Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Merge branch 'for-spi' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin into spi/next

Browse source
This commit is contained in:
Grant Likely 2010-10-18 09:25:09 -06:00
commit db181a8ee1
184 changed files with 2091 additions and 1433 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

373
Documentation/networking/e1000.txt
View file

@ -1,82 +1,35 @@
Linux* Base Driver for the Intel(R) PRO/1000 Family of Adapters
===============================================================
September 26, 2006
Intel Gigabit Linux driver.
Copyright(c) 1999 - 2010 Intel Corporation.
Contents
========
- In This Release
- Identifying Your Adapter
- Building and Installation
- Command Line Parameters
- Speed and Duplex Configuration
- Additional Configurations
- Known Issues
- Support
In This Release
===============
This file describes the Linux* Base Driver for the Intel(R) PRO/1000 Family
of Adapters. This driver includes support for Itanium(R)2-based systems.
For questions related to hardware requirements, refer to the documentation
supplied with your Intel PRO/1000 adapter. All hardware requirements listed
apply to use with Linux.
The following features are now available in supported kernels:
- Native VLANs
- Channel Bonding (teaming)
- SNMP
Channel Bonding documentation can be found in the Linux kernel source:
/Documentation/networking/bonding.txt
The driver information previously displayed in the /proc filesystem is not
supported in this release. Alternatively, you can use ethtool (version 1.6
or later), lspci, and ifconfig to obtain the same information.
Instructions on updating ethtool can be found in the section "Additional
Configurations" later in this document.
NOTE: The Intel(R) 82562v 10/100 Network Connection only provides 10/100
support.
Identifying Your Adapter
========================
For more information on how to identify your adapter, go to the Adapter &
Driver ID Guide at:
http://support.intel.com/support/network/adapter/pro100/21397.htm
http://support.intel.com/support/go/network/adapter/idguide.htm
For the latest Intel network drivers for Linux, refer to the following
website. In the search field, enter your adapter name or type, or use the
networking link on the left to search for your adapter:
http://downloadfinder.intel.com/scripts-df/support_intel.asp
http://support.intel.com/support/go/network/adapter/home.htm
Command Line Parameters
=======================
If the driver is built as a module, the following optional parameters
are used by entering them on the command line with the modprobe command
using this syntax:
modprobe e1000 [<option>=<VAL1>,<VAL2>,...]
For example, with two PRO/1000 PCI adapters, entering:
modprobe e1000 TxDescriptors=80,128
loads the e1000 driver with 80 TX descriptors for the first adapter and
128 TX descriptors for the second adapter.
The default value for each parameter is generally the recommended setting,
unless otherwise noted.
@ -89,10 +42,6 @@ NOTES: For more information about the AutoNeg, Duplex, and Speed
parameters, see the application note at:
http://www.intel.com/design/network/applnots/ap450.htm
A descriptor describes a data buffer and attributes related to
the data buffer. This information is accessed by the hardware.
AutoNeg
-------
(Supported only on adapters with copper connections)
@ -106,7 +55,6 @@ Duplex parameters must not be specified.
NOTE: Refer to the Speed and Duplex section of this readme for more
information on the AutoNeg parameter.
Duplex
------
(Supported only on adapters with copper connections)
@ -119,7 +67,6 @@ set to auto-negotiate, the board auto-detects the correct duplex. If the
link partner is forced (either full or half), Duplex defaults to half-
duplex.
FlowControl
-----------
Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx)
@ -128,16 +75,16 @@ Default Value: Reads flow control settings from the EEPROM
This parameter controls the automatic generation(Tx) and response(Rx)
to Ethernet PAUSE frames.
InterruptThrottleRate
---------------------
(not supported on Intel(R) 82542, 82543 or 82544-based adapters)
Valid Range: 0,1,3,100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
Valid Range: 0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative,
4=simplified balancing)
Default Value: 3
The driver can limit the amount of interrupts per second that the adapter
will generate for incoming packets. It does this by writing a value to the
adapter that is based on the maximum amount of interrupts that the adapter
will generate for incoming packets. It does this by writing a value to the
adapter that is based on the maximum amount of interrupts that the adapter
will generate per second.
Setting InterruptThrottleRate to a value greater or equal to 100
@ -146,37 +93,43 @@ per second, even if more packets have come in. This reduces interrupt
load on the system and can lower CPU utilization under heavy load,
but will increase latency as packets are not processed as quickly.
The default behaviour of the driver previously assumed a static
InterruptThrottleRate value of 8000, providing a good fallback value for
all traffic types,but lacking in small packet performance and latency.
The hardware can handle many more small packets per second however, and
The default behaviour of the driver previously assumed a static
InterruptThrottleRate value of 8000, providing a good fallback value for
all traffic types,but lacking in small packet performance and latency.
The hardware can handle many more small packets per second however, and
for this reason an adaptive interrupt moderation algorithm was implemented.
Since 7.3.x, the driver has two adaptive modes (setting 1 or 3) in which
it dynamically adjusts the InterruptThrottleRate value based on the traffic
it dynamically adjusts the InterruptThrottleRate value based on the traffic
that it receives. After determining the type of incoming traffic in the last
timeframe, it will adjust the InterruptThrottleRate to an appropriate value
timeframe, it will adjust the InterruptThrottleRate to an appropriate value
for that traffic.
The algorithm classifies the incoming traffic every interval into
classes. Once the class is determined, the InterruptThrottleRate value is
adjusted to suit that traffic type the best. There are three classes defined:
classes. Once the class is determined, the InterruptThrottleRate value is
adjusted to suit that traffic type the best. There are three classes defined:
"Bulk traffic", for large amounts of packets of normal size; "Low latency",
for small amounts of traffic and/or a significant percentage of small
packets; and "Lowest latency", for almost completely small packets or
packets; and "Lowest latency", for almost completely small packets or
minimal traffic.
In dynamic conservative mode, the InterruptThrottleRate value is set to 4000
for traffic that falls in class "Bulk traffic". If traffic falls in the "Low
latency" or "Lowest latency" class, the InterruptThrottleRate is increased
In dynamic conservative mode, the InterruptThrottleRate value is set to 4000
for traffic that falls in class "Bulk traffic". If traffic falls in the "Low
latency" or "Lowest latency" class, the InterruptThrottleRate is increased
stepwise to 20000. This default mode is suitable for most applications.
For situations where low latency is vital such as cluster or
grid computing, the algorithm can reduce latency even more when
InterruptThrottleRate is set to mode 1. In this mode, which operates
the same as mode 3, the InterruptThrottleRate will be increased stepwise to
the same as mode 3, the InterruptThrottleRate will be increased stepwise to
70000 for traffic in class "Lowest latency".
In simplified mode the interrupt rate is based on the ratio of Tx and
Rx traffic. If the bytes per second rate is approximately equal, the
interrupt rate will drop as low as 2000 interrupts per second. If the
traffic is mostly transmit or mostly receive, the interrupt rate could
be as high as 8000.
Setting InterruptThrottleRate to 0 turns off any interrupt moderation
and may improve small packet latency, but is generally not suitable
for bulk throughput traffic.
@ -212,8 +165,6 @@ NOTE: When e1000 is loaded with default settings and multiple adapters
be platform-specific. If CPU utilization is not a concern, use
RX_POLLING (NAPI) and default driver settings.
RxDescriptors
-------------
Valid Range: 80-256 for 82542 and 82543-based adapters
@ -225,15 +176,14 @@ by the driver. Increasing this value allows the driver to buffer more
incoming packets, at the expense of increased system memory utilization.
Each descriptor is 16 bytes. A receive buffer is also allocated for each
descriptor and can be either 2048, 4096, 8192, or 16384 bytes, depending
descriptor and can be either 2048, 4096, 8192, or 16384 bytes, depending
on the MTU setting. The maximum MTU size is 16110.
NOTE: MTU designates the frame size. It only needs to be set for Jumbo
Frames. Depending on the available system resources, the request
for a higher number of receive descriptors may be denied. In this
NOTE: MTU designates the frame size. It only needs to be set for Jumbo
Frames. Depending on the available system resources, the request
for a higher number of receive descriptors may be denied. In this
case, use a lower number.
RxIntDelay
----------
Valid Range: 0-65535 (0=off)
@ -254,7 +204,6 @@ CAUTION: When setting RxIntDelay to a value other than 0, adapters may
restoring the network connection. To eliminate the potential
for the hang ensure that RxIntDelay is set to 0.
RxAbsIntDelay
-------------
(This parameter is supported only on 82540, 82545 and later adapters.)
@ -268,7 +217,6 @@ packet is received within the set amount of time. Proper tuning,
along with RxIntDelay, may improve traffic throughput in specific network
conditions.
Speed
-----
(This parameter is supported only on adapters with copper connections.)
@ -280,7 +228,6 @@ Speed forces the line speed to the specified value in megabits per second
partner is set to auto-negotiate, the board will auto-detect the correct
speed. Duplex should also be set when Speed is set to either 10 or 100.
TxDescriptors
-------------
Valid Range: 80-256 for 82542 and 82543-based adapters
@ -295,6 +242,36 @@ NOTE: Depending on the available system resources, the request for a
higher number of transmit descriptors may be denied. In this case,
use a lower number.
TxDescriptorStep
----------------
Valid Range: 1 (use every Tx Descriptor)
4 (use every 4th Tx Descriptor)
Default Value: 1 (use every Tx Descriptor)
On certain non-Intel architectures, it has been observed that intense TX
traffic bursts of short packets may result in an improper descriptor
writeback. If this occurs, the driver will report a "TX Timeout" and reset
the adapter, after which the transmit flow will restart, though data may
have stalled for as much as 10 seconds before it resumes.
The improper writeback does not occur on the first descriptor in a system
memory cache-line, which is typically 32 bytes, or 4 descriptors long.
Setting TxDescriptorStep to a value of 4 will ensure that all TX descriptors
are aligned to the start of a system memory cache line, and so this problem
will not occur.
NOTES: Setting TxDescriptorStep to 4 effectively reduces the number of
TxDescriptors available for transmits to 1/4 of the normal allocation.
This has a possible negative performance impact, which may be
compensated for by allocating more descriptors using the TxDescriptors
module parameter.
There are other conditions which may result in "TX Timeout", which will
not be resolved by the use of the TxDescriptorStep parameter. As the
issue addressed by this parameter has never been observed on Intel
Architecture platforms, it should not be used on Intel platforms.
TxIntDelay
----------
@ -307,7 +284,6 @@ efficiency if properly tuned for specific network traffic. If the
system is reporting dropped transmits, this value may be set too high
causing the driver to run out of available transmit descriptors.
TxAbsIntDelay
-------------
(This parameter is supported only on 82540, 82545 and later adapters.)
@ -330,6 +306,35 @@ Default Value: 1
A value of '1' indicates that the driver should enable IP checksum
offload for received packets (both UDP and TCP) to the adapter hardware.
Copybreak
---------
Valid Range: 0-xxxxxxx (0=off)
Default Value: 256
Usage: insmod e1000.ko copybreak=128
Driver copies all packets below or equaling this size to a fresh Rx
buffer before handing it up the stack.
This parameter is different than other parameters, in that it is a
single (not 1,1,1 etc.) parameter applied to all driver instances and
it is also available during runtime at
/sys/module/e1000/parameters/copybreak
SmartPowerDownEnable
--------------------
Valid Range: 0-1
Default Value: 0 (disabled)
Allows PHY to turn off in lower power states. The user can turn off
this parameter in supported chipsets.
KumeranLockLoss
---------------
Valid Range: 0-1
Default Value: 1 (enabled)
This workaround skips resetting the PHY at shutdown for the initial
silicon releases of ICH8 systems.
Speed and Duplex Configuration
==============================
@ -385,40 +390,9 @@ If the link partner is forced to a specific speed and duplex, then this
parameter should not be used. Instead, use the Speed and Duplex parameters
previously mentioned to force the adapter to the same speed and duplex.
Additional Configurations
=========================
Configuring the Driver on Different Distributions
-------------------------------------------------
Configuring a network driver to load properly when the system is started
is distribution dependent. Typically, the configuration process involves
adding an alias line to /etc/modules.conf or /etc/modprobe.conf as well
as editing other system startup scripts and/or configuration files. Many
popular Linux distributions ship with tools to make these changes for you.
To learn the proper way to configure a network device for your system,
refer to your distribution documentation. If during this process you are
asked for the driver or module name, the name for the Linux Base Driver
for the Intel(R) PRO/1000 Family of Adapters is e1000.
As an example, if you install the e1000 driver for two PRO/1000 adapters
(eth0 and eth1) and set the speed and duplex to 10full and 100half, add
the following to modules.conf or or modprobe.conf:
alias eth0 e1000
alias eth1 e1000
options e1000 Speed=10,100 Duplex=2,1
Viewing Link Messages
---------------------
Link messages will not be displayed to the console if the distribution is
restricting system messages. In order to see network driver link messages
on your console, set dmesg to eight by entering the following:
dmesg -n 8
NOTE: This setting is not saved across reboots.
Jumbo Frames
------------
Jumbo Frames support is enabled by changing the MTU to a value larger than
@ -437,9 +411,11 @@ Additional Configurations
setting in a different location.
Notes:
- To enable Jumbo Frames, increase the MTU size on the interface beyond
1500.
Degradation in throughput performance may be observed in some Jumbo frames
environments. If this is observed, increasing the application's socket buffer
size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help.
See the specific application manual and /usr/src/linux*/Documentation/
networking/ip-sysctl.txt for more details.
- The maximum MTU setting for Jumbo Frames is 16110. This value coincides
with the maximum Jumbo Frames size of 16128.
@ -447,40 +423,11 @@ Additional Configurations
- Using Jumbo Frames at 10 or 100 Mbps may result in poor performance or
loss of link.
- Some Intel gigabit adapters that support Jumbo Frames have a frame size
limit of 9238 bytes, with a corresponding MTU size limit of 9216 bytes.
The adapters with this limitation are based on the Intel(R) 82571EB,
82572EI, 82573L and 80003ES2LAN controller. These correspond to the
following product names:
Intel(R) PRO/1000 PT Server Adapter
Intel(R) PRO/1000 PT Desktop Adapter
Intel(R) PRO/1000 PT Network Connection
Intel(R) PRO/1000 PT Dual Port Server Adapter
Intel(R) PRO/1000 PT Dual Port Network Connection
Intel(R) PRO/1000 PF Server Adapter
Intel(R) PRO/1000 PF Network Connection
Intel(R) PRO/1000 PF Dual Port Server Adapter
Intel(R) PRO/1000 PB Server Connection
Intel(R) PRO/1000 PL Network Connection
Intel(R) PRO/1000 EB Network Connection with I/O Acceleration
Intel(R) PRO/1000 EB Backplane Connection with I/O Acceleration
Intel(R) PRO/1000 PT Quad Port Server Adapter
- Adapters based on the Intel(R) 82542 and 82573V/E controller do not
support Jumbo Frames. These correspond to the following product names:
Intel(R) PRO/1000 Gigabit Server Adapter
Intel(R) PRO/1000 PM Network Connection
- The following adapters do not support Jumbo Frames:
Intel(R) 82562V 10/100 Network Connection
Intel(R) 82566DM Gigabit Network Connection
Intel(R) 82566DC Gigabit Network Connection
Intel(R) 82566MM Gigabit Network Connection
Intel(R) 82566MC Gigabit Network Connection
Intel(R) 82562GT 10/100 Network Connection
Intel(R) 82562G 10/100 Network Connection
Ethtool
-------
The driver utilizes the ethtool interface for driver configuration and
@ -490,142 +437,14 @@ Additional Configurations
The latest release of ethtool can be found from
http://sourceforge.net/projects/gkernel.
NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support
for a more complete ethtool feature set can be enabled by upgrading
ethtool to ethtool-1.8.1.
Enabling Wake on LAN* (WoL)
---------------------------
WoL is configured through the Ethtool* utility. Ethtool is included with
all versions of Red Hat after Red Hat 7.2. For other Linux distributions,
download and install Ethtool from the following website:
http://sourceforge.net/projects/gkernel.
For instructions on enabling WoL with Ethtool, refer to the website listed
above.
WoL is configured through the Ethtool* utility.
WoL will be enabled on the system during the next shut down or reboot.
For this driver version, in order to enable WoL, the e1000 driver must be
loaded when shutting down or rebooting the system.
Wake On LAN is only supported on port A for the following devices:
Intel(R) PRO/1000 PT Dual Port Network Connection
Intel(R) PRO/1000 PT Dual Port Server Connection
Intel(R) PRO/1000 PT Dual Port Server Adapter
Intel(R) PRO/1000 PF Dual Port Server Adapter
Intel(R) PRO/1000 PT Quad Port Server Adapter
NAPI
----
NAPI (Rx polling mode) is enabled in the e1000 driver.
See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
Known Issues
============
Dropped Receive Packets on Half-duplex 10/100 Networks
------------------------------------------------------
If you have an Intel PCI Express adapter running at 10mbps or 100mbps, half-
duplex, you may observe occasional dropped receive packets. There are no
workarounds for this problem in this network configuration. The network must
be updated to operate in full-duplex, and/or 1000mbps only.
Jumbo Frames System Requirement
-------------------------------
Memory allocation failures have been observed on Linux systems with 64 MB
of RAM or less that are running Jumbo Frames. If you are using Jumbo
Frames, your system may require more than the advertised minimum
requirement of 64 MB of system memory.
Performance Degradation with Jumbo Frames
-----------------------------------------
Degradation in throughput performance may be observed in some Jumbo frames
environments. If this is observed, increasing the application's socket
buffer size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values
may help. See the specific application manual and
/usr/src/linux*/Documentation/
networking/ip-sysctl.txt for more details.
Jumbo Frames on Foundry BigIron 8000 switch
-------------------------------------------
There is a known issue using Jumbo frames when connected to a Foundry
BigIron 8000 switch. This is a 3rd party limitation. If you experience
loss of packets, lower the MTU size.
Allocating Rx Buffers when Using Jumbo Frames
---------------------------------------------
Allocating Rx buffers when using Jumbo Frames on 2.6.x kernels may fail if
the available memory is heavily fragmented. This issue may be seen with PCI-X
adapters or with packet split disabled. This can be reduced or eliminated
by changing the amount of available memory for receive buffer allocation, by
increasing /proc/sys/vm/min_free_kbytes.
Multiple Interfaces on Same Ethernet Broadcast Network
------------------------------------------------------
Due to the default ARP behavior on Linux, it is not possible to have
one system on two IP networks in the same Ethernet broadcast domain
(non-partitioned switch) behave as expected. All Ethernet interfaces
will respond to IP traffic for any IP address assigned to the system.
This results in unbalanced receive traffic.
If you have multiple interfaces in a server, either turn on ARP
filtering by entering:
echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
(this only works if your kernel's version is higher than 2.4.5),
NOTE: This setting is not saved across reboots. The configuration
change can be made permanent by adding the line:
net.ipv4.conf.all.arp_filter = 1
to the file /etc/sysctl.conf
or,
install the interfaces in separate broadcast domains (either in
different switches or in a switch partitioned to VLANs).
82541/82547 can't link or are slow to link with some link partners
-----------------------------------------------------------------
There is a known compatibility issue with 82541/82547 and some
low-end switches where the link will not be established, or will
be slow to establish. In particular, these switches are known to
be incompatible with 82541/82547:
Planex FXG-08TE
I-O Data ETG-SH8
To workaround this issue, the driver can be compiled with an override
of the PHY's master/slave setting. Forcing master or forcing slave
mode will improve time-to-link.
# make CFLAGS_EXTRA=-DE1000_MASTER_SLAVE=<n>
Where <n> is:
0 = Hardware default
1 = Master mode
2 = Slave mode
3 = Auto master/slave
Disable rx flow control with ethtool
------------------------------------
In order to disable receive flow control using ethtool, you must turn
off auto-negotiation on the same command line.
For example:
ethtool -A eth? autoneg off rx off
Unplugging network cable while ethtool -p is running
----------------------------------------------------
In kernel versions 2.5.50 and later (including 2.6 kernel), unplugging
the network cable while ethtool -p is running will cause the system to
become unresponsive to keyboard commands, except for control-alt-delete.
Restarting the system appears to be the only remedy.
Support
=======

