc)
+			dev_err(&dev->dev, "AFU %i failed to start: %i\n", slice, rc);
 	}
 
 	return 0;

From 4e1efb403c1c016ae831bd9988a7d2e5e0af41a0 Mon Sep 17 00:00:00 2001
From: Daniel Axtens <dja@axtens.net>
Date: Fri, 14 Aug 2015 17:41:24 +1000
Subject: [PATCH 090/140] cxl: Don't remove AFUs/vPHBs in cxl_reset

If the driver doesn't participate in EEH, the AFUs will be removed
by cxl_remove, which will be invoked by EEH.

If the driver does particpate in EEH, the vPHB needs to stick around
so that the it can particpate.

In both cases, we shouldn't remove the AFU/vPHB.

Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/pci.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index b63d96023c50..2b61cb1ee62c 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -880,11 +880,6 @@ int cxl_reset(struct cxl *adapter)
 
 	dev_info(&dev->dev, "CXL reset\n");
 
-	for (i = 0; i < adapter->slices; i++) {
-		cxl_pci_vphb_remove(adapter->afu[i]);
-		cxl_remove_afu(adapter->afu[i]);
-	}
-
 	/* pcie_warm_reset requests a fundamental pci reset which includes a
 	 * PERST assert/deassert.  PERST triggers a loading of the image
 	 * if "user" or "factory" is selected in sysfs */

From 13e68d8bd05c998cae452a4f3400af1e8edd852e Mon Sep 17 00:00:00 2001
From: Daniel Axtens <dja@axtens.net>
Date: Fri, 14 Aug 2015 17:41:25 +1000
Subject: [PATCH 091/140] cxl: Allow the kernel to trust that an image won't
 change on PERST.

Provide a kernel API and a sysfs entry which allow a user to specify
that when a card is PERSTed, it's image will stay the same, allowing
it to participate in EEH.

cxl_reset is used to reflash the card. In that case, we cannot safely
assert that the image will not change. Therefore, disallow cxl_reset
if the flag is set.

Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 Documentation/ABI/testing/sysfs-class-cxl | 10 +++++++++
 drivers/misc/cxl/api.c                    |  7 ++++++
 drivers/misc/cxl/cxl.h                    |  1 +
 drivers/misc/cxl/pci.c                    |  7 ++++++
 drivers/misc/cxl/sysfs.c                  | 26 +++++++++++++++++++++++
 include/misc/cxl.h                        | 10 +++++++++
 6 files changed, 61 insertions(+)

diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl
index acfe9df83139..b07e86d4597f 100644
--- a/Documentation/ABI/testing/sysfs-class-cxl
+++ b/Documentation/ABI/testing/sysfs-class-cxl
@@ -223,3 +223,13 @@ Description:    write only
                 Writing 1 will issue a PERST to card which may cause the card
                 to reload the FPGA depending on load_image_on_perst.
 Users:		https://github.com/ibm-capi/libcxl
+
+What:		/sys/class/cxl/<card>/perst_reloads_same_image
+Date:		July 2015
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	read/write
+		Trust that when an image is reloaded via PERST, it will not
+		have changed.
+		0 = don't trust, the image may be different (default)
+		1 = trust that the image will not change.
+Users:		https://github.com/ibm-capi/libcxl
diff --git a/drivers/misc/cxl/api.c b/drivers/misc/cxl/api.c
index 729e0851167d..6a768a9ad22f 100644
--- a/drivers/misc/cxl/api.c
+++ b/drivers/misc/cxl/api.c
@@ -327,3 +327,10 @@ int cxl_afu_reset(struct cxl_context *ctx)
 	return cxl_afu_check_and_enable(afu);
 }
 EXPORT_SYMBOL_GPL(cxl_afu_reset);
+
+void cxl_perst_reloads_same_image(struct cxl_afu *afu,
+				  bool perst_reloads_same_image)
+{
+	afu->adapter->perst_same_image = perst_reloads_same_image;
+}
+EXPORT_SYMBOL_GPL(cxl_perst_reloads_same_image);
diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h
index d540542f9931..cda02412b01e 100644
--- a/drivers/misc/cxl/cxl.h
+++ b/drivers/misc/cxl/cxl.h
@@ -493,6 +493,7 @@ struct cxl {
 	bool user_image_loaded;
 	bool perst_loads_image;
 	bool perst_select_user;
+	bool perst_same_image;
 };
 
 int cxl_alloc_one_irq(struct cxl *adapter);
diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index 2b61cb1ee62c..bfbd6478c0c5 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -878,6 +878,12 @@ int cxl_reset(struct cxl *adapter)
 	int i;
 	u32 val;
 
+	if (adapter->perst_same_image) {
+		dev_warn(&dev->dev,
+			 "cxl: refusing to reset/reflash when perst_reloads_same_image is set.\n");
+		return -EINVAL;
+	}
+
 	dev_info(&dev->dev, "CXL reset\n");
 
 	/* pcie_warm_reset requests a fundamental pci reset which includes a
@@ -1151,6 +1157,7 @@ static struct cxl *cxl_init_adapter(struct pci_dev *dev)
 	 * configure/reconfigure
 	 */
 	adapter->perst_loads_image = true;
+	adapter->perst_same_image = false;
 
 	rc = cxl_configure_adapter(adapter, dev);
 	if (rc) {
diff --git a/drivers/misc/cxl/sysfs.c b/drivers/misc/cxl/sysfs.c
index 31f38bc71a3d..6619cf1f6e1f 100644
--- a/drivers/misc/cxl/sysfs.c
+++ b/drivers/misc/cxl/sysfs.c
@@ -112,12 +112,38 @@ static ssize_t load_image_on_perst_store(struct device *device,
 	return count;
 }
 
+static ssize_t perst_reloads_same_image_show(struct device *device,
+				 struct device_attribute *attr,
+				 char *buf)
+{
+	struct cxl *adapter = to_cxl_adapter(device);
+
+	return scnprintf(buf, PAGE_SIZE, "%i\n", adapter->perst_same_image);
+}
+
+static ssize_t perst_reloads_same_image_store(struct device *device,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct cxl *adapter = to_cxl_adapter(device);
+	int rc;
+	int val;
+
+	rc = sscanf(buf, "%i", &val);
+	if ((rc != 1) || !(val == 1 || val == 0))
+		return -EINVAL;
+
+	adapter->perst_same_image = (val == 1 ? true : false);
+	return count;
+}
+
 static struct device_attribute adapter_attrs[] = {
 	__ATTR_RO(caia_version),
 	__ATTR_RO(psl_revision),
 	__ATTR_RO(base_image),
 	__ATTR_RO(image_loaded),
 	__ATTR_RW(load_image_on_perst),
+	__ATTR_RW(perst_reloads_same_image),
 	__ATTR(reset, S_IWUSR, NULL, reset_adapter_store),
 };
 
diff --git a/include/misc/cxl.h b/include/misc/cxl.h
index 7a6c1d6cc173..f2ffe5bd720d 100644
--- a/include/misc/cxl.h
+++ b/include/misc/cxl.h
@@ -200,4 +200,14 @@ unsigned int cxl_fd_poll(struct file *file, struct poll_table_struct *poll);
 ssize_t cxl_fd_read(struct file *file, char __user *buf, size_t count,
 			   loff_t *off);
 
+/*
+ * For EEH, a driver may want to assert a PERST will reload the same image
+ * from flash into the FPGA.
+ *
+ * This is a property of the entire adapter, not a single AFU, so drivers
+ * should set this property with care!
+ */
+void cxl_perst_reloads_same_image(struct cxl_afu *afu,
+				  bool perst_reloads_same_image);
+
 #endif /* _MISC_CXL_H */

From 9e8df8a219635c5af36a49d78c1f69009b780339 Mon Sep 17 00:00:00 2001
From: Daniel Axtens <dja@axtens.net>
Date: Fri, 14 Aug 2015 17:41:26 +1000
Subject: [PATCH 092/140] cxl: EEH support

EEH (Enhanced Error Handling) allows a driver to recover from the
temporary failure of an attached PCI card. Enable basic CXL support
for EEH.

Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/cxl.h  |   1 +
 drivers/misc/cxl/pci.c  | 253 ++++++++++++++++++++++++++++++++++++++++
 drivers/misc/cxl/vphb.c |   8 ++
 3 files changed, 262 insertions(+)

diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h
index cda02412b01e..6f5386653dae 100644
--- a/drivers/misc/cxl/cxl.h
+++ b/drivers/misc/cxl/cxl.h
@@ -726,6 +726,7 @@ int cxl_psl_purge(struct cxl_afu *afu);
 
 void cxl_stop_trace(struct cxl *cxl);
 int cxl_pci_vphb_add(struct cxl_afu *afu);
+void cxl_pci_vphb_reconfigure(struct cxl_afu *afu);
 void cxl_pci_vphb_remove(struct cxl_afu *afu);
 
 extern struct pci_driver cxl_pci_driver;
diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index bfbd6478c0c5..03ddb2d8f974 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -24,6 +24,7 @@
 #include <asm/io.h>
 
 #include "cxl.h"
+#include <misc/cxl.h>
 
 
 #define CXL_PCI_VSEC_ID	0x1280
@@ -1252,10 +1253,262 @@ static void cxl_remove(struct pci_dev *dev)
 	cxl_remove_adapter(adapter);
 }
 
+static pci_ers_result_t cxl_vphb_error_detected(struct cxl_afu *afu,
+						pci_channel_state_t state)
+{
+	struct pci_dev *afu_dev;
+	pci_ers_result_t result = PCI_ERS_RESULT_NEED_RESET;
+	pci_ers_result_t afu_result = PCI_ERS_RESULT_NEED_RESET;
+
+	/* There should only be one entry, but go through the list
+	 * anyway
+	 */
+	list_for_each_entry(afu_dev, &afu->phb->bus->devices, bus_list) {
+		if (!afu_dev->driver)
+			continue;
+
+		afu_dev->error_state = state;
+
+		if (afu_dev->driver->err_handler)
+			afu_result = afu_dev->driver->err_handler->error_detected(afu_dev,
+										  state);
+		/* Disconnect trumps all, NONE trumps NEED_RESET */
+		if (afu_result == PCI_ERS_RESULT_DISCONNECT)
+			result = PCI_ERS_RESULT_DISCONNECT;
+		else if ((afu_result == PCI_ERS_RESULT_NONE) &&
+			 (result == PCI_ERS_RESULT_NEED_RESET))
+			result = PCI_ERS_RESULT_NONE;
+	}
+	return result;
+}
+
+static pci_ers_result_t cxl_pci_error_detected(struct pci_dev *pdev,
+					       pci_channel_state_t state)
+{
+	struct cxl *adapter = pci_get_drvdata(pdev);
+	struct cxl_afu *afu;
+	pci_ers_result_t result = PCI_ERS_RESULT_NEED_RESET;
+	int i;
+
+	/* At this point, we could still have an interrupt pending.
+	 * Let's try to get them out of the way before they do
+	 * anything we don't like.
+	 */
+	schedule();
+
+	/* If we're permanently dead, give up. */
+	if (state == pci_channel_io_perm_failure) {
+		/* Tell the AFU drivers; but we don't care what they
+		 * say, we're going away.
+		 */
+		for (i = 0; i < adapter->slices; i++) {
+			afu = adapter->afu[i];
+			cxl_vphb_error_detected(afu, state);
+		}
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+
+	/* Are we reflashing?
+	 *
+	 * If we reflash, we could come back as something entirely
+	 * different, including a non-CAPI card. As such, by default
+	 * we don't participate in the process. We'll be unbound and
+	 * the slot re-probed. (TODO: check EEH doesn't blindly rebind
+	 * us!)
+	 *
+	 * However, this isn't the entire story: for reliablity
+	 * reasons, we usually want to reflash the FPGA on PERST in
+	 * order to get back to a more reliable known-good state.
+	 *
+	 * This causes us a bit of a problem: if we reflash we can't
+	 * trust that we'll come back the same - we could have a new
+	 * image and been PERSTed in order to load that
+	 * image. However, most of the time we actually *will* come
+	 * back the same - for example a regular EEH event.
+	 *
+	 * Therefore, we allow the user to assert that the image is
+	 * indeed the same and that we should continue on into EEH
+	 * anyway.
+	 */
+	if (adapter->perst_loads_image && !adapter->perst_same_image) {
+		/* TODO take the PHB out of CXL mode */
+		dev_info(&pdev->dev, "reflashing, so opting out of EEH!\n");
+		return PCI_ERS_RESULT_NONE;
+	}
+
+	/*
+	 * At this point, we want to try to recover.  We'll always
+	 * need a complete slot reset: we don't trust any other reset.
+	 *
+	 * Now, we go through each AFU:
+	 *  - We send the driver, if bound, an error_detected callback.
+	 *    We expect it to clean up, but it can also tell us to give
+	 *    up and permanently detach the card. To simplify things, if
+	 *    any bound AFU driver doesn't support EEH, we give up on EEH.
+	 *
+	 *  - We detach all contexts associated with the AFU. This
+	 *    does not free them, but puts them into a CLOSED state
+	 *    which causes any the associated files to return useful
+	 *    errors to userland. It also unmaps, but does not free,
+	 *    any IRQs.
+	 *
+	 *  - We clean up our side: releasing and unmapping resources we hold
+	 *    so we can wire them up again when the hardware comes back up.
+	 *
+	 * Driver authors should note:
+	 *
+	 *  - Any contexts you create in your kernel driver (except
+	 *    those associated with anonymous file descriptors) are
+	 *    your responsibility to free and recreate. Likewise with
+	 *    any attached resources.
+	 *
+	 *  - We will take responsibility for re-initialising the
+	 *    device context (the one set up for you in
+	 *    cxl_pci_enable_device_hook and accessed through
+	 *    cxl_get_context). If you've attached IRQs or other
+	 *    resources to it, they remains yours to free.
+	 *
+	 * You can call the same functions to release resources as you
+	 * normally would: we make sure that these functions continue
+	 * to work when the hardware is down.
+	 *
+	 * Two examples:
+	 *
+	 * 1) If you normally free all your resources at the end of
+	 *    each request, or if you use anonymous FDs, your
+	 *    error_detected callback can simply set a flag to tell
+	 *    your driver not to start any new calls. You can then
+	 *    clear the flag in the resume callback.
+	 *
+	 * 2) If you normally allocate your resources on startup:
+	 *     * Set a flag in error_detected as above.
+	 *     * Let CXL detach your contexts.
+	 *     * In slot_reset, free the old resources and allocate new ones.
+	 *     * In resume, clear the flag to allow things to start.
+	 */
+	for (i = 0; i < adapter->slices; i++) {
+		afu = adapter->afu[i];
+
+		result = cxl_vphb_error_detected(afu, state);
+
+		/* Only continue if everyone agrees on NEED_RESET */
+		if (result != PCI_ERS_RESULT_NEED_RESET)
+			return result;
+
+		cxl_context_detach_all(afu);
+		cxl_afu_deactivate_mode(afu);
+		cxl_deconfigure_afu(afu);
+	}
+	cxl_deconfigure_adapter(adapter);
+
+	return result;
+}
+
+static pci_ers_result_t cxl_pci_slot_reset(struct pci_dev *pdev)
+{
+	struct cxl *adapter = pci_get_drvdata(pdev);
+	struct cxl_afu *afu;
+	struct cxl_context *ctx;
+	struct pci_dev *afu_dev;
+	pci_ers_result_t afu_result = PCI_ERS_RESULT_RECOVERED;
+	pci_ers_result_t result = PCI_ERS_RESULT_RECOVERED;
+	int i;
+
+	if (cxl_configure_adapter(adapter, pdev))
+		goto err;
+
+	for (i = 0; i < adapter->slices; i++) {
+		afu = adapter->afu[i];
+
+		if (cxl_configure_afu(afu, adapter, pdev))
+			goto err;
+
+		if (cxl_afu_select_best_mode(afu))
+			goto err;
+
+		cxl_pci_vphb_reconfigure(afu);
+
+		list_for_each_entry(afu_dev, &afu->phb->bus->devices, bus_list) {
+			/* Reset the device context.
+			 * TODO: make this less disruptive
+			 */
+			ctx = cxl_get_context(afu_dev);
+
+			if (ctx && cxl_release_context(ctx))
+				goto err;
+
+			ctx = cxl_dev_context_init(afu_dev);
+			if (!ctx)
+				goto err;
+
+			afu_dev->dev.archdata.cxl_ctx = ctx;
+
+			if (cxl_afu_check_and_enable(afu))
+				goto err;
+
+			afu_dev->error_state = pci_channel_io_normal;
+
+			/* If there's a driver attached, allow it to
+			 * chime in on recovery. Drivers should check
+			 * if everything has come back OK, but
+			 * shouldn't start new work until we call
+			 * their resume function.
+			 */
+			if (!afu_dev->driver)
+				continue;
+
+			if (afu_dev->driver->err_handler &&
+			    afu_dev->driver->err_handler->slot_reset)
+				afu_result = afu_dev->driver->err_handler->slot_reset(afu_dev);
+
+			if (afu_result == PCI_ERS_RESULT_DISCONNECT)
+				result = PCI_ERS_RESULT_DISCONNECT;
+		}
+	}
+	return result;
+
+err:
+	/* All the bits that happen in both error_detected and cxl_remove
+	 * should be idempotent, so we don't need to worry about leaving a mix
+	 * of unconfigured and reconfigured resources.
+	 */
+	dev_err(&pdev->dev, "EEH recovery failed. Asking to be disconnected.\n");
+	return PCI_ERS_RESULT_DISCONNECT;
+}
+
+static void cxl_pci_resume(struct pci_dev *pdev)
+{
+	struct cxl *adapter = pci_get_drvdata(pdev);
+	struct cxl_afu *afu;
+	struct pci_dev *afu_dev;
+	int i;
+
+	/* Everything is back now. Drivers should restart work now.
+	 * This is not the place to be checking if everything came back up
+	 * properly, because there's no return value: do that in slot_reset.
+	 */
+	for (i = 0; i < adapter->slices; i++) {
+		afu = adapter->afu[i];
+
+		list_for_each_entry(afu_dev, &afu->phb->bus->devices, bus_list) {
+			if (afu_dev->driver && afu_dev->driver->err_handler &&
+			    afu_dev->driver->err_handler->resume)
+				afu_dev->driver->err_handler->resume(afu_dev);
+		}
+	}
+}
+
+static const struct pci_error_handlers cxl_err_handler = {
+	.error_detected = cxl_pci_error_detected,
+	.slot_reset = cxl_pci_slot_reset,
+	.resume = cxl_pci_resume,
+};
+
 struct pci_driver cxl_pci_driver = {
 	.name = "cxl-pci",
 	.id_table = cxl_pci_tbl,
 	.probe = cxl_probe,
 	.remove = cxl_remove,
 	.shutdown = cxl_remove,
+	.err_handler = &cxl_err_handler,
 };
diff --git a/drivers/misc/cxl/vphb.c b/drivers/misc/cxl/vphb.c
index 2930911c1e42..6dd16a6d153f 100644
--- a/drivers/misc/cxl/vphb.c
+++ b/drivers/misc/cxl/vphb.c
@@ -266,6 +266,14 @@ int cxl_pci_vphb_add(struct cxl_afu *afu)
 	return 0;
 }
 
+void cxl_pci_vphb_reconfigure(struct cxl_afu *afu)
+{
+	/* When we are reconfigured, the AFU's MMIO space is unmapped
+	 * and remapped. We need to reflect this in the PHB's view of
+	 * the world.
+	 */
+	afu->phb->cfg_addr = afu->afu_desc_mmio + afu->crs_offset;
+}
 
 void cxl_pci_vphb_remove(struct cxl_afu *afu)
 {

From 25901632c9323e5208cca66097a0b8f34c752606 Mon Sep 17 00:00:00 2001
From: Daniel Axtens <dja@axtens.net>
Date: Fri, 14 Aug 2015 17:41:27 +1000
Subject: [PATCH 093/140] cxl: Add CONFIG_CXL_EEH symbol

CONFIG_CXL_EEH is for CXL's EEH related code.

