sparc,leon: support for GRPCI1 PCI host bridge controller
Some of the GRPCI1 cores does not support detection of all PCI errors, the default is therefore limited PCI error handling. The property all_pci_errors my be set by the boot loader to enable interrupt on all PCI errors. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Daniel Hellstrom
David S. Miller
parent
aa90b69435
commit
d8650106b4
3 changed files with 736 additions and 0 deletions
|
|
@ -494,6 +494,17 @@ config LEON_PCI
|
|||
depends on PCI && SPARC_LEON
|
||||
default y
|
||||
|
||||
config SPARC_GRPCI1
|
||||
bool "GRPCI Host Bridge Support"
|
||||
depends on LEON_PCI
|
||||
default y
|
||||
help
|
||||
Say Y here to include the GRPCI Host Bridge Driver. The GRPCI
|
||||
PCI host controller is typically found in GRLIB SPARC32/LEON
|
||||
systems. The driver has one property (all_pci_errors) controlled
|
||||
from the bootloader that makes the GRPCI to generate interrupts
|
||||
on detected PCI Parity and System errors.
|
||||
|
||||
config GRPCI2
|
||||
bool "GRPCI2 Host Bridge Support"
|
||||
depends on LEON_PCI
|
||||
|
|
|
|||
|
|
@ -75,6 +75,7 @@ obj-y += dma.o
|
|||
obj-$(CONFIG_PCIC_PCI) += pcic.o
|
||||
obj-$(CONFIG_LEON_PCI) += leon_pci.o
|
||||
obj-$(CONFIG_GRPCI2) += leon_pci_grpci2.o
|
||||
obj-$(CONFIG_SPARC_GRPCI1)+= leon_pci_grpci1.o
|
||||
|
||||
obj-$(CONFIG_SMP) += trampoline_$(BITS).o smp_$(BITS).o
|
||||
obj-$(CONFIG_SPARC32_SMP) += sun4m_smp.o sun4d_smp.o leon_smp.o
|
||||
|
|
|
|||
724
arch/sparc/kernel/leon_pci_grpci1.c
Normal file
724
arch/sparc/kernel/leon_pci_grpci1.c
Normal file
|
|
@ -0,0 +1,724 @@
|
|||
/*
|
||||
* leon_pci_grpci1.c: GRPCI1 Host PCI driver
|
||||
*
|
||||
* Copyright (C) 2013 Aeroflex Gaisler AB
|
||||
*
|
||||
* This GRPCI1 driver does not support PCI interrupts taken from
|
||||
* GPIO pins. Interrupt generation at PCI parity and system error
|
||||
* detection is by default turned off since some GRPCI1 cores does
|
||||
* not support detection. It can be turned on from the bootloader
|
||||
* using the all_pci_errors property.
|
||||
*
|
||||
* Contributors: Daniel Hellstrom <daniel@gaisler.com>
|
||||
*/
|
||||
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/export.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/of_irq.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/pci.h>
|
||||
|
||||
#include <asm/leon_pci.h>
|
||||
#include <asm/sections.h>
|
||||
#include <asm/vaddrs.h>
|
||||
#include <asm/leon.h>
|
||||
#include <asm/io.h>
|
||||
|
||||
#include "irq.h"
|
||||
|
||||
/* Enable/Disable Debugging Configuration Space Access */
|
||||
#undef GRPCI1_DEBUG_CFGACCESS
|
||||
|
||||
/*
|
||||
* GRPCI1 APB Register MAP
|
||||
*/
|
||||
struct grpci1_regs {
|
||||
unsigned int cfg_stat; /* 0x00 Configuration / Status */
|
||||
unsigned int bar0; /* 0x04 BAR0 (RO) */
|
||||
unsigned int page0; /* 0x08 PAGE0 (RO) */
|
||||
unsigned int bar1; /* 0x0C BAR1 (RO) */
|
||||
unsigned int page1; /* 0x10 PAGE1 */
|
||||
unsigned int iomap; /* 0x14 IO Map */
|
||||
unsigned int stat_cmd; /* 0x18 PCI Status & Command (RO) */
|
||||
unsigned int irq; /* 0x1C Interrupt register */
|
||||
