ARM: imx: Remove eukrea_mbimxsd35 non-dt support
eukrea_mbimxsd35 board has device tree support, so we can get rid of the board related files. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This commit is contained in:
Fabio Estevam
Shawn Guo
parent
b787f68c36
commit
f2f5549994
4 changed files with 0 additions and 560 deletions
|
|
@ -444,40 +444,6 @@ config MACH_MX35_3DS
|
|||
Include support for MX35PDK platform. This includes specific
|
||||
configurations for the board and its peripherals.
|
||||
|
||||
config MACH_EUKREA_CPUIMX35SD
|
||||
bool "Support Eukrea CPUIMX35 Platform"
|
||||
select IMX_HAVE_PLATFORM_FLEXCAN
|
||||
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
select IMX_HAVE_PLATFORM_IMX2_WDT
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select IMX_HAVE_PLATFORM_MXC_EHCI
|
||||
select IMX_HAVE_PLATFORM_MXC_NAND
|
||||
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
||||
select USB_ULPI_VIEWPORT if USB_ULPI
|
||||
select SOC_IMX35
|
||||
help
|
||||
Include support for Eukrea CPUIMX35 platform. This includes
|
||||
specific configurations for the board and its peripherals.
|
||||
|
||||
choice
|
||||
prompt "Baseboard"
|
||||
depends on MACH_EUKREA_CPUIMX35SD
|
||||
default MACH_EUKREA_MBIMXSD35_BASEBOARD
|
||||
|
||||
config MACH_EUKREA_MBIMXSD35_BASEBOARD
|
||||
bool "Eukrea MBIMXSD development board"
|
||||
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
||||
select IMX_HAVE_PLATFORM_IMX_SSI
|
||||
select IMX_HAVE_PLATFORM_IPU_CORE
|
||||
select IMX_HAVE_PLATFORM_SPI_IMX
|
||||
select LEDS_GPIO_REGISTER
|
||||
help
|
||||
This adds board specific devices that can be found on Eukrea's
|
||||
MBIMXSD evaluation board.
|
||||
|
||||
endchoice
|
||||
|
||||
config MACH_VPR200
|
||||
bool "Support VPR200 platform"
|
||||
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
|
|
|
|||
|
|
@ -73,8 +73,6 @@ obj-$(CONFIG_MACH_IMX31_DT) += imx31-dt.o
|
|||
# i.MX35 based machines
|
||||
obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
|
||||
obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
|
||||
obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o
|
||||
obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
|
||||
obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
|
||||
obj-$(CONFIG_MACH_IMX35_DT) += imx35-dt.o
|
||||
|
||||
|
|
|
|||
|
|
@ -1,318 +0,0 @@
|
|||
/*
|
||||
* Copyright (C) 2010 Eric Benard - eric@eukrea.com
|
||||
*
|
||||
* Based on pcm970-baseboard.c which is :
|
||||
* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||
* MA 02110-1301, USA.