302
Documentation/networking/e1000e.txt Normal file
View file

@ -0,0 +1,302 @@
Linux* Driver for Intel(R) Network Connection
===============================================================
Intel Gigabit Linux driver.
Copyright(c) 1999 - 2010 Intel Corporation.
Contents
========
- Identifying Your Adapter
- Command Line Parameters
- Additional Configurations
- Support
Identifying Your Adapter
========================
The e1000e driver supports all PCI Express Intel(R) Gigabit Network
Connections, except those that are 82575, 82576 and 82580-based*.
* NOTE: The Intel(R) PRO/1000 P Dual Port Server Adapter is supported by
the e1000 driver, not the e1000e driver due to the 82546 part being used
behind a PCI Express bridge.
For more information on how to identify your adapter, go to the Adapter &
Driver ID Guide at:
http://support.intel.com/support/go/network/adapter/idguide.htm
For the latest Intel network drivers for Linux, refer to the following
website. In the search field, enter your adapter name or type, or use the
networking link on the left to search for your adapter:
http://support.intel.com/support/go/network/adapter/home.htm
Command Line Parameters
=======================
The default value for each parameter is generally the recommended setting,
unless otherwise noted.
NOTES: For more information about the InterruptThrottleRate,
RxIntDelay, TxIntDelay, RxAbsIntDelay, and TxAbsIntDelay
parameters, see the application note at:
http://www.intel.com/design/network/applnots/ap450.htm
InterruptThrottleRate
---------------------
Valid Range: 0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative,
4=simplified balancing)
Default Value: 3
The driver can limit the amount of interrupts per second that the adapter
will generate for incoming packets. It does this by writing a value to the
adapter that is based on the maximum amount of interrupts that the adapter
will generate per second.
Setting InterruptThrottleRate to a value greater or equal to 100
will program the adapter to send out a maximum of that many interrupts
per second, even if more packets have come in. This reduces interrupt
load on the system and can lower CPU utilization under heavy load,
but will increase latency as packets are not processed as quickly.
The driver has two adaptive modes (setting 1 or 3) in which
it dynamically adjusts the InterruptThrottleRate value based on the traffic
that it receives. After determining the type of incoming traffic in the last
timeframe, it will adjust the InterruptThrottleRate to an appropriate value
for that traffic.
The algorithm classifies the incoming traffic every interval into
classes. Once the class is determined, the InterruptThrottleRate value is
adjusted to suit that traffic type the best. There are three classes defined:
"Bulk traffic", for large amounts of packets of normal size; "Low latency",
for small amounts of traffic and/or a significant percentage of small
packets; and "Lowest latency", for almost completely small packets or
minimal traffic.
In dynamic conservative mode, the InterruptThrottleRate value is set to 4000
for traffic that falls in class "Bulk traffic". If traffic falls in the "Low
latency" or "Lowest latency" class, the InterruptThrottleRate is increased
stepwise to 20000. This default mode is suitable for most applications.
For situations where low latency is vital such as cluster or
grid computing, the algorithm can reduce latency even more when
InterruptThrottleRate is set to mode 1. In this mode, which operates
the same as mode 3, the InterruptThrottleRate will be increased stepwise to
70000 for traffic in class "Lowest latency".
In simplified mode the interrupt rate is based on the ratio of Tx and
Rx traffic. If the bytes per second rate is approximately equal the
interrupt rate will drop as low as 2000 interrupts per second. If the
traffic is mostly transmit or mostly receive, the interrupt rate could
be as high as 8000.
Setting InterruptThrottleRate to 0 turns off any interrupt moderation
and may improve small packet latency, but is generally not suitable
for bulk throughput traffic.
NOTE: InterruptThrottleRate takes precedence over the TxAbsIntDelay and
RxAbsIntDelay parameters. In other words, minimizing the receive
and/or transmit absolute delays does not force the controller to
generate more interrupts than what the Interrupt Throttle Rate
allows.
NOTE: When e1000e is loaded with default settings and multiple adapters
are in use simultaneously, the CPU utilization may increase non-
linearly. In order to limit the CPU utilization without impacting
the overall throughput, we recommend that you load the driver as
follows:
modprobe e1000e InterruptThrottleRate=3000,3000,3000
This sets the InterruptThrottleRate to 3000 interrupts/sec for
the first, second, and third instances of the driver. The range
of 2000 to 3000 interrupts per second works on a majority of
systems and is a good starting point, but the optimal value will
be platform-specific. If CPU utilization is not a concern, use
RX_POLLING (NAPI) and default driver settings.
RxIntDelay
----------
Valid Range: 0-65535 (0=off)
Default Value: 0
This value delays the generation of receive interrupts in units of 1.024
microseconds. Receive interrupt reduction can improve CPU efficiency if
properly tuned for specific network traffic. Increasing this value adds
extra latency to frame reception and can end up decreasing the throughput
of TCP traffic. If the system is reporting dropped receives, this value
may be set too high, causing the driver to run out of available receive
descriptors.
CAUTION: When setting RxIntDelay to a value other than 0, adapters may
hang (stop transmitting) under certain network conditions. If
this occurs a NETDEV WATCHDOG message is logged in the system
event log. In addition, the controller is automatically reset,
restoring the network connection. To eliminate the potential
for the hang ensure that RxIntDelay is set to 0.
RxAbsIntDelay
-------------
Valid Range: 0-65535 (0=off)
Default Value: 8
This value, in units of 1.024 microseconds, limits the delay in which a
receive interrupt is generated. Useful only if RxIntDelay is non-zero,
this value ensures that an interrupt is generated after the initial
packet is received within the set amount of time. Proper tuning,
along with RxIntDelay, may improve traffic throughput in specific network
conditions.
TxIntDelay
----------
Valid Range: 0-65535 (0=off)
Default Value: 8
This value delays the generation of transmit interrupts in units of
1.024 microseconds. Transmit interrupt reduction can improve CPU
efficiency if properly tuned for specific network traffic. If the
system is reporting dropped transmits, this value may be set too high
causing the driver to run out of available transmit descriptors.
TxAbsIntDelay
-------------
Valid Range: 0-65535 (0=off)
Default Value: 32
This value, in units of 1.024 microseconds, limits the delay in which a
transmit interrupt is generated. Useful only if TxIntDelay is non-zero,
this value ensures that an interrupt is generated after the initial
packet is sent on the wire within the set amount of time. Proper tuning,
along with TxIntDelay, may improve traffic throughput in specific
network conditions.
Copybreak
---------
Valid Range: 0-xxxxxxx (0=off)
Default Value: 256
Driver copies all packets below or equaling this size to a fresh Rx
buffer before handing it up the stack.
This parameter is different than other parameters, in that it is a
single (not 1,1,1 etc.) parameter applied to all driver instances and
it is also available during runtime at
/sys/module/e1000e/parameters/copybreak
SmartPowerDownEnable
--------------------
Valid Range: 0-1
Default Value: 0 (disabled)
Allows PHY to turn off in lower power states. The user can set this parameter
in supported chipsets.
KumeranLockLoss
---------------
Valid Range: 0-1
Default Value: 1 (enabled)
This workaround skips resetting the PHY at shutdown for the initial
silicon releases of ICH8 systems.
IntMode
-------
Valid Range: 0-2 (0=legacy, 1=MSI, 2=MSI-X)
Default Value: 2
Allows changing the interrupt mode at module load time, without requiring a
recompile. If the driver load fails to enable a specific interrupt mode, the
driver will try other interrupt modes, from least to most compatible. The
interrupt order is MSI-X, MSI, Legacy. If specifying MSI (IntMode=1)
interrupts, only MSI and Legacy will be attempted.
CrcStripping
------------
Valid Range: 0-1
Default Value: 1 (enabled)
Strip the CRC from received packets before sending up the network stack. If
you have a machine with a BMC enabled but cannot receive IPMI traffic after
loading or enabling the driver, try disabling this feature.
WriteProtectNVM
---------------
Valid Range: 0-1
Default Value: 1 (enabled)
Set the hardware to ignore all write/erase cycles to the GbE region in the
ICHx NVM (non-volatile memory). This feature can be disabled by the
WriteProtectNVM module parameter (enabled by default) only after a hardware
reset, but the machine must be power cycled before trying to enable writes.
Note: the kernel boot option iomem=relaxed may need to be set if the kernel
config option CONFIG_STRICT_DEVMEM=y, if the root user wants to write the
NVM from user space via ethtool.
Additional Configurations
=========================
Jumbo Frames
------------
Jumbo Frames support is enabled by changing the MTU to a value larger than
the default of 1500. Use the ifconfig command to increase the MTU size.
For example:
ifconfig eth<x> mtu 9000 up
This setting is not saved across reboots.
Notes:
- The maximum MTU setting for Jumbo Frames is 9216. This value coincides
with the maximum Jumbo Frames size of 9234 bytes.
- Using Jumbo Frames at 10 or 100 Mbps is not supported and may result in
poor performance or loss of link.
- Some adapters limit Jumbo Frames sized packets to a maximum of
4096 bytes and some adapters do not support Jumbo Frames.
Ethtool
-------
The driver utilizes the ethtool interface for driver configuration and
diagnostics, as well as displaying statistical information. We
strongly recommend downloading the latest version of Ethtool at:
http://sourceforge.net/projects/gkernel.
Speed and Duplex
----------------
Speed and Duplex are configured through the Ethtool* utility. For
instructions, refer to the Ethtool man page.
Enabling Wake on LAN* (WoL)
---------------------------
WoL is configured through the Ethtool* utility. For instructions on
enabling WoL with Ethtool, refer to the Ethtool man page.
WoL will be enabled on the system during the next shut down or reboot.
For this driver version, in order to enable WoL, the e1000e driver must be
loaded when shutting down or rebooting the system.
In most cases Wake On LAN is only supported on port A for multiple port
adapters. To verify if a port supports Wake on LAN run ethtool eth<X>.
Support
=======
For general information, go to the Intel support website at:
www.intel.com/support/
or the Intel Wired Networking project hosted by Sourceforge at:
http://sourceforge.net/projects/e1000
If an issue is identified with the released source code on the supported
kernel with a supported adapter, email the specific information related
to the issue to e1000-devel@lists.sf.net