};
|
||||
|
||||
#define REGLOAD(a) (be32_to_cpu(__raw_readl(&(a))))
|
||||
#define REGSTORE(a, v) (__raw_writel(cpu_to_be32(v), &(a)))
|
||||
|
||||
#define PAGE0_BTEN_BIT 0
|
||||
#define PAGE0_BTEN (1 << PAGE0_BTEN_BIT)
|
||||
|
||||
#define CFGSTAT_HOST_BIT 13
|
||||
#define CFGSTAT_CTO_BIT 8
|
||||
#define CFGSTAT_HOST (1 << CFGSTAT_HOST_BIT)
|
||||
#define CFGSTAT_CTO (1 << CFGSTAT_CTO_BIT)
|
||||
|
||||
#define IRQ_DPE (1 << 9)
|
||||
#define IRQ_SSE (1 << 8)
|
||||
#define IRQ_RMA (1 << 7)
|
||||
#define IRQ_RTA (1 << 6)
|
||||
#define IRQ_STA (1 << 5)
|
||||
#define IRQ_DPED (1 << 4)
|
||||
#define IRQ_INTD (1 << 3)
|
||||
#define IRQ_INTC (1 << 2)
|
||||
#define IRQ_INTB (1 << 1)
|
||||
#define IRQ_INTA (1 << 0)
|
||||
#define IRQ_DEF_ERRORS (IRQ_RMA | IRQ_RTA | IRQ_STA)
|
||||
#define IRQ_ALL_ERRORS (IRQ_DPED | IRQ_DEF_ERRORS | IRQ_SSE | IRQ_DPE)
|
||||
#define IRQ_INTX (IRQ_INTA | IRQ_INTB | IRQ_INTC | IRQ_INTD)
|
||||
#define IRQ_MASK_BIT 16
|
||||
|
||||
#define DEF_PCI_ERRORS (PCI_STATUS_SIG_TARGET_ABORT | \
|
||||
PCI_STATUS_REC_TARGET_ABORT | \
|
||||
PCI_STATUS_REC_MASTER_ABORT)
|
||||
#define ALL_PCI_ERRORS (PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY | \
|
||||
PCI_STATUS_SIG_SYSTEM_ERROR | DEF_PCI_ERRORS)
|
||||
|
||||
#define TGT 256
|
||||
|
||||
struct grpci1_priv {
|
||||
struct leon_pci_info info; /* must be on top of this structure */
|
||||
struct grpci1_regs *regs; /* GRPCI register map */
|
||||
struct device *dev;
|
||||
int pci_err_mask; /* STATUS register error mask */
|
||||
int irq; /* LEON irqctrl GRPCI IRQ */
|
||||
unsigned char irq_map[4]; /* GRPCI nexus PCI INTX# IRQs */
|
||||
unsigned int irq_err; /* GRPCI nexus Virt Error IRQ */
|
||||
|
||||
/* AHB PCI Windows */
|
||||
unsigned long pci_area; /* MEMORY */
|
||||
unsigned long pci_area_end;
|
||||
unsigned long pci_io; /* I/O */
|
||||
unsigned long pci_conf; /* CONFIGURATION */
|
||||
unsigned long pci_conf_end;
|
||||
unsigned long pci_io_va;
|
||||
};
|
||||
|
||||
static struct grpci1_priv *grpci1priv;
|
||||
|
||||
static int grpci1_cfg_w32(struct grpci1_priv *priv, unsigned int bus,
|
||||
unsigned int devfn, int where, u32 val);
|
||||
|
||||
int grpci1_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
|
||||
{
|
||||
struct grpci1_priv *priv = dev->bus->sysdata;
|
||||
int irq_group;
|
||||
|
||||
/* Use default IRQ decoding on PCI BUS0 according slot numbering */
|
||||
irq_group = slot & 0x3;
|
||||
pin = ((pin - 1) + irq_group) & 0x3;
|
||||
|
||||
return priv->irq_map[pin];
|
||||
}
|
||||
|
||||
static int grpci1_cfg_r32(struct grpci1_priv *priv, unsigned int bus,
|
||||
unsigned int devfn, int where, u32 *val)
|
||||
{
|
||||
u32 *pci_conf, tmp, cfg;
|
||||
|
||||
if (where & 0x3)
|
||||
return -EINVAL;
|
||||
|
||||
if (bus == 0) {
|
||||
devfn += (0x8 * 6); /* start at AD16=Device0 */
|
||||
} else if (bus == TGT) {
|
||||
bus = 0;
|
||||
devfn = 0; /* special case: bridge controller itself */
|
||||
}
|
||||
|
||||
/* Select bus */
|
||||
cfg = REGLOAD(priv->regs->cfg_stat);
|
||||
REGSTORE(priv->regs->cfg_stat, (cfg & ~(0xf << 23)) | (bus << 23));
|
||||
|
||||
/* do read access */
