diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt index cc553f0952c5..eb7ee91556a5 100644 --- a/Documentation/devicetree/bindings/thermal/thermal.txt +++ b/Documentation/devicetree/bindings/thermal/thermal.txt @@ -97,8 +97,8 @@ get assigned to trip points of the zone. The cooling devices are expected to be loaded in the target system. Required properties: -- cooling-device: A phandle of a cooling device with its specifier, - Type: phandle + referring to which cooling device is used in this +- cooling-device: A list of phandles of cooling devices with their specifiers, + Type: phandle + referring to which cooling devices are used in this cooling specifier binding. In the cooling specifier, the first cell is the minimum cooling state and the second cell is the maximum cooling state used in this map. @@ -276,12 +276,7 @@ thermal-zones { }; map1 { trip = <&cpu_alert1>; - cooling-device = <&fan0 5 THERMAL_NO_LIMIT>; - }; - map2 { - trip = <&cpu_alert1>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&fan0 5 THERMAL_NO_LIMIT>, <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; diff --git a/MAINTAINERS b/MAINTAINERS index eb27d7ebfa68..b2fcd1c6bdcb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14410,6 +14410,7 @@ F: drivers/media/radio/radio-raremono.c THERMAL M: Zhang Rui M: Eduardo Valentin +R: Daniel Lezcano L: linux-pm@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 82979880f985..0e69edc77d18 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -360,7 +360,7 @@ config INTEL_SOC_DTS_IOSF_CORE config INTEL_SOC_DTS_THERMAL tristate "Intel SoCs DTS thermal driver" - depends on X86 && PCI + depends on X86 && PCI && ACPI select INTEL_SOC_DTS_IOSF_CORE select THERMAL_WRITABLE_TRIPS help diff --git a/drivers/thermal/intel_soc_dts_thermal.c b/drivers/thermal/intel_soc_dts_thermal.c index c27868b2c6af..1e47511a6bd5 100644 --- a/drivers/thermal/intel_soc_dts_thermal.c +++ b/drivers/thermal/intel_soc_dts_thermal.c @@ -15,6 +15,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include #include #include #include @@ -31,6 +32,7 @@ MODULE_PARM_DESC(crit_offset, /* IRQ 86 is a fixed APIC interrupt for BYT DTS Aux threshold notifications */ #define BYT_SOC_DTS_APIC_IRQ 86 +static int soc_dts_thres_gsi; static int soc_dts_thres_irq; static struct intel_soc_dts_sensors *soc_dts; @@ -65,7 +67,21 @@ static int __init intel_soc_thermal_init(void) return err; } - soc_dts_thres_irq = (int)match_cpu->driver_data; + soc_dts_thres_gsi = (int)match_cpu->driver_data; + if (soc_dts_thres_gsi) { + /* + * Note the flags here MUST match the firmware defaults, rather + * then the request_irq flags, otherwise we get an EBUSY error. + */ + soc_dts_thres_irq = acpi_register_gsi(NULL, soc_dts_thres_gsi, + ACPI_LEVEL_SENSITIVE, + ACPI_ACTIVE_LOW); + if (soc_dts_thres_irq < 0) { + pr_warn("intel_soc_dts: Could not get IRQ for GSI %d, err %d\n", + soc_dts_thres_gsi, soc_dts_thres_irq); + soc_dts_thres_irq = 0; + } + } if (soc_dts_thres_irq) { err = request_threaded_irq(soc_dts_thres_irq, NULL, @@ -90,8 +106,10 @@ static int __init intel_soc_thermal_init(void) return 0; error_trips: - if (soc_dts_thres_irq) + if (soc_dts_thres_irq) { free_irq(soc_dts_thres_irq, soc_dts); + acpi_unregister_gsi(soc_dts_thres_gsi); + } intel_soc_dts_iosf_exit(soc_dts); return err; @@ -99,8 +117,10 @@ static int __init intel_soc_thermal_init(void) static void __exit intel_soc_thermal_exit(void) { - if (soc_dts_thres_irq) + if (soc_dts_thres_irq) { free_irq(soc_dts_thres_irq, soc_dts); + acpi_unregister_gsi(soc_dts_thres_gsi); + } intel_soc_dts_iosf_exit(soc_dts); }