40
Documentation/networking/ixgbevf.txt Executable file → Normal file
View file

@ -1,19 +1,16 @@
Linux* Base Driver for Intel(R) Network Connection
==================================================
November 24, 2009
Intel Gigabit Linux driver.
Copyright(c) 1999 - 2010 Intel Corporation.
Contents
========
- In This Release
- Identifying Your Adapter
- Known Issues/Troubleshooting
- Support
In This Release
===============
This file describes the ixgbevf Linux* Base Driver for Intel Network
Connection.
@ -33,7 +30,7 @@ Identifying Your Adapter
For more information on how to identify your adapter, go to the Adapter &
Driver ID Guide at:
http://support.intel.com/support/network/sb/CS-008441.htm
http://support.intel.com/support/go/network/adapter/idguide.htm
Known Issues/Troubleshooting
============================
@ -57,34 +54,3 @@ or the Intel Wired Networking project hosted by Sourceforge at:
If an issue is identified with the released source code on the supported
kernel with a supported adapter, email the specific information related
to the issue to e1000-devel@lists.sf.net
License
=======
Intel 10 Gigabit Linux driver.
Copyright(c) 1999 - 2009 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
version 2, as published by the Free Software Foundation.
This program is distributed in the hope it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
Trademarks
==========
Intel, Itanium, and Pentium are trademarks or registered trademarks of
Intel Corporation or its subsidiaries in the United States and other
countries.
* Other names and brands may be claimed as the property of others.

2
Documentation/vm/page-types.c
View file

@ -478,7 +478,7 @@ static void prepare_hwpoison_fd(void)
}
if (opt_unpoison && !hwpoison_forget_fd) {
sprintf(buf, "%s/renew-pfn", hwpoison_debug_fs);
sprintf(buf, "%s/unpoison-pfn", hwpoison_debug_fs);
hwpoison_forget_fd = checked_open(buf, O_WRONLY);
}
}

38
MAINTAINERS
View file

@ -969,6 +969,16 @@ L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-s5p*/
ARM/SAMSUNG S5P SERIES FIMC SUPPORT
M: Kyungmin Park <kyungmin.park@samsung.com>
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
L: linux-arm-kernel@lists.infradead.org
L: linux-media@vger.kernel.org
S: Maintained
F: arch/arm/plat-s5p/dev-fimc*
F: arch/arm/plat-samsung/include/plat/*fimc*
F: drivers/media/video/s5p-fimc/
ARM/SHMOBILE ARM ARCHITECTURE
M: Paul Mundt <lethal@linux-sh.org>
M: Magnus Damm <magnus.damm@gmail.com>
@ -2535,7 +2545,7 @@ S: Supported
F: drivers/scsi/gdt*
GENERIC GPIO I2C DRIVER
M: Haavard Skinnemoen <hskinnemoen@atmel.com>
M: Haavard Skinnemoen <hskinnemoen@gmail.com>
S: Supported
F: drivers/i2c/busses/i2c-gpio.c
F: include/linux/i2c-gpio.h
@ -3063,16 +3073,27 @@ L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ixp2000/
INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe)
INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe/ixgbevf)
M: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
M: Jesse Brandeburg <jesse.brandeburg@intel.com>
M: Bruce Allan <bruce.w.allan@intel.com>
M: Alex Duyck <alexander.h.duyck@intel.com>
M: Carolyn Wyborny <carolyn.wyborny@intel.com>
M: Don Skidmore <donald.c.skidmore@intel.com>
M: Greg Rose <gregory.v.rose@intel.com>
M: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
M: Alex Duyck <alexander.h.duyck@intel.com>
M: John Ronciak <john.ronciak@intel.com>
L: e1000-devel@lists.sourceforge.net
W: http://e1000.sourceforge.net/
S: Supported
F: Documentation/networking/e100.txt
F: Documentation/networking/e1000.txt
F: Documentation/networking/e1000e.txt
F: Documentation/networking/igb.txt
F: Documentation/networking/igbvf.txt
F: Documentation/networking/ixgb.txt
F: Documentation/networking/ixgbe.txt
F: Documentation/networking/ixgbevf.txt
F: drivers/net/e100.c
F: drivers/net/e1000/
F: drivers/net/e1000e/
@ -3080,6 +3101,7 @@ F: drivers/net/igb/
F: drivers/net/igbvf/
F: drivers/net/ixgb/
F: drivers/net/ixgbe/
F: drivers/net/ixgbevf/
INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
L: linux-wireless@vger.kernel.org
@ -5008,6 +5030,12 @@ F: drivers/media/common/saa7146*
F: drivers/media/video/*7146*
F: include/media/*7146*
SAMSUNG AUDIO (ASoC) DRIVERS
M: Jassi Brar <jassi.brar@samsung.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Supported
F: sound/soc/s3c24xx
TLG2300 VIDEO4LINUX-2 DRIVER
M: Huang Shijie <shijie8@gmail.com>
M: Kang Yong <kangyong@telegent.com>
@ -6450,8 +6478,10 @@ F: include/linux/wm97xx.h
WOLFSON MICROELECTRONICS DRIVERS
M: Mark Brown <broonie@opensource.wolfsonmicro.com>
M: Ian Lartey <ian@opensource.wolfsonmicro.com>
M: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
T: git git://opensource.wolfsonmicro.com/linux-2.6-asoc
T: git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
W: http://opensource.wolfsonmicro.com/node/8
W: http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices
S: Supported
F: Documentation/hwmon/wm83??
F: drivers/leds/leds-wm83*.c

4
Makefile
View file

@ -1,8 +1,8 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 36
EXTRAVERSION = -rc7
NAME = Sheep on Meth
EXTRAVERSION = -rc8
NAME = Flesh-Eating Bats with Fangs
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"

14
arch/arm/Kconfig
View file

@ -1101,6 +1101,20 @@ config ARM_ERRATA_720789
invalidated are not, resulting in an incoherency in the system page
tables. The workaround changes the TLB flushing routines to invalidate
entries regardless of the ASID.
config ARM_ERRATA_743622
bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
depends on CPU_V7
help
This option enables the workaround for the 743622 Cortex-A9
(r2p0..r2p2) erratum. Under very rare conditions, a faulty
optimisation in the Cortex-A9 Store Buffer may lead to data
corruption. This workaround sets a specific bit in the diagnostic
register of the Cortex-A9 which disables the Store Buffer
optimisation, preventing the defect from occurring. This has no
visible impact on the overall performance or power consumption of the
processor.
endmenu
source "arch/arm/common/Kconfig"

7
arch/arm/kernel/kprobes-decode.c
View file

@ -1162,11 +1162,12 @@ space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
{
/*
* MSR : cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx
* Undef : cccc 0011 0x00 xxxx xxxx xxxx xxxx xxxx
* Undef : cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx
* ALU op with S bit and Rd == 15 :
* cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx
*/
if ((insn & 0x0f900000) == 0x03200000 || /* MSR & Undef */
if ((insn & 0x0fb00000) == 0x03200000 || /* MSR */
(insn & 0x0ff00000) == 0x03400000 || /* Undef */
(insn & 0x0e10f000) == 0x0210f000) /* ALU s-bit, R15 */
return INSN_REJECTED;
@ -1177,7 +1178,7 @@ space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
* *S (bit 20) updates condition codes
* ADC/SBC/RSC reads the C flag
*/
insn &= 0xfff00fff; /* Rn = r0, Rd = r0 */
insn &= 0xffff0fff; /* Rd = r0 */
asi->insn[0] = insn;
asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */
emulate_alu_imm_rwflags : emulate_alu_imm_rflags;

7
arch/arm/mach-at91/include/mach/system.h
View file

@ -28,17 +28,16 @@
static inline void arch_idle(void)
{
#ifndef CONFIG_DEBUG_KERNEL
/*
* Disable the processor clock. The processor will be automatically
* re-enabled by an interrupt or by a reset.
*/
at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
#else
#ifndef CONFIG_CPU_ARM920T
/*
* Set the processor (CP15) into 'Wait for Interrupt' mode.
* Unlike disabling the processor clock via the PMC (above)
* this allows the processor to be woken via JTAG.
* Post-RM9200 processors need this in conjunction with the above
* to save power when idle.
*/
cpu_do_idle();
#endif

2
arch/arm/mach-ep93xx/dma-m2p.c
View file

@ -276,7 +276,7 @@ static void channel_disable(struct m2p_channel *ch)
v &= ~(M2P_CONTROL_STALL_IRQ_EN | M2P_CONTROL_NFB_IRQ_EN);
m2p_set_control(ch, v);
while (m2p_channel_state(ch) == STATE_ON)
while (m2p_channel_state(ch) >= STATE_ON)
cpu_relax();
m2p_set_control(ch, 0x0);

1
arch/arm/mach-imx/Kconfig
View file

@ -122,6 +122,7 @@ config MACH_CPUIMX27
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_NAND
select MXC_ULPI if USB_ULPI
help
Include support for Eukrea CPUIMX27 platform. This includes
specific configurations for the module and its peripherals.

2
arch/arm/mach-imx/mach-cpuimx27.c
View file

@ -259,7 +259,7 @@ static void __init eukrea_cpuimx27_init(void)
i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
imx27_add_i2c_imx1(&cpuimx27_i2c1_data);
imx27_add_i2c_imx0(&cpuimx27_i2c1_data);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));

1
arch/arm/mach-s5p6440/cpu.c
View file

@ -19,6 +19,7 @@
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

1
arch/arm/mach-s5p6442/cpu.c
View file

@ -19,6 +19,7 @@
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

1
arch/arm/mach-s5pc100/cpu.c
View file

@ -21,6 +21,7 @@
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

5
arch/arm/mach-s5pv210/clock.c
View file

@ -173,11 +173,6 @@ static int s5pv210_clk_ip3_ctrl(struct clk *clk, int enable)
return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
}
static int s5pv210_clk_ip4_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKGATE_IP4, clk, enable);
}
static int s5pv210_clk_mask0_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLK_SRC_MASK0, clk, enable);

1
arch/arm/mach-s5pv210/cpu.c
View file

@ -19,6 +19,7 @@
#include <linux/io.h>
#include <linux/sysdev.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

4
arch/arm/mach-vexpress/ct-ca9x4.c
View file

@ -68,7 +68,7 @@ static void __init ct_ca9x4_init_irq(void)
}
#if 0
static void ct_ca9x4_timer_init(void)
static void __init ct_ca9x4_timer_init(void)
{
writel(0, MMIO_P2V(CT_CA9X4_TIMER0) + TIMER_CTRL);
writel(0, MMIO_P2V(CT_CA9X4_TIMER1) + TIMER_CTRL);
@ -222,7 +222,7 @@ static struct platform_device pmu_device = {
.resource = pmu_resources,
};
static void ct_ca9x4_init(void)
static void __init ct_ca9x4_init(void)
{
int i;

2
arch/arm/mach-vexpress/v2m.c
View file

@ -48,7 +48,7 @@ void __init v2m_map_io(struct map_desc *tile, size_t num)
}
static void v2m_timer_init(void)
static void __init v2m_timer_init(void)
{
writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL);
writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL);

8
arch/arm/mm/ioremap.c
View file

@ -204,8 +204,12 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
/*
* Don't allow RAM to be mapped - this causes problems with ARMv6+
*/
if (WARN_ON(pfn_valid(pfn)))
return NULL;
if (pfn_valid(pfn)) {
printk(KERN_WARNING "BUG: Your driver calls ioremap() on system memory. This leads\n"
KERN_WARNING "to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n"
KERN_WARNING "will fail in the next kernel release. Please fix your driver.\n");
WARN_ON(1);
}
type = get_mem_type(mtype);
if (!type)