|
||||
pci_conf = (u32 *) (priv->pci_conf | (devfn << 8) | (where & 0xfc));
|
||||
tmp = LEON3_BYPASS_LOAD_PA(pci_conf);
|
||||
|
||||
/* check if master abort was received */
|
||||
if (REGLOAD(priv->regs->cfg_stat) & CFGSTAT_CTO) {
|
||||
*val = 0xffffffff;
|
||||
/* Clear Master abort bit in PCI cfg space (is set) */
|
||||
tmp = REGLOAD(priv->regs->stat_cmd);
|
||||
grpci1_cfg_w32(priv, TGT, 0, PCI_COMMAND, tmp);
|
||||
} else {
|
||||
/* Bus always little endian (unaffected by byte-swapping) */
|
||||
*val = flip_dword(tmp);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int grpci1_cfg_r16(struct grpci1_priv *priv, unsigned int bus,
|
||||
unsigned int devfn, int where, u32 *val)
|
||||
{
|
||||
u32 v;
|
||||
int ret;
|
||||
|
||||
if (where & 0x1)
|
||||
return -EINVAL;
|
||||
ret = grpci1_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
|
||||
*val = 0xffff & (v >> (8 * (where & 0x3)));
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int grpci1_cfg_r8(struct grpci1_priv *priv, unsigned int bus,
|
||||
unsigned int devfn, int where, u32 *val)
|
||||
{
|
||||
u32 v;
|
||||
int ret;
|
||||
|
||||
ret = grpci1_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
|
||||
*val = 0xff & (v >> (8 * (where & 3)));
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int grpci1_cfg_w32(struct grpci1_priv *priv, unsigned int bus,
|
||||
unsigned int devfn, int where, u32 val)
|
||||
{
|
||||
unsigned int *pci_conf;
|
||||
u32 cfg;
|
||||
|
||||
if (where & 0x3)
|
||||
return -EINVAL;
|
||||
|
||||
if (bus == 0) {
|
||||
devfn += (0x8 * 6); /* start at AD16=Device0 */
|
||||
} else if (bus == TGT) {
|
||||
bus = 0;
|
||||
devfn = 0; /* special case: bridge controller itself */
|
||||
}
|
||||
|
||||
/* Select bus */
|
||||
cfg = REGLOAD(priv->regs->cfg_stat);
|
||||
REGSTORE(priv->regs->cfg_stat, (cfg & ~(0xf << 23)) | (bus << 23));
|
||||
|
||||
pci_conf = (unsigned int *) (priv->pci_conf |
|
||||
(devfn << 8) | (where & 0xfc));
|
||||
LEON3_BYPASS_STORE_PA(pci_conf, flip_dword(val));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int grpci1_cfg_w16(struct grpci1_priv *priv, unsigned int bus,
|
||||
unsigned int devfn, int where, u32 val)
|
||||
{
|
||||
int ret;
|
||||
u32 v;
|
||||
|
||||
if (where & 0x1)
|
||||
return -EINVAL;
|
||||
ret = grpci1_cfg_r32(priv, bus, devfn, where&~3, &v);
|
||||
if (ret)
|
||||
return ret;
|
||||
v = (v & ~(0xffff << (8 * (where & 0x3)))) |
|
||||
((0xffff & val) << (8 * (where & 0x3)));
|
||||
return grpci1_cfg_w32(priv, bus, devfn, where & ~0x3, v);
|
||||
}
|
||||
|
||||
static int grpci1_cfg_w8(struct grpci1_priv *priv, unsigned int bus,
|
||||
unsigned int devfn, int where, u32 val)
|
||||
{
|
||||
int ret;
|
||||
u32 v;
|
||||
|
||||
ret = grpci1_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
|
||||
if (ret != 0)
|
||||
return ret;
|
||||
v = (v & ~(0xff << (8 * (where & 0x3)))) |
|
||||
((0xff & val) << (8 * (where & 0x3)));
|
||||
return grpci1_cfg_w32(priv, bus, devfn, where & ~0x3, v);
|
||||
}
|
||||
|
||||
/* Read from Configuration Space. When entering here the PCI layer has taken
|
||||
* the pci_lock spinlock and IRQ is off.