Other drivers can depend on or #ifdef on this symbol to configure
PERST behaviour, allowing CXL to participate in the EEH process.

Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/Kconfig | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/misc/cxl/Kconfig b/drivers/misc/cxl/Kconfig
index b6db9ebd52c2..8756d06e2bb8 100644
--- a/drivers/misc/cxl/Kconfig
+++ b/drivers/misc/cxl/Kconfig
@@ -11,11 +11,16 @@ config CXL_KERNEL_API
 	bool
 	default n
 
+config CXL_EEH
+	bool
+	default n
+
 config CXL
 	tristate "Support for IBM Coherent Accelerators (CXL)"
-	depends on PPC_POWERNV && PCI_MSI
+	depends on PPC_POWERNV && PCI_MSI && EEH
 	select CXL_BASE
 	select CXL_KERNEL_API
+	select CXL_EEH
 	default m
 	help
 	  Select this option to enable driver support for IBM Coherent

From 8c7dd08a8ccac3f0f3df6002dc8e86d3ca6c56a8 Mon Sep 17 00:00:00 2001
From: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Date: Fri, 14 Aug 2015 12:28:38 +0530
Subject: [PATCH 094/140] cxl: Plug irq_bitmap getting leaked in cxl_context

This patch plugs the leak of irq_bitmap, allocated as part of
initialization of cxl_context struct; during the call to
afu_allocate_irqs. The bitmap is now release during the call to function
afu_release_irqs.

Reported-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/irq.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/misc/cxl/irq.c b/drivers/misc/cxl/irq.c
index 62823784f68e..72bf45ae3806 100644
--- a/drivers/misc/cxl/irq.c
+++ b/drivers/misc/cxl/irq.c
@@ -520,4 +520,8 @@ void afu_release_irqs(struct cxl_context *ctx, void *cookie)
 
 	afu_irq_name_free(ctx);
 	cxl_release_irq_ranges(&ctx->irqs, ctx->afu->adapter);
+
+	kfree(ctx->irq_bitmap);
+	ctx->irq_bitmap = NULL;
+	ctx->irq_count = 0;
 }

From 281786ea2cd03635648d1e2b131c6fbc0ed47b68 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <mpe@ellerman.id.au>
Date: Mon, 17 Aug 2015 16:35:48 +1000
Subject: [PATCH 095/140] selftests/powerpc: Install tempfile so the
 subpage_prot_file test works

We forgot to install the tempfile, so when the selftests are installed
and then run the subpage_prot_file test fails.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 tools/testing/selftests/powerpc/mm/Makefile | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/powerpc/mm/Makefile b/tools/testing/selftests/powerpc/mm/Makefile
index 41cc3ed66818..ee179e22308c 100644
--- a/tools/testing/selftests/powerpc/mm/Makefile
+++ b/tools/testing/selftests/powerpc/mm/Makefile
@@ -2,8 +2,9 @@ noarg:
 	$(MAKE) -C ../
 
 TEST_PROGS := hugetlb_vs_thp_test subpage_prot
+TEST_FILES := tempfile
 
-all: $(TEST_PROGS) tempfile
+all: $(TEST_PROGS) $(TEST_FILES)
 
 $(TEST_PROGS): ../harness.c
 

From e8c4b3dfe17a7e83ea134d6a857f9a3e8e71357f Mon Sep 17 00:00:00 2001
From: Jason Jin <Jason.Jin@freescale.com>
Date: Mon, 17 Aug 2015 15:50:57 +0800
Subject: [PATCH 096/140] powerpc: Add a vga alias node for P1022

In u-boot, when set the video as console, the name 'vga' is used
as a general name for the video device, during the fdt_fixup_stdout
process, the 'vga' name is used to search in the dtb to setup the
'linux,stdout-path' node. Though the P1022 DIU is not VGA-compatible
device, to meet the 'vga' name used in u-boot, the vga alias node is
added for P1022 in this patch. At the same time, a display alias is
also added so that no other components grow dependencies on the vga
alias node.

Signed-off-by: Jason Jin <Jason.Jin@freescale.com>
Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/dts/fsl/p1022si-post.dtsi | 2 +-
 arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi  | 2 ++
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
index ebf202234549..426bf4103b9e 100644
--- a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
@@ -175,7 +175,7 @@
 
 /include/ "pq3-gpio-0.dtsi"
 
-	display@10000 {
+	display: display@10000 {
 		compatible = "fsl,diu", "fsl,p1022-diu";
 		reg = <0x10000 1000>;
 		interrupts = <64 2 0 0>;
diff --git a/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
index 1956dea040cc..de76ae8992c6 100644
--- a/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
@@ -50,6 +50,8 @@
 		pci0 = &pci0;
 		pci1 = &pci1;
 		pci2 = &pci2;
+		vga = &display;
+		display = &display;
 	};
 
 	cpus {

From e5e55cc08c76134e38526a66b3bd30b1b71bbf63 Mon Sep 17 00:00:00 2001
From: Kevin Hao <haokexin@gmail.com>
Date: Thu, 13 Aug 2015 19:51:35 +0800
Subject: [PATCH 097/140] powerpc/e6500: remove the stale TCD_LOCK macro

Since we moved the "lock" to be the first element of
struct tlb_core_data in commit 82d86de25b9c ("powerpc/e6500: Make TLB
lock recursive"), this macro is not used by any code. Just delete it.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/kernel/asm-offsets.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 98230579d99c..810f433731dc 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -213,7 +213,6 @@ int main(void)
 		offsetof(struct tlb_core_data, esel_max));
 	DEFINE(TCD_ESEL_FIRST,
 		offsetof(struct tlb_core_data, esel_first));
-	DEFINE(TCD_LOCK, offsetof(struct tlb_core_data, lock));
 #endif /* CONFIG_PPC_BOOK3E */
 
 #ifdef CONFIG_PPC_STD_MMU_64

From 69399ee9cbcb00bbdd9ff6fafafde23ef404d40f Mon Sep 17 00:00:00 2001
From: Kevin Hao <haokexin@gmail.com>
Date: Thu, 13 Aug 2015 19:51:36 +0800
Subject: [PATCH 098/140] powerpc/e6500: hw tablewalk: optimize a bit for tcd
 lock acquiring codes

It makes no sense to put the instructions for calculating the lock
value (cpu number + 1) and the clearing of eq bit of cr1 in lbarx/stbcx
loop. And when the lock is acquired by the other thread, the current
lock value has no chance to equal with the lock value used by current
cpu. So we can skip the comparing for these two lock values in the
lbz/bne loop.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/mm/tlb_low_64e.S | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index 765b419883f2..e4185581c5a7 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -308,11 +308,11 @@ BEGIN_FTR_SECTION		/* CPU_FTR_SMT */
 	 *
 	 * MAS6:IND should be already set based on MAS4
 	 */
-1:	lbarx	r15,0,r11
 	lhz	r10,PACAPACAINDEX(r13)
-	cmpdi	r15,0
-	cmpdi	cr1,r15,1	/* set cr1.eq = 0 for non-recursive */
 	addi	r10,r10,1
+	crclr	cr1*4+eq	/* set cr1.eq = 0 for non-recursive */
+1:	lbarx	r15,0,r11
+	cmpdi	r15,0
 	bne	2f
 	stbcx.	r10,0,r11
 	bne	1b
@@ -320,9 +320,9 @@ BEGIN_FTR_SECTION		/* CPU_FTR_SMT */
 	.subsection 1
 2:	cmpd	cr1,r15,r10	/* recursive lock due to mcheck/crit/etc? */
 	beq	cr1,3b		/* unlock will happen if cr1.eq = 0 */
-	lbz	r15,0(r11)
+10:	lbz	r15,0(r11)
 	cmpdi	r15,0
-	bne	2b
+	bne	10b
 	b	1b
 	.previous
 

From 32d3c4ff01e0c765594b7dd8f5c539e9dca92223 Mon Sep 17 00:00:00 2001
From: Hou Zhiqiang <B48286@freescale.com>
Date: Mon, 10 Aug 2015 17:39:45 +0800
Subject: [PATCH 099/140] powerpc/85xx: Remove unused pci fixup hooks on
 c293pcie

The c293pcie board is an endpoint device and it doesn't need PM,
so remove hooks pcibios_fixup_phb and pcibios_fixup_bus.

Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/platforms/85xx/c293pcie.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/powerpc/platforms/85xx/c293pcie.c b/arch/powerpc/platforms/85xx/c293pcie.c
index 84476b646005..61bc851e9a8e 100644
--- a/arch/powerpc/platforms/85xx/c293pcie.c
+++ b/arch/powerpc/platforms/85xx/c293pcie.c
@@ -66,10 +66,6 @@ define_machine(c293_pcie) {
 	.probe			= c293_pcie_probe,
 	.setup_arch		= c293_pcie_setup_arch,
 	.init_IRQ		= c293_pcie_pic_init,
-#ifdef CONFIG_PCI
-	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
-	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
-#endif
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
 	.calibrate_decr		= generic_calibrate_decr,

From 0d748ec5eaedfa0802e02df6b5912d32c752f88e Mon Sep 17 00:00:00 2001
From: Priyanka Jain <Priyanka.Jain@freescale.com>
Date: Thu, 30 Jul 2015 10:33:55 +0530
Subject: [PATCH 100/140] powerpc/fsl-booke: Add T1040D4RDB/T1042D4RDB board
 support
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

T1040D4RDB/T1042D4RDB are Freescale Reference Design Board
which can support T1040/T1042 QorIQ Power
Architecture™ processor respectively

T1040D4RDB/T1042D4RDB board Overview
-------------------------------------
- SERDES Connections, 8 lanes supporting:
        - PCI
        - SGMII
        - SATA 2.0
        - QSGMII(only for T1040D4RDB)
    - DDR Controller
        - Supports rates of up to 1600 MHz data-rate
        - Supports one DDR4 UDIMM
    -IFC/Local Bus
        - NAND flash: 1GB 8-bit NAND flash
        - NOR: 128MB 16-bit NOR Flash
    - Ethernet
        - Two on-board RGMII 10/100/1G ethernet ports.
        - PHY #0 remains powered up during deep-sleep
    - CPLD
    - Clocks
        - System and DDR clock (SYSCLK, “DDRCLK”)
        - SERDES clocks
    - Power Supplies
    - USB
        - Supports two USB 2.0 ports with integrated PHYs
        - Two type A ports with 5V@1.5A per port.
    - SDHC
        - SDHC/SDXC connector
    - SPI
        - On-board 64MB SPI flash
    - I2C
        - Devices connected: EEPROM, thermal monitor, VID controller
    - Other IO
        - Two Serial ports
        - ProfiBus port

    Add support for T1040/T1042D4RDB board:
    -add device tree
    -Add entry in corenet_generic.c

Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/dts/t1040d4rdb.dts          |  46 ++++
 arch/powerpc/boot/dts/t1042d4rdb.dts          |  53 +++++
 arch/powerpc/boot/dts/t104xd4rdb.dtsi         | 205 ++++++++++++++++++
 arch/powerpc/platforms/85xx/corenet_generic.c |   2 +
 4 files changed, 306 insertions(+)
 create mode 100644 arch/powerpc/boot/dts/t1040d4rdb.dts
 create mode 100644 arch/powerpc/boot/dts/t1042d4rdb.dts
 create mode 100644 arch/powerpc/boot/dts/t104xd4rdb.dtsi

diff --git a/arch/powerpc/boot/dts/t1040d4rdb.dts b/arch/powerpc/boot/dts/t1040d4rdb.dts
new file mode 100644
index 000000000000..2d1315a1670e
--- /dev/null
+++ b/arch/powerpc/boot/dts/t1040d4rdb.dts
@@ -0,0 +1,46 @@
+/*
+ * T1040D4RDB Device Tree Source
+ *
+ * Copyright 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xd4rdb.dtsi"
+
+/ {
+	model = "fsl,T1040D4RDB";
+	compatible = "fsl,T1040D4RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+};
+
+/include/ "fsl/t1040si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t1042d4rdb.dts b/arch/powerpc/boot/dts/t1042d4rdb.dts
new file mode 100644
index 000000000000..846f8c87e85a
--- /dev/null
+++ b/arch/powerpc/boot/dts/t1042d4rdb.dts
@@ -0,0 +1,53 @@
+/*
+ * T1042D4RDB Device Tree Source
+ *
+ * Copyright 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xd4rdb.dtsi"
+
+/ {
+	model = "fsl,T1042D4RDB";
+	compatible = "fsl,T1042D4RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	ifc: localbus@ffe124000 {
+		cpld@3,0 {
+			compatible = "fsl,t1040d4rdb-cpld",
+					"fsl,deepsleep-cpld";
+		};
+	};
+};
+
+/include/ "fsl/t1040si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t104xd4rdb.dtsi b/arch/powerpc/boot/dts/t104xd4rdb.dtsi
new file mode 100644
index 000000000000..491367bd3883
--- /dev/null
+++ b/arch/powerpc/boot/dts/t104xd4rdb.dtsi
@@ -0,0 +1,205 @@
+/*
+ * T1040D4RDB/T1042D4RDB Device Tree Source
+ *
+ * Copyright 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+
+		cpld@3,0 {
+			compatible = "fsl,t1040d4rdb-cpld";
+			reg = <3 0 0x300>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,n25q512ax3";
+				reg = <0>;
+				/* input clock */
+				spi-max-frequency = <10000000>;
+			};
+		};
+		i2c@118000 {
+			hwmon@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+				interrupts = <0x2 0x1 0 0>;
+			};
+		};
+
+		i2c@118100 {
+			mux@77 {
+				/*
+				 * Child nodes of mux depend on which i2c
+				 * devices are connected via the mini PCI
+				 * connector slot1, the mini PCI connector
+				 * slot2, the HDMI connector, and the PEX
+				 * slot. Systems with such devices attached
+				 * should provide a wrapper .dts file that
+				 * includes this one, and adds those nodes
+				 */
+				compatible = "nxp,pca9546";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x0 0x0 0x10000000
+			  0x01000000 0 0x0 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
+			  0x01000000 0 0 0xf 0xf8010000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe270000 {
+		reg = <0xf 0xfe270000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
index bd839dc287fe..b39557120cbb 100644
--- a/arch/powerpc/platforms/85xx/corenet_generic.c
+++ b/arch/powerpc/platforms/85xx/corenet_generic.c
@@ -153,6 +153,8 @@ static const char * const boards[] __initconst = {
 	"fsl,T1023RDB",
 	"fsl,T1024QDS",
 	"fsl,T1024RDB",
+	"fsl,T1040D4RDB",
+	"fsl,T1042D4RDB",
 	"fsl,T1040QDS",
 	"fsl,T1042QDS",
 	"fsl,T1040RDB",

From c8254e27fd34cdd21febd5b1caca409117914332 Mon Sep 17 00:00:00 2001
From: Wang Dongsheng <dongsheng.wang@freescale.com>
Date: Fri, 14 Aug 2015 11:12:09 +0800
Subject: [PATCH 101/140] powerpc/85xx: Add binding for SCFG

SCFG provides SoC specific configuration and status registers for
the chip. Add this for powerpc platform.

Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 .../devicetree/bindings/powerpc/fsl/scfg.txt   | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/scfg.txt

diff --git a/Documentation/devicetree/bindings/powerpc/fsl/scfg.txt b/Documentation/devicetree/bindings/powerpc/fsl/scfg.txt
new file mode 100644
index 000000000000..0532c46b3372
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/scfg.txt
@@ -0,0 +1,18 @@
+Freescale Supplement configuration unit (SCFG)
+
+SCFG is the supplemental configuration unit, that provides SoC specific
+configuration and status registers for the chip. Such as getting PEX port
+status.
+
+Required properties:
+
+- compatible: should be "fsl,<chip>-scfg"
+- reg: should contain base address and length of SCFG memory-mapped
+registers
+
+Example:
+
+	scfg: global-utilities@fc000 {
+		compatible = "fsl,t1040-scfg";
+		reg = <0xfc000 0x1000>;
+	};

From 163e60c169752b2e817735d28d3bd2d73cd268f3 Mon Sep 17 00:00:00 2001
From: Wang Dongsheng <dongsheng.wang@freescale.com>
Date: Fri, 14 Aug 2015 11:12:10 +0800
Subject: [PATCH 102/140] powerpc/mpc85xx:Add SCFG device tree support of T104x

Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
index 9e9f7e201d43..9770d0278493 100644
--- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
@@ -484,6 +484,11 @@
 		reg	   = <0xea000 0x4000>;
 	};
 
+	scfg: global-utilities@fc000 {
+		compatible = "fsl,t1040-scfg";
+		reg = <0xfc000 0x1000>;
+	};
+
 /include/ "elo3-dma-0.dtsi"
 /include/ "elo3-dma-1.dtsi"
 /include/ "qoriq-espi-0.dtsi"

From 4524cd093fa8f03b198e095ebbb679c30839559c Mon Sep 17 00:00:00 2001
From: Jaiprakash Singh <b44839@freescale.com>
Date: Fri, 10 Jul 2015 17:11:01 +0800
Subject: [PATCH 103/140] powerpc/t1023rdb/dts: set ifc nand chip select from 2
 to 1

IFC NAND chip select is wrongly mapped to 2 in reg property of
NAND node. Due to this kernel is not able probe NAND flash. Set
chip select to 1 in reg property.

Signed-off-by: Jaiprakash Singh <b44839@freescale.com>
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/dts/t1023rdb.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/boot/dts/t1023rdb.dts b/arch/powerpc/boot/dts/t1023rdb.dts
index aa50885b9212..d3fa8294cd49 100644
--- a/arch/powerpc/boot/dts/t1023rdb.dts
+++ b/arch/powerpc/boot/dts/t1023rdb.dts
@@ -60,7 +60,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "fsl,ifc-nand";
-			reg = <0x2 0x0 0x10000>;
+			reg = <0x1 0x0 0x10000>;
 		};
 	};
 

From 74b5037baa2011a2799e2c43adde7d171b072f9e Mon Sep 17 00:00:00 2001
From: Michael Ellerman <mpe@ellerman.id.au>
Date: Fri, 7 Aug 2015 16:19:43 +1000
Subject: [PATCH 104/140] powerpc/mm: Fix pte_pagesize_index() crash on 4K
 w/64K hash

The powerpc kernel can be built to have either a 4K PAGE_SIZE or a 64K
PAGE_SIZE.

However when built with a 4K PAGE_SIZE there is an additional config
option which can be enabled, PPC_HAS_HASH_64K, which means the kernel
also knows how to hash a 64K page even though the base PAGE_SIZE is 4K.

This is used in one obscure configuration, to support 64K pages for SPU
local store on the Cell processor when the rest of the kernel is using
4K pages.

In this configuration, pte_pagesize_index() is defined to just pass
through its arguments to get_slice_psize(). However pte_pagesize_index()
is called for both user and kernel addresses, whereas get_slice_psize()
only knows how to handle user addresses.

This has been broken forever, however until recently it happened to
work. That was because in get_slice_psize() the large kernel address
would cause the right shift of the slice mask to return zero.

However in commit 7aa0727f3302 ("powerpc/mm: Increase the slice range to
64TB"), the get_slice_psize() code was changed so that instead of a
right shift we do an array lookup based on the address. When passed a
kernel address this means we index way off the end of the slice array
and return random junk.

That is only fatal if we happen to hit something non-zero, but when we
do return a non-zero value we confuse the MMU code and eventually cause
a check stop.

This fix is ugly, but simple. When we're called for a kernel address we
return 4K, which is always correct in this configuration, otherwise we
use the slice mask.