4
arch/arm/mm/mmu.c
View file

@ -248,7 +248,7 @@ static struct mem_type mem_types[] = {
},
[MT_MEMORY] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_USER | L_PTE_EXEC,
L_PTE_WRITE | L_PTE_EXEC,
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
.domain = DOMAIN_KERNEL,
@ -259,7 +259,7 @@ static struct mem_type mem_types[] = {
},
[MT_MEMORY_NONCACHED] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_USER | L_PTE_EXEC | L_PTE_MT_BUFFERABLE,
L_PTE_WRITE | L_PTE_EXEC | L_PTE_MT_BUFFERABLE,
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
.domain = DOMAIN_KERNEL,

10
arch/arm/mm/proc-v7.S
View file

@ -253,6 +253,14 @@ __v7_setup:
orreq r10, r10, #1 << 22 @ set bit #22
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
#ifdef CONFIG_ARM_ERRATA_743622
teq r6, #0x20 @ present in r2p0
teqne r6, #0x21 @ present in r2p1
teqne r6, #0x22 @ present in r2p2
mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register
orreq r10, r10, #1 << 6 @ set bit #6
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
3: mov r10, #0
#ifdef HARVARD_CACHE
@ -365,7 +373,7 @@ __v7_ca9mp_proc_info:
b __v7_ca9mp_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
.long cpu_v7_name
.long v7_processor_functions
.long v7wbi_tlb_fns

1
arch/arm/plat-omap/iommu.c
View file

@ -320,6 +320,7 @@ void flush_iotlb_page(struct iommu *obj, u32 da)
if ((start <= da) && (da < start + bytes)) {
dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
__func__, start, da, bytes);
iotlb_load_cr(obj, &cr);
iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
}
}

1
arch/arm/plat-samsung/adc.c
View file

@ -435,7 +435,6 @@ static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state)
static int s3c_adc_resume(struct platform_device *pdev)
{
struct adc_device *adc = platform_get_drvdata(pdev);
unsigned long flags;
clk_enable(adc->clk);
enable_irq(adc->irq);

27
arch/arm/plat-samsung/clock.c
View file

@ -48,6 +48,9 @@
#include <plat/clock.h>
#include <plat/cpu.h>
#include <linux/serial_core.h>
#include <plat/regs-serial.h> /* for s3c24xx_uart_devs */
/* clock information */
static LIST_HEAD(clocks);
@ -65,6 +68,28 @@ static int clk_null_enable(struct clk *clk, int enable)
return 0;
}
static int dev_is_s3c_uart(struct device *dev)
{
struct platform_device **pdev = s3c24xx_uart_devs;
int i;
for (i = 0; i < ARRAY_SIZE(s3c24xx_uart_devs); i++, pdev++)
if (*pdev && dev == &(*pdev)->dev)
return 1;
return 0;
}
/*
* Serial drivers call get_clock() very early, before platform bus
* has been set up, this requires a special check to let them get
* a proper clock
*/
static int dev_is_platform_device(struct device *dev)
{
return dev->bus == &platform_bus_type ||
(dev->bus == NULL && dev_is_s3c_uart(dev));
}
/* Clock API calls */
struct clk *clk_get(struct device *dev, const char *id)
@ -73,7 +98,7 @@ struct clk *clk_get(struct device *dev, const char *id)
struct clk *clk = ERR_PTR(-ENOENT);
int idno;
if (dev == NULL || dev->bus != &platform_bus_type)
if (dev == NULL || !dev_is_platform_device(dev))
idno = -1;
else
idno = to_platform_device(dev)->id;

81
arch/blackfin/include/asm/bfin5xx_spi.h
View file

@ -11,26 +11,17 @@
#define MIN_SPI_BAUD_VAL 2
#define SPI_READ 0
#define SPI_WRITE 1
#define SPI_CTRL_OFF 0x0
#define SPI_FLAG_OFF 0x4
#define SPI_STAT_OFF 0x8
#define SPI_TXBUFF_OFF 0xc
#define SPI_RXBUFF_OFF 0x10
#define SPI_BAUD_OFF 0x14
#define SPI_SHAW_OFF 0x18
#define BIT_CTL_ENABLE 0x4000
#define BIT_CTL_OPENDRAIN 0x2000
#define BIT_CTL_MASTER 0x1000
#define BIT_CTL_POLAR 0x0800
#define BIT_CTL_PHASE 0x0400
#define BIT_CTL_BITORDER 0x0200
#define BIT_CTL_CPOL 0x0800
#define BIT_CTL_CPHA 0x0400
#define BIT_CTL_LSBF 0x0200
#define BIT_CTL_WORDSIZE 0x0100
#define BIT_CTL_MISOENABLE 0x0020
#define BIT_CTL_EMISO 0x0020
#define BIT_CTL_PSSE 0x0010
#define BIT_CTL_GM 0x0008
#define BIT_CTL_SZ 0x0004
#define BIT_CTL_RXMOD 0x0000
#define BIT_CTL_TXMOD 0x0001
#define BIT_CTL_TIMOD_DMA_TX 0x0003
@ -50,61 +41,7 @@
#define BIT_STU_SENDOVER 0x0001
#define BIT_STU_RECVFULL 0x0020
#define CFG_SPI_ENABLE 1
#define CFG_SPI_DISABLE 0
#define CFG_SPI_OUTENABLE 1
#define CFG_SPI_OUTDISABLE 0
#define CFG_SPI_ACTLOW 1
#define CFG_SPI_ACTHIGH 0
#define CFG_SPI_PHASESTART 1
#define CFG_SPI_PHASEMID 0
#define CFG_SPI_MASTER 1
#define CFG_SPI_SLAVE 0
#define CFG_SPI_SENELAST 0
#define CFG_SPI_SENDZERO 1
#define CFG_SPI_RCVFLUSH 1
#define CFG_SPI_RCVDISCARD 0
#define CFG_SPI_LSBFIRST 1
#define CFG_SPI_MSBFIRST 0
#define CFG_SPI_WORDSIZE16 1
#define CFG_SPI_WORDSIZE8 0
#define CFG_SPI_MISOENABLE 1
#define CFG_SPI_MISODISABLE 0
#define CFG_SPI_READ 0x00
#define CFG_SPI_WRITE 0x01
#define CFG_SPI_DMAREAD 0x02
#define CFG_SPI_DMAWRITE 0x03
#define CFG_SPI_CSCLEARALL 0
#define CFG_SPI_CHIPSEL1 1
#define CFG_SPI_CHIPSEL2 2
#define CFG_SPI_CHIPSEL3 3
#define CFG_SPI_CHIPSEL4 4
#define CFG_SPI_CHIPSEL5 5
#define CFG_SPI_CHIPSEL6 6
#define CFG_SPI_CHIPSEL7 7
#define CFG_SPI_CS1VALUE 1
#define CFG_SPI_CS2VALUE 2
#define CFG_SPI_CS3VALUE 3
#define CFG_SPI_CS4VALUE 4
#define CFG_SPI_CS5VALUE 5
#define CFG_SPI_CS6VALUE 6
#define CFG_SPI_CS7VALUE 7
#define CMD_SPI_SET_BAUDRATE 2
#define CMD_SPI_GET_SYSTEMCLOCK 25
#define CMD_SPI_SET_WRITECONTINUOUS 26
#define MAX_CTRL_CS 8 /* cs in spi controller */
/* device.platform_data for SSP controller devices */
struct bfin5xx_spi_master {
@ -120,9 +57,7 @@ struct bfin5xx_spi_chip {
u16 ctl_reg;
u8 enable_dma;
u8 bits_per_word;
u8 cs_change_per_word;
u16 cs_chg_udelay; /* Some devices require 16-bit delays */
u32 cs_gpio;
/* Value to send if no TX value is supplied, usually 0x0 or 0xFFFF */
u16 idle_tx_val;
u8 pio_interrupt; /* Enable spi data irq */

4
arch/m32r/include/asm/elf.h
View file

@ -82,9 +82,9 @@ typedef elf_fpreg_t elf_fpregset_t;
* These are used to set parameters in the core dumps.
*/
#define ELF_CLASS ELFCLASS32
#if defined(__LITTLE_ENDIAN)
#if defined(__LITTLE_ENDIAN__)
#define ELF_DATA ELFDATA2LSB
#elif defined(__BIG_ENDIAN)
#elif defined(__BIG_ENDIAN__)
#define ELF_DATA ELFDATA2MSB
#else
#error no endian defined

1
arch/m32r/kernel/.gitignore vendored Normal file
View file

@ -0,0 +1 @@
vmlinux.lds

4
arch/m32r/kernel/signal.c
View file

@ -28,6 +28,8 @@
#define DEBUG_SIG 0
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
asmlinkage int
sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
unsigned long r2, unsigned long r3, unsigned long r4,
@ -254,7 +256,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
static int prev_insn(struct pt_regs *regs)
{
u16 inst;
if (get_user(&inst, (u16 __user *)(regs->bpc - 2)))
if (get_user(inst, (u16 __user *)(regs->bpc - 2)))
return -EFAULT;
if ((inst & 0xfff0) == 0x10f0) /* trap ? */
regs->bpc -= 2;

1
arch/mips/include/asm/siginfo.h
View file

@ -88,6 +88,7 @@ typedef struct siginfo {
#ifdef __ARCH_SI_TRAPNO
int _trapno; /* TRAP # which caused the signal */
#endif
short _addr_lsb;
} _sigfault;
/* SIGPOLL, SIGXFSZ (To do ...) */

14
arch/um/drivers/hostaudio_kern.c
View file

@ -40,6 +40,11 @@ static char *mixer = HOSTAUDIO_DEV_MIXER;
" This is used to specify the host mixer device to the hostaudio driver.\n"\
" The default is \"" HOSTAUDIO_DEV_MIXER "\".\n\n"
module_param(dsp, charp, 0644);
MODULE_PARM_DESC(dsp, DSP_HELP);
module_param(mixer, charp, 0644);
MODULE_PARM_DESC(mixer, MIXER_HELP);
#ifndef MODULE
static int set_dsp(char *name, int *add)
{
@ -56,15 +61,6 @@ static int set_mixer(char *name, int *add)
}
__uml_setup("mixer=", set_mixer, "mixer=<mixer device>\n" MIXER_HELP);
#else /*MODULE*/
module_param(dsp, charp, 0644);
MODULE_PARM_DESC(dsp, DSP_HELP);
module_param(mixer, charp, 0644);
MODULE_PARM_DESC(mixer, MIXER_HELP);
#endif
/* /dev/dsp file operations */

9
arch/um/drivers/ubd_kern.c
View file

@ -163,6 +163,7 @@ struct ubd {
struct scatterlist sg[MAX_SG];
struct request *request;
int start_sg, end_sg;
sector_t rq_pos;
};
#define DEFAULT_COW { \
@ -187,6 +188,7 @@ struct ubd {
.request = NULL, \
.start_sg = 0, \
.end_sg = 0, \
.rq_pos = 0, \
}
/* Protected by ubd_lock */
@ -1228,7 +1230,6 @@ static void do_ubd_request(struct request_queue *q)
{
struct io_thread_req *io_req;
struct request *req;
sector_t sector;
int n;
while(1){
@ -1239,12 +1240,12 @@ static void do_ubd_request(struct request_queue *q)
return;
dev->request = req;
dev->rq_pos = blk_rq_pos(req);
dev->start_sg = 0;
dev->end_sg = blk_rq_map_sg(q, req, dev->sg);
}
req = dev->request;
sector = blk_rq_pos(req);
while(dev->start_sg < dev->end_sg){
struct scatterlist *sg = &dev->sg[dev->start_sg];
@ -1256,10 +1257,9 @@ static void do_ubd_request(struct request_queue *q)
return;
}
prepare_request(req, io_req,
(unsigned long long)sector << 9,
(unsigned long long)dev->rq_pos << 9,
sg->offset, sg->length, sg_page(sg));
sector += sg->length >> 9;
n = os_write_file(thread_fd, &io_req,
sizeof(struct io_thread_req *));
if(n != sizeof(struct io_thread_req *)){
@ -1272,6 +1272,7 @@ static void do_ubd_request(struct request_queue *q)
return;
}
dev->rq_pos += sg->length >> 9;
dev->start_sg++;
}
dev->end_sg = 0;

22
arch/x86/ia32/ia32_aout.c
View file

@ -34,7 +34,7 @@
#include <asm/ia32.h>
#undef WARN_OLD
#undef CORE_DUMP /* probably broken */
#undef CORE_DUMP /* definitely broken */
static int load_aout_binary(struct linux_binprm *, struct pt_regs *regs);
static int load_aout_library(struct file *);
@ -131,21 +131,15 @@ static void set_brk(unsigned long start, unsigned long end)
* macros to write out all the necessary info.
*/
static int dump_write(struct file *file, const void *addr, int nr)
{
return file->f_op->write(file, addr, nr, &file->f_pos) == nr;
}
#include <linux/coredump.h>
#define DUMP_WRITE(addr, nr) \
if (!dump_write(file, (void *)(addr), (nr))) \
goto end_coredump;
#define DUMP_SEEK(offset) \
if (file->f_op->llseek) { \
if (file->f_op->llseek(file, (offset), 0) != (offset)) \
goto end_coredump; \
} else \
file->f_pos = (offset)
#define DUMP_SEEK(offset) \
if (!dump_seek(file, offset)) \
goto end_coredump;
#define START_DATA() (u.u_tsize << PAGE_SHIFT)
#define START_STACK(u) (u.start_stack)
@ -217,12 +211,6 @@ static int aout_core_dump(long signr, struct pt_regs *regs, struct file *file,
dump_size = dump.u_ssize << PAGE_SHIFT;
DUMP_WRITE(dump_start, dump_size);
}
/*
* Finally dump the task struct. Not be used by gdb, but
* could be useful
*/
set_fs(KERNEL_DS);
DUMP_WRITE(current, sizeof(*current));
end_coredump:
set_fs(fs);
return has_dumped;

9
arch/x86/kernel/cpu/mcheck/mce_amd.c
View file

@ -141,6 +141,7 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)
address = (low & MASK_BLKPTR_LO) >> 21;
if (!address)
break;
address += MCG_XBLK_ADDR;
} else
++address;
@ -148,12 +149,8 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)
if (rdmsr_safe(address, &low, &high))
break;
if (!(high & MASK_VALID_HI)) {
if (block)
continue;
else
break;
}
if (!(high & MASK_VALID_HI))
continue;
if (!(high & MASK_CNTP_HI) ||
(high & MASK_LOCKED_HI))