|
||||
*/
|
||||
static int grpci1_read_config(struct pci_bus *bus, unsigned int devfn,
|
||||
int where, int size, u32 *val)
|
||||
{
|
||||
struct grpci1_priv *priv = grpci1priv;
|
||||
unsigned int busno = bus->number;
|
||||
int ret;
|
||||
|
||||
if (PCI_SLOT(devfn) > 15 || busno > 15) {
|
||||
*val = ~0;
|
||||
return 0;
|
||||
}
|
||||
|
||||
switch (size) {
|
||||
case 1:
|
||||
ret = grpci1_cfg_r8(priv, busno, devfn, where, val);
|
||||
break;
|
||||
case 2:
|
||||
ret = grpci1_cfg_r16(priv, busno, devfn, where, val);
|
||||
break;
|
||||
case 4:
|
||||
ret = grpci1_cfg_r32(priv, busno, devfn, where, val);
|
||||
break;
|
||||
default:
|
||||
ret = -EINVAL;
|
||||
break;
|
||||
}
|
||||
|
||||
#ifdef GRPCI1_DEBUG_CFGACCESS
|
||||
printk(KERN_INFO
|
||||
"grpci1_read_config: [%02x:%02x:%x] ofs=%d val=%x size=%d\n",
|
||||
busno, PCI_SLOT(devfn), PCI_FUNC(devfn), where, *val, size);
|
||||
#endif
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* Write to Configuration Space. When entering here the PCI layer has taken
|
||||
* the pci_lock spinlock and IRQ is off.
|
||||
*/
|
||||
static int grpci1_write_config(struct pci_bus *bus, unsigned int devfn,
|
||||
int where, int size, u32 val)
|
||||
{
|
||||
struct grpci1_priv *priv = grpci1priv;
|
||||
unsigned int busno = bus->number;
|
||||
|
||||
if (PCI_SLOT(devfn) > 15 || busno > 15)
|
||||
return 0;
|
||||
|
||||
#ifdef GRPCI1_DEBUG_CFGACCESS
|
||||
printk(KERN_INFO
|
||||
"grpci1_write_config: [%02x:%02x:%x] ofs=%d size=%d val=%x\n",
|
||||
busno, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, val);
|
||||
#endif
|
||||
|
||||
switch (size) {
|
||||
default:
|
||||
return -EINVAL;
|
||||
case 1:
|
||||
return grpci1_cfg_w8(priv, busno, devfn, where, val);
|
||||
case 2:
|
||||
return grpci1_cfg_w16(priv, busno, devfn, where, val);
|
||||
case 4:
|
||||
return grpci1_cfg_w32(priv, busno, devfn, where, val);
|
||||
}
|
||||
}
|
||||
|
||||
static struct pci_ops grpci1_ops = {
|
||||
.read = grpci1_read_config,
|
||||
.write = grpci1_write_config,
|
||||
};
|
||||
|
||||
/* GENIRQ IRQ chip implementation for grpci1 irqmode=0..2. In configuration
|
||||
* 3 where all PCI Interrupts has a separate IRQ on the system IRQ controller
|
||||
* this is not needed and the standard IRQ controller can be used.
|
||||
*/
|
||||
|
||||
static void grpci1_mask_irq(struct irq_data *data)
|
||||
{
|
||||
u32 irqidx;
|
||||
struct grpci1_priv *priv = grpci1priv;
|
||||
|
||||
irqidx = (u32)data->chip_data - 1;
|
||||
if (irqidx > 3) /* only mask PCI interrupts here */
|
||||
return;
|
||||
irqidx += IRQ_MASK_BIT;
|
||||
|
||||
REGSTORE(priv->regs->irq, REGLOAD(priv->regs->irq) & ~(1 << irqidx));
|
||||
}
|
||||
|
||||
static void grpci1_unmask_irq(struct irq_data *data)
|
||||
{
|
||||
u32 irqidx;
|
||||
struct grpci1_priv *priv = grpci1priv;
|
||||
|
||||
irqidx = (u32)data->chip_data - 1;
|
||||
if (irqidx > 3) /* only unmask PCI interrupts here */
|
||||
return;
|
||||
irqidx += IRQ_MASK_BIT;
|
||||
|
||||
REGSTORE(priv->regs->irq, REGLOAD(priv->regs->irq) | (1 << irqidx));
|
||||
}
|
||||
|
||||
