diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index c77dc08b1202..129359f775d0 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -409,6 +409,7 @@ config REGULATOR_MAX8952 config REGULATOR_MAX8973 tristate "Maxim MAX8973 voltage regulator " depends on I2C + depends on THERMAL && THERMAL_OF select REGMAP_I2C help The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down diff --git a/drivers/regulator/max8973-regulator.c b/drivers/regulator/max8973-regulator.c index 5b75b7c2e3ea..08d2f13eca00 100644 --- a/drivers/regulator/max8973-regulator.c +++ b/drivers/regulator/max8973-regulator.c @@ -38,6 +38,9 @@ #include #include #include +#include +#include +#include /* Register definitions */ #define MAX8973_VOUT 0x0 @@ -74,6 +77,7 @@ #define MAX8973_WDTMR_ENABLE BIT(6) #define MAX8973_DISCH_ENBABLE BIT(5) #define MAX8973_FT_ENABLE BIT(4) +#define MAX77621_T_JUNCTION_120 BIT(7) #define MAX8973_CKKADV_TRIP_MASK 0xC #define MAX8973_CKKADV_TRIP_DISABLE 0xC @@ -93,6 +97,12 @@ #define MAX8973_VOLATGE_STEP 6250 #define MAX8973_BUCK_N_VOLTAGE 0x80 +#define MAX77621_CHIPID_TJINT_S BIT(0) + +#define MAX77621_NORMAL_OPERATING_TEMP 100000 +#define MAX77621_TJINT_WARNING_TEMP_120 120000 +#define MAX77621_TJINT_WARNING_TEMP_140 140000 + enum device_id { MAX8973, MAX77621 @@ -112,6 +122,9 @@ struct max8973_chip { int curr_gpio_val; struct regulator_ops ops; enum device_id id; + int junction_temp_warning; + int irq; + struct thermal_zone_device *tz_device; }; /* @@ -391,6 +404,10 @@ static int max8973_init_dcdc(struct max8973_chip *max, if (pdata->control_flags & MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE) control1 |= MAX8973_FREQSHIFT_9PER; + if ((pdata->junction_temp_warning == MAX77621_TJINT_WARNING_TEMP_120) && + (max->id == MAX77621)) + control2 |= MAX77621_T_JUNCTION_120; + if (!(pdata->control_flags & MAX8973_CONTROL_PULL_DOWN_ENABLE)) control2 |= MAX8973_DISCH_ENBABLE; @@ -457,6 +474,79 @@ static int max8973_init_dcdc(struct max8973_chip *max, return ret; } +static int max8973_thermal_read_temp(void *data, int *temp) +{ + struct max8973_chip *mchip = data; + unsigned int val; + int ret; + + ret = regmap_read(mchip->regmap, MAX8973_CHIPID1, &val); + if (ret < 0) { + dev_err(mchip->dev, "Failed to read register CHIPID1, %d", ret); + return ret; + } + + /* +1 degC to trigger cool devive */ + if (val & MAX77621_CHIPID_TJINT_S) + *temp = mchip->junction_temp_warning + 1000; + else + *temp = MAX77621_NORMAL_OPERATING_TEMP; + + return 0; +} + +static irqreturn_t max8973_thermal_irq(int irq, void *data) +{ + struct max8973_chip *mchip = data; + + thermal_zone_device_update(mchip->tz_device); + + return IRQ_HANDLED; +} + +static const struct thermal_zone_of_device_ops max77621_tz_ops = { + .get_temp = max8973_thermal_read_temp, +}; + +static int max8973_thermal_init(struct max8973_chip *mchip) +{ + struct thermal_zone_device *tzd; + struct irq_data *irq_data; + unsigned long irq_flags = 0; + int ret; + + if (mchip->id != MAX77621) + return 0; + + tzd = devm_thermal_zone_of_sensor_register(mchip->dev, 0, mchip, + &max77621_tz_ops); + if (IS_ERR(tzd)) { + ret = PTR_ERR(tzd); + dev_err(mchip->dev, "Failed to register thermal sensor: %d\n", + ret); + return ret; + } + + if (mchip->irq <= 0) + return 0; + + irq_data = irq_get_irq_data(mchip->irq); + if (irq_data) + irq_flags = irqd_get_trigger_type(irq_data); + + ret = devm_request_threaded_irq(mchip->dev, mchip->irq, NULL, + max8973_thermal_irq, + IRQF_ONESHOT | IRQF_SHARED | irq_flags, + dev_name(mchip->dev), mchip); + if (ret < 0) { + dev_err(mchip->dev, "Failed to request irq %d, %d\n", + mchip->irq, ret); + return ret; + } + + return 0; +} + static const struct regmap_config max8973_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -521,6 +611,11 @@ static struct max8973_regulator_platform_data *max8973_parse_dt( pdata->control_flags |= MAX8973_CONTROL_CLKADV_TRIP_DISABLED; } + pdata->junction_temp_warning = MAX77621_TJINT_WARNING_TEMP_140; + ret = of_property_read_u32(np, "junction-warn-millicelsius", &pval); + if (!ret && (pval <= MAX77621_TJINT_WARNING_TEMP_120)) + pdata->junction_temp_warning = MAX77621_TJINT_WARNING_TEMP_120; + return pdata; } @@ -608,6 +703,7 @@ static int max8973_probe(struct i2c_client *client, max->enable_external_control = pdata->enable_ext_control; max->curr_gpio_val = pdata->dvs_def_state; max->curr_vout_reg = MAX8973_VOUT + pdata->dvs_def_state; + max->junction_temp_warning = pdata->junction_temp_warning; if (gpio_is_valid(max->enable_gpio)) max->enable_external_control = true; @@ -718,6 +814,7 @@ static int max8973_probe(struct i2c_client *client, return ret; } + max8973_thermal_init(max); return 0; } diff --git a/include/linux/regulator/max8973-regulator.h b/include/linux/regulator/max8973-regulator.h index f6a8a16a0d4d..2fcb9980262a 100644 --- a/include/linux/regulator/max8973-regulator.h +++ b/include/linux/regulator/max8973-regulator.h @@ -54,6 +54,10 @@ * @reg_init_data: The regulator init data. * @control_flags: Control flags which are ORed value of above flags to * configure device. + * @junction_temp_warning: Junction temp in millicelcius on which warning need + * to be set. Thermal functionality is only supported on + * MAX77621. The threshold warning supported by MAX77621 + * are 120C and 140C. * @enable_ext_control: Enable the voltage enable/disable through external * control signal from EN input pin. If it is false then * voltage output will be enabled/disabled through EN bit of @@ -67,6 +71,7 @@ struct max8973_regulator_platform_data { struct regulator_init_data *reg_init_data; unsigned long control_flags; + unsigned long junction_temp_warning; bool enable_ext_control; int enable_gpio; int dvs_gpio;