Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Merge branch 'linus' into irq/core

Browse source 
Reason: Get upstream fixes integrated before further modifications.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This commit is contained in:
Thomas Gleixner 2012-03-13 16:34:48 +01:00
commit df8d291f28
581 changed files with 4067 additions and 2424 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
Documentation/devicetree/bindings/gpio/led.txt
View file

@ -7,9 +7,9 @@ Each LED is represented as a sub-node of the gpio-leds device. Each
node's name represents the name of the corresponding LED.
LED sub-node properties:
- gpios : Should specify the LED's GPIO, see "Specifying GPIO information
for devices" in Documentation/devicetree/booting-without-of.txt. Active
low LEDs should be indicated using flags in the GPIO specifier.
- gpios : Should specify the LED's GPIO, see "gpios property" in
Documentation/devicetree/gpio.txt. Active low LEDs should be
indicated using flags in the GPIO specifier.
- label : (optional) The label for this LED. If omitted, the label is
taken from the node name (excluding the unit address).
- linux,default-trigger : (optional) This parameter, if present, is a

1
Documentation/devicetree/bindings/vendor-prefixes.txt
View file

@ -30,6 +30,7 @@ national National Semiconductor
nintendo Nintendo
nvidia NVIDIA
nxp NXP Semiconductors
picochip Picochip Ltd
powervr Imagination Technologies
qcom Qualcomm, Inc.
ramtron Ramtron International

26
Documentation/hwmon/jc42
View file

@ -7,21 +7,29 @@ Supported chips:
Addresses scanned: I2C 0x18 - 0x1f
Datasheets:
http://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf
* IDT TSE2002B3, TS3000B3
Prefix: 'tse2002b3', 'ts3000b3'
* Atmel AT30TS00
Prefix: 'at30ts00'
Addresses scanned: I2C 0x18 - 0x1f
Datasheets:
http://www.idt.com/products/getdoc.cfm?docid=18715691
http://www.idt.com/products/getdoc.cfm?docid=18715692
http://www.atmel.com/Images/doc8585.pdf
* IDT TSE2002B3, TSE2002GB2, TS3000B3, TS3000GB2
Prefix: 'tse2002', 'ts3000'
Addresses scanned: I2C 0x18 - 0x1f
Datasheets:
http://www.idt.com/sites/default/files/documents/IDT_TSE2002B3C_DST_20100512_120303152056.pdf
http://www.idt.com/sites/default/files/documents/IDT_TSE2002GB2A1_DST_20111107_120303145914.pdf
http://www.idt.com/sites/default/files/documents/IDT_TS3000B3A_DST_20101129_120303152013.pdf
http://www.idt.com/sites/default/files/documents/IDT_TS3000GB2A1_DST_20111104_120303151012.pdf
* Maxim MAX6604
Prefix: 'max6604'
Addresses scanned: I2C 0x18 - 0x1f
Datasheets:
http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf
* Microchip MCP9805, MCP98242, MCP98243, MCP9843
Prefixes: 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843'
* Microchip MCP9804, MCP9805, MCP98242, MCP98243, MCP9843
Prefixes: 'mcp9804', 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843'
Addresses scanned: I2C 0x18 - 0x1f
Datasheets:
http://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf
http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf
http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf
http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf
@ -48,6 +56,12 @@ Supported chips:
Datasheets:
http://www.st.com/stonline/products/literature/ds/13447/stts424.pdf
http://www.st.com/stonline/products/literature/ds/13448/stts424e02.pdf
* ST Microelectronics STTS2002, STTS3000
Prefix: 'stts2002', 'stts3000'
Addresses scanned: I2C 0x18 - 0x1f
Datasheets:
http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00225278.pdf
http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATA_BRIEF/CD00270920.pdf
* JEDEC JC 42.4 compliant temperature sensor chips
Prefix: 'jc42'
Addresses scanned: I2C 0x18 - 0x1f

3
Documentation/input/alps.txt
View file

@ -13,7 +13,8 @@ Detection
All ALPS touchpads should respond to the "E6 report" command sequence:
E8-E6-E6-E6-E9. An ALPS touchpad should respond with either 00-00-0A or
00-00-64.
00-00-64 if no buttons are pressed. The bits 0-2 of the first byte will be 1s
if some buttons are pressed.
If the E6 report is successful, the touchpad model is identified using the "E7
report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is

6
Documentation/kernel-parameters.txt
View file

@ -2211,6 +2211,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
default: off.
printk.always_kmsg_dump=
Trigger kmsg_dump for cases other than kernel oops or
panics
Format: <bool> (1/Y/y=enable, 0/N/n=disable)
default: disabled
printk.time= Show timing data prefixed to each printk message line
Format: <bool> (1/Y/y=enable, 0/N/n=disable)

21
MAINTAINERS
View file

@ -269,7 +269,6 @@ S: Orphan
F: drivers/platform/x86/wmi.c
AD1889 ALSA SOUND DRIVER
M: Kyle McMartin <kyle@mcmartin.ca>
M: Thibaut Varene <T-Bone@parisc-linux.org>
W: http://wiki.parisc-linux.org/AD1889
L: linux-parisc@vger.kernel.org
@ -963,7 +962,7 @@ F: drivers/tty/serial/msm_serial.c
F: drivers/platform/msm/
F: drivers/*/pm8???-*
F: include/linux/mfd/pm8xxx/
T: git git://codeaurora.org/quic/kernel/davidb/linux-msm.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git
S: Maintained
ARM/TOSA MACHINE SUPPORT
@ -1311,7 +1310,7 @@ F: drivers/atm/
F: include/linux/atm*
ATMEL AT91 MCI DRIVER
M: Nicolas Ferre <nicolas.ferre@atmel.com>
M: Ludovic Desroches <ludovic.desroches@atmel.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.atmel.com/products/AT91/
W: http://www.at91.com/
@ -1319,7 +1318,7 @@ S: Maintained
F: drivers/mmc/host/at91_mci.c
ATMEL AT91 / AT32 MCI DRIVER
M: Nicolas Ferre <nicolas.ferre@atmel.com>
M: Ludovic Desroches <ludovic.desroches@atmel.com>
S: Maintained
F: drivers/mmc/host/atmel-mci.c
F: drivers/mmc/host/atmel-mci-regs.h
@ -3047,7 +3046,6 @@ F: drivers/hwspinlock/hwspinlock_*
F: include/linux/hwspinlock.h
HARMONY SOUND DRIVER
M: Kyle McMartin <kyle@mcmartin.ca>
L: linux-parisc@vger.kernel.org
S: Maintained
F: sound/parisc/harmony.*
@ -3782,7 +3780,7 @@ F: Documentation/kdump/
KERNEL AUTOMOUNTER v4 (AUTOFS4)
M: Ian Kent <raven@themaw.net>
L: autofs@linux.kernel.org
L: autofs@vger.kernel.org
S: Maintained
F: fs/autofs4/
@ -4687,7 +4685,7 @@ NTFS FILESYSTEM
M: Anton Altaparmakov <anton@tuxera.com>
L: linux-ntfs-dev@lists.sourceforge.net
W: http://www.tuxera.com/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs.git
S: Supported
F: Documentation/filesystems/ntfs.txt
F: fs/ntfs/
@ -5000,9 +4998,8 @@ F: Documentation/blockdev/paride.txt
F: drivers/block/paride/
PARISC ARCHITECTURE
M: Kyle McMartin <kyle@mcmartin.ca>
M: Helge Deller <deller@gmx.de>
M: "James E.J. Bottomley" <jejb@parisc-linux.org>
M: Helge Deller <deller@gmx.de>
L: linux-parisc@vger.kernel.org
W: http://www.parisc-linux.org/
Q: http://patchwork.kernel.org/project/linux-parisc/list/
@ -5861,7 +5858,7 @@ S: Maintained
F: drivers/mmc/host/sdhci-spear.c
SECURITY SUBSYSTEM
M: James Morris <jmorris@namei.org>
M: James Morris <james.l.morris@oracle.com>
L: linux-security-module@vger.kernel.org (suggested Cc:)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security.git
W: http://security.wiki.kernel.org/
@ -5874,7 +5871,7 @@ S: Supported
SELINUX SECURITY MODULE
M: Stephen Smalley <sds@tycho.nsa.gov>
M: James Morris <jmorris@namei.org>
M: James Morris <james.l.morris@oracle.com>
M: Eric Paris <eparis@parisplace.org>
L: selinux@tycho.nsa.gov (subscribers-only, general discussion)
W: http://selinuxproject.org
@ -7274,7 +7271,7 @@ WATCHDOG DEVICE DRIVERS
M: Wim Van Sebroeck <wim@iguana.be>
L: linux-watchdog@vger.kernel.org
W: http://www.linux-watchdog.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git
T: git git://www.linux-watchdog.org/linux-watchdog.git
S: Maintained
F: Documentation/watchdog/
F: drivers/watchdog/

2
Makefile
View file

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 3
SUBLEVEL = 0
EXTRAVERSION = -rc4
EXTRAVERSION = -rc7
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*

2
arch/alpha/include/asm/futex.h
View file

@ -108,7 +108,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
" lda $31,3b-2b(%0)\n"
" .previous\n"
: "+r"(ret), "=&r"(prev), "=&r"(cmp)
: "r"(uaddr), "r"((long)oldval), "r"(newval)
: "r"(uaddr), "r"((long)(int)oldval), "r"(newval)
: "memory");
*uval = prev;

2
arch/arm/Kconfig
View file

@ -1280,7 +1280,7 @@ config ARM_ERRATA_743622
depends on CPU_V7
help
This option enables the workaround for the 743622 Cortex-A9
(r2p0..r2p2) erratum. Under very rare conditions, a faulty
(r2p*) erratum. Under very rare conditions, a faulty
optimisation in the Cortex-A9 Store Buffer may lead to data
corruption. This workaround sets a specific bit in the diagnostic
register of the Cortex-A9 which disables the Store Buffer