static unsigned int grpci1_startup_irq(struct irq_data *data)
|
||||
{
|
||||
grpci1_unmask_irq(data);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void grpci1_shutdown_irq(struct irq_data *data)
|
||||
{
|
||||
grpci1_mask_irq(data);
|
||||
}
|
||||
|
||||
static struct irq_chip grpci1_irq = {
|
||||
.name = "grpci1",
|
||||
.irq_startup = grpci1_startup_irq,
|
||||
.irq_shutdown = grpci1_shutdown_irq,
|
||||
.irq_mask = grpci1_mask_irq,
|
||||
.irq_unmask = grpci1_unmask_irq,
|
||||
};
|
||||
|
||||
/* Handle one or multiple IRQs from the PCI core */
|
||||
static void grpci1_pci_flow_irq(unsigned int irq, struct irq_desc *desc)
|
||||
{
|
||||
struct grpci1_priv *priv = grpci1priv;
|
||||
int i, ack = 0;
|
||||
unsigned int irqreg;
|
||||
|
||||
irqreg = REGLOAD(priv->regs->irq);
|
||||
irqreg = (irqreg >> IRQ_MASK_BIT) & irqreg;
|
||||
|
||||
/* Error Interrupt? */
|
||||
if (irqreg & IRQ_ALL_ERRORS) {
|
||||
generic_handle_irq(priv->irq_err);
|
||||
ack = 1;
|
||||
}
|
||||
|
||||
/* PCI Interrupt? */
|
||||
if (irqreg & IRQ_INTX) {
|
||||
/* Call respective PCI Interrupt handler */
|
||||
for (i = 0; i < 4; i++) {
|
||||
if (irqreg & (1 << i))
|
||||
generic_handle_irq(priv->irq_map[i]);
|
||||
}
|
||||
ack = 1;
|
||||
}
|
||||
|
||||
/*
|
||||
* Call "first level" IRQ chip end-of-irq handler. It will ACK LEON IRQ
|
||||
* Controller, this must be done after IRQ sources have been handled to
|
||||
* avoid double IRQ generation
|
||||
*/
|
||||
if (ack)
|
||||
desc->irq_data.chip->irq_eoi(&desc->irq_data);
|
||||
}
|
||||
|
||||
/* Create a virtual IRQ */
|
||||
static unsigned int grpci1_build_device_irq(unsigned int irq)
|
||||
{
|
||||
unsigned int virq = 0, pil;
|
||||
|
||||
pil = 1 << 8;
|
||||
virq = irq_alloc(irq, pil);
|
||||
if (virq == 0)
|
||||
goto out;
|
||||
|
||||
irq_set_chip_and_handler_name(virq, &grpci1_irq, handle_simple_irq,
|
||||
"pcilvl");
|
||||
irq_set_chip_data(virq, (void *)irq);
|
||||
|
||||
out:
|
||||
return virq;
|
||||
}
|
||||
|
||||
/*
|
||||
* Initialize mappings AMBA<->PCI, clear IRQ state, setup PCI interface
|
||||
*
|
||||
* Target BARs:
|
||||
* BAR0: unused in this implementation
|
||||
* BAR1: peripheral DMA to host's memory (size at least 256MByte)
|
||||
* BAR2..BAR5: not implemented in hardware
|
||||
*/
|
||||
void grpci1_hw_init(struct grpci1_priv *priv)
|
||||
{
|
||||
u32 ahbadr, bar_sz, data, pciadr;
|
||||
struct grpci1_regs *regs = priv->regs;
|
||||
|
||||
/* set 1:1 mapping between AHB -> PCI memory space */
|
||||
REGSTORE(regs->cfg_stat, priv->pci_area & 0xf0000000);
|
||||
|
||||
/* map PCI accesses to target BAR1 to Linux kernel memory 1:1 */
|
||||
ahbadr = 0xf0000000 & (u32)__pa(PAGE_ALIGN((unsigned long) &_end));
|
||||
REGSTORE(regs->page1, ahbadr);
|
||||
|
||||
/* translate I/O accesses to 0, I/O Space always @ PCI low 64Kbytes */
|
||||
REGSTORE(regs->iomap, REGLOAD(regs->iomap) & 0x0000ffff);
|
||||
|
||||
/* disable and clear pending interrupts */
|
||||
REGSTORE(regs->irq, 0);
|
||||
|
||||
/* Setup BAR0 outside access range so that it does not conflict with
|
||||
* peripheral DMA. There is no need to set up the PAGE0 register.
