Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

sh: use ctrl_in/out for on chip pci access

Browse source 
This patch makes sure ctrl_inN/outN are used instead of inN/outN for on chip
pci registers. Without this patch addresses may be adjusted using the value
in generic_io_base. This patch makes it possible to set generic_io_base and
have pci without reading and writing all over the place.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Katsuya MATSUBARA <matsu@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This commit is contained in:
Magnus Damm 2008-02-14 13:52:43 +09:00 committed by Paul Mundt
parent f99cb7a43c
commit e036eaa681
6 changed files with 37 additions and 37 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
arch/sh/drivers/pci/fixups-lboxre2.c
View file

@ -18,7 +18,7 @@ int pci_fixup_pcic(void)
{
unsigned long bcr1, mcr;
bcr1 = inl(SH7751_BCR1);
bcr1 = ctrl_inl(SH7751_BCR1);
bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
pci_write_reg(bcr1, SH4_PCIBCR1);
@ -28,7 +28,7 @@ int pci_fixup_pcic(void)
pci_write_reg(0xfb900047, SH7751_PCICONF1);
pci_write_reg(0xab000001, SH7751_PCICONF4);
mcr = inl(SH7751_MCR);
mcr = ctrl_inl(SH7751_MCR);
mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
pci_write_reg(mcr, SH4_PCIMCR);

4
arch/sh/drivers/pci/fixups-rts7751r2d.c
View file

@ -19,7 +19,7 @@ int pci_fixup_pcic(void)
{
unsigned long bcr1, mcr;
bcr1 = inl(SH7751_BCR1);
bcr1 = ctrl_inl(SH7751_BCR1);
bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
pci_write_reg(bcr1, SH4_PCIBCR1);
@ -30,7 +30,7 @@ int pci_fixup_pcic(void)
pci_write_reg(0xfb900047, SH7751_PCICONF1);
pci_write_reg(0xab000001, SH7751_PCICONF4);
mcr = inl(SH7751_MCR);
mcr = ctrl_inl(SH7751_MCR);
mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
pci_write_reg(mcr, SH4_PCIMCR);

44
arch/sh/drivers/pci/ops-dreamcast.c
View file

@ -83,9 +83,9 @@ static int gapspci_read(struct pci_bus *bus, unsigned int devfn, int where, int
return PCIBIOS_DEVICE_NOT_FOUND;
switch (size) {
case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break;
case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break;
case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break;
case 1: *val = ctrl_inb(GAPSPCI_BBA_CONFIG+where); break;
case 2: *val = ctrl_inw(GAPSPCI_BBA_CONFIG+where); break;
case 4: *val = ctrl_inl(GAPSPCI_BBA_CONFIG+where); break;
}
return PCIBIOS_SUCCESSFUL;
@ -97,9 +97,9 @@ static int gapspci_write(struct pci_bus *bus, unsigned int devfn, int where, int
return PCIBIOS_DEVICE_NOT_FOUND;
switch (size) {
case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break;
case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break;
case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break;
case 1: ctrl_outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break;
case 2: ctrl_outw((u16)val, GAPSPCI_BBA_CONFIG+where); break;
case 4: ctrl_outl((u32)val, GAPSPCI_BBA_CONFIG+where); break;
}
return PCIBIOS_SUCCESSFUL;
@ -127,36 +127,36 @@ int __init gapspci_init(void)
*/
for (i=0; i<16; i++)
idbuf[i] = inb(GAPSPCI_REGS+i);
idbuf[i] = ctrl_inb(GAPSPCI_REGS+i);
if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16))
return -ENODEV;
outl(0x5a14a501, GAPSPCI_REGS+0x18);
ctrl_outl(0x5a14a501, GAPSPCI_REGS+0x18);
for (i=0; i<1000000; i++)
;
if (inl(GAPSPCI_REGS+0x18) != 1)
if (ctrl_inl(GAPSPCI_REGS+0x18) != 1)
return -EINVAL;
outl(0x01000000, GAPSPCI_REGS+0x20);
outl(0x01000000, GAPSPCI_REGS+0x24);
ctrl_outl(0x01000000, GAPSPCI_REGS+0x20);
ctrl_outl(0x01000000, GAPSPCI_REGS+0x24);
outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28);
outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c);
ctrl_outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28);
ctrl_outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c);
outl(1, GAPSPCI_REGS+0x14);
outl(1, GAPSPCI_REGS+0x34);
ctrl_outl(1, GAPSPCI_REGS+0x14);
ctrl_outl(1, GAPSPCI_REGS+0x34);
/* Setting Broadband Adapter */
outw(0xf900, GAPSPCI_BBA_CONFIG+0x06);
outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30);
outb(0x00, GAPSPCI_BBA_CONFIG+0x3c);
outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d);
outw(0x0006, GAPSPCI_BBA_CONFIG+0x04);
outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
ctrl_outw(0xf900, GAPSPCI_BBA_CONFIG+0x06);
ctrl_outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30);
ctrl_outb(0x00, GAPSPCI_BBA_CONFIG+0x3c);
ctrl_outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d);
ctrl_outw(0x0006, GAPSPCI_BBA_CONFIG+0x04);
ctrl_outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
ctrl_outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
return 0;
}

