From f1f5465782a96201798ef1e8167ed3ffaefdb30d Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Fri, 20 Feb 2009 02:32:30 +0100
Subject: [PATCH] [ARM] mv78xx0: enable eth2/eth3 on the mv78xx0 A0 development
board
The A0 revision of the mv78xx0 development board has four ethernet
ports, with PHY IDs 8-11, whereas the Z0 version has two, with PHY
addresses 8-9. This patch configures the third and fourth ethernet
port to use the PHY addresses on the A0 board to enable use of those
ports -- if we are running on a Z0 board, the ge10/11 setup code in
common.c will force these back to PHYless mode.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
---
arch/arm/mach-mv78xx0/db78x00-bp-setup.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index 2e285bbb7bbd..be0a59a6139e 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -28,15 +28,11 @@ static struct mv643xx_eth_platform_data db78x00_ge01_data = {
};
static struct mv643xx_eth_platform_data db78x00_ge10_data = {
- .phy_addr = MV643XX_ETH_PHY_NONE,
- .speed = SPEED_1000,
- .duplex = DUPLEX_FULL,
+ .phy_addr = MV643XX_ETH_PHY_ADDR(10),
};
static struct mv643xx_eth_platform_data db78x00_ge11_data = {
- .phy_addr = MV643XX_ETH_PHY_NONE,
- .speed = SPEED_1000,
- .duplex = DUPLEX_FULL,
+ .phy_addr = MV643XX_ETH_PHY_ADDR(11),
};
static struct mv_sata_platform_data db78x00_sata_data = {