|
||||
*/
|
||||
grpci1_cfg_w32(priv, TGT, 0, PCI_BASE_ADDRESS_0, 0xffffffff);
|
||||
grpci1_cfg_r32(priv, TGT, 0, PCI_BASE_ADDRESS_0, &bar_sz);
|
||||
bar_sz = ~bar_sz + 1;
|
||||
pciadr = priv->pci_area - bar_sz;
|
||||
grpci1_cfg_w32(priv, TGT, 0, PCI_BASE_ADDRESS_0, pciadr);
|
||||
|
||||
/*
|
||||
* Setup the Host's PCI Target BAR1 for other peripherals to access,
|
||||
* and do DMA to the host's memory.
|
||||
*/
|
||||
grpci1_cfg_w32(priv, TGT, 0, PCI_BASE_ADDRESS_1, ahbadr);
|
||||
|
||||
/*
|
||||
* Setup Latency Timer and cache line size. Default cache line
|
||||
* size will result in poor performance (256 word fetches), 0xff
|
||||
* will set it according to the max size of the PCI FIFO.
|
||||
*/
|
||||
grpci1_cfg_w8(priv, TGT, 0, PCI_CACHE_LINE_SIZE, 0xff);
|
||||
grpci1_cfg_w8(priv, TGT, 0, PCI_LATENCY_TIMER, 0x40);
|
||||
|
||||
/* set as bus master, enable pci memory responses, clear status bits */
|
||||
grpci1_cfg_r32(priv, TGT, 0, PCI_COMMAND, &data);
|
||||
data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
|
||||
grpci1_cfg_w32(priv, TGT, 0, PCI_COMMAND, data);
|
||||
}
|
||||
|
||||
static irqreturn_t grpci1_jump_interrupt(int irq, void *arg)
|
||||
{
|
||||
struct grpci1_priv *priv = arg;
|
||||
dev_err(priv->dev, "Jump IRQ happened\n");
|
||||
return IRQ_NONE;
|
||||
}
|
||||
|
||||
/* Handle GRPCI1 Error Interrupt */
|
||||
static irqreturn_t grpci1_err_interrupt(int irq, void *arg)
|
||||
{
|
||||
struct grpci1_priv *priv = arg;
|
||||
u32 status;
|
||||
|
||||
grpci1_cfg_r16(priv, TGT, 0, PCI_STATUS, &status);
|
||||
status &= priv->pci_err_mask;
|
||||
|
||||
if (status == 0)
|
||||
return IRQ_NONE;
|
||||
|
||||
if (status & PCI_STATUS_PARITY)
|
||||
dev_err(priv->dev, "Data Parity Error\n");
|
||||
|
||||
if (status & PCI_STATUS_SIG_TARGET_ABORT)
|
||||
dev_err(priv->dev, "Signalled Target Abort\n");
|
||||
|
||||
if (status & PCI_STATUS_REC_TARGET_ABORT)
|
||||
dev_err(priv->dev, "Received Target Abort\n");
|
||||
|
||||
if (status & PCI_STATUS_REC_MASTER_ABORT)
|
||||
dev_err(priv->dev, "Received Master Abort\n");
|
||||
|
||||
if (status & PCI_STATUS_SIG_SYSTEM_ERROR)
|
||||
dev_err(priv->dev, "Signalled System Error\n");
|
||||
|
||||
if (status & PCI_STATUS_DETECTED_PARITY)
|
||||
dev_err(priv->dev, "Parity Error\n");
|
||||
|
||||
/* Clear handled INT TYPE IRQs */
|
||||
grpci1_cfg_w16(priv, TGT, 0, PCI_STATUS, status);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int grpci1_of_probe(struct platform_device *ofdev)
|
||||
{
|
||||
struct grpci1_regs *regs;
|
||||
struct grpci1_priv *priv;
|
||||
int err, len;
|
||||
const int *tmp;
|
||||
u32 cfg, size, err_mask;
|
||||
struct resource *res;
|
||||
|
||||
if (grpci1priv) {
|
||||
dev_err(&ofdev->dev, "only one GRPCI1 supported\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
if (ofdev->num_resources < 3) {
|
||||
dev_err(&ofdev->dev, "not enough APB/AHB resources\n");
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
priv = devm_kzalloc(&ofdev->dev, sizeof(*priv), GFP_KERNEL);
|
||||
if (!priv) {
|
||||
dev_err(&ofdev->dev, "memory allocation failed\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
platform_set_drvdata(ofdev, priv);
|
||||
priv->dev = &ofdev->dev;
|
||||
|
||||
/* find device register base address */
|
||||
res = platform_get_resource(ofdev, IORESOURCE_MEM, 0);
|
||||
regs = devm_request_and_ioremap(&ofdev->dev, res);
|
||||
if (!regs) {
|
||||
dev_err(&ofdev->dev, "io-regs mapping failed\n");
|
||||
return -EADDRNOTAVAIL;
|
||||
}
|
||||
|
||||
/*
|
||||
* check that we're in Host Slot and that we can act as a Host Bridge
|
||||
* and not only as target/peripheral.
