Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

ARM: integrator: move CP CLCD display to DTS

Browse source 
The Integrator/CP CLCD VGA display can now be registered
fully from the device tree. Delete the board file code and
add the display definition to the DTS.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Linus Walleij 2016-08-29 11:30:18 +02:00
parent b2da116cbe
commit e3f6176021
2 changed files with 36 additions and 58 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

37
arch/arm/boot/dts/integratorcp.dts
View file

@ -226,7 +226,42 @@
reg = <0xC0000000 0x1000>;
interrupts = <22>;
clocks = <&auxosc>, <&pclk>;
clock-names = "clcd", "apb_pclk";
clock-names = "clcdclk", "apb_pclk";
port {
/*
* The VGA connected is implemented with a
* THS8134A triple DAC that can be run in 24bit
* or 16bit RGB mode.
*/
clcd_pads: endpoint {
remote-endpoint = <&clcd_panel>;
arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
};
};
panel {
compatible = "panel-dpi";
port {
clcd_panel: endpoint {
remote-endpoint = <&clcd_pads>;
};
};
/* Standard 640x480 VGA timings */
panel-timing {
clock-frequency = <25175000>;
hactive = <640>;
hback-porch = <48>;
hfront-porch = <16>;
hsync-len = <96>;
vactive = <480>;
vback-porch = <33>;
vfront-porch = <10>;
vsync-len = <2>;
};
};
};
};
};

57
arch/arm/mach-integrator/integrator_cp.c
View file

@ -17,8 +17,6 @@
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/amba/kmi.h>
#include <linux/amba/clcd.h>
#include <linux/platform_data/video-clcd-versatile.h>
#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <linux/irqchip.h>
@ -42,8 +40,6 @@
/* Base address to the CP controller */
static void __iomem *intcp_con_base;
#define INTCP_PA_CLCD_BASE 0xc0000000
/*
* Logical Physical
* f1000000 10000000 Core module registers
@ -121,57 +117,6 @@ static struct mmci_platform_data mmc_data = {
.gpio_cd = -1,
};
/*
* CLCD support
*/
/*
* Ensure VGA is selected.
*/
static void cp_clcd_enable(struct clcd_fb *fb)
{
struct fb_var_screeninfo *var = &fb->fb.var;
u32 val = CM_CTRL_STATIC1 | CM_CTRL_STATIC2
| CM_CTRL_LCDEN0 | CM_CTRL_LCDEN1;
if (var->bits_per_pixel <= 8 ||
(var->bits_per_pixel == 16 && var->green.length == 5))
/* Pseudocolor, RGB555, BGR555 */
val |= CM_CTRL_LCDMUXSEL_VGA555_TFT555;
else if (fb->fb.var.bits_per_pixel <= 16)
/* truecolor RGB565 */
val |= CM_CTRL_LCDMUXSEL_VGA565_TFT555;
else
val = 0; /* no idea for this, don't trust the docs */
cm_control(CM_CTRL_LCDMUXSEL_MASK|
CM_CTRL_LCDEN0|
CM_CTRL_LCDEN1|
CM_CTRL_STATIC1|
CM_CTRL_STATIC2|
CM_CTRL_STATIC|
CM_CTRL_n24BITEN, val);
}
static int cp_clcd_setup(struct clcd_fb *fb)
{
fb->panel = versatile_clcd_get_panel("VGA");
if (!fb->panel)
return -EINVAL;
return versatile_clcd_setup_dma(fb, SZ_1M);
}
static struct clcd_board clcd_data = {
.name = "Integrator/CP",
.caps = CLCD_CAP_5551 | CLCD_CAP_RGB565 | CLCD_CAP_888,
.check = clcdfb_check,
.decode = clcdfb_decode,
.enable = cp_clcd_enable,
.setup = cp_clcd_setup,
.mmap = versatile_clcd_mmap_dma,
.remove = versatile_clcd_remove_dma,
};
#define REFCOUNTER (__io_address(INTEGRATOR_HDR_BASE) + 0x28)
static u64 notrace intcp_read_sched_clock(void)
@ -209,8 +154,6 @@ static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = {
"mmci", &mmc_data),
OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_CP_AACI_BASE,
"aaci", &mmc_data),
OF_DEV_AUXDATA("arm,primecell", INTCP_PA_CLCD_BASE,
"clcd", &clcd_data),
{ /* sentinel */ },
};