1
arch/arm/boot/.gitignore vendored
View file

@ -3,3 +3,4 @@ zImage
xipImage
bootpImage
uImage
*.dtb

7
arch/arm/common/it8152.c
View file

@ -320,13 +320,6 @@ int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
return -EBUSY;
}
/*
* If we set up a device for bus mastering, we need to check the latency
* timer as we don't have even crappy BIOSes to set it properly.
* The implementation is from arch/i386/pci/i386.c
*/
unsigned int pcibios_max_latency = 255;
/* ITE bridge requires setting latency timer to avoid early bus access
termination by PCI bus master devices
*/

3
arch/arm/common/pl330.c
View file

@ -1502,12 +1502,13 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
struct pl330_thread *thrd = ch_id;
struct pl330_dmac *pl330;
unsigned long flags;
int ret = 0, active = thrd->req_running;
int ret = 0, active;
if (!thrd || thrd->free || thrd->dmac->state == DYING)
return -EINVAL;
pl330 = thrd->dmac;
active = thrd->req_running;
spin_lock_irqsave(&pl330->lock, flags);

5
arch/arm/include/asm/assembler.h
View file

@ -137,6 +137,11 @@
disable_irq
.endm
.macro save_and_disable_irqs_notrace, oldcpsr
mrs \oldcpsr, cpsr
disable_irq_notrace
.endm
/*
* Restore interrupt state previously stored in a register. We don't
* guarantee that this will preserve the flags.

2
arch/arm/include/asm/hardware/pl330.h
View file

@ -41,7 +41,7 @@ enum pl330_dstcachectrl {
DCCTRL1, /* Bufferable only */
DCCTRL2, /* Cacheable, but do not allocate */
DCCTRL3, /* Cacheable and bufferable, but do not allocate */
DINVALID1 = 8,
DINVALID1, /* AWCACHE = 0x1000 */
DINVALID2,
DCCTRL6, /* Cacheable write-through, allocate on writes only */
DCCTRL7, /* Cacheable write-back, allocate on writes only */

2
arch/arm/include/asm/pmu.h
View file

@ -134,7 +134,7 @@ int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type);
u64 armpmu_event_update(struct perf_event *event,
struct hw_perf_event *hwc,
int idx, int overflow);
int idx);
int armpmu_event_set_period(struct perf_event *event,
struct hw_perf_event *hwc,

1
arch/arm/include/asm/processor.h
View file

@ -22,6 +22,7 @@
#include <asm/hw_breakpoint.h>
#include <asm/ptrace.h>
#include <asm/types.h>
#include <asm/system.h>
#ifdef __KERNEL__
#define STACK_TOP ((current->personality & ADDR_LIMIT_32BIT) ? \

1
arch/arm/kernel/ecard.c
View file

@ -242,6 +242,7 @@ static void ecard_init_pgtables(struct mm_struct *mm)
memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE));
vma.vm_flags = VM_EXEC;
vma.vm_mm = mm;
flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE);

45
arch/arm/kernel/perf_event.c
View file

@ -180,7 +180,7 @@ armpmu_event_set_period(struct perf_event *event,
u64
armpmu_event_update(struct perf_event *event,
struct hw_perf_event *hwc,
int idx, int overflow)
int idx)
{
struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
u64 delta, prev_raw_count, new_raw_count;
@ -193,13 +193,7 @@ armpmu_event_update(struct perf_event *event,
new_raw_count) != prev_raw_count)
goto again;
new_raw_count &= armpmu->max_period;
prev_raw_count &= armpmu->max_period;
if (overflow)
delta = armpmu->max_period - prev_raw_count + new_raw_count + 1;
else
delta = new_raw_count - prev_raw_count;
delta = (new_raw_count - prev_raw_count) & armpmu->max_period;
local64_add(delta, &event->count);
local64_sub(delta, &hwc->period_left);
@ -216,7 +210,7 @@ armpmu_read(struct perf_event *event)
if (hwc->idx < 0)
return;
armpmu_event_update(event, hwc, hwc->idx, 0);
armpmu_event_update(event, hwc, hwc->idx);
}
static void
@ -232,7 +226,7 @@ armpmu_stop(struct perf_event *event, int flags)
if (!(hwc->state & PERF_HES_STOPPED)) {
armpmu->disable(hwc, hwc->idx);
barrier(); /* why? */
armpmu_event_update(event, hwc, hwc->idx, 0);
armpmu_event_update(event, hwc, hwc->idx);
hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
}
}
@ -518,7 +512,13 @@ __hw_perf_event_init(struct perf_event *event)
hwc->config_base |= (unsigned long)mapping;
if (!hwc->sample_period) {
hwc->sample_period = armpmu->max_period;
/*
* For non-sampling runs, limit the sample_period to half
* of the counter width. That way, the new counter value
* is far less likely to overtake the previous one unless
* you have some serious IRQ latency issues.
*/
hwc->sample_period = armpmu->max_period >> 1;
hwc->last_period = hwc->sample_period;
local64_set(&hwc->period_left, hwc->sample_period);
}
@ -679,6 +679,28 @@ static void __init cpu_pmu_init(struct arm_pmu *armpmu)
armpmu->type = ARM_PMU_DEVICE_CPU;
}
/*
* PMU hardware loses all context when a CPU goes offline.
* When a CPU is hotplugged back in, since some hardware registers are
* UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
* junk values out of them.
*/
static int __cpuinit pmu_cpu_notify(struct notifier_block *b,
unsigned long action, void *hcpu)
{
if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
return NOTIFY_DONE;
if (cpu_pmu && cpu_pmu->reset)
cpu_pmu->reset(NULL);
return NOTIFY_OK;
}
static struct notifier_block __cpuinitdata pmu_cpu_notifier = {
.notifier_call = pmu_cpu_notify,
};
/*
* CPU PMU identification and registration.
*/
@ -730,6 +752,7 @@ init_hw_perf_events(void)
pr_info("enabled with %s PMU driver, %d counters available\n",
cpu_pmu->name, cpu_pmu->num_events);
cpu_pmu_init(cpu_pmu);
register_cpu_notifier(&pmu_cpu_notifier);
armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW);
} else {
pr_info("no hardware support available\n");

22
arch/arm/kernel/perf_event_v6.c
View file

@ -467,23 +467,6 @@ armv6pmu_enable_event(struct hw_perf_event *hwc,
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static int counter_is_active(unsigned long pmcr, int idx)
{
unsigned long mask = 0;
if (idx == ARMV6_CYCLE_COUNTER)
mask = ARMV6_PMCR_CCOUNT_IEN;
else if (idx == ARMV6_COUNTER0)
mask = ARMV6_PMCR_COUNT0_IEN;
else if (idx == ARMV6_COUNTER1)
mask = ARMV6_PMCR_COUNT1_IEN;
if (mask)
return pmcr & mask;
WARN_ONCE(1, "invalid counter number (%d)\n", idx);
return 0;
}
static irqreturn_t
armv6pmu_handle_irq(int irq_num,
void *dev)
@ -513,7 +496,8 @@ armv6pmu_handle_irq(int irq_num,
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
if (!counter_is_active(pmcr, idx))
/* Ignore if we don't have an event. */
if (!event)
continue;
/*
@ -524,7 +508,7 @@ armv6pmu_handle_irq(int irq_num,
continue;
hwc = &event->hw;
armpmu_event_update(event, hwc, idx, 1);
armpmu_event_update(event, hwc, idx);
data.period = event->hw.last_period;
if (!armpmu_event_set_period(event, hwc, idx))
continue;

11
arch/arm/kernel/perf_event_v7.c
View file

@ -809,6 +809,11 @@ static inline int armv7_pmnc_disable_intens(int idx)
counter = ARMV7_IDX_TO_COUNTER(idx);
asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter)));
isb();
/* Clear the overflow flag in case an interrupt is pending. */
asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (BIT(counter)));
isb();
return idx;
}
@ -955,6 +960,10 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
/* Ignore if we don't have an event. */
if (!event)
continue;
/*
* We have a single interrupt for all counters. Check that
* each counter has overflowed before we process it.
@ -963,7 +972,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
continue;
hwc = &event->hw;
armpmu_event_update(event, hwc, idx, 1);
armpmu_event_update(event, hwc, idx);
data.period = event->hw.last_period;
if (!armpmu_event_set_period(event, hwc, idx))
continue;

20
arch/arm/kernel/perf_event_xscale.c
View file

@ -255,11 +255,14 @@ xscale1pmu_handle_irq(int irq_num, void *dev)
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
if (!event)
continue;
if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
continue;
hwc = &event->hw;
armpmu_event_update(event, hwc, idx, 1);
armpmu_event_update(event, hwc, idx);
data.period = event->hw.last_period;
if (!armpmu_event_set_period(event, hwc, idx))
continue;
@ -592,11 +595,14 @@ xscale2pmu_handle_irq(int irq_num, void *dev)
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
if (!event)
continue;
if (!xscale2_pmnc_counter_has_overflowed(of_flags, idx))
continue;
hwc = &event->hw;
armpmu_event_update(event, hwc, idx, 1);
armpmu_event_update(event, hwc, idx);
data.period = event->hw.last_period;
if (!armpmu_event_set_period(event, hwc, idx))
continue;
@ -663,7 +669,7 @@ xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
static void
xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long flags, ien, evtsel;
unsigned long flags, ien, evtsel, of_flags;
struct pmu_hw_events *events = cpu_pmu->get_hw_events();
ien = xscale2pmu_read_int_enable();
@ -672,26 +678,31 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
switch (idx) {
case XSCALE_CYCLE_COUNTER:
ien &= ~XSCALE2_CCOUNT_INT_EN;
of_flags = XSCALE2_CCOUNT_OVERFLOW;
break;
case XSCALE_COUNTER0:
ien &= ~XSCALE2_COUNT0_INT_EN;
evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
of_flags = XSCALE2_COUNT0_OVERFLOW;
break;
case XSCALE_COUNTER1:
ien &= ~XSCALE2_COUNT1_INT_EN;
evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
of_flags = XSCALE2_COUNT1_OVERFLOW;
break;
case XSCALE_COUNTER2:
ien &= ~XSCALE2_COUNT2_INT_EN;
evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
of_flags = XSCALE2_COUNT2_OVERFLOW;
break;
case XSCALE_COUNTER3:
ien &= ~XSCALE2_COUNT3_INT_EN;
evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
of_flags = XSCALE2_COUNT3_OVERFLOW;
break;
default:
WARN_ONCE(1, "invalid counter number (%d)\n", idx);
@ -701,6 +712,7 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
raw_spin_lock_irqsave(&events->pmu_lock, flags);
xscale2pmu_write_event_select(evtsel);
xscale2pmu_write_int_enable(ien);
xscale2pmu_write_overflow_flags(of_flags);
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}