|
||||
*/
|
||||
|
||||
#include <linux/types.h>
|
||||
#include <linux/init.h>
|
||||
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/leds.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <video/platform_lcd.h>
|
||||
#include <linux/i2c.h>
|
||||
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/time.h>
|
||||
#include <asm/mach/map.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "devices-imx35.h"
|
||||
#include "hardware.h"
|
||||
#include "iomux-mx35.h"
|
||||
|
||||
static const struct fb_videomode fb_modedb[] = {
|
||||
{
|
||||
.name = "CMO-QVGA",
|
||||
.refresh = 60,
|
||||
.xres = 320,
|
||||
.yres = 240,
|
||||
.pixclock = KHZ2PICOS(6500),
|
||||
.left_margin = 68,
|
||||
.right_margin = 20,
|
||||
.upper_margin = 15,
|
||||
.lower_margin = 4,
|
||||
.hsync_len = 30,
|
||||
.vsync_len = 3,
|
||||
.sync = 0,
|
||||
.vmode = FB_VMODE_NONINTERLACED,
|
||||
.flag = 0,
|
||||
},
|
||||
{
|
||||
.name = "DVI-VGA",
|
||||
.refresh = 60,
|
||||
.xres = 640,
|
||||
.yres = 480,
|
||||
.pixclock = 32000,
|
||||
.left_margin = 100,
|
||||
.right_margin = 100,
|
||||
.upper_margin = 7,
|
||||
.lower_margin = 100,
|
||||
.hsync_len = 7,
|
||||
.vsync_len = 7,
|
||||
.sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT |
|
||||
FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
|
||||
.vmode = FB_VMODE_NONINTERLACED,
|
||||
.flag = 0,
|
||||
},
|
||||
{
|
||||
.name = "DVI-SVGA",
|
||||
.refresh = 60,
|
||||
.xres = 800,
|
||||
.yres = 600,
|
||||
.pixclock = 25000,
|
||||
.left_margin = 75,
|
||||
.right_margin = 75,
|
||||
.upper_margin = 7,
|
||||
.lower_margin = 75,
|
||||
.hsync_len = 7,
|
||||
.vsync_len = 7,
|
||||
.sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT |
|
||||
FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
|
||||
.vmode = FB_VMODE_NONINTERLACED,
|
||||
.flag = 0,
|
||||
},
|
||||
};
|
||||
|
||||
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
|
||||
.name = "CMO-QVGA",
|
||||
.mode = fb_modedb,
|
||||
.num_modes = ARRAY_SIZE(fb_modedb),
|
||||
};
|
||||
|
||||
static const iomux_v3_cfg_t eukrea_mbimxsd_pads[] __initconst = {
|
||||
/* LCD */
|
||||
MX35_PAD_LD0__IPU_DISPB_DAT_0,
|
||||
MX35_PAD_LD1__IPU_DISPB_DAT_1,
|
||||
MX35_PAD_LD2__IPU_DISPB_DAT_2,
|
||||
MX35_PAD_LD3__IPU_DISPB_DAT_3,
|
||||
MX35_PAD_LD4__IPU_DISPB_DAT_4,
|
||||
MX35_PAD_LD5__IPU_DISPB_DAT_5,
|
||||
MX35_PAD_LD6__IPU_DISPB_DAT_6,
|
||||
MX35_PAD_LD7__IPU_DISPB_DAT_7,
|
||||
MX35_PAD_LD8__IPU_DISPB_DAT_8,
|
||||
MX35_PAD_LD9__IPU_DISPB_DAT_9,
|
||||
MX35_PAD_LD10__IPU_DISPB_DAT_10,
|
||||
MX35_PAD_LD11__IPU_DISPB_DAT_11,
|
||||
MX35_PAD_LD12__IPU_DISPB_DAT_12,
|
||||
MX35_PAD_LD13__IPU_DISPB_DAT_13,
|
||||
MX35_PAD_LD14__IPU_DISPB_DAT_14,
|
||||
MX35_PAD_LD15__IPU_DISPB_DAT_15,
|
||||
MX35_PAD_LD16__IPU_DISPB_DAT_16,
|
||||
MX35_PAD_LD17__IPU_DISPB_DAT_17,
|
||||
MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
|
||||
MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
|
||||
MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
|
||||
MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
|
||||
/* Backlight */
|
||||
MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