3
arch/x86/kernel/cpu/mcheck/therm_throt.c
View file

@ -216,7 +216,7 @@ static __cpuinit int thermal_throttle_add_dev(struct sys_device *sys_dev,
err = sysfs_add_file_to_group(&sys_dev->kobj,
&attr_core_power_limit_count.attr,
thermal_attr_group.name);
if (cpu_has(c, X86_FEATURE_PTS))
if (cpu_has(c, X86_FEATURE_PTS)) {
err = sysfs_add_file_to_group(&sys_dev->kobj,
&attr_package_throttle_count.attr,
thermal_attr_group.name);
@ -224,6 +224,7 @@ static __cpuinit int thermal_throttle_add_dev(struct sys_device *sys_dev,
err = sysfs_add_file_to_group(&sys_dev->kobj,
&attr_package_power_limit_count.attr,
thermal_attr_group.name);
}
return err;
}

2
arch/x86/kvm/svm.c
View file

@ -766,7 +766,6 @@ static void init_vmcb(struct vcpu_svm *svm)
control->iopm_base_pa = iopm_base;
control->msrpm_base_pa = __pa(svm->msrpm);
control->tsc_offset = 0;
control->int_ctl = V_INTR_MASKING_MASK;
init_seg(&save->es);
@ -902,6 +901,7 @@ static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id)
svm->vmcb_pa = page_to_pfn(page) << PAGE_SHIFT;
svm->asid_generation = 0;
init_vmcb(svm);
svm->vmcb->control.tsc_offset = 0-native_read_tsc();
err = fx_init(&svm->vcpu);
if (err)

8
arch/x86/mm/srat_64.c
View file

@ -420,9 +420,11 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end)
return -1;
}
for_each_node_mask(i, nodes_parsed)
e820_register_active_regions(i, nodes[i].start >> PAGE_SHIFT,
nodes[i].end >> PAGE_SHIFT);
for (i = 0; i < num_node_memblks; i++)
e820_register_active_regions(memblk_nodeid[i],
node_memblk_range[i].start >> PAGE_SHIFT,
node_memblk_range[i].end >> PAGE_SHIFT);
/* for out of order entries in SRAT */
sort_node_map();
if (!nodes_cover_memory(nodes)) {

12
block/elevator.c
View file

@ -938,6 +938,7 @@ int elv_register_queue(struct request_queue *q)
}
}
kobject_uevent(&e->kobj, KOBJ_ADD);
e->registered = 1;
}
return error;
}
@ -947,6 +948,7 @@ static void __elv_unregister_queue(struct elevator_queue *e)
{
kobject_uevent(&e->kobj, KOBJ_REMOVE);
kobject_del(&e->kobj);
e->registered = 0;
}
void elv_unregister_queue(struct request_queue *q)
@ -1042,11 +1044,13 @@ static int elevator_switch(struct request_queue *q, struct elevator_type *new_e)
spin_unlock_irq(q->queue_lock);
__elv_unregister_queue(old_elevator);
if (old_elevator->registered) {
__elv_unregister_queue(old_elevator);
err = elv_register_queue(q);
if (err)
goto fail_register;
err = elv_register_queue(q);
if (err)
goto fail_register;
}
/*
* finally exit old elevator and turn off BYPASS.

17
drivers/acpi/blacklist.c
View file

@ -204,6 +204,23 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
},
},
{
/*
* There have a NVIF method in MSI GX723 DSDT need call by Nvidia
* driver (e.g. nouveau) when user press brightness hotkey.
* Currently, nouveau driver didn't do the job and it causes there
* have a infinite while loop in DSDT when user press hotkey.
* We add MSI GX723's dmi information to this table for workaround
* this issue.
* Will remove MSI GX723 from the table after nouveau grows support.
*/
.callback = dmi_disable_osi_vista,
.ident = "MSI GX723",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"),
DMI_MATCH(DMI_PRODUCT_NAME, "GX723"),
},
},
{
.callback = dmi_disable_osi_vista,
.ident = "Sony VGN-NS10J_S",
.matches = {

1
drivers/acpi/processor_core.c
View file

@ -346,4 +346,5 @@ void __init acpi_early_processor_set_pdc(void)
acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX,
early_init_pdc, NULL, NULL, NULL);
acpi_get_devices("ACPI0007", early_init_pdc, NULL, NULL);
}

6
drivers/atm/iphase.c
View file

@ -3156,7 +3156,6 @@ static int __devinit ia_init_one(struct pci_dev *pdev,
{
struct atm_dev *dev;
IADEV *iadev;
unsigned long flags;
int ret;
iadev = kzalloc(sizeof(*iadev), GFP_KERNEL);
@ -3188,19 +3187,14 @@ static int __devinit ia_init_one(struct pci_dev *pdev,
ia_dev[iadev_count] = iadev;
_ia_dev[iadev_count] = dev;
iadev_count++;
spin_lock_init(&iadev->misc_lock);
/* First fixes first. I don't want to think about this now. */
spin_lock_irqsave(&iadev->misc_lock, flags);
if (ia_init(dev) || ia_start(dev)) {
IF_INIT(printk("IA register failed!\n");)
iadev_count--;
ia_dev[iadev_count] = NULL;
_ia_dev[iadev_count] = NULL;
spin_unlock_irqrestore(&iadev->misc_lock, flags);
ret = -EINVAL;
goto err_out_deregister_dev;
}
spin_unlock_irqrestore(&iadev->misc_lock, flags);
IF_EVENT(printk("iadev_count = %d\n", iadev_count);)
iadev->next_board = ia_boards;

2
drivers/atm/iphase.h
View file

@ -1022,7 +1022,7 @@ typedef struct iadev_t {
struct dle_q rx_dle_q;
struct free_desc_q *rx_free_desc_qhead;
struct sk_buff_head rx_dma_q;
spinlock_t rx_lock, misc_lock;
spinlock_t rx_lock;
struct atm_vcc **rx_open; /* list of all open VCs */
u16 num_rx_desc, rx_buf_sz, rxing;
u32 rx_pkt_ram, rx_tmp_cnt;

8
drivers/atm/solos-pci.c
View file

@ -444,6 +444,7 @@ static ssize_t console_show(struct device *dev, struct device_attribute *attr,
struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
struct solos_card *card = atmdev->dev_data;
struct sk_buff *skb;
unsigned int len;
spin_lock(&card->cli_queue_lock);
skb = skb_dequeue(&card->cli_queue[SOLOS_CHAN(atmdev)]);
@ -451,11 +452,12 @@ static ssize_t console_show(struct device *dev, struct device_attribute *attr,
if(skb == NULL)
return sprintf(buf, "No data.\n");
memcpy(buf, skb->data, skb->len);
dev_dbg(&card->dev->dev, "len: %d\n", skb->len);
len = skb->len;
memcpy(buf, skb->data, len);
dev_dbg(&card->dev->dev, "len: %d\n", len);
kfree_skb(skb);
return skb->len;
return len;
}
static int send_command(struct solos_card *card, int dev, const char *buf, size_t size)

2
drivers/block/ps3disk.c
View file

@ -113,7 +113,7 @@ static void ps3disk_scatter_gather(struct ps3_storage_device *dev,
memcpy(buf, dev->bounce_buf+offset, size);
offset += size;
flush_kernel_dcache_page(bvec->bv_page);
bvec_kunmap_irq(bvec, &flags);
bvec_kunmap_irq(buf, &flags);
i++;
}
}

6
drivers/block/virtio_blk.c
View file

@ -202,6 +202,7 @@ static int virtblk_get_id(struct gendisk *disk, char *id_str)
struct virtio_blk *vblk = disk->private_data;
struct request *req;
struct bio *bio;
int err;
bio = bio_map_kern(vblk->disk->queue, id_str, VIRTIO_BLK_ID_BYTES,
GFP_KERNEL);
@ -215,7 +216,10 @@ static int virtblk_get_id(struct gendisk *disk, char *id_str)
}
req->cmd_type = REQ_TYPE_SPECIAL;
return blk_execute_rq(vblk->disk->queue, vblk->disk, req, false);
err = blk_execute_rq(vblk->disk->queue, vblk->disk, req, false);
blk_put_request(req);
return err;
}
static int virtblk_locked_ioctl(struct block_device *bdev, fmode_t mode,

2
drivers/dma/ioat/dma_v2.c
View file

@ -879,7 +879,7 @@ int __devinit ioat2_dma_probe(struct ioatdma_device *device, int dca)
dma->device_issue_pending = ioat2_issue_pending;
dma->device_alloc_chan_resources = ioat2_alloc_chan_resources;
dma->device_free_chan_resources = ioat2_free_chan_resources;
dma->device_tx_status = ioat_tx_status;
dma->device_tx_status = ioat_dma_tx_status;
err = ioat_probe(device);
if (err)

3
drivers/gpu/drm/i915/i915_dma.c
View file

@ -2231,6 +2231,9 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
dev_priv->mchdev_lock = &mchdev_lock;
spin_unlock(&mchdev_lock);
/* XXX Prevent module unload due to memory corruption bugs. */
__module_get(THIS_MODULE);
return 0;
out_workqueue_free:

2
drivers/gpu/drm/i915/intel_fb.c
View file

@ -238,8 +238,8 @@ int intel_fbdev_destroy(struct drm_device *dev,
drm_framebuffer_cleanup(&ifb->base);
if (ifb->obj) {
drm_gem_object_handle_unreference(ifb->obj);
drm_gem_object_unreference(ifb->obj);
ifb->obj = NULL;
}
return 0;

1
drivers/gpu/drm/nouveau/nouveau_fbcon.c
View file

@ -352,7 +352,6 @@ nouveau_fbcon_destroy(struct drm_device *dev, struct nouveau_fbdev *nfbdev)
if (nouveau_fb->nvbo) {
nouveau_bo_unmap(nouveau_fb->nvbo);
drm_gem_object_handle_unreference_unlocked(nouveau_fb->nvbo->gem);
drm_gem_object_unreference_unlocked(nouveau_fb->nvbo->gem);
nouveau_fb->nvbo = NULL;
}

1
drivers/gpu/drm/nouveau/nouveau_notifier.c
View file

@ -79,7 +79,6 @@ nouveau_notifier_takedown_channel(struct nouveau_channel *chan)
mutex_lock(&dev->struct_mutex);
nouveau_bo_unpin(chan->notifier_bo);
mutex_unlock(&dev->struct_mutex);
drm_gem_object_handle_unreference_unlocked(chan->notifier_bo->gem);
drm_gem_object_unreference_unlocked(chan->notifier_bo->gem);
drm_mm_takedown(&chan->notifier_heap);
}

5
drivers/gpu/drm/radeon/evergreen.c
View file

@ -1137,7 +1137,7 @@ static void evergreen_gpu_init(struct radeon_device *rdev)
WREG32(RCU_IND_INDEX, 0x203);
efuse_straps_3 = RREG32(RCU_IND_DATA);
efuse_box_bit_127_124 = (u8)(efuse_straps_3 & 0xF0000000) >> 28;
efuse_box_bit_127_124 = (u8)((efuse_straps_3 & 0xF0000000) >> 28);
switch(efuse_box_bit_127_124) {
case 0x0:
@ -1407,6 +1407,7 @@ int evergreen_mc_init(struct radeon_device *rdev)
rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024;
rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024;
rdev->mc.visible_vram_size = rdev->mc.aper_size;
rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
r600_vram_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);
@ -1520,7 +1521,7 @@ void evergreen_disable_interrupt_state(struct radeon_device *rdev)
{
u32 tmp;
WREG32(CP_INT_CNTL, 0);
WREG32(CP_INT_CNTL, CNTX_BUSY_INT_ENABLE | CNTX_EMPTY_INT_ENABLE);
WREG32(GRBM_INT_CNTL, 0);
WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);

3
drivers/gpu/drm/radeon/r100.c
View file

@ -1030,6 +1030,7 @@ int r100_cp_init(struct radeon_device *rdev, unsigned ring_size)
return r;
}
rdev->cp.ready = true;
rdev->mc.active_vram_size = rdev->mc.real_vram_size;
return 0;
}
@ -1047,6 +1048,7 @@ void r100_cp_fini(struct radeon_device *rdev)
void r100_cp_disable(struct radeon_device *rdev)
{
/* Disable ring */
rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
rdev->cp.ready = false;
WREG32(RADEON_CP_CSQ_MODE, 0);
WREG32(RADEON_CP_CSQ_CNTL, 0);
@ -2295,6 +2297,7 @@ void r100_vram_init_sizes(struct radeon_device *rdev)
/* FIXME we don't use the second aperture yet when we could use it */
if (rdev->mc.visible_vram_size > rdev->mc.aper_size)
rdev->mc.visible_vram_size = rdev->mc.aper_size;
rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
config_aper_size = RREG32(RADEON_CONFIG_APER_SIZE);
if (rdev->flags & RADEON_IS_IGP) {
uint32_t tom;

4
drivers/gpu/drm/radeon/r600.c
View file

@ -1248,6 +1248,7 @@ int r600_mc_init(struct radeon_device *rdev)
rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE);
rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE);
rdev->mc.visible_vram_size = rdev->mc.aper_size;
rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
r600_vram_gtt_location(rdev, &rdev->mc);
if (rdev->flags & RADEON_IS_IGP) {
@ -1917,6 +1918,7 @@ void r600_pciep_wreg(struct radeon_device *rdev, u32 reg, u32 v)
*/
void r600_cp_stop(struct radeon_device *rdev)
{
rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
WREG32(R_0086D8_CP_ME_CNTL, S_0086D8_CP_ME_HALT(1));
}
@ -2910,7 +2912,7 @@ static void r600_disable_interrupt_state(struct radeon_device *rdev)
{
u32 tmp;
WREG32(CP_INT_CNTL, 0);
WREG32(CP_INT_CNTL, CNTX_BUSY_INT_ENABLE | CNTX_EMPTY_INT_ENABLE);
WREG32(GRBM_INT_CNTL, 0);
WREG32(DxMODE_INT_MASK, 0);
if (ASIC_IS_DCE3(rdev)) {