9
arch/arm/kernel/ptrace.c
View file

@ -23,6 +23,7 @@
#include <linux/perf_event.h>
#include <linux/hw_breakpoint.h>
#include <linux/regset.h>
#include <linux/audit.h>
#include <asm/pgtable.h>
#include <asm/system.h>
@ -904,6 +905,12 @@ long arch_ptrace(struct task_struct *child, long request,
return ret;
}
#ifdef __ARMEB__
#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB
#else
#define AUDIT_ARCH_NR AUDIT_ARCH_ARM
#endif
asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
{
unsigned long ip;
@ -918,7 +925,7 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
if (!ip)
audit_syscall_exit(regs);
else
audit_syscall_entry(AUDIT_ARCH_ARMEB, scno, regs->ARM_r0,
audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0,
regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
if (!test_thread_flag(TIF_SYSCALL_TRACE))

2
arch/arm/kernel/smp_twd.c
View file

@ -129,7 +129,7 @@ static struct notifier_block twd_cpufreq_nb = {
static int twd_cpufreq_init(void)
{
if (!IS_ERR(twd_clk))
if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk))
return cpufreq_register_notifier(&twd_cpufreq_nb,
CPUFREQ_TRANSITION_NOTIFIER);

19
arch/arm/mach-at91/at91sam9g45_devices.c
View file

@ -38,10 +38,6 @@
#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
static u64 hdmac_dmamask = DMA_BIT_MASK(32);
static struct at_dma_platform_data atdma_pdata = {
.nr_channels = 8,
};
static struct resource hdmac_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_DMA,
@ -56,12 +52,11 @@ static struct resource hdmac_resources[] = {
};
static struct platform_device at_hdmac_device = {
.name = "at_hdmac",
.name = "at91sam9g45_dma",
.id = -1,
.dev = {
.dma_mask = &hdmac_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &atdma_pdata,
},
.resource = hdmac_resources,
.num_resources = ARRAY_SIZE(hdmac_resources),
@ -69,9 +64,15 @@ static struct platform_device at_hdmac_device = {
void __init at91_add_device_hdmac(void)
{
dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
platform_device_register(&at_hdmac_device);
#if defined(CONFIG_OF)
struct device_node *of_node =
of_find_node_by_name(NULL, "dma-controller");
if (of_node)
of_node_put(of_node);
else
#endif
platform_device_register(&at_hdmac_device);
}
#else
void __init at91_add_device_hdmac(void) {}

8
arch/arm/mach-at91/at91sam9rl_devices.c
View file

@ -33,10 +33,6 @@
#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
static u64 hdmac_dmamask = DMA_BIT_MASK(32);
static struct at_dma_platform_data atdma_pdata = {
.nr_channels = 2,
};
static struct resource hdmac_resources[] = {
[0] = {
.start = AT91SAM9RL_BASE_DMA,
@ -51,12 +47,11 @@ static struct resource hdmac_resources[] = {
};
static struct platform_device at_hdmac_device = {
.name = "at_hdmac",
.name = "at91sam9rl_dma",
.id = -1,
.dev = {
.dma_mask = &hdmac_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &atdma_pdata,
},
.resource = hdmac_resources,
.num_resources = ARRAY_SIZE(hdmac_resources),
@ -64,7 +59,6 @@ static struct platform_device at_hdmac_device = {
void __init at91_add_device_hdmac(void)
{
dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
platform_device_register(&at_hdmac_device);
}
#else

2
arch/arm/mach-ep93xx/vision_ep9307.c
View file

@ -34,6 +34,7 @@
#include <mach/ep93xx_spi.h>
#include <mach/gpio-ep93xx.h>
#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
@ -361,6 +362,7 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
.atag_offset = 0x100,
.map_io = vision_map_io,
.init_irq = ep93xx_init_irq,
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = vision_init_machine,
.restart = ep93xx_restart,

2
arch/arm/mach-exynos/mach-universal_c210.c
View file

@ -13,6 +13,7 @@
#include <linux/i2c.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/fb.h>
#include <linux/mfd/max8998.h>
#include <linux/regulator/machine.h>
@ -595,6 +596,7 @@ static struct mxt_platform_data qt602240_platform_data = {
.threshold = 0x28,
.voltage = 2800000, /* 2.8V */
.orient = MXT_DIAGONAL,
.irqflags = IRQF_TRIGGER_FALLING,
};
static struct i2c_board_info i2c3_devs[] __initdata = {

2
arch/arm/mach-lpc32xx/include/mach/irqs.h
View file

@ -61,7 +61,7 @@
*/
#define IRQ_LPC32XX_JTAG_COMM_TX LPC32XX_SIC1_IRQ(1)
#define IRQ_LPC32XX_JTAG_COMM_RX LPC32XX_SIC1_IRQ(2)
#define IRQ_LPC32XX_GPI_11 LPC32XX_SIC1_IRQ(4)
#define IRQ_LPC32XX_GPI_28 LPC32XX_SIC1_IRQ(4)
#define IRQ_LPC32XX_TS_P LPC32XX_SIC1_IRQ(6)
#define IRQ_LPC32XX_TS_IRQ LPC32XX_SIC1_IRQ(7)
#define IRQ_LPC32XX_TS_AUX LPC32XX_SIC1_IRQ(8)

25
arch/arm/mach-lpc32xx/irq.c
View file

@ -118,6 +118,10 @@ static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = {
.event_group = &lpc32xx_event_pin_regs,
.mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT,
},
[IRQ_LPC32XX_GPI_28] = {
.event_group = &lpc32xx_event_pin_regs,
.mask = LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT,
},
[IRQ_LPC32XX_GPIO_00] = {
.event_group = &lpc32xx_event_int_regs,
.mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT,
@ -305,9 +309,18 @@ static int lpc32xx_irq_wake(struct irq_data *d, unsigned int state)
if (state)
eventreg |= lpc32xx_events[d->irq].mask;
else
else {
eventreg &= ~lpc32xx_events[d->irq].mask;
/*
* When disabling the wakeup, clear the latched
* event
*/
__raw_writel(lpc32xx_events[d->irq].mask,
lpc32xx_events[d->irq].
event_group->rawstat_reg);
}
__raw_writel(eventreg,
lpc32xx_events[d->irq].event_group->enab_reg);
@ -380,13 +393,15 @@ void __init lpc32xx_init_irq(void)
/* Setup SIC1 */
__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE));
__raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
__raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
__raw_writel(SIC1_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
__raw_writel(SIC1_ATR_DEFAULT,
LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
/* Setup SIC2 */
__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE));
__raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
__raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
__raw_writel(SIC2_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
__raw_writel(SIC2_ATR_DEFAULT,
LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
/* Configure supported IRQ's */
for (i = 0; i < NR_IRQS; i++) {

20
arch/arm/mach-lpc32xx/serial.c
View file

@ -88,6 +88,7 @@ struct uartinit {
char *uart_ck_name;
u32 ck_mode_mask;
void __iomem *pdiv_clk_reg;
resource_size_t mapbase;
};
static struct uartinit uartinit_data[] __initdata = {
@ -97,6 +98,7 @@ static struct uartinit uartinit_data[] __initdata = {
.ck_mode_mask =
LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5),
.pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL,
.mapbase = LPC32XX_UART5_BASE,
},
#endif
#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
@ -105,6 +107,7 @@ static struct uartinit uartinit_data[] __initdata = {
.ck_mode_mask =
LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3),
.pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL,
.mapbase = LPC32XX_UART3_BASE,
},
#endif
#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
@ -113,6 +116,7 @@ static struct uartinit uartinit_data[] __initdata = {
.ck_mode_mask =
LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4),
.pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL,
.mapbase = LPC32XX_UART4_BASE,
},
#endif
#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
@ -121,6 +125,7 @@ static struct uartinit uartinit_data[] __initdata = {
.ck_mode_mask =
LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6),
.pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL,
.mapbase = LPC32XX_UART6_BASE,
},
#endif
};
@ -165,11 +170,24 @@ void __init lpc32xx_serial_init(void)
/* pre-UART clock divider set to 1 */
__raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg);
/*
* Force a flush of the RX FIFOs to work around a
* HW bug
*/
puart = uartinit_data[i].mapbase;
__raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
__raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart));
j = LPC32XX_SUART_FIFO_SIZE;
while (j--)
tmp = __raw_readl(
LPC32XX_UART_DLL_FIFO(puart));
__raw_writel(0, LPC32XX_UART_IIR_FCR(puart));
}
/* This needs to be done after all UART clocks are setup */
__raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE);
for (i = 0; i < ARRAY_SIZE(uartinit_data) - 1; i++) {
for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
/* Force a flush of the RX FIFOs to work around a HW bug */
puart = serial_std_platform_data[i].mapbase;
__raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));