|
||||
*/
|
||||
cfg = REGLOAD(regs->cfg_stat);
|
||||
if ((cfg & CFGSTAT_HOST) == 0) {
|
||||
dev_err(&ofdev->dev, "not in host system slot\n");
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
/* check that BAR1 support 256 MByte so that we can map kernel space */
|
||||
REGSTORE(regs->page1, 0xffffffff);
|
||||
size = ~REGLOAD(regs->page1) + 1;
|
||||
if (size < 0x10000000) {
|
||||
dev_err(&ofdev->dev, "BAR1 must be at least 256MByte\n");
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
/* hardware must support little-endian PCI (byte-twisting) */
|
||||
if ((REGLOAD(regs->page0) & PAGE0_BTEN) == 0) {
|
||||
dev_err(&ofdev->dev, "byte-twisting is required\n");
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
priv->regs = regs;
|
||||
priv->irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
|
||||
dev_info(&ofdev->dev, "host found at 0x%p, irq%d\n", regs, priv->irq);
|
||||
|
||||
/* Find PCI Memory, I/O and Configuration Space Windows */
|
||||
priv->pci_area = ofdev->resource[1].start;
|
||||
priv->pci_area_end = ofdev->resource[1].end+1;
|
||||
priv->pci_io = ofdev->resource[2].start;
|
||||
priv->pci_conf = ofdev->resource[2].start + 0x10000;
|
||||
priv->pci_conf_end = priv->pci_conf + 0x10000;
|
||||
priv->pci_io_va = (unsigned long)ioremap(priv->pci_io, 0x10000);
|
||||
if (!priv->pci_io_va) {
|
||||
dev_err(&ofdev->dev, "unable to map PCI I/O area\n");
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
printk(KERN_INFO
|
||||
"GRPCI1: MEMORY SPACE [0x%08lx - 0x%08lx]\n"
|
||||
" I/O SPACE [0x%08lx - 0x%08lx]\n"
|
||||
" CONFIG SPACE [0x%08lx - 0x%08lx]\n",
|
||||
priv->pci_area, priv->pci_area_end-1,
|
||||
priv->pci_io, priv->pci_conf-1,
|
||||
priv->pci_conf, priv->pci_conf_end-1);
|
||||
|
||||
/*
|
||||
* I/O Space resources in I/O Window mapped into Virtual Adr Space
|
||||
* We never use low 4KB because some devices seem have problems using
|
||||
* address 0.
|
||||
*/
|
||||
priv->info.io_space.name = "GRPCI1 PCI I/O Space";
|
||||
priv->info.io_space.start = priv->pci_io_va + 0x1000;
|
||||
priv->info.io_space.end = priv->pci_io_va + 0x10000 - 1;
|
||||
priv->info.io_space.flags = IORESOURCE_IO;
|
||||
|
||||
/*
|
||||
* grpci1 has no prefetchable memory, map everything as
|
||||
* non-prefetchable memory
|
||||
*/
|
||||
priv->info.mem_space.name = "GRPCI1 PCI MEM Space";
|
||||
priv->info.mem_space.start = priv->pci_area;
|
||||
priv->info.mem_space.end = priv->pci_area_end - 1;
|
||||
priv->info.mem_space.flags = IORESOURCE_MEM;
|
||||
|
||||
if (request_resource(&iomem_resource, &priv->info.mem_space) < 0) {
|
||||
dev_err(&ofdev->dev, "unable to request PCI memory area\n");
|
||||
err = -ENOMEM;
|
||||
goto err1;
|
||||
}
|
||||
|
||||
if (request_resource(&ioport_resource, &priv->info.io_space) < 0) {
|
||||
dev_err(&ofdev->dev, "unable to request PCI I/O area\n");
|
||||
err = -ENOMEM;
|
||||
goto err2;
|
||||
}
|
||||
|
||||
/* setup maximum supported PCI buses */
|
||||
priv->info.busn.name = "GRPCI1 busn";
|
||||
priv->info.busn.start = 0;
|
||||
priv->info.busn.end = 15;
|
||||
|
||||
grpci1priv = priv;
|
||||
|
||||
/* Initialize hardware */
|
||||
grpci1_hw_init(priv);
|
||||
|
||||
/*
|
||||
* Get PCI Interrupt to System IRQ mapping and setup IRQ handling
|
||||
* Error IRQ. All PCI and PCI-Error interrupts are shared using the
|
||||
* same system IRQ.