2
drivers/gpu/drm/radeon/r600_blit_kms.c
View file

@ -532,6 +532,7 @@ int r600_blit_init(struct radeon_device *rdev)
memcpy(ptr + rdev->r600_blit.ps_offset, r6xx_ps, r6xx_ps_size * 4);
radeon_bo_kunmap(rdev->r600_blit.shader_obj);
radeon_bo_unreserve(rdev->r600_blit.shader_obj);
rdev->mc.active_vram_size = rdev->mc.real_vram_size;
return 0;
}
@ -539,6 +540,7 @@ void r600_blit_fini(struct radeon_device *rdev)
{
int r;
rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
if (rdev->r600_blit.shader_obj == NULL)
return;
/* If we can't reserve the bo, unref should be enough to destroy

1
drivers/gpu/drm/radeon/radeon.h
View file

@ -344,6 +344,7 @@ struct radeon_mc {
* about vram size near mc fb location */
u64 mc_vram_size;
u64 visible_vram_size;
u64 active_vram_size;
u64 gtt_size;
u64 gtt_start;
u64 gtt_end;

18
drivers/gpu/drm/radeon/radeon_atombios.c
View file

@ -1558,39 +1558,39 @@ radeon_atombios_get_tv_info(struct radeon_device *rdev)
switch (tv_info->ucTV_BootUpDefaultStandard) {
case ATOM_TV_NTSC:
tv_std = TV_STD_NTSC;
DRM_INFO("Default TV standard: NTSC\n");
DRM_DEBUG_KMS("Default TV standard: NTSC\n");
break;
case ATOM_TV_NTSCJ:
tv_std = TV_STD_NTSC_J;
DRM_INFO("Default TV standard: NTSC-J\n");
DRM_DEBUG_KMS("Default TV standard: NTSC-J\n");
break;
case ATOM_TV_PAL:
tv_std = TV_STD_PAL;
DRM_INFO("Default TV standard: PAL\n");
DRM_DEBUG_KMS("Default TV standard: PAL\n");
break;
case ATOM_TV_PALM:
tv_std = TV_STD_PAL_M;
DRM_INFO("Default TV standard: PAL-M\n");
DRM_DEBUG_KMS("Default TV standard: PAL-M\n");
break;
case ATOM_TV_PALN:
tv_std = TV_STD_PAL_N;
DRM_INFO("Default TV standard: PAL-N\n");
DRM_DEBUG_KMS("Default TV standard: PAL-N\n");
break;
case ATOM_TV_PALCN:
tv_std = TV_STD_PAL_CN;
DRM_INFO("Default TV standard: PAL-CN\n");
DRM_DEBUG_KMS("Default TV standard: PAL-CN\n");
break;
case ATOM_TV_PAL60:
tv_std = TV_STD_PAL_60;
DRM_INFO("Default TV standard: PAL-60\n");
DRM_DEBUG_KMS("Default TV standard: PAL-60\n");
break;
case ATOM_TV_SECAM:
tv_std = TV_STD_SECAM;
DRM_INFO("Default TV standard: SECAM\n");
DRM_DEBUG_KMS("Default TV standard: SECAM\n");
break;
default:
tv_std = TV_STD_NTSC;
DRM_INFO("Unknown TV standard; defaulting to NTSC\n");
DRM_DEBUG_KMS("Unknown TV standard; defaulting to NTSC\n");
break;
}
}

26
drivers/gpu/drm/radeon/radeon_combios.c
View file

@ -913,47 +913,47 @@ radeon_combios_get_tv_info(struct radeon_device *rdev)
switch (RBIOS8(tv_info + 7) & 0xf) {
case 1:
tv_std = TV_STD_NTSC;
DRM_INFO("Default TV standard: NTSC\n");
DRM_DEBUG_KMS("Default TV standard: NTSC\n");
break;
case 2:
tv_std = TV_STD_PAL;
DRM_INFO("Default TV standard: PAL\n");
DRM_DEBUG_KMS("Default TV standard: PAL\n");
break;
case 3:
tv_std = TV_STD_PAL_M;
DRM_INFO("Default TV standard: PAL-M\n");
DRM_DEBUG_KMS("Default TV standard: PAL-M\n");
break;
case 4:
tv_std = TV_STD_PAL_60;
DRM_INFO("Default TV standard: PAL-60\n");
DRM_DEBUG_KMS("Default TV standard: PAL-60\n");
break;
case 5:
tv_std = TV_STD_NTSC_J;
DRM_INFO("Default TV standard: NTSC-J\n");
DRM_DEBUG_KMS("Default TV standard: NTSC-J\n");
break;
case 6:
tv_std = TV_STD_SCART_PAL;
DRM_INFO("Default TV standard: SCART-PAL\n");
DRM_DEBUG_KMS("Default TV standard: SCART-PAL\n");
break;
default:
tv_std = TV_STD_NTSC;
DRM_INFO
DRM_DEBUG_KMS
("Unknown TV standard; defaulting to NTSC\n");
break;
}
switch ((RBIOS8(tv_info + 9) >> 2) & 0x3) {
case 0:
DRM_INFO("29.498928713 MHz TV ref clk\n");
DRM_DEBUG_KMS("29.498928713 MHz TV ref clk\n");
break;
case 1:
DRM_INFO("28.636360000 MHz TV ref clk\n");
DRM_DEBUG_KMS("28.636360000 MHz TV ref clk\n");
break;
case 2:
DRM_INFO("14.318180000 MHz TV ref clk\n");
DRM_DEBUG_KMS("14.318180000 MHz TV ref clk\n");
break;
case 3:
DRM_INFO("27.000000000 MHz TV ref clk\n");
DRM_DEBUG_KMS("27.000000000 MHz TV ref clk\n");
break;
default:
break;
@ -1324,7 +1324,7 @@ bool radeon_legacy_get_tmds_info_from_combios(struct radeon_encoder *encoder,
if (tmds_info) {
ver = RBIOS8(tmds_info);
DRM_INFO("DFP table revision: %d\n", ver);
DRM_DEBUG_KMS("DFP table revision: %d\n", ver);
if (ver == 3) {
n = RBIOS8(tmds_info + 5) + 1;
if (n > 4)
@ -1408,7 +1408,7 @@ bool radeon_legacy_get_ext_tmds_info_from_combios(struct radeon_encoder *encoder
offset = combios_get_table_offset(dev, COMBIOS_EXT_TMDS_INFO_TABLE);
if (offset) {
ver = RBIOS8(offset);
DRM_INFO("External TMDS Table revision: %d\n", ver);
DRM_DEBUG_KMS("External TMDS Table revision: %d\n", ver);
tmds->slave_addr = RBIOS8(offset + 4 + 2);
tmds->slave_addr >>= 1; /* 7 bit addressing */
gpio = RBIOS8(offset + 4 + 3);

1
drivers/gpu/drm/radeon/radeon_fb.c
View file

@ -97,7 +97,6 @@ static void radeonfb_destroy_pinned_object(struct drm_gem_object *gobj)
radeon_bo_unpin(rbo);
radeon_bo_unreserve(rbo);
}
drm_gem_object_handle_unreference(gobj);
drm_gem_object_unreference_unlocked(gobj);
}

2
drivers/gpu/drm/radeon/radeon_object.c
View file

@ -69,7 +69,7 @@ void radeon_ttm_placement_from_domain(struct radeon_bo *rbo, u32 domain)
u32 c = 0;
rbo->placement.fpfn = 0;
rbo->placement.lpfn = 0;
rbo->placement.lpfn = rbo->rdev->mc.active_vram_size >> PAGE_SHIFT;
rbo->placement.placement = rbo->placements;
rbo->placement.busy_placement = rbo->placements;
if (domain & RADEON_GEM_DOMAIN_VRAM)

5
drivers/gpu/drm/radeon/radeon_object.h
View file

@ -124,11 +124,8 @@ static inline int radeon_bo_wait(struct radeon_bo *bo, u32 *mem_type,
int r;
r = ttm_bo_reserve(&bo->tbo, true, no_wait, false, 0);
if (unlikely(r != 0)) {
if (r != -ERESTARTSYS)
dev_err(bo->rdev->dev, "%p reserve failed for wait\n", bo);
if (unlikely(r != 0))
return r;
}
spin_lock(&bo->tbo.lock);
if (mem_type)
*mem_type = bo->tbo.mem.mem_type;

1
drivers/gpu/drm/radeon/rs600.c
View file

@ -693,6 +693,7 @@ void rs600_mc_init(struct radeon_device *rdev)
rdev->mc.real_vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
rdev->mc.mc_vram_size = rdev->mc.real_vram_size;
rdev->mc.visible_vram_size = rdev->mc.aper_size;
rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
base = RREG32_MC(R_000004_MC_FB_LOCATION);
base = G_000004_MC_FB_START(base) << 16;

1
drivers/gpu/drm/radeon/rs690.c
View file

@ -157,6 +157,7 @@ void rs690_mc_init(struct radeon_device *rdev)
rdev->mc.aper_base = pci_resource_start(rdev->pdev, 0);
rdev->mc.aper_size = pci_resource_len(rdev->pdev, 0);
rdev->mc.visible_vram_size = rdev->mc.aper_size;
rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
base = RREG32_MC(R_000100_MCCFG_FB_LOCATION);
base = G_000100_MC_FB_START(base) << 16;
rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);

2
drivers/gpu/drm/radeon/rv770.c
View file

@ -267,6 +267,7 @@ static void rv770_mc_program(struct radeon_device *rdev)
*/
void r700_cp_stop(struct radeon_device *rdev)
{
rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
WREG32(CP_ME_CNTL, (CP_ME_HALT | CP_PFP_HALT));
}
@ -992,6 +993,7 @@ int rv770_mc_init(struct radeon_device *rdev)
rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE);
rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE);
rdev->mc.visible_vram_size = rdev->mc.aper_size;
rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
r600_vram_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);

83
drivers/gpu/drm/ttm/ttm_bo.c
View file

@ -441,6 +441,43 @@ static int ttm_bo_handle_move_mem(struct ttm_buffer_object *bo,
return ret;
}
/**
* Call bo::reserved and with the lru lock held.
* Will release GPU memory type usage on destruction.
* This is the place to put in driver specific hooks.
* Will release the bo::reserved lock and the
* lru lock on exit.
*/
static void ttm_bo_cleanup_memtype_use(struct ttm_buffer_object *bo)
{
struct ttm_bo_global *glob = bo->glob;
if (bo->ttm) {
/**
* Release the lru_lock, since we don't want to have
* an atomic requirement on ttm_tt[unbind|destroy].
*/
spin_unlock(&glob->lru_lock);
ttm_tt_unbind(bo->ttm);
ttm_tt_destroy(bo->ttm);
bo->ttm = NULL;
spin_lock(&glob->lru_lock);
}
if (bo->mem.mm_node) {
drm_mm_put_block(bo->mem.mm_node);
bo->mem.mm_node = NULL;
}
atomic_set(&bo->reserved, 0);
wake_up_all(&bo->event_queue);
spin_unlock(&glob->lru_lock);
}
/**
* If bo idle, remove from delayed- and lru lists, and unref.
* If not idle, and already on delayed list, do nothing.
@ -456,6 +493,7 @@ static int ttm_bo_cleanup_refs(struct ttm_buffer_object *bo, bool remove_all)
int ret;
spin_lock(&bo->lock);
retry:
(void) ttm_bo_wait(bo, false, false, !remove_all);
if (!bo->sync_obj) {
@ -464,31 +502,52 @@ static int ttm_bo_cleanup_refs(struct ttm_buffer_object *bo, bool remove_all)
spin_unlock(&bo->lock);
spin_lock(&glob->lru_lock);
put_count = ttm_bo_del_from_lru(bo);
ret = ttm_bo_reserve_locked(bo, false, !remove_all, false, 0);
ret = ttm_bo_reserve_locked(bo, false, false, false, 0);
BUG_ON(ret);
if (bo->ttm)
ttm_tt_unbind(bo->ttm);
/**
* Someone else has the object reserved. Bail and retry.
*/
if (unlikely(ret == -EBUSY)) {
spin_unlock(&glob->lru_lock);
spin_lock(&bo->lock);
goto requeue;
}
/**
* We can re-check for sync object without taking
* the bo::lock since setting the sync object requires
* also bo::reserved. A busy object at this point may
* be caused by another thread starting an accelerated
* eviction.
*/
if (unlikely(bo->sync_obj)) {
atomic_set(&bo->reserved, 0);
wake_up_all(&bo->event_queue);
spin_unlock(&glob->lru_lock);
spin_lock(&bo->lock);
if (remove_all)
goto retry;
else
goto requeue;
}
put_count = ttm_bo_del_from_lru(bo);
if (!list_empty(&bo->ddestroy)) {
list_del_init(&bo->ddestroy);
++put_count;
}
if (bo->mem.mm_node) {
drm_mm_put_block(bo->mem.mm_node);
bo->mem.mm_node = NULL;
}
spin_unlock(&glob->lru_lock);
atomic_set(&bo->reserved, 0);
ttm_bo_cleanup_memtype_use(bo);
while (put_count--)
kref_put(&bo->list_kref, ttm_bo_ref_bug);
return 0;
}
requeue:
spin_lock(&glob->lru_lock);
if (list_empty(&bo->ddestroy)) {
void *sync_obj = bo->sync_obj;

2
drivers/hid/hid-cando.c
View file

@ -237,6 +237,8 @@ static const struct hid_device_id cando_devices[] = {
USB_DEVICE_ID_CANDO_MULTI_TOUCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
USB_DEVICE_ID_CANDO_MULTI_TOUCH_15_6) },
{ }
};
MODULE_DEVICE_TABLE(hid, cando_devices);

1
drivers/hid/hid-core.c
View file

@ -1292,6 +1292,7 @@ static const struct hid_device_id hid_blacklist[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE_2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH_15_6) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION_SOLAR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) },