1
arch/arm/mach-mmp/aspenite.c
View file

@ -17,7 +17,6 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>

1
arch/arm/mach-mmp/pxa168.c
View file

@ -24,7 +24,6 @@
#include <mach/dma.h>
#include <mach/devices.h>
#include <mach/mfp.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <mach/pxa168.h>

1
arch/arm/mach-mmp/tavorevb.c
View file

@ -12,7 +12,6 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/smc91x.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>

4
arch/arm/mach-omap1/board-innovator.c
View file

@ -416,13 +416,13 @@ static void __init innovator_init(void)
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
omap1_usb_init(&innovator1510_usb_config);
innovator_config[1].data = &innovator1510_lcd_config;
innovator_config[0].data = &innovator1510_lcd_config;
}
#endif
#ifdef CONFIG_ARCH_OMAP16XX
if (cpu_is_omap1610()) {
omap1_usb_init(&h2_usb_config);
innovator_config[1].data = &innovator1610_lcd_config;
innovator_config[0].data = &innovator1610_lcd_config;
}
#endif
omap_board_config = innovator_config;

4
arch/arm/mach-omap2/Kconfig
View file

@ -364,8 +364,8 @@ config OMAP3_SDRC_AC_TIMING
going on could result in system crashes;
config OMAP4_ERRATA_I688
bool "OMAP4 errata: Async Bridge Corruption (BROKEN)"
depends on ARCH_OMAP4 && BROKEN
bool "OMAP4 errata: Async Bridge Corruption"
depends on ARCH_OMAP4
select ARCH_HAS_BARRIERS
help
If a data is stalled inside asynchronous bridge because of back

4
arch/arm/mach-omap2/board-n8x0.c
View file

@ -371,7 +371,11 @@ static void n8x0_mmc_callback(void *data, u8 card_mask)
else
*openp = 0;
#ifdef CONFIG_MMC_OMAP
omap_mmc_notify_cover_event(mmc_device, index, *openp);
#else
pr_warn("MMC: notify cover event not available\n");
#endif
}
static int n8x0_mmc_late_init(struct device *dev)

2
arch/arm/mach-omap2/board-omap3evm.c
View file

@ -381,7 +381,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI");
/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1;
platform_device_register(&leds_gpio);

1
arch/arm/mach-omap2/common.h
View file

@ -132,6 +132,7 @@ void omap3_map_io(void);
void am33xx_map_io(void);
void omap4_map_io(void);
void ti81xx_map_io(void);
void omap_barriers_init(void);
/**
* omap_test_timeout - busy-loop, testing a condition

5
arch/arm/mach-omap2/cpuidle44xx.c
View file

@ -65,7 +65,6 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
struct timespec ts_preidle, ts_postidle, ts_idle;
u32 cpu1_state;
int idle_time;
int new_state_idx;
int cpu_id = smp_processor_id();
/* Used to keep track of the total time in idle */
@ -84,8 +83,8 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
*/
cpu1_state = pwrdm_read_pwrst(cpu1_pd);
if (cpu1_state != PWRDM_POWER_OFF) {
new_state_idx = drv->safe_state_index;
cx = cpuidle_get_statedata(&dev->states_usage[new_state_idx]);
index = drv->safe_state_index;
cx = cpuidle_get_statedata(&dev->states_usage[index]);
}
if (index > 0)

52
arch/arm/mach-omap2/gpmc-smsc911x.c
View file

@ -19,6 +19,8 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <plat/board.h>
#include <plat/gpmc.h>
@ -42,6 +44,50 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = {
.flags = SMSC911X_USE_16BIT,
};
static struct regulator_consumer_supply gpmc_smsc911x_supply[] = {
REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
};
/* Generic regulator definition to satisfy smsc911x */
static struct regulator_init_data gpmc_smsc911x_reg_init_data = {
.constraints = {
.min_uV = 3300000,
.max_uV = 3300000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(gpmc_smsc911x_supply),
.consumer_supplies = gpmc_smsc911x_supply,
};
static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = {
.supply_name = "gpmc_smsc911x",
.microvolts = 3300000,
.gpio = -EINVAL,
.startup_delay = 0,
.enable_high = 0,
.enabled_at_boot = 1,
.init_data = &gpmc_smsc911x_reg_init_data,
};
/*
* Platform device id of 42 is a temporary fix to avoid conflicts
* with other reg-fixed-voltage devices. The real fix should
* involve the driver core providing a way of dynamically
* assigning a unique id on registration for platform devices
* in the same name space.
*/
static struct platform_device gpmc_smsc911x_regulator = {
.name = "reg-fixed-voltage",
.id = 42,
.dev = {
.platform_data = &gpmc_smsc911x_fixed_reg_data,
},
};
/*
* Initialize smsc911x device connected to the GPMC. Note that we
* assume that pin multiplexing is done in the board-*.c file,
@ -55,6 +101,12 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
gpmc_cfg = board_data;
ret = platform_device_register(&gpmc_smsc911x_regulator);
if (ret < 0) {
pr_err("Unable to register smsc911x regulators: %d\n", ret);
return;
}
if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
pr_err("Failed to request GPMC mem region\n");
return;

6
arch/arm/mach-omap2/hsmmc.c
View file

@ -428,6 +428,7 @@ static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
return 0;
}
static int omap_hsmmc_done;
#define MAX_OMAP_MMC_HWMOD_NAME_LEN 16
void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
@ -491,6 +492,11 @@ void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
{
u32 reg;
if (omap_hsmmc_done)
return;
omap_hsmmc_done = 1;
if (!cpu_is_omap44xx()) {
if (cpu_is_omap2430()) {
control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;

1
arch/arm/mach-omap2/id.c
View file

@ -343,6 +343,7 @@ static void __init omap3_check_revision(const char **cpu_rev)
case 0xb944:
omap_revision = AM335X_REV_ES1_0;
*cpu_rev = "1.0";
break;
case 0xb8f2:
switch (rev) {
case 0:

1
arch/arm/mach-omap2/io.c
View file

@ -307,6 +307,7 @@ void __init omapam33xx_map_common_io(void)
void __init omap44xx_map_common_io(void)
{
iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
omap_barriers_init();
}
#endif

10
arch/arm/mach-omap2/mailbox.c
View file

@ -281,8 +281,16 @@ static struct omap_mbox mbox_iva_info = {
.ops = &omap2_mbox_ops,
.priv = &omap2_mbox_iva_priv,
};
#endif
struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL };
#ifdef CONFIG_ARCH_OMAP2
struct omap_mbox *omap2_mboxes[] = {
&mbox_dsp_info,
#ifdef CONFIG_SOC_OMAP2420
&mbox_iva_info,
#endif
NULL
};
#endif
#if defined(CONFIG_ARCH_OMAP4)

2
arch/arm/mach-omap2/mux.c
View file

@ -218,7 +218,7 @@ static int _omap_mux_get_by_name(struct omap_mux_partition *partition,
return -ENODEV;
}
static int __init
static int
omap_mux_get_by_name(const char *muxname,
struct omap_mux_partition **found_partition,
struct omap_mux **found_mux)

3
arch/arm/mach-omap2/omap-iommu.c
View file

@ -150,7 +150,8 @@ static int __init omap_iommu_init(void)
platform_device_put(omap_iommu_pdev[i]);
return err;
}
module_init(omap_iommu_init);
/* must be ready before omap3isp is probed */
subsys_initcall(omap_iommu_init);
static void __exit omap_iommu_exit(void)
{

27
arch/arm/mach-omap2/omap4-common.c
View file

@ -24,12 +24,14 @@
#include <plat/irqs.h>
#include <plat/sram.h>
#include <plat/omap-secure.h>
#include <mach/hardware.h>
#include <mach/omap-wakeupgen.h>
#include "common.h"
#include "omap4-sar-layout.h"
#include <linux/export.h>
#ifdef CONFIG_CACHE_L2X0
static void __iomem *l2cache_base;
@ -43,6 +45,9 @@ static void __iomem *sar_ram_base;
void __iomem *dram_sync, *sram_sync;
static phys_addr_t paddr;
static u32 size;
void omap_bus_sync(void)
{
if (dram_sync && sram_sync) {
@ -51,19 +56,22 @@ void omap_bus_sync(void)
isb();
}
}
EXPORT_SYMBOL(omap_bus_sync);
static int __init omap_barriers_init(void)
/* Steal one page physical memory for barrier implementation */
int __init omap_barrier_reserve_memblock(void)
{
struct map_desc dram_io_desc[1];
phys_addr_t paddr;
u32 size;
if (!cpu_is_omap44xx())
return -ENODEV;
size = ALIGN(PAGE_SIZE, SZ_1M);
paddr = arm_memblock_steal(size, SZ_1M);
return 0;
}
void __init omap_barriers_init(void)
{
struct map_desc dram_io_desc[1];
dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA;
dram_io_desc[0].pfn = __phys_to_pfn(paddr);
dram_io_desc[0].length = size;
@ -75,9 +83,10 @@ static int __init omap_barriers_init(void)
pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n",
(long long) paddr, dram_io_desc[0].virtual);
return 0;
}
core_initcall(omap_barriers_init);
#else
void __init omap_barriers_init(void)
{}
#endif
void __init gic_init_irq(void)

3
arch/arm/mach-omap2/pm.c
View file

@ -174,14 +174,17 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
freq = clk->rate;
clk_put(clk);
rcu_read_lock();
opp = opp_find_freq_ceil(dev, &freq);
if (IS_ERR(opp)) {
rcu_read_unlock();
pr_err("%s: unable to find boot up OPP for vdd_%s\n",
__func__, vdd_name);
goto exit;
}
bootup_volt = opp_get_voltage(opp);
rcu_read_unlock();
if (!bootup_volt) {
pr_err("%s: unable to find voltage corresponding "
"to the bootup OPP for vdd_%s\n", __func__, vdd_name);