|
||||
/* LCD_PWR */
|
||||
MX35_PAD_D3_CLS__GPIO1_4,
|
||||
/* LED */
|
||||
MX35_PAD_LD23__GPIO3_29,
|
||||
/* SWITCH */
|
||||
MX35_PAD_LD19__GPIO3_25,
|
||||
/* UART2 */
|
||||
MX35_PAD_CTS2__UART2_CTS,
|
||||
MX35_PAD_RTS2__UART2_RTS,
|
||||
MX35_PAD_TXD2__UART2_TXD_MUX,
|
||||
MX35_PAD_RXD2__UART2_RXD_MUX,
|
||||
/* I2S */
|
||||
MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
|
||||
MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
|
||||
MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
|
||||
MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
|
||||
/* CAN2 */
|
||||
MX35_PAD_TX5_RX0__CAN2_TXCAN,
|
||||
MX35_PAD_TX4_RX1__CAN2_RXCAN,
|
||||
/* SDCARD */
|
||||
MX35_PAD_SD1_CMD__ESDHC1_CMD,
|
||||
MX35_PAD_SD1_CLK__ESDHC1_CLK,
|
||||
MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
|
||||
MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
|
||||
MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
|
||||
MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
|
||||
/* SD1 CD */
|
||||
MX35_PAD_LD18__GPIO3_24,
|
||||
/* SPI */
|
||||
MX35_PAD_CSPI1_MOSI__CSPI1_MOSI,
|
||||
MX35_PAD_CSPI1_MISO__CSPI1_MISO,
|
||||
MX35_PAD_CSPI1_SS0__GPIO1_18,
|
||||
MX35_PAD_CSPI1_SS1__GPIO1_19,
|
||||
MX35_PAD_CSPI1_SCLK__CSPI1_SCLK,
|
||||
MX35_PAD_CSPI1_SPI_RDY__GPIO3_5,
|
||||
};
|
||||
|
||||
#define GPIO_LED1 IMX_GPIO_NR(3, 29)
|
||||
#define GPIO_SWITCH1 IMX_GPIO_NR(3, 25)
|
||||
#define GPIO_LCDPWR IMX_GPIO_NR(1, 4)
|
||||
#define GPIO_SD1CD IMX_GPIO_NR(3, 24)
|
||||
#define GPIO_SPI1_SS0 IMX_GPIO_NR(1, 18)
|
||||
#define GPIO_SPI1_SS1 IMX_GPIO_NR(1, 19)
|
||||
#define GPIO_SPI1_IRQ IMX_GPIO_NR(3, 5)
|
||||
|
||||
static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
|
||||
unsigned int power)
|
||||
{
|
||||
if (power)
|
||||
gpio_direction_output(GPIO_LCDPWR, 1);
|
||||
else
|
||||
gpio_direction_output(GPIO_LCDPWR, 0);
|
||||
}
|
||||
|
||||
static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
|
||||
.set_power = eukrea_mbimxsd_lcd_power_set,
|
||||
};
|
||||
|
||||
static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
|
||||
.name = "platform-lcd",
|
||||
.dev.platform_data = &eukrea_mbimxsd_lcd_power_data,
|
||||
};
|
||||
|
||||
static struct gpio_led eukrea_mbimxsd_leds[] = {
|
||||
{
|
||||
.name = "led1",
|
||||
.default_trigger = "heartbeat",
|
||||
.active_low = 1,
|
||||
.gpio = GPIO_LED1,
|
||||
},
|
||||
};
|
||||
|
||||
static const struct gpio_led_platform_data
|
||||
eukrea_mbimxsd_led_info __initconst = {
|
||||
.leds = eukrea_mbimxsd_leds,
|
||||
.num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds),
|
||||
};
|
||||
|
||||
static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
|
||||
{
|
||||
.gpio = GPIO_SWITCH1,
|
||||
.code = BTN_0,
|
||||
.desc = "BP1",
|
||||
.active_low = 1,
|
||||
.wakeup = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static const struct gpio_keys_platform_data
|
||||
eukrea_mbimxsd_button_data __initconst = {
|
||||
.buttons = eukrea_mbimxsd_gpio_buttons,
|
||||
.nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
|
||||
};
|
||||
|
||||
static struct platform_device *platform_devices[] __initdata = {