2
drivers/hid/hid-ids.h
View file

@ -134,6 +134,7 @@
#define USB_VENDOR_ID_CANDO 0x2087
#define USB_DEVICE_ID_CANDO_MULTI_TOUCH 0x0a01
#define USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6 0x0b03
#define USB_DEVICE_ID_CANDO_MULTI_TOUCH_15_6 0x0f01
#define USB_VENDOR_ID_CH 0x068e
#define USB_DEVICE_ID_CH_PRO_PEDALS 0x00f2
@ -503,6 +504,7 @@
#define USB_VENDOR_ID_TURBOX 0x062a
#define USB_DEVICE_ID_TURBOX_KEYBOARD 0x0201
#define USB_DEVICE_ID_TURBOX_TOUCHSCREEN_MOSART 0x7100
#define USB_VENDOR_ID_TWINHAN 0x6253
#define USB_DEVICE_ID_TWINHAN_IR_REMOTE 0x0100

11
drivers/hid/hidraw.c
View file

@ -109,6 +109,12 @@ static ssize_t hidraw_write(struct file *file, const char __user *buffer, size_t
int ret = 0;
mutex_lock(&minors_lock);
if (!hidraw_table[minor]) {
ret = -ENODEV;
goto out;
}
dev = hidraw_table[minor]->hid;
if (!dev->hid_output_raw_report) {
@ -244,6 +250,10 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd,
mutex_lock(&minors_lock);
dev = hidraw_table[minor];
if (!dev) {
ret = -ENODEV;
goto out;
}
switch (cmd) {
case HIDIOCGRDESCSIZE:
@ -317,6 +327,7 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd,
ret = -ENOTTY;
}
out:
mutex_unlock(&minors_lock);
return ret;
}

1
drivers/hid/usbhid/hid-quirks.c
View file

@ -36,6 +36,7 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_DWAV, USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER, HID_QUIRK_MULTI_INPUT | HID_QUIRK_NOGET },
{ USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_MOJO, USB_DEVICE_ID_RETRO_ADAPTER, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_TOUCHSCREEN_MOSART, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FLYING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },

5
drivers/i2c/busses/i2c-cpm.c
View file

@ -677,6 +677,11 @@ static int __devinit cpm_i2c_probe(struct platform_device *ofdev,
dev_dbg(&ofdev->dev, "hw routines for %s registered.\n",
cpm->adap.name);
/*
* register OF I2C devices
*/
of_i2c_register_devices(&cpm->adap);
return 0;
out_shut:
cpm_i2c_shutdown(cpm);

3
drivers/i2c/busses/i2c-ibm_iic.c
View file

@ -761,6 +761,9 @@ static int __devinit iic_probe(struct platform_device *ofdev,
dev_info(&ofdev->dev, "using %s mode\n",
dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
/* Now register all the child nodes */
of_i2c_register_devices(adap);
return 0;
error_cleanup:

1
drivers/i2c/busses/i2c-mpc.c
View file

@ -632,6 +632,7 @@ static int __devinit fsl_i2c_probe(struct platform_device *op,
dev_err(i2c->dev, "failed to add adapter\n");
goto fail_add;
}
of_i2c_register_devices(&i2c->adap);
return result;

12
drivers/i2c/busses/i2c-pca-isa.c
View file

@ -71,8 +71,8 @@ static int pca_isa_readbyte(void *pd, int reg)
static int pca_isa_waitforcompletion(void *pd)
{
long ret = ~0;
unsigned long timeout;
long ret;
if (irq > -1) {
ret = wait_event_timeout(pca_wait,
@ -81,11 +81,15 @@ static int pca_isa_waitforcompletion(void *pd)
} else {
/* Do polling */
timeout = jiffies + pca_isa_ops.timeout;
while (((pca_isa_readbyte(pd, I2C_PCA_CON)
& I2C_PCA_CON_SI) == 0)
&& (ret = time_before(jiffies, timeout)))
do {
ret = time_before(jiffies, timeout);
if (pca_isa_readbyte(pd, I2C_PCA_CON)
& I2C_PCA_CON_SI)
break;
udelay(100);
} while (ret);
}
return ret > 0;
}

11
drivers/i2c/busses/i2c-pca-platform.c
View file

@ -80,8 +80,8 @@ static void i2c_pca_pf_writebyte32(void *pd, int reg, int val)
static int i2c_pca_pf_waitforcompletion(void *pd)
{
struct i2c_pca_pf_data *i2c = pd;
long ret = ~0;
unsigned long timeout;
long ret;
if (i2c->irq) {
ret = wait_event_timeout(i2c->wait,
@ -90,10 +90,13 @@ static int i2c_pca_pf_waitforcompletion(void *pd)
} else {
/* Do polling */
timeout = jiffies + i2c->adap.timeout;
while (((i2c->algo_data.read_byte(i2c, I2C_PCA_CON)
& I2C_PCA_CON_SI) == 0)
&& (ret = time_before(jiffies, timeout)))
do {
ret = time_before(jiffies, timeout);
if (i2c->algo_data.read_byte(i2c, I2C_PCA_CON)
& I2C_PCA_CON_SI)
break;
udelay(100);
} while (ret);
}
return ret > 0;

54
drivers/i2c/i2c-core.c
View file

@ -32,7 +32,6 @@
#include <linux/init.h>
#include <linux/idr.h>
#include <linux/mutex.h>
#include <linux/of_i2c.h>
#include <linux/of_device.h>
#include <linux/completion.h>
#include <linux/hardirq.h>
@ -197,11 +196,12 @@ static int i2c_device_pm_suspend(struct device *dev)
{
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
if (pm_runtime_suspended(dev))
return 0;
if (pm)
return pm->suspend ? pm->suspend(dev) : 0;
if (pm) {
if (pm_runtime_suspended(dev))
return 0;
else
return pm->suspend ? pm->suspend(dev) : 0;
}
return i2c_legacy_suspend(dev, PMSG_SUSPEND);
}
@ -216,12 +216,6 @@ static int i2c_device_pm_resume(struct device *dev)
else
ret = i2c_legacy_resume(dev);
if (!ret) {
pm_runtime_disable(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
}
return ret;
}
@ -229,11 +223,12 @@ static int i2c_device_pm_freeze(struct device *dev)
{
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
if (pm_runtime_suspended(dev))
return 0;
if (pm)
return pm->freeze ? pm->freeze(dev) : 0;
if (pm) {
if (pm_runtime_suspended(dev))
return 0;
else
return pm->freeze ? pm->freeze(dev) : 0;
}
return i2c_legacy_suspend(dev, PMSG_FREEZE);
}
@ -242,11 +237,12 @@ static int i2c_device_pm_thaw(struct device *dev)
{
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
if (pm_runtime_suspended(dev))
return 0;
if (pm)
return pm->thaw ? pm->thaw(dev) : 0;
if (pm) {
if (pm_runtime_suspended(dev))
return 0;
else
return pm->thaw ? pm->thaw(dev) : 0;
}
return i2c_legacy_resume(dev);
}
@ -255,11 +251,12 @@ static int i2c_device_pm_poweroff(struct device *dev)
{
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
if (pm_runtime_suspended(dev))
return 0;
if (pm)
return pm->poweroff ? pm->poweroff(dev) : 0;
if (pm) {
if (pm_runtime_suspended(dev))
return 0;
else
return pm->poweroff ? pm->poweroff(dev) : 0;
}
return i2c_legacy_suspend(dev, PMSG_HIBERNATE);
}
@ -876,9 +873,6 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
if (adap->nr < __i2c_first_dynamic_bus_num)
i2c_scan_static_board_info(adap);
/* Register devices from the device tree */
of_i2c_register_devices(adap);
/* Notify drivers */
mutex_lock(&core_lock);
bus_for_each_drv(&i2c_bus_type, NULL, adap, __process_new_adapter);

10
drivers/idle/intel_idle.c
View file

@ -157,13 +157,13 @@ static struct cpuidle_state atom_cstates[MWAIT_MAX_NUM_CSTATES] = {
{ /* MWAIT C5 */ },
{ /* MWAIT C6 */
.name = "ATM-C6",
.desc = "MWAIT 0x40",
.driver_data = (void *) 0x40,
.desc = "MWAIT 0x52",
.driver_data = (void *) 0x52,
.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 200,
.exit_latency = 140,
.power_usage = 150,
.target_residency = 800,
.enter = NULL }, /* disabled */
.target_residency = 560,
.enter = &intel_idle },
};
/**

3
drivers/input/joydev.c
View file

@ -483,6 +483,9 @@ static int joydev_handle_JSIOCSAXMAP(struct joydev *joydev,
memcpy(joydev->abspam, abspam, len);
for (i = 0; i < joydev->nabs; i++)
joydev->absmap[joydev->abspam[i]] = i;
out:
kfree(abspam);
return retval;

7
drivers/input/misc/uinput.c
View file

@ -404,6 +404,13 @@ static int uinput_setup_device(struct uinput_device *udev, const char __user *bu
retval = uinput_validate_absbits(dev);
if (retval < 0)
goto exit;
if (test_bit(ABS_MT_SLOT, dev->absbit)) {
int nslot = input_abs_get_max(dev, ABS_MT_SLOT) + 1;
input_mt_create_slots(dev, nslot);
input_set_events_per_packet(dev, 6 * nslot);
} else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) {
input_set_events_per_packet(dev, 60);
}
}
udev->state = UIST_SETUP_COMPLETE;

23
drivers/input/tablet/wacom_sys.c
View file

@ -103,27 +103,26 @@ static void wacom_sys_irq(struct urb *urb)
static int wacom_open(struct input_dev *dev)
{
struct wacom *wacom = input_get_drvdata(dev);
int retval = 0;
if (usb_autopm_get_interface(wacom->intf) < 0)
return -EIO;
mutex_lock(&wacom->lock);
wacom->irq->dev = wacom->usbdev;
if (usb_autopm_get_interface(wacom->intf) < 0) {
mutex_unlock(&wacom->lock);
return -EIO;
}
if (usb_submit_urb(wacom->irq, GFP_KERNEL)) {
usb_autopm_put_interface(wacom->intf);
mutex_unlock(&wacom->lock);
return -EIO;
retval = -EIO;
goto out;
}
wacom->open = true;
wacom->intf->needs_remote_wakeup = 1;
out:
mutex_unlock(&wacom->lock);
return 0;
if (retval)
usb_autopm_put_interface(wacom->intf);
return retval;
}
static void wacom_close(struct input_dev *dev)
@ -135,6 +134,8 @@ static void wacom_close(struct input_dev *dev)
wacom->open = false;
wacom->intf->needs_remote_wakeup = 0;
mutex_unlock(&wacom->lock);
usb_autopm_put_interface(wacom->intf);
}
static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hid_desc,

4
drivers/input/tablet/wacom_wac.c
View file

@ -442,8 +442,10 @@ static void wacom_intuos_general(struct wacom_wac *wacom)
/* general pen packet */
if ((data[1] & 0xb8) == 0xa0) {
t = (data[6] << 2) | ((data[7] >> 6) & 3);
if (features->type >= INTUOS4S && features->type <= INTUOS4L)
if ((features->type >= INTUOS4S && features->type <= INTUOS4L) ||
features->type == WACOM_21UX2) {
t = (t << 1) | (data[1] & 1);
}
input_report_abs(input, ABS_PRESSURE, t);
input_report_abs(input, ABS_TILT_X,
((data[7] << 1) & 0x7e) | (data[8] >> 7));

18
drivers/isdn/sc/interrupt.c
View file

@ -112,11 +112,19 @@ irqreturn_t interrupt_handler(int dummy, void *card_inst)
}
else if(callid>=0x0000 && callid<=0x7FFF)
{
int len;
pr_debug("%s: Got Incoming Call\n",
sc_adapter[card]->devicename);
strcpy(setup.phone,&(rcvmsg.msg_data.byte_array[4]));
strcpy(setup.eazmsn,
sc_adapter[card]->channel[rcvmsg.phy_link_no-1].dn);
len = strlcpy(setup.phone, &(rcvmsg.msg_data.byte_array[4]),
sizeof(setup.phone));
if (len >= sizeof(setup.phone))
continue;
len = strlcpy(setup.eazmsn,
sc_adapter[card]->channel[rcvmsg.phy_link_no - 1].dn,
sizeof(setup.eazmsn));
if (len >= sizeof(setup.eazmsn))
continue;
setup.si1 = 7;
setup.si2 = 0;
setup.plan = 0;
@ -176,7 +184,9 @@ irqreturn_t interrupt_handler(int dummy, void *card_inst)
* Handle a GetMyNumber Rsp
*/
if (IS_CE_MESSAGE(rcvmsg,Call,0,GetMyNumber)){
strcpy(sc_adapter[card]->channel[rcvmsg.phy_link_no-1].dn,rcvmsg.msg_data.byte_array);
strlcpy(sc_adapter[card]->channel[rcvmsg.phy_link_no - 1].dn,
rcvmsg.msg_data.byte_array,
sizeof(rcvmsg.msg_data.byte_array));
continue;
}

9
drivers/md/bitmap.c
View file

@ -1000,10 +1000,11 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start)
page = bitmap->sb_page;
offset = sizeof(bitmap_super_t);
if (!file)
read_sb_page(bitmap->mddev,
bitmap->mddev->bitmap_info.offset,
page,
index, count);
page = read_sb_page(
bitmap->mddev,
bitmap->mddev->bitmap_info.offset,
page,
index, count);
} else if (file) {
page = read_page(file, index, bitmap, count);
offset = 0;

4
drivers/md/raid1.c
View file

@ -1839,7 +1839,9 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i
/* take from bio_init */
bio->bi_next = NULL;
bio->bi_flags &= ~(BIO_POOL_MASK-1);
bio->bi_flags |= 1 << BIO_UPTODATE;
bio->bi_comp_cpu = -1;
bio->bi_rw = READ;
bio->bi_vcnt = 0;
bio->bi_idx = 0;
@ -1912,7 +1914,7 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i
!test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery))
break;
BUG_ON(sync_blocks < (PAGE_SIZE>>9));
if (len > (sync_blocks<<9))
if ((len >> 9) > sync_blocks)
len = sync_blocks<<9;
}