Fixes: 7aa0727f3302 ("powerpc/mm: Increase the slice range to 64TB")
Reported-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/pgtable-ppc64.h | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index 3bb7488bd24b..7ee2300ee392 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -135,7 +135,19 @@
 #define pte_iterate_hashed_end() } while(0)
 
 #ifdef CONFIG_PPC_HAS_HASH_64K
-#define pte_pagesize_index(mm, addr, pte)	get_slice_psize(mm, addr)
+/*
+ * We expect this to be called only for user addresses or kernel virtual
+ * addresses other than the linear mapping.
+ */
+#define pte_pagesize_index(mm, addr, pte)			\
+	({							\
+		unsigned int psize;				\
+		if (is_kernel_addr(addr))			\
+			psize = MMU_PAGE_4K;			\
+		else						\
+			psize = get_slice_psize(mm, addr);	\
+		psize;						\
+	})
 #else
 #define pte_pagesize_index(mm, addr, pte)	MMU_PAGE_4K
 #endif

From f444f1f898d7c4bbe45d12ffe3f38349ff83ec4a Mon Sep 17 00:00:00 2001
From: Michael Ellerman <mpe@ellerman.id.au>
Date: Fri, 7 Aug 2015 16:19:44 +1000
Subject: [PATCH 105/140] powerpc/cell: Drop support for 64K local store on 4K
 kernels

Back in the olden days we added support for using 64K pages to map the
SPU (Synergistic Processing Unit) local store on Cell, when the main
kernel was using 4K pages.

This was useful at the time because distros were using 4K pages, but
using 64K pages on the SPUs could reduce TLB pressure there.

However these days the number of Cell users is approaching zero, and
supporting this option adds unpleasant complexity to the memory
management code.

So drop the option, CONFIG_SPU_FS_64K_LS, and all related code.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
---
 arch/powerpc/include/asm/spu_csa.h            |   6 -
 arch/powerpc/mm/hugetlbpage.c                 |   8 --
 arch/powerpc/platforms/cell/Kconfig           |  15 ---
 arch/powerpc/platforms/cell/spufs/file.c      |  55 --------
 .../platforms/cell/spufs/lscsa_alloc.c        | 124 +-----------------
 5 files changed, 2 insertions(+), 206 deletions(-)

diff --git a/arch/powerpc/include/asm/spu_csa.h b/arch/powerpc/include/asm/spu_csa.h
index a40fd491250c..51f80b41cda3 100644
--- a/arch/powerpc/include/asm/spu_csa.h
+++ b/arch/powerpc/include/asm/spu_csa.h
@@ -241,12 +241,6 @@ struct spu_priv2_collapsed {
  */
 struct spu_state {
 	struct spu_lscsa *lscsa;
-#ifdef CONFIG_SPU_FS_64K_LS
-	int		use_big_pages;
-	/* One struct page per 64k page */
-#define SPU_LSCSA_NUM_BIG_PAGES	(sizeof(struct spu_lscsa) / 0x10000)
-	struct page	*lscsa_pages[SPU_LSCSA_NUM_BIG_PAGES];
-#endif
 	struct spu_problem_collapsed prob;
 	struct spu_priv1_collapsed priv1;
 	struct spu_priv2_collapsed priv2;
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index bb0bd7025cb8..06c14523b787 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -808,14 +808,6 @@ static int __init add_huge_page_size(unsigned long long size)
 	if ((mmu_psize = shift_to_mmu_psize(shift)) < 0)
 		return -EINVAL;
 
-#ifdef CONFIG_SPU_FS_64K_LS
-	/* Disable support for 64K huge pages when 64K SPU local store
-	 * support is enabled as the current implementation conflicts.
-	 */
-	if (shift == PAGE_SHIFT_64K)
-		return -EINVAL;
-#endif /* CONFIG_SPU_FS_64K_LS */
-
 	BUG_ON(mmu_psize_defs[mmu_psize].shift != shift);
 
 	/* Return if huge page size has already been setup */
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 2f23133ab3d1..b0ac1773cea6 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -57,21 +57,6 @@ config SPU_FS
 	  Units on machines implementing the Broadband Processor
 	  Architecture.
 
-config SPU_FS_64K_LS
-	bool "Use 64K pages to map SPE local  store"
-	# we depend on PPC_MM_SLICES for now rather than selecting
-	# it because we depend on hugetlbfs hooks being present. We
-	# will fix that when the generic code has been improved to
-	# not require hijacking hugetlbfs hooks.
-	depends on SPU_FS && PPC_MM_SLICES && !PPC_64K_PAGES
-	default y
-	select PPC_HAS_HASH_64K
-	help
-	  This option causes SPE local stores to be mapped in process
-	  address spaces using 64K pages while the rest of the kernel
-	  uses 4K pages. This can improve performances of applications
-	  using multiple SPEs by lowering the TLB pressure on them.
-
 config SPU_BASE
 	bool
 	default n
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index d966bbe58b8f..5038fd578e65 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -239,23 +239,6 @@ spufs_mem_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 	unsigned long address = (unsigned long)vmf->virtual_address;
 	unsigned long pfn, offset;
 
-#ifdef CONFIG_SPU_FS_64K_LS
-	struct spu_state *csa = &ctx->csa;
-	int psize;
-
-	/* Check what page size we are using */
-	psize = get_slice_psize(vma->vm_mm, address);
-
-	/* Some sanity checking */
-	BUG_ON(csa->use_big_pages != (psize == MMU_PAGE_64K));
-
-	/* Wow, 64K, cool, we need to align the address though */
-	if (csa->use_big_pages) {
-		BUG_ON(vma->vm_start & 0xffff);
-		address &= ~0xfffful;
-	}
-#endif /* CONFIG_SPU_FS_64K_LS */
-
 	offset = vmf->pgoff << PAGE_SHIFT;
 	if (offset >= LS_SIZE)
 		return VM_FAULT_SIGBUS;
@@ -310,22 +293,6 @@ static const struct vm_operations_struct spufs_mem_mmap_vmops = {
 
 static int spufs_mem_mmap(struct file *file, struct vm_area_struct *vma)
 {
-#ifdef CONFIG_SPU_FS_64K_LS
-	struct spu_context	*ctx = file->private_data;
-	struct spu_state	*csa = &ctx->csa;
-
-	/* Sanity check VMA alignment */
-	if (csa->use_big_pages) {
-		pr_debug("spufs_mem_mmap 64K, start=0x%lx, end=0x%lx,"
-			 " pgoff=0x%lx\n", vma->vm_start, vma->vm_end,
-			 vma->vm_pgoff);
-		if (vma->vm_start & 0xffff)
-			return -EINVAL;
-		if (vma->vm_pgoff & 0xf)
-			return -EINVAL;
-	}
-#endif /* CONFIG_SPU_FS_64K_LS */
-
 	if (!(vma->vm_flags & VM_SHARED))
 		return -EINVAL;
 
@@ -336,25 +303,6 @@ static int spufs_mem_mmap(struct file *file, struct vm_area_struct *vma)
 	return 0;
 }
 
-#ifdef CONFIG_SPU_FS_64K_LS
-static unsigned long spufs_get_unmapped_area(struct file *file,
-		unsigned long addr, unsigned long len, unsigned long pgoff,
-		unsigned long flags)
-{
-	struct spu_context	*ctx = file->private_data;
-	struct spu_state	*csa = &ctx->csa;
-
-	/* If not using big pages, fallback to normal MM g_u_a */
-	if (!csa->use_big_pages)
-		return current->mm->get_unmapped_area(file, addr, len,
-						      pgoff, flags);
-
-	/* Else, try to obtain a 64K pages slice */
-	return slice_get_unmapped_area(addr, len, flags,
-				       MMU_PAGE_64K, 1);
-}
-#endif /* CONFIG_SPU_FS_64K_LS */
-
 static const struct file_operations spufs_mem_fops = {
 	.open			= spufs_mem_open,
 	.release		= spufs_mem_release,
@@ -362,9 +310,6 @@ static const struct file_operations spufs_mem_fops = {
 	.write			= spufs_mem_write,
 	.llseek			= generic_file_llseek,
 	.mmap			= spufs_mem_mmap,
-#ifdef CONFIG_SPU_FS_64K_LS
-	.get_unmapped_area	= spufs_get_unmapped_area,
-#endif
 };
 
 static int spufs_ps_fault(struct vm_area_struct *vma,
diff --git a/arch/powerpc/platforms/cell/spufs/lscsa_alloc.c b/arch/powerpc/platforms/cell/spufs/lscsa_alloc.c
index 147069938cfe..b847e9403566 100644
--- a/arch/powerpc/platforms/cell/spufs/lscsa_alloc.c
+++ b/arch/powerpc/platforms/cell/spufs/lscsa_alloc.c
@@ -31,7 +31,7 @@
 
 #include "spufs.h"
 
-static int spu_alloc_lscsa_std(struct spu_state *csa)
+int spu_alloc_lscsa(struct spu_state *csa)
 {
 	struct spu_lscsa *lscsa;
 	unsigned char *p;
@@ -48,7 +48,7 @@ static int spu_alloc_lscsa_std(struct spu_state *csa)
 	return 0;
 }
 
-static void spu_free_lscsa_std(struct spu_state *csa)
+void spu_free_lscsa(struct spu_state *csa)
 {
 	/* Clear reserved bit before vfree. */
 	unsigned char *p;
@@ -61,123 +61,3 @@ static void spu_free_lscsa_std(struct spu_state *csa)
 
 	vfree(csa->lscsa);
 }
-
-#ifdef CONFIG_SPU_FS_64K_LS
-
-#define SPU_64K_PAGE_SHIFT	16
-#define SPU_64K_PAGE_ORDER	(SPU_64K_PAGE_SHIFT - PAGE_SHIFT)
-#define SPU_64K_PAGE_COUNT	(1ul << SPU_64K_PAGE_ORDER)
-
-int spu_alloc_lscsa(struct spu_state *csa)
-{
-	struct page	**pgarray;
-	unsigned char	*p;
-	int		i, j, n_4k;
-
-	/* Check availability of 64K pages */
-	if (!spu_64k_pages_available())
-		goto fail;
-
-	csa->use_big_pages = 1;
-
-	pr_debug("spu_alloc_lscsa(csa=0x%p), trying to allocate 64K pages\n",
-		 csa);
-
-	/* First try to allocate our 64K pages. We need 5 of them
-	 * with the current implementation. In the future, we should try
-	 * to separate the lscsa with the actual local store image, thus
-	 * allowing us to require only 4 64K pages per context
-	 */
-	for (i = 0; i < SPU_LSCSA_NUM_BIG_PAGES; i++) {
-		/* XXX This is likely to fail, we should use a special pool
-		 *     similar to what hugetlbfs does.
-		 */
-		csa->lscsa_pages[i] = alloc_pages(GFP_KERNEL,
-						  SPU_64K_PAGE_ORDER);
-		if (csa->lscsa_pages[i] == NULL)
-			goto fail;
-	}
-
-	pr_debug(" success ! creating vmap...\n");
-
-	/* Now we need to create a vmalloc mapping of these for the kernel
-	 * and SPU context switch code to use. Currently, we stick to a
-	 * normal kernel vmalloc mapping, which in our case will be 4K
-	 */
-	n_4k = SPU_64K_PAGE_COUNT * SPU_LSCSA_NUM_BIG_PAGES;
-	pgarray = kmalloc(sizeof(struct page *) * n_4k, GFP_KERNEL);
-	if (pgarray == NULL)
-		goto fail;
-	for (i = 0; i < SPU_LSCSA_NUM_BIG_PAGES; i++)
-		for (j = 0; j < SPU_64K_PAGE_COUNT; j++)
-			/* We assume all the struct page's are contiguous
-			 * which should be hopefully the case for an order 4
-			 * allocation..
-			 */
-			pgarray[i * SPU_64K_PAGE_COUNT + j] =
-				csa->lscsa_pages[i] + j;
-	csa->lscsa = vmap(pgarray, n_4k, VM_USERMAP, PAGE_KERNEL);
-	kfree(pgarray);
-	if (csa->lscsa == NULL)
-		goto fail;
-
-	memset(csa->lscsa, 0, sizeof(struct spu_lscsa));
-
-	/* Set LS pages reserved to allow for user-space mapping.
-	 *
-	 * XXX isn't that a bit obsolete ? I think we should just
-	 * make sure the page count is high enough. Anyway, won't harm
-	 * for now
-	 */
-	for (p = csa->lscsa->ls; p < csa->lscsa->ls + LS_SIZE; p += PAGE_SIZE)
-		SetPageReserved(vmalloc_to_page(p));
-
-	pr_debug(" all good !\n");
-
-	return 0;
-fail:
-	pr_debug("spufs: failed to allocate lscsa 64K pages, falling back\n");
-	spu_free_lscsa(csa);
-	return spu_alloc_lscsa_std(csa);
-}
-
-void spu_free_lscsa(struct spu_state *csa)
-{
-	unsigned char *p;
-	int i;
-
-	if (!csa->use_big_pages) {
-		spu_free_lscsa_std(csa);
-		return;
-	}
-	csa->use_big_pages = 0;
-
-	if (csa->lscsa == NULL)
-		goto free_pages;
-
-	for (p = csa->lscsa->ls; p < csa->lscsa->ls + LS_SIZE; p += PAGE_SIZE)
-		ClearPageReserved(vmalloc_to_page(p));
-
-	vunmap(csa->lscsa);
-	csa->lscsa = NULL;
-
- free_pages:
-
-	for (i = 0; i < SPU_LSCSA_NUM_BIG_PAGES; i++)
-		if (csa->lscsa_pages[i])
-			__free_pages(csa->lscsa_pages[i], SPU_64K_PAGE_ORDER);
-}
-
-#else /* CONFIG_SPU_FS_64K_LS */
-
-int spu_alloc_lscsa(struct spu_state *csa)
-{
-	return spu_alloc_lscsa_std(csa);
-}
-
-void spu_free_lscsa(struct spu_state *csa)
-{
-	spu_free_lscsa_std(csa);
-}
-
-#endif /* !defined(CONFIG_SPU_FS_64K_LS) */

From 953005770ec3b52132a4cdbdbce74bd0de2b8490 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <mpe@ellerman.id.au>
Date: Fri, 7 Aug 2015 16:19:45 +1000
Subject: [PATCH 106/140] powerpc/mm: Drop the 64K on 4K version of
 pte_pagesize_index()

Now that support for 64k pages with a 4K kernel is removed, this code is
unreachable.

CONFIG_PPC_HAS_HASH_64K can only be true when CONFIG_PPC_64K_PAGES is
also true.

But when CONFIG_PPC_64K_PAGES is true we include pte-hash64.h which
includes pte-hash64-64k.h, which defines both pte_pagesize_index() and
crucially __real_pte, which means this definition can never be used.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/pgtable-ppc64.h | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index 7ee2300ee392..fa1dfb7f7b48 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -134,23 +134,11 @@
 
 #define pte_iterate_hashed_end() } while(0)
 
-#ifdef CONFIG_PPC_HAS_HASH_64K
 /*
  * We expect this to be called only for user addresses or kernel virtual
  * addresses other than the linear mapping.
  */
-#define pte_pagesize_index(mm, addr, pte)			\
-	({							\
-		unsigned int psize;				\
-		if (is_kernel_addr(addr))			\
-			psize = MMU_PAGE_4K;			\
-		else						\
-			psize = get_slice_psize(mm, addr);	\
-		psize;						\
-	})
-#else
 #define pte_pagesize_index(mm, addr, pte)	MMU_PAGE_4K
-#endif
 
 #endif /* __real_pte */
 

From 55f8b5b82fe7ab21da4153ed177b6fe17b1d59a3 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <mpe@ellerman.id.au>
Date: Fri, 7 Aug 2015 16:19:46 +1000
Subject: [PATCH 107/140] powerpc/mm: Simplify page size kconfig dependencies

For config options with only a single value, guarding the single value
with 'if' is the same as adding a 'depends' statement. And it's more
standard to just use 'depends'.

And if the option has both an 'if' guard and a 'depends' we can collapse
them into a single 'depends' by combining them with &&.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
 arch/powerpc/Kconfig | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 4139644030fb..b77035f53491 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -565,16 +565,17 @@ config PPC_4K_PAGES
 	bool "4k page size"
 
 config PPC_16K_PAGES
-	bool "16k page size" if 44x || PPC_8xx
+	bool "16k page size"
+	depends on 44x || PPC_8xx
 
 config PPC_64K_PAGES
-	bool "64k page size" if 44x || PPC_STD_MMU_64 || PPC_BOOK3E_64
-	depends on !PPC_FSL_BOOK3E
+	bool "64k page size"
+	depends on !PPC_FSL_BOOK3E && (44x || PPC_STD_MMU_64 || PPC_BOOK3E_64)
 	select PPC_HAS_HASH_64K if PPC_STD_MMU_64
 
 config PPC_256K_PAGES
-	bool "256k page size" if 44x
-	depends on !STDBINUTILS
+	bool "256k page size"
+	depends on 44x && !STDBINUTILS
 	help
 	  Make the page size 256k.
 

From 73b341efda6664afbb0b6884eae60f04208b4128 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <mpe@ellerman.id.au>
Date: Fri, 7 Aug 2015 16:19:47 +1000
Subject: [PATCH 108/140] powerpc/mm: Drop CONFIG_PPC_HAS_HASH_64K

The relation between CONFIG_PPC_HAS_HASH_64K and CONFIG_PPC_64K_PAGES is
painfully complicated.

But if we rearrange it enough we can see that PPC_HAS_HASH_64K
essentially depends on PPC_STD_MMU_64 && PPC_64K_PAGES.

We can then notice that PPC_HAS_HASH_64K is used in files that are only
built for PPC_STD_MMU_64, meaning it's equivalent to PPC_64K_PAGES.