|
||||
*/
|
||||
leon_update_virq_handling(priv->irq, grpci1_pci_flow_irq, "pcilvl", 0);
|
||||
|
||||
priv->irq_map[0] = grpci1_build_device_irq(1);
|
||||
priv->irq_map[1] = grpci1_build_device_irq(2);
|
||||
priv->irq_map[2] = grpci1_build_device_irq(3);
|
||||
priv->irq_map[3] = grpci1_build_device_irq(4);
|
||||
priv->irq_err = grpci1_build_device_irq(5);
|
||||
|
||||
printk(KERN_INFO " PCI INTA..D#: IRQ%d, IRQ%d, IRQ%d, IRQ%d\n",
|
||||
priv->irq_map[0], priv->irq_map[1], priv->irq_map[2],
|
||||
priv->irq_map[3]);
|
||||
|
||||
/* Enable IRQs on LEON IRQ controller */
|
||||
err = devm_request_irq(&ofdev->dev, priv->irq, grpci1_jump_interrupt, 0,
|
||||
"GRPCI1_JUMP", priv);
|
||||
if (err) {
|
||||
dev_err(&ofdev->dev, "ERR IRQ request failed: %d\n", err);
|
||||
goto err3;
|
||||
}
|
||||
|
||||
/* Setup IRQ handler for access errors */
|
||||
err = devm_request_irq(&ofdev->dev, priv->irq_err,
|
||||
grpci1_err_interrupt, IRQF_SHARED, "GRPCI1_ERR",
|
||||
priv);
|
||||
if (err) {
|
||||
dev_err(&ofdev->dev, "ERR VIRQ request failed: %d\n", err);
|
||||
goto err3;
|
||||
}
|
||||
|
||||
tmp = of_get_property(ofdev->dev.of_node, "all_pci_errors", &len);
|
||||
if (tmp && (len == 4)) {
|
||||
priv->pci_err_mask = ALL_PCI_ERRORS;
|
||||
err_mask = IRQ_ALL_ERRORS << IRQ_MASK_BIT;
|
||||
} else {
|
||||
priv->pci_err_mask = DEF_PCI_ERRORS;
|
||||
err_mask = IRQ_DEF_ERRORS << IRQ_MASK_BIT;
|
||||
}
|
||||
|
||||
/*
|
||||
* Enable Error Interrupts. PCI interrupts are unmasked once request_irq
|
||||
* is called by the PCI Device drivers
|
||||
*/
|
||||
REGSTORE(regs->irq, err_mask);
|
||||
|
||||
/* Init common layer and scan buses */
|
||||
priv->info.ops = &grpci1_ops;
|
||||
priv->info.map_irq = grpci1_map_irq;
|
||||
leon_pci_init(ofdev, &priv->info);
|
||||
|
||||
return 0;
|
||||
|
||||
err3:
|
||||
release_resource(&priv->info.io_space);
|
||||
err2:
|
||||
release_resource(&priv->info.mem_space);
|
||||
err1:
|
||||
iounmap((void *)priv->pci_io_va);
|
||||
grpci1priv = NULL;
|
||||
return err;
|
||||
}
|
||||
|
||||
static struct of_device_id grpci1_of_match[] = {
|
||||
{
|
||||
.name = "GAISLER_PCIFBRG",
|
||||
},
|
||||
{
|
||||
.name = "01_014",
|
||||
},
|
||||
{},
|
||||
};
|
||||
|
||||
static struct platform_driver grpci1_of_driver = {
|
||||
.driver = {
|
||||
.name = "grpci1",
|
||||
.owner = THIS_MODULE,
|
||||
.of_match_table = grpci1_of_match,
|
||||
},
|
||||
.probe = grpci1_of_probe,
|
||||
};
|
||||
|
||||
static int __init grpci1_init(void)
|
||||
{
|
||||
return platform_driver_register(&grpci1_of_driver);
|
||||
}
|
||||
|
||||
subsys_initcall(grpci1_init);
|
||||
Loading…
Reference in a new issue