9
drivers/media/IR/ir-keytable.c
View file

@ -319,7 +319,7 @@ static void ir_timer_keyup(unsigned long cookie)
* a keyup event might follow immediately after the keydown.
*/
spin_lock_irqsave(&ir->keylock, flags);
if (time_is_after_eq_jiffies(ir->keyup_jiffies))
if (time_is_before_eq_jiffies(ir->keyup_jiffies))
ir_keyup(ir);
spin_unlock_irqrestore(&ir->keylock, flags);
}
@ -510,6 +510,13 @@ int __ir_input_register(struct input_dev *input_dev,
(ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_IR_RAW) ?
" in raw mode" : "");
/*
* Default delay of 250ms is too short for some protocols, expecially
* since the timeout is currently set to 250ms. Increase it to 500ms,
* to avoid wrong repetition of the keycodes.
*/
input_dev->rep[REP_DELAY] = 500;
return 0;
out_event:

2
drivers/media/IR/ir-lirc-codec.c
View file

@ -267,7 +267,7 @@ static int ir_lirc_register(struct input_dev *input_dev)
features |= LIRC_CAN_SET_SEND_CARRIER;
if (ir_dev->props->s_tx_duty_cycle)
features |= LIRC_CAN_SET_REC_DUTY_CYCLE;
features |= LIRC_CAN_SET_SEND_DUTY_CYCLE;
}
if (ir_dev->props->s_rx_carrier_range)

4
drivers/media/IR/ir-raw-event.c
View file

@ -279,9 +279,11 @@ int ir_raw_event_register(struct input_dev *input_dev)
"rc%u", (unsigned int)ir->devno);
if (IS_ERR(ir->raw->thread)) {
int ret = PTR_ERR(ir->raw->thread);
kfree(ir->raw);
ir->raw = NULL;
return PTR_ERR(ir->raw->thread);
return ret;
}
mutex_lock(&ir_raw_handler_lock);

17
drivers/media/IR/ir-sysfs.c
View file

@ -67,13 +67,14 @@ static ssize_t show_protocols(struct device *d,
char *tmp = buf;
int i;
if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
enabled = ir_dev->rc_tab.ir_type;
allowed = ir_dev->props->allowed_protos;
} else {
} else if (ir_dev->raw) {
enabled = ir_dev->raw->enabled_protocols;
allowed = ir_raw_get_allowed_protocols();
}
} else
return sprintf(tmp, "[builtin]\n");
IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n",
(long long)allowed,
@ -121,10 +122,14 @@ static ssize_t store_protocols(struct device *d,
int rc, i, count = 0;
unsigned long flags;
if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
type = ir_dev->rc_tab.ir_type;
else
else if (ir_dev->raw)
type = ir_dev->raw->enabled_protocols;
else {
IR_dprintk(1, "Protocol switching not supported\n");
return -EINVAL;
}
while ((tmp = strsep((char **) &data, " \n")) != NULL) {
if (!*tmp)
@ -185,7 +190,7 @@ static ssize_t store_protocols(struct device *d,
}
}
if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
spin_lock_irqsave(&ir_dev->rc_tab.lock, flags);
ir_dev->rc_tab.ir_type = type;
spin_unlock_irqrestore(&ir_dev->rc_tab.lock, flags);

3
drivers/media/IR/keymaps/rc-rc6-mce.c
View file

@ -19,6 +19,7 @@ static struct ir_scancode rc6_mce[] = {
{ 0x800f0416, KEY_PLAY },
{ 0x800f0418, KEY_PAUSE },
{ 0x800f046e, KEY_PLAYPAUSE },
{ 0x800f0419, KEY_STOP },
{ 0x800f0417, KEY_RECORD },
@ -37,6 +38,8 @@ static struct ir_scancode rc6_mce[] = {
{ 0x800f0411, KEY_VOLUMEDOWN },
{ 0x800f0412, KEY_CHANNELUP },
{ 0x800f0413, KEY_CHANNELDOWN },
{ 0x800f043a, KEY_BRIGHTNESSUP },
{ 0x800f0480, KEY_BRIGHTNESSDOWN },
{ 0x800f0401, KEY_NUMERIC_1 },
{ 0x800f0402, KEY_NUMERIC_2 },

4
drivers/media/IR/mceusb.c
View file

@ -120,6 +120,10 @@ static struct usb_device_id mceusb_dev_table[] = {
{ USB_DEVICE(VENDOR_PHILIPS, 0x0613) },
/* Philips eHome Infrared Transceiver */
{ USB_DEVICE(VENDOR_PHILIPS, 0x0815) },
/* Philips/Spinel plus IR transceiver for ASUS */
{ USB_DEVICE(VENDOR_PHILIPS, 0x206c) },
/* Philips/Spinel plus IR transceiver for ASUS */
{ USB_DEVICE(VENDOR_PHILIPS, 0x2088) },
/* Realtek MCE IR Receiver */
{ USB_DEVICE(VENDOR_REALTEK, 0x0161) },
/* SMK/Toshiba G83C0004D410 */

3
drivers/media/dvb/dvb-usb/dib0700_core.c
View file

@ -673,9 +673,6 @@ static int dib0700_probe(struct usb_interface *intf,
else
dev->props.rc.core.bulk_mode = false;
/* Need a higher delay, to avoid wrong repeat */
dev->rc_input_dev->rep[REP_DELAY] = 500;
dib0700_rc_setup(dev);
return 0;

56
drivers/media/dvb/dvb-usb/dib0700_devices.c
View file

@ -940,6 +940,58 @@ static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap)
return adap->fe == NULL ? -ENODEV : 0;
}
/* STK7770P */
static struct dib7000p_config dib7770p_dib7000p_config = {
.output_mpeg2_in_188_bytes = 1,
.agc_config_count = 1,
.agc = &dib7070_agc_config,
.bw = &dib7070_bw_config_12_mhz,
.tuner_is_baseband = 1,
.spur_protect = 1,
.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
.hostbus_diversity = 1,
.enable_current_mirror = 1,
.disable_sample_and_hold = 0,
};
static int stk7770p_frontend_attach(struct dvb_usb_adapter *adap)
{
struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
else
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
dib0700_ctrl_clock(adap->dev, 72, 1);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
&dib7770p_dib7000p_config) != 0) {
err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n",
__func__);
return -ENODEV;
}
adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
&dib7770p_dib7000p_config);
return adap->fe == NULL ? -ENODEV : 0;
}
/* DIB807x generic */
static struct dibx000_agc_config dib807x_agc_config[2] = {
{
@ -1781,7 +1833,7 @@ struct usb_device_id dib0700_usb_id_table[] = {
/* 60 */{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS_2) },
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XPVR) },
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XP) },
{ USB_DEVICE(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD) },
{ USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x000, 0x3f00) },
{ USB_DEVICE(USB_VID_EVOLUTEPC, USB_PID_TVWAY_PLUS) },
/* 65 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73ESE) },
{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV282E) },
@ -2406,7 +2458,7 @@ struct dvb_usb_device_properties dib0700_devices[] = {
.pid_filter_count = 32,
.pid_filter = stk70x0p_pid_filter,
.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
.frontend_attach = stk7070p_frontend_attach,
.frontend_attach = stk7770p_frontend_attach,
.tuner_attach = dib7770p_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),

4
drivers/media/dvb/dvb-usb/opera1.c
View file

@ -483,9 +483,7 @@ static int opera1_xilinx_load_firmware(struct usb_device *dev,
}
}
kfree(p);
if (fw) {
release_firmware(fw);
}
release_firmware(fw);
return ret;
}

8
drivers/media/dvb/frontends/dib7000p.c
View file

@ -260,6 +260,9 @@ static void dib7000p_set_adc_state(struct dib7000p_state *state, enum dibx000_ad
// dprintk( "908: %x, 909: %x\n", reg_908, reg_909);
reg_909 |= (state->cfg.disable_sample_and_hold & 1) << 4;
reg_908 |= (state->cfg.enable_current_mirror & 1) << 7;
dib7000p_write_word(state, 908, reg_908);
dib7000p_write_word(state, 909, reg_909);
}
@ -778,7 +781,10 @@ static void dib7000p_set_channel(struct dib7000p_state *state, struct dvb_fronte
default:
case GUARD_INTERVAL_1_32: value *= 1; break;
}
state->div_sync_wait = (value * 3) / 2 + 32; // add 50% SFN margin + compensate for one DVSY-fifo TODO
if (state->cfg.diversity_delay == 0)
state->div_sync_wait = (value * 3) / 2 + 48; // add 50% SFN margin + compensate for one DVSY-fifo
else
state->div_sync_wait = (value * 3) / 2 + state->cfg.diversity_delay; // add 50% SFN margin + compensate for one DVSY-fifo
/* deactive the possibility of diversity reception if extended interleaver */
state->div_force_off = !1 && ch->u.ofdm.transmission_mode != TRANSMISSION_MODE_8K;

5
drivers/media/dvb/frontends/dib7000p.h
View file

@ -33,6 +33,11 @@ struct dib7000p_config {
int (*agc_control) (struct dvb_frontend *, u8 before);
u8 output_mode;
u8 disable_sample_and_hold : 1;
u8 enable_current_mirror : 1;
u8 diversity_delay;
};
#define DEFAULT_DIB7000P_I2C_ADDRESS 18

33
drivers/media/dvb/siano/smscoreapi.c
View file

@ -1098,33 +1098,26 @@ EXPORT_SYMBOL_GPL(smscore_onresponse);
*
* @return pointer to descriptor on success, NULL on error.
*/
struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev)
struct smscore_buffer_t *get_entry(struct smscore_device_t *coredev)
{
struct smscore_buffer_t *cb = NULL;
unsigned long flags;
DEFINE_WAIT(wait);
spin_lock_irqsave(&coredev->bufferslock, flags);
/* This function must return a valid buffer, since the buffer list is
* finite, we check that there is an available buffer, if not, we wait
* until such buffer become available.
*/
prepare_to_wait(&coredev->buffer_mng_waitq, &wait, TASK_INTERRUPTIBLE);
if (list_empty(&coredev->buffers)) {
spin_unlock_irqrestore(&coredev->bufferslock, flags);
schedule();
spin_lock_irqsave(&coredev->bufferslock, flags);
if (!list_empty(&coredev->buffers)) {
cb = (struct smscore_buffer_t *) coredev->buffers.next;
list_del(&cb->entry);
}
finish_wait(&coredev->buffer_mng_waitq, &wait);
cb = (struct smscore_buffer_t *) coredev->buffers.next;
list_del(&cb->entry);
spin_unlock_irqrestore(&coredev->bufferslock, flags);
return cb;
}
struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev)
{
struct smscore_buffer_t *cb = NULL;
wait_event(coredev->buffer_mng_waitq, (cb = get_entry(coredev)));
return cb;
}

2
drivers/media/radio/si470x/radio-si470x-i2c.c
View file

@ -395,7 +395,7 @@ static int __devinit si470x_i2c_probe(struct i2c_client *client,
radio->registers[POWERCFG] = POWERCFG_ENABLE;
if (si470x_set_register(radio, POWERCFG) < 0) {
retval = -EIO;
goto err_all;
goto err_video;
}
msleep(110);

1
drivers/media/video/cx231xx/Makefile
View file

@ -11,4 +11,5 @@ EXTRA_CFLAGS += -Idrivers/media/video
EXTRA_CFLAGS += -Idrivers/media/common/tuners
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-usb

17
drivers/media/video/cx231xx/cx231xx-cards.c
View file

@ -32,6 +32,7 @@
#include <media/v4l2-chip-ident.h>
#include <media/cx25840.h>
#include "dvb-usb-ids.h"
#include "xc5000.h"
#include "cx231xx.h"
@ -175,6 +176,8 @@ struct usb_device_id cx231xx_id_table[] = {
.driver_info = CX231XX_BOARD_CNXT_RDE_250},
{USB_DEVICE(0x0572, 0x58A1),
.driver_info = CX231XX_BOARD_CNXT_RDU_250},
{USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x4000,0x4fff),
.driver_info = CX231XX_BOARD_UNKNOWN},
{},
};
@ -226,14 +229,16 @@ void cx231xx_pre_card_setup(struct cx231xx *dev)
dev->board.name, dev->model);
/* set the direction for GPIO pins */
cx231xx_set_gpio_direction(dev, dev->board.tuner_gpio->bit, 1);
cx231xx_set_gpio_value(dev, dev->board.tuner_gpio->bit, 1);
cx231xx_set_gpio_direction(dev, dev->board.tuner_sif_gpio, 1);
if (dev->board.tuner_gpio) {
cx231xx_set_gpio_direction(dev, dev->board.tuner_gpio->bit, 1);
cx231xx_set_gpio_value(dev, dev->board.tuner_gpio->bit, 1);
cx231xx_set_gpio_direction(dev, dev->board.tuner_sif_gpio, 1);
/* request some modules if any required */
/* request some modules if any required */
/* reset the Tuner */
cx231xx_gpio_set(dev, dev->board.tuner_gpio);
/* reset the Tuner */
cx231xx_gpio_set(dev, dev->board.tuner_gpio);
}
/* set the mode to Analog mode initially */
cx231xx_set_mode(dev, CX231XX_ANALOG_MODE);

2
drivers/media/video/cx25840/cx25840-core.c
View file

@ -1996,7 +1996,7 @@ static int cx25840_probe(struct i2c_client *client,
state->volume = v4l2_ctrl_new_std(&state->hdl,
&cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_VOLUME,
0, 65335, 65535 / 100, default_volume);
0, 65535, 65535 / 100, default_volume);
state->mute = v4l2_ctrl_new_std(&state->hdl,
&cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_MUTE,
0, 1, 1, 0);

2
drivers/media/video/cx88/Kconfig
View file

@ -17,7 +17,7 @@ config VIDEO_CX88
config VIDEO_CX88_ALSA
tristate "Conexant 2388x DMA audio support"
depends on VIDEO_CX88 && SND && EXPERIMENTAL
depends on VIDEO_CX88 && SND
select SND_PCM
---help---
This is a video4linux driver for direct (DMA) audio on

Some files were not shown because too many files have changed in this diff Show more