4
arch/sh/drivers/pci/pci-sh4.h
View file

@ -172,11 +172,11 @@ struct sh4_pci_address_map {
static inline void pci_write_reg(unsigned long val, unsigned long reg)
{
outl(val, PCI_REG(reg));
ctrl_outl(val, PCI_REG(reg));
}
static inline unsigned long pci_read_reg(unsigned long reg)
{
return inl(PCI_REG(reg));
return ctrl_inl(PCI_REG(reg));
}
#endif /* __PCI_SH4_H */

16
arch/sh/drivers/pci/pci-sh7751.c
View file

@ -58,7 +58,7 @@ static int __init __area_sdram_check(unsigned int area)
{
u32 word;
word = inl(SH7751_BCR1);
word = ctrl_inl(SH7751_BCR1);
/* check BCR for SDRAM in area */
if (((word >> area) & 1) == 0) {
printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%x\n",
@ -67,7 +67,7 @@ static int __init __area_sdram_check(unsigned int area)
}
pci_write_reg(word, SH4_PCIBCR1);
word = (u16)inw(SH7751_BCR2);
word = (u16)ctrl_inw(SH7751_BCR2);
/* check BCR2 for 32bit SDRAM interface*/
if (((word >> (area << 1)) & 0x3) != 0x3) {
printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%x\n",
@ -85,9 +85,9 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
u32 word;
/* Set the BCR's to enable PCI access */
reg = inl(SH7751_BCR1);
reg = ctrl_inl(SH7751_BCR1);
reg |= 0x80000;
outl(reg, SH7751_BCR1);
ctrl_outl(reg, SH7751_BCR1);
/* Turn the clocks back on (not done in reset)*/
pci_write_reg(0, SH4_PCICLKR);
@ -179,13 +179,13 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
return 0;
/* configure the wait control registers */
word = inl(SH7751_WCR1);
word = ctrl_inl(SH7751_WCR1);
pci_write_reg(word, SH4_PCIWCR1);
word = inl(SH7751_WCR2);
word = ctrl_inl(SH7751_WCR2);
pci_write_reg(word, SH4_PCIWCR2);
word = inl(SH7751_WCR3);
word = ctrl_inl(SH7751_WCR3);
pci_write_reg(word, SH4_PCIWCR3);
word = inl(SH7751_MCR);
word = ctrl_inl(SH7751_MCR);
pci_write_reg(word, SH4_PCIMCR);
/* NOTE: I'm ignoring the PCI error IRQs for now..

2
arch/sh/drivers/pci/pci-sh7780.c
View file

@ -52,7 +52,7 @@ static int __init sh7780_pci_init(void)
pr_debug("PCI: Starting intialization.\n");
outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */
ctrl_outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */
/* check for SH7780/SH7780R hardware */
id = pci_read_reg(SH7780_PCIVID);