platform/chrome: Move cros-ec transport drivers to drivers/platform.

There are some cros-ec transport drivers (I2C, SPI) living in MFD, while
others (LPC) living in drivers/platform. The transport drivers are more
platform specific. So, move the I2C and SPI transport drivers to the
platform/chrome directory. The patch also removes the MFD_ prefix of
their Kconfig symbols.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benson Leung <bleung@chromium.org>

drivers/mfd/Kconfig

@@ -202,26 +202,6 @@ config MFD_CROS_EC
 	  You also need to enable the driver for the bus you are using. The
 	  protocol for talking to the EC is defined by the bus driver.
 
-config MFD_CROS_EC_I2C
-	tristate "ChromeOS Embedded Controller (I2C)"
-	depends on MFD_CROS_EC && I2C
-
-	help
-	  If you say Y here, you get support for talking to the ChromeOS
-	  EC through an I2C bus. This uses a simple byte-level protocol with
-	  a checksum. Failing accesses will be retried three times to
-	  improve reliability.
-
-config MFD_CROS_EC_SPI
-	tristate "ChromeOS Embedded Controller (SPI)"
-	depends on MFD_CROS_EC && SPI
-
-	---help---
-	  If you say Y here, you get support for talking to the ChromeOS EC
-	  through a SPI bus, using a byte-level protocol. Since the EC's
-	  response time cannot be guaranteed, we support ignoring
-	  'pre-amble' bytes before the response actually starts.
-
 config MFD_CROS_EC_CHARDEV
         tristate "Chrome OS Embedded Controller userspace device interface"
         depends on MFD_CROS_EC

drivers/mfd/Makefile

@@ -14,8 +14,6 @@ obj-$(CONFIG_MFD_BCM590XX)	+= bcm590xx.o
 obj-$(CONFIG_MFD_BD9571MWV)	+= bd9571mwv.o
 cros_ec_core-objs		:= cros_ec.o
 obj-$(CONFIG_MFD_CROS_EC)	+= cros_ec_core.o
-obj-$(CONFIG_MFD_CROS_EC_I2C)	+= cros_ec_i2c.o
-obj-$(CONFIG_MFD_CROS_EC_SPI)	+= cros_ec_spi.o
 obj-$(CONFIG_MFD_CROS_EC_CHARDEV) += cros_ec_dev.o
 obj-$(CONFIG_MFD_EXYNOS_LPASS)	+= exynos-lpass.o
 

drivers/platform/chrome/Kconfig

@@ -52,6 +52,26 @@ config CHROMEOS_TBMC
 config CROS_EC_CTL
         tristate
 
+config CROS_EC_I2C
+	tristate "ChromeOS Embedded Controller (I2C)"
+	depends on MFD_CROS_EC && I2C
+
+	help
+	  If you say Y here, you get support for talking to the ChromeOS
+	  EC through an I2C bus. This uses a simple byte-level protocol with
+	  a checksum. Failing accesses will be retried three times to
+	  improve reliability.
+
+config CROS_EC_SPI
+	tristate "ChromeOS Embedded Controller (SPI)"
+	depends on MFD_CROS_EC && SPI
+
+	---help---
+	  If you say Y here, you get support for talking to the ChromeOS EC
+	  through a SPI bus, using a byte-level protocol. Since the EC's
+	  response time cannot be guaranteed, we support ignoring
+	  'pre-amble' bytes before the response actually starts.
+
 config CROS_EC_LPC
         tristate "ChromeOS Embedded Controller (LPC)"
         depends on MFD_CROS_EC && ACPI && (X86 || COMPILE_TEST)

drivers/platform/chrome/Makefile

@@ -6,6 +6,8 @@ obj-$(CONFIG_CHROMEOS_TBMC)		+= chromeos_tbmc.o
 cros_ec_ctl-objs			:= cros_ec_sysfs.o cros_ec_lightbar.o \
 					   cros_ec_vbc.o cros_ec_debugfs.o
 obj-$(CONFIG_CROS_EC_CTL)		+= cros_ec_ctl.o
+obj-$(CONFIG_CROS_EC_I2C)		+= cros_ec_i2c.o
+obj-$(CONFIG_CROS_EC_SPI)		+= cros_ec_spi.o
 cros_ec_lpcs-objs			:= cros_ec_lpc.o cros_ec_lpc_reg.o
 cros_ec_lpcs-$(CONFIG_CROS_EC_LPC_MEC)	+= cros_ec_lpc_mec.o
 obj-$(CONFIG_CROS_EC_LPC)		+= cros_ec_lpcs.o