1
arch/arm/mach-omap2/twl-common.c
View file

@ -270,7 +270,6 @@ static struct regulator_init_data omap4_vusb_idata = {
.constraints = {
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE

6
arch/arm/mach-omap2/usb-host.c
View file

@ -486,7 +486,7 @@ static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
{
struct omap_hwmod *oh[2];
struct omap_device *od;
struct platform_device *pdev;
int bus_id = -1;
int i;
@ -522,11 +522,11 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
return;
}
od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
(void *)&usbhs_data, sizeof(usbhs_data),
omap_uhhtll_latency,
ARRAY_SIZE(omap_uhhtll_latency), false);
if (IS_ERR(od)) {
if (IS_ERR(pdev)) {
pr_err("Could not build hwmod devices %s,%s\n",
USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME);
return;

2
arch/arm/mach-omap2/voltagedomains3xxx_data.c
View file

@ -108,6 +108,7 @@ void __init omap3xxx_voltagedomains_init(void)
* XXX Will depend on the process, validation, and binning
* for the currently-running IC
*/
#ifdef CONFIG_PM_OPP
if (cpu_is_omap3630()) {
omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data;
omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data;
@ -115,6 +116,7 @@ void __init omap3xxx_voltagedomains_init(void)
omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data;
omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data;
}
#endif
if (cpu_is_omap3517() || cpu_is_omap3505())
voltdms = voltagedomains_am35xx;

2
arch/arm/mach-omap2/voltagedomains44xx_data.c
View file

@ -100,9 +100,11 @@ void __init omap44xx_voltagedomains_init(void)
* XXX Will depend on the process, validation, and binning
* for the currently-running IC
*/
#ifdef CONFIG_PM_OPP
omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data;
omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data;
omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data;
#endif
for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++)
voltdm->sys_clk.name = sys_clk_name;

1
arch/arm/mach-pxa/generic.h
View file

@ -49,7 +49,6 @@ extern unsigned pxa3xx_get_clk_frequency_khz(int);
#endif
extern struct syscore_ops pxa_irq_syscore_ops;
extern struct syscore_ops pxa_gpio_syscore_ops;
extern struct syscore_ops pxa2xx_mfp_syscore_ops;
extern struct syscore_ops pxa3xx_mfp_syscore_ops;

25
arch/arm/mach-pxa/hx4700.c
View file

@ -45,6 +45,7 @@
#include <mach/hx4700.h>
#include <mach/irda.h>
#include <sound/ak4641.h>
#include <video/platform_lcd.h>
#include <video/w100fb.h>
@ -764,6 +765,28 @@ static struct i2c_board_info __initdata pi2c_board_info[] = {
},
};
/*
* Asahi Kasei AK4641 on I2C
*/
static struct ak4641_platform_data ak4641_info = {
.gpio_power = GPIO27_HX4700_CODEC_ON,
.gpio_npdn = GPIO109_HX4700_CODEC_nPDN,
};
static struct i2c_board_info i2c_board_info[] __initdata = {
{
I2C_BOARD_INFO("ak4641", 0x12),
.platform_data = &ak4641_info,
},
};
static struct platform_device audio = {
.name = "hx4700-audio",
.id = -1,
};
/*
* PCMCIA
*/
@ -790,6 +813,7 @@ static struct platform_device *devices[] __initdata = {
&gpio_vbus,
&power_supply,
&strataflash,
&audio,
&pcmcia,
};
@ -827,6 +851,7 @@ static void __init hx4700_init(void)
pxa_set_ficp_info(&ficp_info);
pxa27x_set_i2c_power_info(NULL);
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info));
i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));

7
arch/arm/mach-pxa/mfp-pxa2xx.c
View file

@ -226,6 +226,12 @@ static void __init pxa25x_mfp_init(void)
{
int i;
/* running before pxa_gpio_probe() */
#ifdef CONFIG_CPU_PXA26x
pxa_last_gpio = 89;
#else
pxa_last_gpio = 84;
#endif
for (i = 0; i <= pxa_last_gpio; i++)
gpio_desc[i].valid = 1;
@ -295,6 +301,7 @@ static void __init pxa27x_mfp_init(void)
{
int i, gpio;
pxa_last_gpio = 120; /* running before pxa_gpio_probe() */
for (i = 0; i <= pxa_last_gpio; i++) {
/* skip GPIO2, 5, 6, 7, 8, they are not
* valid pins allow configuration

3
arch/arm/mach-pxa/pxa25x.c
View file

@ -25,7 +25,6 @@
#include <linux/suspend.h>
#include <linux/syscore_ops.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <asm/mach/map.h>
#include <asm/suspend.h>
@ -209,6 +208,7 @@ static struct clk_lookup pxa25x_clkregs[] = {
INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
};
static struct clk_lookup pxa25x_hwuart_clkreg =
@ -368,7 +368,6 @@ static int __init pxa25x_init(void)
register_syscore_ops(&pxa_irq_syscore_ops);
register_syscore_ops(&pxa2xx_mfp_syscore_ops);
register_syscore_ops(&pxa_gpio_syscore_ops);
register_syscore_ops(&pxa2xx_clock_syscore_ops);
ret = platform_add_devices(pxa25x_devices,

3
arch/arm/mach-pxa/pxa27x.c
View file

@ -22,7 +22,6 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/gpio.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
@ -230,6 +229,7 @@ static struct clk_lookup pxa27x_clkregs[] = {
INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
};
#ifdef CONFIG_PM
@ -456,7 +456,6 @@ static int __init pxa27x_init(void)
register_syscore_ops(&pxa_irq_syscore_ops);
register_syscore_ops(&pxa2xx_mfp_syscore_ops);
register_syscore_ops(&pxa_gpio_syscore_ops);
register_syscore_ops(&pxa2xx_clock_syscore_ops);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));

1
arch/arm/mach-pxa/pxa3xx.c
View file

@ -462,7 +462,6 @@ static int __init pxa3xx_init(void)
register_syscore_ops(&pxa_irq_syscore_ops);
register_syscore_ops(&pxa3xx_mfp_syscore_ops);
register_syscore_ops(&pxa_gpio_syscore_ops);
register_syscore_ops(&pxa3xx_clock_syscore_ops);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));

1
arch/arm/mach-pxa/pxa95x.c
View file

@ -283,7 +283,6 @@ static int __init pxa95x_init(void)
return ret;
register_syscore_ops(&pxa_irq_syscore_ops);
register_syscore_ops(&pxa_gpio_syscore_ops);
register_syscore_ops(&pxa3xx_clock_syscore_ops);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));

1
arch/arm/mach-pxa/saarb.c
View file

@ -15,7 +15,6 @@
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/mfd/88pm860x.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>

3
arch/arm/mach-pxa/sharpsl_pm.c
View file

@ -168,6 +168,7 @@ struct battery_thresh sharpsl_battery_levels_noac[] = {
#define MAXCTRL_SEL_SH 4
#define MAXCTRL_STR (1u << 7)
extern int max1111_read_channel(int);
/*
* Read MAX1111 ADC
*/
@ -177,8 +178,6 @@ int sharpsl_pm_pxa_read_max1111(int channel)
if (machine_is_tosa())
return 0;
extern int max1111_read_channel(int);
/* max1111 accepts channels from 0-3, however,
* it is encoded from 0-7 here in the code.
*/

5
arch/arm/mach-pxa/spitz_pm.c
View file

@ -172,10 +172,9 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm)
static unsigned long spitz_charger_wakeup(void)
{
unsigned long ret;
ret = (!gpio_get_value(SPITZ_GPIO_KEY_INT)
ret = ((!gpio_get_value(SPITZ_GPIO_KEY_INT)
<< GPIO_bit(SPITZ_GPIO_KEY_INT))
| (!gpio_get_value(SPITZ_GPIO_SYNC)
<< GPIO_bit(SPITZ_GPIO_SYNC));
| gpio_get_value(SPITZ_GPIO_SYNC));
return ret;
}

2
arch/arm/mach-s3c2440/common.h
View file

@ -12,6 +12,6 @@
#ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H
#define __ARCH_ARM_MACH_S3C2440_COMMON_H
void s3c2440_restart(char mode, const char *cmd);
void s3c244x_restart(char mode, const char *cmd);
#endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */

2
arch/arm/mach-s3c2440/mach-anubis.c
View file

@ -487,5 +487,5 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
.init_machine = anubis_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
.restart = s3c2440_restart,
.restart = s3c244x_restart,
MACHINE_END

2
arch/arm/mach-s3c2440/mach-at2440evb.c
View file

@ -222,5 +222,5 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
.init_machine = at2440evb_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
.restart = s3c2440_restart,
.restart = s3c244x_restart,
MACHINE_END

2
arch/arm/mach-s3c2440/mach-gta02.c
View file

@ -601,5 +601,5 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
.init_irq = s3c24xx_init_irq,
.init_machine = gta02_machine_init,
.timer = &s3c24xx_timer,
.restart = s3c2440_restart,
.restart = s3c244x_restart,
MACHINE_END

2
arch/arm/mach-s3c2440/mach-mini2440.c
View file

@ -701,5 +701,5 @@ MACHINE_START(MINI2440, "MINI2440")
.init_machine = mini2440_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
.restart = s3c2440_restart,
.restart = s3c244x_restart,
MACHINE_END

2
arch/arm/mach-s3c2440/mach-nexcoder.c
View file

@ -158,5 +158,5 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
.init_machine = nexcoder_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
.restart = s3c2440_restart,
.restart = s3c244x_restart,
MACHINE_END