So replace all uses and drop it.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
 arch/powerpc/Kconfig            |  6 ------
 arch/powerpc/mm/hash_low_64.S   |  4 ++--
 arch/powerpc/mm/hash_utils_64.c | 12 ++++++------
 3 files changed, 8 insertions(+), 14 deletions(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index b77035f53491..b447918b9e2c 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -519,11 +519,6 @@ config NODES_SPAN_OTHER_NODES
 	def_bool y
 	depends on NEED_MULTIPLE_NODES
 
-config PPC_HAS_HASH_64K
-	bool
-	depends on PPC64
-	default n
-
 config STDBINUTILS
 	bool "Using standard binutils settings"
 	depends on 44x
@@ -571,7 +566,6 @@ config PPC_16K_PAGES
 config PPC_64K_PAGES
 	bool "64k page size"
 	depends on !PPC_FSL_BOOK3E && (44x || PPC_STD_MMU_64 || PPC_BOOK3E_64)
-	select PPC_HAS_HASH_64K if PPC_STD_MMU_64
 
 config PPC_256K_PAGES
 	bool "256k page size"
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index 463174a4a647..3b49e3295901 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -701,7 +701,7 @@ htab_pte_insert_failure:
 
 #endif /* CONFIG_PPC_64K_PAGES */
 
-#ifdef CONFIG_PPC_HAS_HASH_64K
+#ifdef CONFIG_PPC_64K_PAGES
 
 /*****************************************************************************
  *                                                                           *
@@ -993,7 +993,7 @@ ht64_pte_insert_failure:
 	b	ht64_bail
 
 
-#endif /* CONFIG_PPC_HAS_HASH_64K */
+#endif /* CONFIG_PPC_64K_PAGES */
 
 
 /*****************************************************************************
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 5ec987f65b2c..aee70171355b 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -640,7 +640,7 @@ extern u32 ht64_call_hpte_updatepp[];
 
 static void __init htab_finish_init(void)
 {
-#ifdef CONFIG_PPC_HAS_HASH_64K
+#ifdef CONFIG_PPC_64K_PAGES
 	patch_branch(ht64_call_hpte_insert1,
 		ppc_function_entry(ppc_md.hpte_insert),
 		BRANCH_SET_LINK);
@@ -653,7 +653,7 @@ static void __init htab_finish_init(void)
 	patch_branch(ht64_call_hpte_updatepp,
 		ppc_function_entry(ppc_md.hpte_updatepp),
 		BRANCH_SET_LINK);
-#endif /* CONFIG_PPC_HAS_HASH_64K */
+#endif /* CONFIG_PPC_64K_PAGES */
 
 	patch_branch(htab_call_hpte_insert1,
 		ppc_function_entry(ppc_md.hpte_insert),
@@ -1151,12 +1151,12 @@ int hash_page_mm(struct mm_struct *mm, unsigned long ea,
 		check_paca_psize(ea, mm, psize, user_region);
 #endif /* CONFIG_PPC_64K_PAGES */
 
-#ifdef CONFIG_PPC_HAS_HASH_64K
+#ifdef CONFIG_PPC_64K_PAGES
 	if (psize == MMU_PAGE_64K)
 		rc = __hash_page_64K(ea, access, vsid, ptep, trap,
 				     flags, ssize);
 	else
-#endif /* CONFIG_PPC_HAS_HASH_64K */
+#endif /* CONFIG_PPC_64K_PAGES */
 	{
 		int spp = subpage_protection(mm, ea);
 		if (access & spp)
@@ -1264,12 +1264,12 @@ void hash_preload(struct mm_struct *mm, unsigned long ea,
 		update_flags |= HPTE_LOCAL_UPDATE;
 
 	/* Hash it in */
-#ifdef CONFIG_PPC_HAS_HASH_64K
+#ifdef CONFIG_PPC_64K_PAGES
 	if (mm->context.user_psize == MMU_PAGE_64K)
 		rc = __hash_page_64K(ea, access, vsid, ptep, trap,
 				     update_flags, ssize);
 	else
-#endif /* CONFIG_PPC_HAS_HASH_64K */
+#endif /* CONFIG_PPC_64K_PAGES */
 		rc = __hash_page_4K(ea, access, vsid, ptep, trap, update_flags,
 				    ssize, subpage_protection(mm, ea));
 

From 53522982fc3c254bb4444c336cb005c8636930c8 Mon Sep 17 00:00:00 2001
From: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Date: Fri, 7 Aug 2015 13:45:54 +1000
Subject: [PATCH 109/140] powerpc/powernv: move dma_get_required_mask from
 pnv_phb to pci_controller_ops

Simplify the dma_get_required_mask call chain by moving it from pnv_phb to
pci_controller_ops, similar to commit 763d2d8df1ee ("powerpc/powernv:
Move dma_set_mask from pnv_phb to pci_controller_ops").

Previous call chain:

  0) call dma_get_required_mask() (kernel/dma.c)
  1) call ppc_md.dma_get_required_mask, if it exists. On powernv, that
     points to pnv_dma_get_required_mask() (platforms/powernv/setup.c)
  2) device is PCI, therefore call pnv_pci_dma_get_required_mask()
     (platforms/powernv/pci.c)
  3) call phb->dma_get_required_mask if it exists
  4) it only exists in the ioda case, where it points to
       pnv_pci_ioda_dma_get_required_mask() (platforms/powernv/pci-ioda.c)

New call chain:

  0) call dma_get_required_mask() (kernel/dma.c)
  1) device is PCI, therefore call pci_controller_ops.dma_get_required_mask
     if it exists
  2) in the ioda case, that points to pnv_pci_ioda_dma_get_required_mask()
     (platforms/powernv/pci-ioda.c)

In the p5ioc2 case, the call chain remains the same -
dma_get_required_mask() does not find either a ppc_md call or
pci_controller_ops call, so it calls __dma_get_required_mask().

Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/pci-bridge.h     |  1 +
 arch/powerpc/kernel/dma.c                 |  7 +++++++
 arch/powerpc/platforms/powernv/pci-ioda.c |  7 ++++---
 arch/powerpc/platforms/powernv/pci.c      | 11 -----------
 arch/powerpc/platforms/powernv/pci.h      |  2 --
 arch/powerpc/platforms/powernv/powernv.h  |  6 ------
 arch/powerpc/platforms/powernv/setup.c    |  9 ---------
 7 files changed, 12 insertions(+), 31 deletions(-)

diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 712add590445..37fc53587bb4 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -42,6 +42,7 @@ struct pci_controller_ops {
 #endif
 
 	int             (*dma_set_mask)(struct pci_dev *dev, u64 dma_mask);
+	u64		(*dma_get_required_mask)(struct pci_dev *dev);
 
 	void		(*shutdown)(struct pci_controller *);
 };
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 1558f81ac1ff..59503ed98e5f 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -353,6 +353,13 @@ u64 dma_get_required_mask(struct device *dev)
 	if (ppc_md.dma_get_required_mask)
 		return ppc_md.dma_get_required_mask(dev);
 
+	if (dev_is_pci(dev)) {
+		struct pci_dev *pdev = to_pci_dev(dev);
+		struct pci_controller *phb = pci_bus_to_host(pdev->bus);
+		if (phb->controller_ops.dma_get_required_mask)
+			return phb->controller_ops.dma_get_required_mask(pdev);
+	}
+
 	return __dma_get_required_mask(dev);
 }
 EXPORT_SYMBOL_GPL(dma_get_required_mask);
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index fdafbaccafbe..528cd1e0b5ae 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1597,9 +1597,10 @@ static int pnv_pci_ioda_dma_set_mask(struct pci_dev *pdev, u64 dma_mask)
 	return 0;
 }
 
-static u64 pnv_pci_ioda_dma_get_required_mask(struct pnv_phb *phb,
-					      struct pci_dev *pdev)
+static u64 pnv_pci_ioda_dma_get_required_mask(struct pci_dev *pdev)
 {
+	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+	struct pnv_phb *phb = hose->private_data;
 	struct pci_dn *pdn = pci_get_pdn(pdev);
 	struct pnv_ioda_pe *pe;
 	u64 end, mask;
@@ -3024,6 +3025,7 @@ static const struct pci_controller_ops pnv_pci_ioda_controller_ops = {
        .window_alignment = pnv_pci_window_alignment,
        .reset_secondary_bus = pnv_pci_reset_secondary_bus,
        .dma_set_mask = pnv_pci_ioda_dma_set_mask,
+       .dma_get_required_mask = pnv_pci_ioda_dma_get_required_mask,
        .shutdown = pnv_pci_ioda_shutdown,
 };
 
@@ -3170,7 +3172,6 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 
 	/* Setup TCEs */
 	phb->dma_dev_setup = pnv_pci_ioda_dma_dev_setup;
-	phb->dma_get_required_mask = pnv_pci_ioda_dma_get_required_mask;
 
 	/* Setup MSI support */
 	pnv_pci_init_ioda_msis(phb);
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 765d8ed558d0..3e7f6fda00cf 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -761,17 +761,6 @@ void pnv_pci_dma_dev_setup(struct pci_dev *pdev)
 		phb->dma_dev_setup(phb, pdev);
 }
 
-u64 pnv_pci_dma_get_required_mask(struct pci_dev *pdev)
-{
-	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
-	struct pnv_phb *phb = hose->private_data;
-
-	if (phb && phb->dma_get_required_mask)
-		return phb->dma_get_required_mask(phb, pdev);
-
-	return __dma_get_required_mask(&pdev->dev);
-}
-
 void pnv_pci_shutdown(void)
 {
 	struct pci_controller *hose;
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index e891ff48d7e6..c8ff50e90766 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -105,8 +105,6 @@ struct pnv_phb {
 			 unsigned int hwirq, unsigned int virq,
 			 unsigned int is_64, struct msi_msg *msg);
 	void (*dma_dev_setup)(struct pnv_phb *phb, struct pci_dev *pdev);
-	u64 (*dma_get_required_mask)(struct pnv_phb *phb,
-				     struct pci_dev *pdev);
 	void (*fixup_phb)(struct pci_controller *hose);
 	u32 (*bdfn_to_pe)(struct pnv_phb *phb, struct pci_bus *bus, u32 devfn);
 	int (*init_m64)(struct pnv_phb *phb);
diff --git a/arch/powerpc/platforms/powernv/powernv.h b/arch/powerpc/platforms/powernv/powernv.h
index 9269e30e4ca0..6dbc0a1da1f6 100644
--- a/arch/powerpc/platforms/powernv/powernv.h
+++ b/arch/powerpc/platforms/powernv/powernv.h
@@ -12,15 +12,9 @@ struct pci_dev;
 #ifdef CONFIG_PCI
 extern void pnv_pci_init(void);
 extern void pnv_pci_shutdown(void);
-extern u64 pnv_pci_dma_get_required_mask(struct pci_dev *pdev);
 #else
 static inline void pnv_pci_init(void) { }
 static inline void pnv_pci_shutdown(void) { }
-
-static inline u64 pnv_pci_dma_get_required_mask(struct pci_dev *pdev)
-{
-	return 0;
-}
 #endif
 
 extern u32 pnv_get_supported_cpuidle_states(void);
diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
index 53737e019ae3..77a31c1474a5 100644
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -165,14 +165,6 @@ static void pnv_progress(char *s, unsigned short hex)
 {
 }
 
-static u64 pnv_dma_get_required_mask(struct device *dev)
-{
-	if (dev_is_pci(dev))
-		return pnv_pci_dma_get_required_mask(to_pci_dev(dev));
-
-	return __dma_get_required_mask(dev);
-}
-
 static void pnv_shutdown(void)
 {
 	/* Let the PCI code clear up IODA tables */
@@ -314,7 +306,6 @@ define_machine(powernv) {
 	.machine_shutdown	= pnv_shutdown,
 	.power_save             = power7_idle,
 	.calibrate_decr		= generic_calibrate_decr,
-	.dma_get_required_mask	= pnv_dma_get_required_mask,
 #ifdef CONFIG_KEXEC
 	.kexec_cpu_down		= pnv_kexec_cpu_down,
 #endif

From 1d805440a364b4a68562e70119d8f94456698e55 Mon Sep 17 00:00:00 2001
From: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Date: Thu, 2 Jul 2015 11:09:01 +0530
Subject: [PATCH 110/140] powerpc/numa: initialize distance lookup table from
 drconf path

In some situations, a NUMA guest that supports
ibm,dynamic-memory-reconfiguration node will end up having flat NUMA
distances between nodes. This is because of two problems in the
current code.

1) Different representations of associativity lists.

   There is an assumption about the associativity list in
   initialize_distance_lookup_table(). Associativity list has two forms:

   a) [cpu,memory]@x/ibm,associativity has following
      format:
           <N> <N integers>

   b) ibm,dynamic-reconfiguration-memory/ibm,associativity-lookup-arrays

           <M> <N> <M associativity lists each having N integers>
           M = the number of associativity lists
           N = the number of entries per associativity list

   Fix initialize_distance_lookup_table() so that it does not assume
   "case a". And update the caller to skip the length field before
   sending the associativity list.

2) Distance table not getting updated from drconf path.

   Node distance table will not get initialized in certain cases as
   ibm,dynamic-reconfiguration-memory path does not initialize the
   lookup table.

   Call initialize_distance_lookup_table() from drconf path with
   appropriate associativity list.

Reported-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Acked-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/mm/numa.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 5e80621d9324..8b9502adaf79 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -225,7 +225,7 @@ static void initialize_distance_lookup_table(int nid,
 	for (i = 0; i < distance_ref_points_depth; i++) {
 		const __be32 *entry;
 
-		entry = &associativity[be32_to_cpu(distance_ref_points[i])];
+		entry = &associativity[be32_to_cpu(distance_ref_points[i]) - 1];
 		distance_lookup_table[nid][i] = of_read_number(entry, 1);
 	}
 }
@@ -248,8 +248,12 @@ static int associativity_to_nid(const __be32 *associativity)
 		nid = -1;
 
 	if (nid > 0 &&
-	    of_read_number(associativity, 1) >= distance_ref_points_depth)
-		initialize_distance_lookup_table(nid, associativity);
+		of_read_number(associativity, 1) >= distance_ref_points_depth) {
+		/*
+		 * Skip the length field and send start of associativity array
+		 */
+		initialize_distance_lookup_table(nid, associativity + 1);
+	}
 
 out:
 	return nid;
@@ -507,6 +511,12 @@ static int of_drconf_to_nid_single(struct of_drconf_cell *drmem,
 
 		if (nid == 0xffff || nid >= MAX_NUMNODES)
 			nid = default_nid;
+
+		if (nid > 0) {
+			index = drmem->aa_index * aa->array_sz;
+			initialize_distance_lookup_table(nid,
+							&aa->arrays[index]);
+		}
 	}
 
 	return nid;

From e0ad784b65a64a617179598addb417d49dd4e08f Mon Sep 17 00:00:00 2001
From: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Date: Fri, 3 Jul 2015 10:41:20 +0530
Subject: [PATCH 111/140] powerpc/pseries: enable RTC class support

A working rtc kernel driver is needed so that hwclock can synchronize
system clock to rtc during shutdown/boot. We already have a powernv
platform rtc driver located at drivers/rtc/rtc-opal.c. However it depends
on CONFIG_RTC_CLASS which is disabled by default. Hence the driver isn't
enabled and not compiled for the powernv kernel.

We fix this by enabling rtc class support in pseries defconfig which
enables this driver and compiles it into the pseries kernel. In case
CONFIG_PPC_POWERNV is not enabled we fallback to 'Generic RTC support'
driver which emulates the legacy 'PC RTC driver'.

Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/configs/pseries_defconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 0d9efcedaf34..2404271ec4ae 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -190,7 +190,8 @@ CONFIG_HVC_RTAS=y
 CONFIG_HVCS=m
 CONFIG_VIRTIO_CONSOLE=m
 CONFIG_IBM_BSR=m
-CONFIG_GEN_RTC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_GENERIC=y
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=1024
 CONFIG_FB=y

From dd497154d359ba9d2d3e71075bed794b93b47b48 Mon Sep 17 00:00:00 2001
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
Date: Tue, 18 Aug 2015 10:57:40 +1000
Subject: [PATCH 112/140] powerpc: Export include/uapi/asm/eeh.h

This adds include/uapi/asm/eeh.h to kbuild so that the header
file will be exported automatically with below command. The
header file was added by commit ed3e81ff2016 ("powerpc/eeh: Move PE
state constants around")

   make INSTALL_HDR_PATH=/tmp/headers \
        SRCARCH=powerpc headers_install

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/uapi/asm/Kbuild | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/include/uapi/asm/Kbuild b/arch/powerpc/include/uapi/asm/Kbuild
index f44a027818af..dab3717e3ea0 100644
--- a/arch/powerpc/include/uapi/asm/Kbuild
+++ b/arch/powerpc/include/uapi/asm/Kbuild
@@ -6,6 +6,7 @@ header-y += bitsperlong.h
 header-y += bootx.h
 header-y += byteorder.h
 header-y += cputable.h
+header-y += eeh.h
 header-y += elf.h
 header-y += epapr_hcalls.h
 header-y += errno.h

From 39bfd715b4837433a86c168c610880e9ae2185ae Mon Sep 17 00:00:00 2001
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
Date: Thu, 30 Jul 2015 09:26:51 +1000
Subject: [PATCH 113/140] powerpc/eeh: Disable automatically blocked PCI config

pcibios_set_pcie_reset_state() could be called to complete
reset request when passing through PCI device, flag
EEH_PE_ISOLATED is set before saving the PCI config sapce.
On some Broadcom adapters, EEH_PE_CFG_BLOCKED is automatically
set when the flag EEH_PE_ISOLATED is marked. It caused bogus
data saved from the PCI config space, which will be restored
to the PCI adapter after the reset. Eventually, the hardware
can't work with corrupted data in PCI config space.

The patch fixes the issue with eeh_pe_state_mark_no_cfg(), which
doesn't set EEH_PE_CFG_BLOCKED when seeing EEH_PE_ISOLATED on the
PE, in order to avoid the bogus data saved and restored to the PCI
config space.

Reported-by: Rajanikanth H. Adaveeshaiah <rajanikanth.ha@in.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/ppc-pci.h |  1 +
 arch/powerpc/kernel/eeh.c          |  4 ++--
 arch/powerpc/kernel/eeh_pe.c       | 22 ++++++++++++++++++++++
 3 files changed, 25 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h
index 4122a86d6858..ca0c5bff7849 100644
--- a/arch/powerpc/include/asm/ppc-pci.h
+++ b/arch/powerpc/include/asm/ppc-pci.h
@@ -61,6 +61,7 @@ int rtas_write_config(struct pci_dn *, int where, int size, u32 val);
 int rtas_read_config(struct pci_dn *, int where, int size, u32 *val);
 void eeh_pe_state_mark(struct eeh_pe *pe, int state);
 void eeh_pe_state_clear(struct eeh_pe *pe, int state);
+void eeh_pe_state_mark_with_cfg(struct eeh_pe *pe, int state);
 void eeh_pe_dev_mode_mark(struct eeh_pe *pe, int mode);
 
 void eeh_sysfs_add_device(struct pci_dev *pdev);
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 8e61d717915e..58c598400028 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -750,14 +750,14 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat
 		eeh_pe_state_clear(pe, EEH_PE_ISOLATED);
 		break;
 	case pcie_hot_reset:
-		eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
+		eeh_pe_state_mark_with_cfg(pe, EEH_PE_ISOLATED);
 		eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE);
 		eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev);
 		eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
 		eeh_ops->reset(pe, EEH_RESET_HOT);
 		break;
 	case pcie_warm_reset:
-		eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
+		eeh_pe_state_mark_with_cfg(pe, EEH_PE_ISOLATED);
 		eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE);
 		eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev);
 		eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c
index 35f0b62259bb..8654cb166c19 100644
--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -657,6 +657,28 @@ void eeh_pe_state_clear(struct eeh_pe *pe, int state)
 	eeh_pe_traverse(pe, __eeh_pe_state_clear, &state);
 }
 
+/**
+ * eeh_pe_state_mark_with_cfg - Mark PE state with unblocked config space
+ * @pe: PE
+ * @state: PE state to be set
+ *
+ * Set specified flag to PE and its child PEs. The PCI config space
+ * of some PEs is blocked automatically when EEH_PE_ISOLATED is set,
+ * which isn't needed in some situations. The function allows to set
+ * the specified flag to indicated PEs without blocking their PCI
+ * config space.
+ */
+void eeh_pe_state_mark_with_cfg(struct eeh_pe *pe, int state)
+{
+	eeh_pe_traverse(pe, __eeh_pe_state_mark, &state);
+	if (!(state & EEH_PE_ISOLATED))
+		return;
+
+	/* Clear EEH_PE_CFG_BLOCKED, which might be set just now */
+	state = EEH_PE_CFG_BLOCKED;
+	eeh_pe_traverse(pe, __eeh_pe_state_clear, &state);
+}
+
 /*
  * Some PCI bridges (e.g. PLX bridges) have primary/secondary
  * buses assigned explicitly by firmware, and we probably have

From 2e16acc5ee3626bcd32e2252c8260b65efde7b36 Mon Sep 17 00:00:00 2001
From: Andrzej Hajda <a.hajda@samsung.com>
Date: Fri, 7 Aug 2015 09:59:12 +0200
Subject: [PATCH 114/140] powerpc/pseries: use kmemdup rather than duplicating
 its implementation

The patch was generated using fixed coccinelle semantic patch
scripts/coccinelle/api/memdup.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2014320

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/platforms/pseries/hotplug-memory.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index 0ced387e1463..e9ff44cd5d86 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -92,13 +92,12 @@ static struct property *dlpar_clone_drconf_property(struct device_node *dn)
 		return NULL;
 
 	new_prop->name = kstrdup(prop->name, GFP_KERNEL);
-	new_prop->value = kmalloc(prop->length, GFP_KERNEL);
+	new_prop->value = kmemdup(prop->value, prop->length, GFP_KERNEL);
 	if (!new_prop->name || !new_prop->value) {
 		dlpar_free_drconf_property(new_prop);
 		return NULL;
 	}
 
-	memcpy(new_prop->value, prop->value, prop->length);
 	new_prop->length = prop->length;
 
 	/* Convert the property to cpu endian-ness */

From fc9e9cbf4e48f28525edd27e285820988f1a54b1 Mon Sep 17 00:00:00 2001
From: Andrzej Hajda <a.hajda@samsung.com>
Date: Fri, 7 Aug 2015 09:59:11 +0200
Subject: [PATCH 115/140] powerpc/nvram: use kmemdup rather than duplicating
 its implementation

The patch was generated using fixed coccinelle semantic patch
scripts/coccinelle/api/memdup.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2014320

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/nvram_64.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c
index 1e703f8ebad4..6f6597b3966b 100644
--- a/arch/powerpc/kernel/nvram_64.c
+++ b/arch/powerpc/kernel/nvram_64.c
@@ -541,10 +541,9 @@ static ssize_t nvram_pstore_read(u64 *id, enum pstore_type_id *type,
 			time->tv_sec = be64_to_cpu(oops_hdr->timestamp);
 			time->tv_nsec = 0;
 		}
-		*buf = kmalloc(length, GFP_KERNEL);
+		*buf = kmemdup(buff + hdr_size, length, GFP_KERNEL);
 		if (*buf == NULL)
 			return -ENOMEM;
-		memcpy(*buf, buff + hdr_size, length);
 		kfree(buff);
 
 		if (err_type == ERR_TYPE_KERNEL_PANIC_GZ)

From d9232a3da8683cd9c9854a858bcca968fe5f3bca Mon Sep 17 00:00:00 2001
From: Ian Munsie <imunsie@au1.ibm.com>
Date: Thu, 23 Jul 2015 16:43:56 +1000
Subject: [PATCH 116/140] cxl: Add alternate MMIO error handling

userspace programs using cxl currently have to use two strategies for
dealing with MMIO errors simultaneously. They have to check every read
for a return of all Fs in case the adapter has gone away and the kernel
has not yet noticed, and they have to deal with SIGBUS in case the
kernel has already noticed, invalidated the mapping and marked the
context as failed.