|
||||
&eukrea_mbimxsd_lcd_powerdev,
|
||||
};
|
||||
|
||||
static const struct imxuart_platform_data uart_pdata __initconst = {
|
||||
.flags = IMXUART_HAVE_RTSCTS,
|
||||
};
|
||||
|
||||
static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
|
||||
{
|
||||
I2C_BOARD_INFO("tlv320aic23", 0x1a),
|
||||
},
|
||||
};
|
||||
|
||||
static const
|
||||
struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
|
||||
.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
|
||||
};
|
||||
|
||||
static struct esdhc_platform_data sd1_pdata = {
|
||||
.cd_gpio = GPIO_SD1CD,
|
||||
.cd_type = ESDHC_CD_GPIO,
|
||||
.wp_type = ESDHC_WP_NONE,
|
||||
};
|
||||
|
||||
static struct spi_board_info eukrea_mbimxsd35_spi_board_info[] __initdata = {
|
||||
{
|
||||
.modalias = "spidev",
|
||||
.max_speed_hz = 20000000,
|
||||
.bus_num = 0,
|
||||
.chip_select = 0,
|
||||
.mode = SPI_MODE_0,
|
||||
},
|
||||
{
|
||||
.modalias = "spidev",
|
||||
.max_speed_hz = 20000000,
|
||||
.bus_num = 0,
|
||||
.chip_select = 1,
|
||||
.mode = SPI_MODE_0,
|
||||
},
|
||||
};
|
||||
|
||||
static int eukrea_mbimxsd35_spi_cs[] = {GPIO_SPI1_SS0, GPIO_SPI1_SS1};
|
||||
|
||||
static const struct spi_imx_master eukrea_mbimxsd35_spi0_data __initconst = {
|
||||
.chipselect = eukrea_mbimxsd35_spi_cs,
|
||||
.num_chipselect = ARRAY_SIZE(eukrea_mbimxsd35_spi_cs),
|
||||
};
|
||||
|
||||
/*
|
||||
* system init for baseboard usage. Will be called by cpuimx35 init.
|
||||
*
|
||||
* Add platform devices present on this baseboard and init
|
||||
* them from CPU side as far as required to use them later on
|
||||
*/
|
||||
void __init eukrea_mbimxsd35_baseboard_init(void)
|
||||
{
|
||||
if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
|
||||
ARRAY_SIZE(eukrea_mbimxsd_pads)))
|
||||
printk(KERN_ERR "error setting mbimxsd pads !\n");
|
||||
|
||||
imx35_add_imx_uart1(&uart_pdata);
|
||||
imx35_add_ipu_core();
|
||||
imx35_add_mx3_sdc_fb(&mx3fb_pdata);
|
||||
|
||||
imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
|
||||
|
||||
imx35_add_flexcan1();
|
||||
imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
|
||||
|
||||
gpio_request(GPIO_LED1, "LED1");
|
||||
gpio_direction_output(GPIO_LED1, 1);
|
||||
gpio_free(GPIO_LED1);
|
||||
|
||||
gpio_request(GPIO_SWITCH1, "SWITCH1");
|
||||
gpio_direction_input(GPIO_SWITCH1);
|
||||
gpio_free(GPIO_SWITCH1);
|
||||
|
||||
gpio_request(GPIO_LCDPWR, "LCDPWR");
|
||||
gpio_direction_output(GPIO_LCDPWR, 1);
|
||||
|
||||
i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
|
||||
ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
|
||||
|
||||
gpio_request(GPIO_SPI1_IRQ, "SPI1_IRQ");
|
||||
gpio_direction_input(GPIO_SPI1_IRQ);
|
||||
gpio_free(GPIO_SPI1_IRQ);
|
||||
imx35_add_spi_imx0(&eukrea_mbimxsd35_spi0_data);
|
||||
spi_register_board_info(eukrea_mbimxsd35_spi_board_info,
|
||||
ARRAY_SIZE(eukrea_mbimxsd35_spi_board_info));
|
||||
|
||||
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
|
||||
gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
|
||||
imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
|
||||
imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
|
||||
}
|
||||
|
|
@ -1,206 +0,0 @@
|
|||
/*
|
||||
* Copyright (C) 2010 Eric Benard - eric@eukrea.com
|
||||
* Copyright (C) 2009 Sascha Hauer, Pengutronix
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <linux/types.h>
|
||||
#include <linux/init.h>
|
||||
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mtd/physmap.h>
|
||||
#include <linux/memory.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/i2c/tsc2007.h>
|
||||
#include <linux/usb/otg.h>
|
||||
#include <linux/usb/ulpi.h>
|
||||
#include <linux/i2c-gpio.h>
|
||||
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/time.h>
|
||||
#include <asm/mach/map.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "devices-imx35.h"
|
||||
#include "ehci.h"
|
||||
#include "eukrea-baseboards.h"
|
||||
#include "hardware.h"
|
||||
#include "iomux-mx35.h"
|
||||
|
||||
static const struct imxuart_platform_data uart_pdata __initconst = {
|
||||
.flags = IMXUART_HAVE_RTSCTS,
|
||||
};
|
||||
|
||||
static const struct imxi2c_platform_data
|
||||
eukrea_cpuimx35_i2c0_data __initconst = {
|
||||
.bitrate = 100000,
|
||||
};
|
||||
|
||||
#define TSC2007_IRQGPIO IMX_GPIO_NR(3, 2)
|
||||
static int tsc2007_get_pendown_state(struct device *dev)
|
||||
{
|
||||
return !gpio_get_value(TSC2007_IRQGPIO);
|
||||
}
|
||||
|
||||
static struct tsc2007_platform_data tsc2007_info = {
|
||||
.model = 2007,
|
||||
.x_plate_ohms = 180,
|
||||
.get_pendown_state = tsc2007_get_pendown_state,
|
||||
};
|
||||
|
||||
static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
|
||||
{
|
||||
I2C_BOARD_INFO("pcf8563", 0x51),
|
||||
}, {
|
||||
I2C_BOARD_INFO("tsc2007", 0x48),
|
||||
.platform_data = &tsc2007_info,
|
||||
/* irq number is run-time assigned */
|
||||
},
|
||||
};
|
||||
|
||||
static const iomux_v3_cfg_t eukrea_cpuimx35_pads[] __initconst = {
|
||||
/* UART1 */
|
||||
MX35_PAD_CTS1__UART1_CTS,
|
||||
MX35_PAD_RTS1__UART1_RTS,
|
||||
MX35_PAD_TXD1__UART1_TXD_MUX,
|
||||
MX35_PAD_RXD1__UART1_RXD_MUX,
|
||||
/* FEC */
|
||||
MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
|
||||
MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
|
||||
MX35_PAD_FEC_RX_DV__FEC_RX_DV,
|
||||
MX35_PAD_FEC_COL__FEC_COL,
|
||||
MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
|
||||
MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
|
||||
MX35_PAD_FEC_TX_EN__FEC_TX_EN,
|
||||
MX35_PAD_FEC_MDC__FEC_MDC,
|
||||
MX35_PAD_FEC_MDIO__FEC_MDIO,
|
||||
MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
|
||||
MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
|
||||
MX35_PAD_FEC_CRS__FEC_CRS,
|
||||
MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
|
||||
MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
|
||||
MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
|
||||
MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
|
||||
MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
|
||||
MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
|
||||
/* I2C1 */
|
||||
MX35_PAD_I2C1_CLK__I2C1_SCL,
|
||||
MX35_PAD_I2C1_DAT__I2C1_SDA,
|
||||
/* TSC2007 IRQ */
|
||||
MX35_PAD_ATA_DA2__GPIO3_2,
|
||||
};
|
||||
|