2
arch/arm/mach-s3c2440/mach-osiris.c
View file

@ -436,5 +436,5 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
.init_irq = s3c24xx_init_irq,
.init_machine = osiris_init,
.timer = &s3c24xx_timer,
.restart = s3c2440_restart,
.restart = s3c244x_restart,
MACHINE_END

2
arch/arm/mach-s3c2440/mach-rx1950.c
View file

@ -822,5 +822,5 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
.init_irq = s3c24xx_init_irq,
.init_machine = rx1950_init_machine,
.timer = &s3c24xx_timer,
.restart = s3c2440_restart,
.restart = s3c244x_restart,
MACHINE_END

2
arch/arm/mach-s3c2440/mach-rx3715.c
View file

@ -213,5 +213,5 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
.init_irq = rx3715_init_irq,
.init_machine = rx3715_init_machine,
.timer = &s3c24xx_timer,
.restart = s3c2440_restart,
.restart = s3c244x_restart,
MACHINE_END

2
arch/arm/mach-s3c2440/mach-smdk2440.c
View file

@ -183,5 +183,5 @@ MACHINE_START(S3C2440, "SMDK2440")
.map_io = smdk2440_map_io,
.init_machine = smdk2440_machine_init,
.timer = &s3c24xx_timer,
.restart = s3c2440_restart,
.restart = s3c244x_restart,
MACHINE_END

13
arch/arm/mach-s3c2440/s3c2440.c
View file

@ -35,7 +35,6 @@
#include <plat/cpu.h>
#include <plat/s3c244x.h>
#include <plat/pm.h>
#include <plat/watchdog-reset.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
@ -74,15 +73,3 @@ void __init s3c2440_map_io(void)
s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
}
void s3c2440_restart(char mode, const char *cmd)
{
if (mode == 's') {
soft_restart(0);
}
arch_wdt_reset();
/* we'll take a jump through zero as a poor second */
soft_restart(0);
}

12
arch/arm/mach-s3c2440/s3c244x.c
View file

@ -46,6 +46,7 @@
#include <plat/pm.h>
#include <plat/pll.h>
#include <plat/nand-core.h>
#include <plat/watchdog-reset.h>
static struct map_desc s3c244x_iodesc[] __initdata = {
IODESC_ENT(CLKPWR),
@ -196,3 +197,14 @@ struct syscore_ops s3c244x_pm_syscore_ops = {
.suspend = s3c244x_suspend,
.resume = s3c244x_resume,
};
void s3c244x_restart(char mode, const char *cmd)
{
if (mode == 's')
soft_restart(0);
arch_wdt_reset();
/* we'll take a jump through zero as a poor second */
soft_restart(0);
}

29
arch/arm/mach-shmobile/board-ag5evm.c
View file

@ -30,6 +30,7 @@
#include <linux/serial_sci.h>
#include <linux/smsc911x.h>
#include <linux/gpio.h>
#include <linux/videodev2.h>
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
#include <linux/mmc/host.h>
@ -37,7 +38,6 @@
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/sh_clk.h>
#include <linux/dma-mapping.h>
#include <video/sh_mobile_lcdc.h>
#include <video/sh_mipi_dsi.h>
#include <sound/sh_fsi.h>
@ -159,19 +159,12 @@ static struct resource sh_mmcif_resources[] = {
},
};
static struct sh_mmcif_dma sh_mmcif_dma = {
.chan_priv_rx = {
.slave_id = SHDMA_SLAVE_MMCIF_RX,
},
.chan_priv_tx = {
.slave_id = SHDMA_SLAVE_MMCIF_TX,
},
};
static struct sh_mmcif_plat_data sh_mmcif_platdata = {
.sup_pclk = 0,
.ocr = MMC_VDD_165_195,
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
.dma = &sh_mmcif_dma,
.slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
.slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
static struct platform_device mmc_device = {
@ -321,12 +314,11 @@ static struct resource mipidsi0_resources[] = {
},
};
#define DSI0PHYCR 0xe615006c
static int sh_mipi_set_dot_clock(struct platform_device *pdev,
void __iomem *base,
int enable)
{
struct clk *pck;
struct clk *pck, *phy;
int ret;
pck = clk_get(&pdev->dev, "dsip_clk");
@ -335,18 +327,27 @@ static int sh_mipi_set_dot_clock(struct platform_device *pdev,
goto sh_mipi_set_dot_clock_pck_err;
}
phy = clk_get(&pdev->dev, "dsiphy_clk");
if (IS_ERR(phy)) {
ret = PTR_ERR(phy);
goto sh_mipi_set_dot_clock_phy_err;
}
if (enable) {
clk_set_rate(pck, clk_round_rate(pck, 24000000));
__raw_writel(0x2a809010, DSI0PHYCR);
clk_set_rate(phy, clk_round_rate(pck, 510000000));
clk_enable(pck);
clk_enable(phy);
} else {
clk_disable(pck);
clk_disable(phy);
}
ret = 0;
clk_put(phy);
sh_mipi_set_dot_clock_phy_err:
clk_put(pck);
sh_mipi_set_dot_clock_pck_err:
return ret;
}

12
arch/arm/mach-shmobile/board-ap4evb.c
View file

@ -295,15 +295,6 @@ static struct resource sh_mmcif_resources[] = {
},
};
static struct sh_mmcif_dma sh_mmcif_dma = {
.chan_priv_rx = {
.slave_id = SHDMA_SLAVE_MMCIF_RX,
},
.chan_priv_tx = {
.slave_id = SHDMA_SLAVE_MMCIF_TX,
},
};
static struct sh_mmcif_plat_data sh_mmcif_plat = {
.sup_pclk = 0,
.ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
@ -311,7 +302,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = {
MMC_CAP_8_BIT_DATA |
MMC_CAP_NEEDS_POLL,
.get_cd = slot_cn7_get_cd,
.dma = &sh_mmcif_dma,
.slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
.slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
static struct platform_device sh_mmcif_device = {

3
arch/arm/mach-shmobile/board-kota2.c
View file

@ -143,11 +143,10 @@ static struct gpio_keys_button gpio_buttons[] = {
static struct gpio_keys_platform_data gpio_key_info = {
.buttons = gpio_buttons,
.nbuttons = ARRAY_SIZE(gpio_buttons),
.poll_interval = 250, /* polled for now */
};
static struct platform_device gpio_keys_device = {
.name = "gpio-keys-polled", /* polled for now */
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &gpio_key_info,

95
arch/arm/mach-shmobile/board-mackerel.c
View file

@ -43,7 +43,6 @@
#include <linux/smsc911x.h>
#include <linux/sh_intc.h>
#include <linux/tca6416_keypad.h>
#include <linux/usb/r8a66597.h>
#include <linux/usb/renesas_usbhs.h>
#include <linux/dma-mapping.h>
@ -145,11 +144,6 @@
* 1-2 short | VBUS 5V | Host
* open | external VBUS | Function
*
* *1
* CN31 is used as
* CONFIG_USB_R8A66597_HCD Host
* CONFIG_USB_RENESAS_USBHS Function
*
* CAUTION
*
* renesas_usbhs driver can use external interrupt mode
@ -161,15 +155,6 @@
* mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0",
* because Touchscreen is using IRQ7-PORT40.
* It is impossible to use IRQ7 demux on this board.
*
* We can use external interrupt mode USB-Function on "USB1".
* USB1 can become Host by r8a66597, and become Function by renesas_usbhs.
* But don't select both drivers in same time.
* These uses same IRQ number for request_irq(), and aren't supporting
* IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE.
*
* Actually these are old/new version of USB driver.
* This mean its register will be broken if it supports shared IRQ,
*/
/*
@ -207,6 +192,16 @@
*
*/
/*
* FSI - AK4642
*
* it needs amixer settings for playing
*
* amixer set "Headphone" on
* amixer set "HPOUTL Mixer DACH" on
* amixer set "HPOUTR Mixer DACH" on
*/
/*
* FIXME !!
*
@ -676,51 +671,16 @@ static struct platform_device usbhs0_device = {
* Use J30 to select between Host and Function. This setting
* can however not be detected by software. Hotplug of USBHS1
* is provided via IRQ8.
*
* Current USB1 works as "USB Host".
* - set J30 "short"
*
* If you want to use it as "USB gadget",
* - J30 "open"
* - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
* - add .get_vbus = usbhs_get_vbus in usbhs1_private
*/
#define IRQ8 evt2irq(0x0300)
/* USBHS1 USB Host support via r8a66597_hcd */
static void usb1_host_port_power(int port, int power)
{
if (!power) /* only power-on is supported for now */
return;
/* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
__raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008);
}
static struct r8a66597_platdata usb1_host_data = {
.on_chip = 1,
.port_power = usb1_host_port_power,
};
static struct resource usb1_host_resources[] = {
[0] = {
.name = "USBHS1",
.start = 0xe68b0000,
.end = 0xe68b00e6 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = evt2irq(0x1ce0) /* USB1_USB1I0 */,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device usb1_host_device = {
.name = "r8a66597_hcd",
.id = 1,
.dev = {
.dma_mask = NULL, /* not use dma */
.coherent_dma_mask = 0xffffffff,
.platform_data = &usb1_host_data,
},
.num_resources = ARRAY_SIZE(usb1_host_resources),
.resource = usb1_host_resources,
};
/* USBHS1 USB Function support via renesas_usbhs */
#define USB_PHY_MODE (1 << 4)
#define USB_PHY_INT_EN ((1 << 3) | (1 << 2))
#define USB_PHY_ON (1 << 1)
@ -776,7 +736,7 @@ static void usbhs1_hardware_exit(struct platform_device *pdev)
static int usbhs1_get_id(struct platform_device *pdev)
{
return USBHS_GADGET;
return USBHS_HOST;
}
static u32 usbhs1_pipe_cfg[] = {
@ -807,7 +767,6 @@ static struct usbhs_private usbhs1_private = {
.hardware_exit = usbhs1_hardware_exit,
.get_id = usbhs1_get_id,
.phy_reset = usbhs_phy_reset,
.get_vbus = usbhs_get_vbus,
},
.driver_param = {
.buswait_bwait = 4,
@ -1184,15 +1143,6 @@ static struct resource sh_mmcif_resources[] = {
},
};
static struct sh_mmcif_dma sh_mmcif_dma = {
.chan_priv_rx = {
.slave_id = SHDMA_SLAVE_MMCIF_RX,
},
.chan_priv_tx = {
.slave_id = SHDMA_SLAVE_MMCIF_TX,
},
};
static struct sh_mmcif_plat_data sh_mmcif_plat = {
.sup_pclk = 0,
.ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
@ -1200,7 +1150,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = {
MMC_CAP_8_BIT_DATA |
MMC_CAP_NEEDS_POLL,
.get_cd = slot_cn7_get_cd,
.dma = &sh_mmcif_dma,
.slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
.slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
static struct platform_device sh_mmcif_device = {
@ -1311,7 +1262,6 @@ static struct platform_device *mackerel_devices[] __initdata = {
&nor_flash_device,
&smc911x_device,
&lcdc_device,
&usb1_host_device,
&usbhs1_device,
&usbhs0_device,
&leds_device,
@ -1473,9 +1423,6 @@ static void __init mackerel_init(void)
gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
gpio_request(GPIO_FN_IDIN_1_113, NULL);
/* USB phy tweak to make the r8a66597_hcd host driver work */
__raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */
/* enable FSI2 port A (ak4643) */
gpio_request(GPIO_FN_FSIAIBT, NULL);
gpio_request(GPIO_FN_FSIAILR, NULL);