In order to simplify things, this patch adds an alternative approach
where the kernel will return a page filled with Fs instead of delivering
a SIGBUS. This allows userspace to only need to deal with one of these
two error paths, and is intended for use in libraries that use cxl
transparently and may not be able to safely install a signal handler.

This approach will only work if certain constraints are met. Namely, if
the application is both reading and writing to an address in the problem
state area it cannot assume that a non-FF read is OK, as it may just be
reading out a value it has previously written. Further - since only one
page is used per context a write to a given offset would be visible when
reading the same offset from a different page in the mapping (this only
applies within a single context, not between contexts).

An application could deal with this by e.g. making sure it also reads
from a read-only offset after any reads to a read/write offset.

Due to these constraints, this functionality must be explicitly
requested by userspace when starting the context by passing in the
CXL_START_WORK_ERR_FF flag.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/context.c | 14 ++++++++++++++
 drivers/misc/cxl/cxl.h     |  4 +++-
 drivers/misc/cxl/file.c    |  4 +++-
 include/uapi/misc/cxl.h    |  4 +++-
 4 files changed, 23 insertions(+), 3 deletions(-)

diff --git a/drivers/misc/cxl/context.c b/drivers/misc/cxl/context.c
index 615842115848..941fda04aa9a 100644
--- a/drivers/misc/cxl/context.c
+++ b/drivers/misc/cxl/context.c
@@ -126,6 +126,18 @@ static int cxl_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 	if (ctx->status != STARTED) {
 		mutex_unlock(&ctx->status_mutex);
 		pr_devel("%s: Context not started, failing problem state access\n", __func__);
+		if (ctx->mmio_err_ff) {
+			if (!ctx->ff_page) {
+				ctx->ff_page = alloc_page(GFP_USER);
+				if (!ctx->ff_page)
+					return VM_FAULT_OOM;
+				memset(page_address(ctx->ff_page), 0xff, PAGE_SIZE);
+			}
+			get_page(ctx->ff_page);
+			vmf->page = ctx->ff_page;
+			vma->vm_page_prot = pgprot_cached(vma->vm_page_prot);
+			return 0;
+		}
 		return VM_FAULT_SIGBUS;
 	}
 
@@ -257,6 +269,8 @@ static void reclaim_ctx(struct rcu_head *rcu)
 	struct cxl_context *ctx = container_of(rcu, struct cxl_context, rcu);
 
 	free_page((u64)ctx->sstp);
+	if (ctx->ff_page)
+		__free_page(ctx->ff_page);
 	ctx->sstp = NULL;
 
 	kfree(ctx);
diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h
index 6f5386653dae..e7af256f60c5 100644
--- a/drivers/misc/cxl/cxl.h
+++ b/drivers/misc/cxl/cxl.h
@@ -34,7 +34,7 @@ extern uint cxl_verbose;
  * Bump version each time a user API change is made, whether it is
  * backwards compatible ot not.
  */
-#define CXL_API_VERSION 1
+#define CXL_API_VERSION 2
 #define CXL_API_VERSION_COMPATIBLE 1
 
 /*
@@ -418,6 +418,8 @@ struct cxl_context {
 	/* Used to unmap any mmaps when force detaching */
 	struct address_space *mapping;
 	struct mutex mapping_lock;
+	struct page *ff_page;
+	bool mmio_err_ff;
 
 	spinlock_t sste_lock; /* Protects segment table entries */
 	struct cxl_sste *sstp;
diff --git a/drivers/misc/cxl/file.c b/drivers/misc/cxl/file.c
index 57bdb473749f..a30bf285b5bd 100644
--- a/drivers/misc/cxl/file.c
+++ b/drivers/misc/cxl/file.c
@@ -184,6 +184,8 @@ static long afu_ioctl_start_work(struct cxl_context *ctx,
 	if (work.flags & CXL_START_WORK_AMR)
 		amr = work.amr & mfspr(SPRN_UAMOR);
 
+	ctx->mmio_err_ff = !!(work.flags & CXL_START_WORK_ERR_FF);
+
 	/*
 	 * We grab the PID here and not in the file open to allow for the case
 	 * where a process (master, some daemon, etc) has opened the chardev on
@@ -538,7 +540,7 @@ int __init cxl_file_init(void)
 	 * If these change we really need to update API.  Either change some
 	 * flags or update API version number CXL_API_VERSION.
 	 */
-	BUILD_BUG_ON(CXL_API_VERSION != 1);
+	BUILD_BUG_ON(CXL_API_VERSION != 2);
 	BUILD_BUG_ON(sizeof(struct cxl_ioctl_start_work) != 64);
 	BUILD_BUG_ON(sizeof(struct cxl_event_header) != 8);
 	BUILD_BUG_ON(sizeof(struct cxl_event_afu_interrupt) != 8);
diff --git a/include/uapi/misc/cxl.h b/include/uapi/misc/cxl.h
index 99a8ca15fe64..1e889aa8a36e 100644
--- a/include/uapi/misc/cxl.h
+++ b/include/uapi/misc/cxl.h
@@ -29,8 +29,10 @@ struct cxl_ioctl_start_work {
 
 #define CXL_START_WORK_AMR		0x0000000000000001ULL
 #define CXL_START_WORK_NUM_IRQS		0x0000000000000002ULL
+#define CXL_START_WORK_ERR_FF		0x0000000000000004ULL
 #define CXL_START_WORK_ALL		(CXL_START_WORK_AMR |\
-					 CXL_START_WORK_NUM_IRQS)
+					 CXL_START_WORK_NUM_IRQS |\
+					 CXL_START_WORK_ERR_FF)
 
 
 /* Possible modes that an afu can be in */

From 74943dab6b155b1a9d4037b7f01a396f28f9c44a Mon Sep 17 00:00:00 2001
From: Hari Bathini <hbathini@linux.vnet.ibm.com>
Date: Mon, 11 May 2015 13:53:43 +0530
Subject: [PATCH 117/140] powerpc/nvram: print no error when pstore backend is
 not nvram

Pstore only supports one backend at a time. The preferred
pstore backend is set by passing the pstore.backend=<name>
argument to the kernel at boot time. Currently, while trying
to register with pstore, nvram throws an error message even
when "pstore.backend != nvram", which is unnecessary. This
patch removes the error message in case "pstore.backend != nvram".

Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/nvram_64.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c
index 6f6597b3966b..98ba106a59ef 100644
--- a/arch/powerpc/kernel/nvram_64.c
+++ b/arch/powerpc/kernel/nvram_64.c
@@ -581,9 +581,10 @@ static int nvram_pstore_init(void)
 	spin_lock_init(&nvram_pstore_info.buf_lock);
 
 	rc = pstore_register(&nvram_pstore_info);
-	if (rc != 0)
-		pr_err("nvram: pstore_register() failed, defaults to "
-				"kmsg_dump; returned %d\n", rc);
+	if (rc && (rc != -EPERM))
+		/* Print error only when pstore.backend == nvram */
+		pr_err("nvram: pstore_register() failed, returned %d. "
+				"Defaults to kmsg_dump\n", rc);
 
 	return rc;
 }

From acf6cec8365bfe1e6435e503eae4eab48ee04fc8 Mon Sep 17 00:00:00 2001
From: Gerhard Sittig <gsi@denx.de>
Date: Mon, 3 Jun 2013 13:18:06 +0200
Subject: [PATCH 118/140] powerpc/512x: silence a USB Kconfig dependency
 warning

the PPC_MPC512x config automatically selected USB_EHCI_BIG_ENDIAN_*
switches, which made Kconfig warn about "unmet direct dependencies":

  scripts/kconfig/conf --silentoldconfig Kconfig
  warning: (PPC_MPC512x && 440EPX) selects USB_EHCI_BIG_ENDIAN_DESC which has unmet direct dependencies (USB_SUPPORT && USB && USB_EHCI_HCD)
  warning: (PPC_MPC512x && PPC_PS3 && PPC_CELLEB && 440EPX) selects USB_EHCI_BIG_ENDIAN_MMIO which has unmet direct dependencies (USB_SUPPORT && USB && USB_EHCI_HCD)
  warning: (PPC_MPC512x && 440EPX) selects USB_EHCI_BIG_ENDIAN_DESC which has unmet direct dependencies (USB_SUPPORT && USB && USB_EHCI_HCD)
  warning: (PPC_MPC512x && PPC_PS3 && PPC_CELLEB && 440EPX) selects USB_EHCI_BIG_ENDIAN_MMIO which has unmet direct dependencies (USB_SUPPORT && USB && USB_EHCI_HCD)

make the selected entries additionally depend on USB_EHCI_HCD which
silences the warning

Signed-off-by: Gerhard Sittig <gsi@denx.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/platforms/512x/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index 5aa3f4b5332c..48bf38d0de35 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -7,8 +7,8 @@ config PPC_MPC512x
 	select PPC_PCI_CHOICE
 	select FSL_PCI if PCI
 	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select USB_EHCI_BIG_ENDIAN_MMIO
-	select USB_EHCI_BIG_ENDIAN_DESC
+	select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
+	select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
 
 config MPC5121_ADS
 	bool "Freescale MPC5121E ADS"

From cb0eefcc3271ea1d370476dd29685918b99c5a9f Mon Sep 17 00:00:00 2001
From: Javier Martinez Canillas <javier@osg.samsung.com>
Date: Thu, 30 Jul 2015 18:18:30 +0200
Subject: [PATCH 119/140] macintosh/therm_windtunnel: Export I2C module alias
 information

The I2C core always reports the MODALIAS uevent as "i2c:<client name"
regardless if the driver was matched using the I2C id_table or the
of_match_table. So the driver needs to export the I2C table and this
be built into the module or udev won't have the necessary information
to auto load the correct module when the device is added.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/macintosh/therm_windtunnel.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c
index 109dcaa15934..97269567ec01 100644
--- a/drivers/macintosh/therm_windtunnel.c
+++ b/drivers/macintosh/therm_windtunnel.c
@@ -408,6 +408,7 @@ static const struct i2c_device_id therm_windtunnel_id[] = {
 	{ "therm_adm1030", adm1030 },
 	{ }
 };
+MODULE_DEVICE_TABLE(i2c, therm_windtunnel_id);
 
 static int
 do_probe(struct i2c_client *cl, const struct i2c_device_id *id)

From a1a42b7920ba57f287d742d42f113402fbb7c85e Mon Sep 17 00:00:00 2001
From: Javier Martinez Canillas <javier@osg.samsung.com>
Date: Thu, 30 Jul 2015 18:18:47 +0200
Subject: [PATCH 120/140] macintosh/therm_windtunnel: Export OF module alias
 information

The I2C core always reports the MODALIAS uevent as "i2c:<client name"
regardless if the driver was matched using the I2C id_table or the
of_match_table. So technically there's no need for a driver to export
the OF table since currently it's not used.

In fact, the I2C device ID table is mandatory for I2C drivers since
a i2c_device_id is passed to the driver's probe function even if the
I2C core used the OF table to match the driver.

And since the I2C core uses different tables, OF-only drivers needs to
have duplicated data that has to be kept in sync and also the dev node
compatible manufacturer prefix is stripped when reporting the MODALIAS.

To avoid the above, the I2C core behavior may be changed in the future
to not require an I2C device table for OF-only drivers and report the
OF module alias. So, it's better to also export the OF table to prevent
breaking module autoloading if that happens.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/macintosh/therm_windtunnel.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c
index 97269567ec01..68dcbcb4fc5b 100644
--- a/drivers/macintosh/therm_windtunnel.c
+++ b/drivers/macintosh/therm_windtunnel.c
@@ -460,6 +460,7 @@ static const struct of_device_id therm_of_match[] = {{
 	.compatible	= "adm1030"
     }, {}
 };
+MODULE_DEVICE_TABLE(of, therm_of_match);
 
 static struct platform_driver therm_of_driver = {
 	.driver = {

From 7c26b9cf5347c24272152438cdd9675183804425 Mon Sep 17 00:00:00 2001
From: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Date: Wed, 19 Aug 2015 09:27:18 +1000
Subject: [PATCH 121/140] cxl: Allow release of contexts which have been OPENED
 but not STARTED

If we open a context but do not start it (either because we do not attempt
to start it, or because it fails to start for some reason), we are left
with a context in state OPENED. Previously, cxl_release_context() only
allowed releasing contexts in state CLOSED, so attempting to release an
OPENED context would fail.

In particular, this bug causes available contexts to run out after some EEH
failures, where drivers attempt to release contexts that have failed to
start.

Allow releasing contexts in any state with a value lower than STARTED, i.e.
OPENED or CLOSED (we can't release a STARTED context as it's currently
using the hardware, and we assume that contexts in any new states which may
be added in future with a value higher than STARTED are also unsafe to
release).

Cc: stable@vger.kernel.org
Fixes: 6f7f0b3df6d4 ("cxl: Add AFU virtual PHB and kernel API")
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/api.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/misc/cxl/api.c b/drivers/misc/cxl/api.c
index 6a768a9ad22f..f49e3e5db58d 100644
--- a/drivers/misc/cxl/api.c
+++ b/drivers/misc/cxl/api.c
@@ -59,7 +59,7 @@ EXPORT_SYMBOL_GPL(cxl_get_phys_dev);
 
 int cxl_release_context(struct cxl_context *ctx)
 {
-	if (ctx->status != CLOSED)
+	if (ctx->status >= STARTED)
 		return -EBUSY;
 
 	put_device(&ctx->afu->dev);

From 74703cc4e08372b8aedfd687bef8182797215d30 Mon Sep 17 00:00:00 2001
From: Wei Yang <weiyang@linux.vnet.ibm.com>
Date: Mon, 20 Jul 2015 18:14:58 +0800
Subject: [PATCH 122/140] powerpc/powernv: Fix the log message when disabling
 VF

On powernv platform, IOV BAR would be shifted if necessary. While the log
message is not correct when disabling VFs.

This patch fixes this by print correct message based on the offset value.

Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/platforms/powernv/pci-ioda.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 528cd1e0b5ae..9ab30698890f 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -915,8 +915,9 @@ static int pnv_pci_vf_resource_shift(struct pci_dev *dev, int offset)
 		res2 = *res;
 		res->start += size * offset;
 
-		dev_info(&dev->dev, "VF BAR%d: %pR shifted to %pR (enabling %d VFs shifted by %d)\n",
-			 i, &res2, res, num_vfs, offset);
+		dev_info(&dev->dev, "VF BAR%d: %pR shifted to %pR (%sabling %d VFs shifted by %d)\n",
+			 i, &res2, res, (offset > 0) ? "En" : "Dis",
+			 num_vfs, offset);
 		pci_update_resource(dev, i + PCI_IOV_RESOURCES);
 	}
 	return 0;

From 8a8d91817aec6b9ca7a289891f9e6f721100ec09 Mon Sep 17 00:00:00 2001
From: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Date: Wed, 19 Aug 2015 22:19:52 +0530
Subject: [PATCH 123/140] powerpc/powernv: Add OPAL interfaces for accessing
 and modifying system LED states

This patch registers the following two new OPAL interfaces calls
for the platform LED subsystem. With the help of these new OPAL calls,
the kernel will be able to get or set the state of various individual
LEDs on the system at any given location code which is passed through
the LED specific device tree nodes.

	(1) OPAL_LEDS_GET_INDICATOR     opal_leds_get_ind
	(2) OPAL_LEDS_SET_INDICATOR     opal_leds_set_ind

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/opal-api.h            | 2 ++
 arch/powerpc/include/asm/opal.h                | 4 ++++
 arch/powerpc/platforms/powernv/opal-wrappers.S | 2 ++
 3 files changed, 8 insertions(+)

diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index 47d549ab2c18..b516ec1d3b4c 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -154,6 +154,8 @@
 #define OPAL_FLASH_WRITE			111
 #define OPAL_FLASH_ERASE			112
 #define OPAL_PRD_MSG				113
+#define OPAL_LEDS_GET_INDICATOR			114
+#define OPAL_LEDS_SET_INDICATOR			115
 #define OPAL_CEC_REBOOT2			116
 #define OPAL_LAST				116
 
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 48762b577988..800115910e43 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -197,6 +197,10 @@ int64_t opal_ipmi_recv(uint64_t interface, struct opal_ipmi_msg *msg,
 int64_t opal_i2c_request(uint64_t async_token, uint32_t bus_id,
 			 struct opal_i2c_request *oreq);
 int64_t opal_prd_msg(struct opal_prd_msg *msg);
+int64_t opal_leds_get_ind(char *loc_code, __be64 *led_mask,
+			  __be64 *led_value, __be64 *max_led_type);
+int64_t opal_leds_set_ind(uint64_t token, char *loc_code, const u64 led_mask,
+			  const u64 led_value, __be64 *max_led_type);
 
 int64_t opal_flash_read(uint64_t id, uint64_t offset, uint64_t buf,
 		uint64_t size, uint64_t token);
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index 6224176dab59..b7a464fef7a7 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -299,3 +299,5 @@ OPAL_CALL(opal_flash_read,			OPAL_FLASH_READ);
 OPAL_CALL(opal_flash_write,			OPAL_FLASH_WRITE);
 OPAL_CALL(opal_flash_erase,			OPAL_FLASH_ERASE);
 OPAL_CALL(opal_prd_msg,				OPAL_PRD_MSG);
+OPAL_CALL(opal_leds_get_ind,			OPAL_LEDS_GET_INDICATOR);
+OPAL_CALL(opal_leds_set_ind,			OPAL_LEDS_SET_INDICATOR);

From c159b5968ec9d3cbf16802189b29eb0ec17ae4d8 Mon Sep 17 00:00:00 2001
From: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Date: Wed, 19 Aug 2015 22:19:53 +0530
Subject: [PATCH 124/140] powerpc/powernv: Create LED platform device

This patch adds platform devices for leds. Also export LED related
OPAL API's so that led driver can use these APIs.

Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/platforms/powernv/opal.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index a2b53f292427..230f3a7cdea4 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -683,7 +683,7 @@ static void opal_init_heartbeat(void)
 
 static int __init opal_init(void)
 {
-	struct device_node *np, *consoles;
+	struct device_node *np, *consoles, *leds;
 	int rc;
 
 	opal_node = of_find_node_by_path("/ibm,opal");
@@ -724,6 +724,13 @@ static int __init opal_init(void)
 	/* Setup a heatbeat thread if requested by OPAL */
 	opal_init_heartbeat();
 
+	/* Create leds platform devices */
+	leds = of_find_node_by_path("/ibm,opal/leds");
+	if (leds) {
+		of_platform_device_create(leds, "opal_leds", NULL);
+		of_node_put(leds);
+	}
+
 	/* Create "opal" kobject under /sys/firmware */
 	rc = opal_sysfs_init();
 	if (rc == 0) {
@@ -876,3 +883,6 @@ EXPORT_SYMBOL_GPL(opal_rtc_write);
 EXPORT_SYMBOL_GPL(opal_tpo_read);
 EXPORT_SYMBOL_GPL(opal_tpo_write);
 EXPORT_SYMBOL_GPL(opal_i2c_request);
+/* Export these symbols for PowerNV LED class driver */
+EXPORT_SYMBOL_GPL(opal_leds_get_ind);
+EXPORT_SYMBOL_GPL(opal_leds_set_ind);

From 84ad6e5cd3e8b365c893f31787864cae5500610b Mon Sep 17 00:00:00 2001
From: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Date: Wed, 19 Aug 2015 22:19:54 +0530
Subject: [PATCH 125/140] leds/powernv: Add driver for PowerNV platform

This patch implements LED driver for PowerNV platform using the existing
generic LED class framework.

PowerNV platform has below type of LEDs:
  - System attention
      Indicates there is a problem with the system that needs attention.
  - Identify
      Helps the user locate/identify a particular FRU or resource in the
      system.
  - Fault
      Indicates there is a problem with the FRU or resource at the
      location with which the indicator is associated.

We register classdev structures for all individual LEDs detected on the
system through LED specific device tree nodes. Device tree nodes specify
what all kind of LEDs present on the same location code. It registers
LED classdev structure for each of them.

All the system LEDs can be found in the same regular path /sys/class/leds/.
We don't use LED colors. We use LED node and led-types property to form
LED classdev. Our LEDs have names in this format.

        <location_code>:<attention|identify|fault>

Any positive brightness value would turn on the LED and a zero value would
turn off the LED. The driver will return LED_FULL (255) for any turned on
LED and LED_OFF (0) for any turned off LED.

The platform level implementation of LED get and set state has been
achieved through OPAL calls. These calls are made available for the
driver by exporting from architecture specific codes.

Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 .../devicetree/bindings/leds/leds-powernv.txt |  26 ++
 drivers/leds/Kconfig                          |  11 +
 drivers/leds/Makefile                         |   1 +
 drivers/leds/leds-powernv.c                   | 345 ++++++++++++++++++
 4 files changed, 383 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-powernv.txt
 create mode 100644 drivers/leds/leds-powernv.c

diff --git a/Documentation/devicetree/bindings/leds/leds-powernv.txt b/Documentation/devicetree/bindings/leds/leds-powernv.txt
new file mode 100644
index 000000000000..66655690f749
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-powernv.txt
@@ -0,0 +1,26 @@
+Device Tree binding for LEDs on IBM Power Systems
+-------------------------------------------------
+
+Required properties:
+- compatible : Should be "ibm,opal-v3-led".
+- led-mode   : Should be "lightpath" or "guidinglight".
+
+Each location code of FRU/Enclosure must be expressed in the
+form of a sub-node.
+
+Required properties for the sub nodes:
+- led-types : Supported LED types (attention/identify/fault) provided
+              in the form of string array.
+
+Example:
+
+leds {
+	compatible = "ibm,opal-v3-led";
+	led-mode = "lightpath";
+
+	U78C9.001.RST0027-P1-C1 {
+		led-types = "identify", "fault";
+	};
+	...
+	...
+};
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 9ad35f72ab4c..f218cc3acc10 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -560,6 +560,17 @@ config LEDS_BLINKM
 	  This option enables support for the BlinkM RGB LED connected
 	  through I2C. Say Y to enable support for the BlinkM LED.
 
+config LEDS_POWERNV
+	tristate "LED support for PowerNV Platform"
+	depends on LEDS_CLASS
+	depends on PPC_POWERNV
+	depends on OF
+	help
+	  This option enables support for the system LEDs present on
+	  PowerNV platforms. Say 'y' to enable this support in kernel.
+	  To compile this driver as a module, choose 'm' here: the module
+	  will be called leds-powernv.
+
 config LEDS_SYSCON
 	bool "LED support for LEDs on system controllers"
 	depends on LEDS_CLASS=y
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 8d6a24a2f513..6a943d16ecab 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -65,6 +65,7 @@ obj-$(CONFIG_LEDS_VERSATILE)		+= leds-versatile.o
 obj-$(CONFIG_LEDS_MENF21BMC)		+= leds-menf21bmc.o
 obj-$(CONFIG_LEDS_PM8941_WLED)		+= leds-pm8941-wled.o
 obj-$(CONFIG_LEDS_KTD2692)		+= leds-ktd2692.o
+obj-$(CONFIG_LEDS_POWERNV)		+= leds-powernv.o
 
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
diff --git a/drivers/leds/leds-powernv.c b/drivers/leds/leds-powernv.c
new file mode 100644
index 000000000000..a2fea192573b
--- /dev/null
+++ b/drivers/leds/leds-powernv.c
@@ -0,0 +1,345 @@
+/*
+ * PowerNV LED Driver
+ *
+ * Copyright IBM Corp. 2015
+ *
+ * Author: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
+ * Author: Anshuman Khandual <khandual@linux.vnet.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include <asm/opal.h>
+
+/* Map LED type to description. */
+struct led_type_map {
+	const int	type;
+	const char	*desc;
+};
+static const struct led_type_map led_type_map[] = {
+	{OPAL_SLOT_LED_TYPE_ID,		POWERNV_LED_TYPE_IDENTIFY},
+	{OPAL_SLOT_LED_TYPE_FAULT,	POWERNV_LED_TYPE_FAULT},
+	{OPAL_SLOT_LED_TYPE_ATTN,	POWERNV_LED_TYPE_ATTENTION},
+	{-1,				NULL},
+};
+
+struct powernv_led_common {
+	/*
+	 * By default unload path resets all the LEDs. But on PowerNV
+	 * platform we want to retain LED state across reboot as these
+	 * are controlled by firmware. Also service processor can modify
+	 * the LEDs independent of OS. Hence avoid resetting LEDs in
+	 * unload path.
+	 */
+	bool		led_disabled;
+
+	/* Max supported LED type */
+	__be64		max_led_type;
+
+	/* glabal lock */
+	struct mutex	lock;
+};
+
+/* PowerNV LED data */
+struct powernv_led_data {
+	struct led_classdev	cdev;
+	char			*loc_code;	/* LED location code */
+	int			led_type;	/* OPAL_SLOT_LED_TYPE_* */
+
+	struct powernv_led_common *common;
+};
+
+
+/* Returns OPAL_SLOT_LED_TYPE_* for given led type string */
+static int powernv_get_led_type(const char *led_type_desc)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(led_type_map); i++)
+		if (!strcmp(led_type_map[i].desc, led_type_desc))
+			return led_type_map[i].type;
+
+	return -1;
+}
+
+/*
+ * This commits the state change of the requested LED through an OPAL call.
+ * This function is called from work queue task context when ever it gets
+ * scheduled. This function can sleep at opal_async_wait_response call.
+ */
+static void powernv_led_set(struct powernv_led_data *powernv_led,
+			    enum led_brightness value)
+{
+	int rc, token;
+	u64 led_mask, led_value = 0;
+	__be64 max_type;
+	struct opal_msg msg;
+	struct device *dev = powernv_led->cdev.dev;
+	struct powernv_led_common *powernv_led_common = powernv_led->common;
+
+	/* Prepare for the OPAL call */
+	max_type = powernv_led_common->max_led_type;
+	led_mask = OPAL_SLOT_LED_STATE_ON << powernv_led->led_type;
+	if (value)
+		led_value = led_mask;
+
+	/* OPAL async call */
+	token = opal_async_get_token_interruptible();
+	if (token < 0) {
+		if (token != -ERESTARTSYS)
+			dev_err(dev, "%s: Couldn't get OPAL async token\n",
+				__func__);
+		return;
+	}
+
+	rc = opal_leds_set_ind(token, powernv_led->loc_code,
+			       led_mask, led_value, &max_type);
+	if (rc != OPAL_ASYNC_COMPLETION) {
+		dev_err(dev, "%s: OPAL set LED call failed for %s [rc=%d]\n",
+			__func__, powernv_led->loc_code, rc);
+		goto out_token;
+	}
+
+	rc = opal_async_wait_response(token, &msg);
+	if (rc) {
+		dev_err(dev,
+			"%s: Failed to wait for the async response [rc=%d]\n",
+			__func__, rc);
+		goto out_token;
+	}
+
+	rc = be64_to_cpu(msg.params[1]);
+	if (rc != OPAL_SUCCESS)
+		dev_err(dev, "%s : OAPL async call returned failed [rc=%d]\n",
+			__func__, rc);
+
+out_token:
+	opal_async_release_token(token);
+}
+
+/*
+ * This function fetches the LED state for a given LED type for
+ * mentioned LED classdev structure.
+ */
+static enum led_brightness powernv_led_get(struct powernv_led_data *powernv_led)
+{
+	int rc;
+	__be64 mask, value, max_type;
+	u64 led_mask, led_value;
+	struct device *dev = powernv_led->cdev.dev;
+	struct powernv_led_common *powernv_led_common = powernv_led->common;
+
+	/* Fetch all LED status */
+	mask = cpu_to_be64(0);
+	value = cpu_to_be64(0);
+	max_type = powernv_led_common->max_led_type;
+
+	rc = opal_leds_get_ind(powernv_led->loc_code,
+			       &mask, &value, &max_type);
+	if (rc != OPAL_SUCCESS && rc != OPAL_PARTIAL) {
+		dev_err(dev, "%s: OPAL get led call failed [rc=%d]\n",
+			__func__, rc);
+		return LED_OFF;
+	}
+
+	led_mask = be64_to_cpu(mask);
+	led_value = be64_to_cpu(value);
+
+	/* LED status available */
+	if (!((led_mask >> powernv_led->led_type) & OPAL_SLOT_LED_STATE_ON)) {
+		dev_err(dev, "%s: LED status not available for %s\n",
+			__func__, powernv_led->cdev.name);
+		return LED_OFF;
+	}
+
+	/* LED status value */
+	if ((led_value >> powernv_led->led_type) & OPAL_SLOT_LED_STATE_ON)
+		return LED_FULL;
+
+	return LED_OFF;
+}
+
+/*
+ * LED classdev 'brightness_get' function. This schedules work
+ * to update LED state.
+ */
+static void powernv_brightness_set(struct led_classdev *led_cdev,
+				   enum led_brightness value)
+{
+	struct powernv_led_data *powernv_led =
+		container_of(led_cdev, struct powernv_led_data, cdev);
+	struct powernv_led_common *powernv_led_common = powernv_led->common;
+
+	/* Do not modify LED in unload path */
+	if (powernv_led_common->led_disabled)
+		return;
+
+	mutex_lock(&powernv_led_common->lock);
+	powernv_led_set(powernv_led, value);
+	mutex_unlock(&powernv_led_common->lock);
+}
+
+/* LED classdev 'brightness_get' function */
+static enum led_brightness powernv_brightness_get(struct led_classdev *led_cdev)
+{
+	struct powernv_led_data *powernv_led =
+		container_of(led_cdev, struct powernv_led_data, cdev);
+
+	return powernv_led_get(powernv_led);
+}
+
+/*
+ * This function registers classdev structure for any given type of LED on
+ * a given child LED device node.
+ */
+static int powernv_led_create(struct device *dev,
+			      struct powernv_led_data *powernv_led,
+			      const char *led_type_desc)
+{
+	int rc;
+
+	/* Make sure LED type is supported */
+	powernv_led->led_type = powernv_get_led_type(led_type_desc);
+	if (powernv_led->led_type == -1) {
+		dev_warn(dev, "%s: No support for led type : %s\n",
+			 __func__, led_type_desc);
+		return -EINVAL;
+	}
+
+	/* Create the name for classdev */
+	powernv_led->cdev.name = devm_kasprintf(dev, GFP_KERNEL, "%s:%s",
+						powernv_led->loc_code,
+						led_type_desc);
+	if (!powernv_led->cdev.name) {
+		dev_err(dev,
+			"%s: Memory allocation failed for classdev name\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	powernv_led->cdev.brightness_set = powernv_brightness_set;
+	powernv_led->cdev.brightness_get = powernv_brightness_get;
+	powernv_led->cdev.brightness = LED_OFF;
+	powernv_led->cdev.max_brightness = LED_FULL;
+
+	/* Register the classdev */
+	rc = devm_led_classdev_register(dev, &powernv_led->cdev);
+	if (rc) {
+		dev_err(dev, "%s: Classdev registration failed for %s\n",
+			__func__, powernv_led->cdev.name);
+	}
+
+	return rc;
+}
+
+/* Go through LED device tree node and register LED classdev structure */
+static int powernv_led_classdev(struct platform_device *pdev,
+				struct device_node *led_node,
+				struct powernv_led_common *powernv_led_common)
+{
+	const char *cur = NULL;
+	int rc = -1;
+	struct property *p;
+	struct device_node *np;
+	struct powernv_led_data *powernv_led;
+	struct device *dev = &pdev->dev;
+
+	for_each_child_of_node(led_node, np) {
+		p = of_find_property(np, "led-types", NULL);
+		if (!p)
+			continue;
+
+		while ((cur = of_prop_next_string(p, cur)) != NULL) {
+			powernv_led = devm_kzalloc(dev, sizeof(*powernv_led),
+						   GFP_KERNEL);
+			if (!powernv_led)
+				return -ENOMEM;
+
+			powernv_led->common = powernv_led_common;
+			powernv_led->loc_code = (char *)np->name;
+
+			rc = powernv_led_create(dev, powernv_led, cur);
+			if (rc)
+				return rc;
+		} /* while end */
+	}
+
+	return rc;
+}
+
+/* Platform driver probe */
+static int powernv_led_probe(struct platform_device *pdev)
+{
+	struct device_node *led_node;
+	struct powernv_led_common *powernv_led_common;
+	struct device *dev = &pdev->dev;
+
+	led_node = of_find_node_by_path("/ibm,opal/leds");
+	if (!led_node) {
+		dev_err(dev, "%s: LED parent device node not found\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	powernv_led_common = devm_kzalloc(dev, sizeof(*powernv_led_common),
+					  GFP_KERNEL);
+	if (!powernv_led_common)
+		return -ENOMEM;
+
+	mutex_init(&powernv_led_common->lock);
+	powernv_led_common->max_led_type = cpu_to_be64(OPAL_SLOT_LED_TYPE_MAX);
+
+	platform_set_drvdata(pdev, powernv_led_common);
+
+	return powernv_led_classdev(pdev, led_node, powernv_led_common);
+}
+
+/* Platform driver remove */
+static int powernv_led_remove(struct platform_device *pdev)
+{
+	struct powernv_led_common *powernv_led_common;
+
+	/* Disable LED operation */
+	powernv_led_common = platform_get_drvdata(pdev);
+	powernv_led_common->led_disabled = true;
+
+	/* Destroy lock */
+	mutex_destroy(&powernv_led_common->lock);
+
+	dev_info(&pdev->dev, "PowerNV led module unregistered\n");
+	return 0;
+}
+
+/* Platform driver property match */
+static const struct of_device_id powernv_led_match[] = {
+	{
+		.compatible	= "ibm,opal-v3-led",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, powernv_led_match);
+
+static struct platform_driver powernv_led_driver = {
+	.probe	= powernv_led_probe,
+	.remove = powernv_led_remove,
+	.driver = {
+		.name = "powernv-led-driver",
+		.of_match_table = powernv_led_match,
+	},
+};
+
+module_platform_driver(powernv_led_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("PowerNV LED driver");
+MODULE_AUTHOR("Vasant Hegde <hegdevasant@linux.vnet.ibm.com>");

From 480798044eb268a31f6b84bc3b7f99b9989e463d Mon Sep 17 00:00:00 2001
From: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Date: Fri, 31 Jul 2015 11:29:50 +0200
Subject: [PATCH 126/140] powerpc/hvsi: Fix endianness issues in the HVSI
 driver

This patch fixes several endianness issues detected when running the HVSI
driver in little endian mode.

These issues are raised in little endian mode because the data exchanged in
memory between the kernel and the hypervisor has to be in big endian
format. This exhibits as errors such as:

  irq: (null) didn't like hwirq-0x1000a00 to VIRQ16 mapping (rc=-22)
  hvsi_console_init: couldn't create irq mapping for 0x1000a00

The data structures already have endian annotations, and sparse is
generating numerous warnings based on those. This commit fixes all of
them.

Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Jiri Slaby <jslaby@suse.cz>
CC: linuxppc-dev@lists.ozlabs.org
CC: linux-kernel@vger.kernel.org
[mpe: Flesh out change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/tty/hvc/hvsi.c | 46 ++++++++++++++++++++++--------------------
 1 file changed, 24 insertions(+), 22 deletions(-)

diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c
index 41901997c0d6..a75146f600cb 100644
--- a/drivers/tty/hvc/hvsi.c
+++ b/drivers/tty/hvc/hvsi.c
@@ -240,9 +240,9 @@ static void hvsi_recv_control(struct hvsi_struct *hp, uint8_t *packet,
 {
 	struct hvsi_control *header = (struct hvsi_control *)packet;
 
-	switch (header->verb) {
+	switch (be16_to_cpu(header->verb)) {
 		case VSV_MODEM_CTL_UPDATE:
-			if ((header->word & HVSI_TSCD) == 0) {
+			if ((be32_to_cpu(header->word) & HVSI_TSCD) == 0) {
 				/* CD went away; no more connection */
 				pr_debug("hvsi%i: CD dropped\n", hp->index);
 				hp->mctrl &= TIOCM_CD;
@@ -267,6 +267,7 @@ static void hvsi_recv_control(struct hvsi_struct *hp, uint8_t *packet,
 static void hvsi_recv_response(struct hvsi_struct *hp, uint8_t *packet)
 {
 	struct hvsi_query_response *resp = (struct hvsi_query_response *)packet;
+	uint32_t mctrl_word;
 
 	switch (hp->state) {
 		case HVSI_WAIT_FOR_VER_RESPONSE:
@@ -274,9 +275,10 @@ static void hvsi_recv_response(struct hvsi_struct *hp, uint8_t *packet)
 			break;
 		case HVSI_WAIT_FOR_MCTRL_RESPONSE:
 			hp->mctrl = 0;
-			if (resp->u.mctrl_word & HVSI_TSDTR)
+			mctrl_word = be32_to_cpu(resp->u.mctrl_word);
+			if (mctrl_word & HVSI_TSDTR)
 				hp->mctrl |= TIOCM_DTR;
-			if (resp->u.mctrl_word & HVSI_TSCD)
+			if (mctrl_word & HVSI_TSCD)
 				hp->mctrl |= TIOCM_CD;
 			__set_state(hp, HVSI_OPEN);
 			break;
@@ -295,10 +297,10 @@ static int hvsi_version_respond(struct hvsi_struct *hp, uint16_t query_seqno)
 
 	packet.hdr.type = VS_QUERY_RESPONSE_PACKET_HEADER;
 	packet.hdr.len = sizeof(struct hvsi_query_response);
-	packet.hdr.seqno = atomic_inc_return(&hp->seqno);
-	packet.verb = VSV_SEND_VERSION_NUMBER;
+	packet.hdr.seqno = cpu_to_be16(atomic_inc_return(&hp->seqno));
+	packet.verb = cpu_to_be16(VSV_SEND_VERSION_NUMBER);
 	packet.u.version = HVSI_VERSION;
-	packet.query_seqno = query_seqno+1;
+	packet.query_seqno = cpu_to_be16(query_seqno+1);
 
 	pr_debug("%s: sending %i bytes\n", __func__, packet.hdr.len);
 	dbg_dump_hex((uint8_t*)&packet, packet.hdr.len);
@@ -319,7 +321,7 @@ static void hvsi_recv_query(struct hvsi_struct *hp, uint8_t *packet)
 
 	switch (hp->state) {
 		case HVSI_WAIT_FOR_VER_QUERY:
-			hvsi_version_respond(hp, query->hdr.seqno);
+			hvsi_version_respond(hp, be16_to_cpu(query->hdr.seqno));
 			__set_state(hp, HVSI_OPEN);
 			break;
 		default:
@@ -555,8 +557,8 @@ static int hvsi_query(struct hvsi_struct *hp, uint16_t verb)
 
 	packet.hdr.type = VS_QUERY_PACKET_HEADER;
 	packet.hdr.len = sizeof(struct hvsi_query);
-	packet.hdr.seqno = atomic_inc_return(&hp->seqno);
-	packet.verb = verb;
+	packet.hdr.seqno = cpu_to_be16(atomic_inc_return(&hp->seqno));
+	packet.verb = cpu_to_be16(verb);
 
 	pr_debug("%s: sending %i bytes\n", __func__, packet.hdr.len);
 	dbg_dump_hex((uint8_t*)&packet, packet.hdr.len);
@@ -596,14 +598,14 @@ static int hvsi_set_mctrl(struct hvsi_struct *hp, uint16_t mctrl)
 	struct hvsi_control packet __ALIGNED__;
 	int wrote;
 
-	packet.hdr.type = VS_CONTROL_PACKET_HEADER,
-	packet.hdr.seqno = atomic_inc_return(&hp->seqno);
+	packet.hdr.type = VS_CONTROL_PACKET_HEADER;
+	packet.hdr.seqno = cpu_to_be16(atomic_inc_return(&hp->seqno));
 	packet.hdr.len = sizeof(struct hvsi_control);
-	packet.verb = VSV_SET_MODEM_CTL;
-	packet.mask = HVSI_TSDTR;
+	packet.verb = cpu_to_be16(VSV_SET_MODEM_CTL);
+	packet.mask = cpu_to_be32(HVSI_TSDTR);
 
 	if (mctrl & TIOCM_DTR)
-		packet.word = HVSI_TSDTR;
+		packet.word = cpu_to_be32(HVSI_TSDTR);
 
 	pr_debug("%s: sending %i bytes\n", __func__, packet.hdr.len);
 	dbg_dump_hex((uint8_t*)&packet, packet.hdr.len);
@@ -680,7 +682,7 @@ static int hvsi_put_chars(struct hvsi_struct *hp, const char *buf, int count)
 	BUG_ON(count > HVSI_MAX_OUTGOING_DATA);
 
 	packet.hdr.type = VS_DATA_PACKET_HEADER;
-	packet.hdr.seqno = atomic_inc_return(&hp->seqno);
+	packet.hdr.seqno = cpu_to_be16(atomic_inc_return(&hp->seqno));
 	packet.hdr.len = count + sizeof(struct hvsi_header);
 	memcpy(&packet.data, buf, count);
 
@@ -697,9 +699,9 @@ static void hvsi_close_protocol(struct hvsi_struct *hp)
 	struct hvsi_control packet __ALIGNED__;
 
 	packet.hdr.type = VS_CONTROL_PACKET_HEADER;
-	packet.hdr.seqno = atomic_inc_return(&hp->seqno);
+	packet.hdr.seqno = cpu_to_be16(atomic_inc_return(&hp->seqno));
 	packet.hdr.len = 6;
-	packet.verb = VSV_CLOSE_PROTOCOL;
+	packet.verb = cpu_to_be16(VSV_CLOSE_PROTOCOL);
 
 	pr_debug("%s: sending %i bytes\n", __func__, packet.hdr.len);
 	dbg_dump_hex((uint8_t*)&packet, packet.hdr.len);
@@ -1180,7 +1182,7 @@ static int __init hvsi_console_init(void)
 	/* search device tree for vty nodes */
 	for_each_compatible_node(vty, "serial", "hvterm-protocol") {
 		struct hvsi_struct *hp;
-		const uint32_t *vtermno, *irq;
+		const __be32 *vtermno, *irq;
 
 		vtermno = of_get_property(vty, "reg", NULL);
 		irq = of_get_property(vty, "interrupts", NULL);
@@ -1202,11 +1204,11 @@ static int __init hvsi_console_init(void)
 		hp->index = hvsi_count;
 		hp->inbuf_end = hp->inbuf;
 		hp->state = HVSI_CLOSED;
-		hp->vtermno = *vtermno;
-		hp->virq = irq_create_mapping(NULL, irq[0]);
+		hp->vtermno = be32_to_cpup(vtermno);
+		hp->virq = irq_create_mapping(NULL, be32_to_cpup(irq));
 		if (hp->virq == 0) {
 			printk(KERN_ERR "%s: couldn't create irq mapping for 0x%x\n",
-				__func__, irq[0]);
+			       __func__, be32_to_cpup(irq));
 			tty_port_destroy(&hp->port);
 			continue;
 		}

From ffebf5f391dfa9da3e086abad3eef7d3e5300249 Mon Sep 17 00:00:00 2001
From: Samuel Mendoza-Jonas <sam.mj@au1.ibm.com>
Date: Wed, 22 Jul 2015 15:50:50 +1000
Subject: [PATCH 127/140] powerpc/kexec: Reset secondary cpu endianness before
 kexec

If the target kernel does not inlcude the FIXUP_ENDIAN check, coming
from a different-endian kernel will cause the target kernel to panic.
All ppc64 kernels can handle starting in big-endian mode, so return to
big-endian before branching into the target kernel.

This mainly affects pseries as secondaries on powernv are returned to
OPAL.

Signed-off-by: Samuel Mendoza-Jonas <sam.mj@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/misc_64.S | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index 4e314b90c75d..6e4168cf4698 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -475,9 +475,18 @@ _GLOBAL(kexec_wait)
 #ifdef CONFIG_KEXEC		/* use no memory without kexec */
 	lwz	r4,0(r5)
 	cmpwi	0,r4,0
-	bnea	0x60
+	beq	99b
+#ifdef CONFIG_PPC_BOOK3S_64
+	li	r10,0x60
+	mfmsr	r11
+	clrrdi	r11,r11,1	/* Clear MSR_LE */
+	mtsrr0	r10
+	mtsrr1	r11
+	rfid
+#else
+	ba	0x60
+#endif
 #endif
-	b	99b
 
 /* this can be in text because we won't change it until we are
  * running in real anyways

From e72bb8a5a884d022231149d407653923a1d79e53 Mon Sep 17 00:00:00 2001
From: Samuel Mendoza-Jonas <sam.mj@au1.ibm.com>
Date: Wed, 22 Jul 2015 15:50:51 +1000
Subject: [PATCH 128/140] powerpc/powernv: Reset HILE before kexec_sequence()

On powernv secondary cpus are returned to OPAL, and will then enter
the target kernel in big-endian. However if it is set the HILE bit
will persist, causing the first exception in the target kernel to be
delivered in litte-endian regardless of the current endianness.

If running on top of OPAL make sure the HILE bit is reset once we've
finished waiting for all of the secondaries to be returned to OPAL.

Signed-off-by: Samuel Mendoza-Jonas <sam.mj@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/platforms/powernv/setup.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
index 77a31c1474a5..685b3cbe1362 100644
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -235,6 +235,13 @@ static void pnv_kexec_cpu_down(int crash_shutdown, int secondary)
 	} else {
 		/* Primary waits for the secondaries to have reached OPAL */
 		pnv_kexec_wait_secondaries_down();
+
+		/*
+		 * We might be running as little-endian - now that interrupts
+		 * are disabled, reset the HILE bit to big-endian so we don't
+		 * take interrupts in the wrong endian later
+		 */
+		opal_reinit_cpus(OPAL_REINIT_CPUS_HILE_BE);
 	}
 }
 #endif /* CONFIG_KEXEC */

From 5d53be7d8c7ccf8eec1ce66c6b3573c01d16b755 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <mpe@ellerman.id.au>
Date: Sat, 22 Aug 2015 09:33:55 +1000
Subject: [PATCH 129/140] powerpc/powernv: Fix mis-merge of OPAL support for
 LEDS driver

When I merged the OPAL support for the powernv LEDS driver I missed a
hunk.

This is slightly modified from the original patch, as the original added
code to opal-api.h which is not in the skiboot version, which is
discouraged.

Instead those values are moved into the driver, which is the only place
they are used.

Fixes: 8a8d91817aec ("powerpc/powernv: Add OPAL interfaces for accessing and modifying system LED states")
Reviewed-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/opal-api.h | 12 ++++++++++++
 drivers/leds/leds-powernv.c         |  6 +++---
 2 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index b516ec1d3b4c..9784c9241c70 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -343,6 +343,18 @@ enum OpalPciResetState {
 	OPAL_ASSERT_RESET   = 1
 };
 
+enum OpalSlotLedType {
+	OPAL_SLOT_LED_TYPE_ID = 0,	/* IDENTIFY LED */
+	OPAL_SLOT_LED_TYPE_FAULT = 1,	/* FAULT LED */
+	OPAL_SLOT_LED_TYPE_ATTN = 2,	/* System Attention LED */
+	OPAL_SLOT_LED_TYPE_MAX = 3
+};
+
+enum OpalSlotLedState {
+	OPAL_SLOT_LED_STATE_OFF = 0,	/* LED is OFF */
+	OPAL_SLOT_LED_STATE_ON = 1	/* LED is ON */
+};
+
 /*
  * Address cycle types for LPC accesses. These also correspond
  * to the content of the first cell of the "reg" property for
diff --git a/drivers/leds/leds-powernv.c b/drivers/leds/leds-powernv.c
index a2fea192573b..2c5c5b12ab64 100644
--- a/drivers/leds/leds-powernv.c
+++ b/drivers/leds/leds-powernv.c
@@ -27,9 +27,9 @@ struct led_type_map {
 	const char	*desc;
 };
 static const struct led_type_map led_type_map[] = {
-	{OPAL_SLOT_LED_TYPE_ID,		POWERNV_LED_TYPE_IDENTIFY},
-	{OPAL_SLOT_LED_TYPE_FAULT,	POWERNV_LED_TYPE_FAULT},
-	{OPAL_SLOT_LED_TYPE_ATTN,	POWERNV_LED_TYPE_ATTENTION},
+	{OPAL_SLOT_LED_TYPE_ID,		"identify"},
+	{OPAL_SLOT_LED_TYPE_FAULT,	"fault"},
+	{OPAL_SLOT_LED_TYPE_ATTN,	"attention"},
 	{-1,				NULL},
 };
 

From f47f966fbe0aaff4ebbdb83d95acdfa5d3c20477 Mon Sep 17 00:00:00 2001
From: Vaishali Thakkar <vthakkar1994@gmail.com>
Date: Sun, 19 Jul 2015 22:53:52 +0530
Subject: [PATCH 130/140] cxl: Remove use of macro DEFINE_PCI_DEVICE_TABLE

Macro DEFINE_PCI_DEVICE_TABLE is deprecated. So, here use
struct pci_device_id instead of DEFINE_PCI_DEVICE_TABLE with
the goal of getting rid of this macro completely.

The Coccinelle semantic patch that performs this transformation
is as follows:

@@
identifier a;
declarer name DEFINE_PCI_DEVICE_TABLE;
initializer i;
@@
- DEFINE_PCI_DEVICE_TABLE(a)
+ const struct pci_device_id a[]
= i;

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index 03ddb2d8f974..273374c507f7 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -134,7 +134,7 @@ u8 cxl_afu_cr_read8(struct cxl_afu *afu, int cr, u64 off)
 	return (val >> ((off & 0x3) * 8)) & 0xff;
 }
 
-static DEFINE_PCI_DEVICE_TABLE(cxl_pci_tbl) = {
+static const struct pci_device_id cxl_pci_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_IBM, 0x0477), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_IBM, 0x044b), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_IBM, 0x04cf), },

From a6897f39660cc07fa78b4459d82f12b07abb50b1 Mon Sep 17 00:00:00 2001
From: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Date: Tue, 25 Aug 2015 11:04:48 +0530
Subject: [PATCH 131/140] cxl: Release irqs if memory allocation fails

This minor patch plugs a potential irq leak in case of a memory
allocation failure inside function the afu_allocate_irqs. Presently the
irqs allocated to the context gets leaked if allocation of either
one of context irq_bitmap or irq_names fails.

Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/irq.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/misc/cxl/irq.c b/drivers/misc/cxl/irq.c
index 72bf45ae3806..583b42afeda2 100644
--- a/drivers/misc/cxl/irq.c
+++ b/drivers/misc/cxl/irq.c
@@ -430,6 +430,9 @@ int afu_allocate_irqs(struct cxl_context *ctx, u32 count)
 	int rc, r, i, j = 1;
 	struct cxl_irq_name *irq_name;
 
+	/* Initialize the list head to hold irq names */
+	INIT_LIST_HEAD(&ctx->irq_names);
+
 	if ((rc = cxl_alloc_irq_ranges(&ctx->irqs, ctx->afu->adapter, count)))
 		return rc;
 
@@ -441,13 +444,12 @@ int afu_allocate_irqs(struct cxl_context *ctx, u32 count)
 	ctx->irq_bitmap = kcalloc(BITS_TO_LONGS(count),
 				  sizeof(*ctx->irq_bitmap), GFP_KERNEL);
 	if (!ctx->irq_bitmap)
-		return -ENOMEM;
+		goto out;
 
 	/*
 	 * Allocate names first.  If any fail, bail out before allocating
 	 * actual hardware IRQs.
 	 */
-	INIT_LIST_HEAD(&ctx->irq_names);
 	for (r = 1; r < CXL_IRQ_RANGES; r++) {
 		for (i = 0; i < ctx->irqs.range[r]; i++) {
 			irq_name = kmalloc(sizeof(struct cxl_irq_name),
@@ -469,6 +471,7 @@ int afu_allocate_irqs(struct cxl_context *ctx, u32 count)
 	return 0;
 
 out:
+	cxl_release_irq_ranges(&ctx->irqs, ctx->afu->adapter);
 	afu_irq_name_free(ctx);
 	return -ENOMEM;
 }

From 9d8e27673c45927fee9e7d8992ffb325a6b0b0e4 Mon Sep 17 00:00:00 2001
From: Daniel Axtens <dja@axtens.net>
Date: Fri, 21 Aug 2015 17:25:15 +1000
Subject: [PATCH 132/140] cxl: Remove racy attempt to force EEH invocation in
 reset

cxl_reset currently PERSTs the slot, and then repeatedly tries to
read MMIO space in order to kick off EEH.

There are 2 problems with this: it's unnecessary, and it's racy.

It's unnecessary because the PERST will bring down the PHB link.
That will be picked up by the CAPP, which will send out an HMI.
Skiboot, noticing an HMI from the CAPP, will send an OPAL
notification to the kernel, which will trigger EEH recovery.

It's also racy: the EEH recovery triggered by the CAPP will
eventually cause the MMIO space to have its mapping invalidated
and the pointer NULLed out. This races with our attempt to read
the MMIO space. This is causing OOPSes in testing.

Simply drop all the attempts to force EEH detection, and trust
that Skiboot will send the notification and that we'll act on it.
The Skiboot code to send the EEH notification has been in Skiboot
for as long as CAPP recovery has been supported, so we don't need
to worry about breaking obscure setups with ancient firmware.

Cc: Ryan Grimm <grimm@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Fixes: 62fa19d4b4fd ("cxl: Add ability to reset the card")
Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/pci.c | 16 ----------------
 1 file changed, 16 deletions(-)

diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index 273374c507f7..6ca7c3d0ef9b 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -876,8 +876,6 @@ int cxl_reset(struct cxl *adapter)
 {
 	struct pci_dev *dev = to_pci_dev(adapter->dev.parent);
 	int rc;
-	int i;
-	u32 val;
 
 	if (adapter->perst_same_image) {
 		dev_warn(&dev->dev,
@@ -895,20 +893,6 @@ int cxl_reset(struct cxl *adapter)
 		return rc;
 	}
 
-	/* the PERST done above fences the PHB.  So, reset depends on EEH
-	 * to unbind the driver, tell Sapphire to reinit the PHB, and rebind
-	 * the driver.  Do an mmio read explictly to ensure EEH notices the
-	 * fenced PHB.  Retry for a few seconds before giving up. */
-	i = 0;
-	while (((val = mmio_read32be(adapter->p1_mmio)) != 0xffffffff) &&
-		(i < 5)) {
-		msleep(500);
-		i++;
-	}
-
-	if (val != 0xffffffff)
-		dev_err(&dev->dev, "cxl: PERST failed to trigger EEH\n");
-
 	return rc;
 }
 

From 0e1ffef02cf94e46f95957af0f822531fecf741c Mon Sep 17 00:00:00 2001
From: Alexey Kardashevskiy <aik@ozlabs.ru>
Date: Thu, 27 Aug 2015 16:01:16 +1000
Subject: [PATCH 133/140] powerpc/iommu: Set default DMA offset in
 dma_dev_setup

Commit e91c25111aa3 "powerpc/iommu: Cleanup setting of DMA base/offset"
expects that the default DMA offset is set from pnv_ioda_setup_bus_dma()
which is correct unless it is SRIOV where the code flow is different -
at the moment when pnv_ioda_setup_bus_dma() is called, PCI devices for
VFs are not created yet.

This adds missing set_dma_offset() to pnv_pci_ioda_dma_dev_setup() to
cover the case of SRIOV.

Note that we still need set_dma_offset() in pnv_ioda_setup_bus_dma() as
at the boot time pnv_pci_ioda_dma_dev_setup() is called when no PE was
created yet, this happens at the PHB fixup stage.

Fixes: e91c25111aa3 ("powerpc/iommu: Cleanup setting of DMA base/offset")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/platforms/powernv/pci-ioda.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 9ab30698890f..4b8d3bd72a78 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1560,6 +1560,7 @@ static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *pdev
 
 	pe = &phb->ioda.pe_array[pdn->pe_number];
 	WARN_ON(get_dma_ops(&pdev->dev) != &dma_iommu_ops);
+	set_dma_offset(&pdev->dev, pe->tce_bypass_base);
 	set_iommu_table_base(&pdev->dev, pe->table_group.tables[0]);
 	/*
 	 * Note: iommu_add_device() will fail here as

From d690740f22f6520873f96e66aae7119ec2215755 Mon Sep 17 00:00:00 2001
From: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Date: Thu, 27 Aug 2015 11:34:10 +0530
Subject: [PATCH 134/140] powerpc/powernv: Enable LEDS support

Commit 84ad6e5c added LEDS support for PowerNV platform. Lets
update ppc64_defconfig to pick LEDS driver.

PowerNV LEDS driver looks for "/ibm,opal/leds" node in device
tree and loads if this node exists. Hence added it as 'm'.

