Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

sungem: improve ethtool output with internal pcs and serdes

Browse source 
From: Hermann Lauer <Hermann.Lauer@iwr.uni-heidelberg.de>

Attached is a patch which improves the output of ethtool (see below)
to some sensefull values with a sungem fibre card which uses the
sungem interal pcs connected to a serdes chip. The seriallink case in
the driver is untouched.

Most values are hardcoded, because gigabit fibre autoneg is anyways
limited and the driver don't really support much at the moment with
that hardware.

Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Hermann Lauer 2008-12-09 15:39:14 -08:00 committed by David S. Miller
parent 8d3a564da3
commit fbf0229e94
1 changed files with 15 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

15
drivers/net/sungem.c
View file

@ -2697,6 +2697,21 @@ static int gem_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
cmd->speed = 0;
cmd->duplex = cmd->port = cmd->phy_address =
cmd->transceiver = cmd->autoneg = 0;
/* serdes means usually a Fibre connector, with most fixed */
if (gp->phy_type == phy_serdes) {
cmd->port = PORT_FIBRE;
cmd->supported = (SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full |
SUPPORTED_FIBRE | SUPPORTED_Autoneg |
SUPPORTED_Pause | SUPPORTED_Asym_Pause);
cmd->advertising = cmd->supported;
cmd->transceiver = XCVR_INTERNAL;
if (gp->lstate == link_up)
cmd->speed = SPEED_1000;
cmd->duplex = DUPLEX_FULL;
cmd->autoneg = 1;
}
}
cmd->maxtxpkt = cmd->maxrxpkt = 0;