113
arch/arm/mach-shmobile/clock-sh73a0.c
View file

@ -365,6 +365,114 @@ static struct clk div6_clks[DIV6_NR] = {
dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3),
};
/* DSI DIV */
static unsigned long dsiphy_recalc(struct clk *clk)
{
u32 value;
value = __raw_readl(clk->mapping->base);
/* FIXME */
if (!(value & 0x000B8000))
return clk->parent->rate;
value &= 0x3f;
value += 1;
if ((value < 12) ||
(value > 33)) {
pr_err("DSIPHY has wrong value (%d)", value);
return 0;
}
return clk->parent->rate / value;
}
static long dsiphy_round_rate(struct clk *clk, unsigned long rate)
{
return clk_rate_mult_range_round(clk, 12, 33, rate);
}
static void dsiphy_disable(struct clk *clk)
{
u32 value;
value = __raw_readl(clk->mapping->base);
value &= ~0x000B8000;
__raw_writel(value , clk->mapping->base);
}
static int dsiphy_enable(struct clk *clk)
{
u32 value;
int multi;
value = __raw_readl(clk->mapping->base);
multi = (value & 0x3f) + 1;
if ((multi < 12) || (multi > 33))
return -EIO;
__raw_writel(value | 0x000B8000, clk->mapping->base);
return 0;
}
static int dsiphy_set_rate(struct clk *clk, unsigned long rate)
{
u32 value;
int idx;
idx = rate / clk->parent->rate;
if ((idx < 12) || (idx > 33))
return -EINVAL;
idx += -1;
value = __raw_readl(clk->mapping->base);
value = (value & ~0x3f) + idx;
__raw_writel(value, clk->mapping->base);
return 0;
}
static struct clk_ops dsiphy_clk_ops = {
.recalc = dsiphy_recalc,
.round_rate = dsiphy_round_rate,
.set_rate = dsiphy_set_rate,
.enable = dsiphy_enable,
.disable = dsiphy_disable,
};
static struct clk_mapping dsi0phy_clk_mapping = {
.phys = DSI0PHYCR,
.len = 4,
};
static struct clk_mapping dsi1phy_clk_mapping = {
.phys = DSI1PHYCR,
.len = 4,
};
static struct clk dsi0phy_clk = {
.ops = &dsiphy_clk_ops,
.parent = &div6_clks[DIV6_DSI0P], /* late install */
.mapping = &dsi0phy_clk_mapping,
};
static struct clk dsi1phy_clk = {
.ops = &dsiphy_clk_ops,
.parent = &div6_clks[DIV6_DSI1P], /* late install */
.mapping = &dsi1phy_clk_mapping,
};
static struct clk *late_main_clks[] = {
&dsi0phy_clk,
&dsi1phy_clk,
};
enum { MSTP001,
MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
MSTP219,
@ -429,6 +537,8 @@ static struct clk_lookup lookups[] = {
CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk),
CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk),
/* MSTP32 clocks */
CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
@ -504,6 +614,9 @@ void __init sh73a0_clock_init(void)
if (!ret)
ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
ret = clk_register(late_main_clks[k]);
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
if (!ret)

6
arch/arm/mach-shmobile/include/mach/sh73a0.h
View file

@ -515,8 +515,8 @@ enum {
SHDMA_SLAVE_MMCIF_RX,
};
/* PINT interrupts are located at Linux IRQ 768 and up */
#define SH73A0_PINT0_IRQ(irq) ((irq) + 768)
#define SH73A0_PINT1_IRQ(irq) ((irq) + 800)
/* PINT interrupts are located at Linux IRQ 800 and up */
#define SH73A0_PINT0_IRQ(irq) ((irq) + 800)
#define SH73A0_PINT1_IRQ(irq) ((irq) + 832)
#endif /* __ASM_SH73A0_H__ */

2
arch/arm/mach-shmobile/intc-sh73a0.c
View file

@ -19,6 +19,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/sh_intc.h>
@ -445,6 +446,7 @@ void __init sh73a0_init_irq(void)
setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]);
n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k)));
WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n);
irq_set_chip_and_handler_name(n, &intca_gic_irq_chip,
handle_level_irq, "level");
set_irq_flags(n, IRQF_VALID); /* yuck */

2
arch/arm/mach-shmobile/pfc-r8a7779.c
View file

@ -2120,7 +2120,7 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = {
FN_AUDATA3, 0, 0, 0 }
},
{ PINMUX_CFG_REG_VAR("IPSR4", 0xfffc0030, 32,
3, 1, 1, 1, 1, 1, 1, 3, 3, 1,
3, 1, 1, 1, 1, 1, 1, 3, 3,
1, 1, 1, 1, 1, 1, 3, 3, 3, 2) {
/* IP4_31_29 [3] */
FN_DU1_DB0, FN_VI2_DATA4_VI2_B4, FN_SCL2_B, FN_SD3_DAT0,

41
arch/arm/mach-shmobile/pfc-sh7372.c
View file

@ -23,6 +23,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <mach/irqs.h>
#include <mach/sh7372.h>
#define CPU_ALL_PORT(fn, pfx, sfx) \
@ -1594,6 +1595,43 @@ static struct pinmux_data_reg pinmux_data_regs[] = {
{ },
};
#define EXT_IRQ16L(n) evt2irq(0x200 + ((n) << 5))
#define EXT_IRQ16H(n) evt2irq(0x3200 + (((n) - 16) << 5))
static struct pinmux_irq pinmux_irqs[] = {
PINMUX_IRQ(EXT_IRQ16L(0), PORT6_FN0, PORT162_FN0),
PINMUX_IRQ(EXT_IRQ16L(1), PORT12_FN0),
PINMUX_IRQ(EXT_IRQ16L(2), PORT4_FN0, PORT5_FN0),
PINMUX_IRQ(EXT_IRQ16L(3), PORT8_FN0, PORT16_FN0),
PINMUX_IRQ(EXT_IRQ16L(4), PORT17_FN0, PORT163_FN0),
PINMUX_IRQ(EXT_IRQ16L(5), PORT18_FN0),
PINMUX_IRQ(EXT_IRQ16L(6), PORT39_FN0, PORT164_FN0),
PINMUX_IRQ(EXT_IRQ16L(7), PORT40_FN0, PORT167_FN0),
PINMUX_IRQ(EXT_IRQ16L(8), PORT41_FN0, PORT168_FN0),
PINMUX_IRQ(EXT_IRQ16L(9), PORT42_FN0, PORT169_FN0),
PINMUX_IRQ(EXT_IRQ16L(10), PORT65_FN0),
PINMUX_IRQ(EXT_IRQ16L(11), PORT67_FN0),
PINMUX_IRQ(EXT_IRQ16L(12), PORT80_FN0, PORT137_FN0),
PINMUX_IRQ(EXT_IRQ16L(13), PORT81_FN0, PORT145_FN0),
PINMUX_IRQ(EXT_IRQ16L(14), PORT82_FN0, PORT146_FN0),
PINMUX_IRQ(EXT_IRQ16L(15), PORT83_FN0, PORT147_FN0),
PINMUX_IRQ(EXT_IRQ16H(16), PORT84_FN0, PORT170_FN0),
PINMUX_IRQ(EXT_IRQ16H(17), PORT85_FN0),
PINMUX_IRQ(EXT_IRQ16H(18), PORT86_FN0),
PINMUX_IRQ(EXT_IRQ16H(19), PORT87_FN0),
PINMUX_IRQ(EXT_IRQ16H(20), PORT92_FN0),
PINMUX_IRQ(EXT_IRQ16H(21), PORT93_FN0),
PINMUX_IRQ(EXT_IRQ16H(22), PORT94_FN0),
PINMUX_IRQ(EXT_IRQ16H(23), PORT95_FN0),
PINMUX_IRQ(EXT_IRQ16H(24), PORT112_FN0),
PINMUX_IRQ(EXT_IRQ16H(25), PORT119_FN0),
PINMUX_IRQ(EXT_IRQ16H(26), PORT121_FN0, PORT172_FN0),
PINMUX_IRQ(EXT_IRQ16H(27), PORT122_FN0, PORT180_FN0),
PINMUX_IRQ(EXT_IRQ16H(28), PORT123_FN0, PORT181_FN0),
PINMUX_IRQ(EXT_IRQ16H(29), PORT129_FN0, PORT182_FN0),
PINMUX_IRQ(EXT_IRQ16H(30), PORT130_FN0, PORT183_FN0),
PINMUX_IRQ(EXT_IRQ16H(31), PORT138_FN0, PORT184_FN0),
};
static struct pinmux_info sh7372_pinmux_info = {
.name = "sh7372_pfc",
.reserved_id = PINMUX_RESERVED,
@ -1614,6 +1652,9 @@ static struct pinmux_info sh7372_pinmux_info = {
.gpio_data = pinmux_data,
.gpio_data_size = ARRAY_SIZE(pinmux_data),
.gpio_irq = pinmux_irqs,
.gpio_irq_size = ARRAY_SIZE(pinmux_irqs),
};
void sh7372_pinmux_init(void)