Also note that powernv LEDS driver needs NEW_LEDS and LEDS_CLASS
as well. Hence added them to config file.

mpe: Also add them to pseries_defconfig, which is currently also used
for powernv systems.

Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/configs/ppc64_defconfig   | 3 +++
 arch/powerpc/configs/pseries_defconfig | 3 +++
 2 files changed, 6 insertions(+)

diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index a97efc2146fd..6bc0ee4b1070 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -355,3 +355,6 @@ CONFIG_CRYPTO_DEV_NX_ENCRYPT=m
 CONFIG_VIRTUALIZATION=y
 CONFIG_KVM_BOOK3S_64=m
 CONFIG_KVM_BOOK3S_64_HV=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_POWERNV=m
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 2404271ec4ae..7991f37e5fe2 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -320,3 +320,6 @@ CONFIG_CRYPTO_DEV_NX_ENCRYPT=m
 CONFIG_VIRTUALIZATION=y
 CONFIG_KVM_BOOK3S_64=m
 CONFIG_KVM_BOOK3S_64_HV=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_POWERNV=m

From 590c7567a2895f939525ead57b0334c6d47986f0 Mon Sep 17 00:00:00 2001
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
Date: Thu, 27 Aug 2015 14:12:36 +1000
Subject: [PATCH 135/140] powerpc/pseries: Fix corrupted pdn list

Commit cca87d30 ("powerpc/pci: Refactor pci_dn") introduced pdn
list for SRIOV VFs. It means the pdn is be put into the child list
of its parent pdn when the pdn is created. When doing PCI hot
unplugging on pSeries, the PCI device node as well as its pdn are
released through procfs entry "powerpc/ofdt". Some one else grabs
the memory chunk of the pdn and update it accordingly. At the same
time, the pdn is still tracked in the child list of parent pdn. It
leads to corrupted child list in the parent pdn.

This fixes above issue by removing the pdn from the child list of
its parent pdn when the device node is detached from the system.
Note the pdn is free'd when the device node is released if the
device node is dynamic one. Otherwise, the device node as well
as the pdn won't be released.

Fixes: cca87d30 ("powerpc/pci: Refactor pci_dn")
Cc: stable@vger.kernel.org # 4.1+
Reported-by: Santwana Samantray <santwana.samantray@in.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/platforms/pseries/setup.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index df6a7041922b..e6e8b241d717 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -268,6 +268,11 @@ static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long act
 			eeh_dev_init(PCI_DN(np), pci->phb);
 		}
 		break;
+	case OF_RECONFIG_DETACH_NODE:
+		pci = PCI_DN(np);
+		if (pci)
+			list_del(&pci->list);
+		break;
 	default:
 		err = NOTIFY_DONE;
 		break;

From ea0f8acf4d44727f7d3a38072566029bf5e17b44 Mon Sep 17 00:00:00 2001
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
Date: Thu, 27 Aug 2015 14:12:37 +1000
Subject: [PATCH 136/140] powerpc/pseries: Cleanup on
 pci_dn_reconfig_notifier()

This applies cleanup on pci_dn_reconfig_notifier(), no functional
changes:

   * Rename variable "pci" to "pdn" to indicate its purpose clearly.
   * The parent node can be released at any time. So it should be
     hold with of_get_parent() before accessing it.
   * The device node doesn't have to have parent node in theory.
     More check on this.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/platforms/pseries/setup.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index e6e8b241d717..39a74fad3e04 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -254,24 +254,26 @@ static void __init pseries_discover_pic(void)
 static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *data)
 {
 	struct of_reconfig_data *rd = data;
-	struct device_node *np = rd->dn;
-	struct pci_dn *pci = NULL;
+	struct device_node *parent, *np = rd->dn;
+	struct pci_dn *pdn;
 	int err = NOTIFY_OK;
 
 	switch (action) {
 	case OF_RECONFIG_ATTACH_NODE:
-		pci = np->parent->data;
-		if (pci) {
-			update_dn_pci_info(np, pci->phb);
-
-			/* Create EEH device for the OF node */
-			eeh_dev_init(PCI_DN(np), pci->phb);
+		parent = of_get_parent(np);
+		pdn = parent ? PCI_DN(parent) : NULL;
+		if (pdn) {
+			/* Create pdn and EEH device */
+			update_dn_pci_info(np, pdn->phb);
+			eeh_dev_init(PCI_DN(np), pdn->phb);
 		}
+
+		of_node_put(parent);
 		break;
 	case OF_RECONFIG_DETACH_NODE:
-		pci = PCI_DN(np);
-		if (pci)
-			list_del(&pci->list);
+		pdn = PCI_DN(np);
+		if (pdn)
+			list_del(&pdn->list);
 		break;
 	default:
 		err = NOTIFY_DONE;

From 259800135c654a098d9f0adfdd3d1f20eef1f231 Mon Sep 17 00:00:00 2001
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
Date: Fri, 28 Aug 2015 11:57:00 +1000
Subject: [PATCH 137/140] powerpc/eeh: Fix fenced PHB caused by
 eeh_slot_error_detail()

The config space of some PCI devices can't be accessed when their
PEs are in frozen state. Otherwise, fenced PHB might be seen.
Those PEs are identified with flag EEH_PE_CFG_RESTRICTED, meaing
EEH_PE_CFG_BLOCKED is set automatically when the PE is put to
frozen state (EEH_PE_ISOLATED). eeh_slot_error_detail() restores
PCI device BARs with eeh_pe_restore_bars(), which then calls
eeh_ops->restore_config() to reinitialize the PCI device in
(OPAL) firmware. eeh_ops->restore_config() produces PCI config
access that causes fenced PHB. The problem was reported on below
adapter:

   0001:01:00.0 0200: 14e4:168e (rev 10)
   0001:01:00.0 Ethernet controller: Broadcom Corporation \
                NetXtreme II BCM57810 10 Gigabit Ethernet (rev 10)

This fixes the issue by skipping eeh_pe_restore_bars() in
eeh_slot_error_detail() when EEH_PE_CFG_BLOCKED is set for the PE.

Fixes: b6541db1 ("powerpc/eeh: Block PCI config access upon frozen PE")
Cc: stable@vger.kernel.org # v4.0+
Reported-by: Manvanthara B. Puttashankar <mputtash@in.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/eeh.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 58c598400028..e968533e3e05 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -308,11 +308,26 @@ void eeh_slot_error_detail(struct eeh_pe *pe, int severity)
 	if (!(pe->type & EEH_PE_PHB)) {
 		if (eeh_has_flag(EEH_ENABLE_IO_FOR_LOG))
 			eeh_pci_enable(pe, EEH_OPT_THAW_MMIO);
-		eeh_ops->configure_bridge(pe);
-		eeh_pe_restore_bars(pe);
 
-		pci_regs_buf[0] = 0;
-		eeh_pe_traverse(pe, eeh_dump_pe_log, &loglen);
+		/*
+		 * The config space of some PCI devices can't be accessed
+		 * when their PEs are in frozen state. Otherwise, fenced
+		 * PHB might be seen. Those PEs are identified with flag
+		 * EEH_PE_CFG_RESTRICTED, indicating EEH_PE_CFG_BLOCKED
+		 * is set automatically when the PE is put to EEH_PE_ISOLATED.
+		 *
+		 * Restoring BARs possibly triggers PCI config access in
+		 * (OPAL) firmware and then causes fenced PHB. If the
+		 * PCI config is blocked with flag EEH_PE_CFG_BLOCKED, it's
+		 * pointless to restore BARs and dump config space.
+		 */
+		eeh_ops->configure_bridge(pe);
+		if (!(pe->state & EEH_PE_CFG_BLOCKED)) {
+			eeh_pe_restore_bars(pe);
+
+			pci_regs_buf[0] = 0;
+			eeh_pe_traverse(pe, eeh_dump_pe_log, &loglen);
+		}
 	}
 
 	eeh_ops->get_log(pe, severity, pci_regs_buf, loglen);

From af2a50bb0ce1ca7a9c4784813419c922bf2285df Mon Sep 17 00:00:00 2001
From: Ian Munsie <imunsie@au1.ibm.com>
Date: Thu, 27 Aug 2015 19:50:18 +1000
Subject: [PATCH 138/140] cxl: Fix + cleanup error paths in
 cxl_dev_context_init

If the cxl_context_alloc() call fails, we return immediately without
releasing the reference on the AFU device, allowing it to leak.

This patch switches to using goto style error handling so that the
device is released in common code for both error paths, and will also
simplify things if we add additional initialisation in this function in
the future.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/api.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/misc/cxl/api.c b/drivers/misc/cxl/api.c
index f49e3e5db58d..005adc7d33a2 100644
--- a/drivers/misc/cxl/api.c
+++ b/drivers/misc/cxl/api.c
@@ -25,19 +25,24 @@ struct cxl_context *cxl_dev_context_init(struct pci_dev *dev)
 
 	get_device(&afu->dev);
 	ctx = cxl_context_alloc();
-	if (IS_ERR(ctx))
-		return ctx;
+	if (IS_ERR(ctx)) {
+		rc = PTR_ERR(ctx);
+		goto err_dev;
+	}
 
 	/* Make it a slave context.  We can promote it later? */
 	rc = cxl_context_init(ctx, afu, false, NULL);
-	if (rc) {
-		kfree(ctx);
-		put_device(&afu->dev);
-		return ERR_PTR(-ENOMEM);
-	}
+	if (rc)
+		goto err_ctx;
 	cxl_assign_psn_space(ctx);
 
 	return ctx;
+
+err_ctx:
+	kfree(ctx);
+err_dev:
+	put_device(&afu->dev);
+	return ERR_PTR(rc);
 }
 EXPORT_SYMBOL_GPL(cxl_dev_context_init);
 

From 55e07668fbba9466e6a9ef7650718356cda38406 Mon Sep 17 00:00:00 2001
From: Ian Munsie <imunsie@au1.ibm.com>
Date: Thu, 27 Aug 2015 19:50:19 +1000
Subject: [PATCH 139/140] cxl: Fix force unmapping mmaps of contexts allocated
 through the kernel api

The cxl user api uses the address_space associated with the file when we
need to force unmap all cxl mmap regions (e.g. on eeh, driver detach,
etc). Currently, contexts allocated through the kernel api do not do
this and instead skip the mmap invalidation, potentially allowing them
to poke at the hardware after such an event, which may cause all sorts
of trouble.

This patch allocates an address_space for cxl contexts allocated through
the kernel api so that the same invalidate path will for these contexts
as well. We don't use the anonymous inode's address_space, as doing so
could invalidate any mmaps of completely unrelated drivers using
anonymous file descriptors.

This patch also introduces a kernelapi flag, so we know when freeing the
context if the address_space was allocated by us and needs to be freed.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/api.c     | 35 +++++++++++++++++++++++++++++++----
 drivers/misc/cxl/context.c |  2 ++
 drivers/misc/cxl/cxl.h     |  1 +
 3 files changed, 34 insertions(+), 4 deletions(-)

diff --git a/drivers/misc/cxl/api.c b/drivers/misc/cxl/api.c
index 005adc7d33a2..8af12c884b04 100644
--- a/drivers/misc/cxl/api.c
+++ b/drivers/misc/cxl/api.c
@@ -12,11 +12,13 @@
 #include <linux/anon_inodes.h>
 #include <linux/file.h>
 #include <misc/cxl.h>
+#include <linux/fs.h>
 
 #include "cxl.h"
 
 struct cxl_context *cxl_dev_context_init(struct pci_dev *dev)
 {
+	struct address_space *mapping;
 	struct cxl_afu *afu;
 	struct cxl_context  *ctx;
 	int rc;
@@ -30,14 +32,32 @@ struct cxl_context *cxl_dev_context_init(struct pci_dev *dev)
 		goto err_dev;
 	}
 
-	/* Make it a slave context.  We can promote it later? */
-	rc = cxl_context_init(ctx, afu, false, NULL);
-	if (rc)
+	ctx->kernelapi = true;
+
+	/*
+	 * Make our own address space since we won't have one from the
+	 * filesystem like the user api has, and even if we do associate a file
+	 * with this context we don't want to use the global anonymous inode's
+	 * address space as that can invalidate unrelated users:
+	 */
+	mapping = kmalloc(sizeof(struct address_space), GFP_KERNEL);
+	if (!mapping) {
+		rc = -ENOMEM;
 		goto err_ctx;
+	}
+	address_space_init_once(mapping);
+
+	/* Make it a slave context.  We can promote it later? */
+	rc = cxl_context_init(ctx, afu, false, mapping);
+	if (rc)
+		goto err_mapping;
+
 	cxl_assign_psn_space(ctx);
 
 	return ctx;
 
+err_mapping:
+	kfree(mapping);
 err_ctx:
 	kfree(ctx);
 err_dev:
@@ -260,9 +280,16 @@ struct file *cxl_get_fd(struct cxl_context *ctx, struct file_operations *fops,
 
 	file = anon_inode_getfile("cxl", fops, ctx, flags);
 	if (IS_ERR(file))
-		put_unused_fd(fdtmp);
+		goto err_fd;
+
+	file->f_mapping = ctx->mapping;
+
 	*fd = fdtmp;
 	return file;
+
+err_fd:
+	put_unused_fd(fdtmp);
+	return NULL;
 }
 EXPORT_SYMBOL_GPL(cxl_get_fd);
 
diff --git a/drivers/misc/cxl/context.c b/drivers/misc/cxl/context.c
index 941fda04aa9a..e762f85ee233 100644
--- a/drivers/misc/cxl/context.c
+++ b/drivers/misc/cxl/context.c
@@ -272,6 +272,8 @@ static void reclaim_ctx(struct rcu_head *rcu)
 	if (ctx->ff_page)
 		__free_page(ctx->ff_page);
 	ctx->sstp = NULL;
+	if (ctx->kernelapi)
+		kfree(ctx->mapping);
 
 	kfree(ctx);
 }
diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h
index e7af256f60c5..d6566c60bcb0 100644
--- a/drivers/misc/cxl/cxl.h
+++ b/drivers/misc/cxl/cxl.h
@@ -420,6 +420,7 @@ struct cxl_context {
 	struct mutex mapping_lock;
 	struct page *ff_page;
 	bool mmio_err_ff;
+	bool kernelapi;
 
 	spinlock_t sste_lock; /* Protects segment table entries */
 	struct cxl_sste *sstp;

From 390fd5929f52bdfb9dfcc03820041ba556780f4a Mon Sep 17 00:00:00 2001
From: Philippe Bergheaud <felix@linux.vnet.ibm.com>
Date: Fri, 28 Aug 2015 09:37:36 +0200
Subject: [PATCH 140/140] cxl: Set up and enable PSL Timebase

This patch configures the PSL Timebase function and enables it,
after the CAPP has been initialized by OPAL.

Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/cxl.h |  5 ++++
 drivers/misc/cxl/pci.c | 57 +++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 61 insertions(+), 1 deletion(-)

diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h
index d6566c60bcb0..1c30ef77073d 100644
--- a/drivers/misc/cxl/cxl.h
+++ b/drivers/misc/cxl/cxl.h
@@ -83,8 +83,10 @@ static const cxl_p1_reg_t CXL_PSL_AFUSEL  = {0x00B0};
 /* 0x00C0:7EFF Implementation dependent area */
 static const cxl_p1_reg_t CXL_PSL_FIR1      = {0x0100};
 static const cxl_p1_reg_t CXL_PSL_FIR2      = {0x0108};
+static const cxl_p1_reg_t CXL_PSL_Timebase  = {0x0110};
 static const cxl_p1_reg_t CXL_PSL_VERSION   = {0x0118};
 static const cxl_p1_reg_t CXL_PSL_RESLCKTO  = {0x0128};
+static const cxl_p1_reg_t CXL_PSL_TB_CTLSTAT = {0x0140};
 static const cxl_p1_reg_t CXL_PSL_FIR_CNTL  = {0x0148};
 static const cxl_p1_reg_t CXL_PSL_DSNDCTL   = {0x0150};
 static const cxl_p1_reg_t CXL_PSL_SNWRALLOC = {0x0158};
@@ -152,6 +154,9 @@ static const cxl_p2n_reg_t CXL_PSL_WED_An     = {0x0A0};
 #define CXL_PSL_SPAP_Size_Shift 4
 #define CXL_PSL_SPAP_V    0x0000000000000001ULL
 
+/****** CXL_PSL_Control ****************************************************/
+#define CXL_PSL_Control_tb 0x0000000000000001ULL
+
 /****** CXL_PSL_DLCNTL *****************************************************/
 #define CXL_PSL_DLCNTL_D (0x1ull << (63-28))
 #define CXL_PSL_DLCNTL_C (0x1ull << (63-29))
diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index 6ca7c3d0ef9b..02c85160bfe9 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -370,6 +370,55 @@ static int init_implementation_adapter_regs(struct cxl *adapter, struct pci_dev
 	return 0;
 }
 
+#define TBSYNC_CNT(n) (((u64)n & 0x7) << (63-6))
+#define _2048_250MHZ_CYCLES 1
+
+static int cxl_setup_psl_timebase(struct cxl *adapter, struct pci_dev *dev)
+{
+	u64 psl_tb;
+	int delta;
+	unsigned int retry = 0;
+	struct device_node *np;
+
+	if (!(np = pnv_pci_get_phb_node(dev)))
+		return -ENODEV;
+
+	/* Do not fail when CAPP timebase sync is not supported by OPAL */
+	of_node_get(np);
+	if (! of_get_property(np, "ibm,capp-timebase-sync", NULL)) {
+		of_node_put(np);
+		pr_err("PSL: Timebase sync: OPAL support missing\n");
+		return 0;
+	}
+	of_node_put(np);
+
+	/*
+	 * Setup PSL Timebase Control and Status register
+	 * with the recommended Timebase Sync Count value
+	 */
+	cxl_p1_write(adapter, CXL_PSL_TB_CTLSTAT,
+		     TBSYNC_CNT(2 * _2048_250MHZ_CYCLES));
+
+	/* Enable PSL Timebase */
+	cxl_p1_write(adapter, CXL_PSL_Control, 0x0000000000000000);
+	cxl_p1_write(adapter, CXL_PSL_Control, CXL_PSL_Control_tb);
+
+	/* Wait until CORE TB and PSL TB difference <= 16usecs */
+	do {
+		msleep(1);
+		if (retry++ > 5) {
+			pr_err("PSL: Timebase sync: giving up!\n");
+			return -EIO;
+		}
+		psl_tb = cxl_p1_read(adapter, CXL_PSL_Timebase);
+		delta = mftb() - psl_tb;
+		if (delta < 0)
+			delta = -delta;
+	} while (cputime_to_usecs(delta) > 16);
+
+	return 0;
+}
+
 static int init_implementation_afu_regs(struct cxl_afu *afu)
 {
 	/* read/write masks for this slice */
@@ -1053,9 +1102,12 @@ static struct cxl *cxl_alloc_adapter(void)
 	return NULL;
 }
 
+#define CXL_PSL_ErrIVTE_tberror (0x1ull << (63-31))
+
 static int sanitise_adapter_regs(struct cxl *adapter)
 {
-	cxl_p1_write(adapter, CXL_PSL_ErrIVTE, 0x0000000000000000);
+	/* Clear PSL tberror bit by writing 1 to it */
+	cxl_p1_write(adapter, CXL_PSL_ErrIVTE, CXL_PSL_ErrIVTE_tberror);
 	return cxl_tlb_slb_invalidate(adapter);
 }
 
@@ -1108,6 +1160,9 @@ static int cxl_configure_adapter(struct cxl *adapter, struct pci_dev *dev)
 	if ((rc = pnv_phb_to_cxl_mode(dev, OPAL_PHB_CAPI_MODE_SNOOP_ON)))
 		goto err;
 
+	if ((rc = cxl_setup_psl_timebase(adapter, dev)))
+		goto err;
+
 	if ((rc = cxl_register_psl_err_irq(adapter)))
 		goto err;