||||
static const struct mxc_nand_platform_data
|
||||
eukrea_cpuimx35_nand_board_info __initconst = {
|
||||
.width = 1,
|
||||
.hw_ecc = 1,
|
||||
.flash_bbt = 1,
|
||||
};
|
||||
|
||||
static int eukrea_cpuimx35_otg_init(struct platform_device *pdev)
|
||||
{
|
||||
return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
|
||||
}
|
||||
|
||||
static const struct mxc_usbh_platform_data otg_pdata __initconst = {
|
||||
.init = eukrea_cpuimx35_otg_init,
|
||||
.portsc = MXC_EHCI_MODE_UTMI,
|
||||
};
|
||||
|
||||
static int eukrea_cpuimx35_usbh1_init(struct platform_device *pdev)
|
||||
{
|
||||
return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
|
||||
MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
|
||||
}
|
||||
|
||||
static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
|
||||
.init = eukrea_cpuimx35_usbh1_init,
|
||||
.portsc = MXC_EHCI_MODE_SERIAL,
|
||||
};
|
||||
|
||||
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
|
||||
.operating_mode = FSL_USB2_DR_DEVICE,
|
||||
.phy_mode = FSL_USB2_PHY_UTMI,
|
||||
.workaround = FLS_USB2_WORKAROUND_ENGCM09152,
|
||||
};
|
||||
|
||||
static bool otg_mode_host __initdata;
|
||||
|
||||
static int __init eukrea_cpuimx35_otg_mode(char *options)
|
||||
{
|
||||
if (!strcmp(options, "host"))
|
||||
otg_mode_host = true;
|
||||
else if (!strcmp(options, "device"))
|
||||
otg_mode_host = false;
|
||||
else
|
||||
pr_info("otg_mode neither \"host\" nor \"device\". "
|
||||
"Defaulting to device\n");
|
||||
return 1;
|
||||
}
|
||||
__setup("otg_mode=", eukrea_cpuimx35_otg_mode);
|
||||
|
||||
/*
|
||||
* Board specific initialization.
|
||||
*/
|
||||
static void __init eukrea_cpuimx35_init(void)
|
||||
{
|
||||
imx35_soc_init();
|
||||
|
||||
mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads,
|
||||
ARRAY_SIZE(eukrea_cpuimx35_pads));
|
||||
|
||||
imx35_add_fec(NULL);
|
||||
imx35_add_imx2_wdt();
|
||||
|
||||
imx35_add_imx_uart0(&uart_pdata);
|
||||
imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info);
|
||||
|
||||
eukrea_cpuimx35_i2c_devices[1].irq = gpio_to_irq(TSC2007_IRQGPIO);
|
||||
i2c_register_board_info(0, eukrea_cpuimx35_i2c_devices,
|
||||
ARRAY_SIZE(eukrea_cpuimx35_i2c_devices));
|
||||
imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data);
|
||||
|
||||
if (otg_mode_host)
|
||||
imx35_add_mxc_ehci_otg(&otg_pdata);
|
||||
else
|
||||
imx35_add_fsl_usb2_udc(&otg_device_pdata);
|
||||
|
||||
imx35_add_mxc_ehci_hs(&usbh1_pdata);
|
||||
|
||||
#ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD
|
||||
eukrea_mbimxsd35_baseboard_init();
|
||||
#endif
|
||||
}
|
||||
|
||||
static void __init eukrea_cpuimx35_timer_init(void)
|
||||
{
|
||||
mx35_clocks_init();
|
||||
}
|
||||
|
||||
MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35")
|
||||
/* Maintainer: Eukrea Electromatique */
|
||||
.atag_offset = 0x100,
|
||||
.map_io = mx35_map_io,
|
||||
.init_early = imx35_init_early,
|
||||
.init_irq = mx35_init_irq,
|
||||
.init_time = eukrea_cpuimx35_timer_init,
|
||||
.init_machine = eukrea_cpuimx35_init,
|
||||
.restart = mxc_restart,
|
||||
MACHINE_END
|
||||
Loading…
Reference in a new issue