2
arch/arm/mach-shmobile/smp-sh73a0.c
View file

@ -80,7 +80,7 @@ int __cpuinit sh73a0_boot_secondary(unsigned int cpu)
/* enable cache coherency */
modify_scu_cpu_psr(0, 3 << (cpu * 8));
if (((__raw_readw(__io(PSTR)) >> (4 * cpu)) & 3) == 3)
if (((__raw_readl(__io(PSTR)) >> (4 * cpu)) & 3) == 3)
__raw_writel(1 << cpu, __io(WUPCR)); /* wake up */
else
__raw_writel(1 << cpu, __io(SRESCR)); /* reset */

2
arch/arm/mach-ux500/Kconfig
View file

@ -5,7 +5,7 @@ config UX500_SOC_COMMON
default y
select ARM_GIC
select HAS_MTU
select ARM_ERRATA_753970
select PL310_ERRATA_753970
select ARM_ERRATA_754322
select ARM_ERRATA_764369

2
arch/arm/mach-vexpress/Kconfig
View file

@ -7,7 +7,7 @@ config ARCH_VEXPRESS_CA9X4
select ARM_GIC
select ARM_ERRATA_720789
select ARM_ERRATA_751472
select ARM_ERRATA_753970
select PL310_ERRATA_753970
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0

3
arch/arm/mm/Kconfig
View file

@ -631,7 +631,8 @@ comment "Processor Features"
config ARM_LPAE
bool "Support for the Large Physical Address Extension"
depends on MMU && CPU_V7
depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \
!CPU_32v4 && !CPU_32v3
help
Say Y if you have an ARMv7 processor supporting the LPAE page
table format and you would like to access memory beyond the

2
arch/arm/mm/cache-v7.S
View file

@ -55,7 +55,7 @@ loop1:
cmp r1, #2 @ see what cache we have at this level
blt skip @ skip if no cache, or just i-cache
#ifdef CONFIG_PREEMPT
save_and_disable_irqs r9 @ make cssr&csidr read atomic
save_and_disable_irqs_notrace r9 @ make cssr&csidr read atomic
#endif
mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
isb @ isb to sych the new cssr&csidr

4
arch/arm/mm/proc-v7.S
View file

@ -230,9 +230,7 @@ __v7_setup:
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
#ifdef CONFIG_ARM_ERRATA_743622
teq r6, #0x20 @ present in r2p0
teqne r6, #0x21 @ present in r2p1
teqne r6, #0x22 @ present in r2p2
teq r5, #0x00200000 @ only present in r2p*
mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register
orreq r10, r10, #1 << 6 @ set bit #6
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register

1
arch/arm/plat-omap/common.c
View file

@ -69,6 +69,7 @@ void __init omap_reserve(void)
omap_vram_reserve_sdram_memblock();
omap_dsp_reserve_sdram_memblock();
omap_secure_ram_reserve_memblock();
omap_barrier_reserve_memblock();
}
void __init omap_init_consistent_dma_size(void)

10
arch/arm/plat-omap/include/plat/irqs.h
View file

@ -428,8 +428,16 @@
#define OMAP_GPMC_NR_IRQS 8
#define OMAP_GPMC_IRQ_END (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS)
/* PRCM IRQ handler */
#ifdef CONFIG_ARCH_OMAP2PLUS
#define OMAP_PRCM_IRQ_BASE (OMAP_GPMC_IRQ_END)
#define OMAP_PRCM_NR_IRQS 64
#define OMAP_PRCM_IRQ_END (OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS)
#else
#define OMAP_PRCM_IRQ_END OMAP_GPMC_IRQ_END
#endif
#define NR_IRQS OMAP_GPMC_IRQ_END
#define NR_IRQS OMAP_PRCM_IRQ_END
#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32))

6
arch/arm/plat-omap/include/plat/omap-secure.h
View file

@ -10,4 +10,10 @@ static inline void omap_secure_ram_reserve_memblock(void)
{ }
#endif
#ifdef CONFIG_OMAP4_ERRATA_I688
extern int omap_barrier_reserve_memblock(void);
#else
static inline void omap_barrier_reserve_memblock(void)
{ }
#endif
#endif /* __OMAP_SECURE_H__ */

2
arch/arm/plat-s3c24xx/dma.c
View file

@ -1249,7 +1249,7 @@ static void s3c2410_dma_resume(void)
struct s3c2410_dma_chan *cp = s3c2410_chans + dma_channels - 1;
int channel;
for (channel = dma_channels - 1; channel >= 0; cp++, channel--)
for (channel = dma_channels - 1; channel >= 0; cp--, channel--)
s3c2410_dma_resume_chan(cp);
}

2
arch/arm/plat-samsung/devs.c
View file

@ -1409,7 +1409,7 @@ void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd)
#ifdef CONFIG_S3C_DEV_USB_HSOTG
static struct resource s3c_usb_hsotg_resources[] = {
[0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_16K),
[0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_128K),
[1] = DEFINE_RES_IRQ(IRQ_OTG),
};

6
arch/arm/plat-spear/time.c
View file

@ -145,11 +145,13 @@ static void clockevent_set_mode(enum clock_event_mode mode,
static int clockevent_next_event(unsigned long cycles,
struct clock_event_device *clk_event_dev)
{
u16 val;
u16 val = readw(gpt_base + CR(CLKEVT));
if (val & CTRL_ENABLE)
writew(val & ~CTRL_ENABLE, gpt_base + CR(CLKEVT));
writew(cycles, gpt_base + LOAD(CLKEVT));
val = readw(gpt_base + CR(CLKEVT));
val |= CTRL_ENABLE | CTRL_INT_ENABLE;
writew(val, gpt_base + CR(CLKEVT));

2
arch/c6x/boot/Makefile
View file

@ -13,7 +13,7 @@ obj-y += linked_dtb.o
endif
$(obj)/%.dtb: $(src)/dts/%.dts FORCE
$(call cmd,dtc)
$(call if_changed_dep,dtc)
quiet_cmd_cp = CP $< $@$2
cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)

4
arch/c6x/include/asm/processor.h
View file

@ -122,8 +122,8 @@ extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
extern unsigned long get_wchan(struct task_struct *p);
#define KSTK_EIP(tsk) (task_pt_regs(task)->pc)
#define KSTK_ESP(tsk) (task_pt_regs(task)->sp)
#define KSTK_EIP(task) (task_pt_regs(task)->pc)
#define KSTK_ESP(task) (task_pt_regs(task)->sp)
#define cpu_relax() do { } while (0)

3
arch/m68k/include/asm/mcf_pgtable.h
View file

@ -78,7 +78,8 @@
| CF_PAGE_READABLE \
| CF_PAGE_WRITABLE \
| CF_PAGE_EXEC \
| CF_PAGE_SYSTEM)
| CF_PAGE_SYSTEM \
| CF_PAGE_SHARED)
#define PAGE_COPY __pgprot(CF_PAGE_VALID \
| CF_PAGE_ACCESSED \

9
arch/m68k/mm/mcfmmu.c
View file

@ -87,7 +87,7 @@ void __init paging_init(void)
int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word)
{
unsigned long flags, mmuar;
unsigned long flags, mmuar, mmutr;
struct mm_struct *mm;
pgd_t *pgd;
pmd_t *pmd;
@ -137,9 +137,10 @@ int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word)
if (!pte_dirty(*pte) && !KMAPAREA(mmuar))
set_pte(pte, pte_wrprotect(*pte));
mmu_write(MMUTR, (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) |
(((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK)
>> CF_PAGE_MMUTR_SHIFT) | MMUTR_V);
mmutr = (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) | MMUTR_V;
if ((mmuar < TASK_UNMAPPED_BASE) || (mmuar >= TASK_SIZE))
mmutr |= (pte->pte & CF_PAGE_MMUTR_MASK) >> CF_PAGE_MMUTR_SHIFT;
mmu_write(MMUTR, mmutr);
mmu_write(MMUDR, (pte_val(*pte) & PAGE_MASK) |
((pte->pte) & CF_PAGE_MMUDR_MASK) | MMUDR_SZ_8KB | MMUDR_X);

4
arch/m68k/platform/coldfire/entry.S
View file

@ -136,7 +136,7 @@ Luser_return:
movel %sp,%d1 /* get thread_info pointer */
andl #-THREAD_SIZE,%d1 /* at base of kernel stack */
movel %d1,%a0
movel %a0@(TINFO_FLAGS),%d1 /* get thread_info->flags */
moveb %a0@(TINFO_FLAGS+3),%d1 /* thread_info->flags (low 8 bits) */
jne Lwork_to_do /* still work to do */
Lreturn:
@ -148,8 +148,6 @@ Lwork_to_do:
btst #TIF_NEED_RESCHED,%d1
jne reschedule
/* GERG: do we need something here for TRACEing?? */
Lsignal_return:
subql #4,%sp /* dummy return address */
SAVE_SWITCH_STACK

Some files were not shown because too many files have changed in this diff Show more